ng Enterprise Edition Software
>Cluster command switch capable
>Cluster member switch capable
>24 FastEthernet/IEEE 802.3 interface(s)
>32K bytes of flash-simulated non-volatile configuration memory. Model
>revision number: A0 Model number: WS-C2924-XL-EN Configuration register
>
t every lab configuration I've set
up at home.
Cisco 7000 (6 Ethernet, 4 Token Ring, 2 FDDI, 1 ATM OC3 Multimode ST, 8
Serial - great frame switch), SSP 2 MB, 64 MB RAM, 16 MB Flash, 16 MB
PCMCIA, 1 Power Supply
The auction title on Ebay is: CISCO 7000 LOADED
Item # 2049209907
Paul,
November 1st it started to happen.
Thanks for looking into this.
Brandon
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Paul Borghese
Sent: Tuesday, November 13, 2001 1:52 AM
To: [EMAIL PROTECTED]
Subject: Re: Duplicate Emails?? [7:25902]
Ok
here... Ideas?
On Mon, 12 Nov 2001, Brandon Peyton wrote:
> Hi,
>
> Just wondering if anyone else has this problem, I have been receiving
> duplicate emails from this alias starting with "TCP Window size [7:24875]"
> sent on Thu 11/1/2001.
>
> Any idea's?
>
Hi,
Just wondering if anyone else has this problem, I have been receiving
duplicate emails from this alias starting with "TCP Window size [7:24875]"
sent on Thu 11/1/2001.
Any idea's?
Brandon
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&
|___ 1002
I would like to close certain ports on the cisco for outgoing traffic, and
make anyone portscanning me see nothing open.
I've spend a huge amount of time on CCO but still havent found what I want.
Any suggestions?
Thanks
Brandon
I currently have applied this config:
ip
they give away free classes
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9115&t=9115
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EM
sorry,
ascolta.com/ping
""Brandon Carroll"" wrote in message
news:[EMAIL PROTECTED]...
> Let me know what you think
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9116&t=9111
--
FAQ, list
:)
Could someone enlighten me on the best way to have my router dial out and
establish a ppp connection via authentication as well.
I have been unable to find sufficent information on the TAC pages of CISCO
hopefully someone can help.
Thanks
Brandon
username X password 0 X
!
interface A
serial from 1 router to a fr switch(other router), then serial from that
router to another.
O[]--O
r1 r2 r3
follow this link for configuration guidelines:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/wan_
c/wcdfrely.htm#29279
Good Luck!
""Jesus
I have a Cat 6000. The network load display on the supervisor (engine)
module
never registers any usage. How do I turn this on?
Thanks,
Brandon
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4346&t=4346
--
FAQ, list
Does anyone have any ideas?
Strange problem...
Here is the setup
I have a PIX firewall directly connect to a token-ring ethernet segment. All
users on this segment can reach the internet.(I am using NAT..(nat 1 0 0)
I also have a fast ethernet segment connected to the token ring segment
EMAIL PROTECTED]
> Homepage: http://jason.artoo.net/
>
>
>
> ""Brandon"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Jason,
> >
> > Doesn't the statement "nat 1 0 0" take care of all internal networks?
0
> nat (inside) 1 192.168.2.0 255.255.255.0 0 0
>
>
> --
> Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
> List email: [EMAIL PROTECTED]
> Homepage: http://jason.artoo.net/
>
>
>
> ""Brandon"" wrote in message
> [EMAIL PROTECTED]&q
municate ethernet domain properly?
>
> HTH
> Vincent
>
> ""Brandon"" Strange problem...
> > Here is the setup
> > I have a PIX firewall directly connect to a token-ring ethernet segment.
> All
> > users on this segment can reach the in
Strange problem...
Here is the setup
I have a PIX firewall directly connect to a token-ring ethernet segment. All
users on this segment can reach the internet.(I am using NAT..(nat 1 0 0)
I also have a fast ethernet segment connected to the token ring segment by a
router.(NT server) I can
I have kind of a different sort of question:
I need to find out when the next major Cisco IOS Release (after 12.1) will
come out. Is there a way of knowing this type of information ahead of time?
Thanks a lot for any help.
-AJ
_
Get
Travis please stop posting here!!!
Brandon L. Bartels
Sprint PCS
Information Technology
Service Delivery
Network Engineering
Phone: 913-307-3688
Email: bbarte [EMAIL PROTECTED]
-Original Message-
From: Bolton, Travis [ mailto:[EMAIL PROTECTED]
]
Sent: Thursday
http://www.cnn.com@sci-tech@3520040376/new_010325/alert/breakingnews.html
Pre-April Fools?
Brandon
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>Which datalink protocols retransmit errored frames without the
>knowledge of the host? Are there some that do it by default? Are there
>some that don't do this by default but can be configured to do so?
>
> >>> "Brandon Ripper" <[EMAIL PROTECTED]> 3/26/01
ome very useful
>information contained therein.
>
>HTH,
>John
>
> >>> "Brandon Ripper" <[EMAIL PROTECTED]> 3/26/01 11:25:10 AM
> >>>
>Hello,
>
> Well, it depends what type of transmission problem occurs. If
>a
>CRC failure occ
-transmit.
Brandon Ripper -ccna
At 10:37 AM 3/26/01 -0700, you wrote:
>Hi All,
>
>I know I should know this, but frankly I can not remember the details to
>save my life...
>
>Let's say we have two routers connected over a serial link, they are doing
>routing, not bridging.
ur own knowledge, ability, and
experience.
My $.02, but I can only read these "discussions" so often before I have to
say something...
Brandon
> -Original Message-
> From: Christopher Kolp [mailto:[EMAIL PROTECTED]]
> Sent: Monday, March 19, 2001 3:07 PM
> To: [EMAIL
Hi,
You could use extended access lists... or better yet use prefix lists.
Regards,
bp
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 08, 2001 10:18 PM
To: Cisco Group Study
Subject: How to delete a specific entry in access list ?
Hi,
How
You should be able to run BGP with your 2611, just wont be able to
accept full routes.
If you upgrade to 128 you could, you might be able to handle partial
routes if you have 64.
Brandon
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Jacek Malinowski
with my fellow techie geek fiancee afterwards and calling the CCDA just
"CCNA + reading comprehension".
Long story short if you're a CCNP, have prepared for CID, and work in the
field it shouldn't be much of a problem at all.
That's my rant for the day,
Brandon - CCNP+YPK
c to exit on Router
A from Router B it would get to HostA, BUT that same access list would not
permit HostB on a different subnet to Talk to Host A. That would require
RouterA to know about Host B's subnet and allow routing from it. The same
holds true crossing the link in the opposite di
ddress be set so that it could expire the lease right
away and re-issue one ( so I just hardcoded the ethernet address). Then the
stupid authentication was screwy. In the end everything turned out fine,
but I wonder if Cisco products work with these "proprietary"
implementations of PPPoE.
Hi,
Can someone tell me what exactly ITU-T G.707 is and how it plays a role
in stacked DS3/E3 cards?
and which cards in cisco/juniper would support ITU-T G.707
Thanks in advance,
Brandon
_
FAQ, list archives, and subscription info: http://www.groupstudy.com
ywhere and keep
as reference anywhere instead of paying $60 to have to lug a 20 lb book
around!
Call me crazy, but using a CD-R as opposed to renting a U-haul to transport
my library from home to the office is a bit more appealing.
Just some thoughts,
Brandon
> -Original Message-
>
ot;Integrating Voice and Data Networks" at home which I
haven't found time to read yet but it did look very good based on the look
through I gave it.
Brandon
> -Original Message-
> From: netlinesys [mailto:[EMAIL PROTECTED]]
> Sent: Monday, January 29, 2001 4:05 PM
an (but do they mean anything? that's a whole other topic
right there).
My $.02,
Brandon - holder of various acronyms
> -Original Message-
> From: Kevin Wigle [mailto:[EMAIL PROTECTED]]
> Sent: Friday, January 26, 2001 9:41 AM
> To: Ole Drews Jensen; 'Andy'
w Amazon has an extremely accurate profiling database; it's uncanny how
dead on their recommendations become after you spend a lot of money with
them over the course of a few years. Think they teamed up with the FBI's
Carnivore system and read my e-mail too? heh
Brandon
> -Origi
Hi,
I was wondering if anyone had any suggestions for a firewall
that could be downloaded that was manageable for W2K AS?
Preferably free if possible as this is for home use.
Thanks,
Brandon
_
FAQ, list archives, and subscription info: http://www.groupstudy.com
boot NT and 98 please show me a copy of your
boot.ini
file?
it would be in your c: dir. I've looked in tons of how to's but none offer
2 disk
assistance only partition.
Thanks for your help
Brandon
_
FAQ, list archives, and subscription info: http://w
erver runs multiple web hosting services/mail/etc. The Cisco's i
want to
help out a few mates with their cert's and want them to be able to telnet to
them.
Thanks,
Brandon
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/ci
4628] 176 msec 116 msec 136
msec
5 202.42.42.234 [AS 4628] 204 msec 116 msec 120 msec
6 * * *
Would anyone like to explain why (still in uunet network) this happens?
Without doing much research(cuz im at home)...
Thanks,
Brandon
-Original Message-
From: [EMAIL PROTECTED] [m
IS-IS is very stable and not so picky... ospf isnt the easiest to set up and
isnt, in my opinion as stable.
ospf on the other hand has more options...
so its up to you :)
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
McCallum, Robert
Sent: Tuesday, No
It depends on if your going to use it as a peer with an ISP. I wouldnt
recommend a 1720, but if its stand alone with only static routes to it, you
can live with a 26xx. If you plan on running BGP with full routes or even
partial routes, your router will die.
Regards,
-Original Message
Could someone help?
Much appreciated
Brandon
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
meone help?
Much appreciated
Brandon
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
It is my understanding that IXP RIP will route based
on tics. If there are two routes with equal tics,
then it looks at the number of Hops.
tics is a time measure: ~1/18 sec and the max hop
count is 15. This is all on page 337 of the ICND
book.
Good Luck,
Brandon
--- Dennis Laganiere
frame-relay map bridge 34 broadcast IETF
frame-relay map bridge 33 broadcast IETF
bridge-group 64
I hope this helps. I usually forget the bridge 64
route ip, statement.
Let me know if this helps.
Brandon
--- "Hartnell, George" <[EMAIL PROTECTED]>
wrote:
> I'm having some d
Guys,
Does cisco take note and record on your results from these tests?
Thanks
Brandon
-Original Message-
From: Vincent <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Tuesday, September 26, 2000 6:19 AM
Subject: Just CCO
Anybody know where I can get Routers for my Viseo
Drawings?
Thanks
Brandon
__
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/
**NOTE: New CCNA/CCDA List has been formed. For more informa
effect the bandwidth wouldn't
it?
Anyhow,just a thought.
Brandon
--- "A.Strobel" <[EMAIL PROTECTED]> wrote:
> Hi,
> I have a discussion here with my boss regarding the
> effect of CIR on the
> routing metric.
>
> He says CIR has nothing to do with the rou
Any guidance would be appreciated.
Thanks,
Brandon
__
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/
**NOTE: New CCNA/CCDA List has been formed. For more information go to
How do I clear a port that is in use? Is there a way?
Please let me know.
Thanks
Brandon
__
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/
**NOTE: New CCNA/CCDA List has been formed. For
Can anyone tell me how commands are negated on
catalyst switches? I had modified the snmp settings for testing and would
like to disable it now. On routers you can use the "no " but on
switches (5505) that doesn't seem to be available.
Thanks in advance for any
Hi all, I have a request to any really helpful souls out there :)
I have access to a Catalyst 5000 (5006) switch for practice and would like
to use CiscoView with it. I have some access to CCO but not enough to
download such software.
Is there any way I can get CiscoView 4.2 to use with this
) versions
allow you to edit lines of an exteneded access-list.
Brandon
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
McCallum, Robert
Sent: Tuesday, August 08, 2000 1:13 AM
To: 'David Jones'; 'STRAND Scott'; [EMAIL PROTECTED]
Subject
list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
begin: vcard
fn: Brandon Carroll
n: Carroll;Brandon
org:Verizon Communicati
Hi all!
Just wondering about HSRP: "Hot Standby Router Protocol" and "Host Standby
Router Protocol"...does anyone know if these are the same thing?
I have searched the Cisco site and I see a couple of references to "Host
Standby Router Protocol" but many, many references to the other one.
Th
Is there a site that breaks down all the areas like, stubby, not so stubby,
totally stubby and totally not so stubby? I went over it in BSCN and seem
to be having a hard time reviewing it.
Thanks.
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/
I just set mine up. I hope it's okay to join the network. My Id is CCNP2BE
Brandon Carroll
CCNA, Specialist-ADSL
Verison Communications, formerly GTE
"Marc Giroux (EMC)" <[EMAIL PROTECTED]> wrote:
Up to know I am only aware of 3jimk_ccnpcisco_busterMarc_girouxMarc
Thanks!
- Original Message -
From: "Mark Vicuna" <[EMAIL PROTECTED]>
To: "Brandon Carroll" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, July 13, 2000 10:49 AM
Subject: Re: EIGRP Help 2nd request
> Brandon,
>
> H on
(ms) (ms)
0 160.89.81.28Ethernet1 13 0:00:41 0 11 4
20
2 160.89.80.28Ethernet0 14 0:02:01 0 10 12
24
1 160.89.80.31Ethernet0 12 0:02:02 0 45
20
Can anyone PLEASE explain what they mean! TH/ANKS!
0:02:02 0 45
20
Can anyone PLEASE explain what they mean! TH/ANKS!
Brandon Carroll
[EMAIL PROTECTED]
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misc
t
use the router anymore :(when i console in and use 9600 8-N-1 and press
the return key i get CCC with each key press... what now?What do you
think?Brandon
Hello,
I am in the BSCN class right now and touched on the term "Varience"
Could someone pleas explain this to me. I don't feel it was covered very
well and I am actually feeling a bit lost on this.
Thanks,
___
UPDATED Posting Guidelines: http://www.groupstu
hedule out to meet and
start our study group. If you need directions you can email me or
if I've emailed you you can call my mobile.
Lets make this happen guys.
Look forward to meeting you all.
Cheers,
Brandon
___
UPDATED Posting Guidelines: http://www.grou
Where can I find a downloadable program that has the icons for routers and
switches for doing a network design?
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report mi
h you guys next week.
Cheers,
Brandon
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi guys,
I was wondering if someone could help me set up a lab for CCNP and
hopefully CCIE soon...
I have my CCNA and am working towards CCNP... But i dont know the best
lab equipment
and where to get these items once I have a set up... of course money is
always an issue.
I've looked in the arch
your location,
and the DSLAM in the Central Office
Brandon Carroll
Specialist-EPG
CCNA
""Joe Martin"" <[EMAIL PROTECTED]> wrote in message
8i1icc$mru$[EMAIL PROTECTED]">news:8i1icc$mru$[EMAIL PROTECTED]...
> At GTE, we offer Business DSL which allows a connec
After 4 weeks of ICRC, 1 week of ICND, and a no sleep for the last 3 days I
passed with a 869. Thanks to everyone that helped!
Brandon Carroll-CCNA
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription
Once again sorry for the time delay.
Please email me if anyone else would like to join the study group.
we range from ccna - ccie hopefuls.
Thanks!!
Brandon
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscri
hose books. But what tests would you
take first and what books for each test.
Thanks!!
Brandon
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Non
he console cable
is working fine ( works with other routers )
Any ideas as to what i can do with this ?
Is it fixable? or trash now?
Thanks
Brandon
---
Brandon Peyton UUNET MCIWorldcom
Corporate Netwo
In addition the activity lights are functioning
and when plugged in to the LAN the activity flashes
the exact same as the other routers on the LAN
thanks in advance,
Brandon
---
Brandon Peyton UUNET MCIWorldcom
Someone from work said that they would prefer to use
PPP over a DS3 instead of Frame
I dont understand why...
Is this illogical or reasonable?
Thanks
Brandon
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and
You want to specify the VLAN membership on the Port your network is on. The
only IP address that a 1900 has is for Managementso you can telnet to
it. The router or PC that is connected to the port you assign membership to
will have an ip address though. The ICND course goes through this. A
You should make shure that your encapsulation is the same as the telco that
you are leasing the line from. Cisco defaults to HDLC and that doesn't work
for GTE circuits. For GTE it's Encapsulation frame-relay ietf, and lmi type
is ansi.
"Jorge Rodriguez" <[EMAIL PROTECTED]> wrote in message
3
http://dsltools.bizland.com
3 router and a1switch virtual lab
""men u"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Can anyone recommend a good virtul lab site, or what equipment I will
need
> for a home CCNP lab.
>
HERE YE HERE YE!!!
unix forever :)
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Sam Adams
Sent: Saturday, May 20, 2000 3:32 PM
To: [EMAIL PROTECTED]
Subject: RE: CCNA worthless?
Oh, I am sure a company would pay you more or hire you faster if you CC
place that would have the best deals
(not an auction site) for used cisco equipment that would determine
what i can get as well...
Thanks,
Brandon
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http
Hi guys,
I know this is off subject but im at dire straights with this machine.
but i've looked in heaps of HOW-TO's and havnt found what i need.
If you have had any experience with BSD and configureing it as a
router/gateway
etc PLEASE email me...
thanks guys
B.
__
But generally Cable providers will not (unless your on a business contract)
route your IP blocks
problem i've had :(
Cheers,
B
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
rob wieters
Sent: Wednesday, May 17, 2000 1:56 PM
To: [EMAIL PROTECTED]
Sub
could you please relay any replies about this to the group...
Just so everyone ( me ) can be included?
Thanks
B.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Jim Koniecki
Sent: Monday, May 15, 2000 10:31 PM
To: [EMAIL PROTECTED]
Subject: CCNP- CCIE L
Just a quick question.
I was wondering if anyone was interested in a study group in Sydney
Australia.
I just got transfered here a month ago, and I was looking to get back into
studying a bit more.
If you are in Sydney please contact me.
Cheers,
Brandon
Hey guys,
No longer called MCI Worldcom
Its now just UUNET/Worldcom...
FYI
and no UUNET will not peer anymore.
yes all AOL's traffic is on UUNET's backbone
*shrug*
just in case you wanted to know :)
Brandon Peyton
Senior Network Engineer
Asia Pacific
UUNET
UUNET House
81 matches
Mail list logo