As Ingo B. pointed out, i had to change CFLAGS in make.conf to -O2, emerge
lame and restore CFLAGS to the old values.
Is it worth to create a bug report out of this?
Regard, Tim Ruehsen
Am Montag, 10. März 2003 15:48 schrieb Tim Ruehsen:
Hi,
i am about to install V1.4 RC3 on a AMD k6-2
If you haven't already tried it, Ogle is an excellent dvd player that
I've had success with back when i used Slackware.
gabriel wrote:
problem 2.
i just went out and bought babylon 5 season 1 on dvd. discs 1 and 2 play
well in mplayer (well, the audio sync needed adjusting and there were
I've noticed that Mozilla 1.2.1 doesn't actually do anything. Start it up from
the menu, it gives the endlessly pulsating cursor of Mozillaness, but this
soon ends and suddenly, nothing more happens. At all.
Not that I've missed it one iota - I've been using Knode KMail instead, and
Konqueror
Well i have never had good results in xine, tho i have used mplayer for a long time and never had a problem at all, note i said mplayer and not gmplayer. i only drop frames when i'm compiling and playing at the same time, your specs should be fine... i would look at the tweaking section on
On Tuesday 11 March 2003 11:09, Ian Tindale wrote:
I've noticed that Mozilla 1.2.1 doesn't actually do anything. Start it up
from the menu, it gives the endlessly pulsating cursor of Mozillaness, but
this soon ends and suddenly, nothing more happens. At all.
Run it from console and see errors
well sence the newest version of xfree when i try and run mozilla, from within screen at a console it just returns to a prompt, after a lil investigation, i noticed it was actualy getting rejected bu the xserver, i still havn't figured out why, what i'm doing is just opening up a new console
IIRC this might be something that's fixed in a later BIOS, check out the IBM
site for support on your model.
Also, I've found this site a mine of information on Linux and Thinkpads
(though it is focused on Debian):
http://panopticon.csustan.edu/thood/tp600lnx.htm
BTW, I'm running Gentoo
On Tuesday 11 March 2003 9:20 am, Voicu Liviu wrote:
Run it from console and see errors (if any)
Tried that too - nothing. Not even the mozilling cursor. Just goes on to the
next prompt silently.
--
Ian Tindale
--
[EMAIL PROTECTED] mailing list
also you might try: killall -9 mozilla-bin and killall -9 mozilla, then try and start it back up
--
Nicholas Hockey (Tilt) [EMAIL PROTECTED]
Unix Administrator
Encrypted E-Mail is preferred..
GnuPG KeyID 4EDE2B84
Key
Arker wrote:
On March 10, 2003 03:51 pm, MAL wrote:
Since starting to use Gentoo, (pre-1.1), I have randomly had fonts in
Mozilla come out... er.. squished :)
Edit - Preferences - Appearance - Fonts. Set 'Display resolution' to
96dpi.
[...]
Let me know if this helps... If not, I'll dig
Ok. It's out for testing now. It fixes some issues with cvs-src and
ccache in particular. It's mostly fixes but also has flag-o-matic
and a few small chunks of eutils in it. etc-update now has an option
to merge all remaining files without prompting. With those being the
exceptions, everything
Thanks,
it works, i needed just the line to /etc/modules.autoload to get it work.
Patrick
[EMAIL PROTECTED] wrote:
Patrick Marquetecken said:
I cant get my pcmcia card working. I have followd a thread on this list
how to configure it.
I have it set up right now. It seems to engage for an ebuild like grub but not
for one like kdebase. Is this expected?
Also, in the current HOWTO, there is no mention of using a make -jx flag,
where x might be 4. For a two computer system, should this be set, and if so
where?
Thanks for the
Hi,
im trying to install my video card of my laptop.
I have done a emerge nvidia-glx and nvidia-kernel, updates /etc/modules.autoload with
NVdriver, but at boot time the driver is not looded.
Dmesg error: nvidia: 10de:0187 - unknown PCI id
nvidia: no NVIDIA graphics adaptor found.
Martin is right .. this is 99% chance it is framebuffer support. The
nvidia driver and the framebuffer do not work at the same time. (this is
documented by nvidia). So, if you have the framebuffer buildt as a
module, remove it from your autoload; or remove it from your kernel
configuration.
Patrick Marquetecken said:
im trying to install my video card of my laptop.
I have done a emerge nvidia-glx and nvidia-kernel, updates
/etc/modules.autoload with NVdriver, but at boot time the driver is not
looded. Dmesg error: nvidia: 10de:0187 - unknown PCI id
nvidia: no NVIDIA
On Monday 10 March 2003 15:22, Matthew Daubenspeck wrote:
On Mon, Mar 10, 2003 at 09:17:03AM -0500, Jeffrey Hood wrote:
None of them show N... actually, other than a few r's and s's, none of
them show anything... and only messages in the subfolders are showing...
I have quite a few in
On Tuesday 11 March 2003 06:03, Carl Hudkins wrote:
[1] Yeah, I know some folks will think the graphics card is a weak link in
some way... but Linux has been my main helper in getting the most out of
my hardware over the years, and until I have some *need* for accelerated
3D
Sorry for the automatic response thing last night.. I was working on a
PHP script that handles automatic message replies and I forgot to turn
it off before I left for the day.. I will be much careful next time.
-- Keith
--
[EMAIL PROTECTED] mailing list
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 11 March 2003 07:43, Norberto BENSA wrote:
Mar 11 03:32:04 [kernel] FDC 0 is a post-1991 82077
Mar 11 03:32:04 [modprobe] modprobe: Can't locate module fd[0-1]* which is
needed for /dev/fd[0-1]*
Mar 11 03:32:04 [modprobe] modprobe:
Hello,
I want to use ext3 acls and I was wondering, how are they supported by
gentoo ? I was reading that I need a modified version of fileutils and
fsck support ? Are they already in gentoo or do I have to install
something else ? Also, is there an ebuild for acl utils ?
Thanks...
--
[EMAIL
What is the procedure for emerging galeon-1.2.8
using mozilla-1.3_beta? Running the emerge
command gives me:
-
# emerge --buildpkg --usepkg -uvp =net-www/galeon-1.2.8
These are the packages that I would merge, in order:
Calculating dependencies
Try loading the i82365 module before ds.
On Tuesday 11 March 2003 00:31, Patrick Marquetecken wrote:
Hi,
I cant get my pcmcia card working. I have followd a thread on this list how
to configure it. At first i had enabled pcmcia in the kernel, so i disabled
pcmcia in the kernel, recompiled
Hi,
i can see xfree-4.3.0-r1.ebuild in my portage dir but how do i install
it?
Patrick
--
Knowledge in a databank,is like food which is in a deepfreeze.
Nothing comes out better than what is initially put in.
PGP Key: http://users.pandora.be/rivendell/marquetp.gpg
Registered Linux User #44550
--Original Message-
-From: Stephen Boulet [mailto:[EMAIL PROTECTED]
-Sent: Tuesday, March 11, 2003 8:32 AM
-To: [EMAIL PROTECTED]
-Subject: Re: [gentoo-user] Setting up distcc
-
-
-I have it set up right now. It seems to engage for an ebuild like
-grub but not
-for one like kdebase. Is
Depends on how it's masked. you could try the following:
ACCEPT_KEYWORDS=~x86 emerge --buildpkg -uvp net-www/galeon
or, if it's not masked by ~x86, do:
cat /usr/portage/profiles/package.mask |grep galeon
then comment it out if it's there.
also, sometimes emerging the ebuild directly will
thankyou
_
MSN Hotmail .
http://loginnet.passport.com/login.srf?id=2svc=mailcbid=24325msppjph=1lc=1042
--
[EMAIL PROTECTED] mailing list
you might also try to emerge blackdown by itself, then
emerge --nodeps net-www/galeon-1.2.8
not sure if that would work, though
Craig
On Tue, 11 Mar 2003 17:23:04 - (GMT)
Dhruba Bandopadhyay [EMAIL PROTECTED] wrote:
What is the procedure for emerging galeon-1.2.8
using
Hey All,
According to the Linksys website I need to use the Tulip driver for my
LNE100TX NIC. That said it won't load when I boot off the 3Stages RC3 CD.
When I try to modprobe or insmod the tulip driver I get...
PCI: Unable to reserve I/O region #1:[EMAIL PROTECTED] for device 00:14.0
PCI:
First things first, disable the plug and play option in the bios, then retry. That
setting helps in windows, but historically (not necessarily recently) I've had
problems with it while running slackware. I'm definitely not confident here, and
someone more knowledgeable is welcome to jump in,
That should be ~x86
-Mark
On Tuesday 11 March 2003 12:52 pm, brett holcomb wrote:
Try ACCEPT=~x6; emerge xfree-4.3.0-r1
On 11 Mar 2003 18:45:08 +
Patrick Marquetecken [EMAIL PROTECTED]
wrote:
Hi,
i can see xfree-4.3.0-r1.ebuild in my portage dir but how
do i install
it?
On Tue, Mar 11, 2003 at 08:12:42PM +, Patrick Marquetecken wrote:
I'm already having problems with my nvidia card and was wondering whats
next.
Is gentoo such a difficult distro, or is my knowledge to little?
It would help if you could describe the problem a little better :)
--
[EMAIL
On Tuesday 11 March 2003 15:12, Patrick Marquetecken wrote:
Hi,
I'm now almost 2 weeks trying to install Gentoo 1.4_r3.
I work with other distro's for a few years now, and these two weeks
make me feel like a idiot.
A redhat or suse distro i can install within ours.
It took me a few days to
I have had no issues,
athlon 900mhz, geforce2ultra, ide hard drives, fluxbox wm, etc etc. I play
quake3 on it etc.
I would recommend saying what the specific issues are, I'm sure we can help.
kev
--Original Message-
-From: Patrick Marquetecken [mailto:[EMAIL PROTECTED]
-Sent: Tuesday,
On Tuesday 11 March 2003 14:41, Ernie Schroder wrote:
On Tuesday 11 March 2003 15:12, Patrick Marquetecken wrote:
Hi,
I'm now almost 2 weeks trying to install Gentoo 1.4_r3.
I work with other distro's for a few years now, and these two weeks
make me feel like a idiot.
A redhat or suse
Greeting I am tryiong to create my onw live cd all is going well until I
run initrd and it asks for gcloop. I cannot find this tar ball anywhere,
even after googling any help would be greatly appreciated.
Thank you,
Stephen Domorod
--
[EMAIL PROTECTED] mailing list
I have followed the instruction of the Desktop installation Guide.
without my nvidia card i have a 320X200 screen if a start X.
emerge nvidia-glx
emerge nvidia-kernel
echo NVdriver /etc/modules.autoload
modified the /etc/X11/XF86Config according to the guide.
If i reboot there is a message
Howdy, gentle penguins and penguinettes,
Okay, so I've been having emerge -up issues for a few days now. Here's
the matter:
[EMAIL PROTECTED] ~ % emerge -up world
These are the packages that I would merge, in order:
Calculating world dependencies -
aux_get(): (3) Error in
On Tuesday 11 March 2003 21:12, Patrick Marquetecken wrote:
Hi,
I'm now almost 2 weeks trying to install Gentoo 1.4_r3.
I work with other distro's for a few years now, and these two weeks make
me feel like a idiot.
A redhat or suse distro i can install within ours.
It took me a few days to
hi,
ive just installed gentoo rc3, emerged and started
xfree, i also emerged fluxbox, but it can not start.
the output is:
Basedisplay:Basedisplay connection to xserver
failed
what is the problem?
tnx
VR
Patrick Marquetecken [EMAIL PROTECTED] writes:
Hi,
I'm now almost 2 weeks trying to install Gentoo 1.4_r3.
I work with other distro's for a few years now, and these two weeks make
me feel like a idiot.
A redhat or suse distro i can install within ours.
The problem here is knowledge you
Hello list,
I'm having difficulty making sense of the following exchange between my computer and I:
localhost root # emerge rsync
snip /
Updating Portage cache... ...done!
* An update to portage is available. It is _highly_ recommended
* that you update portage now,
On Tuesday 11 March 2003 15:11, [EMAIL PROTECTED] wrote:
Hello list,
I'm having difficulty making sense of the following exchange between
my computer and I:
localhost root # emerge rsync
snip /
Updating Portage cache... ...done!
* An update to portage is
On Tue, 2003-03-11 at 21:47, Patrick Marquetecken wrote:
emerge nvidia-glx
emerge nvidia-kernel
echo NVdriver /etc/modules.autoload
modified the /etc/X11/XF86Config according to the guide.
If i reboot there is a message that the NVdriver is not loaded.
dmesg shows following error
--Original Message-
-From: Patrick Marquetecken [mailto:[EMAIL PROTECTED]
-Sent: Tuesday, March 11, 2003 3:47 PM
-To: Gentoo
-Subject: Re: [gentoo-user] Installing Gentoo - going mad
-
-
-I have followed the instruction of the Desktop installation Guide.
-without my nvidia card i have a
My kids are getting to the point where they need internet access. Thay are
supervised to the best of our ability but I would like a content filtering
system, There are several for windoze type apps, what about Linux? I really
don't have an extra machine to set up squid/squidguard.
Mike
--
Looks like you dont have an nvidia card in the system. What card do you think you have
in there?
Chris
---Original Message---
From: Patrick Marquetecken [EMAIL PROTECTED]
Sent: 03/11/03 02:47 PM
To: Gentoo [EMAIL PROTECTED]
Subject: Re: [gentoo-user] Installing Gentoo - going mad
I
On Tue, 11 Mar 2003, Michael W. Holdeman wrote:
My kids are getting to the point where they need internet access. Thay are
supervised to the best of our ability but I would like a content filtering
system, There are several for windoze type apps, what about Linux? I really
don't have an
On Tuesday 11 March 2003 15:28, Brian Reichholf wrote:
On Tue, 2003-03-11 at 21:47, Patrick Marquetecken wrote:
emerge nvidia-glx
emerge nvidia-kernel
echo NVdriver /etc/modules.autoload
modified the /etc/X11/XF86Config according to the guide.
If i reboot there is a message that
On March 11, 2003 03:57 pm, A. Craig West wrote:
On Tue, 11 Mar 2003, Michael W. Holdeman wrote:
My kids are getting to the point where they need internet access. Thay
are supervised to the best of our ability but I would like a content
filtering system, There are several for windoze type
You're right - I did it from memory!
On Tue, 11 Mar 2003 14:48:36 -0500
Mark A Basil [EMAIL PROTECTED] wrote:
Actually, it should be
ACCEPT_KEYWORDS=~x86
Sorry I missed that before.
On Tuesday 11 March 2003 12:52 pm, brett holcomb wrote:
Try ACCEPT=~x6; emerge xfree-4.3.0-r1
On 11 Mar 2003
Create a file named .xinitrc in your home directory and put the phrase
exec fluxbox (w/o quotes) into it. Then launch xfree (startx
command). Here's a rundown of the commands.
---code---
echo exec fluxbox ~/.xinitrc
startx
---/code---
Hope this helps :)
-Jon GenKiller Gaudette
On Tue,
Howdy all,
I'm tired of my iptables logs filling up my dmesg. I see that there is
a --log-level option in iptables, but I'm not sure if this will help. I
believe I've read somewhere that iptables logs as kernel facility unless
you recompile it.
What I'd like to do is have my
On Tue, 2003-03-11 at 22:05, Ernie Schroder wrote:
nvidia-*-4191 are still masked, I believe, NVdriver is still correct for
the standard drivers. Using the 4191 drivers requires other maskes
packages to be installed such as:
gcc-3.2.2-r1 [3.2.1-r6]
glibc-2.3.2 [2.3.1-r2]
xfree-4.3.0-r1
Or more correctly - knowledge they DON'T have. I've run
Caldera and RH and they hide it all under GUI admin stuff
and point and click. Unless you make a real effort to not
use the GUI stuff and learn you never really know what is
happening behind the GUI and hence don't have a real
I just set up a new box that is running well and would like to take this
box and run all ~x86 stuff. Before I do that, I'd like to move all my
email and my kmail configuration (folders, filters settings etc) over
to the new box. If possible, I'd like to have normal access to all of
my old
On Tuesday 11 March 2003 16:16, brett holcomb wrote:
Or more correctly - knowledge they DON'T have. I've run
Caldera and RH and they hide it all under GUI admin stuff
and point and click. Unless you make a real effort to not
use the GUI stuff and learn you never really know what is
Thanks for the suggestion. After setting up ALSA (and following your
suggestion that I 'unmute everything and crank the volume') I can play
sounds using aplay.
However, Gnome still can't play sounds. I have alsa support in my USE
line in make.conf.
Any ideas?
- PK
Lee Harr wrote:
I just
I like that - my dumb questions are smarter, too.
On Tue, 11 Mar 2003 16:33:24 -0500
Ernie Schroder [EMAIL PROTECTED] wrote:
On Tuesday 11 March 2003 16:16, brett holcomb wrote:
Damn good point Brett. I've been playing with Linux for
3+ years. I did
my first Gentoo install in late December
what i would do is set up the machine yah currently have with nis/nfs and mount nfs homedirs, this also makes it so yah dun have to have all different password files, etc. that is what i do anyways, i did this back when i was first building my home network and it has saved my ass repetedly, i
On Tue, 11 Mar 2003 16:06:40 -0500
gabriel [EMAIL PROTECTED] wrote:
i'd have to agree with craig on this one. stopping kids from doing
something is just encouraging them to find a way around the blockage.
the best thing you can do is talk to them and help them understand
what's out there.
same thing here, got the e-mail, did a sync, said it could be upgraded, did a emerge -up to see if there was anything else, and it showed nothing, also saince the last couple versions or the portage, i have nioticed serious slowdowns after the sync (the: Updating Portage cache... part) this
I'm having the following warning whenever I try to burn CDs as a normal
user with app-cdr/cdrtools-2.0 but not as root, and the user is a member
of the group cdrw. The CD burns fine but it looks like theres still a
problem somewhere with the permissions.
cdrecord: Operation not permitted. WARNING:
same thing here, i fixed it by removing the whole gtk+1.2 dir then emerge sync, then emerging the package that relys oon the gtk+ package (can't remember what one now) then doing an emerge -u world, i don't now what one of those steps fixed it, but it worked.
--
Nicholas Hockey (Tilt)
I've noticed this in my introductory computer class @ college, the
people that raised their hands up the first day of class when asked
who had prior knowledge and computer background are the people that
are getting c's and b's on their tests and quizes.
I think it's known as a superiority
On 20:58 Tue 11 Mar , Sundance wrote:
Howdy, gentle penguins and penguinettes,
Okay, so I've been having emerge -up issues for a few days now. Here's
the matter:
[EMAIL PROTECTED] ~ % emerge -up world
These are the packages that I would merge, in order:
Calculating world
I am using Eterm and each time I run Eterm I must increase the font size four times.
This is a pain.
Does anyone know what command line options or theme.cfg options I can set to do this
automatically?
Thanks,
Devi0s
--
[EMAIL PROTECTED] mailing list
Understood and agreed, However if I can eliminate 90% of the accidental
thisng that pop up on teh screen for my kids, why not? Example
www.whitehouse.com, one of my kids (8 yr. old) was working on a project for
school, I was with her, and it was too late to stop her and have her change
to
Title: Rhythmbox and xscreensaver ebuilds
Hi All,
First of all I am trying to build a Gnome/GTK 2.2 system using ONLY GTK2.2 ebuilds. I have come up with two snags though. The first one is xscreensaver. With a normal emerge, it installs openmotif as the toolkit for xscreensaver. How do I
On Tue, 11 Mar 2003 13:58:13 -0800
Alan [EMAIL PROTECTED] wrote:
While I agree, I think there is also a preventative aspect as well, as
I've seen some pretty rude banner ads, and while I agree that pretty
Fix for that is have the kids use mozilla and install bannerblind or
adblock and they
On Tue, 11 Mar 2003 14:53:21 -0800, Susie [EMAIL PROTECTED] wrote:
Sorry for the top post, but I've missed most of the conversation. I'm only
posting now because I've seen this all before just recently. This was
actually discussed AT LENGTH on the openbsd misc mailing list just
recently.
even though this list perhaps shouldn't be used for a discussion like
this i'll gladly add my opinion. though this time, from a child's
point of view (since i've almost been through that beeing 18 now).
i must say that i do agree with all of you're opinion.
isn't it generally almost a fact, that
On Thu, Mar 06, 2003 at 04:00:57PM -0500, [EMAIL PROTECTED] wrote:
Still not a good thing. There could be some new option in the config
file that needs setting. Anyway, with the exception of the XFree
True, but that is not relevant to the very reasonable notion that
default config files that
Ok, I have followed the steps to get the Sun's java to work with
Mozilla. No go. I followed the step by step to get Blackdown working,
no go. I have managed to get Moz 1.2.1 to see a java plugin, but it
dies (exits right away) when I go to a page with java. To get Moz to
see it, I had to
On Tue, 11 Mar 2003 18:49:28 -0500
Don Smith [EMAIL PROTECTED] wrote:
Ok, I have followed the steps to get the Sun's java to work with
Mozilla. No go. I followed the step by step to get Blackdown working,
no go. I have managed to get Moz 1.2.1 to see a java plugin, but it
dies (exits
Don Smith wrote:
Ideas?
None - I am starting to get a little irritated by it now. I have tried
blakdown 1.3.1,1.4.1 sun j2sdk 1.4.1, jdk 1.4.1 and others, all with no
sucess (although they work fine in phoenix-bin).
Just remove the symbolic link to stop it crashing and load phoenix when you
Richard Revis wrote:
Don Smith wrote:
Ideas?
None - I am starting to get a little irritated by it now. I have tried
blakdown 1.3.1,1.4.1 sun j2sdk 1.4.1, jdk 1.4.1 and others, all with no
sucess (although they work fine in phoenix-bin).
Just remove the symbolic link to stop it crashing
On Tue, 11 Mar 2003 18:49:28 -0500
Don Smith [EMAIL PROTECTED] wrote:
Ok, I have followed the steps to get the Sun's java to work with
Mozilla. No go. I followed the step by step to get Blackdown
working, no go. I have managed to get Moz 1.2.1 to see a java plugin,
but it dies (exits
When I try to install MySQL, I get the following error.
mysql.o(.text+0x1cbd): In function `com_source(String*, char*)':
: undefined reference to `errno'
collect2: ld returned 1 exit status
make[2]: *** [mysql] Error 1
make[2]: Leaving directory
I found the descriptions posted so far a little ambiguous. So, I am
posting this as an example of a working configuration...
Note, it is important to different between sun-j2sdk and sun-jdk.
In particular, sun-jdk will not work with mozilla/galeon compiled under
gcc 3.2. But, sun-j2sdk will
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Is there any way to get support for windows media player 9 in linux. I
ask because I have a new baby cousin and there is a video that was
encoded with the WMP-9 codec. I would really like to see the video, but
so far it's a no go. BTW if you guys
On Tuesday 11 Mar 2003 20:27, Ben Sparks wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Is there any way to get support for windows media player 9 in linux. I
ask because I have a new baby cousin and there is a video that was
encoded with the WMP-9 codec. I would really like to see
Is there any way to get support for windows media player 9 in linux. I
ask because I have a new baby cousin and there is a video that was
encoded with the WMP-9 codec. I would really like to see the video, but
so far it's a no go. BTW if you guys want to see the video of my baby
cousin
Cant' give you a lead on your problem immediately but it might help to know
that I have used exactly the same card and the Tulip driver worked for me.
Come to think of it I used the 1.4rc2 set because I wanted and Athlon set up
with GRP.
Perhaps there is a problem with the rc3 set up; you
On Tue, 11 Mar 2003 13:29:52 -0800
Pat Kerwan [EMAIL PROTECTED] wrote:
Thanks for the suggestion. After setting up ALSA (and following your
suggestion that I 'unmute everything and crank the volume') I can play
sounds using aplay.
However, Gnome still can't play sounds. I have alsa
Help! I am installing rc3 and completed the stage 1 part without any
problems that I am aware of. When I did the emerge -p system, I got an
error (shown below), which indicates that one of my ebuild files
(/usr/portage/dev-libs/glib/glib-1.2.10-r5.ebuild) was corrupted. How do I
re-fetch
On Tue, 2003-03-11 at 20:44, Jeremy Schneider wrote:
Help! I am installing rc3 and completed the stage 1 part without any
problems that I am aware of. When I did the emerge -p system, I got an
error (shown below), which indicates that one of my ebuild files
Richard Revis wrote:
Don Smith wrote:
Ideas?
None - I am starting to get a little irritated by it now. I have tried
blakdown 1.3.1,1.4.1 sun j2sdk 1.4.1, jdk 1.4.1 and others, all with no
sucess (although they work fine in phoenix-bin).
Just remove the symbolic link to stop it crashing
I'm trying to install xine-ui on the new box and it's failing with:
fpic: install: error: cannot install `xineplug_inp_dvd.la' to a
directory not
ending in /usr/lib/xine/plugins/bin/sh ../../libtool-nofpic
--mode=install
/bin/install -c xineplug_inp_vcd.la
The same error is repeated for
Try this:
http://bugs.gentoo.org/show_bug.cgi?id=16841
Worked for me.
-Isaac
Ernie Schroder wrote:
I'm trying to install xine-ui on the new box and it's failing with:
fpic: install: error: cannot install `xineplug_inp_dvd.la' to a
directory not
ending in /usr/lib/xine/plugins/bin/sh
i emerged alsa-utils tried to use it and got an error, rebooted and still
got the error mixer attach default error the one im supposed to not
get. it seems like the alsa modules got lodded correctly, i even
tried the insmod method, tha didnt seem to work... any clues?
On Tuesday 11 March 2003 02:17 pm, Norberto BENSA wrote:
On Tuesday 11 March 2003 10:27 am, brett holcomb wrote:
Did you rebuild a kernel recently - or do something else?
It looks like it can't find any of your modules. What's
in /lib/modules/*?
Arghh. was devfsd-1.3.25-r2.
when connecting to rsync1.uk.gentoo.org via rsync, i get the following
message:
if you're not doing so alread, please consider compressing the connection
here by using rsync -z ; you can edit /usr/sbin/emerge (or /usr/bin/emerge in
newer versions of portage) to assert this
what is that?
* Matthew Gatto [EMAIL PROTECTED] [2003-03-11 18:30:19 -0500]:
Still not a good thing. There could be some new option in the config
file that needs setting. Anyway, with the exception of the XFree
True, but that is not relevant to the very reasonable notion that
default config files that
Hi all,
I'm trying to install gentoo on a Thinkpad laptop. I've go gentoo installed,
but when I boot it, it freezes after starting local.
It will boot into single user mode.
It locks up when I try to shutdown.
There is nothing in /etc/runleves/default/
Should I blow it away and start over,
* Kirtis Bakalarczyk [EMAIL PROTECTED] [2003-03-09 18:25:32 -0500]:
For what it's worth, 4.3-r1 is working fine w/ my Geforce 4 Ti4600 ...
of course 4.3 worked equally well.
Those of you having problems with xfree-4.3, there is a new build
(4.3-r1) I'm building it now. I couldn't
On Wed, 12 Mar 2003 00:13:24 -0500
gabriel [EMAIL PROTECTED] wrote:
when connecting to rsync1.uk.gentoo.org via rsync, i get the
following message:
if you're not doing so alread, please consider compressing the
connection here by using rsync -z ; you can edit /usr/sbin/emerge (or
The documentation with my computer.
RH 7.3 and Windows XP sees a nvidia Geforce4 488 Go card!
Christopher Krull [EMAIL PROTECTED] wrote:
Looks like you dont have an nvidia card in the system. What card do you think you
have in there?
On Tue, 11 Mar 2003 13:55:58 -0300
[EMAIL PROTECTED] wrote:
Hello.
How can someone emerge galeon-1.3.3. Trying
it on my system gives me
Simply emerge galeon-cvs
--
Of course the people don't want war. But after all, it's the leaders of the country
who determine the policy, and it's
Hi Richard,
Thanks for trying. :) But, I am still having problems.
I thought maybe the problem was with plugger overriding things, so I
pulled out plugger. I already have rpnp.so symbolically linked to
/opt/RealPlayer8/rpnp.so.
Specifically this is what happens:
mozilla embedded content
1 - 100 of 102 matches
Mail list logo