thats fine.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sat, Aug 31, 2019 at 2:15 AM Tim Krause wrote:
> Sorry, the plans are private.
> On Aug 30, 2019, at 4:25 AM, Tim Ziegler wrote:
>>
>> Tim do yo
es for
something.
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Richard Ellis
Sent: Saturday, 31 August 2019 6:31 PM
To: Legacy Ornamental Mills
Subject: Re: TK Reciprocater long curves
Tim
What a muddle this google site is
I was typing my message re DIAMOND and all of a su
27;ve seen plenty of Google products
disappear that had the life time of service that was unlimited. Oh well, it's
still working. Sent from Samsung tablet
Original message From: Richard Ellis
Date: 8/31/19 1:30 AM (GMT-08:00) To: Legacy Ornamental Mills
Subject: Re: TK
riginal message
> From: Richard Ellis >
> Date: 8/30/19 4:05 AM (GMT-08:00)
> To: Legacy Ornamental Mills >
>
> Subject: Re: TK Reciprocater long curves
>
> Hi Tim & Timothy
> All interesting stuff.
> When I did my latest as shown in the pic
> I measured th
Date: 8/31/19 12:58 AM (GMT-08:00) To: Legacy Ornamental Mills
Subject: Re: TK Reciprocater long
curves TimI think I have done all I want to at the present timeI started on
this WAVE caper to see if I could make DIAMOND shapes on the coat stand I was
making WHY it was our 60th
Tim
I think I have done all I want to at the present time
I started on this WAVE caper to see if I could make DIAMOND shapes on the
coat stand I was making WHY it was our 60th wedding
anniversary, Now I will have to think of what to do for the 70th one ??!!
Richard
On Saturday, Augus
Reciprocater long
curves Hi Tim & TimothyAll interesting stuff.When I did my latest as shown in
the pic I measured the distance of the wave peak to peak,, it was 2.5
inches.After doing the first three runs. I returned the carriage back to the
start by ( crank handle ) Then I wound the carriage forwa
I'm sitting in my lazyboy recliner right now and thinking about adding more
amplitude. It would be possible to increase the travel of the twist by
relocating the location of the connection on the index plate. So instead of
mounting the connecting arm on the 4" diameter, make a arm that extends t
Sorry, the plans are private.
On Aug 30, 2019, 4:25 AM, at 4:25 AM, Tim Ziegler wrote:
>Tim do you have scaled drawings of your wave attachment too?
>Based on all the info you guys are sharing we should be able
>to figure this out.
>
>Kind Regards,
>
>Timothy J. Ziegler
>Ziegler WoodWork & Spec
Tim do you have scaled drawings of your wave attachment too?
Based on all the info you guys are sharing we should be able
to figure this out.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Fri, Aug 30, 201
Hey thanks for that and good to see someone up at the same time as me. lol
I have a bunch of spindles to get done today on my lathe but if time
permits this evening I'm going
to start studying this more. Thanks for sharing.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th
Hi Tim & Timothy
All interesting stuff.
When I did my latest as shown in the pic
I measured the distance of the wave peak to peak,, it was 2.5 inches.
After doing the first three runs. I returned the carriage back to the start
by ( crank handle ) Then I wound the carriage forward 6 turns of the c
Seeing all this Wave, now I'm going to have to figure out how to do that.
And of course build the attachment.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Fri, Aug 30, 2019 at 2:30 AM Tim wrote:
>
>
>
>
Very cool. that should motivate people to use their LOM
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Fri, Aug 30, 2019 at 2:16 AM Richard Ellis
wrote:
> Hi Tim
> Not the pic I meant to put on, but the
I’m finding all sorts of things. The attatched file shows some roulettes that
can be made using the rotory table and the lead screw. The cool trick is
patterns B and C can be made going up a post. It just takes a slightly
different approach.
I’m going to let you noodle on the idea for a whil
That one worked I see the pic nice Richard
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Richard Ellis
Sent: Friday, 30 August 2019 5:17 PM
To: Legacy Ornamental Mills
Subject: Re: TK Reciprocater long curves
Hi Tim
Not the pic I meant to put on, but the finished
Hey that everyone. (Just got home from work.)
Genius??? Not me ! Perhaps clever? or persistent could describe me better.(
How about just LUCKY? I have some smart friends who help me out went they
can... ) ;-)
Tim the slide and piston arm on the lead screw would be very easy to MAKE, but
you
Too kind Bill. I'm just trying to add to the conversation so others can run
with it. After all, it was my words that made Curt understand the process that
he was able to build a version before seeing mine. Either he is a genius or I'm
really good at describing things. Maybe a bit of both.Thank
: Re: TK Reciprocater long curves
Hi Curt, I hate to call you out on this, but the wave attachment / TK
Reciprocator is not our exclusive item. As you know, it was inspired by the
Atkinson Reciprocator. What makes it unique to our group is the ease of using
a router to cut the pattern
op thinking !!! and put the pic up again
>>> Richard
>>>
>>> On Thursday, August 29, 2019 at 12:06:39 PM UTC+1, Tim wrote:
>>>>
>>>> Am I the only one that does not see a picture or an attachment?
>>>>
>>>>
>>>
namental Mills mailto:legacy-orna...@googlegroups.com> >
Subject: Re: TK Reciprocater long curves
Hi
Here is the pic of my maximum height of wave. I don't need to go to the
extreme but do need the waves to be more exaggerated i:e more stormy---just
want to rock the boat! Hence a
Original message ----
>>> From: Richard Ellis
>>> Date: 8/28/19 11:49 PM (GMT-08:00)
>>> To: Legacy Ornamental Mills
>>> Subject: Re: TK Reciprocater long curves
>>>
>>> Hi
>>> Here is the pic of my maximum height of w
age
>> From: Richard Ellis >
>> Date: 8/28/19 11:49 PM (GMT-08:00)
>> To: Legacy Ornamental Mills >
>>
>> Subject: Re: TK Reciprocater long curves
>>
>> Hi
>> Here is the pic of my maximum height of wave. I don't need to go to
see a picture or an attachment?
>
>
>
> Sent from Samsung tablet
>
> Original message
> From: Richard Ellis >
> Date: 8/28/19 11:49 PM (GMT-08:00)
> To: Legacy Ornamental Mills >
>
> Subject: Re: TK Reciprocater long curves
>
> Hi
Am I the only one that does not see a picture or an attachment? Sent from
Samsung tablet
Original message From: Richard Ellis
Date: 8/28/19 11:49 PM (GMT-08:00) To: Legacy Ornamental Mills
Subject: Re: TK Reciprocater long
curves Hi Here is the pic of my maximum height of
t;
>>
>> Bill
>>
>>
>>
>> *From:* legacy-orna...@googlegroups.com
>> *On Behalf Of *Richard Ellis
>> *Sent:* Tuesday, 20 August 2019 4:59 PM
>> *To:* Legacy Ornamental Mills
>> *Subject:* Re: TK Reciprocater long curves
>>
>&
in construction and
complete.
Ron K
-Original Message-
From: 'Ronald Kirchoff' via Legacy Ornamental Mills
To: legacy-ornamental-mills
Sent: Sun, Aug 25, 2019 7:48 am
Subject: Re: TK Reciprocater long curves
Hi CurtYes I would like to see about your wave attachment.Ron
Hi CurtYes I would like to see about your wave attachment.Ron K
-Original Message-
From: 'Curt George' via Legacy Ornamental Mills
To: 'Ronald Kirchoff' via Legacy Ornamental Mills
Sent: Sat, Aug 24, 2019 12:14 am
Subject: Re: TK Reciprocater long curves
t George' via Legacy Ornamental Mills
To: legacy-ornamental-mills
Sent: Fri, Aug 23, 2019 8:53 am
Subject: Re: TK Reciprocater long curves
Keep on working with it Richard, you are doing a good job!
The wave attachment, is something that is uniquely OURS, that is the LOM
group's
the next hole to where it should have been.. I:E I made it make a mistake
> like I did. All trial and error on my part.
> The question is ---shall I be able to do it again ??
> Richard
>
> On Thursday, August 22, 2019 at 11:44:06 AM UTC+1, Tim wrote:
>
> That's something
t to Tim. We work
> together on wave form generations using the rotory table.
> Regards,
> Ron K
>
> From: 'Curt George' via Legacy Ornamental Mills <
> legacy-orna...@googlegroups.com >
> To: legacy-ornamental-mills
> >
> Sent: Fri, Aug 23, 2019 8:53
yet but I will send a copy of the curvilinear wave report to Tim. We
work together on wave form generations using the rotory table.
Regards,
Ron K
From: 'Curt George' via Legacy Ornamental Mills
To: legacy-ornamental-mills
Sent: Fri, Aug 23, 2019 8:53 am
Subject: Re: TK Reciprocat
le.
Regards,
Ron K
From: 'Curt George' via Legacy Ornamental Mills
To: legacy-ornamental-mills
Sent: Fri, Aug 23, 2019 8:53 am
Subject: Re: TK Reciprocater long curves
Keep on working with it Richard, you are doing a good job!
The wave attachment, is something that is uniquely
: Richard Ellis
Date: 8/22/19 3:16 AM (GMT-08:00) To: Legacy Ornamental Mills Subject: Re: TK Reciprocater long curves
Tim & othersHere are a couple of pics of the same bit of wood.Richard
On Thursday, August 22, 2019 at 8:33:28 AM UTC+1, Richard Ellis wrote:
Thanks for the info Curt & Bill
om: Richard Ellis
> Date: 8/22/19 3:16 AM (GMT-08:00)
> To: Legacy Ornamental Mills
> Subject: Re: TK Reciprocater long curves
>
> Tim & others
> Here are a couple of pics of the same bit of wood.
> Richard
>
> On Thursday, August 22, 2019 at 8:33:28 AM UTC+1, Ri
e: TK Reciprocater long curves
Tim & othersHere are a couple of pics of the same bit of wood.Richard
On Thursday, August 22, 2019 at 8:33:28 AM UTC+1, Richard Ellis wrote:
Thanks for the info Curt & Bill I have printed it of to study and then it will
go into my folder for other s who end up with m
I really like that pattern Richard well done I haven’t seen that one either
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Richard Ellis
Sent: Thursday, 22 August 2019 8:16 PM
To: Legacy Ornamental Mills
Subject: Re: TK Reciprocater long curves
Tim & others
; Sent from Samsung tablet
>
> Original message
> From: Richard Ellis >
> Date: 8/22/19 3:16 AM (GMT-08:00)
> To: Legacy Ornamental Mills >
>
> Subject: Re: TK Reciprocater long curves
>
> Tim & others
> Here are a couple of pics of the same bit
bject: Re: TK Reciprocater long
curves Tim & othersHere are a couple of pics of the same bit of wood.RichardOn
Thursday, August 22, 2019 at 8:33:28 AM UTC+1, Richard Ellis wrote:Thanks for
the info Curt & Bill I have printed it of to study and then it will go into my
folder for other s wh
Thanks for the info Curt & Bill
I have printed it of to study and then it will go into my folder for other
s who end up with my Revo
Richard
On Sunday, August 18, 2019 at 10:46:40 AM UTC+1, Richard Ellis wrote:
>
> Hi all you LOM experts
> I am trying to do a long (approx ) 6 inch flute with the
ntal-mills@googlegroups.com> >
Sent: Thursday, 22 August 2019 2:36 PM
To: legacy-ornamental-mills@googlegroups.com
<mailto:legacy-ornamental-mills@googlegroups.com>
Subject: Re: TK Reciprocater long curves
Hello everyone.
I plan to re-do my attempt to show how I use the wave attach
ornamental-mills@googlegroups.com
Subject: Re: TK Reciprocater long curves
Hello everyone.
I plan to re-do my attempt to show how I use the wave attachment,
But for now this is what I do. ((I would like to say one more thing, My way is
how, I do it. by no means is my way the only way i
nesday, 21 August 2019 11:34 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: TK Reciprocater long curves
Richard
Like I posted on the wave attachment video. Mark your gears to keep your
placement. Your mistake was caused when you started up due to the swing arm
was not in sy
anyway curt so others watching can see how its done
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Wednesday, 21 August 2019 11:34 PM
> *To:* legacy-ornamental-mills@googl
You should do a video anyway curt so others watching can see how its done
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Wednesday, 21 August 2019 11:34 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: TK Reciprocater long curves
Richard
Like I
Hi Curt
Using the 40 plate index plate is quite small I always rotate the spindle
in the same direction . Now if I made a mistake of placing the pivot pin in
the wrong hole How is it that one of the waves was wider and the other one
narrower. On my wood it is on the opposite side. That is for m
f it wasn’t so dam cold here out in the shop I would try a
few and report back.
Bill
From: legacy-orna...@googlegroups. com On
Behalf Of Richard Ellis
Sent: Sunday, 18 August 2019 7:47 PM
To: Legacy Ornamental Mills
Subject: TK Reciprocater long curves
Hi all you LOM experts
I am try
e:
>
> Looks good so far
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@ googlegroups.com
> *On Behalf Of *Richard Ellis
> *Sent:* Tuesday, 20 August 2019 4:59 PM
> *To:* Legacy Ornamental Mills
>
> *Subject:* Re: TK Reciprocater long curves
>
>
>
From: legacy-orna...@ googlegroups.com On
Behalf Of Richard Ellis
Sent: Tuesday, 20 August 2019 4:59 PM
To: Legacy Ornamental Mills
Subject: Re: TK Reciprocater long curves
Just taken a quick pic of the basic (start ) of a coat and hat stand.
It is 38 inches long X2 inch dia. May decde
t: Re: TK Reciprocater long
curves Here is a pic of the curves There are five curves and I was thinking of
putting a straight groove in between. All good practice !!On Tuesday, August
20, 2019 at 10:52:58 AM UTC+1, aussiman wrote:Looks good so far Bill From:
legacy-orna...@googlegroups.com On B
Looks good so far
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Richard Ellis
Sent: Tuesday, 20 August 2019 4:59 PM
To: Legacy Ornamental Mills
Subject: Re: TK Reciprocater long curves
Just taken a quick pic of the basic (start ) of a coat and hat stand.
It is
sted to see, if it wasn’t so dam cold here out in the shop I
> would try a few and report back.
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com <
> legacy-orna...@googlegroups.com > *On Behalf Of *Richard
> Ellis
> *Sent:* Sunday, 18 Au
groups.com
On Behalf Of Richard Ellis
Sent: Sunday, 18 August 2019 7:47 PM
To: Legacy Ornamental Mills
Subject: TK Reciprocater long curves
Hi all you LOM experts
I am trying to do a long (approx ) 6 inch flute with the TK at present with the
standard index gear I get a 2 inch point to poi
7:47 PM
To: Legacy Ornamental Mills
Subject: TK Reciprocater long curves
Hi all you LOM experts
I am trying to do a long (approx ) 6 inch flute with the TK at present with the
standard index gear I get a 2 inch point to point curve
If I change to the 2X gear I think it will only give me a
peaks per pitch.That is what I
recall, I'm not near a machine to prove it.Good luck.Sent from Samsung tablet
Original message From: Richard Ellis
Date: 8/18/19 2:46 AM (GMT-08:00) To: Legacy Ornamental Mills
Subject: TK Reciprocater long curves
Hi all you LOM expertsI am tryi
Hi all you LOM experts
I am trying to do a long (approx ) 6 inch flute with the TK at present with
the standard index gear I get a 2 inch point to point curve
If I change to the 2X gear I think it will only give me a four inch point
to point --- I have not tried but it's my guess !!
Am I trying
56 matches
Mail list logo
