the new questions are in http://www.geocities.com/nagendra_pratap_singh
the dnload is 70 KB !!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10545&t=10545
--
FAQ, list archives, and subscription info: http://www.groupstudy.com
I am trying to implement a Radius dial access configuration, using
Ciscosecure 2.6 for Windows. I have noticed the following:
When I set up my NaS and AAA server for radius, the client can only be
properly authenticated with PAP. If I use chap, then apparently the NAS
refuses to authenticate, a
the new questions are in http://www.geocities.com/nagendra_pratap_singh
the dnload is 70 KB !!
mailto:[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10548&t=10548
--
FAQ, list archives, and subscription info:
Hi,
ISDN backup works, when EIGRP stops seeing hellos, the ISDN backup kicks in.
The problem is because the Ethernet interface (e1) is still in the routing
table all routes to the network e1 in on, are still sent via e1.
The config:
The main link, wireless bridge from switch at 192.168.10.1
What kind of Database is this being authenticated to? NT SAM, LDAP,...?
""nrf"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am trying to implement a Radius dial access configuration, using
> Ciscosecure 2.6 for Windows. I have noticed the following:
>
> When I set up my Na
B4 answering what is going wrong, could you see anything
in the RADIUS log?
That should give some hints.
Gary
""nrf"" I am trying to set up a L2F VPDN, using CiscoSecure for Windows
(acting as
a
> Radius server). I have yet to actually get the VPDN up.
>
> I believe that the problem has somet
John
I have the best luck with both price and speedy deliver
with www.BookPool.com which only has technical books and are a fraction of
the price you see on Amazon or any of the other sites..give them a try
-danny
""[EMAIL PROTECTED] (John Nemeth)"" wrote in
message [EMAIL PROTECTED]">news:[
Walmart.com has Cisco Press books and other technical books at prices better
than most every where else.
""Danny Lane"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> John
> I have the best luck with both price and speedy deliver
> with www.BookPool.com which only has technical
Doyle's TCP/IP Volume II is available at my local Chapters. As is Internet
Routing Architectures by Halabi (worst case, you wait two-three days and get
it delivered). I think part of the reason that these books may not be
available in the store is that it is expected that such titles be bought
o
Hi;
I am currently undertake the Instructor course.
What is the market value for Cisco Certified Academy Instructor?
Compare with CCSI ( for CCNA)?
Best Rgds;
Vincent
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10555&t=10555
-
Hi;
Would like to know what is career opportunity of Cisco Certified Academy
Instructor(CCAI)?
Thanks
Vincent
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10556&t=10556
--
FAQ, list archives, and subscription info: http:
I am looking for a study partner for CCIE lab in the Chicago Land area.
Please respond if you are interested.
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10557&t=10557
--
FAQ, list archives, and subscription info: htt
Why don't you have the hq initiate dialing?
Kenneth wrote:
>
> Guys, I am currently configuring 12 remote sites connected via frame-relay
> to our HQ. Each site has an ISDN connection for backup to our HQ. At our
HQ,
> I have a dedicated router to accept BRI connection for these sites except I
>
Because it's on a different router (The FR connections) and I'm using the
backup interface command on the remote routers to dial into a BRI router
""Nelluri Reddy"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Why don't you have the hq initiate dialing?
>
> Kenneth wrote:
> >
I don't mean to be a pessimistic, but the last time I uploaded Cisco
material recommended from this list (that wasn't labeled Cisco), I got a
real nice virus. Norton quarantined & deleted my WIN98 into Swiss cheese
trying to contain it :o)
Just a FDisk's worth of concern
Phil
- Original Mes
Last I checked was earlier this year in the Washington DC area, where the
starting pay is $50 an hour for the Cisco Academy. I was also informed by
the director of classes, that the washout rate was very very high. This
appears to be in-line with what I've been told by our rep. from Global
Knowl
Hi, let me introduce myself, I’m half-way through my CCNP/DP studies
and I’m shooting for passing the IE written by mid-December. I also
have some real-world experience and expect to post here frequently as I
start my CCIE studies. (Hopefully more answers than questions hehe)
I’m currently studyi
Have your local telco define a hunt group that contains the numbers of the 4
bri's at headquarters. The remote ends then dial the hunt group number and
are hunted to the next available line.
Tom
""Nelluri Reddy"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Why don't you ha
Try using NT4 or 2000 with Norton Win 98 was always pants.
Karl
- Original Message -
From: "Circusnuts"
To:
Sent: Sunday, July 01, 2001 8:52 PM
Subject: Re: exam no 217 uuploaded [7:10548]
> I don't mean to be a pessimistic, but the last time I uploaded Cisco
> material recommended fr
Hi all, I am a newbie to posting here and am unsure of the conventions
etc, so please bear with me
Looking for SF Bay Area study partners for Security CCIE lab.
I recently finished the Security Specialist tests and Security qualifier
350-018 that just came out, and plan to fail the lab in e
Cisco 3640 in a hairpin configuration, with route-caching on, changes the UU
bit and the Lucent switch then counts these as DE frames, red frames/octets
and FECNs/BECNs. 7200 cisco does not have this problem as it does not change
the UU bit. The Ciscos go to a Lucent ATM switch which converts to f
Hello all,
I am starting my CCNP track and I will appreciate all the feedback I can
get.
At my work, I recently finished frame-relay, dial-up, DDR and voice
implementation. Now I want to use this knowledge to work towards my CCNP.
Our setup is small and there is no implementation of routing prot
I am want to take start taking some cisco training classes in order to get
prepared for the CCIE Routing and Switching exams. So far, I have narrow
down my search to 2 Cisco certified training centers which are Mentor
Technologies (www.mentortech) and ARS (http://www.arslimited.com). Both
school
Hi Ryan and welcome to the list.
To answer your questions, you options for studying switching (Catalyst 5000
commands) fall in 3 categories
1. Reading about configuration
2. Interactive Mentors
3. Actual configuration
#1 is free or low cost (it's a combination of http://www.cisco.com website
Hi,
I don't know about the lab but I came here to pick up snippets where I can.
I feel understanding configs and various methods are fine but what I do pick
up is that the Cisco method is the accepted method. ie If it comes out of
the CCO or CD then really learn this even though you might not u
When we consider switching ie process, fast, silicon, optimum, distributed
and netflow, I believe that there is a default type for each protocol.
>From the one book, the Cisco CIT Training guide, it says that Fast switching
is the default for all protocols except IP. It says that optimum switchi
Hi David,
Congratulations on your CCNP! I have one more exam to go and a quick
question. On the
support CIT exam, did you also have an exhibit like the BCRAN where you get
to pick the
command? I heard that on the support exam there's no exhibit and you have to
do it
letter-for-letter from memory.
Hi all,
I was wondering if anybody on this list has ever experienced the following
errors on a 7500 Series router? The following is an excerpt from CCO, but it
is the exact error that I am experiencing:
*Dec 20 06:53:08: %RSP-3-ERROR: CyBus0 error 78
*Dec 20 06:53:08: %RSP-3-ERROR: invalid page m
Heh..I noticed that same error.. even e-mailed Cisco about it..
Here's a great link that explains the default switching methods. things
changed some with IOS 12.0...
http://www.cisco.com/warp/public/63/tuning.html
Enjoy!
Mike W.
"Swart Douwe" wrote in message
[EMAIL PROTECTED]"
There was an exhibit on the CIT.. just like on BCRAN..
"Lori" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi David,
> Congratulations on your CCNP! I have one more exam to go and a quick
> question. On the
> support CIT exam, did you also have an exhibit like the BCRA
Hi all,
I am currently plotting MRTG on a Catalyst 6509 switch. But I am unable to
decipher the target code in the config file.
Target[192.168.10.254.XYZ]: 1:[EMAIL PROTECTED]
I am unable to determine which interface is XYZ referring to, as there is
no proper numbering for XYZ. There are numb
Actually, frame relay will run up to at least 45M - it's not restricted to
the same speeds as a T1. Is there anything that technically restricts it
from running at higher speeds - or at lower, come to that (I haven't
tried)? What, if anything, would prevent you from running frame relay over
a 9.
If you want to access the widest pool of Cisco related advice, check the
archives at www.groupstudy.com
It's the compilation of accumulated knowledge of the list from day 1...
Just my $.02
--- Dennis
-Original Message-
From: art news
To: [EMAIL PROTECTED]
Sent: 7/1/2001 2:45 PM
Subjec
Hi all,
Have anyone have used/work with DSDN ( Digital Switched Data Network ) from
www.switchpointnetworks.com ? They claimed "... has developed a third
generation, last-mile, IP-based communications solution that enables premium
broadband applications for subscribers in local metropolitan areas
The scoring is not weighted or curved; that is, your score is not based upon
others' score or giving certain questions more weight. It's kind of weird
the way Cisco figures your score. As soon as you pay your $100, you have
scored 300 points. If you get 0 questions right, you get a 300/1000. If yo
Hello, everybody
Now i am confusing about the burst in CAR and GTS.
In CAR, it say that
rate-limit output bps burst-normal burst-max ...
In GTS
traffic-shape group access-list bit-rate [burst-size [excess-burst-size]]
I think that bps in CAR is the same thing as the bit-rate in GTS, and
burs
Hello,
Well, I'm writing this while still in stunned amazement. Whenever I read
anyone asking about books, my first response is ALWAYS bestbookbuys.com.
It's a sniffer site that goes to about 30 different booksellers and finds
the best price for the book that one is looking for. Bookpool wins o
Hi,
I have 2 pc's connected to a Cat5 switch on ports 2/1 and 2/2. The ip's are
10.1.1.10 and 20.1.1.20. Their default gateway points to 10.1.1.100 and
20.1.1.100 respectively. Trunking in enabled on these ports. A 2620 router
with subifs. at 10.1.1.100 and 20.1.1.100 is connected to port 2/12.
Is there a way to bar telnet access to a router, but still allow SSH? If
so, what are the commands?
Thanx
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10581&t=10581
--
FAQ, list archives, and subscription info: http://www.gr
With IPX, the default encapsulation for cisco routers is novel_ether.
As there are also varying frame types and encapsulations that can be used in
straight ethernet, what would be the default encapsulation on a standard
Ethernet Segment connected to a cisco router?
You have your ethernet frame ty
Hamid,
You could always try an access list that filters ethernet addresses (list
numbers 700-799). Its not commonly used so people seem to forget about it.
HTH,
Karen
*** REPLY SEPARATOR ***
On 6/30/2001 at 8:41 AM Hamid wrote:
>Hello group
>
>How can I deny a couple o
You shouldn't configure your ports connecting to the PC's as trunk ports.
Each port needs to be a member of the correct vlan. The only port that
should be trunking is the actual port connecting to the 2620.
HTH
Mike Nygard
Network Engineer
""Cisco Nuts"" wrote in message
[EMAIL PROTECTED]">news
Hello,
Anyone looking for a Token Ring switch?
Used only in my lab, great condition.
Please contact me directly.
Thanks!
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10587&t=10587
--
FAQ, list archives, and
A great reference for all things structured cabling;
http://www.bicsi.org
Tim Medley - CCNP+Voice
Network Architect
VoIP Group
iReadyWorld
704-943-3615 - Phone
704-943-3660 - Fax
877-6-iReady - Helpdesk
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf O
Interesting... I didn't know local telco's will allow hunting of ISDN lines!
thanks!
""Tom"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Have your local telco define a hunt group that contains the numbers of the
4
> bri's at headquarters. The remote ends then dial the hunt g
Use an SNMP viewer and go to its tree, it should tell you which interface it
is.
Make sure you load the proper MIBs
""Tay Chee Yong"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> I am currently plotting MRTG on a Catalyst 6509 switch. But I am unable to
> deciphe
Absolutely. you can either use an access-class on the vty interface or just
use "transport input ssh" on the vty interface:
config t
line vty 0 4
transport input ssh
this should only allow the ssh protocol to go through instead of using the
access-class command:
http://www.cisco.com/univercd/cc/
Hello everyone,
I am having a bit of an ISDN related problem at the moment and was wondering
if anyone is able to help.
I am connecting two sites together via 128k isdn, with one site having a 2611
and the other a 1700.
I have the two sites permanently connected fine with the first B channel,
h
Hello,
I am setting up a network with a lot of old sun sparcs to use as a lab.
Is thier a way to buy an AUI hub so I can save money and not buy a ton
of transceivers?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10594&t=10594
---
There are four Ethernet frame types:
[Common Term] = [Novell Term] = [Cisco Term]
Ethernet V.2 = ETHERNET_II = arpa
IEEE 802.3 = ETHERNET_802.2 = sap
Novell 802.3 Raw = ETHERNET_802.3 = novell-ether
SNAP = ETHERNET_SNAP = snap
Arpa is default for IP, novell-ether is the default for IPX.
There'
Here is the debug isdn events output from when the 1700 disconnects:
clarendon2-gw#
04:14:10: ISDN BR0: Event: Hangup call to call id 0x801E
04:14:10: ISDN BR0: process_disconnect(): call id 0x801E, call type is DATA,
b_idb 0x809D7DF8, ces 1, cause Normal call clearing(0x10)
04:14:10: %ISDN-6-DIS
Do a "debug PPP authen" and a "debug PPP negotiation". It looks like CHAP
is failing.
Tony M.
#6172
- Original Message -
From: Sam Deckert
To:
Sent: Sunday, July 01, 2001 10:48 PM
Subject: ISDN B Channel Disconnecting Cont... [7:10596]
> Here is the debug isdn events output from when
Dear Friends,
Can anybody suggest some parameters about debug, I want to check the ip
traffic details between two point to point connections only, which options
from the debug command should I used, I just want to know the traffic flow
between two ppp points, there might be more serial and Ethe
Well here's a thread certain to start a fire, but I thought I'd see what
would happen.
Does the community feel that Cisco Certifications are still in demand in the
market place? Do they still get you through the door in anything?
I have been in the IT field for the better part of 8 years. This
Thanks Tony,
I thought that the ppp authentication was going ok, as the first channel is
always connected, however it is only the second channel that is disconnected
after 20 secs.
I was looking at the output from the debug commands you suggested, and saw
the following on the router being called
I just did a debug ppp error on both routers when dialling in, however did
not have anything come up - so not sure if the problem is with ppp. Bugger!
Here was the output:
1700 (calling):
05:51:64424509440: %LINK-3-UPDOWN: Interface BRI0:2, changed state to up
05:51:35: %ISDN-6-DISCONNECT: Inte
56 matches
Mail list logo