Ok, I'll take a stab at it.
First a question. Have there been any BERT tests end to end (NID to frame
switch interface)? If so, was an all zero's test done?
Very simply, I suspect that one of the circuit's repeaters is misconfigured
ESF, AMI. Everything works fine until the 1's density isn't
May I see your config ?
alvarcar wrote:
> Hello, everybody
> Im trying callback with 2509 (ios 11.2) and W95/98
> remote client. The first connections works but the
> callback hangs up from the client.
> I think the configuration is right, i suspect the ios
> c2500-ds-l.112-8. Do i need to upgra
Thanks for all your good info in the newsgroup!! Could have done it with out
it.
Regards,
Jacques Allison
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://ww
On 26 Sep 2000 17:24:41 -0400, Paul Borghese <[EMAIL PROTECTED]> wrote:
:Jennifer Joy sent me a suggestion that I include the "Precedence: bulk"
:header in the e-mail messages that go out from this list. Apparently the
:vacation program uses the Precedence to determine if it should send an
:auto
please take my
email off of the Group study list and the Job list...
Thanks
It is entirely up to you as to what group number you choose. Logic tends to
say you should use the same numbers so that fault finding and general logic
is easy to follow. But at the end of the day you could have group number 1
within vlan 12 if you wished.
Hope this helps.
-Original Messag
very impressive Mr Rodgers!
-Original Message-
From: Rodgers Moore [mailto:[EMAIL PROTECTED]]
Sent: 11 October 2000 07:31
To: [EMAIL PROTECTED]
Subject: Re: challenge problem
Ok, I'll take a stab at it.
First a question. Have there been any BERT tests end to end (NID to frame
switch i
hi,
To enable rommon mode try this - Break-F5 or SHIFT-F5 or Shift-6 Shift-4
Shift-b (^$B) .
Example of Password Recovery on a Cisco 2500
The example shown here is password recovery on a Cisco 2500.
Router>en
Password:
Password:
Password:
% Bad secrets
HI all,
I need to know what I need to complete the CCDP ver 2.0 certification. I
currently have my CCN 1.0, FRS 1.0, CIT, and CCIE written.
Question:
1. Do I need to complete FRS 2.0, CCDA 2.0, and CID exam to get the CCDP ver
2.0??
2. Where can I get the objectives for the CCIE Design exam??
T
Hi Jacques,
for CCDP check
http://www.cisco.com/warp/customer/10/wwtraining/certprog/lan2/programs/ccdp
.html
there are no version 2.0 exams for the design track, yet, so there isn't
really a CCDP version 2, as of now.
Thus, you would need the DCN Exam (640-441) & the CID Exam (640-025) for
CCDP.
Hi,
I used the Boson test for BCRAN (test #1) and I found it very useful. The
questions were almost the same as in the BCRAN exam.
-Tapani-
Rod Christie wrote:
> Hi all,
>
> I've used the Boson tests for BCMSN (test #1, Harder than the actual exam,
> which use great!). But now its time for BCR
Derek,
Apart from the booklist at www.groupstudy.com
I'm using www.certificationzone.com for white papers
and Mock CCIE tests. I've just purchased CIM from
Cisco for CCIE Lab, ISDN and DCN, as I felt my
progress has been to slow of late.
regards,
Phil.
--- "Winchester, Derek S."
<[EMAIL PR
Guys,
Did you try any testing equipment for E1/E3?
We are looking to buy one, but we don't have experince what is the best and
what are the features that we should look for?
Thanks
___
Say Bye to Slow Internet!
http://www.home.com/xinbox
How do you manage to prepare for the written exam?
Thanks
Vincent Chong
""Jacques Allison"" <[EMAIL PROTECTED]> wrote in message
8s14dd$2m9$[EMAIL PROTECTED]">news:8s14dd$2m9$[EMAIL PROTECTED]...
> Thanks for all your good info in the newsgroup!! Could have done it with
out
> it.
>
> Regards,
>
Dear Friends,
I have 2501 which was working perfect for past 3 years.
Suddenly last week, we found that the router is not working. We were not able to
telnet to it. also we were not able to connect to it thru console port.Also the
ping was failing.
We kept the router aside and purchased a
HI Group
Just want to get some ideas from you all wrt time taken to get certified.
How long does it take the average person to complete his CCNA and then his
CCNP.
Even if you haven't completed these yet please let me know how long you
think you will take.
Thanks
Pieter Jordaan
R&D Consultan
For the link below - It says that for CCDP the Prerequisites are "Valid CCNA
and CCDA certifications." Does this mean that you only need one of the two,
or Both?
"Thomas Meyer"" <[EMAIL PROTECTED]> wrote in message
8s1doh$cej$[EMAIL PROTECTED]">news:8s1doh$cej$[EMAIL PROTECTED]...
> Hi Jacques
Group,
Has anyone experienced the Cisco online testing site...
http://www.cisco.com/pcgi-bin/colt/ColtLogin.pl?MODULEID=2467&SUBMIT=Take+Te
Thanks in advance for any information. Secondly, are the Boson test
engines something to invest in for the CCNP track?
Robert M. Lopez
Network Planning
Thanks Jay,
Remember the size of this list makes it very unmanagable and just increases
the probablility of an Out-of-Office reply. The group was originally
designed using a simple majordomo mailing list. But quickly became too big
for the software and now uses majordomo on top of a bunch of pa
Is anyone aware of any targeted study aids for ccie-isp/dial written and/or
lab? Anyone currently pursuing this certification goal? What is your study
plan? I'd like to compare.
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.ht
Greetings Guys,
I need some help with configuring an 802 router to accept in-band calls for
trouble shooting purposes. I need the line to come up if I attempt a telnet
into it (only telnet traffic). Any suggestions I'm researching Cisco's
site and some books in the meanwhile.
802
My test history from galton.com/~cisco
CCNA 1.0 #640-407 Jul 17 2000 P
DCN #640-441 Jul 19 2000 P
Exam #640-503 Aug 23 2000 P
Exam #640-504 Sep 11 2000 P
Exam #640-505 Sep 22 2000 P
Exam #640-506 Sep 25 2000 P
"Pieter Jordaan" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">n
On Tue, 10 Oct 2000, whatshakin wrote:
> Please explain how you got this: 1.544Mbps = 192KB/sec
He was no doubt doing one of:
1544999/8
193124
1536999/8
192124
but yeah basically a t1 is 192KB/s
>
> - Original Message -
> From: Arun Upadhyay <[EMAIL PROTECTED]>
> To: <[EMAIL PROTEC
Building Scalable Cisco Networks (Cisco Career Certifications) Diane
Teare, Catherine Paquet Trade Paperback October 12, 2000
BCSN: Building Cisco Scalable Networks (Book/CD-ROM package)
Thomas M. Thomas,Tan Nam-Kee,Arjan Aelmans
Hardcover September 26, 2000
Hav
On Wed, 11 Oct 2000, Jacques Allison wrote:
> For the link below - It says that for CCDP the Prerequisites are "Valid CCNA
> and CCDA certifications." Does this mean that you only need one of the two,
> or Both?
>
you need both.
>
>
> "Thomas Meyer"" <[EMAIL PROTECTED]> wrote in message
> 8
Patrick,
What did you use for your study material as it relates to 640-503 through
640-506
Robert Lopez
Network Planning
Pfizer
-Original Message-
From: Patrick Bass [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 11, 2000 9:32 AM
To: [EMAIL PROTECTED]
Subject: Re: CCNP
My test
Kinda silly replying to my own message but I'm sure there are others who
might want to know the answer. I talked with TAC, and one of their people
said that nine switches is the limit before you start having network
problems. However, they really don't recommend you to have over seven
chained t
Yes I have used that site to prepare for the Support Exam I think its great!
Lonnie
""Lopez, Robert"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Group,
>
> Has anyone experienced the Cisco online testing site...
>
http://www.cisco.com/pcgi-bin/colt/ColtLo
Hardware failure of some sort?... 3 years in
production is a long time, you may just want to retire the router since you have
a 2611..
""kaushal Bhatt"" <[EMAIL PROTECTED]>
wrote in message 004401c03384$eeebbbe0$[EMAIL PROTECTED]">news:004401c03384$eeebbbe0$[EMAIL PROTECTED]...
Dear Fr
If you have CCO access you can download the latest IOS for the PIX and
upgrade it like you would any other router. If you don't have CCO access,
then you need to get it in order to do the upgrade.
Russ..
""Saravanan Elango"" <[EMAIL PROTECTED]> wrote in message
8ru9rk$d77$[EMAIL PROTECTED]">new
I do not believe that CBT makes Training
specifically for the CCNP exams. I do know that they have courses for Cisco
technologies that would help prepare for the exams.
Lonnie
"manoj kumar" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
I am f
Is it necessary to reboot router after changing bandwidth?
_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.c
I have just finished my CCNP and got a job in design starting in two or thee
weeks time. My new employer is also exited with my background with NT and
Novell. As a support guy how would I be productive from day one in
internetworking design environment?.
Would CCDA books be for any help ?.
I used the online tests for the BSCN and BCMSN, and found at least 5
questions on the exams to be identical to the ones online. I believe that
the online questions are from the beta tests, and were supposedly ones that
they did not use in the live testing pool. But again, some SEEMED to be
ident
Ben,
This is great for studying or just reviewing general knowledge. Keep up the
GREAT work.
Hope I get to study CCDA soon. (Currently working on BSCN)
Daniel,
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Ben
Sent: Tuesday, October 10, 2000 1:25 AM
no
-Original Message-
From: Peter Gray [mailto:[EMAIL PROTECTED]]
Sent: 11 October 2000 21:04
To: [EMAIL PROTECTED]
Subject: Bandwidth change
Is it necessary to reboot router after changing bandwidth?
_
Get Your Pri
If anyone has the SNA/ATM/VOICE/Security class materials and would like to
sell, please email me what you would think is a fair price. Thanks
Brian
---
Brian Feeny, CCNP, CCDP [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc.
No. There are very few things that necessitate rebooting of a router, aside
from an IOS upgrade, or if you change lots of appletalk settings and they
don't work.
Craig Johnson, CCNP, CCDP
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Peter Gray
Sent:
What specifically is the job you are doing? I recently changed careers and
found "hitting the ground running" to be easy if you know specifically what
your job entails.
Denis
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
mindiani mindiani
Sent: Wedne
I have used several of the CBT sustems Cisco
Technologies CBTs and must say that I would prefer good books, Boson
exams, lists such as this and good hands on to them. To me, they seemed
slow, difficult to navigate, not completely thorough with regards to the
material and quite frankly not
I intend to take the Remote Access test next week and have heard good things
about the Boson tests for other CCNP exams. Has anyone either of the BCRAN
tests? If they are good which of the two would you recommend?
Thanks in advance,
Nathan Miller
_
FAQ, list arc
On Wed, Oct 11, 2000 at 08:08:12AM -0700, Joseph Ezerski wrote:
> You could certainly adjust the delay timers to a higher threshold to
> minimize STP convergence probs. I am sure TAC told you this, but I wanted
> to include it for the mail group.
Setting the diameter value changes the timers for
What seems to make the best impression is:
Eagerness to Learn, The ability to Listen, and asking relevant questions
when the timing is appropriate.
Don't concentrate on being super-efficient from Day-1. Instead, Observe the
people you will be working around. Take note of Prevailing dress-code
Title: RE: challenge problem
One thing you might try is using extended ping and use different data patterns. Try 0x, 0x, 0x, 0x0810, 0x4040. I've discovered problems where certain data streams would cause problems even after the LEC says they tested. If you uncover something you
I was wondering if there was a book out that had an explanation of each
commands output. For example, I know the usefulness of the command show
controller but there is also a lot of information in the output that I'm not
able to decipher. Does such a reference exist? I was hoping to find a book
so
Yes, Get Priscilla's Top Down Network Design, Lammle's CCDA Study Guide and
maybe the DCN Cisco Press book(its good but definetly a snoozer, I have it
and although I like its content I have found myself cheek to page a few
times!) LOL! These should help, good luck!
Will
> -Original Message
>
> What did you use for your study material as it relates to 640-503 through
> 640-506
>
>
> Robert Lopez
> Network Planning
> Pfizer
>
Routing exam: www.cisco.com exclusively
Switching exam: cisco press book, cisco.com
Remote access exam: cisco press book, cisco.com
CIT: cisco press book, cisco
Dean,
Whether or not you use the VLAN id as the group ID is up to you. On my
network I have one VLAN running over one HSRP group and three others
running over another just to balance out the load on 2 T1s.
-Original Message-
From: [EMAIL PROTECTED]
Sent: Tuesday, October 10
Hi Everyone,
I need your expertise to design our extranet network. Following is the
scenario:
1. We have 3 external companies that we want to connect to our internal
network.
2. We do not want to give full access to our network. We want to have
control on what external customers see on our net
Hey,
Is there any easy way to know which IOS feature sets support NTP
(network time protocol)? I need correct time on our customer's routers for
logging (datetime) purposes.
TIA,
Chuck Church
CCNP, CCDP, MCNE, MCSE
Sr. Network Engineer
Magnacom Technologies
140 N. Rt. 303
Valley Cottage,
If it takes several minutes, isnt that an indicator of no readable image
on flash and router is booting off the rom??
Bri
On Wed, 11 Oct 2000, Russell Lusignan wrote:
> Hardware failure of some sort?... 3 years in production is a long time, you may just
>want to retire the rout
I would look for books where instead of preaching theory, there were case
studies. Look at the solutions to them.
Brian
On Wed, 11 Oct 2000, mindiani mindiani wrote:
>
> I have just finished my CCNP and got a job in design starting in two or thee
> weeks time. My new employer
Patrick,
What do you mean by routing exam on www.cisco.com? Thank you
Raheem
>From: "Patrick Bass" <[EMAIL PROTECTED]>
>Reply-To: "Patrick Bass" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Re: CCNP
>Date: Wed, 11 Oct 2000 10:57:16 -0500
>
> >
>
Has the router been moved around or bumped, etc?
Perhaps the SIMM or some chip is loose causing it not
to come up all the time. Open it up and make sure
everything is seated well, etc.
--- kaushal Bhatt <[EMAIL PROTECTED]>
wrote:
> Dear Friends,
>
> I have 2501 which was working perfect for pas
BCSN is the exam he is referring to.
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Rah Sta
> Sent: Wednesday, October 11, 2000 11:39 AM
> To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Subject: Re: CCNP
>
>
> Patrick,
>
> What do you mean by routin
Thank the group for the the imense amount of information & help provide.
Passed CCIE - R&S -88%
Thanks
Rajeev.
rajeev_ks@0
e-mail: rajeev_ks@[EMAIL PROTECTED]
--
mailmetoday is a free e-mail service from India Today Group Online that also rewards
you with cool gifts. Sign up now at http://w
Cisco Press
Internetwork Troubleshooting Handbook
ISBN 1-57870-024-8
Re: show command output, will not give all of them but it gives many and it
guides you regarding which ones to use under what circumstances.
HTH
Constance
"Lance Warner" <[EMAIL PROTECTED]> wrote in message
000701c03398$72a119e0$
I recommend the book "Top-Down Network Design." &;-)
Seriously. It was written for someone in your exact situation!
Priscilla
At 03:09 PM 10/11/00, mindiani mindiani wrote:
>I have just finished my CCNP and got a job in design starting in two or
>thee weeks time. My new employer is also exit
If your job is design, then yes, I would read up as much as you can.
CID, Top Down Network Design, and some of the Advanced Design books from
CiscoPress are probably all very good to have.
Brian
On Wed, 11 Oct 2000, mindiani mindiani wrote:
>
> I have just finished my CCNP and got a job i
You do need both CCNA and CCDA to get CCDP. If you're already a CCNP, which
it sounds like you are, then you need CCDA and CID. Aren't all these
acronyms great?
Check out the CID exam objectives here:
http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/pdf/cid.pdf
But word of caut
I haven't seen anything that lists it for all feature sets for all IOS
levels.
You may want to consider SNTP if the IOS you have doesn't do NTP. Not as
precise, but should be good to within a second or so.
>
>Hey,
>
> Is there any easy way to know which IOS feature sets support NTP
>(n
If this is enable password you can a decoder at www.boson.com. If this is
the Enable secret then you will have to do a password recover.
"Plantier, William" wrote:
> Where can I find the Password encryption decoder for Cisco encrypted
> passwords?
>
> Thanks
>
> Wm. Spencer Plantier
> LAN Engin
Hi Everyone,
There is a web server on the inside of a firewall that is not implementing
NAT and the IP address is transparent to the outside world and people
accessing the server are using the IP address from browsing which is a
security risk (hole). Authentication is through TACACS+ or applic
Title: RE: challenge problem
Jim,
I'm sure you meant to use 0x for the all 1's
test. Just clarifying.
-Original Message-From: Rampley, Jim
[mailto:[EMAIL PROTECTED]]Sent: Wednesday, October 11, 2000
10:35 AMTo: 'Fred Flinstone';
[EMAIL PROTECTED]Subject: RE: challeng
LOL! Nothing like a shameless plug now and again!
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Priscilla Oppenheimer
> Sent: Wednesday, October 11, 2000 12:44 PM
> To: mindiani mindiani; [EMAIL PROTECTED]
> Subject: Re: Need advice from the expe
On 11 Oct 2000 11:31:06 -0400, Craig Johnson <[EMAIL PROTECTED]> wrote:
:No. There are very few things that necessitate rebooting of a router, aside
:from an IOS upgrade, or if you change lots of appletalk settings and they
:don't work.
Completely deleting subinterfaces is another.
--
Jay Henn
If this is enable password you can a decoder at www.boson.com. If this is
the Enable secret then you will have to do a password recover.
"Plantier, William" wrote:
> Where can I find the Password encryption decoder for Cisco encrypted
> passwords?
>
> Thanks
>
> Wm. Spencer Plantier
> LAN Engin
On 11 Oct 2000 09:17:28 -0400, Pieter Jordaan <[EMAIL PROTECTED]> wrote:
:Just want to get some ideas from you all wrt time taken to get certified.
:
:How long does it take the average person to complete his CCNA and then his
:CCNP.
Average people don't do that. Average people become MCSEs. :-
If this is enable password you can a decoder at www.boson.com. If this is
the Enable secret then you will have to do a password recover.
"Plantier, William" wrote:
> Where can I find the Password encryption decoder for Cisco encrypted
> passwords?
>
> Thanks
>
> Wm. Spencer Plantier
> LAN Engin
Folks,
If I use a modem to connect to my routers to troubleshoot a problem when I lost
connectivity how will I be authenticated if TACCAS has being applied to that
router and connectivity is no available for authentication.
Thanks,
Juan
If this is enable password you can a decoder at www.boson.com. If this is
the Enable secret then you will have to do a password recover.
"Plantier, William" wrote:
> Where can I find the Password encryption decoder for Cisco encrypted
> passwords?
>
> Thanks
>
> Wm. Spencer Plantier
> LAN Engin
Cool! Thanks. I hope I didn't confuse you too much with my mistake.
Good luck on CCIE!
Priscilla
At 08:34 PM 10/10/00, you wrote:
> Hi Priscilla
>I found the solution.
>
> Here it is:
> 1.544Mbps = 192KB/sec
> Router begins to forward at the rate of 64KB/sec
>means it is tranf
If you are running NT or Win2000 the break will not work. 95 should
work fine and check the config reg to see if that is correct. Same
thing happened to me
Robert McIntire wrote:
I'm working with a
used 2514 router with an unknown enable password. I've tried the
standard break technique but
Add local authentication to the router by adding a username and password
combo in priv exec. Add the local parameter to the 'aaa authentication'
line in your config too.
>From: Juan Blanco <[EMAIL PROTECTED]>
>Reply-To: Juan Blanco <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Security
AND usually means both :)
Neil
""Jacques Allison"" <[EMAIL PROTECTED]> wrote in message
8s1p2i$k5q$[EMAIL PROTECTED]">news:8s1p2i$k5q$[EMAIL PROTECTED]...
> For the link below - It says that for CCDP the Prerequisites are "Valid
CCNA
> and CCDA certifications." Does this mean that you only nee
Add local authentication to the router by adding a username and password
combo in priv exec. Add the local parameter to the 'aaa authentication'
line in your config too.
>From: Juan Blanco <[EMAIL PROTECTED]>
>Reply-To: Juan Blanco <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Security
Does anyone have or know of where I can get some pics of the back side of
7513 ???
I am trying to put together a visio doc for training.
Thanks,
Shawn
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
Here is a link to the overview of the 7513. It includes front and rear
views.
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7505/cicg7500/cicg75
po.htm#xtocid24918
Don
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 11, 2000 1:1
Hi all, I may have some money to invest in lab equipment and I'm looking for
advice on what to purchase.
I have the following equipment:
Ethernet Hubs
Token Ring MAUs
2 ISDN Lines
Cisco 2501 Router
2 Cisco 2503 Routers
Cisco 2504 Router
Cisco 2512 Router
Cisco 4000M+ Router with 4 serials and 2 et
Hi all, I want to do the MCNS exam next month. Does someone have some study
notes for me, or some interesting URL.
Thanks in advance,
Gert
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
Sunrise telecom makes some nice stuff, we use their testers for t3 and
oc3.
Brian
On Wed, 11 Oct 2000, John lay wrote:
> Guys,
>
> Did you try any testing equipment for E1/E3?
> We are looking to buy one, but we don't have experince what is the best and
> what are the features
I'm looking at some of the study notes for CNX from www.optimized.com and I
can answer most situations but there are two that confuse me:
a) Significantly more than 8 bytes of "55" or "AA" hexadecimal data
appended to the end.
Four bytes get appended by the initial host (for local collisions) a
As a temporary measure until you resolve your problems it should be fine.
If you want to make it even more secure, you can add the 'service
password-encryption' to your config if it is not already there. This option
makes the router hash your local passwords with MD5 encryption.
>From: Jua
Please don't insult my intelligence. Thanks for your help though.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of ElephantChild
Sent: Wednesday, October 11, 2000 2:23 PM
To: Lance Warner
Cc: [EMAIL PROTECTED]
Subject: Re: command reference
On Wed, 11 Oc
Hi,
Can anyone tell me if the second B-channel goes down after the traffic
gets less than the in the dialer load-threshold command. If not
is there any command to bring the second B-channel down automaticaly when
there is less traffic.
Thanks,
Tarry
--
Sent through GMX FreeMail - http://www.
Well done. How long did it take you in total to achieve the almighty CCIE?
""rajeev_ks@"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
>
> Thank the group for the the imense amount of information & help provide.
>
> Passed CCIE - R&S -88%
>
> Thanks
> Rajeev.
Yes, the 2nd line will drop when the load is less than the specified.
Here is some information from the cisco site(and a link) and a command to
keep the links from "flapping".
*ppp timeout multilink link remove
This command may be used to prevent the multilink connections from flapping
when
Dunno about a book, but CCO's Command References (as opposed to the Command
Summaries) cover most of the output reasonably well.
E.g.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/rbkixol.htm
for IOS 12, or
http://www.cisco.com/univercd/cc/td/doc/product/software/ios112
Whoa... Not enough caffeine this morning? Dog die?
Please tone down your postings. If you do not like a post, simply move on.
Simply sending a flame does not help anyone.
Frankly I think his post was appropriate. There are candidates on the list
that can learn a lot from the discussion. I pe
Not very secure. The other option is not to set it and have to do password
recovery, or configure one of the Async interfaces as a backup Dialer, and
hope that it works right if you ever need it.
Original Message Follows
From: Juan Blanco <[EMAIL PROTECTED]>
To: 'Ejay Hire' <[EMAIL PR
If I remember correctly, isn't the Complete IOS documentation set available
in Paper format... It takes around 8 feet of shelf space.
Original Message Follows
From: [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: command reference
Date: Thu, 12 Oct 2000 08:5
Looks like you have a great deal of work to do.
1st thing, DNS servers are very rarely private. If these are internal
servers, they they can have NAT'd IP or only have certain network segments
to which they will answer queries. If these DNS servers are for public use
(hosting internal/external do
Hello,
Anyone has MCNS Course slides ? I don't have any other resources,
I have for BCRAN, BSMCN, and BSCN, also ICND. They are not really
useful as I passed the version 1.0
Regards,
Leonard Ong, ST, CCNP R&S+Voice, CCDP R&S, CSE, SAIR&GNU LCP, MCP, BCP
(Íõ¶°ºÀ) | [EMAIL PROTECTED] - Sha
I am preparing for the CID exam and have a question that I need some help
resolving. The CiscoPress CID book states on page 329 that a T1 uses
in-band signaling and a E1 uses out-of-band signaling. I also have the
Boson CID test #1 and it states that both use out-of-band signaling. I
wrote to J
yes it is, at a previous employer, after purchasing several 7200 and 7500
routers, we called Cisco, gave em a contract and erial numbers, and about
8 sets appeared. Like 15 books per box, real dang heavy.
Bri
On Wed, 11 Oct 2000, Ejay Hire wrote:
> If I remember correctly, isn'
Hi;
Please tell how do you prepare for the written exam and lab!
Thanks
Vincent
""Howla"" <[EMAIL PROTECTED]> wrote in message
8s2nd9$b4h$[EMAIL PROTECTED]">news:8s2nd9$b4h$[EMAIL PROTECTED]...
> Well done. How long did it take you in total to achieve the almighty CCIE?
> ""rajeev_ks@"" <[E
This is what I have to work with. I have 2 T1, each going into s0 and s1.
What can I do to enable redundancy? If the T1 in s0 fails , s1 will
automatically kick in and takeover.
Also , what monitoring software do any of you use to monitor your networks.
specifically for network outages?
Pete
HI all.
I have a conceptual question about dialer pool.
As far as I know, a physical interface can belong to
numerous dialer pools.
Then here is a configuration.
interface dialer1
.
.
.
dialer pool1
!
interface dialer2
.
.
.
dialer pool2
Like I said, one physical interface belongs to dialer
pool1
Can anyone recommend a good reference for voice over IP? I am now working
with VoIP and need to find a good book / document for a "crash" course and
an ongoing reference.
P.S. Before anyone gets started on it... where are there instructions for
searching the archives since I am sure this has be
On Wed, 11 Oct 2000, Alldread AK2 Robert J wrote:
> I am preparing for the CID exam and have a question that I need some help
> resolving. The CiscoPress CID book states on page 329 that a T1 uses
> in-band signaling and a E1 uses out-of-band signaling. I also have the
> Boson CID test #1 and i
1 - 100 of 135 matches
Mail list logo
