Hi all , I am writing my routing exam this Friday , I have studied hard ,
any body have some good ideas where to really concentrate ?
Thanks for the help
Cheers !!! Theperiman
NOTICE - This message contains privileged and confidential information
intended only for the use of the addressee nam
You are absolutely right. It didn't occur to me. It seemed to me that
one would have to go out of their way to create a loop in a hub
environment. Then after reading your response, I realized I encountered
something like this just a few months ago. 2 dual homed Citrix servers
using 2 logical subnet
All,
The MLS-RP sends hello's to the CMGP mcast address every 15 secs.
All downstream switches in the network recv these hello messages.
I have 2 6500s with a dot1q trunk and an MSFC in both. MLS enabled by
default. Sniffing the trunk and i would expect to see an MLS hello packet
every 15 secs
Hi Simon,
There is a way, but its a hack. I dont recommend you do this, but just
shows that you dont always need to attack the problem directly..
anyway here is a simple diagram
s0 s1
10.0.0.110.0.0.2
--
|
172.16.55.1
(e
Would the CCNP remote Access exam certification guide for 640-505 by
Brian Morgan and Craig Dennis be enough to pass the 640-605 exam? The
book is kind of short compared to the BCRAN book. Thanks in advance!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58871&t=58871
how did you classify your tcp packets? I think WRED treats unclassified
packets as lower priority packets (precedence=0). i saw random-drops in
precedence 0 packets.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58873&t=58784
--
F
We have the Unity/Exchange module installed and functioning but is there a
way of creating a voice mailbox WITHOUT having to create an Exchange
mailbox. We have several instances where we have employees who don't have a
PC much less a domain and email account but have a phone.
Message Posted at
Try www.altimatech.com. they have everything and will do custom stencils for
you. I downloaded thier standard package and it has over 300 Cisco stencils
""tu do"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I found a set of them.
> http://www.cisco.com/warp/public/503/2.html
for other tests, but I didnt think the lab was covered. If so, look out SJ,
here I come!
""Karl Thrasher"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
> I recently took the CCIE written. I didn't pass, but I really wasn't
> expecting to. I missed it by 6 points. A while
Hi,
I have a Cisco Router(2511) that is my NAS.
When one of my network users want to login on my NAS, I can see "Login timed
out" error message that is sent to my TACACS Server.
It's about only two week that I can see that error message. What is this
Error
message? Is there anyone who can help me a
First I would verify the TACACS+ host and key are valid - then debug TACACS
and see what you get there.
-Original Message-
From: Hamed Sedighi [mailto:[EMAIL PROTECTED]]
Sent: 10 December 2002 15:55
To: [EMAIL PROTECTED]
Subject: Error report from my Router [7:58882]
Hi,
I have a Cisco R
Peri,
I am taking my 901 on Thursday of this week as well! I have the Cisco Press
Book by Paquet, and it suppossed to cover all of the test material. I also
downloaded the IS-IS supplement from Cisco. I know NOTHING about IS-IS, so
I'm going to learn the basics and pray that there are only about 4
Voice mail in Unity is stored in priv.edb (and in priv.stm in ex2k)which is
exchanges database.
one method to access an exchange database is via MAPI which is how cisco IP
phones access their unity voicemail. You need to create the mailbox which
will allow the user to get their voice mail without p
Kevin,
Hi! I would say the best way to do something like this would probably be
using Websense (or similar software) in conjunction with your Pix. I've
setup Websense before, and it's pretty easy.
thanks,
-Brad Ellis
CCIE#5796 (R&S / Security)
Network Learning Inc
[EMAIL PROTECTED]
www.optsys.n
[EMAIL PROTECTED] wrote:
>
> All,
>
> The MLS-RP sends hello's to the CMGP mcast address every 15
> secs.
> All downstream switches in the network recv these hello
> messages.
>
> I have 2 6500s with a dot1q trunk and an MSFC in both. MLS
> enabled by
> default.
Are you sure that MLS is enabl
HI,
Can I set up a redirect traffice command in my Cisco
2600 ? I want to redirect web traffic (port 80) and
FTP traffic (port 23) to a different server instead
the default gateway. Is it possible ? Is there URL
link I can read ?
Thanks in advance
you can configure policy based routing to achieve that.
Xueyan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5&t=58887
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
I've been working a few hours with a 2610 when suddenly, boom!!, I lost my
console connection, now it doesn't respond to Ctrl-Break nor anything, I've
rebooted it several times but it doesn't shows any single character on
HyperTerminal. Unfortunately, the equipment is running (almost) default
confi
Can you use Loopback interfaces to pass OSPF traffic? Here is my example:
Router A
Interface loopback0
ip address 10.10.10.10 255.255.255.0
Interface Vlan 2
ip address 2.2.2.2 255.255.255.0
Router ospf 1
network 0.0.0.0 255.255.255.255 area 0
Router B
Interface loopback 0
ip address 10.10.10
Hi,
It's a 3550's command only.
it's disable the password-recovery procedure.
You can find more information on CCO :
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/1218ea1/3550cr/cli2.htm#xtocid1
Best regards
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58891&
Go to www.cisco.com and read about Policy-Based Routing (PBR). This may
be what you're looking for, but I'm not sure from your description. You
might need something a little different depending on what you're really
trying to accomplish. If you simply want to force http and ftp traffic
to take a
Use route maps - that should work
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: 10 December 2002 17:51
To: [EMAIL PROTECTED]
Subject: Is there a redirect traffic command in IOS ? [7:58887]
HI,
Can I set up a redirect traffice command in my Cisco
2600 ? I wa
Hi Folks,
Can anyone tell me, or point me to a link that does, what happens on a
Catalyst Switch when an MTU problem occurs ?
I know that when a router is involved, if a packet is larger than the MTU of
the interface it needs to traverse, the router would examine the 'Don't
Fragment' (DF) bit
I can't comment on this book because I haven't read it. However, I've found
that using the Cisco Press books along with the exam blueprint and CCO is
normally the best bet for success. Also, 505 materials will normally be
sufficient to pass the 605 exam.
Shawn K.
-Original Message-
From:
You could also use a TACACS+ server here and have authentication configured
for those users for any HTTP request - all others should be allowed to
access the web without authentication. This way you can track them etc and
setup specific access on the TACACS+ server.
Never used Websense some I have
The strange this is, on the MSFC,
if you type "show mls status" you get
MLS global configuration status:
global mls ip: enabled
global mls ipx:enabled
global mls ip multicast: disabled
current ip flowmask for unicast: destination only
current
Hello friends,
I would like to contact with someone who has taken
cisco exams in spain, (Madrid). I want to take the
exam on my own (without taking any course) and I would
like to know where I can take the exam and the prices.
I have a list of vue centers and prometric centers but
i would appreci
Yeah, it's not too complicated. I do this in one of my production
networks.
You need a route map that matches packets somehow - i use source
address. Then you just set the next hop to whatever you want for your
server. If your server isn't directly connected, you need to either
rewrite the dest
On Tue, 10 Dec 2002, olivier Boistel wrote:
> it's disable the password-recovery procedure.
> You can find more information on CCO :
>
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/1218ea1/3550cr/cli2.htm#xtocid1
It works on other devices apparently. I did a quick search and actually
here you'll find a few:
- Professional training (I've done every single exam here)
- Global Knowledge
- Instituto Cibernos
and a few more...
Prices for CCNA and CCNP exams around 144 + IVA each one, you might ask
them to get rid of the IVA so you can save a few s.
Good luck!!
Message Poste
Nrf, I always look forward to hearing your view. Your points are valid, and
I very much agree to your acknowledgement of the merging worlds of network
and systems engineering. As far as personnel management, though, my first
rule is to make decisions in the best interest of the company while ensuri
Haynes, Mark wrote:
>
> Hi Folks,
>
> Can anyone tell me, or point me to a link that does, what
> happens on a
> Catalyst Switch when an MTU problem occurs ?
> I know that when a router is involved, if a packet is larger
> than the MTU of
> the interface it needs to traverse, the router would
>From my experience in networking I made my mind that manual configuration
of speed and mode is the better choice.
Cisco recommends fixed configuration too.
For my surprise, 802.3 specification states:
"It is strongly recommended that Auto-Negotiation be used ..."
"Manual configuration is not
Concerning BCRAN, I don't see anything in the current exam topics that
specify the configuration of a Cisco 700 series router. The Cisco books I
have (605 series) devote an entire Chapter on this topic. Was it relevant to
the 605 exam and not the 606? I'm reading the chapter anyway as I have not
Just understand the basics of the 700 series, what it can connect to the
internal settings - LAN, System, etc..There was alittle on it when I took it
last May. Good luck.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58906&t=58871
---
__
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58907&t=58907
--
FAQ, list archives,
r1
|
|
-
| |
| |
r2 r3
In the above configuration, r2 and r3 are configured
with HSRP.
I need to configure iBGP between r1, r2 and R3. Can I
configure neighbor from r1 to r2 and r3 using the HS
I've discovered that if you have NICs that are relatively new (less than
three years) and you have updated drivers then autonegotiation works
very well. In the past it's been a rancid, evil mechanism that almost
guaranteed link failure at some point. The stability of this mechanism
has improved gr
I ran into this problem before and figured out I had to peer with the real
addresses. That worked out fine.
Xueyan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58910&t=58908
--
FAQ, list archives, and subscription info: http://w
Bill,
I agree with you in that it was very foolish to just start throwing "pink
slips" around without first finding out how these individuals may be able to
help the company. I'm sure many of them would be happy to take a pay cut and
would still be able to contribute valuable input. I don't believ
Never mind..I found my answer. Thanks!
Chris Dumais, CCNP, CNA
Sr. Network Administrator
NSS Customer and Desktop Services Team
Maine Medical Center
(207)871-6940
[EMAIL PROTECTED]
>>> "Christopher Dumais" 12/10/02 11:00:45 AM >>>
Can you use Loopback interfaces to pass OSPF traffic? Here is my
Hi Raj,
It's work now!!! :) Thanks for your advise.
Actually I'm working on the way like you described but I'm digging into the
hole in applying additional access list on the vty... that's why it fail.
Now everything is good. Thanks
Simon
""Raj Santiago"" Hi Simon,
>
>
> There is a way, but its
I used both, and found actually doing the labs to be a really good way
to cement the theory into my memory.
Some people can learn from just reading, but as a good friend mentioned
to me the other day, as I was trying to "Show" him something : "Doing is
Learning".
Symon
-Original Message-
Also, the 1600 series and the positioning of these routers (and other
routers) in the market.
Shawn K.
-Original Message-
From: John McCartney [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, December 10, 2002 2:00 PM
To: [EMAIL PROTECTED]
Subject: RE: BCRAN 640-505 [7:58871]
Just understand t
Fellas, this request just came in from a buddy of mine, if figured while I
search I was wondering if any of you have seen or used one before.
Take off your Cisco hat for second and think about this:
What device would you use to terminate a DS3 to ethernet that is ultra low
cost. I need to find a
Selcuk,
What are you tring to achieve by doing this? Switch operates at layer 2.
Unless, you are wanting to change the speed and duplex from auto to a
static, which is done by "speed 10" and "duplex half" under the interface.
If you are wanting to change metrics, then that will have an impact o
[EMAIL PROTECTED] wrote:
>
> From my experience in networking I made my mind that manual
> configuration
> of speed and mode is the better choice.
>
> Cisco recommends fixed configuration too.
>
> For my surprise, 802.3 specification states:
>
> "It is strongly recommended that Auto-Negotiati
Could you share with the rest of us? :-)
-Original Message-
From: Christopher Dumais [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, December 10, 2002 2:42 PM
To: [EMAIL PROTECTED]
Subject: Re: Loopback and OSPF [7:58890]
Never mind..I found my answer. Thanks!
Chris Dumais, CCNP, CNA
Sr. Ne
Yes indeed there are cases where setting it manually will not work, and
auto-neg needs to be in place. I've run into this with ixtreme servers
connected to 2900 switches. Tis yet another reason to test before
implementation.
Bri
On Tue, 10 Dec 2002, Priscilla Oppenheimer wrote:
> [EMA
Sounds good..
But websense is very expensive..
Wont lists do the job as well: e.g
object-group network REST-LAN-USR
network-object 10.1.x.x 255.255.255.0
object-group network Rest-SRV
network-object host 64.232.56.99
network-object host 209.123.45.67
access-list RESTRICTED permit tcp object
I took the 6490-851 yesterday. 112 questions, 120 minutes, not alot of
time to do the simulation.
I hope this question doesn't brake nondisclosure agreement. In the
simulation how far do you go? Do you need to put in commands like "no
shutdown" & "copy run start"? How many points are the Sims wort
I took the 6490-851 yesterday. 112 questions, 120 minutes, not a lot of
time to do the simulations.
I hope this question doesn't brake nondisclosure agreement. In the
simulation how far do you go? Do you need to put in commands like "no
shutdown" & "copy run start"? How many points are the Sims wo
Agreed. When you actually "do" something, it tends to stay in memory. On
most of my exams, I would read the text and then try to incorporate the
topic into my lab. It really helped to understand the topic. However, as the
original poster mentioned, there are some topics on this exam that you can't
Hi everybody. Anyone have an opinion on a good beginning book on Unix?
Thanks,
Tim.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58917&t=58917
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco
I previously mentioned that with newer hardware autonegotiation might be
the way to go. Here are some snippets from a discussion of this very
issue by people more NIC-savvy than me. It should be noted that NWAY
refers to the autonegotiation mechanism. Along with other information,
this discussio
Tell me, and I may forget;
Show me, and I may remember;
Involve me, and I'll understand.
;-)
- Original Message -
From: "Kaminski, Shawn G"
To:
Sent: Tuesday, December 10, 2002 3:38 PM
Subject: RE: Routing Exam:640-901 [7:58867]
> Agreed. When you actually "do" something, it tends to
beginning user or admin? If you're even a moderate user, there is some
admin in that.
Really, I like these books best..
O'Reilly's Essential System administration, a new edition was recently
released.
Unix System Administration handbook by Nemeth, Snyder, Seabass, hein.
Bri
On Tue, 10
At Cisco we run auto/auto on our desktop network and have few
problems..AS previously stated it is NIC and switch dependant.
-L
Priscilla Oppenheimer wrote:
>[EMAIL PROTECTED] wrote:
>
>>From my experience in networking I made my mind that manual
>>configuration
>>of speed and mode is the better
Just got finished with a weird problem and the fix was auto
negotiation on a 7200/w PA-2FE-TX. Problem was customer was seeing many
CRC errors incrmenting on FE. Unfortunately another group within our
organization monitors this customers network and one thing they monitor
are input and output err
Does anyone have real world experience with the AIM-COMPR4 product?
Cisco claims 4:1 compression. Anyone else seeing this?
Thanks!
Aaron
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58932&t=58932
--
FAQ, list archives, and s
My guess is that you for sure have to do the "no shutdown" command but
probably not the "copy run start" command. After all, you're doing a
simulation that is supposed to represent what you would actually do in a
certain situation. If you don't bring up an interface and that interface is
needed for
I am planning on doing a dual Checkpoint to dual Cat install. The Nokia FW
will be running two instances of VRRP each with dual home to the Cats.
1) Has anyone else done this?
2) What issues/problems/concerns should I keep an eye out for?
3) Does anyone have a sample config for the Cats?
4) Do you
At 07:47 PM 12/10/2002 +, jeff sicuranza wrote:
>Fellas, this request just came in from a buddy of mine, if figured while I
>search I was wondering if any of you have seen or used one before.
>
>Take off your Cisco hat for second and think about this:
>
>What device would you use to terminate a
I cant find what I'm looking for on CCO, even logged in, and its annoying
me...I'm not keen on Cisco's new site layout.
Our upstream that was have a DS3 with, has their router, a 7202 w/NPE-200,
located in our equipment room. We have been noticing a large slowdown in
the evenings sometimes.
Afte
Not to mention that someday he will have to face at least one of us
professionally.
Watch yer back Adrian, this community is still small at the higher levels
and your decision will bite you in the ass sooner or later.
-Doc-
""Kaminski, Shawn G"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL P
At 07:15 PM 12/10/2002 +, Kim Seng wrote:
>r1
> |
> |
> -
> | |
> | |
> r2 r3
>
>In the above configuration, r2 and r3 are configured
>with HSRP.
>I need to configure iBGP between r1, r2 and
At 04:00 PM 12/10/2002 +, Christopher Dumais wrote:
>Can you use Loopback interfaces to pass OSPF traffic? Here is my example:
The below routers will never form an OSPF adjacency. loopback addresses
are virtual as you likley know, and inherently stub networks (ie they
cannot be used for tra
I like
http://www.cisco.com/en/US/products/hw/modules/ps2033/products_configuration_guide_chapter09186a00801056f4.html
when talk about npe bandwidth comes up. Its a vxr specific link, but
theres a lot of npe info below, btw 7202 was eol as of jan 2002.
Bri
On Tue, 10 Dec 2002, Keith Woo
>I brought these issues to my boss attention last wednesday and on thursay he
>
>ordered me to 'clean' house. The first thing I did was to send "pink" slips
>to all
>
>4 CCIEs in the group and told them that they are fired because they don't
>know
>
>anything other than R&S. They were making $130
Hi there,
I have given 2 of my CCNP papers. Now I am confused whether to appear for
the remaining papers or wait for a while and then give them. Also, if I
should give the paper(s), should I appear for BCRAN or BSCI first? And what
should be the time frame in which I should finish giving both the e
Towards the bottom of
http://www.cisco.com/univercd/cc/td/doc/product/software/ios111/cc111/paatm3.htm
it states an npe-200 with the adapters on that page can do up to 800 SARs.
Bri
On Tue, 10 Dec 2002, Brian wrote:
> I like
>
http://www.cisco.com/en/US/products/hw/modules/ps2033/produc
""Chris Watson"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am planning on doing a dual Checkpoint to dual Cat install. The Nokia FW
> will be running two instances of VRRP each with dual home to the Cats.
>
> 2) What issues/problems/concerns should I keep an eye out for?
Y
Hi, Anybody:
Who want to discuss the questions of CCIE Written Exam
with me?
=
Hang "Danny" Chau
__
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
Message Posted at:
http://www.groupstudy.c
Hi,
Was wondering if anyone else out there has experienced PIX501 reloads
by barely doing more than looking xeyed at it! The 501 I originally had
in the lab was easily reloaded, then yesterday it seemed to give up the
ghost so I RMAed it. I got the new one and connected it to my PC on my
desk.
""Peter van Oene"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> At 07:47 PM 12/10/2002 +, jeff sicuranza wrote:
> >What device would you use to terminate a DS3 to ethernet that
> >is ultra low cost. I need to find a low cost, carrier type CPE
> >that will take a DS3 and hand
I have never used one, but there are Linux solutions as well, its really
about what you are comfortable with. I'd be willing to bet you could score
a used non vxr 7200 for a decent price via the
[EMAIL PROTECTED] mailing list or some other avenue.
Bri
- Original Message -
From: "dre"
Dave,
Do not say yours gave up the ghost please do not say that LOL. Because
mine does the exact same thing I just put it in my rack and leave it
alone, anytime I have to recable my lab I turn it off because the
slightest move of a cable and it reboots, and I hate doing it because my
dsl line some
I guess my first question would be how, after a few HOURS, there is no IP
address assigned and vty config? have you tried connecting from different
computers?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58951&t=58889
--
FAQ, lis
This is a proposed solution for local dialtone, to replace pool of copper
trunks :
Main site will be equiped w/ main PBX / Voice Mail / ACD system. Coming into
main site will be 3 leased T1's from each branch office. For local dialtone
@
the Main office, ISDN PRI is utilized. Custom call routin
I have 2 501's that I have deployed with no problems as such...
(fingers crossed )
Could the power connection in the back be loose on the inside? It might be a
manufacturing problem?
Thanks
Larry
-Original Message-
From: Elijah Savage III [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, De
send an email here.
[EMAIL PROTECTED]
they will tell you what the questions are.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58954&t=58947
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.ht
I had a similar problem on my 2610 , I bought a smartnet package and got the
box replaced from Cisco .
Navin Parwal
""R M"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I've been working a few hours with a 2610 when suddenly, boom!!, I lost my
> console connection, now it doe
On Wed, 11 Dec 2002, Adam Frederick wrote:
> How could you enable redundancy in this scenario? Since PRI is a digital
> signal what happens if there is power problems at the CO? It's not like
good
> old analog lines I would assume. Usually where I'm located, if your T1 is
> down, so is your PRI
My company is looking to migrate from CheckPoint over to Pix Firewall in the
next
couple of months and I have been assigned to this project. I have questions
about
Pix firewalls. We are a small company, less than 50 people.
a) Does pix firewall support QOS, traffic shaping or traffic
priori
Hi there,
if there is anyone out there who can help me with a small project I am
working on that would be great.
I am trying to setup a callcentre lab at work and have a few
issues/questions if anyone can help.
The project is to route 5 toll-free numbers to a call center. There are 5
application
hi, Anybody have ideas on book or site that reveal good information on how
to install, configure and use Cisco Work 2000, thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58959&t=58959
--
FAQ, list archives, and subscription
HI... Dear Friends,
I want to implement IDS on my PIX outside interface which facing internet.
So that I can get alarm for external attack. Below is my interface config
and global ip audit name config
nameif ethernet0 outside security0
nameif ethernet1 inside security100
ip audit name outside-
Hi,
In fact, the packet classification/marking was made in CPE side. The voice
paket will have IP precedence 5 while normal packet will have default value
(precedence 0).
The network setup is a trial to test the impact of WRED. As I read through
cisco documentation about IP-to-ATM CoS, it covers
I recommend Unix System Admin 3rd Edition.
This is one of the best Unix I've seen, it covers both a theorically
approach and the practical. I like it much better than the O'Reilly
Unix book. It's a little expensive but worth every penny.
It covers almost every topic you can think of and does s
Well if you had set any write snmp community strings you could try an
upload a config into the router that would allow you to get in via the
vty.
John
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, December 10, 2002 10:58 AM
To: [EMAIL PROTECTED]
Su
Hi All,
Anyone have experience/idea to deploy QoS on FR switch (Cisco router
configured as FR switch)? I have 2 DLCI configured on serial interface and
want to have ONE DLCI,eg, DLCI 200 have higher priority when the link
congested. Attached the configuration summary for reference.
interface Seri
What's some really good study material for anyone that has taken and
passed this exam. To get a feel for the exam I took it and scored a 533 (727
required). Not too bad for a person that's never even looked at any study
material. I'm an MCSE 2000 with Exchange 2000 which really helped.
Thanks!
Bruce,
Your right because this past weekend I took the exam without ever
looking at any study material and scored a 533. I'm an MSCE 2000 with
Exchange 2000 elective. I'm assuming you've passed the exam, what's
some good study material to use.
Thanks!
Message Posted at:
http://www.groupstudy.
Hi,
I am in the same situation - except that I did BSCN and BCRAN, and I am
considering the remaining two.
I would suggest that you just continue without delay - keep the momentum, so
to speak.
Which one first? BSCI is a lot more difficult than BCRAN. I would suggest
you do BSCI first, as it wil
94 matches
Mail list logo