That’s an American website.
Mike, Coreen & Corey
Keswick Ridge, NB
From: Jorge Diez - CX6VM [mailto:cx6vm.jo...@gmail.com]
Sent: November 21, 2022 9:17 PM
To: Mike Smith VE9AA
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Yamaha Headphones
hello Mike
you have both,
CQWW SSB 2022)
Mike, Coreen & Corey
Keswick Ridge, NB
From: Jim Rhodes [mailto:jimk...@gmail.com]
Sent: November 21, 2022 8:08 PM
To: Mike Smith VE9AA
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Yamaha Headphones
If you want a Koss and an electret mike get an SB45. Basi
I have a pair of CM500's I've used extensively for the past 7-8 yrs.maybe
longer.
I typically wear them from 12-40hrs on any major contest weekend. It would
not be an exaggeration to say
I have well in excess of 1000hrs on them. (a guess..the # might be 2 or
3k.who knows.)
All I did was wear
I'll be there John ! ! !
;-)
Mike VE9AA / ZF2AA
---
Mike,
I hope that you'll be able to operate CQWW Phone from ZF2 this month without
a mic:)
GL,
John KK9A
Mike, Coreen & Corey
Keswick Ridge, NB
From: Mike Smith VE
is THAT simple. They've posted the
delay causes and they can't ship what they don't have. Unbecoming comments
do not help anything and should be directed AT those responsible.
Rick nk7i
Mike, Coreen & Corey
Keswick Ridge, NB
From: Mike Smith VE9AA [mailto:ve...@nbnet
hat this post is about.
Regards,
Mike VE9AA
From: Mike Smith VE9AA [mailto:ve...@nbnet.nb.ca]
Sent: October 8, 2022 12:23 PM
To: 'Elecraft@mailman.qth.net'
Subject: re: communications on KX2 Mic's (MH3)
Dave/AB7E seems to understand the point 100% correctly and a lot of you
Dave/AB7E seems to understand the point 100% correctly and a lot of you are
twisting my (and others) words.
The point is not that I don't have a microphone or that I couldn't cobble
together a connector for from another brand of mic.
I could even (I suppose) find an alternate on Amazon or some
especially
being a ham I believe "communication is key" (in life, business, etc.)
Happy Thanksgiving everyone ! (VE Thanksgiving this weekend)
Mike VE9AA
From: Carl Yaffey [mailto:cyaf...@gmail.com]
Sent: October 7, 2022 3:20 PM
To: Mike Smith VE9AA
Cc: Elecraft@mailman.qth.net
That's great that you're selling these expensive amps, rigs and whatnot and
keeping yourselves going, but how about updates on stuff we've paid for an
not fully rec'd?
Before last Xmas I ordered a KX2 shack-in-a-box kit and rec'd it a couple
months later(no complaints- I knew there was a small
Dean,
I wish I could tell you. I ordered the same kx2 shack-in-a-box before Xmas
last year (after a short 1-2 month wait) and was overjoyed to receive it in
January. I love the rig btw.
They know there was no mic included,(I've sent emails, but there was nothing
indicated on my order that
y 18, 2022 1:05 PM
To: Mike Smith VE9AA
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX2s
Mike, you confirmed what I had been wondering about.. and it sounds like the
radio will ship without the mic which is just awesome to hear!
Thanks for the info. Glad to hear things are still rol
No need. Paid for a mic; will get a mic. (Wayne promised!)
The KX2 is for my motorcycle anyways.
Tnx info !
Mike VE9AA
Mike, Coreen & Corey
Keswick Ridge, NB
-Original Message-
From: D Remy [mailto:d...@dremy.com]
Sent: February 17, 2022 9:29 PM
To: Mike Smith VE9AA
Subject
I got my shack-in-a-box KX2 last month (I did wait 8 or 9 weeks or
something.) No complaints..I knew there'd be a wait, but it shipped without
the microphone. (unbeknownst to me at the time)
I've been told I'll get it when they get them. I know the webpage currently
says:
MH3, Hand Mic for K
I don't think your rig has that feature Ted.
Buy a Winkeyer or a Mortty.
GL
73
Mike VE9AA...
p.s.-there's a fantastic N1MMLoggerPlus group on groups.io
I need advice for getting N1MM+ to play well with a K2. I have tried it
with two different K2 rigs: a K2 with a KIO2, an
I don't think your rig has that feature Ted.
Buy a Winkeyer or a Mortty.
GL
73
Mike VE9AA...
p.s.-there's a fantastic N1MMLoggerPlus group on groups.io
I need advice for getting N1MM+ to play well with a K2. I have tried it
with two different K2 rigs: a K2 with a KIO2, an
I can't math !
Correct my #'s below.
Mike, Coreen & Corey
Keswick Ridge, NB
-Original Message-----
From: Mike Smith VE9AA [mailto:ve...@nbnet.nb.ca]
Sent: December 4, 2021 2:02 PM
To: 'd...@w3fpr.com'; 'Elecraft@mailman.qth.net'
Subject: RE: [Elecraft] El
I can't math !
Correct my #'s below.
Mike, Coreen & Corey
Keswick Ridge, NB
-Original Message-----
From: Mike Smith VE9AA [mailto:ve...@nbnet.nb.ca]
Sent: December 4, 2021 2:02 PM
To: 'd...@w3fpr.com'; 'Elecraft@mailman.qth.net'
Subject: RE: [Elecraft] El
27;t drift above the lower
band edge on 40m once it's warmed up, I think I am going to just leave it be
for now.
Thanks Don !
Mike VE9AA
Mike, Coreen & Corey
Keswick Ridge, NB
-Original Message-
From: Mike Smith VE9AA [mailto:ve...@nbnet.nb.ca]
Sent: November 26, 202
Original Message-
From: Don Wilhelm [mailto:d...@w3fpr.com]
Sent: November 26, 2021 5:52 PM
To: Mike Smith VE9AA; Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft K1 VFO reading
Mike,
The K1 must tune a bit below the low end of each band. That is to
compensate for the crystals on the b
Just bought a K1..an oldie but a goodie, I guess.
NB board and 2 bands board (20/40) No tuner.
So, just playing around, getting familiarized with this new-to-me little rig
before transmitting or hooking it up to a real antenna and I notice:
on 20m: it tunes from 13.974MHz - 14.063MHz
I did not put down a deposit on a K4. When I heard about the first case of
Covid, that stopped me in my tracks. Yes, I know many weren't so lucky and
put $$ down at "Dayton".
I watch the videos from Elecraft or read the great synopsis from fellas like
Kimo, KH7U(and others) and read the mail
Thanks Grant and K9ZTV for the confirmation that I sorta figured it out. (hi)
Mike
Mike, Coreen & Corey
Keswick Ridge, NB
-Original Message-
From: Grant Youngman [mailto:ghyoung...@gmail.com]
Sent: December 8, 2020 5:04 PM
To: Mike Smith VE9AA
Cc: Elecraft Refl
Subject: Re: [Elec
So, I just (today) bought a used KX3. I've owned gobs of Icoms and Yaesu's,
so the Elecraft controls are pretty foreign to me.
I do own a K3 but have quite literally used it 3 times in the 6 or whatever
years I've owned it. It's packed away.
I've looked in the 2 books I've rec'd but it does
de VE9AA.I don't know if the 2 pix imbedded will cross the reflector (they
didn't, this is my 2nd try), but if they don't, then the pads are "Brainwavz
Velour Ear pads" on Amazon.ca for $35.99 CDN and the picture of me..no loss
if you don't see me (big HI HI)
I love my Yamaha CM-500 headphones
Hello friends. Although W.A.R.D is not a contest, it is an activity
event…..and as a bonus there are downloadable certificates for working the
VE/VA/VY "RAC" stations after the event!
CU all tmw (I'll personally be on CW) I’ll be part of the VE9RAC distributed
(maintaining social distancing th
Never saw my post appear so am sending it again sans screenshot-Mike VE9AA
Mike, Coreen & Corey
Keswick Ridge, NB
From: Mike Smith VE9AA [mailto:ve...@nbnet.nb.ca]
Sent: December 9, 2019 5:55 PM
To: 'Elecraft@mailman.qth.net'
Subject: Re: [Elecraft] K3 RIT & OFFSET
S",. hi)
Thanks for the info/advice. Always appreciate your no nonsense words and great
work.
73 de Mike VE9AA
Mike, Coreen & Corey
Keswick Ridge, NB
-Original Message-
From: Don Wilhelm [mailto:donw...@embarqmail.com]
Sent: December 5, 2019 6:23 PM
To: Mike Smith VE9AA
If I was to purchase a new (barebones) K3S today, what are the chances the
2nd receiver module, filters, 2m module and whatever else are going to be
available a year from now (when I can afford more) ?
Thanks !
Mike VE9AA
Mike, Coreen & Corey
Keswick Ridge, NB
_
I have very much enjoyed the recent flurry of posts wrt the KPA1500 (well
done Elecraft).
One semi-related thing I have noticed. (simply due to the sheer volume of
posts this weekend I suppose)
There are one or two fellas who consistently post (often MANY times a day)
without so much as a nam
Big fan of mobile ham radio here...Have always run 100w.
Would like to do more. (500w-1000w)
Has anyone here ever run a KPA500 mobile? (if so, how? Big inverters to
generate 15a @ 115ac?)
Related question...if you haven't run a KPA500 mobile, what amp HAVE you run
mobile?
Thanks
Mi
The weekly CWTs (www.cwops.org) I participate in create a substantial
amount of activity from 28-38kHz up from all the band edges, for 3 x 1 hour
stints,on Wed. each week.
Similary, the NCCC Sprints do the same for ½ each time, once a week Thursday
eve Na time..
The Phone Fray, for voice only fe
I bought my K3 used and it came with very fancy brass? weighted knobs.
I used them a couple times and put the stock ones back on.
I think Wayne et al got it right.
Mike VE9AA
Mike, Coreen & Corey
Keswick Ridge, NB
__
Elecraf
Wonderful ! A better answer I could not imagine.
Thanks Don. Most excellent information.
73, Mike VE9AA
Mike, Coreen & Corey
Keswick Ridge, NB
-Original Message-
From: Don Wilhelm [mailto:donw...@embarqmail.com]
Sent: January 8, 2017 12:45 PM
To: Mike Smith VE9AA; Elec
Hello from NB,
It's Mike, VE9AA...I own a K3 but almost never use it (only for FD and
portable ops -I've used it twice in my year of ownership)
I am thinking about maybe buying a used K2/10 with many options,(no DSP
board I don't think) but as I don't know a thing about the K2 (and after
I run mobile. Have for decades. The past ~5 yrs have been with a Yaesu
FT-857D and a MINI COOPER.
As much as I love my K3 *(and my other radios), if my Yaesu mobile rig died
tomorrow, there is nothing at Elecraft
that could replace it for even CLOSE to the price I could find another 857D
for.
Can the K-POD be used to tune the 2nd receiver in SO2V mode, say in a
contest?
I own an older K3 with the 2nd receiver, but have only used it a couple
times and it remains packed away awaiting the next outing, thus the perhaps
silly question.
Thanks in advance for the answer.
Mike VE9AA
Reported by myself (Mike VE9AA) on the N1MM+ list but described much better
by VE3KI, Rich, below.
Has anyone found a work around to mixed mode SO2V operating when the sub rx
is on SSB?
(incidently, K8UT does not notice this on his K3S)
[Elecraft] [K3] Strange filter behaviour in the subRX
I think I discovered something. Playing with audio levels on the computer,
I think I have this background tone and pulsing coming from the com port
down to acceptable levels.
I cranked the audio way up in Windows (was at a "2") and it seems to nearly
completely mask this interference/feedback wit
A new to me low SN# K3..no problems on CW. Noise blanker now works!
I "think" all the SSB settings are ok.
I run SO2R with a YCCC SO2R+ box, so audio gets routed through a laptop,
then out to the so2r box, then to one of 2 rigs.
When on SSB I hear a moderately loud feedback-ISB noise w/ a
YAY! With a little coaxing from the guys on this list and others, I felt
very brave and partially disassembled the radio and reseated the KNB3 board
and reinstalled.
No luck. Same symptoms.
Phooey !
So I decided to go for broke and swap the KNB3's between the main and sub
receivers. Looking
Just found it. Tony, N2TK asked about the 2nd rx. Good on ya Tony.At
least I am making headway.
Can the KNB3's be swapped guys or is there a lot more to it?
Mike VE9AA
Mike, Coreen & Corey
Keswick Ridge, NB
From: Mike Smith VE9AA [mailto:ve...@nbnet.nb.ca]
Sen
I wish I could find the email from this weekend from the fellow who asked me
if the NB works on the 2nd receiver.
I hadn't used the 2nd receiver really much at all (only had the rig a few
days) and was hesitant to play with it until I learned a little more about
the rig in general.
Anyways - a
M
To: Mike Smith VE9AA
Subject: Re: KNB3 and my noise blanker issue
Mike,
I don't think the flashing on TX is of any consequence. The NB only works
in receive.
Try the various settings. If the particular fence controller has a long
rise time, the NB will not fire on it.
NR may work, but for me
idomaker.com]
Sent: May 15, 2016 8:00 PM
To: David Anderson
Cc: Mike Smith VE9AA; elecraft@mailman.qth.net
Subject: Re: [Elecraft] NB issue
What effect do you expect when transmitting? I would think "nothing" since
NB is a Receive function.
Sent from my iPhone
...nr4c. bill
> On
Yes, it's a K3 early serial #.I just got it yesterday. (sorry about that
- I forgot it was an Elecraft wide list and not just a K3 list - my bad)
I updated the firmware from 4.83 to the newest a couple hours ago, hoping it
would help.
Good on eliminating the mention on newer firmware. Tha
Going through all the menus today (after upgrading to the latest firmware) I
do not see the KNB3 option in my menu system?!
Is that (maybe) why my IF noise blanker is not working? The board is either:
Gone
unhooked
damaged
Ideas?/Comments?
Tnx
Mike VE9AA
Mike, Coreen & Corey
Keswick Rid
That did it Ken ! Nice !!!
I did see the tag "cw weight" on both the rig and in the paper manual, but
as I knew the rig came from a CW man, I didn't mess with it, nor did I look
closely at all the options.
Appreciate it. Thank you.
Mike VE9AA, dit dit
Mike, Coreen & Corey
Keswick R
Hey Guys n' Gals,
Is there some way to lock the VOX, so the next time I turn the rig on, that
if I am on CW, the VOX is on by default?
Yesterday I spent I don't know how long sounding like a lid, calling
stations in the CQ-M contest until I finally heard "QLF" when I called AA3B
about 5 times
So it seems no matter which IF NB setting I have the rig on, the NB will
invariably start to flash once I start transmitting. Maybe I don't
understand what I am doing (quite possible), so this is what I am doing.
See if this sounds correct.
I hear my neighbours electric fence drivi
Sub 100 serial number K3
CW mode, 20m, low SWR.
Mostly using the 500Hz filter.
I don't know the radio at all. . . .but
I press NB, twizzle with VFO A and VFO B and get things set to where I think
they should
be to dampen my neighbours electric fence noise, but after a couple of
I had an IC-7300
.I just mailed it back to the company I bought it from.
This is the first radio I have ever sent back or traded back in EVER.
>From a contesting perspective, it was no good for SO2R operations. The OVF
(overload) light constantly flashed indicating, hey, wait a minute, you
51 matches
Mail list logo