Re: [Flexradio] Death notification

Maria, So sorry for your loss. What was his ham call?? 73, Dudley WA5QPZ Sent from my iPhone > On Aug 16, 2016, at 6:27 AM, t...@sideswiper.plus.com wrote: > > Hi, > > This is Tim's daughter Maria, this is to advise you that Tim died last week, > so can you please remove him (t...@sidesw

Re: [Flexradio] Flex 3000 no headset sound or power after reinstalling Windows 10

Darryl, I suspect you are missing part of the FireWire driver,leave the radio off, remove the FlexRadio driver in the Programs and features, REBOOT the computer, rerun the PowerSDR installer, REBOOT , be sure the computer is completely rebooted , then turn the radio on . Be sure to wait

Re: [Flexradio] Flex3000 no tx on 40m

David, Try resetting your database, if that does not cure it , you will need a RMA from Help Desk for repair. 73, Dudley WA5QPZ Sent from my iPhone > On Apr 16, 2016, at 10:28 PM, David Walker wrote: > > Hi, > > My flex has ceased transmitting RF on 40m. No RF out with SSB, CW and T

Re: [Flexradio] No Output on Flex 1500

Hal, The 1500 RF output is really tough, Are you sure that you reset your database to Factory Defaults ?? 73, Dudley WA5QPZ Sent from my iPhone ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail

Re: [Flexradio] Windows 10 and virtual com ports?

VSP Manager, VSPE, just to name two. 73, Dudley WA5QPZ Sent from my iPhone > On Feb 20, 2016, at 8:49 PM, Darryl Wagoner wrote: > > My old Dell died and I decided to move my PowerSDR to my little acer > quad-amd, which I had already upgraded to Win 10. > > When I started looking at it,

Re: [Flexradio] Using a Flex 5000 through USB3

dworks well > > -Original Message- > From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of > Dudley Hurry > Sent: Thursday, February 18, 2016 7:55 PM > To: Drax Felton > Cc: flexradio@flex-radio.biz > Subject: Re: [Flexradio] Using a Flex 5000 through USB3 &g

Re: [Flexradio] Using a Flex 5000 through USB3

I don't think you are going to eSata to FireWire to work, but several have tested ThunderBolt to FireWire adapters working very well. Many of the newer iMacs have ThunderBolt and Apple and several others have ThunderBolt to FireWire adapters. And the ThunderBolt adapter cards and motherboard

Re: [Flexradio] Using a Flex 5000 through USB3

Dale, USB3 can not support the through put of the FIreWire. As it can not the number of full duplex channels . 73, Dudley WA5QPZ Sent from my iPhone > On Feb 17, 2016, at 5:00 PM, Dale Taylor wrote: > > Is it possible to use a Flex 5000 via a USB3 cable and a Firewire adapter? > > I a

Re: [Flexradio] Corrupted Flexradio

Brian, To fix the out of band display, reset your PowerSDR DATABASE, select "Factory Defaults " . If the second issue continues, place a ticket with the FlexRadio Help Desk. 73, Dudley WA5QPZ Sent from my iPhone > On Jan 1, 2016, at 2:12 PM, br...@eol.co.nz wrote: > > Hi, > This is

Re: [Flexradio] Flex 5000 bad sensiity on all bands

Try moving your antenna to the RX1 port and change the RX to RX1 input, see if the signals come up. If they do, most likely the RFIO board in the rear with the antenna connections and relays. 73, Dudley WA5QPZ Sent from my iPhone > On Dec 13, 2015, at 12:22 AM, Lars Pettersson wrote: >

Re: [Flexradio] Persistence and DAX issues -6300

Paul, Your DAX not being consistent maybe the way windows enumerates the sound devices when Windows boots. You need a speaker in the Playback properties of Sound Properties and a line in or mic in the Record , this is just to keep default sounds off the DAX drivers. If you don't have somethin

Re: [Flexradio] [FlexRadio] Need suggestions to check on why my laptop keeps freezing with PSDR 2.7.2

Mark, I bet if you cure the DPC problem, you will fix it ..Run LatencyMon from Resplendence.com. It's free and it will just about tell you what process is eating up you resources. 73, Dudley WA5QPZ Sent from my iPhone > On Jul 20, 2015, at 8:44 PM, Mark Lunday wrote: > > DPC is con

Re: [Flexradio] Radio

Bill, Make sure that you have the interlocks and Tx Inhibit disabled in Radio Setup -> Transmit tab unless you are using them . 73, Dudley WA5QPZ Sent from my iPhone > On Jul 20, 2015, at 11:35 AM, Bill and Sue wrote: > > Uh O My 6300 seems to have a problem. When I click on Tune,

Re: [Flexradio] Calibrate 5000 S Meter

> On Jul 11, 2015, at 3:11 PM, ke...@3950.net wrote: > >> On 7/10/2015 7:43 PM, Dudley Hurry wrote: >> Harry, >> >> Check your S-meter in the Flex, go to the Tests tab of Setup. Click the >> box in the lower left corner labeled. "Enable HW Generator&q

Re: [Flexradio] FlexRadio Digest, Vol 123, Issue 6

io-ow...@flex-radio.biz > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of FlexRadio digest..." > > > Today's Topics: > > 1. Calibrate

Re: [Flexradio] Calibrate 5000 S Meter

Harry, Check your S-meter in the Flex, go to the Tests tab of Setup. Click the box in the lower left corner labeled. "Enable HW Generator".Put the radio in any ham band, mode in DSB. the reading above the s-meter should be -24dbm plus or minus 1dbm.Do that with the 9800.. 73, D

Re: [Flexradio] Manual

Bill, Go to the FlexRadio home page -> Support -> Downloads -> "Flex Signature " -> Documentation .. There you will find the Flex-6000 Hardware Reference Guide.Then under SmartSDR -> Documentation , you will want the SmartSDR SW User Guide and SmartCAT Guide 73, Dudley WA5QPZ Se

Re: [Flexradio] Full duplex with VAC?

Alan, What application are trying to go too? VAC is not muted in TX , but you should have two virtual lines , one for RX and one for TX . 73, Dudley WA5QPZ Sent from my iPhone > On May 24, 2015, at 6:39 AM, Alan wrote: > > Hi, > > My VU5K works full duplex for voice audio on split bands

Re: [Flexradio] griffin power mate install

Dale, Exact same. 73, Dudley WA5QPZ Sent from my iPhone > On Mar 17, 2015, at 2:57 PM, w...@reagan.com wrote: > > I used a power mate years back on my sdr-1000. Now a 5000a with 2.7.2 is the > install the same as it was with the old version of power sdr? > thanks > dale wt4t > > > __

Re: [Flexradio] virtual com ports

Keith, Sounds like you do not have full administrative rights to save the changes. Next time you open the program, do a right click and select. "Run as Administrator" This way it can save the changes ... 73, Dudley WA5QPZ Sent from my iPhone > On Oct 24, 2014, at 5:26 AM, Keith Morris

Re: [Flexradio] "PowerSDR has stopped working"

Eric, Have you tried another FW cable? 73, Dudley WA5QPZ Sent from my iPhone > On Sep 20, 2014, at 1:53 PM, "Eric Lowell" wrote: > > Hi All, > > Last week, I was fighting unhandled exceptions. Now I'm back at it, but the > unhandled exceptions have gone. > > I went back to my oldest rest

Re: [Flexradio] Power Supply Advice

Keep am eye on the analog power supplies , over time they will begin to lose voltage regulation and will need to be repaired or replaced. 73, Dudley WA5QPZ Sent from my iPhone > On Jun 9, 2014, at 9:28 PM, Dave Movius wrote: > > TOM, > > I use Astron 35 amp linear power supply with heat si

Re: [Flexradio] preamp upgrade on 3000

Dale, What is the revision level of the TRX board in the HW menu of the setup menus? 73, Dudley WA5QPZ Sent from my iPhone > On May 22, 2014, at 6:42 PM, w...@reagan.com wrote: > > Bought a 3000 the sn# is 2009-0147, I would assume unless it had been sent > back the preamp has never b

Re: [Flexradio] Audio distortion

Dave, You are taking resources from servicing the FW or USB driver, max delay is 4000us without causing issues. Make sure you Windows Power Options is set to High Performance, if using wireless , disable that and try a hardwired NIC instead. 73, Dudley WA5QPZ Sent from my iPhone > On A

Re: [Flexradio] Noise Reduction??

Guys, Rather than use the NR, I use the AGC-t gain, much more effective than any NR. The AGC-T control should be your most used control. Now if you are having pulse noises, NB is more effective. 73, Dudley WA5QPZ Sent from my iPhone > On Apr 11, 2014, at 10:54 AM, Olaf Nurmepuu wrot

Re: [Flexradio] Flex 1500 and Ameritron ALS-500M amp

Travis, You should not need a isolator with the ALS500, but measure it instead , should not be more than 50 volts at 100 ma. check it to be sure. BTW - warning! The FlexWire connector is NOT a Serial connection, if you connect a serial cable to that connector you can cause serious dama

Re: [Flexradio] HRD Logbook Radio Pane display for Flex 5000 - two receivers.

Keith, I think that you need to go back to HRD on how they handle two separate receivers. 73, Dudley WA5QPZ Sent from my iPhone > On Apr 6, 2014, at 9:20 AM, Keith Goobie wrote: > > Good day all ­ looking for observations and guidance. > > Scaenario - Have a Flex5000a two receivers + DD

Re: [Flexradio] ATU and power meter problem

Rick, The HF output bridges work normally, there no RF measurement of the the VHF/UHF module. There are two bridges in the 5000 with the ATU , one is mounted on the ATU itself and the one reporting in PowerSDR , forward and reverse in the TX Metering. If the ATU is not reporting in the

Re: [Flexradio] sdr 1000 +delta44 +Vista

The SDR1000 will only run on 32 bit Vista not 64. Due to lack of 64 bit parallel driver . 73, Dudley WA5QPZ Sent from my iPhone On Apr 20, 2013, at 9:27 AM, GOVR Radio wrote: > I have recently had to retire my XP pc and tried to resurrect the 1000 on > Vista > I have got the m audio new dr

Re: [Flexradio] 64-bit driver PowerSDR 2.6.4

PowerSDR 2.6.4. Works on Win8 /64 just fine here. 73, Dudley WA5QPZ Sent from my iPhone On Apr 15, 2013, at 11:17 PM, Ulf Holt wrote: > I tried to upgrade PowerSDR on my computer running Windows 8, but could not > connect to my Flex-5000A after the upgrade. I opened a service ticket and wa

Re: [Flexradio] TX filter width?

Steve, I think the minimum is 10 hz wide. 73, Dudley WA5QPZ On 03/22/2012 08:26 PM, Steven Hess wrote: I am trying to define a TX filter and the Transmit Form keeps resetting my lower value to 1459 from the value I am trying to set every time I go to save the profile. What is up with that? W

Re: [Flexradio] PSDR v2.3.5

Dan , Have you rebooted since? Sounds like .NET missed something. 73, Dudley WA5QPZ Sent from my iPhone On Mar 9, 2012, at 7:12 PM, "K0DAN" wrote: > Radio is a F5K+RX2+ATU on WIN7 Ultimate/x64. > > I just installed PSDR v2.3.5 and customized my database. > > Started playing around and

Re: [Flexradio] [FlexEdge] PowerSDR v2.3.5 - Some new feature info

Jim, Some of what you are asking is already there, but one for sure is a Windows issue and not something that Flex can correct, keeping the mouse focused on the Frequency, this is a MS issue.. There are several ways to try to get around it, and there is a Wiki article about this too.

Re: [Flexradio] New Flex 3000 Owner

Michael, Windows tends to shutdown devices not being used, and slow processors down. If you go to Windows Control panel, then to Power Options, set for "High Performance" .. Disable any screen savers.. Try this, it helps on some Win7 and Vista systems. -- 73, Dudley WA5QPZ On

Re: [Flexradio] Recording and playing back a frequency spectrum

John, Your question is just a little vague as to what you are needing to do.. I presume that you are wanting to record the incoming I/Q to a wave file.. Go to the Wave Menu at the top of PowerSDR, Open the "Options" in the upper left corner of the Wave Menu Make sure the buttons have "Pre-Pro

Re: [Flexradio] It was a fine day today, until...

Ralph, Are you closing PowerSDR before turning the radio off? The memory.xml file is held open until PowerSDR is closed, and PowerSDR may not close if communications to the radio is lost.. When this happens, the memory.xml and the database.xml may not write back correctly. So alway

Re: [Flexradio] changing default wav file location

Tom, The location of the either the Quick Record or Wave Record are hard coded to the AppData folder location, same folder that has your radio database in it..You will need to record it and then move to your preferred drive. 73, Dudley WA5QPZ On 12/31/2011 5:59 PM, MILLER, Tom wrote:

Re: [Flexradio] LOSS OF AUDIO

Leon, Is this just on one particular band? RF in the shack? Might be RF getting into the digital stream somewhere. Start with some ferrities on the FireWire cable. 73, Dudley On Saturday, December 17, 2011, Leon Bishop wrote: > I am having a problem with losing audio after transmitting. I

Re: [Flexradio] New PowerSDR Install fails

Also reset the database. Since you can't get to the setup menu to set the "factory Defaults". Hold the LEft Shift key and click PowerSDR , then at the "Radio Chooser" menu again hold the left shift key and click your radio use button, this should reset the database for you. 73, Dudley On Tuesda

Re: [Flexradio] Full duplex and satellite operation

Nils, Use the RX tab in setup for unmutting rx2 73, Dudley WA5QPZ Sent from my iPhone On Dec 5, 2011, at 3:18 AM, "Liaaen Nils J." wrote: > I have just started trying satellite operation and have a problem and a > question: > > 1. The receiver mutes while I transmit > 2. How is the USB/LS

Re: [Flexradio] FlexControl install fail

Larry, You will find the FlexControl drivers in the PowerSDR install folder.. Just open Windows Device manager, find the unknown USB device, Right click and update driver, Browse to the C:\Program Files (x86)\FlexRadio Systems\PowerSDR v2.2.3\FlexControlI64folder, for the 64bit versi

Re: [Flexradio] Did I break my radio? (Part 2)

Dave, Is it that you don't have enough TX gain?What mode are you in, SSB, Digital?Make sure your power supply is working correctly, check the internal voltage with the ctrl - shift - i. If it doesn't straighten out, go to the Help Desk link of FlexRadio.. You can turn in

Re: [Flexradio] Receiver randomly scans

Al, What kind of microphone did you have connected? 73, Dudley WA5QPZ On 7/28/2011 9:22 PM, Al Waller K3TKJ wrote: This is something I probably am doing wrong. Ever so often my tuning just starts going up the band. I don't see any pattern as to what causes it. Tapping the TX on stops it and

Re: [Flexradio] 2.1.5 was working - fatal error now

Zack, Might be the memory.xml file is bad...Go to Windows Run , type %AppData%and click Run.. This should take you to your Appdata folder, then select the FlexRadio Systems folder. In that folder there is a memory.xml and a master.xml file.Rename the Memory file to

Re: [Flexradio] Reducing Latency

Ted, If you are running Win7 or Vista, make sure to have the Windows Power Option set to High Performance.. Also Win7 seems to handle the I/O better, the FlexRadio FW driver should be able to run in Normal mode.Be sure to disable Bluetooth and Wireless in the Windows Device manager sh

Re: [Flexradio] VAC problems?

Dave, Did you follow the instructions on VAC from the Knowledge Center or from the FlexRadioWiki.com pages? You will need to purchase VAC, and be sure to get the 4.09 version instead of the 4.10 version which is their current version.. 73, Dudley WA5QPZ On 7/21/2011 4:55 PM, Dave C

Re: [Flexradio] Low (no) output

Dave, Don't beat yourself up too much, I think that we all have done something like that at one time or another.. Bet you won't do it again!! 73, Dudley WA5QPZ On 7/19/2011 9:25 PM, Dave Gomberg wrote: Watch big dope slap I was thinking after the mention of ground failure that f

Re: [Flexradio] vhf deaf & no talk

Leo, You need your VHF antenna connected to the VHF -144 port. When you engage the Vhf/Uhf modules, there are separate antennas for each, you should see who is connected to who on the far side above the clock.. HF only uses the Ant 1-3 73, Dudley WA5QPZ On 7/19/2011 3:25 PM, Leo H

Re: [Flexradio] frequency

V or generator frequency and click Start.. Wait a few seconds for the Finished message.. That's it.. 73, Dudley On 7/14/2011 8:30 PM, Guy Harris wrote: Just how does one check the frequency calibration on a F5k? TIA, ~~Guy W6NJX On 7/14/2011 5:45 PM, Dudley Hurry wrote: Kevin,

Re: [Flexradio] frequency

Kevin, Make sure that you have followed the frequency calibration for your radio.. then check your radio.. If you must, you can offset the DDS , but that will effect the other frequencies severely. 73, Dudley WA5QPZ On 7/14/2011 10:03 AM, Kevin Hobbs wrote: Hi I always find that I

Re: [Flexradio] v.2.0.22 startup problems

Rod, Are earlier versions running ok? Reason I ask, you are below the minimum CPU to run PowerSDR, not that it can't work, but it is going to be pretty marginal . If previous versions were 2.x versions, try holding the left shift key, while double clicking PowerSDR, this should bri

Re: [Flexradio] Voice keyer through PSDR truncates end of audio on output, progressive worsening

Matt and others, I have read all in the thread, my one addition is that I noticed that you are running VAC 4.10. There were and has been timing and buffering issues that degrade over time with the 4.10 version.. You might want to try the 4.09 version instead, and you will need the signed ver

Re: [Flexradio] flex 1500 setup problem

Don, What version of DDUtil are you using? 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: dud...@flexradio.com Web: www.flexradio.com https://www.crossloop.com/FlexRadioSupport?type=email"; target="_blank">https://www.crossloop.com/images/

Re: [Flexradio] No transmit audio on PSDR 2.0.22

Matt, As Neil said, be sure to check the Mixer menu and that the Mic is checked.. Then move the TX meter to Mic, this will be the first mic audio stage, and increase you Mic Gain, most Mic will need at least 20 on the mic gain.. As some else said, if you are using a computer type of mic, m

Re: [Flexradio] good low cost firewire card for a tower computer running XP

Bruce, I have had good luck with this one , for PCI.. http://www.lacie.com/us/products/product.htm?id=10332 or This one http://www.newegg.com/Product/Product.aspx?Item=N82E16815118005&cm_re=firewire_card-_-15-118-005-_-Product For PCIe http://www.newegg.com/Product/Product.aspx?Item=N82E168

Re: [Flexradio] Strange issues with 5K

Jack, Sounds like you need to re-run the Receiver Image Test in the Production menu..Most of the time when first loading 2.0.22, it will run the Image test first thing, but does not tell you that you must remove the antennas.. So do this to re-run the test. Good to start with a reset on

Re: [Flexradio] Starting FlexControl

Ron, Go to Windows Device manager, to your Ports (Com & LPT) then to FlexControl USB Control Knob (Com4) then to Port Settings Look for Advanced Change the "Com Port number" to an unused port. This should fix you up.. And with two PSDR windows, the control will attach to the first one up.

Re: [Flexradio] Digital audio problems

.. 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: dud...@flexradio.com Web: www.flexradio.com <http://www.flex-radio.com> http://www.crossloop.com/FlexRadioSupport?type=email"; target="_blank">http://www.crossloop.com/images/badge-sm-gray.jpg"; al

Re: [Flexradio] Fw: DDutil error

o.com <http://www.flex-radio.com> http://www.crossloop.com/FlexRadioSupport?type=email"; target="_blank">http://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/> On Mon, May 30, 2011 at 9:27 PM, Chuck ONeal wrote: > Hi

Re: [Flexradio] flex5000

...@flexradio.com Web: www.flexradio.com <http://www.flex-radio.com> http://www.crossloop.com/FlexRadioSupport?type=email"; target="_blank">http://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/> On Thu, May 26, 2011 at 7:

Re: [Flexradio] [FlexEdge] Suddenly, I have a problem

target="_blank">http://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/> On Mon, May 23, 2011 at 10:20 AM, William H. Fite wrote: > I've long felt smug as I've read the various issues that people have had > wi

Re: [Flexradio] [FlexEdge] Screaming video

jpg"; alt="Get help from Dudley Hurry!"/> On Fri, May 20, 2011 at 12:17 PM, Christopher D. Sanger < cdsan...@psych.udel.edu> wrote: > Sorry for maybe a dumb question . > Is there access to antennas at Dayton, are the Flex Radios 'on the air' ? >

Re: [Flexradio] Seeing images of strong CW signals

, Option 2 Email: dud...@flexradio.com Web: www.flexradio.com <http://www.flex-radio.com> http://www.crossloop.com/FlexRadioSupport?type=email"; target="_blank">http://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/> O

Re: [Flexradio] Receivers Dead on New 5K

jpg"; alt="Get help from Dudley Hurry!"/> On Sun, Apr 17, 2011 at 4:27 PM, John Seney wrote: > Flex 5000A New - w/ RX2 - worked great for about 5 days and then... > > Receivers dead - tried different ANT inputs, reboots, new PowerSDR Software > - nothing. > Get st

Re: [Flexradio] Audio Distortion

ot;; target="_blank">http://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/> On Wed, Apr 13, 2011 at 9:32 PM, Jerry Flanders wrote: > IIRC, the recent CW changes were made to the firmware inside the FLEX > radios. The SDR-1000 has

Re: [Flexradio] Fwd Pwr

ttp://www.flex-radio.com> http://www.crossloop.com/FlexRadioSupport?type=email"; target="_blank">http://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/> On Wed, Apr 13, 2011 at 4:30 PM, Steven L Hess wrote: > PowerSDR v2.0.

Re: [Flexradio] Flex Operating Manuals

loop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/> On Thu, Apr 14, 2011 at 1:58 PM, wrote: > Since I've received several requests already, the high quality/high > resolution color laser printed Version 2.0 draft operating manuals for > the Flex

Re: [Flexradio] 2.0.22 Fatal Error / FLEX-1500

ossloop.com/FlexRadioSupport?type=email"; target="_blank">http://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/> On Mon, Apr 11, 2011 at 6:49 PM, Greg Zenger [N2GZ] wrote: > Still nothing. > > I have repair installed. I have

Re: [Flexradio] 2.0.22 Fatal Error / FLEX-1500

http://www.crossloop.com/FlexRadioSupport?type=email"; target="_blank">http://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/> On Mon, Apr 11, 2011 at 4:22 PM, Greg Zenger [N2GZ] wrote: > Still not working. > > The s

Re: [Flexradio] 2.0.22 Fatal Error / FLEX-1500

.. 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: dud...@flexradio.com Web: www.flexradio.com <http://www.flex-radio.com> http://www.crossloop.com/FlexRadioSupport?type=email"; target="_blank">http://www.crossloop.com/images/badge-sm-gray.jpg&quo

Re: [Flexradio] Loud Tone When Transmitting

: www.flexradio.com <http://www.flex-radio.com> http://www.crossloop.com/FlexRadioSupport?type=email"; target="_blank">http://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/> On Fri, Apr 8, 2011 at 10:25 PM, Gedas wrote:

Re: [Flexradio] v2,0.22 and v20.20rc problems

loop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/> On Thu, Apr 7, 2011 at 6:12 PM, Art Holmes wrote: > I have been running v20.20rc with no problems. Loaded v20.22. hf seemed > fine,switched to external 144 xvrtr. I t worked ok. Went back to hf and no >

Re: [Flexradio] Flex-3000 NO RF detected

;>http://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/> On Mon, Mar 28, 2011 at 10:57 PM, Hugo Martinez wrote: > Hi !! > > > Recently I bought the SB-200 amp and ask for help to key the amp with my > flex-3000,I receive a few

Re: [Flexradio] More news .......

http://www.crossloop.com/FlexRadioSupport?type=email"; target="_blank">http://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/> On Sun, Mar 6, 2011 at 10:56 AM, George Osier wrote: > Flex 1500 and running .19 here .. When I insert t

Re: [Flexradio] [FlexEdge] FLEX-5000 160m CW spur ECO

op.com/FlexRadioSupport?type=email"; target="_blank">http://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/> On Tue, Mar 1, 2011 at 1:29 PM, Alan NV8A wrote: > Thanks for the reply, Dudley. > > No HTRX entry, but there

Re: [Flexradio] [FlexEdge] FLEX-5000 160m CW spur ECO

op.com/FlexRadioSupport?type=email"; target="_blank">http://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/> On Tue, Mar 1, 2011 at 12:32 PM, Alan NV8A wrote: > On 03/01/11 12:06 pm, Gerald Youngblood wrote: > >&g

Re: [Flexradio] Reverse Polarity Flex 1500

/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/> On Fri, Feb 18, 2011 at 12:13 PM, Les Rayburn wrote: > I loaned out my Flex 1500 along with a 222 transverter to a friend who > wanted to experiment with the set up at his home for a few days. He called > me and sa

Re: [Flexradio] RX and Tx Profiles

2 Email: dud...@flexradio.com Web: www.flexradio.com <http://www.flex-radio.com> http://www.crossloop.com/FlexRadioSupport?type=email"; target="_blank">http://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/> On Tue, J

Re: [Flexradio] Flex SDR Video Screen Capture WITH Audio

: dud...@flexradio.com Web: www.flexradio.com <http://www.flex-radio.com> http://www.crossloop.com/FlexRadioSupport?type=email"; target="_blank">http://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/> On Mon, Jan 24, 2011 at 7:34 PM, Jo

Re: [Flexradio] missing driver flex1500

Rick, Be sure to follow the instructions in the 1500 Driver Troubleshooting Guide, *http://support.flex-radio.com/Downloads.aspx?id=356* but I think that you need to run the customFlex1500DLL.bat file. This should install the newer dll that should help the i series USB controller recognize

Re: [Flexradio] Touch Switch

Mardy, Neil maybe right, try the common mode choke, also if you have a RF Field strength meter, make sure that there is no RF in the shack using the meter. Outside of that, trade the monitor to a friend for his with a normal push button power switch. Last year there was another ham that ha

Re: [Flexradio] fldigi test message sites?

> > Thanks. It has good sounds, but no images (at least as far as I can > see). > > Rick Bischoff (K7ET) suggested > http://www.nonstopsystems.com/radio/radio-sounds.html , which has both > good images and good sounds. > > Gary > WG1I > > > On 1/5/2011 4:53 PM, F

Re: [Flexradio] fldigi test message sites?

Gary, Go to this site, for WB8NUT. He has quite a few.. http://www.wb8nut.com/digital.html 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: dud...@flexradio.com Web: www.flexradio.com "Tune in excitement!" ™ On Wed, Jan 5, 2011 at 12:59 P

Re: [Flexradio] New Software for ShuttlePro/PowerSDR integration under development...

Bradley, On the focus issue, there is a Windows option to have what ever window is under the cursor to have the focus automatically. Many use that. Also there is a program called HotWheel that can keep the focus on PowerSDR. http://kc.flex-radio.com/KnowledgebaseArticle50156.aspx These opti

Re: [Flexradio] Plasma TV RF noise

Gary, Contact Pioneer directly with your model number. I understand that they have a kit to help that.But you may not get rid of it all until the set is replaced. Plasma TVs are real noise generators.. 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: dud...@flexradio

Re: [Flexradio] Problem with the function Wave

Claudio, Welcome to the FlexRadio Reflector and glad that you have the radio working for you.. There are two ways to record what you are hearing, the fastest way is using the Quick Record/Playback feature on the main console, this is intended to be played back over the air, is Post Processed

Re: [Flexradio] Transmit Audio Distortion

Jim, I was wondering what kind of audio distortion you were getting reports of? One thing about the PR40 and just about all Heil microphones is that you should not get any closer than 4 inches to the mic, or 6 inches if you have a big booming voice, the lows will get so muffled that it will soun

Re: [Flexradio] Flex 1500 Headphone / Speaker Jack

Tom, On the 1500 you can connect the phones between tip and ring, leave the ground open, this will give you mono output. 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: dud...@flexradio.com Web: www.flexradio.com "Tune in excitement!" ™ On

Re: [Flexradio] RF Feedback follow up info

David, To add to what Tim said, there is a way to test if the RF is coming in through the mic circuit or into the digital side in the computer. The dummy load will let you know if the RF is radiated or internal, but also if you do a Quick record of someone over the air, and then play it back

Re: [Flexradio] Flex Site down?

Don, It's working here, if you still can not get it to load, be sure to clear your Cookies Cache.. 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: dud...@flexradio.com Web: www.flexradio.com "Tune in excitement!" ™ On Thu, Dec 30, 2010 at

Re: [Flexradio] Question about Panafall display color selection

You can also adjust the Waterfall sensitivity in the Setup menu => Display tab "Waterfall" then adjust the Low Level.This will change the overall sensitivity for the waterfall screen in the panadapter. 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: dud...@flexradio

Re: [Flexradio] Newby Flex1500 CW question

Rick, I agree with Neil, I think that you are running out of graphics and suffering from low L2 cache also.. You most likely noticed a drop in the CPU usage also when the panadapter was stopped.Another indication that the graphics is alittle on the short side.CW is very demanding, and

Re: [Flexradio] BSOD

Dan, Did you read the How to Use. part of their site? http://www.nirsoft.net/utils/blue_screen_view.html Give you some additional details on how to read the data. If you are getting a IDE/ATAPI error, I would look to see if you are sharing your FW controller IRQ with the SATA controller. T

Re: [Flexradio] support

Jim, I don't think so, but we can by appointment. 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: dud...@flexradio.com Web: www.flexradio.com "Tune in excitement!" ™ On Fri, Dec 24, 2010 at 11:35 AM, jim wrote: > Are there any other ham

Re: [Flexradio] Flex+PC all in one

Mike, I think that not only the RF issue to consider, but that the cooling could be an issue also..I think that you would be better off with the Flex 5000 setting on top of the Mac Mini.. 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: dud...@flexradio.com Web: www.fl

Re: [Flexradio] Flex+PC all in one

Justin, It was quite a challenge, the big challenge for Gerald and Ken was to get the computer EMT low enough to get the radio qualified.As Gerald said, the FCC will allow more radiation out of a computer than with a radio. Put a computer in the same box with a radio, it must qualify as a

Re: [Flexradio] Can I Save Transmit Equalizer settings?

Gary, The EQ settings are saved as part of the Transmit Profile.Open the Transmit tab in Setup menu, then once you have all the settings you want to save, TX Drive level, Mic gain, etc, then select Save, then you have the opportunity to save the TX settings under the same name or giv

Re: [Flexradio] FLEX-1500

Carter, We'll take this direct to save the reflector bandwidth.. 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: dud...@flexradio.com Web: www.flexradio.com "Tune in excitement!" ™ On Tue, Dec 14, 2010 at 4:00 PM, Carter Craigie wrote: > Hi

Re: [Flexradio] FLEX-1500

Carter, If you want to stay with 2.0.8, be sure to check your Windows Default sound settings.. Plug and Pray (Play) has a habit of assigning the last sound driver to your default Windows sounds. With the 2.0.16 version, the sound card conflicts will go away. And as Tim suggested, you will n

Re: [Flexradio] Running VAC

Tom, I've been watching the thread on your MixW experience. It's really quite simple, but each digital program sets up slightly different. Most folks more issues with DM780 and not MixW. There are only two major pieces to making the digital programs work, VAC (virtual audio cable) and a v

  1   2   3   4   5   6   7   8   9   10   >