Stu
Help. How do I drop these digests.
thx
Tom B
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Sep 27, 2020, at 5:32 PM, cnc-list-requ...@cnc-list.com wrote:
> Date: Sun, 27 Sep 2020 18:58:03 -0400
> From: "Stu"
> Subject: S
I have used Marine Traffic and it's companion
App, On Course on my iPad for years. Both
require access to the internet and rely on the
wireless devices GPS. And, they both work great.
MarineTraffic shows all of the AIS signals, tags
each with vessel information as well as course
and
Yanmar 3HM35 here. We cruise at 7.3 or so @ 2600
RPM with a clean bottom and prop. If the prop
and bottom are all crudded up,.6.5 and she overheats...
Tom B
At 09:00 AM 8/24/2020, you wrote:
Message: 4
Date: Mon, 24 Aug 2020 14:17:42 + (UTC)
From: Peter Cowenhoven
To:
Subject: Re:
Edd
You really need to glass in a shelf with
sufficient strength to withstand the torque and
pressure exerted when lifting the anchor an
chain. IMO a bolted shelf is not going to do it.
Also, keep in mind that the little arm that rests
on the chain/rode sticks up about 3/4 in. You'll
I'm pretty sure that the screwed ends are merely
car stops are anchored top the track, not the deck.
We had a similar problem with the babystay track
on Alera. We undid the mounting bolts, squeezed
in some life calk and tightened them back down. Has not leaked since ,
Tom B
At 11:31 AM
I have used Pettit 1793 on the Maxprop 3 blade folding prop on my last two haul
outs. It holds up for about a year or so here in the Pacific Northwest. I
suspect 1792 is comparable.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Aug 10, 2020, at 8:24
My starter button was giving me problems. It turned out the the button switch
was loose. The rubber cap concealed that fact. I tighten the ring on the
Loose switch and it was fine.
Sometime things are easier to fix than we expect...
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P
Quick
Geius
1999? my sweet butt. Apparently, it is now OK to
list the manufacturer build year based on your most recent upgrade. Or not...
At 09:00 AM 7/27/2020, you wrote:
Message: 5
Date: Mon, 27 Jul 2020 09:56:30 -0400
From: Joe Della Barba
To: cnc-list@cnc-list.com
Subject: Stus-List 1,000 year
I picked up a new lift play today and will
install it soon. I am considering adding an
electric pump between the tank and the lift
pump. Does anyone know the inside diameter of
that feed fuel line? I think I ought to know before I cut mine.
thx
Message: 1
Date: Wed, 22 Jul 2020
a shot at replacing it and seeing if that solves the
problem.
Anyone replace the fuel lift pump on a Yanmar 3HM35F? I am wondering if the
arm that rides the cam is above the at recast engine oil level.
thx
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
, I never see any
crud or water in my Rancor.I want to just pump out the fuel to
get a decent measurement of exactly how much fuel is in the tank.
So, I’m thinking, get a fuel polisher. Waddaya all think?
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
Edd
Sweet...is it a raw or fresh water flush set up?
Tom B
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Jul 18, 2020, at 8:58 AM, cnc-list-requ...@cnc-list.com wrote:
>
> Message: 3
> Date: Sat, 18 Jul 2020 10:31:44 -0400
> From: Edd Schi
72 here.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
I have a Zoom pro account that can host up to 100
participants that we can use if you like. The
PNW event was cancelled too. So, I would love to
see us all get together...maybe from our boats even!
Tom B
At 04:42 PM 7/14/2020, you wrote:
Please remember to trim you posts before Stu blows a gasket.
Typoed from my iPhone
Tom Buscaglia
Alera 1990 C 37+/40
Vashon Island WA
O 206.463.9200
C 305.409.3660
Skype - thombusc
___
Thanks everyone for supporting this list with your contributions
With a clean bottom, 7.5 @ ~2800 RPM. SOG varies. ;)
At 10:23 AM 6/23/2020, you wrote:
Message: 2
Date: Tue, 23 Jun 2020 12:52:33 -0400
From: Rob Hamlin
To: cnc-list@cnc-list.com
Subject: Stus-List 37+ Cruise Speed
Message-ID: <41fc3106-a627-4eee-bcab-6b8f5861b...@gmail.com>
Content-Type:
don’t race...cruise
only.
Tom B
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Jun 12, 2020, at 8:20 AM, cnc-list-requ...@cnc-list.com wrote:
>
> Message: 1
> Date: Fri, 12 Jun 2020 10:59:24 -0400
> From: Edd Schillay
> To: Edd Sch
that way.
Maybe mounting in the lazarete and attaching it to the quadrant would work for
you...
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Jun 6, 2020, at 9:00 AM, cnc-list-requ...@cnc-list.com wrote:
>
>
> -Original Message-
>
Glen
Our traveler is just forward of the binnacle. I think it was a
custom factory job. Seems solid but I have no idea if the parts
where it is anchored were reenforced or not.
https://www.flickr.com/gp/tombuscaglia/923cyW
Tom B
Tom & Lynn Buscaglia
SV Alera
C 37+/40
Vashon Island WA
rider thingie.
Tom B
Tom Buscaglia
SV Alera
1990 C 37+/40
Vashon Island WA
(206) 463-9200
www.sv-alera.com
At 11:49 AM 6/2/2020, you wrote:
Message: 6
Date: Tue, 2 Jun 2020 14:48:38 -0400
From: Edd Schillay
To: Edd Schillay via CnC-List
Subject: Stus-List Anchor Windlass - 37+
Message-ID:
Co
Ghosts or Demons
At 02:31 PM 5/31/2020, you wrote:
Message: 5
Date: Sun, 31 May 2020 16:31:06 -0500
From: Nate Flesness
To: cnc-list@cnc-list.com
Subject: Stus-List instrument panel idiot light BUZZER going on
cyclically, all switches OFF
Message-ID:
Content-Type:
Free for life...at least that’s what I heard.
https://latsatts.com/free-membership-registration/
Enjoy.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
___
Thanks everyone for supporting this list with your
Ken
Well that was not expectedveery
interesting. How about a picture of the inside
of the lazarette to the how the drive is mounted?
Tom B
.¤º°`°º¤,¸¸,¤º°`°º¤¤º°`°º¤,¸¸,¤º°`°º¤.
Tom & Lynn Buscaglia
SV Alera
C 37+/40
Vashon Island WA
(206) 463-9200
www.sv-alera.com
At 01:20 PM
If it’s for your 37+/40, forget about it. Quadrant mounting is discouraged by
Edson. And the above deck placement of the radial drive wheel makes it, if
not impossible, nearly so.
I’m in the midst of my install but it is all below in the aft lazerette.
Tom Buscaglia
S/V Alera
1990 C 37+/40
For Josh and anyone else interested...here are
much better images of my traveler install and the
teak insert where the usual install is.
https://www.flickr.com/gp/tombuscaglia/7PBEu9
https://www.flickr.com/gp/tombuscaglia/3XAe89
Tom B
¤º°`°º¤,¸¸,¤º°`°º¤¤º°`°º¤,¸¸,¤º°`°º¤.
Tom & Lynn
Josh
The channel and ports are still there. But instead of the traveler, there is a
piece of teak laid in. I see no evidence that there was ever a track there.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On May 14, 2020, at 4:41 AM, cnc-list-requ...@
Our 37+/40 has the traveler in front of the wheel
instead of blocking the entrance to the cabin at
the front of the cockpit. It is a short Lewmar
rail between the front of the seats. It is not
much of a swing, only about 30" or so wide. But, it works great for us.
This is the best
I use an Otterbox case and this Arkon mount.
https://www.arkon.com/product/TAB127-tablet-boat-helm-mount.html
I also installed a USB plug on my navpod for charging.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660___
I love our windlass. We didn’t have one on our 35 MK1 and hardly ever anchored
as a result.
Now we anchor often and it has really enhanced our cruising experience.
https://flic.kr/p/pHsMrg
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Apr 30, 2
David
If it's anything like my 37+/40 (and it probably
is) the breakers are right behind the switch
panel. Undo the knurled screws in the four
corners and lower the panel forward and down revealing a row of breakers.
Tom B
At 09:31 AM 4/22/2020, you wrote:
Message: 1
Date: Wed, 22 Apr
luck with the install and Edson is a good source for advice..
Chuck Gilchrest
S/V Half Magic
1983 35 Landfall
Padanaram, MA
>From: CnC-List
On Behalf Of Tom Buscaglia via CnC-List
>Sent: Sunday, April 19, 2020 6:19 PM
...snip...
>... greatly appreciated. If you want to
support the
stall and Edson is a good source for advice..
Chuck Gilchrest
S/V Half Magic
1983 35 Landfall
Padanaram, MA
>From: CnC-List
On Behalf Of Tom Buscaglia via CnC-List
>Sent: Sunday, April 19, 2020 6:19 PM
...snip...
>... greatly appreciated. If you want to
support the list - use PayPa
.
The adventure continues...
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Apr 19, 2020, at 4:30 PM, cnc-list-requ...@cnc-list.com wrote:
>
> Message: 8
> Date: Sun, 19 Apr 2020 16:24:46 -0700
> From: Bryan Colwell
> To: cnc-list@cnc-list
if his install
show a keyway on his post, mine does not have one.
I’ll check with Edson to see what they recommend for attaching the tiller arm.
Sigh...
Stay safe all.
Tom B
Typoed from my iPhone
Tom Buscaglia
Alera 1990 C 37+/40
Vashon Island WA
O 206.463.9200
C 305.409.3660
Skype
I stopped in a marine store On a cruise when we first got Alera and there was
one suctioned to the front window. I went in and asked if they had any
available and was told they were no longer available. The owner was nice
enough to sell me the one in the window. Lucky me!
Tom Buscaglia
S/V
I ran out of fuel 2x last season expecting 40G. At each refill, once after a
humiliating tow and another in our home harbor with a dinghy to the dock and a
Jerry can run, the tank would only take ~25G.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Mar
Does anyone know if there is a hose or extension
on the fuel pickup on the 37+/40? My 40G tank
started running out at ~25g. One of the guys
from the yard said that some pickups have a
length of hose on the lower end. If there is and
it fell of, that would explain it.
thx
Tom B
Kevin
The fellow in the slip next to ours had an issue
with the bottom plate on his steering. It was
not a C But it was way more than just the
plate. The rust reflected a weakening of the
deck where the plate attached. The fix
necessitated a complete removal of the pedestal
and rebuild
The propane locker on Alera is on the Sbd side of
the helm station just inbound of the fuel
filler. It has some sort of insert on the
bottom. I'm not sure if it's painted wood or
fiberglass. I am considering reenforcing it and
mounting my linear drive to it, upsidedown. Now
you have me
Alera has a vented loop on the hose from the head to the holding tank. It’s
behind the bulkhead behind the sink almost touching the underside of the deck.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Feb 14, 2020, at 6:22 PM, cnc-list-requ...@
Josh
Is that a factory install?
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Feb 5, 2020, at 5:51 PM, cnc-list-requ...@cnc-list.com wrote:
>
> Message: 6
> Date: Wed, 5 Feb 2020 20:08:02 -0500
> From: Josh Muckley
> To: "C Lis
Here are the ones I
have...https://www.dropbox.com/sh/idesr5i8mj0gdci/AADMW3mhg-6BFsTWqnSgJvt_a?dl=0
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
>> On Feb 5, 2020, at 5:51 PM, cnc-list-requ...@cnc-list.com wrote:
> Send CnC-List mailing list su
I got a set of installation photos from somone's
flickr or picasa web site. I think it was an
install on a 37+/40 about 2-3 years ago.
Will the guilty party please set forward!
Tom B
.¤º°`°º¤,¸¸,¤º°`°º¤¤º°`°º¤,¸¸,¤º°`°º¤.
Tom & Lynn Buscaglia
SV Alera
C 37+/40
Vashon Island WA
(206)
is well above the water line and the loop could be bypassed.
The only other possibility is the hoses on the suction side of the system
collapsing on the inside...but that still seems unlikely.
Thoughts appreciated.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C
I also used UK for both my main and new 145
Genoa. The main is tricky and difficult to get
right due to the Schaefer in boom furling set
up. I took my old main to North and they blew
it. Love the new sails and Stewart in Sidney was
great to work with.
I received by new stainless mixing elbow for my
Yanmar HM35F. It has a reverse threaded
connector between the elbow and the header that
attaches to the exhaust output from the
engine. The one I took out has some black goop
on the connecting threads which I am guessing
helps seal the
some
attention. With the elbow off it should not be too difficult to at least
clean it out.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Dec 29, 2019, at 3:27 PM, Tom Buscaglia wrote:
>
> Backwashing was a great idea. I put a cone shap
going to stainless.
Tom B
Typoed from my iPhone
Tom Buscaglia
Alera 1990 C 37+/40
Vashon Island WA
O 206.463.9200
C 305.409.3660
Skype - thombusc
> On Dec 29, 2019, at 1:32 PM, cnc-list-requ...@cnc-list.com wrote:
>
> Send CnC-List mailing list submissions to
>cnc-list@
and I’m running out of links.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list
Al
I had the same thing happen earlier i the
year. It turned out the the fuel dock had
recently installed new high volume pumps, I
assume to speed up filling larges motor yachts,
and that, not the fill tube was the issue. You
may want to check that before you start tearing out things.
I have a puzzle. I was on my way to fill up last
trip out for a nice weekend rendezvous with out
club when I ran out of fuel. Fortunately, I was
close enough to our club in the inner harbor. I
dropped the dinghy and ran to shore to get a
gerry can of diesel. When I finally got to the
gas
Tom & Lynn Buscaglia
S/V Alera
1990 C 37+/40 (Wing keel)
Sail number - none
Quartermaster Yacht Club
Vashon WA
www.sv-Alera.com
P 206.463.9200
C 305.409.3660
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Oct 4, 2019, at 2:32 AM, cnc-list-requ
.
No idea about the Octopus drive.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Oct 2, 2019, at 9:44 PM, cnc-list-requ...@cnc-list.com wrote:
>
> Message: 2
> Date: Wed, 2 Oct 2019 21:56:20 -0400
> From: Dave S
> To: C Stus List
&g
hard.
Sure marine in Seattle will probably have what you need. Install was simple.
Good luck.
Tom B
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Sep 29, 2019, at 6:51 PM, cnc-list-requ...@cnc-list.com wrote:
>
> Message: 2
> Date: Sun, 29 Sep 2
If the prop is in the forward configuration when you start sailingthe shaft
will rotate. The Max Prop literature says to put the transmission I yo reverse
to realign the prop blades then put it in neutral. Works for me.
Typoed from my iPhone
Tom Buscaglia
Alera 1990 C 37+/40
Vashon Island WA
Alera came with a three blade Max Prop and I have been very happy with it.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Sep 25, 2019, at 11:00 PM, cnc-list-requ...@cnc-list.com wrote:
>
> From: Bruce Whitmore via CnC-List
> mailto:cnc-list@
out the rear view
mirror.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Sep 1, 2019, at 9:00 AM, cnc-list-requ...@cnc-list.com wrote:
>
> Message: 1
> Date: Sat, 31 Aug 2019 17:36:28 + (UTC)
> From: "Ronald B. Frerker"
> To:
an under power drive, at all.
Good luck!
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Aug 19, 2019, at 1:12 PM, cnc-list-requ...@cnc-list.com wrote:
>
> Message: 5
> Date: Mon, 19 Aug 2019 16:11:24 -0400 (EDT)
> From: CHARLES SCHEAFFER
>
are there actually zerc fittings on the post that I
missed?
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want
Screwed up the topic again...What can I say..after a few weeks out my brain
melted.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
___
Thanks everyone for supporting this list with your contributions. Each and
every
Sorry...shoulda fixed the header.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Aug 9, 2019, at 9:00 AM, cnc-list-requ...@cnc-list.com wrote:
>
> Message: 4
> Date: Fri, 9 Aug 2019 08:41:01 -0700
> From: Tom Buscaglia
> To: cnc-list@cnc-
or long screw
driver.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Aug 9, 2019, at 5:05 AM, cnc-list-requ...@cnc-list.com wrote:
>
> Message: 1
> Date: Fri, 9 Aug 2019 07:44:18 -0400
> From: David Knecht
> To: CnC CnC discussion lis
Ahoy Odessa
Lynn and I are at Genoa Bay (we’re foodies and the restaurant here is
excellent) and should be arriving at Telegraph Harbor around 3 or so today.
Word is there will be 30 beautiful C this year. Should be fun.
I look forward to meeting you.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Typoed from my iPhone
Tom Buscaglia
Alera 1990 C 37+/40
Vashon Island WA
O 206.463.9200
C 305.409.3660
Skype - thombusc
> On Jun 21, 2019, at 8:27 AM, cnc-list-requ...@cnc-list.com wrote:
>
>
> Listers,
>
> Has anyone ever installed some kind of fresh-water connection on
with zincs and is potentially dangerous. But one of our
members who understands this stuff checks the slips periodically and
disconnects any leaky boats until they fix the issue.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On May 31, 2019, at 8:05 AM, cnc-list-r
needing to redo
the entire vessel.
Thanks!
Tom B
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you
Josh
Yep, you solved my riddle...Sailkote by automispell.
Typoed from my iPhone
Tom Buscaglia
Alera 1990 C 37+/40
Vashon Island WA
O 206.463.9200
C 305.409.3660
Skype - thombusc
> On May 12, 2019, at 2:38 PM, cnc-list-requ...@cnc-list.com wrote:
>
> Message: 5
> Date: Sun, 12 Ma
Sailboat worked fine. Squeak gone.
thx
Typoed from my iPhone
Tom Buscaglia
Alera 1990 C 37+/40
Vashon Island WA
O 206.463.9200
C 305.409.3660
Skype - thombusc
> On May 12, 2019, at 9:44 AM, Edd Schillay wrote:
>
> Tom,
>
> Every other season or so, I have the same issue
Short run for opening day yesterday and the steering was squeaking like crazy.
It’s at the quadrant rudder post. There is no grease fitting on the rudder
post like there were on our 35 MK1.
Any fellow 37+ or 34+ folks have a recommended approach to addressing this
issue?
thx
Tom B
Tom
I have a set of LED replacement bulbs for my forward running light. But I’ll
be damned if I can figure out how to access the socket. Before I break
something, any lister with the same fixture (89-94 34+ or 37+) have experience
changing these out?
thx
Tom Buscaglia
S/V Alera
1990 C 37+/40
Mine are teak, not plastic. But these may work
- https://www.fisheriessupply.com/whitecap-industries-teak-finger-pull
At 09:00 AM 5/8/2019, you wrote:
Message: 2
Date: Tue, 7 May 2019 15:59:31 -0400
From: Chuck Borge
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Drawer hole trim
I really like the VHS radio, rather than the bothersome Betamax ones.
At 11:09 AM 4/29/2019, you wrote:
--
Message: 2
Date: Mon, 29 Apr 2019 18:08:44 +
From: "Della Barba, Joe"
To: "'cnc-list@cnc-list.com'"
Subject: Stus-List C as offshore boat? And more 35-2
Is that what you’re looking for?
https://flic.kr/p/buJZba
Tom B
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Apr 26, 2019, at 4:37 PM, cnc-list-requ...@cnc-list.com wrote:
>
> Message: 2
> Date: Fri, 26 Apr 2019 18:23:16 -0400
> Fro
I have a metal rod in front of the rudder, which
I believe is to help avoid seaweed and other
floating debris from fouling the rudder
post. Nothing at all in front of the keel though.
Tom B
.¤º°`°º¤,¸¸,¤º°`°º¤¤º°`°º¤,¸¸,¤º°`°º¤.
Tom & Lynn Buscaglia
SV Alera
C 37+/40
Vashon Island WA
(206)
Al
The trip down the west coast would be fun. Have
you considered joining the Coho Hoho to San
Francisco ( https://cohohoho.com/ ) and then down
to the Baja Haha ( https://www.baja-haha.com/ )to
Maxico? I have heard that it's not uncommon for
people to sail down to Mexico and then truck
I want to replace one of the dc breakers on Alera. Anyone know what model the
breakers are and the amperage, and how to change them out?
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660___
Thanks everyone for supporting
My wife Lynn chose Howard's Feed and
Wax. Carnauba and Bees wax along with a nice
citrus scented oil. Works great for us.
My bad...forgot to change the subject line.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Mar 16, 2019, at 12:43 PM, Tom Buscaglia wrote:
>
> I use a similar set up with a 4:1 block including a cam clear left over from
> my old boat when
on before the boom
goes out.
You can see a bit of the setup in this video https://flic.kr/p/R4eD5F
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Mar 16, 2019, at 10:17 AM, cnc-list-requ...@cnc-list.com wrote:
>
> Date: Sat, 16 Mar 2019 13:16:22 -0400
>
less
that the offer.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Feb 26, 2019, at 8:01 PM, cnc-list-requ...@cnc-list.com wrote:
>
>
> Message: 2
> Date: Tue, 26 Feb 2019 19:52:35 -0600
> From: Brent Driedger
> To: C List
>
I have a vented loop on ours. You may want to check again. It is just aft of
the holding tank and nearly at the deck height.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Feb 2, 2019, at 10:21 AM, cnc-list-requ...@cnc-list.com wrote:
>
> M
I went with the Garhaur but requested the
bearings. they are a PITA to get on without
loosing your balls, but I am pleased with
them. Again, Harken vs Garhauer was a price thing.
.¤º°`°º¤,¸¸,¤º°`°º¤¤º°`°º¤,¸¸,¤º°`°º¤.
Tom & Lynn Buscaglia
SV Alera
C 37+/40
Vashon Island WA
(206) 463-9200
Tom Buscaglia
Alera 1990 C 37+/40
Vashon Island WA
O 206.463.9200
C 305.409.3660
Skype - thombusc
___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use
Fake news.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Jan 5, 2019, at 6:56 PM, cnc-list-requ...@cnc-list.com wrote:
>
> Message: 2
> Date: Sat, 5 Jan 2019 21:54:56 -0500
> From: "Matthew L. Wolford"
> To:
> Subject: Re:
I was perusing the C inventory on Yachtworld
and saw three different boats listed as 1996 36
XL. They arer clearly 34+/36s. But I didn't
think any C's were made after the fire in 94.
Any idea what's up with these boats?
https://www.yachtworld.com/boats/1996/c-c-36-xl-3247141/
You were holding them up side down...that's
probably why the stuff kept falling out.
Have a great weekend all.,..
At 01:02 PM 12/7/2018, you wrote:
Message: 4
Date: Fri, 7 Dec 2018 21:01:40 + (UTC)
From: Richard Bush
To: cnc-list@cnc-list.com
Subject: Re: Stus-List C Logo mugs
I guess I misunderstood what was meant with the inclusion of the Kevlar in the
hull.
Thanks for straightening me out.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Dec 6, 2018, at 11:38 AM, cnc-list-requ...@cnc-list.com wrote:
>
> Date: Thu, 6
¤¤º°`°º¤,¸¸,¤º°`°º¤.
Tom Buscaglia
SV Alera
C 37+/40
Vashon Island WA
(206) 463-9200
www.sv-alera.com
At 07:43 AM 12/6/2018, you wrote:
Message: 2
Date: Thu, 6 Dec 2018 10:15:48 -0500
From: "Matthew L. Wolford"
To:
Subject: Re: Stus-List 1990 37+/40 For Sale [Not Mine!]
Message-ID
!
I wonder what is wrong with it?
Ken H.
On Wed, 5 Dec 2018 at 16:09, Tom Buscaglia via
CnC-List <<mailto:cnc-list@cnc-list.com>cnc-list@cnc-list.com> wrote:
I ran across this listing. WIll someone please
buy this boat to get it off the market. It is
listed way too low and is
I ran across this listing. WIll someone please
buy this boat to get it off the market. It is
listed way too low and is ruining thew 37+ values!
https://www.yachtworld.com/boats/1990/c-c-37-40-3169741/
Tom B
.¤º°`°º¤,¸¸,¤º°`°º¤¤º°`°º¤,¸¸,¤º°`°º¤.
Tom Buscaglia
SV Alera
C 37+/40
Vashon
everyone's discount gets.
Here's my Fisheries Account number 627935...any
of your listers are welcome to try it to see if the discount helps.
Tom B
¤º°`°º¤,¸¸,¤º°`°º¤¤º°`°º¤,¸¸,¤º°`°º¤.
Tom Buscaglia
SV Alera
C 37+/40
Vashon Island WA
O (206) 463-9200
C (305) 409-3660
www.sv-alera.com
I did my sheets, even though hot hay had some use but I think brand new lines
are probably essential. I used one of Brian Toss’ wands...it really made it
simple, as did his related video...
https://www.youtube.com/playlist?list=PLAbM539i4biXLeVK7Teo2fO0spp15Zo-R
Tom Buscaglia
S/V Alera
1990
No Edd...
Shackles flying across the deck in tack or having the shackle scar your dodger
are not good things.
I learned to do an eye splice and went from knots to eyes and a single soft
shackle. Slick looking and no more having the sheets hang up on the baby stay
either.
Tom Buscaglia
S/V
I too have a squeak issue. It seems to be coming from under the
quadrant rather than the base of the pedistal. Rudder seemed tight
when I had her hauled in July...any ideas?
Also, are there any of those grease fittings on the 37+/40?
Tom B
Tom Buscaglia
SV Alera
C 37+/40
Vashon Island WA
Pics please.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Nov 5, 2018, at 7:49 PM, cnc-list-requ...@cnc-list.com wrote:
>
>
> --
>
> Message: 4
> Date: Mon, 5 Nov 2018 17:57:25 -0500
> From: Gary Russe
then.
Guess it does seem like an appropriate punishment... :D
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Nov 4, 2018, at 5:03 PM, cnc-list-requ...@cnc-list.com wrote:
>
> Message: 5
> Date: Sun, 4 Nov 2018 20:03:14 -0500
> From: rick bushie
tem.
Good Luck, Lee
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Nov 1, 2018, at 8:18 AM, cnc-list-requ...@cnc-list.com wrote:
>
> To
___
Thanks everyone for supporting this list with your contribution
I tried to search for it with no luck. One of my
fellow 37+ owners posted a link to pictures of his below deck install.
I'm thinking about doing the same...but can't find that message string.
please re-post the link to the images.
thx
Tom B
.¤º°`°º¤,¸¸,¤º°`°º¤¤º°`°º¤,¸¸,¤º°`°º¤.
Tom & Lynn
Apparently I’m being punished by getting every email direct instead of my usual
Digest...that’s punishment enough!
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Oct 28, 2018, at 5:52 PM, Jim Watts via CnC-List
> wrote:
>
> Bad Tom. Two week
101 - 200 of 481 matches
Mail list logo
