__
Do You Yahoo!?
Thousands of Stores. Millions of Products. All in one Place.
http://shopping.yahoo.com/
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
U might need more Flash size
-Original Message-
From: ""[EMAIL PROTECTED] [mailto:""[EMAIL PROTECTED]]
Sent: Monday, March 11, 2002 11:15 AM
To:
Subject: Pix 520 [7:37836]
I currently am trying to upgrade a pix 520 from pix ios 4.7(7) to 6.2
and am having some difficulty or errors mo
6.0 and Higher
PIX software releases 6.0 and later and PIX Device Manager require a
minimum of 32MB RAM and 8MB Flash. Some PIX 520 systems may not meet
these minimum requirements, and the purchase and installation of a 128MB
RAM upgrade and/or a 16MB flash card will be necessary.
-Origi
Hi Group,
Any one has idea how to figure out or how to connect to specific service
via an outside ip address that is being pat on a router
Best Regards
Have A Good Day!!
++
Farhan Ahmed
MCSE+I, MCP Win2k, CCA, CCDA, CCNA, CSE , CCNP
Network Engineer
1st one
-Original Message-
From: Wilson, Christian [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 09, 2001 5:43 PM
To: [EMAIL PROTECTED]
Subject: IP helper addresses [7:11434]
If I enter two ip helper address statements referencing two different IP
addresses in my router configs, which o
u can put a access list if u want?
-Original Message-
From: McCallum, Robert [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 11, 2001 1:48 PM
To: [EMAIL PROTECTED]
Subject: RE: Routing polices [7:11896]
What do you want us to do for you? Firstly go onto the CCO and read about
route-ma
do u want the spokes to come inside and access or what i didnt understand
sorry
-Original Message-
From: Tony Medeiros [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 11, 2001 12:33 PM
To: [EMAIL PROTECTED]
Subject: Re: Pix not routing for Frame Spokes [7:11860]
PIX's ( and most firewa
wrong dialer load threshold is for bringing up the second link
u can put maximum numb on idle time out or use fast idle command
-Original Message-
From: Vette Boy [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 15, 2001 8:18 PM
To: [EMAIL PROTECTED]
Subject: Re: dialer idle-timeout [7:12256
lets say i have 64k connection on both ends
if i built up a vpn what will be the speed of the tunnel
any thoughts?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12419&t=12419
--
FAQ, list archives, and subscription info: http:
service timestamps debug uptime
service timestamps log uptime
service password-encryption
no service tcp-small-servers
no service udp-small-servers
!
hostname Cisco801
!
enable password a
!
no ip name-server
!
isdn switch-type basic-net3
!
ip subnet-zero
no ip domain-lookup
ip routing
!
interface
send me the exact error
debug
-Original Message-
From: Vyacheslav Luschinsky [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 16, 2001 3:06 PM
To: [EMAIL PROTECTED]
Subject: IPSec problem [7:12463]
I have a very strange problem with IPSec, namely with ISAKMP. When it is
time for next key e
i would say if u wana overcome this problem in short time
make the tunnel again
-Original Message-
From: Luschinsky Slava [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 16, 2001 3:54 PM
To: Farhan Ahmed
Subject: RE: IPSec problem [7:12463]
I try to establish tunnel between two routers
renegotiated
i would say if u wana overcome this problem in short time
make the tunnel again
-Original Message-
From: Luschinsky Slava [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 16, 2001 3:54 PM
To: Farhan Ahmed
Subject: RE: IPSec problem [7:12463]
I try to establish tunnel between two
this is too ugly
i just try
http://192.168.5.1/level/29/exec/
on my 2503
and i m in
ha
-Original Message-
From: Oke Oyebanji [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 16, 2001 4:38 PM
To: [EMAIL PROTECTED]
Subject: Alert: HTTP bug makes nearly all Cisco routers vulnerable
[7:12471]
are u getting the answer of access server or no
is it stays on verifying password or ur router doesnt dial at all
check your modem chat script at 56k.com
send me
debug ppp negotiation
-Original Message-
From: No Data [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 16, 2001 8:33 PM
To: [E
F1S0=1 while 56k.com says AT&F1 should be
fine. Maybe that narrows down the problem Im having.
Ben
--- Farhan Ahmed wrote:
> are u getting the answer of access server or no
> is it stays on verifying password or ur router
> doesnt dial at all
> check your modem chat script
i it working or not
what u want to allow disallow forget this1
-Original Message-
From: Robert Fowler [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 16, 2001 11:05 PM
To: [EMAIL PROTECTED]
Subject: Access List problem. [7:12525]
Someone sent me this and I just can't figure it out. I've b
get a iis server redirect to some server which ll be down and customize the
error page
-Original Message-
From: Nabil Fares [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 1:19 AM
To: [EMAIL PROTECTED]
Subject: DNS and Firewalls [7:12547]
Greetings all,
Looking for methods to i
outbound 10 deny 0 0 icqport tcp
apply (inside) 10 outgoing_src
-Original Message-
From: Makis
To: [EMAIL PROTECTED]
Sent: 7/17/01 12:13 PM
Subject: Block Icq With Pix Firewall [7:12601]
Hi
How can i block Icq through Pix Firewall ?
Any ideas ?
Makis
Message Posted at:
http://w
when u configure the dynamic nat
users will start connecting
i dont know what u done with the config
send me the config
to block some port
u need
for static mapping
static (inside,outside) 204.31.17.4 192.168.3.4 netmask 255.255.255.255
conduit permit tcp host 10.1.1.1 eq smtp any
outbound
sorry the correct
u need
for static mapping
static (inside,outside) 204.31.17.4 192.168.3.4 netmask 255.255.255.255
conduit permit tcp host 192.168.3.4 eq smtp any
-Original Message-
From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 1:46 PM
To: [EMAIL PROTECTED
u r too much wrong
hostname Cisco2620
!
enable password f
!
no ip name-server
!
isdn switch-type basic-net3
!
ip subnet-zero
no ip domain-lookup
ip routing
!
interface Dialer 1
description connected to Internet
ip address negotiated
ip nat outside
no ip split-horizon
encapsulation ppp
dial
do u wana connect ciso to pix via vpn?
-Original Message-
From: RAJESH AGNIHOTRI [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 3:08 PM
To: [EMAIL PROTECTED]
Subject: sample config on PIX AND VPN ON CISCO [7:12618]
Greetings ,
Can u please send me the sample config on PIX FIR
Cause i = 0x82A2 No circuit/channel available The connection cannot be
established because no appropriate channel is available to take the call.
u dont have a free channel
how many bri u have?
-Original Message-
From: Charlie Hartwell [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17
NV Ram or TFTP server
-Original Message-
From: Radford Dion [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 4:54 PM
To: [EMAIL PROTECTED]
Subject: VTP config on 3548 [7:12629]
Im trying to configure VTP on a 3548 switch, but when its asking me to
provide a file of vtp configurat
first of all in basic net3 u dont need spids
and the second u dont have a ip assigned to your bri neither you are using
esy ip there is no dialer as well
what happen to u guys
-Original Message-
From: Danner, John (ZoomTown) [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 6:
get a cross over cable from ebay.com
-Original Message-
From: Chris Headings [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 8:05 PM
To: [EMAIL PROTECTED]
Subject: WIC to WIC Connection [7:12668]
Hello allsetting up a small lab w/2 2621's. Would like to create a
"WAN" cable
Message-
From: Magdy H. Ibrahim [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 7:23 PM
To: "Farhan Ahmed"
Subject: Re: PIX 506 hang up [1:5132]
Assalamo Alikom Farhan,
Thanx in advance to your help..
Kindly find attached file which contained the output of sh tech ...
Aw
no
-Original Message-
From: SH Wesson [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 8:47 PM
To: [EMAIL PROTECTED]
Subject: DLCI [7:12679]
Can we have two DLCI having the same number on the same router but point to
different destinations on different interfaces?
_
[mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 9:27 PM
To: 'Farhan Ahmed'; '[EMAIL PROTECTED]'
Subject: RE: Error in configuring ISDN [7:12611]
The Switch type as defined under the interface is Basic-ni. According to
http://www.cisco.com/warp/public/129/bri_invalid_spid.h
communicating on the same connection.
-Original Message-
From: NP-BASS LEON [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 9:32 PM
To: 'Farhan Ahmed'; [EMAIL PROTECTED]
Subject: RE: DLCI [7:12679]
OKAY, I THINK WE NEED TO GET THIS STRAIGHT, I HAVE A YES AND A NO
WRITT
interface. It is using legacy
configuration.
-Ejay
-Original Message-----
From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 11:26 AM
To: [EMAIL PROTECTED]
Subject: RE: Error in configuring ISDN [7:12611]
first of all in basic net3 u dont need spids
and the second u d
of
> the routers) be the best solution.
>
> > -Mensagem original-
> > De: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
> > Enviada em: terga-feira, 17 de julho de 2001 13:23
> > Para: [EMAIL PROTECTED]
> > Assunto: RE: WIC to WIC Connection [7:12668]
> >
> >
just put
access-list acl_in deny tcp any any
access-list acl_in deny udp any any
access-list acl_in permit tcp 172.100.0.1 255.255.0.0 any eq www
access-list acl_in permit tcp 172.100.0.1 255.255.0.0 any eq smtp
access-list acl_in permit tcp 172.100.0.1 255.255.0.0 any eq ftp
access-group acl_in
Changing IP Information
You can assign and change the IP information of your switch in the following
ways:
Using the setup program, as described in the release notes
Manually assigning an IP address, as described in this section
Using Dynamic Host Configuration Protocol (DHCP)-based autoconf
How to Change Terminal Server's Listening Port
The information in this article applies to:
Microsoft Windows NT Server version 4.0, Terminal Server Edition
Microsoft Windows 2000 Advanced Server
Microsoft Window
set a static route
ip route 0.0.0.0 0.0.0.0 serial0
ip route 0.0.0.0 0.0.0.0 serial0
r u using unnumbered?
send me sh int s0
-Original Message-
From: Andrew Larkins [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 18, 2001 2:06 PM
To: [EMAIL PROTECTED]
Subject: WAN link funnies - UP UP
Caveats
Caveats describe unexpected behavior in Cisco IOS software releases.
Severity 1 caveats are the most serious caveats; severity 2 caveats are less
serious. Severity 3 caveats are moderate caveats, and only select severity 3
caveats are included in the caveats document.
For information on c
p DSR=up DTR=up RTS=up CTS=up
-----Original Message-
From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
Sent: 18 July 2001 13:24
To: 'Andrew Larkins'
Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
[7:1 2780]
send me the sh int
-Original Message-
From:
, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
-Original Message-
From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
Sent: 18 July 2001 13:24
carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
-Original Message-
From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
Sent: 18 July 2001 13:24
To: 'Andrew Larkins'
Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
[7:1 2780]
send me the sh int
-
why dont u remove all your config and try from the beginning
or send ur complete config
or send the debugs atleast
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 18, 2001 4:51 PM
To: [EMAIL PROTECTED]
Subject: RE: WAN link funnies - UP
priority: size/max/drops):
> > high: 0/20/0, medium: 0/40/0, normal: 0/60/0, low: 0/80/0
> > 5 minute input rate 0 bits/sec, 0 packets/sec
> > 5 minute output rate 0 bits/sec, 0 packets/sec
> > 1 packets input, 56 bytes, 0 no buffer
> > Received 0 bro
Spid Status
TEI 109, ces = 1, state = 8(established)
Terminal Endpoint Identifier (TEI) number and state. Valid dynamic TEI
assignment range is 64-126.
The most common state values are:
state = 1(terminal down)
state = 3(await establishment)
state = 5(init)
state = 6(not initialized)
state
what u cannot dial u are already connected?
can u send the config
-Original Message-
From: SH Wesson [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 18, 2001 5:18 PM
To: [EMAIL PROTECTED]
Subject: BRI state [7:12802]
I have a question regarding BRI state. The following is a capture of
i checked the last 2 candidates
CCIE Verification Tool
No, I'm sorry, Dave Mack is not CCIE number 6963. To receive a positive
verification, you will need to enter in the CCIE's name exactly as it is in
the CCIE database. For example, if the CCIE's first name is Dan, you may
also want to try Dani
Static Routes
ip route 0.0.0.0 0.0.0.0 Dialer
-Original Message-
From: Technosys [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 18, 2001 6:02 PM
To: Farhan Ahmed
Subject: Re: Error in configuring ISDN [7:12611]
Hi Farhan ,
Enclosed please find the details of the current config
aring how this ACL works.
Thank you,
MikeN
""Farhan Ahmed"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> just put
>
> access-list acl_in deny tcp any any
> access-list acl_in deny udp any any
> access-list acl_in permit tcp 172.1
any thoughts welcome
we have a lan including proxy server and database server
there are two depts in the lan , one public and one private, ther is no vlan
and not supported on switch
the public department connect to the internet via proxy server which has a
acounting software connection to the da
any thoughts welcome
we have a lan including proxy server and database server
there are two depts in the lan , one public and one private, ther is no vlan
and not supported on switch
the public department connect to the internet via proxy server which has a
acounting software connection to the da
sorry but i couldnt understand
do u want from the notebook to ping hosts
if this is the case
ther is a command
router(config)#async-bootp dns-server
to pass the dns server to dial up clients
Best Regards
Have A Good Day!!
Farhan Ahmed
MCSE+I, MCP Win2k, CCDA, CCNA, CSE
Network
fully
qualified. I thought that the domain-list command would enter the DNS
suffix into the adapter,but it's not. We are taking care of this now by
just manually entering the DNS suffix in the connection properties.
I tried the async commands but nothing has changed.
JR
Farhan Ahmed
yes u just need a
async-bootp dns-server
command folowed by yr dns srv ip
and u are done
and remove the dns suffix from client as welll
Best Regards
Have A Good Day!!
Farhan Ahmed
MCSE+I, MCP Win2k, CCDA, CCNA, CSE
Network Engineer
Mideast Data Systems Abudhabi Uae
can u send sh int output
uncleared and after clearing counters...
-Original Message-
From: Eric Mwambaji [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 19, 2001 9:51 PM
To: [EMAIL PROTECTED]
Subject: Latency on ATM interface - Any ideas [7:12978]
I experience intermittent increased lat
send me in using different MTU sizes in extended pings
-Original Message-
From: Eric Mwambaji [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 19, 2001 9:51 PM
To: [EMAIL PROTECTED]
Subject: Latency on ATM interface - Any ideas [7:12978]
I experience intermittent increased latency on
exte
ping hosta
he ll get a reply
from
hosta.zonea.co.ae
what do u say?
-Original Message-
From: Hire, Ejay [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 19, 2001 10:43 PM
To: 'Farhan Ahmed'; [EMAIL PROTECTED]
Subject: RE: Remote Access [7:12958]
The Async BootP commands only
sible solution appears to be proxying the ip requests to a dhcp server,
or router acting as a dhcp server. I'll be testing it in a minute or two.
-eh
-Original Message-----
From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 19, 2001 2:04 PM
To: [EMAIL PROTECTED]
Subject:
er,
> or router acting as a dhcp server. I'll be testing it in a minute or two.
>
> -eh
> -Original Message-
> From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, July 19, 2001 2:04 PM
> To: [EMAIL PROTECTED]
> Subject: RE: Remote Access [7:12958]
>
&
u need to cont ur telco they are dropping ur traffic
is there too much load on line?
-Original Message-
From: Eric Mwambaji [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 19, 2001 11:23 PM
To: Farhan Ahmed
Subject: RE: Latency on ATM interface - Any ideas [7:12978]
ping
Protocol [ip
write any file name .bin
-Original Message-
From: Ray Smith [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 20, 2001 4:54 AM
To: [EMAIL PROTECTED]
Subject: HELP with BOOTUP [7:13031]
I have a cisco 2503 router that is in the mode of Router(boot)>. I have
tried doing a "copy tftp fl
use redistribute command..
-Original Message-
From: pat [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 20, 2001 6:51 AM
To: [EMAIL PROTECTED]
Subject: routing issue with ISDN backup [7:13045]
Hello everyone:
I have some routing issue here.
I have central office with a core r
remove all the wics and then boot
put the wic first in 0 then 1
which wics u have
-Original Message-
From: chris klebl [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 20, 2001 7:10 AM
To: [EMAIL PROTECTED]
Subject: Q about configuring new WIC's [7:13051]
i have recently gotten 3 2610'
-Original Message-
From: sakella locuz [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 20, 2001 11:51 AM
To: [EMAIL PROTECTED]
Subject: PIX.. [7:13067]
Can anyone update me with the advantages of PIX over Checkpoint and
Gauntlet?
-a-
Message Posted at:
http://www.groupstudy.com/form/r
-Original Message-
From: Marc Maiffret [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 20, 2001 10:48 PM
To: [EMAIL PROTECTED]
Subject: CodeRed: the next generation
The following is a description of a "variant" "Code Red" worm that we have
found to be in the wild. Sorry for the rough conte
tm
-Original Message-
From: Charles Ryan [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 21, 2001 12:04 AM
To: [EMAIL PROTECTED]
Subject: AGS+ as a frame-relay switch [7:13133]
Apologies if this has already been covered once before.
Quick question regarding setting up an AGS+ a
A speed mismatch can occur when the source and destination ISDN ports do not
belong to the same network.
try setting
The following example sets the line speed for incoming calls to 56 kbps:
command
on bri int
isdn not-end-to-end 56
or 64(def)
-Original Message-
From: [EMAIL PROTECT
AGREE
-Original Message-
From: Torren Craigie-Manson [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 21, 2001 9:37 AM
To: [EMAIL PROTECTED]
Subject: Disaster Recovery Documentation? was Re: what's wrong with CCIE
[7:13180]
""Sean Young"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL
u need to put your serial no
and u ll get a new key
u need cco login
-Original Message-
From: Jacques Allison [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 21, 2001 5:24 PM
To: [EMAIL PROTECTED]
Subject: PIX activation key on 4.1(6) [7:13187]
Hi all,
On PIX ver 4.1(7) I can use the "
just need a copy tftp flash command
-Original Message-
From: chica [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 21, 2001 9:31 PM
To: [EMAIL PROTECTED]
Subject: tftp server! [7:13203]
hi,
i'm setting up my lab and want to install the tftp
server on one PC.I would also want to upgrade
Received 1695744 bytes.
Erasing current image.
Writing 1597496 bytes of image.
!!!!!!!
Image installed.
-Original Message-
From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 21, 2001 7:57 PM
To: [EMAIL PROTECTED]
Subject: RE: PIX activation key on 4.1(6) [7:13187]
u need
Deleted means that the Frame Relay switch doesn't have this DLCI programmed
for the router. But it was programmed at some point in the past. This could
also be caused by the DLCIs being reversed on the router, or by the PVC
being deleted by the telco in the Frame Relay cloud. Configuring a DLCI
(t
ofcourse u can its a protocol
-Original Message-
From: Mr. Richard L. Pickard [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 22, 2001 5:03 PM
To: [EMAIL PROTECTED]
Subject: peer to peer IPX [7:13246]
7/22/2001 7:45am Sunday
It is possible to run IPX between WIN 95 workstations withou
cisco.com/go/tools
-Original Message-
From: Omer Ehsan Dar [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 23, 2001 10:53 AM
To: [EMAIL PROTECTED]
Subject: Cabling info needed [7:13317]
Hi all,
Where can I find good cabling info related to LAN networking and the
cisco switches in particu
does any body know why cisco restrict to use only 1 gigabit interface on pix
models?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13327&t=13327
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco
current traffic rate
-Original Message-
From: Phil Barker [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 23, 2001 1:28 PM
To: [EMAIL PROTECTED]
Subject: sh system command ? [7:13330]
Hi,
The 'show system' command on a Cat 5500 contains a
current traffic level and a peak level. How lon
u should have used 3 tacacs servers
""Sean Young"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> What's wrong with CCIEs today? I know that I am making a general
> assumptions; however,this is the second time that it has happend to the
> company that I work for. We have sev
!
interface Dialer 1
description connected to Dial-inPCs(modem)
ip unnumbered Ethernet 0
ip tcp header-compression passive
encapsulation ppp
dialer in-band
dialer-group 1
ppp authentication chap
no cdp enable
peer default ip address pool Cisco1601-Group-1
!
!
interface Serial 0
physical
send me debug frame-relay lmi output
-Original Message-
From: Jeff [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 23, 2001 5:20 PM
To: [EMAIL PROTECTED]
Subject: FrameRelay Over Utilized [7:13349]
Hello,
If I have a frame relay switch which is being over utilized will that cause
the conn
also these outputs
show interfaces serial
show controllers serial
debug serial interface
-Original Message-
From: Jeff [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 23, 2001 5:20 PM
To: [EMAIL PROTECTED]
Subject: FrameRelay Over Utilized [7:13349]
Hello,
If I have a frame relay switch
first do
backup delay 30 600
just to wait isdn 4 30 sec
use eigrp
and floating static put cost above 90
let me know
-Original Message-
From: sakella locuz [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 23, 2001 5:37 PM
To: [EMAIL PROTECTED]
Subject: Urgent... [7:13351]
Hi everybody,
I
what is the scenario
-Original Message-
From: Jim Bond [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 23, 2001 10:01 PM
To: [EMAIL PROTECTED]
Subject: OT: certificate system again [7:13401]
Hello,
I posted this message on certificate newsgroup but
didn't get any response. Since there ar
Cisco Secure ACS operates as a Windows NT or Windows 2000 service and
controls the authentication, authorization, and accounting (AAA) of users
accessing networks. Cisco Secure ACS operates with Windows NT Server version
4.0 and Windows 2000 Server. Provided that Microsoft Clustering Services are
lets say we have 2 cisco 1720 with vpn accelerator card and both have a 64k
connection to internet
> what would be the speed of the tunnel
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13499&t=13499
--
FAQ, list archives, and s
how its possible for ids to read the contents of packet for eg
"confidential doc" and generate an alaram
what if somebody using vpn from inside network to somewhere else to transfer
confidential information
what does it means that ipsec is ,,,
Message Posted at:
http://www.groupstudy
What mask would be used if you want to create an
access list where the IP addresses (128.252.0.0 to
128.252.240.0) would be blocked
pls support with explanation,
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13564&t=13564
--
FA
Last Weeks CCNA(tm) Challenge Question
Question
Using classful assumptions, what is the directed broadcast address for
172.18.2.0 with the mask 255.255.254.0?
a) 172.18.2.255
b) 172.18.3.255
c) 172.18.255.255
d) 172.18.0.0
Answer
b)
Message Posted at:
http://www.groupstudy.com/form/read.p
def mask
-Original Message-
From: MikeN [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 24, 2001 10:36 PM
To: [EMAIL PROTECTED]
Subject: Re: access list.. [7:13564]
To answer this question, we would need to know what the subnet masks are.
Thanks,
MikeN
""Farhan Ahmed&q
u need to setup static route in both direction u just put only 1 route to
the 1st vlan u need more rotes in both direc
on the other vlans u should have static routes to router via x
-Original Message-
From: Kiran Kumar M [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 24, 2001 10:28 PM
To:
cAN U SEND YR CONFIGS
-Original Message-
From: Kiran Kumar M [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 24, 2001 10:40 PM
To: Farhan Ahmed
Cc: [EMAIL PROTECTED]
Subject: RE: Problem with Fastethernet 2610 router [7:13497]
It is not at all the routing problem. Because it is
ailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 24, 2001 10:40 PM
To: Farhan Ahmed
Cc: [EMAIL PROTECTED]
Subject: RE: Problem with Fastethernet 2610 router [7:13497]
It is not at all the routing problem. Because it is perfectly working with
the same configuration with other router with out any changes.
Than
what do u mean by safe side?
-Original Message-
From: Kiran Kumar M [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 24, 2001 11:04 PM
To: Farhan Ahmed
Subject: RE: Problem with Fastethernet 2610 router [7:13497]
Nothing Actually second line is not required if we are defining the
first
nothing wrong but its illogical
same route pointing to one host none of them will work if that host is down
so there is no point of safe side.. right?
-Original Message-
From: Kiran Kumar M [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 24, 2001 11:12 PM
To: Farhan Ahmed
Subject: RE
try this
telnet 192.168.1.201 20(yourline#)
at
OK READY
02:02:56: TTY3: DSR was dropped
02:02:56: tty3: Modem: READY->HANGUP
02:02:57: TTY3: dropping DTR, hanging up
02:02:57: tty3: Modem: HANGUP->IDLE
02:03:02: TTY3: restoring DTR
It looks to me like it connects (both from the debug
and the pre
try putting flowcontrol hardware
-Original
> hostname PHX_Router
> !
> !
> username dialto password 0 password
> username dialfrom password 0 password
> ip subnet-zero
> !
> isdn voice-call-failure 0
> chat-script dialout ABORT ERROR "" "AT&F&C1&D2" OK
> "ATDT \T" TIMEOUT 60 \c
> call rsvp-sy
1's as
interesting: 128.252.x.x
You will need to grasp this concept before moving on to subnetting and
supernetting.
There are some excellent explanations for how this works in the Cisco Press
CCNA books.
To confirm, this is for routers and not the PIX ACLs.
HTH
MikeN
""Farhan Ahmed&quo
> Sent: Tuesday, July 24, 2001 1:02 PM
> To: [EMAIL PROTECTED]
> Subject: Re: access list.. [7:13564]
>
> access-list 1 deny 128.252.0.0 0.0.240.255
> access-list 1 permit any
>
> the 1st line blocks that range and the 2nd line allows all other traffic
>
>
> i think
Ayers, Michael
Sent: Tuesday, July 24, 2001 1:40 PM
To: 'Farhan Ahmed'; Ayers, Michael; [EMAIL PROTECTED]
Subject:RE: access list.. [7:13564]
0.0.15.255 =
I only care what the first 20 bits are. So 128.252 are 16 bits, we can
ignore t
PM
To: 'Farhan Ahmed'; Ayers, Michael; [EMAIL PROTECTED]
Subject:RE: access list.. [7:13564]
0.0.15.255 =
I only care what the first 20 bits are. So 128.252 are 16 bits, we can
ignore them (they match visually). The last octet is all 1, so we
:[EMAIL PROTECTED]]
Sent: Wednesday, July 25, 2001 9:22 PM
To: 'Farhan Ahmed'; [EMAIL PROTECTED]
Subject: RE: access list.. [7:13564]
Objective:
Create an Access list to block the source address range 128.252.0.0 to
128.252.240.0
Solution 1:
access-list 1 deny 128.252.0.00.0.127.
> You can check it with the subnet calculator from B0s0n Software.
>
> -ejay
>
> -Original Message-
> From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, July 25, 2001 2:23 PM
> To: 'Hire, Ejay'; [EMAIL PROTECTED]
> Subject: RE: access list.
1 - 100 of 167 matches
Mail list logo