Re: [Emc-users] Emc-users Digest, Vol 227, Issue 20

running it through wine on the cnc controller> >> > just seeing what i can get working currently  and having a play> >> > but would love to ask the linux gurus about it> >> > cheers> >> > Andrew> >> > _______

Re: [Emc-users] [Emc-developers] rt preempt

28-2105ext. 2031 -Original Message- From: andy pugh Sent: Friday, September 20, 2024 1:38 PM To: EMC developers Cc: Enhanced Machine Controller Subject: Re: [Emc-users] [Emc-developers] rt preempt [EXTERNAL EMAIL] Be sure links are safe. On Fri, 20 Sept 2024 at 17:47, Rene Hopf via Emc-

Re: [Emc-users] [Emc-developers] rt preempt

On Fri, 20 Sept 2024 at 17:47, Rene Hopf via Emc-developers wrote: > > Rt preempt is now mainline Is it still a special build configuration, or can it be enabled on released vanilla kernels? -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of

Re: [Emc-users] [Emc-developers] a couple of make errors

On Tue, 28 May 2024 at 19:45, Stuart Stevenson wrote: > ../docs/html/hal/rtcomps.html:1001: parser error : Entity 'pi' not defined > Change to 60 for RPM, to 360 for degrees per second, 6.283185 (= 2*π) It seems to work OK in the version of asciidoc used on Github https://github.com/LinuxCNC/l

Re: [Emc-users] [Emc-developers] distutils - sysconfig

On Tue, 28 May 2024 at 19:16, Stuart Stevenson wrote: > > Configuring linuxcnc gives me a deprecation warning about distutils and > tells me to use sysconfig instead. > On what OS? I just ran ./configure on my 2.9.2 / bookworm folder and there was no such warning. -- atp "A motorcycle is a bi

Re: [Emc-users] [Emc-developers] vismach example movies

On Wed, 22 May 2024 at 20:14, Stuart Stevenson wrote: > Gentlemen, > The wikiQuick links to vismach movies > links do not work. Which link? -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics."

Re: [Emc-users] [Emc-developers] LinuxCNC gathering in Norway - July 5th-7th 2024

On Tue, 19 Mar 2024 at 02:21, Asle Næss via Emc-developers < emc-develop...@lists.sourceforge.net> wrote: The location is a metal workshop 15 minutes drive away from to the > Gardermoen airport (OSL), where there is a lot of space and a hotel only > 5 minutes away by car. We plan to fire up the b

Re: [Emc-users] Emc-users Digest unsubscribe

; > > > Or maybe both, Use the slot and wedge to aligh the table to the nearest > degree and then clamp it with a hydraulic disk brake. Cost is under $100. > > > Thanks for the ideas. In this case I think the disk brake is probably > the best idea, accuracy to the arcsecond isn't needed, just clamp it > where ever is is. I don't even have a legitimate "chuck" on this gizmo. > its a printed square socket with slightly tapered sides to corral a > square maple stick held by a live center at the far end. I can very > easily add a disk of arbitrary diameter to the front face & I'm sure I > could find a motorized driver to push the shoe and lock it for the > duration of boring the hole. > > > > > > > > ___ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > Cheers, Gene Heskett. > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author, 1940) > If we desire respect for the law, we must first make the law respectable. > - Louis D. Brandeis > > > > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

ger, and therefore the angular moves 25.4 times > faster. > >>> > >>> Todd Zuercher > >>> P. Graham Dunn Inc. > >>> 630 Henry Street > >>> Dalton, Ohio 44618 > >>> Phone: (330)828-2105ext. 2031 > >>> > >>>

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

d therefore the angular moves 25.4 times faster. Todd Zuercher P. Graham Dunn Inc. 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 -Original Message- From: Marius Sent: Friday, July 07, 2023 4:17 AM To: emc-users@lists.sourceforge.net Subject: Re: [Emc-users]

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

> On 8 Jul 2023, at 2:21 am, John Allwine wrote: > > Can you attach a G code program that uses G93 that demonstrates the issue > you’re describing with your INI config file you’re using? I think these are the last ones used for my tests. axis_tube_cutting.ini Description: Binary data pip

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

a big effect, making the F settings 25.4 >> times larger, and therefore the angular moves 25.4 times faster. >> >> Todd Zuercher >> P. Graham Dunn Inc. >> 630 Henry Street >> Dalton, Ohio 44618 >> Phone: (330)828-2105ext. 2031 >> >>

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

ular moves 25.4 times faster. Todd Zuercher P. Graham Dunn Inc. 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 -Original Message- From: Marius Sent: Friday, July 07, 2023 4:17 AM To: emc-users@lists.sourceforge.net Subject: Re: [Emc-users] [Emc-developers] Tra

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

Todd Zuercher P. Graham Dunn Inc. 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 -Original Message- From: Marius Sent: Friday, July 07, 2023 4:17 AM To: emc-users@lists.sourceforge.net Subject: Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings [EXTERNAL EMAIL

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

;>>>> we could look at integrating it, but doing it just from comparing the >>>>> code sounds hard. >>>>> >>>>> -- >>>>> atp >>>>> "A motorcycle is a bicycle with a pandemoniu

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

ith a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

le cutting. ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

comparing the >>> code sounds hard. >>> >>> -- >>> atp >>> "A motorcycle is a bicycle with a pandemonium attachment and is >>> designed for the especial use of mechanical geniuses, daredevils and >>> lunatics." >>> —

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

cle is a bicycle with a pandemonium attachment and is > > designed for the especial use of mechanical geniuses, daredevils and > > lunatics." > > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > > > > _______

[Emc-users] [Emc-developers] Trajectory planner shortcomings

https://www.youtube.com/watch?v=KHB5ecOgr2o I think the machine runs off a Beaglebone board. Roland On Thu, 6 Jul 2023 at 18:48, Chris Albertson wrote: > > > > On Jul 6, 2023, at 9:22 AM, Roland Jollivet > wrote: > > > > The small 4-axis CNC machine,'Pocket Nc' uses LinuxCNC as far as I can

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

> On Jul 6, 2023, at 9:22 AM, Roland Jollivet wrote: > > The small 4-axis CNC machine,'Pocket Nc' uses LinuxCNC as far as I can > tell, and it seems to run just fine. Or does it? Does this device move all four axes at the same time while cutting? Or does it use the fourth axis only to repos

[Emc-users] [Emc-developers] Trajectory planner shortcomings

cycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______ >

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

On 7/5/23 08:12, Les Newell wrote: In my experience winding the acceleration up rapidly runs into the law of diminishing returns with increased vibration and in the case of steppers a higher risk of losing steps. Les This is one of the places where the 3 phase stepper/servo really shines. 2

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

On 7/5/23 06:03, andy pugh wrote: On Wed, 5 Jul 2023 at 09:17, wrote: The problem I have is that because 4th axis is rotary motion on my setup, the way the angular rotation speed is handled means the rotary axis rotates at a very slow speed (a fraction of what the G1 linear speed would be).

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

On 7/5/23 04:14, marcus.bow...@visible.eclipse.co.uk wrote: On 2023-07-04 23:21, Sam Sokolik wrote: Lol - then I guess I read too far into it..  I have run 4th axis rotary motion just fine.. The problem I have is that because 4th axis is rotary motion on my setup, the way the angular rotati

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

On Wed, 5 Jul 2023 at 13:14, Les Newell wrote: > > In my experience winding the acceleration up rapidly runs into the law > of diminishing returns with increased vibration and in the case of > steppers a higher risk of losing steps. Yes, that's the point where it is as high as it can be. However

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

In my experience winding the acceleration up rapidly runs into the law of diminishing returns with increased vibration and in the case of steppers a higher risk of losing steps. Les On 05/07/2023 12:56, andy pugh wrote: On Wed, 5 Jul 2023 at 12:28, Les Newell wrote: Are the machine accelera

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

On Wed, 5 Jul 2023 at 12:28, Les Newell wrote: > Due to the shape of the trajectory it has to be done as a series of > short G1 XYZA moves. Without lookahead these short linear moves really > slow down movement. Are the machine acceleration limits as high as they can be? That should help somewha

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

The reason for Marius' original post is that he is trying to use LinuxCNC with SheetCam's 4 axis pipe cutting module. When cutting around the corner on square/rectangular section tubes all 4 axes are moving. Due to the shape of the trajectory it has to be done as a series of short G1 XYZA moves

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

On Wed, 5 Jul 2023 at 09:17, wrote: > The problem I have is that because 4th axis is rotary motion on my > setup, the way the angular rotation speed is handled means the rotary > axis rotates at a very slow speed (a fraction of what the G1 linear > speed would be). This isn't related to the look

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

On 2023-07-04 23:21, Sam Sokolik wrote: Lol - then I guess I read too far into it.. I have run 4th axis rotary motion just fine.. The problem I have is that because 4th axis is rotary motion on my setup, the way the angular rotation speed is handled means the rotary axis rotates at a very

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

ical geniuses, daredevils and >>> lunatics." >>> — George Fitch, Atlanta Constitution Newspaper, 1912 >>> >>> >>> ___ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://list

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

> — George Fitch, Atlanta Constitution Newspaper, 1912 >> >> >> _______ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

On Tue, 4 Jul 2023 at 22:50, Sam Sokolik wrote: > > He is not saying it doesn't work... Actually, he did say that. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Const

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

> > > >> "If we could get hold of the patches that introduced it to Tormach then > >> we could look at integrating it" > >> > >> Maybe a Tormach user could help with that? > >> > >> Martin > >>

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

chine Controller (EMC) Subject: Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings On Tue, 4 Jul 2023 at 18:34, Marius wrote: The problem seems to be that our trajectory planner lack the ability to look ahead for any rotary axis. This means that a coordinated move that includes a r

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

; Sent: Tuesday, July 4, 2023 1:13 PM > To: EMC developers > Cc: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings > > On Tue, 4 Jul 2023 at 18:34, Marius wrote: > > > The problem seems to be that our trajectory pl

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

oller (EMC) Subject: Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings On Tue, 4 Jul 2023 at 18:34, Marius wrote: > The problem seems to be that our trajectory planner lack the ability to > look ahead for any rotary axis. This means that a coordinated move that > includes

Re: [Emc-users] [Emc-developers] Trajectory planner shortcomings

On Tue, 4 Jul 2023 at 18:34, Marius wrote: > The problem seems to be that our trajectory planner lack the ability to > look ahead for any rotary axis. This means that a coordinated move that > includes a rotary move will be dysfunctional at best. It's not as bad as that. There is a 9-axis blend

Re: [Emc-users] [Emc-developers] LinuxCNC gathering in Norway

On Sat, 29 Apr 2023 at 12:00, andy pugh wrote: > > I can probably make it that weekend, but don't want to commit just yet. > (I haven't looked at travel options yet) > Flights are surprisingly cheap, and the hotel looks reasonable, so I have moved my name to "will attend" -- atp "A motorcycle

Re: [Emc-users] [Emc-developers] LinuxCNC gathering in Norway

On Sat, 29 Apr 2023 at 12:00, andy pugh wrote: > > I can probably make it that weekend, but don't want to commit just yet. > (I haven't looked at travel options yet) > Flights seem cheap enough. Do you have the details of the nearby hotel? (That turned out to be comparable to the cost of the tr

Re: [Emc-users] [Emc-developers] LinuxCNC gathering in Norway

On Fri, 28 Apr 2023 at 17:27, Petter Reinholdtsen wrote: > > PS: I am not subscribed to the mailing list, please keep me on CC for > any replies. I can probably make it that weekend, but don't want to commit just yet. (I haven't looked at travel options yet) -- atp "A motorcycle is a bicycle

Re: [Emc-users] [Emc-developers] April 2023 LinuxCNC meeting at Tormach headquarters

On Fri, 17 Mar 2023 at 11:41, Steffen Möller wrote: > > I just checked the travel time and am a bit surprised about this being > minimum 15 hours one-way, more like a median 21 h. That's much longer than I would have guessed. Where is that from? It looks like 9-12 hours from London. I have a p

Re: [Emc-users] Emc-users Digest, Vol 201, Issue 48

unknown' >> Found file(REL): ./12mogmoccapymaster.hal >> ./12mogmoccapymaster.hal:3: Can't find module 'probe_parport' in >> /usr/realtime-2.6.32-122-rtai/modules/linuxcnc >> Shutting down and cleaning up LinuxCNC... >> >> >> Jeff

Re: [Emc-users] Emc-users Digest, Vol 201, Issue 48

This config uses a 5i23- Yes we left it up last night-We usually do, but not always. -- Message: 2 Date: Fri, 27 Jan 2023 11:29:30 -0600 From: "Ray Henry" To: "Enhanced Machine Controller \(EMC\)" Subject: Re: [Emc-users] Not Starting Message-ID: C

Re: [Emc-users] Emc-users Digest, Vol 198, Issue 50

On Wed, 26 Oct 2022, Alan Condit wrote: Date: Wed, 26 Oct 2022 12:10:43 -0500 From: Alan Condit Reply-To: "Enhanced Machine Controller (EMC)" To: EMC-Users Subject: Re: [Emc-users] Emc-users Digest, Vol 198, Issue 50 Well, I kind of feel like an idiot now. I had installed Pree

Re: [Emc-users] Emc-users Digest, Vol 198, Issue 50

.'=) This is Bunny. Copy and paste bunny into your > (")_(") signature to help him gain world domination. > > > > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] Emc-users Digest, Vol 198, Issue 2

On 10/1/2022 4:55 PM, emc-users-requ...@lists.sourceforge.net wrote: Message: 1 Date: Sat, 1 Oct 2022 09:23:44 -0500 From: Thaddeus Waldner To: "Enhanced Machine Controller (EMC)" Subject: [Emc-users] Intel NUC Message-ID: Content-Type: text/plain; charset=utf-8 Hi, I am looking

Re: [Emc-users] Emc-users Digest, Vol 197, Issue 57

; https://lists.sourceforge.net/lists/listinfo/emc-users >> > > > -- > > Chris Albertson > Redondo Beach, California > > > > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/li

Re: [Emc-users] Emc-users Digest, Vol 197, Issue 50

Thanks for any help, I found out that the power supply is OK. I was just not getting a good connection between my multimeter probes and the PSupply. I tested at the drives and the voltage was good. I put a new copy of my .ini and .hal file on pastebin. myPCBMill.ini

Re: [Emc-users] [Emc-developers] Sample Config Testing

On Tue, 14 Jun 2022 at 01:58, Phill wrote: > Should this testing be done using Bullseye? Initially I think that either is probably fine. It's the Python and GTK changes we need to look at. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of m

Re: [Emc-users] [Emc-developers] Sample Config Testing

Original message From: andy pugh Date: 14/6/22 10:49 am (GMT+10:00) To: EMC developers , "Enhanced Machine Controller (EMC)" Subject: [Emc-developers] Sample Config Testing In an online meeting earlier this evening it was concluded that weshould ensure that all the sim co

Re: [Emc-users] Emc-users Digest, Vol 193, Issue 15

ese are "PNP" switches. > > So I'm assuming my 10 meg meter is not enough load to pull it down when > its off. So what value of loading R to common is needed to make it > properly register to a field input of a 7i76 useing a 12 volt field power > src? > >

Re: [Emc-users] Emc-users Digest, Vol 193, Issue 2

The Mesa converter does appear to be just an adaptor Im in South Africa, i think the shipping would not make it worth while, but the offer is very kind, thank you. It may even be less expensive to just buy the adaptors from mesa, then agin you would need 3 of them... Not sure if the firmware for t

Re: [Emc-users] [Emc-developers] Why not have a trivkins setup with a slave axis

://lists.sourceforge.net/lists/listinfo/emc-users ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] [Emc-developers] Why not have a trivkins setup with a slave axis

> On 15 Apr 2022, at 12:52, Marius wrote: > > Just wondering why is it not possible to have a standard three axis trivkins > setup with a possibility to slave a stepgen to any one of the axis. You can do that. In fact it is very easy. net joint.0.motor-pos-cmd stepgen.0.position-cmd stepge

Re: [Emc-users] [Emc-developers] EtherCAT support

Den 2022-03-02 kl. 18:31, skrev Arvid Brodin: On 2022-03-02 18:20, Nicklas SB Karlsson wrote: Den 2022-03-02 kl. 12:28, skrev Arvid Brodin: 1) Etherlab's ethercat master (https://gitlab.com/etherlab.org/ethercat). This software communicates with the ethernet layer and provides a programming

Re: [Emc-users] [emc-users] Harmonic Drive

guess. So if you have a chance to post some photos I'd love to see them. John > -Original Message- > From: Gene Heskett [mailto:ghesk...@shentel.net] > Sent: November-30-21 1:31 PM > To: Emc-users@lists.sourceforge.net > Subject: Re: [Emc-users] [emc-users] Harmonic Dri

Re: [Emc-users] [emc-users] Harmonic Drive

Hi John; I designed and built, from petg, the loose belt version based on Sam idea but quite a bit smaller. I can drive it with a 1NM 3 phase motor which has an 8mm d-flatted shaft after grinding the dflat quite a bit wider. No metal in the hub, its just a press fit on the motor shaft. Consist

Re: [Emc-users] Emc-users Digest, Vol 183, Issue 95

to remove the collet then run it 12 rotations. I think even a > 50:1 with 150 oz-in motor will work. > > And I have an extra stepgen available on the MESA. > > But I already have the butterfly wrench, air cylinder, electric valves, > regulators etc. All but the mech

Re: [Emc-users] [Emc-developers] Code of Conduct

On 6/29/21 12:57 PM, andy pugh wrote: Yes, I read that, and is saddened me. But in more than just the obvious way, because that means that some of us have been acting in a way that upset Kirk, but if you asked us I would bet that not one of us would think that we had. I am not sure that a CoC is

Re: [Emc-users] [Emc-developers] Code of Conduct

say thanks. That's way more than my 2 cents worth Martin ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users __

Re: [Emc-users] [Emc-developers] Code of Conduct

On Tue, 29 Jun 2021 at 19:47, Jeff Epler wrote: > At the same time, it's good to be mindful of how the advice and help we > give will be perceived; I think we should take to heart Kirk's message > in this thread about toxic behavior. Kirk has been in this community a > long time. Yes, I read th

Re: [Emc-users] [Emc-developers] Code of Conduct

On Tue, Jun 29, 2021 at 07:19:08PM +0100, andy pugh wrote: > On Tue, 29 Jun 2021 at 16:39, andy pugh wrote: > > > I largely agree, apart from prohibiting "answering outside the scope > > of the question" > > Thanks for reconsidering this clause, Seb. I see a number of reasonable folks here conc

Re: [Emc-users] [Emc-developers] Fwd: Re: Proposal: Stop supporting Py2 and GTK2 in Master.

On Thu, 2021-05-13 at 14:37 +0200, Rene Hopf wrote: > On 13.05.21 13:26, Valerio Bellizzomi wrote: > > On Thu, 2021-05-13 at 09:54 +0100, andy pugh wrote: > > > On Thu, 13 May 2021 at 07:01, Feral Engineer < > > > theferalengin...@gmail.com> > > > wrote: > > > > > > > I think doing something as >

Re: [Emc-users] [Emc-developers] Fwd: Re: Proposal: Stop supporting Py2 and GTK2 in Master.

Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] [Emc-developers] Fwd: Re: Proposal: Stop supporting Py2 and GTK2 in Master.

On Thu, 2021-05-13 at 09:54 +0100, andy pugh wrote: > On Thu, 13 May 2021 at 07:01, Feral Engineer < > theferalengin...@gmail.com> > wrote: > > > I think doing something as > > dramatic as changing so much of the source code that it could > > essentially > > brick a lot of machines (at least for t

Re: [Emc-users] [Emc-developers] chart of arrays

Den 2021-05-02 kl. 03:06, skrev Jon Elson: On 05/01/2021 12:35 AM, Nicklas SB Karlsson wrote: Den 2021-05-01 kl. 04:52, skrev Jon Elson: NML may send via TCP/IP if configured to, got more time then I was unemployed and have been looking into the configuration file and at least once tried. Zer

Re: [Emc-users] [Emc-developers] chart of arrays

On Wed, 28 Apr 2021 at 05:09, Stuart Stevenson wrote: > Has anyone developed or printed a chart of arrays to use for > visualization during LinuxCNC development? I don't even know what a chart of arrays is. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for t

Re: [Emc-users] [Emc-developers] 5 axis cutter compensation

On Thu, 15 Apr 2021 at 05:49, Stuart Stevenson wrote: > My current attention to the project is driven by my desire to have 5 axis > cutter diameter compensation in LinuxCNC. I think that there is an argument that this is better done in the CAM as it has a much better idea where the material is

Re: [Emc-users] [Emc-developers] primitive code question from a C/C++ newbie

On Wed, 14 Apr 2021 at 14:44, Stuart Stevenson wrote: > > This is really a question about 'primitive level' I think that, in this context, it is referring to realtime code (written in C). The suggestion being that cutter compensation could be done in the trajectory planner rather than in the inte

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

On Sun, 4 Apr 2021 at 17:35, Feral Engineer wrote: On the surface, it looked like I was doing everything correctly. The prox > was set up as software encoder phase Z and it was catching the signal. If you were using a software stepgen you could make it work too: 1) Set up the stepgen in quadra

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

inuxcnc/commit/5ea573adde > > > > > > Also see forum thread starting here: > > > > > > https://forum.linuxcnc.org/10-advanced-configuration/31813-tcp-5-axi > > >s-kinematics?start=120#139881 -- > > > Dewey Garrett > > > > > > > > > > > > _

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

g here: > > > > https://forum.linuxcnc.org/10-advanced-configuration/31813-tcp-5-axi > >s-kinematics?start=120#139881 -- > > Dewey Garrett > > > > > > > > _______ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.n

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

cycle with a pandemonium attachment and is designed > for the especial use of mechanical geniuses, daredevils and lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > _______ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

pr 2021, Feral Engineer wrote: > > > Date: Sun, 4 Apr 2021 12:05:45 -0400 > > From: Feral Engineer > > Reply-To: "Enhanced Machine Controller (EMC)" > > > > To: "Enhanced Machine Controller (EMC)" > > > Subject: Re: [Emc-user

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

On Sun, 4 Apr 2021 at 16:26, Feral Engineer wrote: But that's how I have it set up. The prox is set as encoder index and it > finds it but after it finds it, it goes back to the position the machine > was at during startup. That's what I'm trying to fix. How do i fix this? The point of HOME_USE

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

On Sun, 4 Apr 2021, Feral Engineer wrote: Date: Sun, 4 Apr 2021 12:05:45 -0400 From: Feral Engineer Reply-To: "Enhanced Machine Controller (EMC)" To: "Enhanced Machine Controller (EMC)" Subject: Re: [Emc-users] [Emc-developers] Home_use_index issue revisited I'

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

4 Apr 2021, Dewey Garrett wrote: > > > Date: Sun, 4 Apr 2021 15:36:30 - (UTC) > > From: Dewey Garrett > > Reply-To: "Enhanced Machine Controller (EMC)" > > > > To: emc-users@lists.sourceforge.net > > Subject: Re: [Emc-users] [Emc-developers] Ho

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

On Sun, 4 Apr 2021, Dewey Garrett wrote: Date: Sun, 4 Apr 2021 15:36:30 - (UTC) From: Dewey Garrett Reply-To: "Enhanced Machine Controller (EMC)" To: emc-users@lists.sourceforge.net Subject: Re: [Emc-users] [Emc-developers] Home_use_index issue revisited The git *master*

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

>> > > index_enable hal pin. Applicable only for HOME_USE_INDEX = YES." >> > > >> > > Refs: >> > > >> > > https://github.com/LinuxCNC/linuxcnc/commit/5ea573adde >> > > >> > > A

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

gt; > > > > Refs: > > > > > > https://github.com/LinuxCNC/linuxcnc/commit/5ea573adde > > > > > > Also see forum thread starting here: > > > > > > > > > https://forum.linuxcnc.org/10-advanced-co

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

On Sun, 4 Apr 2021, Feral Engineer wrote: Date: Sun, 4 Apr 2021 11:40:54 -0400 From: Feral Engineer Reply-To: "Enhanced Machine Controller (EMC)" To: "Enhanced Machine Controller (EMC)" Subject: Re: [Emc-users] [Emc-developers] Home_use_index issue revisited What kin

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

ng here: > > > > > https://forum.linuxcnc.org/10-advanced-configuration/31813-tcp-5-axis-kinematics?start=120#139881 > > -- > > Dewey Garrett > > > > > > > > ___ > > Emc-users mailing list > > Emc-users

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

ion/31813-tcp-5-axis-kinematics?start=120#139881 > -- > Dewey Garrett > > > > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

rom: Feral Engineer > > Reply-To: "Enhanced Machine Controller (EMC)" > > > > To: "Enhanced Machine Controller (EMC)" > > > Subject: Re: [Emc-users] [Emc-developers] Home_use_index issue revisited > > > > But that's how I have it

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

The git *master* branch has an ini setting that may be relevant for this use case: http://linuxcnc.org/docs/master/html/config/ini-config.html "HOME_INDEX_NO_ENCODER_RESET = NO - Use YES if the encoder used for this joint does not reset its counter when an index pulse is detected after assertion

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

On Sun, 4 Apr 2021, Feral Engineer wrote: Date: Sun, 4 Apr 2021 11:23:32 -0400 From: Feral Engineer Reply-To: "Enhanced Machine Controller (EMC)" To: "Enhanced Machine Controller (EMC)" Subject: Re: [Emc-users] [Emc-developers] Home_use_index issue revisited But that

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

Controller (EMC)" > > > > To: "Enhanced Machine Controller (EMC)" > > > Subject: Re: [Emc-users] [Emc-developers] Home_use_index issue revisited > > > > That's the thing, though. The behavior is completely arbitrary based on > > wher

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

On Sun, 4 Apr 2021, Feral Engineer wrote: Date: Sun, 4 Apr 2021 11:04:10 -0400 From: Feral Engineer Reply-To: "Enhanced Machine Controller (EMC)" To: "Enhanced Machine Controller (EMC)" Subject: Re: [Emc-users] [Emc-developers] Home_use_index issue revisited That

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

k about this weird behavior, considering > everything else is set to zero. > > I'm on my way to go get the information Andy requested. > > Phil T. > The Feral Engineer > > Check out my LinuxCNC tutorials, machine builds and other antics at > www.youtube.com/c/thefera

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

erything else is set to zero. I'm on my way to go get the information Andy requested. Phil T. The Feral Engineer Check out my LinuxCNC tutorials, machine builds and other antics at www.youtube.com/c/theferalengineer On Sun, Apr 4, 2021, 10:51 AM Scott Harwell via Emc-users < emc-users@

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

hanical geniuses, daredevils and lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > _______ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

eer > > ___ > Emc-developers mailing list > emc-develop...@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > > > > ___ > Emc-users mailing list > Emc-use

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

On Sun, 4 Apr 2021 at 15:28, Feral Engineer wrote: I'm driving the steppers with the stepgens on the 7i76e, but when the axis > hits the mechanical switch, it sets the DRO to zero against that, moves to > the prox pulse then goes back to the original startup position then sets > zero back to ther

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

l Engineer wrote: > > > Date: Sun, 4 Apr 2021 10:04:29 -0400 > > From: Feral Engineer > > Reply-To: "Enhanced Machine Controller (EMC)" > > > > To: "Enhanced Machine Controller (EMC)" > > > Subject: Re: [Emc-users] [Emc-developers

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

On Sun, 4 Apr 2021, Feral Engineer wrote: Date: Sun, 4 Apr 2021 10:04:29 -0400 From: Feral Engineer Reply-To: "Enhanced Machine Controller (EMC)" To: "Enhanced Machine Controller (EMC)" Subject: Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

ailing list > emc-develop...@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > > > > _______ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-us

Re: [Emc-users] [Emc-developers] Home_use_index issue revisited

On Sun, 4 Apr 2021 at 04:58, Feral Engineer wrote: > Finally getting back around to messing with this mechanical/prox home > issue. See attached video link. I show what it is doing and explain what I > want it to do. > What feeds joint.0.motor-pos-fb ? -- atp "A motorcycle is a bicycle with a

  1   2   3   4   5   6   7   8   9   10   >