I've looked at http://jerakeen.org/code/pythondaap/
which seems to be a set of classes to interface with
a DAAP server (the protocol behind itunes). looks
promising but i don't see the kind of generic
browsing/zeroconf hooks. Haven't had much time to do
anything other than look to see if anyone
Might be there for like DXR3 output support.
Mike
--- Andrew Jergens [EMAIL PROTECTED] wrote:
My progress is very slow because I'm building a
garage in my backyard. I'll
keep you informed of my progress.
However, from what I understand smpeg is an OPTIONAL
dependency of pygame.
Since
Mat,
did you follow the instructions in the freevo wiki? I
have freevo setup as a session using the wiki
instructions and it logs out fine. the instructions
are at the bottom of this page:
http://freevo.sourceforge.net/cgi-bin/doc/BootFreevo
Mike Ruelle
--- mat holton [EMAIL PROTECTED] wrote:
from the video card
so you might have to buy them in a pair.
the card i have is from http://www.pchdtv.com/ and i got the HD 3000.
--
Michael Ruelle [EMAIL PROTECTED]
On Sun, 2006-03-26 at 14:01 -0500, Rick Seiden wrote:
Hello everyone.
Before I ask this question, I want to say that I've
remember XML if very strict you must use closing tags. you are missing
the /tv needed at the end of the file. Other than that there is an xml
schema for the xmltv data at:
http://membled.com/twiki/bin/view/Main/XmltvFileFormat
Mike Ruelle
[EMAIL PROTECTED]
On Thu, 2006-01-19 at 22:01 +0100,
Claudio
On Fri, 2004-11-19 at 22:14, [EMAIL PROTECTED] wrote:
Thanks, added to the games emulator page in the wiki.
--
Michael Ruelle
[EMAIL PROTECTED]
begin
button = menu
prog = irexec
repeat = 3
, USA)?
need to use tv_grab_na_dd now. i don't think zap2it.com allows the older
grabber anymore. you will have to get a zap2it.com account at
labs.zap2it.com to use the grabber.
--
Michael Ruelle [EMAIL PROTECTED]
---
This SF.Net email
to view it in freevo 1.5 and 1.5.1 just put this in your local_conf.py:
plugin.activate(tv.view_line_in)
as for adding it as a channel that is currently not implemented but on
the slate for 1.6.
Mike Ruelle
On Tue, 2004-10-19 at 07:52, Justin wrote:
Hi all,
I would like to add the composite
you need to install pylirc. It is a python module for talking to lirc.
It is in the required pacakges list.
Mike Ruelle
On Sun, 2004-10-17 at 21:32, Robert Kortenoeven wrote:
Hi all,
I've got Freevo up and running (again), but no luck with getting Lirc
to work. It keeps complaining about
you need to configure tv_grab_na_dd. the error is telling you to run the
command from the command line:
tv_grab_na_dd --configure
but before you do this you need to get an account from labs.zap2it.com.
This is required for this particular xmltv grabber.
Mike Ruelle
On Sun, 2004-10-17 at 14:31,
this information more reliably.
--
Michael Ruelle [EMAIL PROTECTED]
---
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free
Justin,
do you have pyxmms installed? what version? What version of xmms do you
have installed? There is warnings in the pyxmms documentation that for
some versions of xmms it has problems telling it to do what it wants.
Mike Ruelle [EMAIL PROTECTED]
On Mon, 2004-09-13 at 23:24, Justin
already present:
http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage_2fUsageInfo#head-0f8cc4f34d7f062324d03aa0aea031c22c11c1c9
Mike Ruelle
On Sat, 2004-09-04 at 17:05, Jess Mahan wrote:
How about being able to password protect directories?
I know that someone can circumvent
Mick,
The setting was not advertised. It was a hack. The real code to do this
automatically without having to set up anything has been delayed a
little but until some new functionality for events has been added to the
recordserver. it is expected to be in the real 1.5 release just not in
there
Basically this is because tvtime, mplayer and other apps can never agree
on what to call the channels. So the naming conventions differ all
around. By default the recording stuff uses the mplayer versions of the
channels, and tvtime uses it own format. we are working on a system to
unify it but
On Sun, 2004-02-22 at 17:12, Alex Cruz wrote:
Please excuse these questions but I'm having a brain fart lately. With that
said:
1)What is the name of the Games plugin so that I can disable it being
listed in the menus?
add this to local_conf.py:
plugin.remove('games')
2) What is
as a hack right now i Have DEFAULT_REC_EXT added to the config file to
set the ending if you don't want mpeg. As to the automatic
thumbnailling. right now no. The fxd is written before the recording
even begins. You will have to wait until the event on recording ended
has been added to
Missing the important bit? What version of freevo? 1.4 or 1.4.1 or CVS?
The important distinction is that only CVS right now detects tvtime
0.9.12 and possibly 0.9.11 correctly. you will need to change the
following line from (it should all be on one line no \):
data = re.search( ^tvtime: Running
Try the recording Info page again. I noticed this morning the use of a
VCR variable which was probably not good. so i removed it in favor of
harcoding the /dev/dsp adevice. I have also included a new style
mencoder command and an old style mencoder command.
Also there is a link on the page to a
Bart,
thanks for the example. It has been added to the RecordingInfo page. I
left it using CD IN as the source but used the avi recording rather than
the nuv.
Mike
On Sun, 2004-02-08 at 12:29, Bart Heremans wrote:
Hi,
I had the same problem like you, sound when capturing but not when I
You need to compile and install pygphoto. It is in one of the WIP
directories. I have gotten that far but i think gphoto has changed since
this was written since i can't get the gphoto plugin to work using it.
It compiles fine and installs. It just doesn't seem to be able to
connect to the camera.
like to play with it a little.
Jim
Michael Ruelle [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]
You need to compile and install pygphoto. It is in one of the WIP
directories. I have gotten that far but i think gphoto has changed since
this was written since i can't get
On Thu, 2004-02-05 at 19:23, Bernard Mentink wrote:
1. I have set the local.freevo.conf file to start up freevo in full-screen
mode. This only
works with freevo.conf setting x11, xv will not let freevo start
full-screen.
xv is covered by X11. If you look at the mplayer command used it will
a soundblaster look them over to make sure they are
correct.
--
Mike Ruelle
[EMAIL PROTECTED]
http://world.std.com/~mruelle/
On Sun, 2004-02-01 at 23:30, Michael Ruelle wrote:
the files in there are two scriplets for the setmixer application and a script
to use as a substitute for the VCR_CMD
please look at:
http://freevo.sourceforge.net/cgi-bin/moin.cgi/RecordingInfo
if you are using lineIn to record then look at the TV LineIn section.
--
Mike Ruelle
[EMAIL PROTECTED]
http://world.std.com/~mruelle/
On Sun, 2004-02-01 at 14:31, Peter Howell wrote:
I can almost taste a functioning
Hmm this used to work with Twisted 1.06 but now with 1.1.0 I need this
patch too. I will have to look at the changelog for twisted.
Mike
On Mon, 2004-01-26 at 03:22, Pferdekaemper, Thorsten wrote:
Hi,
I had a similar problem. I tracked it down and created a diff I have posted last
week. I
On Sat, 2004-01-24 at 04:27, Frederik wrote:
Hi Michael!
Thanks for that Plugin, works fine!
But I still wonder why we need this plugin!
Because shutdown as it exists now is only a MainMenuItem. We left POWER
open. Mainly i think cause until recently we didn't have a totally
plugin
it might better to make it a daemon plugin like the power shutoff (or
actually combine the two.) And have the POWER button turn it off
according to config defaults and the SLEEP button tell it to turn off in
a config set amount of time.
Mike
On Sat, 2004-01-24 at 13:06, Justin T Wetherell wrote:
I made it its own plugin. If you send power over the remote or press F2
on the keyboard it will shutdown. THe onyl thing i found issue with is
that i am having a focus problem with tvtime and mplayer again so you
can't do this while watching tv or a movie with the keyboard but from
the remote I
On Thu, 2004-01-22 at 15:05, Gustavo Sverzut Barbieri wrote:
Other expansions which may be a bit harder (hotkey/gui changes):
- Additional key-bind to toggle Tagged status of currently
hilighted file/
dir (saves having to rummage through the Enter menu)
- Symbol or Font Style change
This looks like a tvtime plugin issue. Currently the Tvtime plugin does
not use the new videogroups method of defining tv viewing. Are you
using CVS?
Mike
On Wed, 2004-01-21 at 12:57, FStruck wrote:
Am Mi, den 21.01.2004 schrieb FStruck um 18:36:
Am Mi, den 21.01.2004 schrieb Christian Nebl
what version of freevo are the debian packages you used? it should show
up in dselect.
Mike
On Wed, 2004-01-21 at 13:20, FStruck wrote:
Am Mi, den 21.01.2004 schrieb Michael Ruelle um 19:05:
This looks like a tvtime plugin issue. Currently the Tvtime plugin does
not use the new videogroups
try adding:
TV_VIEW_SIZE = (640, 480)
to your local_conf.py
Mike
On Wed, 2004-01-21 at 12:57, FStruck wrote:
Am Mi, den 21.01.2004 schrieb FStruck um 18:36:
Am Mi, den 21.01.2004 schrieb Christian Nebl um 18:25:
Hello Flo,
my settings are:
TV_SETTINGS = 'pal television
On Wed, 2004-01-21 at 22:50, Trevor Phillips wrote:
On Wednesday 21 January 2004 22:09, Matthieu Weber wrote:
I think an awesome feature would be able to record the contents of your
shopping cart if that plugin is installed, and have the shopping cart
display the total disk usage of
Check the weather plugin. I have found that is occasionally a major
cause of unresponsive UI.
Mike
On Mon, 2004-01-19 at 14:06, free vo wrote:
And right agin :) And thanks again
That leaves only the recording things to configure. I'll see about that in a
couple of days. Thanks for
I have used mkxvcd to make vcd's from my mpeg recordings. it should work
for avi's too. It works using mplayer and transcode. look for it on
freshmeat.net
--
Mike Ruelle
[EMAIL PROTECTED]
http://world.std.com/~mruelle/
On Sat, 2004-01-17 at 18:37, Justin T Wetherell wrote:
Anyone know any easy
I am the author of the radio plugin for freevo. I don't have a card to
test but others say it works fine. You are the second person to report a
problem tho. hmmm... I will do some debugging tomorrow. Calling radio -m
is supposed to mute the radio input of the card. That is what i do when
i get the
rpm -qpl freevo
will tell you where all the package files are supposed to go. If things
are built dynamically or done in a post install script, I am not sure
they appear in this list.
Mike
On Fri, 2004-01-09 at 15:09, Cameron Vetter wrote:
I know this is a really dumb question but I can't find
On Fri, 2004-01-09 at 15:52, Georg Knzel wrote:
Dear Mike,
what do you think about adding the following functions to the radio plugin:
- Detached audio similar do mplayer.audio (allows hiding the gui)
that sounds reasonable. it might be easy depends on what the
eventhandler has to catch
It is doable. It would have to be a daemonplugin with the event_listener
attribute set toTRUE. you could then track when events happened in an
eventhandler and then use the poll method of the dameonplugin to see
when the last event happened and call the screensaver if that value is
larger than
us the autogen script to make it html. If you run the freevo webserver,
it will shoowup in the help section afterwards.
to autogen do:
cd /usr/local/freevo
./autogen.sh howto
On Tue, 2003-12-23 at 15:52, Robert Rozman wrote:
Hi,
I'd like to print out Freevo's plugin writting howto. It's
can you send me your stationlist.xml?
I wrote the new tvtime plugin stuff and have never seen this before. It
would be nice to know what the parser is objecting to.
--
Mike Ruelle
[EMAIL PROTECTED]
http://world.std.com/~mruelle/
On Sat, 2003-12-06 at 17:44, Darrell wrote:
Hi
See this with
I will take a look. I just did a quick edit of something i thought was
obviously wrong. I didn't actually try to play a game after seeing that
things showed up. Will get on that later today.
On Wed, 2003-12-03 at 04:30, Dirk Meyer wrote:
Peter Svensson wrote:
new_items += cwd(parent,
fixed. tested snes and mame. I fixed genesis to match but don't use it
so it should work in theory but is untested.
On Wed, 2003-12-03 at 04:30, Dirk Meyer wrote:
Peter Svensson wrote:
new_items += cwd(parent, new_files)
NameError: global name 'cwd' is not defined
Oops. I needed to
.
- Original Message -
From: Michael Ruelle [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, November 26, 2003 2:14 AM
Subject: Re: [Freevo-users] tvtime: slave mode remote control problem
use the freevo key bindings.
c and v for ch+ and ch
make sure it starts in the first column. Python is very picky about
spaces. So all you lines should start with the variable name and no
spaces in the columns before it. This is a common problem when you only
delete the comment character and not the space after it when editing
local_conf.py.
Mike
Check cvs. The script had a bug for ntsc users. I checked in a fix a
couple days ago.
Mike
On Thu, 2003-11-27 at 23:03, Joe Stump wrote:
Check out the OSD_SDL_EXEC_AFTER_STARTUP variable (may be spelled
differently, but you get the picture) in your local_config.py file. I had
some serious
ok looks like wma is not in the extension list for python. I thought the
thing was supposed to come back application/octet which all browsers are
supposed to know means download this thing binary.
Mike
On Wed, 2003-11-26 at 12:23, Justin T Wetherell wrote:
When I click download on an avi file
use the freevo key bindings.
c and v for ch+ and ch-
you can also use 0-9 to change channels
you can also use prev_chan (if you have a remote button set to it) to
switch to prev_chan when doing manual tuning.
Mike
On Tue, 2003-11-25 at 20:01, Robert Rozman wrote:
Hello,
I'm trying to use
On Sunday 23 November 2003 01:08, Joe Stump wrote:
1.) Anyone out there using any decent USB gamepads?
I got a decent usb joypad from compgeeks for cheap. THe only thing I have
noticed with usb gamepads is that the up/down/left/right thumb pad isn't
always guarenteed to be on the first set of
Yes you can use xmame.sdl.
Mike
On Sat, 2003-11-22 at 11:19, Joe Stump wrote:
This is a side question: can you play games if you run from the fbdev? I
use mga and not x11 of any sort.
--Joe
Well i run xmame like this
DIR_GAMES = [ ('MAME', '/media/games/roms',
Try setting USER and HOME in your start script on Debian.
I have had issues with that in the past. Also i find i need to have
numlock set before starting freevo for the keyboard to work as well.
Mike
On Sat, 2003-11-22 at 11:22, Joe Stump wrote:
Yeah, I read everything. Freevo plays DVD's and
I believe passwords can only contain numbers to help our friends using
passwords with remotes.
Mike
On Sun, 2003-11-16 at 22:54, Chris Graham wrote:
passwords do not work using 1.4rc4
I created the '.password' in the directory that i wanted to protect and put
my password
in the file in
On Sun, 2003-11-16 at 05:01, Dirk Meyer wrote:
In the main log, there is the repeated message Found it like a
hundred times in a row.
That looks like tvtime. Mike, do you still need this?
crap no i thought i had commented those out. I wanted to change them to
a more informative error
Are you running as root? i have seen people have problems with runapp trying
to set negative nice numbers if they aren't root(which is not allowed on
linux). It tends to set the nice to a positive number instead and actually
degrades performance.
As for DVD's are you setting in local_conf.py:
There is a radio plugin called audio.radio. It depends on the command
line radio program. See its plugin help using the freevo command on the
command line.
On Wed, 2003-10-29 at 10:22, Sala Pavel wrote:
Hi,
sorry to ask, but I have went through all the descriptions and forum
post still I
I have never gotten my ATI TV WOnder VE to use btaudio and I have major
channel tunning issues with vertical fuzz lines through picture on high
number channels (40). I have since purchase a wintv pvr250 and it
doesn't have this tuner issue.
--
Mike Ruelle
[EMAIL PROTECTED]
, Michael Ruelle [EMAIL PROTECTED] wrote:
Make sure you are setting the recording input right. By default it is set
to
micin. You have to change it to linein. You can do that with a '-i R' or
'-l
R' in addition to turning on audio with a '-i 80' or '-l 80'
You cannot combine
Make sure you are setting the recording input right. By default it is set to
micin. You have to change it to linein. You can do that with a '-i R' or '-l
R' in addition to turning on audio with a '-i 80' or '-l 80'
You cannot combine the two into one. so you must do something like
'aumix -i 80
Yeah just did. i was looking for this email to respond too. Dischi beat
me to it i guess.
--
Mike Ruelle
[EMAIL PROTECTED]
http://world.std.com/~mruelle/
On Tue, 2003-10-14 at 14:03, Dirk Meyer wrote:
[EMAIL PROTECTED] wrote:
I am trying to send commands to freevo via udp... it crashes both
it is defined in freevo.conf
--
Mike Ruelle
[EMAIL PROTECTED]
http://world.std.com/~mruelle/
On Sunday 12 October 2003 12:42, Robert Rozman wrote:
Hello,
I'm playing with Freevo under win32 and according to Christophe
instructions I could get Image and Audio working. Now I'm playing with
Just to butt in a little bit. once you get your comic strip plugin done. I
would be interested in helping you extend it to something like the headlines
plugin where you put a list of places to grab the comics from.
--
Mike Ruelle
[EMAIL PROTECTED]
http://world.std.com/~mruelle/
On Sunday 12
A good Point. Dischi can you add this to the list? It is probably a good
thing to add to warn users the DIR_GAMES entry has changed.
--
Mike Ruelle
[EMAIL PROTECTED]
http://world.std.com/~mruelle/
On Sun, 2003-10-05 at 14:24, Sylvain FABRE wrote:
In tha changes, it seems that you forget the
This definitely won't work in our tvtime plugin. We don't set the right stuff
for it to work. it is on my todo list for it. It should be working for
mplayer. The mplayer plugin has the concept of 'vcr' mode where you connect
your vcr video to composite in and your vcr audio to mic in. not sure
http://www.mame.net/downmisc.html
there are three games at the bottom. they are not GPL and one seems to
be unclaimed. So the uinclaimed one we might be able to add to testfiles
and the robby.zip we should be distributable too. We can probably get
away with the other one but anyone building a
/freevo/testfiles/Psx',
('GENERIC', '/usr/local/psx/epsxe', '', '', '.bin' ))]
Thanks for any help,
/Peter
-Ursprungligt meddelande-
Frn: Michael Ruelle
Till: [EMAIL PROTECTED]
Skickat: 2003-09-28 20:58
mne: Re: [Freevo-users] DIR_GAMES problems continued
For now try running the webserver using the boot or init scripts rather
than as a plugin. Does this problem still occur?
--
Mike Ruelle
[EMAIL PROTECTED]
http://world.std.com/~mruelle/
On Tue, 2003-09-30 at 21:24, Thomas Kranz wrote:
So that's the problem: it seems that the dxr3 output and the
please post you DIR_GAMES.
I will look at it
but ideally it should be
DIR_GAMES = [('name in menu','directory',( ... generic stuff ... )) ]
I think you are missing the parens around the third entry and thus not
passing the test.
--
Mike Ruelle
[EMAIL PROTECTED]
http://world.std.com/~mruelle/
I have to agree they aren't terribly user friendly. I have worked on
other projects that use xml configs and generally you have to build an
in process editor if you go that route because users never remember the
XML escaping rules.
Also you generally end up having order be important if you use a
Read freevo_config.py there is a new GAMES_DIR layout. You are missing
the new element that provides support for a GENERIC games type which may
just allow you nerw emulator to be integrated with only a little bit of
config editing.
Mike Ruelle
On Thu, 2003-09-25 at 00:51, Peter Svensson wrote:
I used to use this card in the past. You can't get btaudio to work on
it. To do recording I had to make my own script that muted and unmuted
the linein on my sound card while recording. This also meant freevo
could not be used for other things while recording with this card. I
still have the
,
Greg
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Michael
Ruelle
Sent: Monday, September 15, 2003 9:14 AM
To: [EMAIL PROTECTED]
Subject: RE: [Freevo-users] Problem Recording Sound
I used to use this card in the past. You can't get btaudio
The DIR_GAMES setup has changed in freevo cvs. have you updated your
DIR_GAMES variable to match the new setup?
Mike
On Mon, 2003-09-15 at 17:18, Bart Heremans wrote:
Hi,
I emerged the newest freevo-snapshot and get this erro when entering a
directory with mame roms in the freevo game menu
Rohbags,
On Tue, 2003-09-09 at 01:02, Roh . wrote:
On Friday 05 September 2003 07:17, Pferdekaemper, Thorsten wrote:
3. The listings contain a Tag like rating system=FSK16/rating. It seems
that freevo has a problem with that. I deleted the handling of this tag in
epg_xmltv.py to make this
On Friday 05 September 2003 07:17, Pferdekaemper, Thorsten wrote:
3. The listings contain a Tag like rating system=FSK16/rating. It seems
that freevo has a problem with that. I deleted the handling of this tag in
epg_xmltv.py to make this work. (freevo does not seem to display the rating
does /media/cdrom exist on the SuSE box? That is not a dir created by
default. make sure it is there. one of the things automounters do is
automatically create dirs they use. make sure the dir you put in
/etc/fstab exists and that you can mount and unmount discs from it. if
you can than freevo
use plugin.activate('idlebar') not the old command in your local_conf.py
from a previous version.
Mike
On Wed, 2003-09-03 at 19:12, Alec - Freevo wrote:
Hello again,
As i said in the subject, the idlebar plugin failed to load with the
latest snapshot (03 sept 2003) although with the same
You need to change:
TV_CHANNELS = [('8 WDKY', 'WDKY', '8'),
('9 WLEX', 'WLEX', '9'),
to:
TV_CHANNELS = [('C8wlex.zap2it.com', 'WDKY', '8'),
('C9twc.zap2it.com', 'WLEX', '9'),
and do likewise for all your stations.
--
Mike Ruelle
[EMAIL PROTECTED]
http://world.std.com/~mruelle/
On Sat,
you should also remove /var/cache/freevo/TV.xml-0.pickled or
/tmp/freevo/cache/TV.xml-0.pickled
if they exist after changing your TV_CHANNELS variable.
On Sat, 2003-08-30 at 14:30, Michael Ruelle wrote:
You need to change:
TV_CHANNELS = [('8 WDKY', 'WDKY', '8'),
('9 WLEX', 'WLEX', '9
it should be in src/audio/plugins/
On Fri, 2003-08-29 at 12:10, Bernhard wrote:
Hi,
According to the documentation I tried to use the webradio plugin. However,
it
doesn't function because of this error:
---
failed to load
Yeah i just checked for right now this is cvs only.
Mike
On Fri, 2003-08-29 at 13:21, Berni wrote:
I'm using the gentoo ebuild Verson of freevo (which created freevo
1.3.4) and there isn't a webradio.py in src/audio/plugins . I've
also downloaded this file:
in the freevo boot script you need to set the USER environment variable. You
may also need to set the HOME variable as well. I usually add these three
lines after the line starting with DESC:
USER=root
HOME=/root/
export USER HOME
--
Mike Ruelle
[EMAIL PROTECTED]
I have a ATI TV WONDER VE. I would reccomend against it. I can't get btaudio
to work, and i have large fuzz bars on tv stations b/t 36 and 75. I have
regular cable and don;t need a tv convertor box. Also two channels won't tune
at all even though they appear on my regular tv. Also i believe
The original problem is most likely an http error. the error printed out isn't
specific. it could also be that it genuinely couldn't read the file. Either
could be true.
to answer the second question. you can do something like this:
plugin.activate('idlebar.weather', level=30, args=('KBOS','F',
On Sun, 2003-08-03 at 17:30, Robert Winder wrote:
And is there any usage documentation about the icecast plugin, somewhere ?.
It's not documented in the plugin itself. It fails on me when i
activate it.
This info is now on the documentation page of wiki, Go to
http://freevo.sourceforge.net/
This happens on and off with sourceforge cvs. THis is the last dir in
freevo and it is empty. The checkout can be ctrl-c'd there and nothing
bad will happen. I have this happen often when i checkout a new freevo
or do a cvs update.
On Mon, 2003-07-28 at 17:02, christopher neitzert wrote:
Is
http://world.std.com/~mruelle/pub/freevo/commands.py
it should be added to freevo soon.
please note there is no way to send args to the program. it must be able
to be run with no command line parameters.
install instructions:
- designate a freevo commands directory to run arbitrary commands
I use the standard mga framebuffer. but thought vtrelease might help you too.
--
Mike Ruelle
[EMAIL PROTECTED]
http://world.std.com/~mruelle/
On Friday 25 July 2003 18:04, Markus Schneider wrote:
Hello Michael,
Michael Ruelle schrieb:
On Friday 25 July 2003 16:48, Markus Schneider wrote
if the user is using the mencoder from the 1.3.2 binary release of
freevo. remove 'on:' from the front of the tv options parameter and just
add a tv:// at the end of the command.
--
Mike Ruelle
[EMAIL PROTECTED]
http://world.std.com/~mruelle/
On Wed, 2003-07-09 at 09:57, Aubin Paul wrote:
are you using the provided Freevo init script? it sets
SDL_NOKEYBOARD=true so that your keyboard won't work while freevo is
running.
--
Mike Ruelle
[EMAIL PROTECTED]
http://world.std.com/~mruelle/
On Sat, 2003-06-28 at 05:42, Rudi Lindl wrote:
hi,
i just configured freevo to load and
I was looking for some help. In the past I had not been using btaudio
instead using the line input from sound card. Since the new cvs and the
pre2 stuff seemed to prefer doing things this way, I thought I should
attempt to get this etup on my system. So far I have either failed to
record using
I take it you found the wiki documentation lacking? You can help improve
it. THere is a small ilnk at the bottom which ordinary users can use to
help improve the documentation.
I think one of the problems freevo suffers from is the general driver
problem. I was lucky in that I found this project
lircrc is not the same as /etc/lircd.conf
there unfortuneately any real documentation on it yet. I went through
the old steps of creating a remote.py so I can run the convertor script
in the helpers directory.
In general the file is a translation table to convert stuff from your
/etc/lircd.conf
at 11:29, Alan Murrell wrote:
Hi Mike,
--- Michael Ruelle [EMAIL PROTECTED] wrote:
ps -ef | grep lircd
is your lirc daemon running?
lircd --driver=default --device=/dev/lirc/serial
It runs from the '/etc/init.d/lircd' script.
The '--driver=default' portion I am not 100% certain
check the settings of the audio variables in freevo_config.py Look at
the entire set of them. I have all mine set to 80 and it works well. I
also have a ATI tv wonder VE card but am using it with a SBlive gamer
soundcard though. It's the simplest thing to check first. Freevo likes
to play with the
95 matches
Mail list logo
