The specs are on the FLEX-1500 Product web page
(http://www.flexradio.com/amateur-products/flex-series/flex-1500/)
Transverter IF Output Power: +0dBm Typical, +5 dBm max.
Tim Ellison, W4TME
Customer Experience Manager
FlexRadio Systems™
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-5
Hi All
The manual says "the output level equals 0 dBm with a setting of 30".
Ok fine
As I don't have a milliwattmeter, what is the max available out of
that port? Surely not 5 watts?
Ken
--
President and CTO - A
I have a Flex - 1500 for sale for $550.00 ship Continental US. Works great!!
Looking to upgrade.
Radio, USB and power cables.
Thanks and 73,
Sonny,KE9IX
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.
vk3...@dcsi.net.au, FlexRadio@flex-radio.biz Subject:
Re: [Flexradio] flex 1500
Hello David.
I have to agree with you. One of the few things that intrigues me even more
are the people who feel compelled to reply to such questions who either have
not read the question correctly, or have no experience in
FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] flex 1500
I am continually intrigued by the inane questions being asked on this forum
by people who surely must have a few brains otherwise they would not have
ham licences. There is a 150 page manual out there. Read it first, then if
something is
I am continually intrigued by the inane questions being asked on this
forum by people who surely must have a few brains otherwise they would
not have ham licences. There is a 150 page manual out there. Read it
first, then if something is not clear, ask your question.
_
will cost you as
> much or more than a dedicated 2m FM rig and won't be nearly as convenient.
>
> Mike / W8DN
>
> On 4/27/2015 3:55 PM, geo...@gloria.us wrote:
>
>> transverters from Elecraft or DownEast microwave
>>
>> - Original Message - S
ers from Elecraft or DownEast microwave
- Original Message - Subject: [Flexradio] flex 1500
From: "Bill and Sue"
Date: 4/27/15 11:51 am
To: FlexRadio@flex-radio.biz
Hi folks
I may have asked this before but I am going to ask again. The Flex 1500, can
it be used on 2 meter
transverters from Elecraft or DownEast microwave
- Original Message - Subject: [Flexradio] flex 1500
From: "Bill and Sue"
Date: 4/27/15 11:51 am
To: FlexRadio@flex-radio.biz
Hi folks
I may have asked this before but I am going to ask again. The Flex 1500, can
it
...@flex-radio.biz] On Behalf Of Bill
and Sue
Sent: Monday, April 27, 2015 10:51 AM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] flex 1500
Hi folks
I may have asked this before but I am going to ask again. The Flex 1500,
can it be used on 2 meter repeaters??? Simplex??If the answer is
Hi folks
I may have asked this before but I am going to ask again. The Flex 1500, can
it be used on 2 meter repeaters??? Simplex??If the answer is yes where to
I buy the transverter and an amplifier that will work on 2 meters.
Thanks
Bill
ope...@rcn.com
___
Keith,
In addition to the Reflector, I recommend that you query the Community
(https://community.flexradio.com/flexradio) for info on your issue.
There are a lot of users there who have gone through the trials and
tribulations of getting third-party digital mode applications properly
configu
Hi all, once again I need your help in configuring WSPR using my flex 1500
the program receives OK but I cannot get the flex to go into TX!
Can someone explain if I need to sett up a PTT port to TX or do I use the cat
control to put the flex into TX or do I need to configure both the PTT and CAT
Please submit a support ticket via our HelpDesk
(http://helpdesk.flexradio.com) so we can assign you a case number. For
details on how to submit a HelpDesk support ticket, please refer to the
following URL:
http://helpdesk.flexradio.com/hc/en-us/articles/202118688-How-to-Submit-a-Request-for-T
I have run a Flex 1500 on a Microsoft Surface tablet-earliest version running
Windows 8. I have run it on two different MACs using Windows 8 and 8.1 under
Bootcamp. Had no problems other than fonts on tablet were too small for tired
old eyes.
73 de K7BAW
Barry Winters
k7...@barrywinters.me
n
> To: "FlexRadio@flex-radio.biz"
> Subject: [Flexradio] flex 1500 minideluxe and ddutil
> Message-ID:
> Content-Type: text/plain; charset=us-ascii
>
>
> I am returning to sdr after a few years and have to admit that I have
> forgotten much of what I on
I am returning to sdr after a few years and have to admit that I have forgotten
much of what I once knew. I would be grateful if some one could point the way
to a guide on how to set up minideluxe and ddutil on the 1500, Regards Morrice
___
FlexRadio
All the more reason why I want the flash! :)
Eddie from the BronxAB2VW
> From: w...@comcast.net
> To: edwin_mar...@hotmail.com; nn3...@san.rr.com; k.alexan...@rogers.com;
> r...@earthlink.net; flexradio@flex-radio.biz
> Subject: Re: [Flexradio] Flex 1500 For Sale With Mars Flash
>
thlink.net ; flexRadio@flex-radio.biz
Subject: Re: [Flexradio] Flex 1500 For Sale With Mars Flash
Mars is chicken feed! I'm sending in my radio for the Pluto flash!
Eddie from the BronxAB2VW
From: nn3...@san.rr.com
To: k.alexan...@rogers.com; edwin_mar...@hotmail.com; r...@earthlink.net;
Mars is chicken feed! I'm sending in my radio for the Pluto flash!
Eddie from the BronxAB2VW
> From: nn3...@san.rr.com
> To: k.alexan...@rogers.com; edwin_mar...@hotmail.com; r...@earthlink.net;
> flexradio@flex-radio.biz
> Subject: RE: [Flexradio] Flex 1500 For Sale With Mars
tware to flash the radio.
Eddie from the Bronx
AB2VW
> Date: Wed, 13 Aug 2014 12:57:14 -0700
> From: k.alexan...@rogers.com
> To: r...@earthlink.net; flexradio@flex-radio.biz
> Subject: Re: [Flexradio] Flex 1500 For Sale With Mars Flash
>
> "Mars flashed"? Wha
com
> To: r...@earthlink.net; flexradio@flex-radio.biz
> Subject: Re: [Flexradio] Flex 1500 For Sale With Mars Flash
>
> "Mars flashed"? Whaddat?
>
> 73,
>
> Ken Alexander
> VE3HLS
>
>
>
> On Wednesday, August 13, 2014 9:49:41 AM, ric5 wrote:
&g
"Mars flashed"? Whaddat?
73,
Ken Alexander
VE3HLS
On Wednesday, August 13, 2014 9:49:41 AM, ric5 wrote:
I have owned this Flex 1500 for 5 years. Has been back to factory for
upgrade, and Mars flashed.
Unit has some wear on case from stacking. On a scale of 1>10 Its a 9 for
sure. Unit h
I have owned this Flex 1500 for 5 years. Has been back to factory for
upgrade, and Mars flashed.
Unit has some wear on case from stacking. On a scale of 1>10 Its a 9 for
sure. Unit has no problems I'm aware of. Used on digital modes mostly.
Reason I'm selling I have a used 3000 now. Comes with po
Unit was purchased Dec 2010. Has had very little use since then. Xmit only
a few times. Just not my cup 'o tea.
Unit is excellent condition. Non smoking household.
Asking $550 + shipping
Thanks
--
Dan Ziolkowski KC2STA
SKCC #4290T
30MDG #1250
Ubuntu LINUX
Flex 1500 Good condition from smoke free household, with original box,
software, power cord, USB cable, Kenwood KMC-9 deskmike and antenna adapter.
$550 shipped in US
When a strong man, fully armed, guards his own house, his possessions are safe.
Luke 11:21
___
I have decided to put my 1500 up for sale and move on to something
else. Its in mint condition and comes with original box and all
cables. I am not a smoker and there is no smoking in the shack but
there is a smoker in the house (unfortunately) so I can't say it's
totally from a non smoker en
Travis,
You should not need a isolator with the ALS500, but measure it instead ,
should not be more than 50 volts at 100 ma. check it to be sure.
BTW - warning! The FlexWire connector is NOT a Serial connection, if you
connect a serial cable to that connector you can cause serious dama
Would I need a buffer circuit between the Flex and the 500M or just a Serial
cable with the appropriate wires connected to an RCA connector?
TravisK5HTB
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
h
Would be nice to grey out the SWR selection when the Flex 1500 is being used.
> From: k9...@rnacs.com
> To: dan.ziolkow...@gmail.com; n...@n4rp.com
> Date: Thu, 10 Apr 2014 14:53:43 -0400
> CC: FlexRadio@flex-radio.biz
> Subject: Re: [Flexradio] Flex-1500/PowerSDR 2.7.2 prob
Ross,
The FLEX-1500 does not have the necessary hardware to measure reflected
power. Therefore the "Ref Pwr" & "SWR" settings are not functional if you
are using a FLEX-1500.
The PowerSDR software is not only used with the FLEX-1500, but also with the
FLX-3000 & FLEX-5000 radios. The reflected
Ross-
I have a 1500, it does not have a built in SWR meter. You will need to
supply an external unit.
DAN KC2STA
On Thu, Apr 10, 2014 at 1:17 PM, Ross Primrose wrote:
> Just picked up a used Flex-1500. I'm using a remote automatic antenna
> tuner, so knowing the SWR seen by the radio is fairly
Just picked up a used Flex-1500. I'm using a remote automatic antenna
tuner, so knowing the SWR seen by the radio is fairly important so I can
tell that the tuner is functioning properly. Setup->Transmit->Tune->TX
Meter gives a selection for SWR, but it doesn't seem to actually do
anything. Set
Does the problem occur after transmitting?
- Original Message - Subject: [Flexradio] FLex-1500 ...loss of
audio
From: "Ray Bahm"
Date: 4/2/14 8:36 pm
To: FlexRadio@flex-radio.biz
I have a similar problem ...
Often when I turn-on my 1500 the audio output from the p
I have a similar problem ...
Often when I turn-on my 1500 the audio output from the phones jack on the front
of the 1500 is silent. THe audio shows on the screen ok.
I’ve only once had the audio turn-on and then quit after about 3 seconds.
The only fix I’ve found is to turn everything off, inclu
For sale is a FLEX-1500. Sold with original box. Asking $575 shipped to USA.
Condition is like new. Smoke free home, original owner. USB and power
cables are included.
Optional accessories: Heil microphone cable adapter $15; Yaesu MH31
microphone $30. (microphone and cable will not be sold sepa
Oops, disregard my question about unit of measure! I sent it before reading a
few emails down. Sorry about wasting BW. Bob
Sent from my iPhone
On Jan 22, 2014, at 9:56 PM, Michael Babineau wrote:
As it turns out, the source I found on the internet for “Dit duration” was
inaccurate so my
q
What is the unit of measure? Milliseconds? Maybe a dumb question bit I don't
know. Thanks. Bob
Sent from my iPhone
On Jan 22, 2014, at 9:56 PM, Michael Babineau wrote:
As it turns out, the source I found on the internet for “Dit duration” was
inaccurate so my
quick and dirty calculations
As it turns out, the source I found on the internet for “Dit duration” was
inaccurate so my
quick and dirty calculations were out by a factor of ten.
What I know know is the correct formula for calculating a “Dit duration” is
1200/WPM (this is just the
on-time, not including the trailing inter
I just recently acquired a Tokyo Hy-Power HL45B for use with my Flex-1500. I
also have an interface cable to
allow me to key the amp from the Flexwire I/O connector on the rear of the rig.
>From what I have read, Tokyo Hy-Power recommends using a TX Out Delay of 10MS
>after keying the Amplifier
ight until you hear them speak.
- Original Message -
From: Ian Baines
To: flexra...@yahoogroups.com
Sent: Tuesday, January 14, 2014 11:42 AM
Subject: [FlexRadio] Flex 1500 with a long wire antenna
I did a comparison of my Flex 1500 against an R75 receiver using a long wi
Have a flex 1500,as new,sn#2713-3083. comes with every thing as shipped
by flex from the factory,never any smoke. want to move up to a 3000.1500 work
perfect on latest power sdr.
Asking 525. shipped . will do pay pal or USPS MO.
73
dale wt4t
__
For sale is a FLEX-1500. Sold with original box. Asking $600 shipped to USA.
Condition is like new. Smoke free home, original owner. USB and power
cables are included.
Optional accessories: Heil microphone cable adapter $15; Yaesu MH31
microphone $30. (microphone and cable will not be sold sepa
Hi Bob-- I'm not sure anyone answered your sidetone volume problem.
Simple-- the main audio slider (upper corner area) switches to being the
sidetone/monitor audio level slider when you key down. So hold a long
key down and adjust the slider using mouse with the other hand hi hi.
Works in both
Bob (GM4CAQ) wrote :
>and no audio level control on the sidetone!.
Bob .. the sidetone level (same as Monitor level for SSB .. useful when using a
double-sided headset) can be modified in
two different ways.
If you got to SETUP/Transmit You will see something labelled "Monitor TX
AF" t
>2) On CW it's the latency thing.. horrible noticeable delay between key
>down and sidetone.. and no audio level control on the sidetone!.. Just not
>nice.. never had this latency before on any analogue rig I have owned.
>Someone said its been fixed.. either I have not set it up properly or th
Tim,
You are still the man! Still helping us non- 6000 users on the blog.
Have a great weekend.
From: Matthew-KJ4TN with a Flex-3000 (non 6000 series of Flex) hi.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.bi
Based on the description of your issue, I recommend you submit a support
ticket via our HelpDesk (http://helpdesk.flexradio.com) so we can assign
you a case number and investigate it further. For details on how to
submit a HelpDesk support ticket, please refer to the following URL:
http://supp
Hi folks,
I am a Flex newbie and really enjoying the receive experience.. absolutely
fantastic the point and shoot feature. I never thought I would prefer this
interface to a rotary dial until I tried it.
Struggling on transmit though.
Few problems..
1) On SSB .. I have made two
Does anyone know what they are?
We seem to have a 1500 with no power out.
Mike va3mw
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/f
A Wise man once said nothing.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.f
You always learn good things from Neal!
Lee K9WRU
- Original Message -
From: "Neal Campbell"
To: "'Jerry'" ; "'Steve Sterling'"
; "'Flex-Radio E-Mail Reflector'"
Sent: Friday, October 18, 2013 6:03 PM
Subje
You do know that Graham works for Flex, don't you?
73
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jerry
Sent: Friday, October 18, 2013 7:25 PM
To: Steve Sterling; Flex-Radio E-Mail Reflector
Subject: Re: [Flexradio] Flex-1500 Overdrivi
Well said Steve. I don't think anyone at Flex is paying any attention
to the post any more
On 10/18/2013 7:01 PM, Steve Sterling wrote:
When I set up my Flex on psk31, etc. there was a writeup on the
knowledge base or wiki on how to set up for digital modes. Key point
was that you left the "dr
When I set up my Flex on psk31, etc. there was a writeup on the
knowledge base or wiki on how to set up for digital modes. Key point was
that you left the "drive" at 100% and LOWERED the VAC to no more than
-6db, never as high as 0db. As explained, 0 db on the ALC was where the
digital audio ch
To: "ric5"
Cc: "Graham Haddock" ;
Sent: Friday, October 18, 2013 6:02 PM
Subject: Re: [Flexradio] Flex-1500 Overdriving in Some Bands
Sorry. Fat fingers. Version 2.6.4 allows different settings for
different functions. Check your settings across bands and see if, band by
wrote:
Not had any complains on my end. I have had my Flex-1500 for about 3 years now.
I do a lot QRP digital woke, lately a lot ALE .
Rick Kd4jrx FM14
--
From: "Mark Griffith"
Sent: Friday, October 18, 2013 1:59 PM
To: "Graham
t 3 years now.
I do a lot QRP digital woke, lately a lot ALE .
Rick Kd4jrx FM14
--
From: "Mark Griffith"
Sent: Friday, October 18, 2013 1:59 PM
To: "Graham Haddock"
Cc:
Subject: Re: [Flexradio] Flex-1500 Overdriving in So
"
Cc:
Subject: Re: [Flexradio] Flex-1500 Overdriving in Some Bands
Well, obviously it means 100% power, or 5 watts on this Flex-1500.
My concern is, why do I get splatter at 30% power on one band, and no
splatter on other bands at 100% power?
As for a reference, I'm not sure what
Well, obviously it means 100% power, or 5 watts on this Flex-1500.
My concern is, why do I get splatter at 30% power on one band, and no splatter
on other bands at 100% power?
As for a reference, I'm not sure what you mean. I'm asking if other Flex-1500
owners have similar problems.
Mark
KD0
Mark:
What do you think 100 percent of power means on PSK-31?
What is the reference for the tests you are running?
--- Graham / KE9H
==
On Fri, Oct 18, 2013 at 7:08 AM, Mark Griffith wrote:
> Recently, I was working PSK31 on my Flex-1500 with other stations, and
> someone came on
> my freque
Recently, I was working PSK31 on my Flex-1500 with other stations, and someone
came on
my frequency and announced in a not very nice way that was I a lid and
splattering all over the band. I had not had any comments from anyone I had
worked before, so I was a little concerned if he was right.
Been using my Flex 1500 almost exclusively for serious QRP contesting for
several years. Life got better when I replaced an ageing HP that ran 20 per
cent CPU to an I7 stripped down PC that runs around 2 per cent with the Flex.
I either use an external Idiom Press memory keyer or setup Writelog
Phil :
I realized that I forgot to answer your question on how to adjust the Sidetone
level on CW.
To do this go to the Transmit tab (i.e. SETUP/Transmit). You will see
something called "TX AF"
under the heading "Monitor". This controls the monitor volume for SSB and the
sidetone level
for
very nice write-up, michael. well done! 73, w5xz, dan
From: Michael Babineau
To: phi...@mac.com
Cc: flexradio@flex-radio.biz
Sent: Wednesday, September 18, 2013 1:56 PM
Subject: [Flexradio] Flex-1500 on CW (was Re: Flex 3000 for DX'ing and SDR)
Phil :
There are likely a couple of things that need adjustment. But first off if you
are expecting
full break-in on CW from the Flex-1500 then you might as well put it up for
sale now.
Properly adjusted it will work as well (break-in wise as a semi-break-in rig
like the Ft-817)
but it won't
It's more of a SBB SDR radio. I have done some 13 to 20 wpm keyboard CW with
it. IT did fine for me. Could not get It to work with a ST key.
Also works great on digital modes . I have well over a 100 countries on
digital QRP.
Rick Kd4jrx
--
Fro
I just picked up a new Flex-1500 from a local Flex Dealer (RadioWorld). What,
if anything, do I need to do to ensure
that I get warranty coverage? I see nothing on the Flex Website about product
registration and there was no
registration card in the box with the rig, so I am guessing that I jus
Hi Mike
Not much really. Keep your receipt. If you have any warranty issues they
will be honoured by Radio World. I keep a copy of my receipts in the box
(if I keep the box). You don't need the original as they can quickly look
it up under your callsign.
This is the case for most of North Ame
could have been clearer?
> Why was a clarification sent out?
>
>
>
>
>
> From: ric5
> To: "hawley, charles j jr" ;
> flexradio@flex-radio.biz
> Sent: Tuesday, September 3, 2013 1:44 PM
> Subject: Re: [Flexradio] Fl
It was clear to me.
8
Sent from my iPad
Chuck, KE9UW
(Jack for BMW motorcycles)
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flex
It was ok with me !
--
From: "hawley, charles j jr"
Sent: Tuesday, September 03, 2013 1:32 PM
To:
Subject: Re: [Flexradio] Flex 1500 and 100 Watt amplifier for
sale:correction.
It was clear to me.
8
Sent from my iPad
Chuck, KE9UW
; From: w2txb.je...@gmail.com
> CC: flexradio@flex-radio.biz
> Subject: Re: [Flexradio] Flex 1500 and 100 Watt amplifier for sale:correction.
>
> Looking at the ad several times, I can see it either way, although my first
> impression was (unbelievable as it seemed) also $500.00 fo
.biz
Sent: Tuesday, September 3, 2013 1:44 PM
Subject: Re: [Flexradio] Flex 1500 and 100 Watt amplifier for sale:correction.
It was ok with me !
--
From: "hawley, charles j jr"
Sent: Tuesday, September 03, 2013 1:32 PM
To:
Subject: Re: [Flex
as not the readers fault, you made the mistake as we all can at times.
> Most don't blame others for their mistakes however.
>
>
>
> From: Bill K
> To: flexradio@flex-radio.biz
> Sent: Monday, September 2, 2013 10:30 PM
>
gt; To: flexradio@flex-radio.biz
> Sent: Monday, September 2, 2013 10:30 PM
> Subject: [Flexradio] Flex 1500 and 100 Watt amplifier for sale:correction.
>
>
> Several people have misread my ad for for a 1500 Flex and Superpacker
> Amplifier. Each item can be bough
@flex-radio.biz
Sent: Monday, September 2, 2013 10:30 PM
Subject: [Flexradio] Flex 1500 and 100 Watt amplifier for sale:correction.
Several people have misread my ad for for a 1500 Flex and Superpacker
Amplifier. Each item can be bought separately for $500 or buy the pair for
Several people have misread my ad for for a 1500 Flex and Superpacker
Amplifier. Each item can be bought separately for $500 or buy the pair for $1000
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo
ke the int. amp stop chattering...
maybe? 73, w5xz, dan
From: Douglas Hubbs
To: dan edwards
Sent: Sunday, August 25, 2013 6:20 PM
Subject: Re: [Flexradio] flex 1500 with 2 finals, cascaded
Dan,
As a AL-811H owner, I would put forth this observation, If
matt, can you key the intermediate amp with a ptt line?
73, dan, w5xz
From: "hmattc...@juno.com"
To: nealk...@gmail.com
Cc: flexradio@flex-radio.biz
Sent: Sunday, August 25, 2013 5:15 PM
Subject: Re: [Flexradio] Looking for Anyone using a SPE solid-state amp
Looking for a working Flex-1500.
Contact me of list at tmil...@swbno.org
Tom Miller AC5TM
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.c
Carol:
That is a simple and appropriate solution. Congratulations!
--- Graham / KE9H
==
On Fri, Jul 19, 2013 at 8:35 PM, Carol F. Milazzo, KP4MD/W6 <
kp...@cfmilazzo.com> wrote:
> My GPS disciplined 10 MHz square wave frequency reference did not work with
> the Flex 1500 since the Flex 1500 refe
My GPS disciplined 10 MHz square wave frequency reference did not work with
the Flex 1500 since the Flex 1500 reference input uses a bridge rectifier
as a frequency doubler and requires a sine wave source. Since a square
wave consists of a sine wave at the fundamental frequency combined with all
i
Hi All,
I have a Flex 1500 that is surplus to requirements, in original packing,
with leads, cd and docs.
S/N 5110-1078. Not many hours on the clock, virtually all psk31 contacts.
£400 inc p&p and insurance to U.K. destinations. New £599.95.
73
Tim
gm4lmh
___
Good afternoon all. Is there someone who can help me with a (VAC) Virtual
Audio Cable Control Panel problem using the Flex-1500 and JT65 software. I
can get it to receive but cannot get it to key up the Flex 1500? The JT65
software shows it going into the XMIT operation, but not keying the
FLEX-150
List
My GPS10V outputs a 10 Mhz signal that is a square wave. I heard the
Flex-1500 expects a sine wave. How will this impact using the 10 MHz
reference with the Flex-1500?
Steve
--
Apply appropriate technology. Use what works without prejudice.
Steven L Hess ARS KC6KGE DM05gd22
G
Using my Flex 1500 with great success on all digimodes, including WSPR. Oddly,
WSPR 2.21 will enable the Flex to band hop via CAT on all bands EXCEPT 15m.
Using PSDR 2.5.3. Thoughts anyone? Bob K4RCG
___
FlexRadio Systems Mailing List
FlexRadio@flex-ra
Flex1500 +power suplay for 400euro+ shipping Spain o EU only
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
I hope I am not about to ask a stupid question, but here
goes.
I have a F3K running with CWSkimmer without issues. No
problems whatever.
I recently acquired a F1.5K. I cannot get Skimmer to work
properly at all.
My question is: What is the difference, concerning Skimmer,
between the 3k and 1
Radio is sold, thanks to all.
Victor K4XTT
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base
I have a 1500 and use it on SSB and AM with no issues. Perhaps I can help.
Bob, NZ5A
Sent from my iPhone
On Apr 19, 2013, at 4:21 PM, wrote:
Is there anyone with a 1500 that can email me direct to discuss a audio
transmit issue with a 1500 please ?
Thanks
Cecil
W4CM
w...@cox.net
I use a 1500 and use i
Sent from my iPhone
On Apr 19, 2013, at 4:21 PM, wrote:
Is there anyone with a 1500 that can email me direct to discuss a audio
transmit issue with a 1500 please ?
Thanks
Cecil
W4CM
w...@cox.net
___
FlexRadio Systems Mailing
Is there anyone with a 1500 that can email me direct to discuss a audio
transmit issue with a 1500 please ?
Thanks
Cecil
W4CM
w...@cox.net
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradi
On Thu, Apr 18, 2013 at 9:32 PM, Steven Hess wrote:
> Is the Flex-1500 like the Flex-3000 and Flex-5000 as far as the toughness
> of Final output stage duty cycle goes? Will it hold up to 2 minute back to
> back transmissions at full power?
>
Yes.
--
Brian Lloyd, WB6RQN/J79BPL
706 Flightline D
Is the Flex-1500 like the Flex-3000 and Flex-5000 as far as the toughness
of Final output stage duty cycle goes? Will it hold up to 2 minute back to
back transmissions at full power?
I have it playing nicely along with the Flex-3000 now I want to make it my
WSPR radio on 30 meters at 5 watts if it
> coming out at a very low level that the Oscope can't measure. I can
> measure 5 watts output from my other rig on the Oscope at about .02 V. Not
> a wiggle out of the Flex.
> >
> >
> > From: Peter Gorman (G1FXE)
> > To: Otto
> > Cc: "flexradi
t a
> very low level that the Oscope can't measure. I can measure 5 watts output
> from my other rig on the Oscope at about .02 V. Not a wiggle out of the Flex.
>
>
> From: Peter Gorman (G1FXE)
> To: Otto
> Cc: "flexradio@flex-radio.biz"
> Sent: Th
_
From: Peter Gorman (G1FXE)
To: Otto
Cc: "flexradio@flex-radio.biz"
Sent: Thursday, April 11, 2013 3:03 PM
Subject: Re: [Flexradio] Flex 1500 No RF output
I've experienced similar before. In my case it was a poor connection on the BNC
connector, powersdr showed full out
I've experienced similar before. In my case it was a poor connection on the BNC
connector, powersdr showed full output but nothing got to my external swr/power
meter. Is this what your seeing ?
Peter.(G1FXE)
On 11 Apr 2013, at 19:29, Otto wrote:
> No RF output on 1500. Worked great the da
No RF output on 1500. Worked great the day before. Checked all settings to make
sure nothing changed. Tried tune out and still no output. Did a default reset,
noRF output, went through and set things up again. Still no RF output even on
tune out set at full. Tried all bands and modes. Everything
1 - 100 of 670 matches
Mail list logo
