[Elecraft] Sub RX audio in diversity changes when BSET is active

eful when using diversity and split at the same time. I had tried diversity and split before using the REV button but was not able to tune VFO B using that method. So maybe this is an undocumented feature. Mike K2MK __ Elecraft mailing

Re: [Elecraft] K3 owner in spe

he KXV3 I would probably tee the connector to both the AUX RF on the sub RX and RX ANT input on the KXV3. Mike K2MK from Mike Scott Mon, 02 Feb 2009 09:37:05 -0800 >Any comments >regarding the suitability of the following configuration for the mentioned >purposed will be appreciated. K3/100-F

Re: [Elecraft] Mixing audio in split (sub RX)

to have a menu choice. 73, Mike K2MK g7vjr Fri, 06 Feb 2009 11:41:03 -0800 Hi, I've been absolutely thrilled with my K3 since the day it arrived. Before the K3 I had an Orion II. The firmware updates just never materialised - what a difference on the K3. Bravo Elecraft on a very

[Elecraft] CONFIG: TECH MD

sing the M1 through M4 buttons for recording purposes you can also use them for special features. Instructions are in the manual. 73, Mike K2MK On my K3 I often change the AGC -- S setting. I like 5 for general listening, but 20 when I'm net control so I don't miss the weak check-

Re: [Elecraft] Sub vs Split

Wayne provide other uses for the SPLIT button. 73, Mike K2MK Howard K2HK Sat, 14 Feb 2009 09:55:53 -0800 I'm sure this is obvious to most but not to me. I am blaming it on separation anxiety since my K3 only recent returned from Aptos. I have the KRX3 installed and work split using th

Re: [Elecraft] Sub vs Split

e or keyboard. Toggle again to go back to diversity in your right ear. 73, Mike K2MK Bill W4ZV Sat, 14 Feb 2009 13:04:58 -0800 K2MK wrote: > > Also you can't use diversity reception while doing this. You have to > be unlinked. > You can use Split in Diversity, but you must use

[Elecraft] Why no NR in Data modes

I was wondering why the NR feature is unavailable in data modes. During the WPX using AFSK A on 80 meters it seems like it would have been beneficial to have some noise reduction. (I use MixW). Mike K2MK __ Elecraft mailing list Home

[Elecraft] K3 Keyer speed adjustment feature request

coder increments. Or possibly have it as a CONFIG option. (I must agree, however, that the K3 adjustment is vastly improved over my FT1000D which had a skinny knob that was extremely touchy). 73, Mike K2MK __ Elecraft mailing list Home: ht

[Elecraft] K3 receiver desensing on CW during contest

guess this is perfectly normal. I was just wondering what operational trick is available to compensate. 73, Mike K2MK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.ht

Re: [Elecraft] K3 receiver desensing on CW during contest

conditions. 73, Mike K2MK wayne burdick Sun, 22 Feb 2009 18:26:03 -0800 Mike, The K3 is virtually desense-proof, with a BDR of ~140 dB. But to take advantage of this, you need a narrow crystal filter -- the closer to the DSP bandwidth the better. This is exactly the situation that we had

Re: [Elecraft] K3 receiver desensing on CW during contest

went quiet and took about 1/4 to 1/2 second to recover after he stopped sending. 73, Mike K2MK Bill W4ZV Mon, 23 Feb 2009 05:31:37 -0800 K2MK wrote: > > I thought it was interesting that recovery was noticeably slow on the DX > station's frequency when this was happening. However

Re: [Elecraft] K3 receiver desensing on CW during contest

ays try to keep the aggressiveness low. And I did experiment and I still had the same problem with NR off. 73, Mike K2MK Bill Tippett Mon, 23 Feb 2009 09:20:14 -0800 Hi Mike, On Mon, Feb 23, 2009 at 11:00 AM, K2MK wrote: > Here are my CONFIG settings related to the AGC. The only ones I p

Re: [Elecraft] K3 receiver desensing on CW during contest

ed to 50Hz increments. So one touch of the shift knob caused me to lose the signal of interest. 73, Mike K2MK John W2XS Mon, 23 Feb 2009 10:18:02 -0800 Is my summary of the issue correct? If both signals are within both the DSP and roofing filter bandwidths, then the receiver recovers instantly

Re: [Elecraft] K3 Transmit thru Line-In

Hi Mike: LINE-IN with or without VOX works fine here in DATA mode or SSB. But the level settings are not the same between AFSK in DATA (from MixW) and voice in SSB (from WriteLog). The Smiths Thu, 05 Mar 2009 09:58:35 -0800 Dont bother with the line in unless you plan to use DATA mode. The ja

Re: [Elecraft] K3 Upgrade Kit Question

unity mod was done to that board or not. Someone who has the Rev B board in front of them would have to comment on whether choke L1 has been jumpered across (or perhaps removed entirely). 73, Mike K2MK Joel R. Hallas Fri, 06 Mar 2009 13:58:46 -0800 I appreciate that the REMIOUPGD upgrad

Re: [Elecraft] K3 & RIGblaster pro setup

ed in the manual. 73, Mike K2MK Tony McClenny Mon, 09 Mar 2009 14:40:31 -0700 If anyone is using this combination of hardware, please advise the interface cable connections you are using. Thanks. I have been using the RIGblaster pro with my Kenwood TS-570D (has worked very well) and now ne

Re: [Elecraft] Sub RX - Diversity vs. Linked

Hi Ken: In LINKED you can set different filter parameters for the sub. In DIVERSITY the sub filters are the same as the MAIN filters. The modes can be different in LINKED as well (not sure who might find that useful). 73, Mike K2MK Ken Widelitz Sat, 14 Mar 2009 14:47:51 -0700 Is the

Re: [Elecraft] K3

be MAIN in the left ear and SUB in the right ear. If you are using a speaker it would not be obvious. Turn off your SUB and life should be good again. You just need to learn the ropes of the SUB receiver to avoid that from happening. 73, Mike K2MK > > Phil LaMarche > Sat, 21 Mar 2009

Re: [Elecraft] KRX3 antenna input

Hi Jeff: One possible problem is that if you were to accidentally press the ANT button you would transmit into your receive antenna. 73, Mike K2MK jeff kb2m Tue, 07 Apr 2009 15:44:36 -0700 I spent the morning installing a sub rx in my K3 #1516. All is working well. I set it up using the KAT3

Re: [Elecraft] Subreceiver

Hi Bill: You have to re-read Ruben's quote. He wants it for his second K3 that does NOT include the RX input which means he does NOT have a KXV3 board. If you take the KXV3 out of the equation his request makes perfect sense. 73, Mike K2MK Bill W4ZV Sat, 11 Apr 2009 03:19:21 -0700

Re: [Elecraft] K3 data mode power output problem

sound card, are you using Line In or Mic In. How are you setting the level (AGC bars), etc.. Mike K2MK From: wa1...@hotmail.com To: elecraft@mailman.qth.net Subject: Date: Mon, 20 Apr 2009 21:21:41 -0400 when operation the K3 in data mode i only get 50w of power out. but i noticed if i am comin

[Elecraft] Filter feature request

now it displays -NOR-, NORM 1, or NORM 2 while the knob is being pressed and then immediately jumps back to the VFO B frequency. I have to rotate the filter width knob (or double press it) if I want to know the current width. 73, Mike K2MK

[Elecraft] [K3] Interface Cable for SteppIR?

list if you want me to send you a PDF of the schematic. 73, Mike K2MK DM4iM wrote: > > Elecrafters, > to connect the K3 to a SteppIR Antenna-Controller, what cable do i need? > The K3 is already connected to a computer via the serial port. > > Do i need 2 normal RS232-cables w

[Elecraft] OT - K3 SteppIR Vertical and Elecraft Products

well. The antenna length automatically changes as you QSY. 73, Mike K2MK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

Re: [Elecraft] OT - K3 SteppIR Vertical and Elecraft Products

e antenna on the fly. On some bands the antenna changes length every 10KHz and on other bands it changes every 50KHz. It is a totally hands-free operation. 73, Mike K2MK __ Elecraft mailing list Home: http://mailman.qth.net/mailma

Re: [Elecraft] K3 RTTY

fq to zero. Then check AFSK in place of FSK. If this does not help you can send me a screen shot of the TRCVR PTT/CAT screen and I will try to help you. If I cannot help you I know that Rich will be able to help. 73, Mike K2MK FM5CD Fri, 22 May 2009 06:12:25 -0700 Hi all, I'm doing RTTY

Re: [Elecraft] CQ Contest

ears. 73, Mike K2MK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support

Re: [Elecraft] K3 TX light on

Hi Gene: Could be your choice of settings for CONFIG:PTT-KEY. Maybe it changed when 3.63 was loaded. Does it change to receive if you hit your computer escape key? 73, Mike K2MK Gene Thu, 26 Nov 2009 20:36:07 -0800 On 11/25/09 I downloaded latest firmware, MCU 03.63 and DSP1 02.46. While

Re: [Elecraft] Noise reduction setting suggestion for CW

CW, I personally have been using 4-1 to 4-4 exclusively, however, I have also found that 5-1 and 5-2 sometimes seem a bit better. I rarely use SSB but I remember trying it after reading Lyle's posting and the higher numbers did sound better on SSB. 73, Mike

Re: [Elecraft] K3 Broken AF knob and bad service to get a replacement.

Tord: Sorry for your difficulties. I'm sure Elecraft will contact you and make things right. I have a factory assembled K3 from Dec 2008 and both allen wrenches were included in a small envelope. 73, Mike K2MK __ Elecraft ma

Re: [Elecraft] A/B diversity switch

turn diversity off then VFO B would be your sub RX receive frequency as well as your split frequency. Sometimes it is a little tricky to turn diversity off. Always look to see if the decimal is blinking. That's the only way to know for sure if diversity is on or off. 73, Mike K2MK Ralph P

[Elecraft] K3 scanning inconsistency

scanning does not begin until AF ON is displayed. I think for consistency scanning should begin when the scan button is released. 73, Mike K2MK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] [K3] Diversity receive with limited space and RX Antennas

your own, if diversity receive will be beneficial or not. And even if you do get the sub RX, the KXV3 is still highly useful for those times when you want to use your RX antenna on the main RX. 73, Mike K2MK AC7JW Wed, 16 Dec 2009 10:31:08 -0800 Greetings; I've researched the posts on

Re: [Elecraft] Noisy K-3 Receiver

I would like to hear more about the AF Filter Module. I didn't have any initial interest in the DSP board upgrade but maybe I would reconsider if I knew what the AF Filter Module did. Maybe someone who has upgraded could comment. 73, Mike K2MK Lyle Johnson Wed, 16 Dec 2009 09:45:58

Re: [Elecraft] Why K3 appears noisy?

. Thanks, Mike K2MK Wes Stewart Thu, 17 Dec 2009 09:34:56 -0800 I believe I've written about this before, at least to a few, but perhaps it bears repeating. I have done a side-by-side comparison of my K3 with another K3 when "RF" (actually IF) gain was reduced with the AGC on.

[Elecraft] K3 receiver noise questionable test results

leaves me scratching my head as to its results. Maybe someone can enlighten me. I tune to a medium strength CW signal and press my ANT button to switch between ANT 1 and ANT 2. I have nothing connected to ANT 2. The signal disappears but the background noise level remains the same. 73,

Re: [Elecraft] K3 receiver noise questionable test results

round noise is not extreme. It's just always there. 73, Mike K2MK -- From: "Don Wilhelm" Sent: Friday, December 18, 2009 9:01 AM To: "K2MK" Cc: "Elecraft Reflector" Subject: Re: [Elecraft] K3 receiver noise questiona

[Elecraft] K3 AF gain level

is not remembered when you power down. The code is !66; Send it multiple times and the volume will continue to increase. I and others have written to Elecraft requesting this to be a config choice. If you like it you should also write to them. 73, Mike K2MK JayR Fri, 18 Dec 2009 07:04:30

[Elecraft] K3 question to those who have upgraded their DSP board

CW or SSB? Has it improved fidelity? Reduced noise? Speaker or headphones? Any other thoughts? 73, Mike K2MK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

[Elecraft] General question about mail-archive.com

reflector. It used to work just fine but for at least the last month when I press that button I get the following error screen: http://www.mail-archive.com/mailto.php Does anyone else have this problem or do I have something configured incorrectly. 73, Mike K2MK

Re: [Elecraft] Heil Proset-k2 with K3 - Settings please for newbie

ive with these connectors and adapters you should contact Elecraft so that they can investigate. Maybe Heil sent them some Prosets with an incorrect plug arrangement. I'm sure Elecraft contracted with Heil to provide the Proset with an arrangement that would work both front and rear. 73,

Re: [Elecraft] Heil Proset-k2 with K3 - Settings please for newbie

sembly and Operating Instructions (Revision B, April 9, 2006) There is a note under the Headphone Plug Installation Paragraph: "..The remaining 1/4 inch stereo plug pulls apart revealing a standard 1/8 inch stereo plug..." 73, Mike K2MK Dale Harding K7DNH Sun, 28 Jun

[Elecraft] K3 double beep when not connected

turned off both of our computers before bed, and finally accidentally discovered it to be the new GE dishwasher. It beeps at the end of its cycle. 73, Mike K2MK David Ferrington, M0XDF Wed, 01 Jul 2009 00:03:28 -0700 Due to other commitments, I've had my K3 disconnected from everything and

Re: [Elecraft] K3 #1689 - Audio Problems

Hi Chuck: The front headphones will turn off the speaker unless you have CONFIG: SPKR+PH set to YES. You would want it to be set to NO. But then again, maybe two sets of headphones confuses things. Not sure why they cutout. 73, Mike K2MK Chuck Jones Sat, 11 Jul 2009 17:57:51 -0700 GE, We

Re: [Elecraft] Audio Level and Heil Pro Set

e external speaker jack. 73, Mike K2MK Peter Chamalian Sun, 02 Aug 2009 14:06:06 -0700 I've been enjoying my K3 but find the audio output in my Heil Pro Set is rather weak. Is there a mismatch here or some setting that will boost the audio level? Just for the record, I hae the latest pro

Re: [Elecraft] K3 Audio Level and Heil Pro Set

cycle power. 73, Mike K2MK Peter Chamalian Sun, 02 Aug 2009 14:06:06 -0700 I've been enjoying my K3 but find the audio output in my Heil Pro Set is rather weak. Is there a mismatch here or some setting that will boost the audio level? Just for the record, I hae the latest production re

Re: [Elecraft] Mic and Headset

Hi Pete: I'm using the PROSET sold by Elecraft. You can get more audio output from your headphones by plugging them into the rear speaker jack. Set CONFIG:SPKRS to 2 (for stereo). 73, Mike K2MK Peter Chamalian Sun, 06 Sep 2009 05:07:34 -0700 I'm curious as to what others are using

[Elecraft] K3 CW Auto Spot in 3.30 with NR turned on

-2 F5-2 It does not work at all (it doesn't even try) on: F6-2 F7-2 F8-2 I usually have the CWT threshold at 2 but I also tried it at 1 through 4 with the same results. 73, Mike K2MK __ Elecraft mailing list Home: http://ma

Re: [Elecraft] K3 CW Auto Spot in 3.30 with NR turned on

nals or if I increase the filter bandwidth. My initial findings were with a 50Hz filter bandwidth. 73, Mike K2MK -- From: "K2MK" Sent: Wednesday, September 09, 2009 5:17 PM To: "Elecraft Reflector" Subject: K3 CW Auto Spot in

Re: [Elecraft] Strange sound

described in the release notes for MCU 3.03. I don't know if it's also in the latest manual. I personally found the birdies to be easier to tolerate than the software fix for them. 73, Mike K2MK jpk5lad Sat, 19 Sep 2009 10:55:27 -0700 Hi Gary -- I checked today and my "CW sig

Re: [Elecraft] K3 Feature Idea

Hi Wayne: With regard to the VFO coarse tuning. I would use it if it was disabled when the VFO A LOCK function is active. At the present time, the knob is not locked out. I wonder if that was an oversight or if there is a logical operational reason to keep it enabled. 73, Mike K2MK Wayne

Re: [Elecraft] Astron 25 amp supply

year. 73, Mike K2MK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support

[Elecraft] K3 filter ringing at 50Hz

r is the 5 pole 200Hz filter and I am making these assessments with NR off and RX EQ flat. 73, Mike K2MK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailt

Re: [Elecraft] K3 Firmware releases

A ham on the Yahoo K3 Group stated that his new K3 came with 3.27. 73, Mike K2MK Ralph Parker Sat, 17 Oct 2009 11:28:34 -0700 >It would be nice if all the stable items in these betas were incorporated >into a regular release so those of us not interested in being beta testers >could

Re: [Elecraft] K3 Split questions

Hi Mike: I have a SUB RX so it is possible that my comments below might not fully apply if you don't have a SUB RX. VFO A and B can be on separate modes. When you hold the A/B (1) button you'll see b SET on the top display. From there you can change modes, fiddle with filters, preamp, NR, etc

Re: [Elecraft] K3 - KRX3 question

g out the signals. 73, Mike K2MK Bruce Meier Sun, 18 Oct 2009 02:24:02 -0700 I have been chasing Midway Isl (K4M) and using my sub-RX to follow the pack. When K4M was not real loud I would turn the Sub off to get the audio in both ears then back on. After doing that several times (perhaps 10

Re: [Elecraft] K3 changing split?

accidentally bump VFO A and refresh the spot to get back on frequency you may inadvertently deactivate the SPLIT function. (Been there, done that with WriteLog). 73, Mike K2MK On a small number of occasions recently I've been working (what I believed to be) split on CW, and been embarass

Re: [Elecraft] K3 changing split?

Hi Chris: Now that we have the ability to do our own programming we also need some volunteer macro beta testers. 73, Mike K2MK Chris M0PSK Tue, 10 Nov 2009 12:53:02 -0800 Many thanks to all the folks who kindly replied to my query about the K3 changing its split status. I believe (but am not

[Elecraft] K3 ver 03.79 and Palstar AT-AUTO

Hi Bill: I think that problem occurs if you turn off the K3 before quitting the Utility program. It's the quitting of the Utility program that initializes the sequence to return the baud rate that you previously had the K3 set to. It can't do it if the K3 is off. 73, Mike K2MK >

Re: [Elecraft] K3 option request

ne day. Now if you really want to see some fireworks, suggest an APF (audio peak filter) for CW. 73, Mike K2MK > > > Ted Roycraft > Sat, 10 Apr 2010 20:19:44 -0700 > > I think it might be useful at times if the frequency of VFO B could be > displayed as an offset from VFO A

Re: [Elecraft] Storing frequencies and bandwidth

Hi Joe, Looks good, but if Elecraft made it, it would be perfectly integrated with the K3. It could be programmed from the K3 Utility Program and would not require other software to be running for it to work. 73, Mike K2MK -- From: "Joe S

[Elecraft] Split while using Diversity

I see this working is to use XIT instead of split. I'm just not a fan of XIT. So am I missing something? 73, Mike K2MK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info

Re: [Elecraft] Split while using Diversity

n you turn off SPLIT, the VFO B display returns to the original frequency. Thanks for the clarification. 73, Mike K2MK -- From: "Ed K1EP" <[EMAIL PROTECTED]> Sent: Wednesday, December 03, 2008 6:14 PM To: "K2MK" <

[Elecraft] RX EQ comments

or CW and another for SSB. It seems like there should be unique settings for the different modes. Mike K2MK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change

[Elecraft] MixW settings for K3

MixW reflector and found the suggested settings of: RTS set to PTT DTR set to CW MixW now works properly in digital modes and will not erroneously activate transmit if the K3 is in the wrong mode. It does transmit CW properly in the MixW CW mode. 73, Mike

[Elecraft] RTTY using LSB versus AFSK-A

ide in my decision to use MixW. Mike K2MK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Hel

[Elecraft] Re: RTTY using LSB versus AFSK-A

Mode instead of LSB assuming both bandwidths are set the same. Mike K2MK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http

[Elecraft] Re: RTTY using LSB versus AFSK-A

e bandwidth for that one signal. So I'm basically using MixW to autospot the signal using its AFC and then move the signal into the center of the K3 filter passband. I suppose it would be better if I fully understood what I was doing. But why p

[Elecraft] Re: K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna

UX as you left it when you changed it with BSET off. Maybe it's a bug in the code. The sub antenna can be changed from the main display only not from the BSET display. 73, Mike K2MK Re: [Elecraft] K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna Frank

[Elecraft] Re: K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna

BSET display. So Frank's problem in BSET is unique to his K3. Mike K2MK Re: [Elecraft] K3 Subreceiver ANT selection doesn't work - always uses the AUX antenna Barry N1EU Thu, 25 Dec 2008 06:46:31 -0800 K2MK wrote: Maybe it's a bug in the code. The sub antenna can be changed f

[Elecraft] Re: Transmit when switching from DATA to AM mode?

Hi Joe: Consider the possibility of it being the software program you are running on your PC in DATA mode. Quit the program first then switch to AM. It's frequently a safe bet to blame the computer for anything that goes wrong. 73, Mike

[Elecraft] RE: K3 250Hz Filter gain maxed yet low

positive. Instead, set those undesired frequencies negative and leave the desired frequencies at zero. I tried this on my unit and it absolutely was the case. 73, Mike K2MK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a

RE: [Elecraft] K3 and MixW audio input volume

t; but you also have to consider the setting on your PC line-in. And check the back of the K3 to be sure the line out plug is actually plugged into the line out jack and not the headphone or speaker jack. 73, Mike K2MK RE: [Elecraft] K3 and MixW audio input volume Greg Sat, 27 Dec 2008 16:3

[Elecraft] RE: Receive antenna connection

dered. http://www.grove-ent.com/ANTADAP.html 73, Mike K2MK [Elecraft] Receive antenna connection Joe Hoffman Tue, 30 Dec 2008 12:32:26 -0800 I have a K9AY receive loop to connect to my K3. The K9AY box needs a RCA phono plug. I'm afraid I don't recognize what the plug is on the KX

[Elecraft] RE: Obscure RTTY bug?

hope it is not going out in the transmitted signal. 73, Mike K2MK [Elecraft] Obscure RTTY bug? Iain MacDonnell - N6ML Wed, 31 Dec 2008 14:40:25 -0800 Preparing for the ARRL RTTY Round-Up this weekend, I ran into a strange problem. Using "AFSK A" mode, feeding transmit audio into t

[Elecraft] RE: K3 Overdrive using RTTY

0.02 FPF files. Thanks for the tip Doug. This will hold me over until Lyle and Wayne fix it permanently. 73, Mike K2MK [Elecraft] K3 Overdrive using RTTY Doug Alspaugh Fri, 02 Jan 2009 06:04:00 -0800 Lyle, With the current (276/198) I am not able to adjust the sound card input for a clean

Re: [Elecraft] Silly question - what is KEY OUT?

esent, but based on customer feedback, I may change it". 73, Mike K2MK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/m

Re: [Elecraft] Silly question - what is KEY OUT?

Thanks Merv: I stand corrected. I just verified that the Key Out relay is energized when not transmitting. And therefore it is the same as the Key Out on the accessory connector. And when the VOX is off the Key Out will follow the dits and dahs. Learn something new every day. 73, Mike K2MK

Re: [Elecraft] P3 recovery time after spot selection

Hi Tony, You are right on the money. I tried this with MixW and hitting a spot results in an instantaneous P3 update whether the P3 is in Fixed Tune mode or Tracking mode. This is very peculiar situation. I'll have to post it on the WriteLog reflector. 73, Mike K2MK >Tony Estep >

Re: [Elecraft] [K3] Programmable/assignable Split Key?

WriteLog that cause actions to occur on both my K3 and P3. One macro uses the F12 button and the other macro uses the * button on the numeric keypad. 73, Mike K2MK *** [Elecraft] [K3] Programmable/assignable Split Key? Jim Miller Wed, 05 Nov 2014 15:40

Re: [Elecraft] [K3] K3 needs survey -- firmware and application software

might help. 73, Mike K2MK Hi all, As you probably know, we keep a list of firmware features and improvements to be added as time permits. Many of the most-requested changes were made over the past several months, keeping pace with the demands of the fall/winter contest season. (A few

Re: [Elecraft] K3: LPF, bass audio, new DSP board: Stirring the pot?

Hi James: I understand from talking to Elecraft service that they will be offering the LPF board as an add-on for those that don't feel the necessity of changing out the DSP board. No technical details yet. 73, Mike K2MK "I should probably just cough up the money and swap out DSP

Re: [Elecraft] [K3] Diversity and CW?

uld probably be pretty good as a diversity antenna in any mode. If it doesn't, then you just saved yourself the cost of a sub RX and its filters. 73, Mike K2MK from Jim AB3CV Does CW benefit from diversity reception? Can anyone relate any experiences with such improvement and some details on t

Re: [Elecraft] K3_CW_Data_Mode

Hi Ken: The K3 tune button already works in Data mode. At least in AFSK A. Did I misunderstand the question? 73, Mike K2MK from K5DNL" I would like to be able to TX CW while in Data mode, This would allow me to use the tune button on the Yaesu VL-1000 Amp to tune the amp for rtty mode

Re: [Elecraft] Elecraft needs survey

I am also very interested in an audio peak filter for CW. I really found it extremely beneficial on my FT1000D. The RX EQ has potential in this area but it is turned off at narrow bandwidths. 73, Mike K2MK from n4cc Wayne -- I would like to see an audio peaking filter for cw work...perhaps it

Re: [Elecraft] K3: honest question re Audio Peak Filter

d I'm glad I have them. I'd like to have the APF as well. 73, Mike K2MK from previous posts After filtering the cw signal down to 50hz and you kick in an audio filter that has 10db or gain, your jaw drops, your eyes glaze over and you immediately start slobbering about how signals

Re: [Elecraft] [HAM] Hi Q versus Vertical

announced the addition of an optional coil to the SmallIR that will make that antenna work on 80 through 6 meters as does the BigIR. The SmallIR is half the height of the BigIR. Just a bit more stealthy. Maybe it can be made to look like a flagpole. 73, Mike K2MK >From Frank KD8FIP: I am looking for

[Elecraft] K3 popular firmware changes

and sub in right ear in conjunction with using the SUB audio knob as a balance control. 73 Mike K2MK -- View this message in context: http://n2.nabble.com/K3-popular-firmware-changes-tp4286466p4286466.html Sent from the Elecraft mailing list archive at Nabble.com

[Elecraft] K3 kit or factory assembled

A resource for those who are undecided as to whether to build their K3 or have it factory assembled would be a viewing of N5NA's 7 minute YouTube video. http://www.youtube.com/watch?v=DfUMZcwtIyw It's a masterpiece of time lapse photography. And very enjoyable as well. 73, Mike K2M

Re: [Elecraft] K3 DSP AGC Question

? Why would you folks sell a headset that does not complement the K3? I am really disappointed. Mike K2MK >Note that the headphone audio path of the K3 is designed for 32-ohm and >lower headphone impedances. Higher impedance phones provide less audio >for a given transducer efficiency.

Re: [Elecraft] K3 DSP AGC Question

L DX contest is coming up so I think I'll give the 280s a whirl and see which I prefer. 73, Mike K2MK From: Barry N1EU [via Elecraft] Sent: Monday, February 08, 2010 4:44 PM To: Mike K2MK Subject: Re: K3 DSP AGC Question Mike K2MK wrote: I was very disappointed to read your post. I p

[Elecraft] K3 DSP board upgrades delayed

Elecraft says the upgraded DSP board exchanges are taking longer than anticipated. If you got yours please make the exchange quickly so those of us further down the list can get our boards. My order was placed on 1/1/10. 73, Mike K2MK -- View this message in context: http://n2.nabble.com/K3

[Elecraft] K3 auto spot function

ccess Auto Spot from the computer keyboard while running WriteLog. I would like to be able to press either the mouse wheel or F12 to force an Auto Spot. 73, Mike K2MK -- View this message in context: http://n2.nabble.com/K3-auto-spot-function-tp4625990p4625990.html Sent from the Elecraft mailing

Re: [Elecraft] K3 auto spot function

Hi Dick: That's the part that I don't know how to do. I'm hoping someone familiar with WriteLog programming can post a method to accomplish this. 73, Mike K2MK > > Can you cause your logging program to generate the CAT command to simulate > pressing the SPOT button (S

Re: [Elecraft] [K3] LED brightness

is listed under the thread of the original K2 message that you replied to thus limiting the views to those interested in the previous subject. You really need to create a "new" post to get the most bang for your buck. 73, Mike K2MK > > Question for K3 owners: Do you find th

Re: [Elecraft] Mouse Wheel Tuning Rate

WriteLog after you make a change before it will take affect. 73, Mike K2MK > Is there a way to change the tuning rate when using the mouse wheel? I am > running a K3 with writelog. > The mouse wheel advances the 100Hz digit > when turned. I would like to have it tune in 10Hz step

Re: [Elecraft] P3 or KRX3

think you would get with your Sub Rx. There's a very good chance you will actually order different filters when the time comes. 73, Mike K2MK Bill Myers wrote: > > I need some advice about my next upgrade. My K3 (4380) does not have the > sub-Rx, which was my next planned additio

Re: [Elecraft] P3

Hi Dave, You mentioned that you put the P3 on top of the K3. Do you have your K3 tilted up (using the bail) or is your K3 flat? If tilted, I was wondering if the P3 stays put when you push the P3 buttons. 73, Mike K2MK kd1na wrote: > > Everyone, > > Last week I received my

Re: [Elecraft] K3 and WriteLog

WriteLog should write to Steve if they could benefit from this ability. 73, Mike K2MK Fred Atchley wrote: > > If you are a WriteLog user you may want to check out their new webpage > look. > WriteLog has had some succession problems in coming up with the right > people > to take

Re: [Elecraft] FSK power

contact. The benefit of that one single S unit was repeatedly proven to be all that I needed. 73, Mike K2MK Ray Sills wrote: > > The difference in power between 50 watts and 100 watts is essentially > insignificant. If you can't work 'em at 50 watts with the antenna

  1   2   3   4   5   6   >