Hi Dave,
At 08:02 AM 1/9/2002 -0600, you wrote:
>Because DHCP depends on a server to supply the information, you are
>rather at the mercy of your ISP as to how quickly they give you an IP
>address.
Yes. I agree.
The reason why I continue pursuing this case is on the same PC Win2K can
detect m
Hi Dave,
Thanks for your response.
At 08:12 AM 1/8/2002 -0600, you wrote:
>Forgive me for sounding obtuse, but I am not sure what you are asking.
>Perhaps you could rephrase the question?
I need to accelerate the detection of the dynamic IP address of my ISP's
DNS server at boot. I tried sev
Thanks Randy for your advice
B.R.
Stephen
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi All People,
Kindly advise a simple and straightward method to configure network
settings in using DHCP to improve the detection on dynamic IP address.
Thanks in advance.
B.R.
Stephen
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi Rusty,
Thanks for your detail advice and time spent.
At 07:56 AM 1/7/2002 -0700, you wrote:
>None of these can be told by inspection of the box, eh? Maybe
>the documentation will tell, maybe not.
>
>And, admittedly, its somewhat esoteric and not REALLY important
>to most network setups that
Thanks altoine
B.R.
Stephen
At 10:59 AM 1/6/2002 -0600, you wrote:
>Stephen Liu wrote:
>
>>Hi Michael,
>>
>>Thanks for your detail information and time spent.
>>
>>At 10:52 AM 1/5/2002 -0600, you wrote:
>>
>>>AFAIK, you can't (could be
Hi Rusty,
Thanks for your advice.
At 09:55 AM 1/6/2002 -0700, you wrote:
> > Can 2 Linux boxes (or one Linux box and one Win box) both having 10/100Mb
> > network cards installed be connected directly with cross-over cable for
> > file/data transfer without going through a hub.
>
>Yes, they can
Hi Ken,
Lot of thanks for your information and the document attached to your
email. It is rather interesting.
Appreciated for your effort. I will try according to your guidance.
Thanks
B.R.
Stephen
At 06:41 PM 1/5/2002 -0700, you wrote:
>On Saturday 05 January 2002 09:22 am, you wrote:
> >
Hi Michael,
Thanks for your detail information and time spent.
At 10:52 AM 1/5/2002 -0600, you wrote:
>AFAIK, you can't (could be wrong). You'd have much better success going
>through the hub.
Can 2 Linux boxes (or one Linux box and one Win box) both having 10/100Mb
network cards installed be
for really straight forward use of samba to transfer files. I
>realize this is a short explination but most of the info is covered in
>the above how to's and would make a really long e-mail.
>
>James
>
>On Sat, 05 Jan 2002 09:42:59 +0800
>Stephen Liu <[EMAIL PROT
Hi,
Thanks for your information. I will check the archives re Samba
B.R.
Stephen
At 01:45 AM 1/5/2002 -0500, you wrote:
>On Fri, 04 Jan 2002 23:19:48 -0600
>nds <[EMAIL PROTECTED]> studiouisly spake these words to ponder:
>
> > Stephen Liu wrote:
> >
> > &
:19 PM 1/4/2002 -0600, you wrote:
>Stephen Liu wrote:
>
>>Hi All People.
>>
>>Can I make use of lan hub to connect a Win box and Linux box for
>>files/data transfer ?
>>
>>If yes, then how.
>&
Hi All People.
Can I make use of lan hub to connect a Win box and Linux box for files/data
transfer ?
If yes, then how.
Thanks in advance.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
question for 3 hard discs
c) What does it mean "Low ratio of ECC (Parity) disks to data disks means
high efficiency" ?
Thanks in advance.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi All People,
Kindly advise :
How to test the performance of a Video Card
Thanks in advance.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
when inserted
Thanks in advance.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
place.
6) What are the difference between openssl-0.9.6b-8.i386.RPM and
openssh-server-2.9p2-7.i386.rpm
Kindly advise.
Thanks in advance.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
ord and am absolute
sure the USER name and password entered are correct.
With the same USER name and password I can connect the same ISP mail server
in Eudora and Outlook Express to download emails.
Kindly help !!!
Thanks in advance.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
card
Motherboard 2th max 8KHA
Kindly advise how to re-config the sound server and where can I find the
driver.
Thanks in advance.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
At 10:19 PM 11/14/2001 -0500, you wrote:
>I didn't follow the whole thread; but if you can get your mail with Eudora,
>disconnect and then get more mail with Eudora again without problem, then this
>is not the issue.
>
>The problem (an old one now) was that the POP server would fork a process
>("p
Hi Pierre,
> Have you checked with your ISP to see
Could you please explain in more detail about " if there is a "popper"
process still running for your userid..? "
But I can't understand why with the same settings including password and
login Eudora running on OS Win can download the emails.
it works fine on Mandrake 7.2, and RH7.1
B.R.
Stephen Liu
At 06:56 PM 11/13/2001 -0500, you wrote:
>Have you checked with your ISP to see if there is a "popper" process still
>running for your userid..? There was once a bug where certain ungraceful
>disconnects would lea
Hi Tom
>Are you absoloutely sure your email is not supposed to be retrieved
>encrypted? i.e through ssl? Also, have you tried setting up fetchmail to do
>it (install fetchmailconf to make your life much easier there) as this has
>support for various pop protocols, and not just pop3. If you cant m
Hi Dave,
Thanks for your advice.
I think that most likely the problem came from my OS - Mandrake 8.1
When I tried Evolution, on retrieving email from ISP it prompted :
evolution - mail
(Process. 2623)
has crashed due to fatal error
(Segmentation fault)
I could not connect to the email server
"login" or "password" it prompted
_ERR. authorization first.
I tried to locate the log file but could not discover it.
Have you had any recommendation ?
Thanks in advance.
B.R.
Stephen
>|-Original Message-
>|From: Stephen Liu [mailto:[EMAIL PROTECTED]]
Unfortunately now I could not recall the steps taken to make such
a remedy.
Thanks
B.R.
Stephen Liu
At 11:35 PM 11/9/2001 +, you wrote:
>-BEGIN PGP SIGNED MESSAGE-
>Hash: SHA1
>
>On Friday 09 Nov 2001 5:02 pm, you wrote:
> > Hi All People,
> >
> > I
nstead of rebooting the PC, is there any easy way ? )
>|-Original Message-
>|From: [EMAIL PROTECTED]
>|[mailto:[EMAIL PROTECTED]] On Behalf Of Stephen Liu
>|Sent: Friday, November 09, 2001 9:55 PM
>|To: Tom Badran
>|Cc: [EMAIL PROTECTED]
>|Subject: Re: [expert] Kmail c
Thanks Sergio
B.R.
Stephen
At 02:39 PM 11/9/2001 -0600, you wrote:
>On Friday 09 November 2001 05:45 am, you wrote:
> > Hi Sergio,
> >
> > Thanks for your advice.
> >
> > At 01:40 AM 11/9/2001 -0600, you wrote:
> > >Postfix as being more 'secure'
> > >
> > >If you're running 8.1 go to Control Ce
nstead of rebooting the PC, is there any easy way ? )
>|-Original Message-
>|From: [EMAIL PROTECTED]
>|[mailto:[EMAIL PROTECTED]] On Behalf Of Stephen Liu
>|Sent: Friday, November 09, 2001 9:55 PM
>|To: Tom Badran
>|Cc: [EMAIL PROTECTED]
>|Subject: Re: [expert] Kmail c
shall try to fix this problem starting from telnet to see whether
there is any solution.
Thanks.
B.R.
Stephen
>Stephen Liu wrote:
> >
> > Hi Tom,
> >
> > Thanks for your advice.
> >
> > I used POP and repeated numerous configuration on Kmail settings as
>
Unfortunately now I could not recall the steps taken to make such
a remedy.
Thanks
B.R.
Stephen Liu
At 11:35 PM 11/9/2001 +, you wrote:
>-BEGIN PGP SIGNED MESSAGE-
>Hash: SHA1
>
>On Friday 09 Nov 2001 5:02 pm, you wrote:
> > Hi All People,
> >
> > I
Under Encryption
- blank all items
Under Authentication method
Tried all items
Each time when I checked mail, following warning pop-up
...
.
I said "pass "
And then the server said
"-ERR authorization failed"
I tried numerous times and am quite sure the login and
list came across such strange thing ?
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
# essentially address rewriting. you probably won't
>need that.
That shall be sufficient for me to start. What is "address rewritting" ?
Thanks in advance.
B.R.
Stephen
>-----Original Message-
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED]]On Behalf Of S
29y
> >d D0mcF9yb3dfY250PTgwJnBfcGFnZT0x&p_li=
> >
> > Basically, they are working on Mandrake 8.1 support.
> >
> > -Original Message-
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]On Behalf Of Stephen Liu
> > Sent: Thursday, November 08, 200
n >> Packaging >> Software Manager
or with
2) KDE >> Configuration >> Packaging >> Software Manager
But I am not sure which components shall be selected, being only familiar
with starting from fresh installation which is not my wish.
Any recommendation shall be much
clients ?
Thanks in advance.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
not get Ximian installed.
Another guy on the List recommends me visiting following site for information
http://support.ximian.com/cgi-bin/ximian.cfg/php/enduser/std_adp.php?p_sid=
But unfortunately I am not allowed to view it without permission.
Any suggestion ?
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
41&p_sp=cF9ncmlkc29yd
>D0mcF9yb3dfY250PTgwJnBfcGFnZT0x&p_li=
>
>Basically, they are working on Mandrake 8.1 support.
I am not allowed to view this page (permission deny). Any other suggestion.
Thanks in advance.
B.R.
Stephen
>-Original Message-
>From: [EMAIL PROTECTED]
>[ma
Hi Quintin
Thanks for your advice.
Stephen Liu
At 03:30 PM 11/8/2001 -0800, you wrote:
>Your answer is on their support site at:
>http://support.ximian.com/cgi-bin/ximian.cfg/php/enduser/std_adp.php?p_sid=E
>95QRH_f&p_lva=&p_refno=011010-02&p_created=10027328
ance.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi All People,
Mandrake-Linux 8.1
==
How to upgrade/re-install components from ISO Image CDs which have not be
selected at 1st installation, not by RPM nor by re-installing the whole
software
Thanks in advance.
B.R.
Stephen Liu
Want to buy your Pack or Services from
t brought back
Mandrake-Linux 8.1 but the mouse still died.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi Larry,
Thanks for your response.
>The biggest problem I've
>seen is not setting the "PNP OS to No". Not setting this will cause
>numerous problems during the installation phase.
On PNP AND PCI Setup page of BIOS (Award Software Inc.)
Setting is as follow:
PNP OS Installed : NO
B.R.
Stephe
Hi Larry,
Thanks for your response.
>The biggest problem I've
>seen is not setting the "PNP OS to No". Not setting this will cause
>numerous problems during the installation phase.
On PNP AND PCI Setup page of BIOS (Award Software Inc.)
Setting is as follow:
PNP OS Installed : NO
B.R.
Stephe
psux
crw - r - - - - rootrootrtc
Any guy on the list has encountered the aforesaid problem previously please
advise.
Thanks in advice.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi Jose,
Thanks for your response and further assistance.
At 09:45 AM 10/20/2001 -0400, Jose M. Sanchez wrote:
>One common source of problem which 8.1 exacerbates, through no fault of
>it's own, is DMA on CD-ROM drives.
>
>Some CD-ROM/R/W drives do not co-exist well with hard drives on the same
us burnt can be cross-used for
installation. Un-matching md5sum became un-important.
P.S. My PC, hard disc and CDROM proved in good condition. Mandrake-Linux
7.2 can be installed and run properly in the same PC and hard disc
B.R.
Stephen Liu
-JMS
>|-Original Message-
>|F
Charles,
Thanks
Stephen
At 11:25 AM 10/19/2001 -0400, Charles A Edwards wrote:
>On Fri, 19 Oct 2001 23:20:52 +0800
>Stephen Liu <[EMAIL PROTECTED]> wrote:
>
> > Hi Charles,
> >
> > Thanks for your advice.
> >
> > Fortunately I got some Yamaha KHS 1
Hi Charles,
Thanks for your advice.
Fortunately I got some Yamaha KHS 16X 700MB CD-R in stock. I will give
them a trial in addition to other mode suggested by some other guy on the
list. What burning speed will you suggest ? My CD writer can burn 12X speed.
B.R.
Stephen Liu
>Step
.
Stephen Liu
At 09:46 AM 10/19/2001 -0400, you wrote:
>Yeah!
>
>Well at least now you have the MD5 sums correct!
>
>You may want to select a slower burn I.E. 2x.
>
>Faster burns require finely balanced media. Since the CD's have little
>read protection you may end up wi
available.
Thanks.
B.R.
Stephen Liu
At 09:16 PM 10/19/2001 +0800, you wrote:
>Hi Jose,
>
>Thanks for your response.
>
>I could not discover the cause for what has happened to my incident.
>
>This time I closed the Anti-virus and other protection software of my
>Windows P
.
Thanks in advance.
B.R.
Stephen
At 08:32 AM 10/19/2001 -0400, you wrote:
>Yeap, that's what you get for ignoring the MD5SUMs errors I mentioned to
>you!
>
>-JMS
>
>
>|-Original Message-
>|From: [EMAIL PROTECTED]
>|[mailto:[EMAIL PROTECTED]] On Behalf Of
.rpm
xmms-skins-1.0.0-11mdk.noarch.rpm
I checked RPMNet but could not find them there.
Kindly advise where can I have them downloaded.
Thanks in advance.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
-Once
2. To select which write speed
a) 2 x (300KB/sec)
b) 4 x (600KB/sec)
c) 8 x (1200KB/sec)
3. Can I use CD RW disc for multi-record CDROM for software installation
4. How to check the recording condition of the CD after burning.
Thanks in advance.
B.R.
Stephen Liu
Want to buy your
in this runlevel
The PC hanged on forcing me to re-boot the PC
No improvement made after re-starting. I tried twice re-installing
Linnux-Mandrake 8.1 with the same result
Could any guy on the list shed me some light. Thanks in advance.
Best Regards
Stephen Liu
At 03:26 PM 10/4/2001 +0800, you
installed/upgraded it to Mandrake 8.0. But I still could not get
the later to work. At re-start the same warning signal prompts.
Would it be the bug problem of Mandrake 8.0 ? ? ?
Best Regards
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http
57 matches
Mail list logo