[MBZ] Best way to test fan clutch

2016-04-03 Thread Dan Penoff via Mercedes
Subject says it all. I want to test the fan clutch on the 94 S420. I'll be Googling, but though I would solicit input here as well. Thanks, Dan Sent from my iPad ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubs

Re: [MBZ] OT dishwashers

2016-04-03 Thread Dan Penoff via Mercedes
Our Maytag was new in 2010, installed when the former owner replaced all of the kitchen appliances. It didn't clean well and had an issue with the buildup of gunk at the door hinge area. We had Maytag check it out on at least two occasions, both of which we were told we weren't removing enough

[MBZ] Have W320 cabs really lost their value?

2016-04-03 Thread Jaime Kopchinski via Mercedes
This is the second or third car I've seen offered this cheap. http://newjersey.craigslist.org/cto/5520820567.html -- Jaime Kopchinski http://www.jaimekop.com/ ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscri

Re: [MBZ] OT dishwashers

2016-04-03 Thread Mitch Haley via Mercedes
I've been a Fisher and Paykel fan for about 15 years since I discovered the Ecosmart clothes washer. I was going to buy my Mom a Speed Queen front loader, but then she said she wanted a top loader. A few years later I got her a top loading dryer (this is great, you just pull stuff out of the top o

Re: [MBZ] Mobil One Rebates

2016-04-03 Thread Dan Penoff via Mercedes
That rebate has been around for about a month. I used it a few weeks ago when I replenished my M1 0W-40 supply from Amazon. The price at Amazon has dropped to below $26 for a five quart jug, so that made it cheap as wine (two buck Chuck?) and Amazon delivered it to my door. Icing on the cake i

Re: [MBZ] OT dishwashers

2016-04-03 Thread Dan Penoff via Mercedes
I looked for F&P stuff in the area when we were going to replace the dishwasher, but it’s pretty scarce around here, or so it seems. Dan > On Apr 3, 2016, at 7:20 AM, Mitch Haley via Mercedes > wrote: > I've been a Fisher and Paykel fan for about 15 years since I discovered the > Ecosmart cl

Re: [MBZ] OT dishwashers

2016-04-03 Thread M. Mitchell Marmel via Mercedes
Got a 20+ year old Kitchenaid with the manual locking lever, clunk push buttons and all. Gets stuff nice and clean, never clogs, only problem it's had since I moved in was the soap dispenser needed a little fine tuning. -MMM- ___ http://www.okiebenz.com To sea

Re: [MBZ] Have W320 cabs really lost their value?

2016-04-03 Thread Dan Penoff via Mercedes
There was one like this on BAT a few months ago and it didn’t command much money, either. It was green, too. There weren’t many of these made, and I don’t think they had the appeal of the R129. Sort of missed the mark on this, I think. Dan > On Apr 3, 2016, at 7:08 AM, Jaime Kopchinski via

Re: [MBZ] Best way to test fan clutch

2016-04-03 Thread Max Dillon via Mercedes
Engine off. Compare the amount of force required to turn the fan, cold engine vs really hot engine (need to read service manual to find the fan engagement temperature). Should be a higher force, should be noticeable increase in air flow noise with engine running. Not very scientific, but will

Re: [MBZ] OT dishwashers

2016-04-03 Thread Max Dillon via Mercedes
Around here, the cost of a service call can easily exceed fifty percent of the cost of a new appliance. If I can't fix myself, I buy a new appliance. If repair info is difficult or impossible to find, I won't buy that brand. We bought a Samsung refrigerator about seven or eight years ago, had

Re: [MBZ] Best way to test fan clutch

2016-04-03 Thread Curly McLain via Mercedes
Subject says it all. I want to test the fan clutch on the 94 S420. I'll be Googling, but though I would solicit input here as well. Thanks, Dan Sent from my iPad The test I saw was to roll up a newspaper and stick that into the back of the fan while the engine is idling. if the fan stops,

Re: [MBZ] Best way to test fan clutch

2016-04-03 Thread Dan Penoff via Mercedes
This is pretty much what I’m finding. I don’t know if the clutch is dead, but the youngster says the car is running hotter after a highway run and he gets onto surface streets. Says it will get up to about 100C and hang there for a bit. Ambients are fairly low today (it was 55F this morning wh

Re: [MBZ] Best way to test fan clutch

2016-04-03 Thread Dan Penoff via Mercedes
I have a container of the 1 C fluid. How many days did it take to fill it? Dan > On Apr 3, 2016, at 8:53 AM, Curly McLain via Mercedes > wrote: > > The test I saw was to roll up a newspaper and stick that into the back of the > fan while the engine is idling. if the fan stops, you need

Re: [MBZ] Best way to test fan clutch

2016-04-03 Thread Peter Frederick via Mercedes
Visco clutch? Easy -- fan must be stiff when cold and the engine not running a while, and spin hard very briefly when started. Must pull hard when engine is hot enough to need extra cooling -- you should feel lots of air. When it should be engaged, shut the engine off while watching the

Re: [MBZ] Have W320 cabs really lost their value?

2016-04-03 Thread Curly McLain via Mercedes
There was one like this on BAT a few months ago and it didn't command much money, either. It was green, too. There weren't many of these made, and I don't think they had the appeal of the R129. Sort of missed the mark on this, I think. Dan And you get the added bonus of self destructing i

Re: [MBZ] Best way to test fan clutch

2016-04-03 Thread Dan Penoff via Mercedes
Thanks, Peter! Dan > On Apr 3, 2016, at 9:06 AM, Peter Frederick via Mercedes > wrote: > > Visco clutch? > > Easy -- fan must be stiff when cold and the engine not running a while, and > spin hard very briefly when started. Must pull hard when engine is hot > enough to need extra cooling

Re: [MBZ] OT dishwashers

2016-04-03 Thread Curly McLain via Mercedes
Maytag is no longer Maytag. Nothing is left at Newton, IA but empty buildings. Someone is rebuilding wind turbines in one part of it. Maytag is a fridgidaire with a different sticker. 40 yrs ago I worked on a 20 yr old Kitchenaid DW. It was well built compared to the major brands of the tim

Re: [MBZ] OT dishwashers

2016-04-03 Thread Mitch Haley via Mercedes
I used to search CL for Paykel -CPAP to weed out the breathing machines. Took me about 4 months to get the two dishwashers. About once a year I find something I can't pass up and throw it in the back of the garage, like a washer-dryer set for $150 (now owned by my neighbors) or an Intuitive washer

Re: [MBZ] Have W124 E320 cabs really lost their value?

2016-04-03 Thread Mitch Haley via Mercedes
In another 30 years, will they be somewhat expensive?Ten years ago, the nice ones were all wearing double digit price tags, but they were only ten year old cars then. Mitch.On April 3, 2016 at 8:40 AM Dan Penoff via Mercedes wrote:There was one like this on BAT a few months ago and it didn’t comm

Re: [MBZ] OT dishwashers

2016-04-03 Thread Kaleb C. Striplin via Mercedes
I have a kitchen aid in the other house and this maytag here, all of which are whirlpool I believe. They both get that buildup under the door/hinge area that is annoying. I removed the top rack yesterday and noticed the slide is caked up with residue. Do you have this happen with the Bosch? Se

Re: [MBZ] Have W320 cabs really lost their value?

2016-04-03 Thread Kaleb C. Striplin via Mercedes
Yea I have seen several in that price range also. Maybe it's time I bought one. Sent from my iPhone > On Apr 3, 2016, at 6:08 AM, Jaime Kopchinski via Mercedes > wrote: > > This is the second or third car I've seen offered this cheap. > > http://newjersey.craigslist.org/cto/5520820567.html >

[MBZ] Who needs this 300mki rodbender?

2016-04-03 Thread Mitch Haley via Mercedes
http://lansing.craigslist.org/cto/5513838228.html ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Best way to test fan clutch

2016-04-03 Thread Curly McLain via Mercedes
you drill a hole for a #10 sheet metal screw (or a self tapping machine screw) in the unfinned center part, away from the bimetal spring. Pharmacy gave me a 10 cc syringe without a needle. Seems to me the dose was 16 cc. Shoot that in. Wipe clean. I put locktite on the screw head and put i

Re: [MBZ] Who needs this 300mki rodbender?

2016-04-03 Thread Kaleb C. Striplin via Mercedes
I do, wish there were some interior photos. Sent from my iPhone > On Apr 3, 2016, at 8:41 AM, Mitch Haley via Mercedes > wrote: > > http://lansing.craigslist.org/cto/5513838228.html > > ___ > http://www.okiebenz.com > > To search list archives http://www.o

Re: [MBZ] Who needs this 300mki rodbender?

2016-04-03 Thread Curly McLain via Mercedes
http://lansing.craigslist.org/cto/5513838228.html Too bad it is a short body. Still, I'd give 'im $500 for it. Maybe $750 ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to:

Re: [MBZ] OT dishwashers

2016-04-03 Thread Dan Penoff via Mercedes
Not so far, but we’ve only had it about a month. The Maytag was flat out nasty in this regard. If I didn’t clean it about every two weeks, it would get really foul smelling and disgusting from the buildup of this goop. Dan > On Apr 3, 2016, at 9:37 AM, Kaleb C. Striplin via Mercedes > wrote

Re: [MBZ] OT dishwashers

2016-04-03 Thread Dwight Giles via Mercedes
I think Bosch gets the top rating. Dwight Giles Jr. 1982 300CD 1990 300D Wickford RI On Apr 2, 2016 7:35 PM, "Kaleb C. Striplin via Mercedes" < mercedes@okiebenz.com> wrote: > So when we moved into this house I put in all new appliances which are all > matching Maytag from the same series. This

Re: [MBZ] Best way to test fan clutch

2016-04-03 Thread Max Dillon via Mercedes
That reminds me, if you can move the blade tip fore / aft more than half an inch, the bearing is bad and a new clutch is required. -- Max Dillon Charleston SC '87 300TD '95 E300 ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archiv

Re: [MBZ] OT dishwashers

2016-04-03 Thread WILTON via Mercedes
'Zackly Wilt - Original Message - From: "Max Dillon via Mercedes" To: "Mercedes Discussion List" Cc: "Max Dillon" Sent: Saturday, April 02, 2016 11:40 PM Subject: Re: [MBZ] OT dishwashers We have a Whirlpool "Quiet Partner I", which was about $200 a few years ago. Quieter than t

Re: [MBZ] Have W320 cabs really lost their value?

2016-04-03 Thread Bob Rentfro via Mercedes
My indy told me Mercedes stopped making model specific parts for them. Bob R On Apr 3, 2016 6:38 AM, "Kaleb C. Striplin via Mercedes" < mercedes@okiebenz.com> wrote: > Yea I have seen several in that price range also. Maybe it's time I bought > one. > > Sent from my iPhone > > > On Apr 3, 2016, a

Re: [MBZ] VW

2016-04-03 Thread Bob Rentfro via Mercedes
When I took my w210 in for emissions here in AZ, they simply performed an opacity test. Why can't VW diesels simply have to pass an old school opacity test which is, evidently, sufficient for older diesels? Bob R On Apr 2, 2016 10:01 PM, "G Mann via Mercedes" wrote: > Read a report some days ago

Re: [MBZ] VW

2016-04-03 Thread Mitch Haley via Mercedes
On April 3, 2016 at 11:10 AM Bob Rentfro via Mercedes wrote:When I took my w210 in for emissions here in AZ, they simply performed anopacity test. Why can't VW diesels simply have to pass an old schoolopacity test which is, evidently, sufficient for older diesels?Apparently because your W210 met

Re: [MBZ] OT dishwashers

2016-04-03 Thread rogerhga--- via Mercedes
Curly, I totally agree about the energy rating, especially on refrigerators. My current one required a new compressor, fortunately before going out of warranty. The repair guy said the companies are undersizing the compressor to get better energy ratings, but as such, the compressor wears out s

Re: [MBZ] OT dishwashers

2016-04-03 Thread Kaleb C. Striplin via Mercedes
One last question regarding dishwasher before I load up in my 6.5 turbo diesel powered Suburban (required diesel content) and drop a grand on the top of the line Bosch that Lowes has. Have you had your Bosch ever leave deposits on your glasses in the top rack. This is the main problem I have h

Re: [MBZ] OT dishwashers

2016-04-03 Thread WILTON via Mercedes
Re. limitations: It's most upsetting to me that I can't (there's a word I've never used 'until recently) climb ladders any more. 'Needing some repairs to plaster ceilings in at least 3 or 4 places around the house. Painter I talked to for bid on repairs and painting can't seem to understand w

Re: [MBZ] OT dishwashers

2016-04-03 Thread rogerhga--- via Mercedes
Just a curious question in regards to the build up problem some of you are having. Do you put greasy/oily pots or pans in the dishwasher? I'm on a septic tank system, so I put all grease/oil in the trash. I clear most food off pans and plates. I don't have any problems with the door areas. Also,

Re: [MBZ] OT dishwashers

2016-04-03 Thread WILTON via Mercedes
I think they're made near here at Kinston, NC. Wilton - Original Message - From: "Curly McLain via Mercedes" To: "Mercedes Discussion List" Cc: "Curly McLain" <126die...@gmail.com> Sent: Sunday, April 03, 2016 9:15 AM Subject: Re: [MBZ] OT dishwashers Maytag is no longer Maytag. N

Re: [MBZ] OT dishwashers

2016-04-03 Thread Curt Raymond via Mercedes
Check with an appliance store. Before I finally figured out the issue with our fridge I priced Lowe's, then checked out an appliance shop, he had a better price on a better fridge and a better selection. I hate Lowe's and Home Depot. Wet wood and cheap crap staffed with no nothing employees...

Re: [MBZ] OT dishwashers

2016-04-03 Thread Kaleb C. Striplin via Mercedes
We scrape off the plates in the trash then put them in the washer, which is what you are supposed to do. The deposits we are getting is basically a gritty/food substance stuck on the inside of the glasses in the top rack. On 4/3/2016 10:24 AM, rogerhga--- via Mercedes wrote: Just a curious q

Re: [MBZ] OT dishwashers

2016-04-03 Thread Dimitri via Mercedes
Yup. Had a 4.5 yr old stainless GE dishwasher stop cleaning well in a rental unit. Did all the basic troubleshooting stuff myself. It didn't fix problem so I just took it out and replaced with a new one. I'm not paying minimum of $200 plus for a service call when I can buy a new machine for unde

Re: [MBZ] OT dishwashers

2016-04-03 Thread Dan Penoff via Mercedes
+1 We bought ours from H.H. Gregg, a semi-national appliance store. $629.00, free delivery, free haul away of the old one, a Bosch $35 rebate, and 18 months same as cash. Hell, let them carry the paper. Dan > On Apr 3, 2016, at 11:33 AM, Curt Raymond via Mercedes > wrote: > > Check with

Re: [MBZ] OT dishwashers

2016-04-03 Thread Dan Penoff via Mercedes
The Bosch gets things noticeably cleaner than the Maytag ever did, and that’s especially noticeable with glassware. Do realize that your water could play a part in this, too, so it’s not necessarily the dishwasher’s fault. We use a rinse agent with the Bosch, which we did with the Maytag as wel

Re: [MBZ] OT dishwashers

2016-04-03 Thread Dan Penoff via Mercedes
The Bosch gets things noticeably cleaner than the Maytag ever did, and that’s especially noticeable with glassware. Do realize that your water could play a part in this, too, so it’s not necessarily the dishwasher’s fault. We use a rinse agent with the Bosch, which we did with the Maytag as wel

Re: [MBZ] OT dishwashers

2016-04-03 Thread Kaleb C. Striplin via Mercedes
We do use the rinse stuff in the maytag as well. It does allow you to adjust the amount going in, maybe I have it set too low. I think I may pull the drain line and see if maybe it is plugged up, and maybe pull the thing apart again but as I mentioned it seems with the Bosch with just a simp

Re: [MBZ] OT dishwashers

2016-04-03 Thread Mitch Haley via Mercedes
On April 3, 2016 at 11:16 AM rogerhga--- via Mercedes wrote:Curly, I totally agree about the energy rating, especially on refrigerators. My current one required a new compressor, fortunately before going out of warranty. The repair guy said the companies are undersizing the compressor to get bett

Re: [MBZ] OT dishwashers

2016-04-03 Thread Mitch Haley via Mercedes
Re: Limitations: Painters aren't plasterers or even drywall finishers. Some guys can use thought and reason to work outside their field of expertise, your painter can't. Mitch. On April 3, 2016 at 11:24 AM WILTON via Mercedes wrote:Painter I talked to for bid on repairs and painting can't seem to

Re: [MBZ] OT dishwashers -- Bosch and Benz

2016-04-03 Thread Rich Thomas via Mercedes
I vaguely recall that Bosch dishwashers are built in NC somewhere, so merkun-built, for whatever that is worth. MB are expanding the Sprinter factory in the area, on Friday I went to pick up my wife's packet for the local bridge run, which she did not do, and they had an "expo" at the place wi

[MBZ] 1974 Steering Wheel

2016-04-03 Thread clay via Mercedes
Kaleb, Would you happen to have a spare steering wheel I can use in my R107? I took the car out for a sunny day drive and the horn pad decided to let loose on one side and the car proceded to bleat like a sheep down the highway. I could attempt a repair, but am not sure just how the thing goes

Re: [MBZ] VW

2016-04-03 Thread Peter Frederick via Mercedes
The nitrogen oxide standards apply mostly to California and New York before 2010 or so, I think. Your W210 was not subject to NOX emissions testing. Peter ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe

Re: [MBZ] OT dishwashers

2016-04-03 Thread WILTON via Mercedes
Right, though he claims to know all about it. This job does not need a plasterer nor a dry-waller - just somebody with some common sense and willing to listen to me, who can easily tell such a person how to do it and even broaden his/her skill set. I'd bet that I could teach any of "youse guys

Re: [MBZ] OT dishwashers -- Bosch and Benz

2016-04-03 Thread WILTON via Mercedes
Bosch at New Bern, NC, on down US 70 east of Kinston. Electrolux, Frigidaire, AEG and possibly some others at Kinston. Wilton - Original Message - From: "Rich Thomas via Mercedes" To: Cc: "Rich Thomas" Sent: Sunday, April 03, 2016 12:32 PM Subject: Re: [MBZ] OT dishwashers -- Bosc

Re: [MBZ] OT dishwashers

2016-04-03 Thread Curly McLain via Mercedes
Re. limitations: It's most upsetting to me that I can't (there's a word I've never used 'until recently) climb ladders any more. 'Needing some repairs to plaster ceilings in at least 3 or 4 places around the house. Painter I talked to for bid on repairs and painting can't seem to understand wh

Re: [MBZ] OT dishwashers

2016-04-03 Thread Curly McLain via Mercedes
Just a curious question in regards to the build up problem some of you are having. Do you put greasy/oily pots or pans in the dishwasher? I'm on a septic tank system, so I put all grease/oil in the trash. I clear most food off pans and plates. I don't have any problems with the door areas. Also

Re: [MBZ] OT dishwashers

2016-04-03 Thread Curly McLain via Mercedes
Yep Appliance guy I worked for in college is pushing 80 now and still at it. He says the same thing. Curly, I totally agree about the energy rating, especially on refrigerators. My current one required a new compressor, fortunately before going out of warranty. The repair guy said the comp

Re: [MBZ] New Frontier

2016-04-03 Thread clay via Mercedes
Frontier is GARBAGE Verizon blew through tons of cash building out FIOS, then began selling off regions to this mismanaged midwest telecom. These clowns are way out of their depth and making a mess of all manner of things. Service is restricted compared to Verizon, speeds are crippled, they a

Re: [MBZ] Have W320 cabs really lost their value?

2016-04-03 Thread clay via Mercedes
There has to be something seriously wrong, as that price is retarded low. clay On Apr 3, 2016, at 4:08 AM, Jaime Kopchinski via Mercedes wrote: > This is the second or third car I've seen offered this cheap. > > http://newjersey.craigslist.org/cto/5520820567.html > > > > -- > Jaime Kopchin

Re: [MBZ] OT dishwashers

2016-04-03 Thread Curly McLain via Mercedes
The Bosch gets things noticeably cleaner than the Maytag ever did, and that's especially noticeable with glassware. Do realize that your water could play a part in this, too, so it's not necessarily the dishwasher's fault. We use a rinse agent with the Bosch, which we did with the Maytag as we

Re: [MBZ] Have W320 cabs really lost their value?

2016-04-03 Thread clay via Mercedes
I like the Cab. The W129 just does not sing to me. Seems to be a muddle of a R107 and W126 SEC. The W124 Cab has leg room, size, and features of a fuller size car. Much better than the tiny CLK with no room for much more than groceries in the back seats clay On Apr 3, 2016, at 5:40 AM, Dan

Re: [MBZ] OT dishwashers

2016-04-03 Thread rogerhga--- via Mercedes
Just a couple of suggestions. First, don't know whether you have "hard or soft" water. I've only used Cascade powder since my Maytag was new. I never use rinse agents, so I've never used that capability on the Maytag. Second, when I built my house, I installed an inline GE whole house water filt

Re: [MBZ] OT dishwashers

2016-04-03 Thread WILTON via Mercedes
'Zackly; 'wasn't born yesterday, was I? BTW, I'm considering asking local high school vocational teacher if he can recommend a 17-year-old who will listen to and follow my instructions to get what I need done and, at same time, learn something useful for himself for the rest of his life. Wil

Re: [MBZ] OT dishwashers

2016-04-03 Thread OK Don via Mercedes
Rent one of those mutli-scissor parallel lift things and let it lift you to the ceiling instead of climbing a ladder - could even lie on your back like Michael Angelo . . . On Sun, Apr 3, 2016 at 10:24 AM, WILTON via Mercedes wrote: > Re. limitations: It's most upsetting to me that I can't (the

Re: [MBZ] OT dishwashers

2016-04-03 Thread Curly McLain via Mercedes
I almost suggested finding a young guy willing to work and willling to learn. Your "painter" has bad habits. But I kept my mouth shut until you called it. 'Zackly; 'wasn't born yesterday, was I? BTW, I'm considering asking local high school vocational teacher if he can recommend a 17-year-

Re: [MBZ] OT dishwashers

2016-04-03 Thread Curly McLain via Mercedes
Just a couple of suggestions. First, don't know whether you have "hard or soft" water. I've only used Cascade powder since my Maytag was new. I never use rinse agents, so I've never used that capability on the Maytag. Second, when I built my house, I installed an inline GE whole house water fil

Re: [MBZ] OT dishwashers

2016-04-03 Thread Dan Penoff via Mercedes
Dishes get scraped and rinsed. Water heater is set for 140F. Pots and pans are all commercial grade aluminum, they never see the inside of a dishwasher. Dan > On Apr 3, 2016, at 11:24 AM, rogerhga--- via Mercedes > wrote: > > Just a curious question in regards to the build up problem some o

[MBZ] Does this seem garish to you?

2016-04-03 Thread Dan Penoff via Mercedes
It’s about 5 minutes from my office. I’m interested enough I might go look at it. That interior just looks weird. ed with gray carpet? Price is crackpipe thinking, however. Dan ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/ar

Re: [MBZ] OT dishwashers

2016-04-03 Thread Kaleb C. Striplin via Mercedes
I always use cascade Sent from my iPhone On Apr 3, 2016, at 3:40 PM, Curly McLain via Mercedes wrote: >> Just a couple of suggestions. First, don't know whether you have "hard or >> soft" water. I've only used Cascade powder since my Maytag was new. I never >> use rinse agents, so I've never

Re: [MBZ] Have W320 cabs really lost their value?

2016-04-03 Thread Dan Penoff via Mercedes
Betting it need hydraulic cylinders done for the top. Dealer price is more than the car is worth. Price from Klaus of Top Hydraulics is around $600 for a full set. Dan > On Apr 3, 2016, at 3:11 PM, clay via Mercedes wrote: > > There has to be something seriously wrong, as that price is ret

[MBZ] 124 mirror

2016-04-03 Thread Curly McLain via Mercedes
What is the best way to get a rearview mirror back in place on a 124? This one came off easily but the pins stick out beyond the taper so it does not snap back in place. Use steel or alum bar stock to push the pin in while holding the mirror in place? That leaves me short one hand to do that

Re: [MBZ] OT dishwashers

2016-04-03 Thread Dan Penoff via Mercedes
Is he related to Don Atello? Dan > On Apr 3, 2016, at 4:27 PM, OK Don via Mercedes wrote: > > Rent one of those mutli-scissor parallel lift things and let it lift you to > the ceiling instead of climbing a ladder - could even lie on your back like > Michael Angelo . . . >

Re: [MBZ] Does this seem garish to you?

2016-04-03 Thread Max Dillon via Mercedes
No link... -- Max Dillon Charleston SC '87 300TD '95 E300 On April 3, 2016 4:50:35 PM EDT, Dan Penoff via Mercedes wrote: >It’s about 5 minutes from my office. I’m interested enough I might go >look at it. That interior just looks weird. ed with gray carpet? > >Price is crackpipe thinking, ho

Re: [MBZ] 124 mirror

2016-04-03 Thread OK Don via Mercedes
I had the same problem - couldn't get it back at all. Kaleb showed up and snapped it back in about 5 seconds. I still don't know how . . . On Sun, Apr 3, 2016 at 3:50 PM, Curly McLain via Mercedes < mercedes@okiebenz.com> wrote: > What is the best way to get a rearview mirror back in place on a 1

Re: [MBZ] Does this seem garish to you?

2016-04-03 Thread Dan Penoff via Mercedes
Try this: http://tampa.craigslist.org/hil/cto/5521536790.html Sorry. Dan > On Apr 3, 2016, at 5:00 PM, Max Dillon via Mercedes > wrote: > > No link... > -- > Max Dillon > Charleston SC > '87 300TD > '95 E300 > > On April 3, 2016 4:50

Re: [MBZ] OT dishwashers

2016-04-03 Thread Kaleb C. Striplin via Mercedes
Your rinse them before putting them in the dishwasher? Manual on mine says and everything I read says just scrape off the large food and put them in without prerinse. Sent from my iPhone > On Apr 3, 2016, at 3:48 PM, Dan Penoff via Mercedes > wrote: > > Dishes get scraped and rinsed. Water

Re: [MBZ] 124 mirror

2016-04-03 Thread Max Dillon via Mercedes
I use the wooden handle of a rubber mallet, position the mirror base so one side is in place, place the mallet handle on the other side, strike smartly with hand, should pop right in. Not easy at all the first time, you'll get better with practice. -- Max Dillon Charleston SC '87 300TD '95 E30

Re: [MBZ] OT dishwashers

2016-04-03 Thread Dan Penoff via Mercedes
We did with the Maytag, with the hope that it had some effect on the outcome. Dan > On Apr 3, 2016, at 5:06 PM, Kaleb C. Striplin via Mercedes > wrote: > > Your rinse them before putting them in the dishwasher? Manual on mine says > and everything I read says just scrape off the large food a

Re: [MBZ] Does this seem garish to you?

2016-04-03 Thread Rich Thomas via Mercedes
Depends on your proclivities --R On 4/3/16 5:02 PM, Dan Penoff via Mercedes wrote: Try this: http://tampa.craigslist.org/hil/cto/5521536790.html Sorry. Dan On Apr 3, 2016, at 5:00 PM, Max Dillon via Mercedes wrote: No link... -- M

Re: [MBZ] OT dishwashers

2016-04-03 Thread Rich Thomas via Mercedes
And his buddy Sal Monella, who owns a diner --R On 4/3/16 4:58 PM, Dan Penoff via Mercedes wrote: Is he related to Don Atello? Dan On Apr 3, 2016, at 4:27 PM, OK Don via Mercedes wrote: Rent one of those mutli-scissor parallel lift things and let it lift you to the ceiling instead of cl

Re: [MBZ] Does this seem garish to you?

2016-04-03 Thread Kaleb C. Striplin via Mercedes
Looks nice except for the backwards trunk badges. Price is way too high. Sent from my iPhone > On Apr 3, 2016, at 4:02 PM, Dan Penoff via Mercedes > wrote: > > Try this: > > http://tampa.craigslist.org/hil/cto/5521536790.html > > > > S

Re: [MBZ] OT dishwashers

2016-04-03 Thread Kaleb C. Striplin via Mercedes
But you don't with the Bosch? I took mine apart again, there did not appear to be anything else I could clean or take apart. This appears to have a sealed all in one unit with the pump and copper and you can't appear to take it apart from above. I ran another empty load with a couple of cups of

Re: [MBZ] OT dishwashers

2016-04-03 Thread M. Mitchell Marmel via Mercedes
Welp, I got a KitchenAid KUDJ23, as I say about 20 years old, and I use SUN brand dishwasher powder from the dollar store. Today's load included a large chickenfat-laden broiler, a toaster oven chickenfat-laden broiler, a full complement of dinner dishes, a chili-laden bowl with the chili dried on

Re: [MBZ] OT dishwashers

2016-04-03 Thread Kaleb C. Striplin via Mercedes
My dad has a KitchenAid that was purchased new by my grandmother in early to mid 80's. It is a roll around one that you hook up to the kitchen sink faucet and drains there as well. It is really old school with the big chrome push buttons and such. It still works great. On 4/3/2016 5:02 PM,

[MBZ] This Weekend's Fun (long)

2016-04-03 Thread Dan Penoff via Mercedes
Yesterday was one of those days where you expend a lot of energy but don’t accomplish a lot… Pulled the guts out of the center console with the hope of replacing the center vent vacuum actuator, as I’m not getting any significant volume of air through the center vents. This car has literally y

Re: [MBZ] OT dishwashers

2016-04-03 Thread Dan Penoff via Mercedes
Nope. They say you don’t have to. For that matter, so did the Maytag…. Dan > On Apr 3, 2016, at 5:44 PM, Kaleb C. Striplin via Mercedes > wrote: > > But you don't with the Bosch? I took mine apart again, there did not appear > to be anything else I could clean or take apart. This appears t

Re: [MBZ] OT dishwashers

2016-04-03 Thread WILTON via Mercedes
Yep, I've considered that, too. Wilt - Original Message - From: "OK Don via Mercedes" To: "Mercedes Discussion List" Cc: "OK Don" Sent: Sunday, April 03, 2016 4:27 PM Subject: Re: [MBZ] OT dishwashers Rent one of those mutli-scissor parallel lift things and let it lift you to the

Re: [MBZ] This Weekend's Fun (long)

2016-04-03 Thread WILTON via Mercedes
'Nother ATTABOY! Wilton - Original Message - From: "Dan Penoff via Mercedes" To: "Mercedes List" Cc: "Dan Penoff" Sent: Sunday, April 03, 2016 6:08 PM Subject: [MBZ] This Weekend's Fun (long) Yesterday was one of those days where you expend a lot of energy but don’t accomplish a

Re: [MBZ] OT dishwashers

2016-04-03 Thread Kaleb C. Striplin via Mercedes
Alright so I ran the glasses thru again and this is how they are turning out. I am running them again this time in the bottom rack. The top rack just does not clean anymore and the upper arm does spin and shoot water. I'm at a loss except to replace it. Sent from my iPhone > On Apr 3, 2016,

Re: [MBZ] OT dishwashers

2016-04-03 Thread Curly McLain via Mercedes
Naa, the restaurant is Sam n Ella's That was standard schtick for Steve Locker on WHO radio, before he retired. And his buddy Sal Monella, who owns a diner --R On 4/3/16 4:58 PM, Dan Penoff via Mercedes wrote: Is he related to Don Atello? Dan On Apr 3, 2016, at 4:27 PM, OK Don via Merc

Re: [MBZ] OT dishwashers

2016-04-03 Thread Curly McLain via Mercedes
I bought a portable in 1980 and installed it as a built-in. We still use that butcher block maple top on another cabinet that has been moved house to house. Someplace I still have the casters in a box. My dad has a KitchenAid that was purchased new by my grandmother in early to mid 80's. I

Re: [MBZ] OT dishwashers

2016-04-03 Thread Curly McLain via Mercedes
Welp, I got a KitchenAid KUDJ23, as I say about 20 years old, and I use SUN brand dishwasher powder from the dollar store. Today's load included a large chickenfat-laden broiler, a toaster oven chickenfat-laden broiler, a full complement of dinner dishes, a chili-laden bowl with the chili dried o

Re: [MBZ] OT dishwashers

2016-04-03 Thread Kaleb C. Striplin via Mercedes
Yep this one has the butcher block top, forgot about that. On 4/3/2016 6:35 PM, Curly McLain via Mercedes wrote: I bought a portable in 1980 and installed it as a built-in. We still use that butcher block maple top on another cabinet that has been moved house to house. Someplace I still have

Re: [MBZ] OT dishwashers

2016-04-03 Thread Dan Penoff via Mercedes
That reminds me of something else we had issues with on the Maytag - the nozzles on the spray arms would get clogged with food and I would have to take them apart and clean them out. Dan > On Apr 3, 2016, at 7:25 PM, Kaleb C. Striplin via Mercedes > wrote: > > Alright so I ran the glasses t

Re: [MBZ] OT dishwashers

2016-04-03 Thread Kaleb C. Striplin via Mercedes
I have done all that, they are clean. I'm about sick of messing with this thing but sure hate to buy a new one after only a year. On 4/3/2016 6:49 PM, Dan Penoff via Mercedes wrote: That reminds me of something else we had issues with on the Maytag - the nozzles on the spray arms would get c

Re: [MBZ] This Weekend's Fun (long)

2016-04-03 Thread Max Dillon via Mercedes
Today I began real work toward installing oak flooring in our living room. Spent a few hours driving around to hardware stores and a flooring store getting little odds and ends and some material. Packed up daughter's toys, moved couch and tables to side of the room with the piano and console-b

[MBZ] Raleigh Area MBZ Indy Recommendation

2016-04-03 Thread Scott Ritchey via Mercedes
About 10 years ago, I solicited (and received) recommendations for a Raleigh area Indy to do work on my '82 300SD. That was just before I moved here in late 2005. After the move, remodeling the 1854 farm house took longer than planned and cost more (what a surprise!) and I went back to work (

Re: [MBZ] Raleigh Area MBZ Indy Recommendation

2016-04-03 Thread Dan Penoff via Mercedes
Here are a couple of threads on BW from 2014 for Raleigh: http://www.benzworld.org/forums/search.php?searchid=19809106 D&E is mentioned in the first one a couple of times. Dan > On Apr 3, 2016, at 8:26 PM, Scott Ritchey via Merced

Re: [MBZ] OT dishwashers

2016-04-03 Thread Scott Ritchey via Mercedes
Way ugly. Something ain't right, but what? The only thing that occurs to me is water isn't getting to the top rack. Probably not a factor in your case, but recent Consumer Reports says pre-rinsing dishes tricks the "dirty" sensor in the newer dishwashers into under-washing. > -Original Mess

Re: [MBZ] OT dishwashers

2016-04-03 Thread Scott Ritchey via Mercedes
We’ve had more problems with painters than any other trade. One painter told me (quite proudly, bragged actually) that he didn’t drink and he had a drivers’ license. I think he reckoned that put him at the top of the heap. From: Mercedes [mailto:mercedes-boun...@okiebenz.com] On Behalf Of M

Re: [MBZ] OT dishwashers

2016-04-03 Thread Kaleb C. Striplin via Mercedes
Well I just ran those again on the bottom rack and some of them came clean but those 2 did not, just got done scrubbing them by hand and put back on the washer to tonight's dinner load. I will probably be installing a Bosch tomorrow. Sent from my iPhone > On Apr 3, 2016, at 7:54 PM, Scott Ritch

Re: [MBZ] OT dishwashers

2016-04-03 Thread Scott Ritchey via Mercedes
Kaleb, Just a random thought: does your machine have one of those spinning arms to spray the upper rack? Is it possible the water feed for that arm isn't sealing with the top rack pushed in? ___ http://www.okiebenz.com To search list archives http://www.ok

Re: [MBZ] OT dishwashers

2016-04-03 Thread Kaleb C. Striplin via Mercedes
Yes it does and I have thought of that but when I open the door while it's running the thing is spinning. I have checked all the connections where it slides in the back with the rack pushed in and all appears good Sent from my iPhone > On Apr 3, 2016, at 8:06 PM, Scott Ritchey via Mercedes >

  1   2   >