ted it and it works well now :) Thanks!
Soujanya
From: "Alan DeKok" <[EMAIL PROTECTED]>> To: [EMAIL PROTECTED]> Subject: Re: freeradius mysql simultaneous-use question URGENT=20> Date: Tue, 16 Dec 2003 16:33:11 -0500> Reply-To: [EMAIL PROTECTED]>=20> Soujanya Rao &
Soujanya Rao <[EMAIL PROTECTED]> wrote:
> Can anyone tell me where I am going wrong? This is urgent and I am
> clueless as to what else needs to be done.
Ensure that 'sql' is listed in the 'accounting' section.
Run: radiusd -X
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://ww
Hi,
I am new to freeradius. I need some help in using simultaneous-use for detecting double logins using mysql only. Here is my current set up:
> select * from radgroup check
++--- +---++---+| id | GroupName | Attribute | op | Va
If I use freeradius with portsale check mulltiple logins (Simultaneous-Use) works only
with "finger"?
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
outubro de 2003 17:53
Para: [EMAIL PROTECTED]
Assunto: Re: RES: simultaneous use not working in mysql
On Mon, 2003-10-27 at 13:22, Sergio Jose Ferreira wrote:
> How is the session configuration at radiusd.conf ?
>
> check with sql session or radutmp ?
I suppose both of them. In my ra
simultaneous-use sql line is enabled at the end of sql.conf
> file.
>
In sql.conf, the "Simultaneous Use Checking Queries" are uncommented.
Omar
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
How is the session configuration at radiusd.conf ?
Are you check with sql session or radutmp ?
If sql, check if simultaneous-use sql line is enabled at the end of sql.conf
file.
Sergio Jose Ferreira
WGO Internet
-Mensagem original-
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] nome
I have freeradius 0.9 with mysql module working, but simultaneous use is
not working well.
I want that all users to have only active session at a time.
This is an example of my database configuration:
-
mysql> select * from radcheck where username=
Why if I use:
qwerty Auth-Type = Crypt-Local, Crypt-Password ==
"$1$PkxbkAzR$byaCpj1GQOL0HxbxhJHRb0", Simultaneous-Use := 0
Exec-Program-Wait = "/usr/local/billing/start %u",
Service-Type = Framed-User,
F
On Thu, 9 Oct 2003, Kristina Pfaff-Harris wrote:
> I'm sure I'm probably making this way too complicated, but I've been over
> and over the docs on proxy, simultaneous use, huntgroups, users etc, and
> I'm not getting anywhere. The closest I came was disabling simul
I've run into an interesting dilemma. We've been using Simultaneous-Use
checking on our users, and it's worked great. Unfortunately, we're now
also offering dialup in other cities through MegaPOP, and since those
aren't our servers, obviously we can't snmp or fin
On Fri, 19 Sep 2003 11:8:55 +0800
"╩ф╫╗╡╗" <[EMAIL PROTECTED]> wrote:
test Auth-Type = Crypt-Local, Crypt-Password == "$1$YoWRpiSV$QsHmtOSFoOGEw4i7LjaLV/",
Simultaneous-Use := 1
> Hi all!
>How to configure some accounts be limited to only one
see /doc/Simultaneous-Use
Am Fre, 2003-09-19 um 05.08 schrieb 黄建波:
> Hi all!
>How to configure some accounts be limited to only one login at a time and some
> not?
>
>
>
>
>
>
> 致
> 礼!
>
>
> 黄建波
&g
Hi all!
How to configure some accounts be limited to only one login at a time and some not?
致
礼!
黄建波
EMAIL:[EMAIL PROTECTED]
TEL:020-87114020 020-87114021
2003-09-19
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.htm
Double <[EMAIL PROTECTED]> wrote:
> why if I use Simultaneous-Use :
...
Posting the same message multiple times won't endear you to people.
Here's a hint: You didn't read 'doc/Simultaneous-Use'. And if you
did, you didn't read it carefully enough
You should read the man page for users regarding the usage of =,:=, +=, etc...
You usually need to use := with Simul-Use
Nick
On Wednesday 17 September 2003 09:25, Double wrote:
> why if I use Simultaneous-Use :
>
> testAuth-Type := Crypt-Local, Crypt-Password ==
>
On Wed, 17 Sep 2003 18:25:56 +0400 (MSD)
Double <[EMAIL PROTECTED]> wrote:
I I understand my mistake %)
Simultaneous-Use = 1 fail
Simultaneous-Use := 1 ok
> why if I use Simultaneous-Use :
>
> testAuth-Type := Crypt-Local, Crypt-Password ==
> "$1$0MrvlCBQ
why if I use Simultaneous-Use :
testAuth-Type := Crypt-Local, Crypt-Password ==
"$1$0MrvlCBQ$udnwuVmMLsn8GphGQQugF1", Simultaneous-Use = 1
Exec-Program-Wait = "/usr/local/bin/start %u",
Service-Type = Framed-User,
Framed-Protocol = PPP,
why if I use Simultaneous-Use :
testAuth-Type := Crypt-Local, Crypt-Password ==
"$1$0MrvlCBQ$udnwuVmMLsn8GphGQQugF1", Simultaneous-Use = 1
Exec-Program-Wait = "/usr/local/bin/start %u",
Service-Type = Framed-User,
Framed-Protocol =
internet
>
>
> -Mensagem original-
> De: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] nome de Double
> Enviada em: quarta-feira, 17 de setembro de 2003 10:11
> Para: [EMAIL PROTECTED]
> Assunto: Problem with Simultaneous-Use
>
>
> why if I use Simulta
D]
Assunto: Problem with Simultaneous-Use
why if I use Simultaneous-Use :
testAuth-Type := Crypt-Local, Crypt-Password ==
"$1$0MrvlCBQ$udnwuVmMLsn8GphGQQugF1" Simultaneous-Use = 1
Exec-Program-Wait = "/usr/local/bin/start %u",
Service-Type = Framed-User,
why if I use Simultaneous-Use :
testAuth-Type := Crypt-Local, Crypt-Password ==
"$1$0MrvlCBQ$udnwuVmMLsn8GphGQQugF1" Simultaneous-Use = 1
Exec-Program-Wait = "/usr/local/bin/start %u",
Service-Type = Framed-User,
Framed-Protocol = PPP,
group and giving 20 as Simultaneous-Use limit. So
everybody use the same user/pass combination. Now I am sure, most
probably you already thought of this :) but you cant use.
Well, it also shouldnt be very difficult to add a groupwise simultaneous
use attribute to freeradius since it alrea
I dont believe freeradius can do this. At least not with SQL because I
didnt see any SELECT commands which satisfy this situation in sql.conf
But there could be a simple way to manage this problem. By assigning one
username to your group and giving 20 as Simultaneous-Use limit. So
everybody use
Hi,
I want to have a simultaneous-use limit for groups. E.g., I have, say,
50 users in group1 and I want to set limit for group1 to, say, 20... If
there are already 20 online dialup users at any given time, 21st users
will be denied access.
(user<->group relation is already set up in da
Ulrich Walcher <[EMAIL PROTECTED]> wrote:
> Is there any reason why the "Simultaneous Use Checking Queries" that are
> present in sql.conf and oraclesql.conf do not appear in postgresql.conf?
No one's written them yet.
Alan DeKok.
-
List info/subs
Is there any reason why the "Simultaneous Use Checking Queries" that are
present in sql.conf and oraclesql.conf do not appear in postgresql.conf?
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi all!
I've been trying to get simultaneous-use work with Cisco VoIP calls. After
looking through this list and doing some test over a freeradius-0.9.0 on
BSDi4.3 I found that it's not posible, so I only want to confirm this.
During accounting session radutmp module stores some informa
On Wed, Aug 13, 2003 at 02:33:57PM +0200, Ulrich Walcher wrote:
> Is there any reason why the "Simultaneous Use Checking Queries" that are
> present in sql.conf and oraclesql.conf do not appear in postgresql.conf?
They are in 0.9 and current CVS. Please check it.
--
Fduch M. P
ThanX
> On Wed, Aug 13, 2003 at 02:33:57PM +0200, Ulrich Walcher wrote:
> > Is there any reason why the "Simultaneous Use Checking Queries" that are
> > present in sql.conf and oraclesql.conf do not appear in postgresql.conf?
>
> They are in 0.9 and current CVS. Ple
"Guillermo Delmastro" <[EMAIL PROTECTED]> wrote:
> The problem is that for a voip call (i am using it throgh an IVR) the
> nas-port is always 0, so for the same user (called PIN) calling from the
> same nas, we are only able to see one entry in radutmp file. For this
&
>
> Is there another possibility I've overlooked? "Conditional check-items"?
>
It's very good idea - "Conditional check-items". I just want to show
another real-life example where it can be very helpful feature.
We sale different internet services, including dialup and campus
(ethnernet clients get
wholesale
arrangement?
Simultaneous-use without the ability to contact the NAS is not
recommended, but I do understand that it is being used successfully in
this configuration. Does anyone have any tips or tricks to reduce false
positives? There was some mention or adding a one minute cache of auth
re
Simultaneous-use feature is causing nntp and other authentications to fail
since there is already an active dialup session in radutmp. Just an FYI we
are using MySQL for auth, acct, and radutmp.
Preferably I would like to attach the Simultaneous-use check item to a
specific realm or even to a client name
Define 2 db instances.
Use one for autentication and the other for accounting.
Joao Frade
-Original Message-
From: Ali Gunduz [mailto:[EMAIL PROTECTED]
Sent: quinta-feira, 17 de Julho de 2003 14:59
To: [EMAIL PROTECTED]
Subject: RE: Simultaneous use of two DBs
Well, I'm sure ther
esql (or any other lightweight DB) for logging purposes..
Any more suggestions? :)
Thanks
Ali
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Tim McCracken
> Sent: Thursday, July 17, 2003 16:51
> To: [EMAIL PROTECTED]
> Su
Gunduz
> Sent: Thursday, July 17, 2003 8:25 AM
> To: [EMAIL PROTECTED]
> Subject: Simultaneous use of two DBs
>
>
> Hi,
>
> I want to log start/stop packets in postgresql and use DB2 for
> authentication information.
> All my user information resides in DB2.. I cannot
Hi,
I want to log start/stop packets in postgresql and use DB2 for
authentication information.
All my user information resides in DB2.. I cannot migrate it to
postgresql.
I couldn't figure out how I could do this in sql.conf..
Anyone has any suggestions or documents about this?
Thanks
Ali Gund
I found the source of my problem but I don't how to fix it:
in radiusd.conf
session {
# radutmp
sql
}
If I set it to radutmp, it works, simultaneous-use works.
If I set to sql, simultaneous-use does not work. Authentication passes all
the time.
Can anyone tell me what I am
("dialup", "Simultaneous-Use", ":=", "1");
(Of course I have a group dialin)
when I run checkrad manually, I see in /var/log/freeradius/checkrad.log:
snmpget: /usr/bin/snmpget -r 1 -t 5 1.2.3.4 snmppassword
.iso.org.dod.internet.private.enterprises.
e ciftci wrote:
> > Dear list,
> > I am using (v0.8.1)
> > simultaneous-use attribute with Bay RAC 8000 without problems.
> > Users also get and see the "You are already logged in - access denied"
> > message through NAS-Prompt when they are trying to conne
On Fri, Jun 20, 2003 at 11:57:46AM +0300, gunce ciftci wrote:
> Dear list,
> I am using (v0.8.1)
> simultaneous-use attribute with Bay RAC 8000 without problems.
> Users also get and see the "You are already logged in - access denied"
> message through NAS-Prompt when t
Dear list,
I am using (v0.8.1)
simultaneous-use attribute with Bay RAC 8000 without problems.
Users also get and see the "You are already logged in - access denied"
message through NAS-Prompt when they are trying to connect beyond the
limit. To make life easier for hot-line staff, we s
If configured correctly the "Simultaneous-Use =1" parameter will limit
simultaneous logins into THAT RADIUS server to 1. If you have 1 or
fifty NAS devices pointed at the same RADIUS server with
Simultaneous-Use = 1 set for a user, that user will only be allowed to
login once no ma
Q: I have 4 usrhipers setup for dial in. If customer A dials into arc 1
and then dials in again and gets a modem on arc 2, will they be denied
access if the Simultaneous-Use is set to 1. Or will it only check if
they are attempting to connect to the same arc as the original
connection?
Jeff
Hello,
does anybody know how to get radcheck to work with a Colubris NAS ?
I need to enforce the Simultaneous-Use check.
The NAS does support SNMP but I don't see any reference to this product
in the supported devices list from radcheck.
Maybe somebody knows how to get this to work? :)
Hello
Here's what I have done
I inserted ("dialup", "Simultaneous-Use", ":=", "1") into radgroupcheck.
And I uncommented simul_count_query and simul_verify_query on sql.conf.
After I done that I when I looked at the radius.log.And it seemed tha
Ross Reed <[EMAIL PROTECTED]> wrote:
> We are currently doing national dialup(freeradius 0.8.1 w/ mysql for
> auth/acct) , but with no access to the national NAS's. Since radwho seems to
> be flaky at times (radutmp seems to get dupes in it) Is there anyone out
> there
Title: Message
We are currently
doing national dialup(freeradius 0.8.1 w/ mysql for auth/acct) , but with no
access to the national NAS's. Since radwho seems to be flaky at times (radutmp
seems to get dupes in it) Is there anyone out there doing Simultaneous-Use
another way? A mod
Simultaneous-Use := 1 must be in the radcheck or radgroupcheck tables, not
the radreply or radgroupreply tables.
Ed
From: Travis Best <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Previnting Simultaneous-Use
Date: Fri, 21 Mar 2003 16:02:10 -0500
I am authencitaing via a mysql database in the radreply table i have
123 username Simultaneous-Use := 1
and have sql chosen is the radiusd.conf under session but users are
still able to doubble login is there something that i am missing? I had
this feature working when i was using the users
"Ed H" <[EMAIL PROTECTED]> wrote:
> I am sending accounting (start/stop). But what happens is the same username
> will be recorded multiple times in the MySQL database with a new
> AcctStartTime for each entry. I can do this multiple times with the
> Accounting Start packet sent from NTRadPing
the records for that username will
be ended with the same AcctStopTime entered into the MySQL database, and
every entry for that username has been stopped.
Ed
From: "Scott Bartlett" <[EMAIL PROTECTED]>
To: "Ed H" <[EMAIL PROTECTED]>
Subject: RE: Simultaneous-U
could know
active session)? Is this possible? I have read alot of documentation, maillists, but I
can't find anything I needed.
Simultaneous-Use?
Any ideas/advices? If it is possible show cuts from configs.
--
Sincerely,
Dennis
-
List info/subscribe/unsubscribe? See http://www.free
Hello,
I am using MySQL with FreeRadius 0.8.1, and RedHat 8.2, and testing with
NTRadPing. I also have SNMP_Session and BER installed.
I have put Simultaneous-Use := 1 into my radgroupcheck table. However, I
can still login the same user multiple times and it shows up into the
radacct table
"Josh Kleensang" <[EMAIL PROTECTED]> wrote:
> Is there any way (don't you love it when emails start
> out that way...) to have freeradius arbitrarily kill a
> session (record a session stop time and forget about it)
> when another session is started with the same username?
Write an external scri
On Fri, 14 Mar 2003, Kristina Pfaff-Harris wrote:
> Okay, this is really bizarre. After awhile, Simultaneous-Use just stops
> working and lets people log on more than once. (I haven't figured out how
> long "awhile" is at the moment. Definitely overnight, possibly a coup
login wont actually happen because all of
an upstream radius server/proxy. I know that checkrad is
supposed to verify if the session is there or not but I
don't have access to the NAS servers and cannot directly
verify the login.
It may be useful to add an option to Simultaneous-Use where
t
Okay, this is really bizarre. After awhile, Simultaneous-Use just stops
working and lets people log on more than once. (I haven't figured out how
long "awhile" is at the moment. Definitely overnight, possibly a couple of
hours.) At that point, it seems to stop running check
session returns noop
Sending Access-Accept of id 223 to a.b.c.d:32771
Finished request 0
Going to the next request
SMUX connect try 2
Can't connect to SNMP agent with SMUX: Connection refused
--- Walking the entire request list ---
Waking up in 6 seconds...
SMUX connect try 3
Can't connect to
At 03:54 PM 3/11/2003 +0500, Eric wrote:
I'm using mysql authentication scheme.
As shown in documentation i'm set in radgroupcheck table such row:
groupname | parameter | op| value|
-
test |Simult
I'm using mysql authentication scheme.
As shown in documentation i'm set in radgroupcheck table such row:
groupname | parameter| op | value|
-
test |Simultaneous-Use| := | 1 |
But I still h
Le Samedi 22 Février 2003 02:07, Kristina Pfaff-Harris a écrit :
> Simultaneous-Use set to 1, if I dial into a Max when the account is
> already logged on, I get dropped to the internal ascend% prompt.
Well, my tests here (with a MAX4048) didn't show such a behaviour. I
just get d
Well, this is quite bizarre. I have Ascend Maxen, Livingston Portmaster
III's, and a couple of Ciscoes as dialup servers. With Simultaneous-Use
set to 1, if I dial into a Max when the account is already logged on, I
get dropped to the internal ascend% prompt.
I know this is likely an A
Hello,
I am trying to get our radius servers to authenticate a virtual ISP request.
When we have the Simultaneous-Use attribute in radcheck it ALWAYS fails with
a Multiple login error, no matter how may Simultaneous-Use I give it. It
always says there are more logins then the number I have. I
Justin Wheeler <[EMAIL PROTECTED]> wrote:
> If checkrad is run, and returns that the user is *not* online, does it
> automatically zap them from radutmp?
Yes.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
If checkrad is run, and returns that the user is *not* online, does it
automatically zap them from radutmp?
Thanks,
Justin Wheeler
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On Thu, 20 Feb 2003, Justin Wheeler wrote:
> my naslist has the nas that the first connection is connected to in it,
> and it is listed as livingston.
In clients.conf, do you have
nastype = livingston
for that nas entry?
Kristina
-
List info/subscribe/unsubscribe? See http://www.freeradius
I've set a test user with a Simultaneous-Use value of 1.
The server is automatically disallowing any attempt to duplicate usage,
but it's basing its result SOLELY on radutmp. It doesn't use checkrad.
Logs show nothing. No attempt, no failure, nothing.
checkrad exists as co
Justin Wheeler <[EMAIL PROTECTED]> wrote:
> Instead of spending all that time with the checklogin.pl script, I'm
> wondering if there's any issue with finding duplicate logins via the
> following:
>
> A user attempts to login -- but there's already a record of login for that
> user.
>
> I grab th
> Am I missing anything?
IMHO, I wouldn't introduce the combined latency and fallability of ICMP
request/response packet processing and SNMP query/response handling into the
authentication/authorization process. It seems vulnerable to failure and lacking in
scalability.
ICMP packets dropped
Instead of spending all that time with the checklogin.pl script, I'm
wondering if there's any issue with finding duplicate logins via the
following:
A user attempts to login -- but there's already a record of login for that
user.
I grab that IP address that it says they're on, and see if anyone w
displayed. Is there a
configuration option for the radwtmp file to strip the suffix?
Doug
-Original Message-
From: Alan DeKok [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 03, 2003 3:18 PM
To: [EMAIL PROTECTED]
Subject: Re: freeradius ramutmp/radwho suffix simultaneous use issues...
"
d-User-Name:-%{User-Name}}
...
}
Restart the server, and the suffixes should be stripped.
The only issue is that Simultaneous-Use may not work properly, due
to the mixup between 'user@domain' and 'users'.
> * When I run radwho, the Login column includes the s
lled freeradius 0.8.1 on a new Redhat 7.3 server and it appears to
be authenticating users properly. I am authenticating via unix
passwd/shadow files and have restricted simultaneous use to one. Detail
logging is enabled and I have enabled suffix stripping so that users are
authenticated if they inc
On Wednesday, December 11, 2002, at 03:42 PM, Dan wrote:
Well I got our AS5200s simultaneous use to work finally.
congratulations
Now the problem is the cisco 7500 we have for DSL.
checkrad (running full debug mode on radius) shows
"no response"
The world is not perfect. :-)))
Well I got our AS5200s simultaneous use to work finally.
Now the problem is the cisco 7500 we have for DSL.
checkrad (running full debug mode on radius) shows
"no response"
it looks like the MIBs are wrong.
so in this case I have two questions:
1. how do I find the correct MIBs? (ye
I'm trying to use FreeRADIUS simultaneous use control. All requests are
proxied to another RADIUS server. However, I wanted FreeRADIUS to control
this.
>From debug (radiusd -X) it looks to me that FreeRADIUS sends the request to
the other server before checking.
It worked once but
Hello,
I am trying to use Simultaneous-Use for group users through mysql with
freeradius-snapshot-20021101.
radiusd.conf:
==
# Session database, used for checking Simultaneous-Use. The radutmp module
# handles this
session {
# radutmp
sql
}
sql.conf
The documentation DOES say "there is no solution at this time".
> A bit about docs. I think that minor comment is needed in
> Simultaneous-Use at line 32: "You need to set the correct type in the
> file /etc/raddb/naslist" must become "You need to
now what I've got. ;)
I agree that maybe I've chosen wrong form for my question. And at this point
I thing that we can stop our non-productive flg.
At now I'm trying to find the solution. On success I'll post it to
-devel list.
A bit about docs. I think that minor comment i
interested in my solutions.
I have REPEATEDLY said I'm interested in solutions, so you are
intentionally misunderstanding me. That's annoying, and it's not
productive.
What I'm NOT interested in are complaints that the server is
broken. Yes, we already know Simultaneous-Use
> Yes... this is what section 5 of the Simultaneous-Use document
> says. I don't understand why you're telling us what we already know.
> It would have been sufficient to simply reference the document.
Yes...my post was _only_ (another) real-world example about what
sec
ot check NAS for twice login and will
> successfully authenticate the user. So we have simultaneous use
> (consequences of such behaviour is another story).
Yes... this is what section 5 of the Simultaneous-Use document
says. I don't understand why you're telling us what we alrea
Hi!
Accordingly to 'doc/Simultaneous-Use' this feature works in this way:
if someone tries to ask for authentication, radiusd first search
radutmp file (or 'sql') and (only) if there is an open session for that
user server uses checkrad script to query NAS. Record in radutm
Hi all !,
Joshua, I tried that, it works OK !.
Thank you,
Jorge.
JC> Greetings,
JC> I got Simultaneous-Use working with a MySQL setup and though I would
JC> tell you all how I got it to work in case anyone has any questions:
JC> Read http://www.freeradius.org/radiusd/doc/Simulta
Joshua Corbin <[EMAIL PROTECTED]> wrote:
> I got Simultaneous-Use working with a MySQL setup and though I would
> tell you all how I got it to work in case anyone has any questions:
That's good to hear.
> Just make sure that checkrad works with your setup; I had to c
Greetings,
I got Simultaneous-Use working with a MySQL setup and though I would
tell you all how I got it to work in case anyone has any questions:
Read http://www.freeradius.org/radiusd/doc/Simultaneous-Use
I setup the naslist/naspasswd files, then all I had to do was:
Just make sure that
he feature "Simultaneous-Use" uses the "radwtmp" file. But the accounting
do not go on those servers, so I cant do the check.
I have done a little perl script which uses the accouting information to
detect duplicate session and I would like to implement it. how can I tell
the radius server
Hi all !,
Would some one give me some help about using simutaneous-use
feature ?. I can not get this work at all ...
Thank you,
Jorge.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
not forget to add a line like the following in
your users file
DEFAULTService-Type == Framed-User, Simultaneous-Use := 1
Framed-Protocol = PPP,
Framed-Compression = Van-Jacobson-TCP-IP,
Framed-MTU = 1500
If none of the above helps .. go back to step 1
Jorge Minassian
Hi again, I need to have some solution about this, Chris can you
helpme ?, any one on the list please ?
Thank you very much.
JM> Chris,
JM> thank for your answer,
JM> I put radius on debug mode, then called nas (Total Control
JM> w/HiperArc) as a user that where connected, but
Chris,
thank for your answer,
I put radius on debug mode, then called nas (Total Control
w/HiperArc) as a user that where connected, but I don't see any error
and the request have not been rejected.
Below is the result of debug mode.
After that you have again radiusd.conf.
Tha
At 09:07 AM 10/17/2002 -0300, Jorge Minassian wrote:
Hi all !,
I am having some trouble about simultaneous connnection.
I can not see where would be the error on configuration, if any, and did
not get nothing browsing docs, faqs, etc, that were applicable to my config.
Can some one give some id
Hi all !,
I am having some trouble about simultaneous connnection.
I can not see where would be the error on configuration, if any, and did
not get nothing browsing docs, faqs, etc, that were applicable to my config.
Can some one give some idea about this ?.
My radiusd.conf is like what is detai
"Funk, Michael" <[EMAIL PROTECTED]> wrote:
> I'm being told by other sources that you must have SNMP access to the NAS in
> order for Simultaneous-Use and Port-Limit to work.
No. Port-Limit is an attribute that the RADIUS server sends to the
NAS. If the NAS ignor
Forgive me, but I left something out.
My radius boxes are at the end of a proxy So, I get all of my requests
to my servers by proxy.
I'm being told by other sources that you must have SNMP access to the NAS in
order for Simultaneous-Use and Port-Limit to work.
How would I be able to
gt; My radius boxes are at the end of a proxy So, I get all of my requests
> to my servers by proxy.
>
> I'm being told by other sources that you must have SNMP access to the NAS in
> order for Simultaneous-Use and Port-Limit to work.
>
> How would I be able to "work
Forgive me, but I left something out.
My radius boxes are at the end of a proxy So, I get all of my requests
to my servers by proxy.
I'm being told by other sources that you must have SNMP access to the NAS in
order for Simultaneous-Use and Port-Limit to work.
How would I be able to
t;
>I am unable to make the attributes in the "users" file take affect, like
>Simultaneous-Use :=1
>
>Here's what I have in users
>
>DEFAULT Service-Type == Framed-User
> Framed-IP-Address = 255.255.255.254,
> Simultaneous-Use := 1,
Simultaneous
1 - 100 of 217 matches
Mail list logo