non riesco a lanciare il daemon SANE che ho installato da rpm (mandrake7.1)
ho seguito le istruzioni in "man saned" ma una volta digitato SANE non trova
il comando.
se digito scanimage mi dice che non trova i devices per SANE.
ciao,
chi mi pu dare una mano?
vorrei configurare il mio scanner LG Electronics
parallelo ma non so da dove cominciare, ho mandato una e-mail alla LG ma non ho
avuto risposta.
spero tanto che qualcuno mi risolva il problema,
per cortesia siate chieri perch sono alle prime armi con
Linux.
Ciao!
Da qualche giorno, quando tento di installare alcuni programmi in
formato RPM, mi appare il seguente messaggio :"only packages with major
numbers = 3 are supported by this version of RPM"; cosa significa
esattamente, e come posso ovviare all'inconveniente? La mia distro è la
7.1.
Grazie
"pol.do" wrote:
ciao,
chi mi può dare una mano?
vorrei configurare il mio scanner LG Electronics parallelo ma non so
da dove cominciare, ho mandato una e-mail alla LG ma non ho avuto
risposta.
spero tanto che qualcuno mi risolva il problema, per cortesia siate
chieri perchè sono alle
Corrado wrote:
Ciao!
Da qualche giorno, quando tento di installare alcuni programmi in
formato RPM, mi appare il seguente messaggio :"only packages with major
numbers = 3 are supported by this version of RPM"; cosa significa
esattamente, e come posso ovviare all'inconveniente? La mia
Avendo un hard disk molto capiente ho riservato tre partizioni per
altrettante distribuzioni linux (una di lavoro: Mandrake 7.1 e le
altre due per provare altre distribuzioni e fare un po di pratica
visto che sono un newbiessimo). Fino ad ora ho sempre installato il
loader (lilo o grub) sulla
On Monday 13 November 2000 17:31, you wrote:
Ti sconsiglio di aggiornare a rpm-4.0 perche' non e` ancora molto
affidabile.
Pare, non ho esperienza diretta, che faccia pasticci nel gestire
il data-base dei pacchetti installati precedentemente con rpm-3.
ciao, andrea
Ci avevo anche
Casa wrote:
Il sab, 11 nov 2000, hai scritto:
scusate la domanda, forse idiota, ma GCC è un ANSI C compiler? se no, dove lo
posso trovare un ANSI C compiler?
grazie mille, osva
Io uso regolarmente gcc per compilare i programmi in ansi c, appunto.
Ciao, Nicola.
Se, dal prompt della
Ho usato per oltre un mese la 7.1 con una Creative PCI 128,
senza problemi. Improvvisamente, senza ragioni apparenti non
essendo stato modificato nulla nel software, la scheda audio non
funziona piu' (l'unica cosa avvenuta e' stato il cambio di slot della
scheda, che comunque funziona
Ho installato la 7.2 con kde come interfaccia grafica, e le icone del floppy e dei due
CD-rom che ho non compaiono sul
desktop. Le relative righe di mount nel fstab ci sono, ma se cerco di
richiamarle dal desktop mi dicono che non ho il permesso per montare il
dispositivo. Se entro come root,
Ciao a tutti,
non e' la prima volta che scrivo qua e qualcuno mi riconoscera'. per
quel che puo' importare;-)!
Per correttezza dico che non ho ancora provato il programma di Email
"PRONTO", non mi sono molto applicato a dire il vero per motivi di tempo, a
parte tutto Linux funziona
Il lun, 13 nov 2000, hai scritto:
Ho installato la 7.2 con kde come interfaccia grafica, e le icone del floppy e dei
due CD-rom che ho non compaiono sul
desktop.
Non saranno mica le icone il problema ? :-)
Le relative righe di mount nel fstab ci sono, ma se cerco di
richiamarle dal
Non riesco in alcun modo,per quanto abbia tentato, ad utilizzare ( tranne
con Messenger di Netscape e StarOffice 5.2)
la posta elettronica con Linux.
Kmail si blocca e non va piu' avanti costringendomi al kill; Spruce, un
programma di posta elettronica di cui si parla
sulla rivista LinuxC di
allora eccovi la schermata d'errore
che mi da subito dopo che avvio l'installazione di linux dopo aver premuto il
tasto enter all'atto della richiesta se installare linux o F1 per le options in
tutte e due i casi mi da l'errore:
(premetto che con la mandrake 7.1
questo errore non lo da)
Je ne connais pas grand'chose en linux. Cependant, lors de ma premiere
installation de mandrake 7.0, il y a trois jours, j'ai eu le même problem.
J'avais choisi l'option
Custom.
Si tu as mandrake sur une partition toute seule, tu n'as
qu'à démarer l'ordinateur avec ton cd-rom de mandrake
et
Title: RE: [newbie]printing
Or, when you select the object or file you want, hold down the shift key and then click, you should get a save to box that will start the download to a location like /home/dennis/ filename. That is the quickest way I know of to start a download. You can change the
What happened to the VIA Chipset and 7.2?
I have 7.1 Running on my SOYO 6VBA133 M/B with the VIA Apollo Pro
Chipset. Yet while attempting a fresh install of 7.2 or an upgrade
through FTP install, I can't get past the hard drive partition setup
portion of the install. Using the expert mode on
subscribe
Jamie Kerwick wrote:
To quote mandrakeuser.org,
"In LM 7, run
XFdrake
as 'root'. For enhanced options, try XFdrake --expert
If these don't work for you, try XFree's own setup utility
xf86config"
Jamie
Guys, I don't know what the diff is, but on my setup, (using the 3DFX stuff
On Mon, 13 Nov 2000, Donald Jr Saxton wrote:
Hello, All.
Just a quick question...Please don't kill me.
What does i386, i486, i586 refer to?
Intel 386 , Intel 486 and Intel 586
_
Get Your Private, Free
You are using RPMs that were intended to be used with an older version of RPM
than the one you have. I would suggest using the --nodeps and --force flags for
the install if a test run of doing the rpm indicates that there are no other
unsatisfied dependencies
[EMAIL PROTECTED] on
I know that XF86Setup is case sensitive but the problem I have is with
xf86config. this one IN NOT case sensitive and the "command not found"
errors he gives me are internal (i think) it's not the same thing has when
you write some shit on the console and he says "command not found" but this
one
Heavy. We need more detail. Copy us /usr/X11R6/lib/X11/XErrorDB which gives the
details of the errors. You look in /usr/X11R6/bin and there is something like
Xconfigurator or Xfsetup or something along those lines that you can execute
from the command line that will get you sorted without
i have an error in mandrake 7.2
i have an error connection refused by foreign host...
could you help me ?
Krulo,
Are you attempting to run this command as root (su)? If not, that would be
why you're getting this error.
Try this...
At the LILO prompt type linux 3. That will drop you at a console
login. Login as root and at the command prompt type setuptool. From here
you can configure X-windows far
Guys...guys.the correct command is "setuptool". This will bring up the
interface that will allow you to configure not only X-windows, but sound,
mouse, and a few other things that I can't think of at the moment.
--
Mark
Larry is NOT a cucumber...he's a stinkin pickle...
WITH WARTS!
Hello,
I am trying to install Mandrake 7.2 in an old Pentium 200 MMX with a Toshiba
CDROM XM6102B, but the installer doesn't recognized this CDROM model; it
gives me question about if it is an IDE or SCSI CDROM, and doesn't
recognized it as IDE, but it seems that there is not any special module
I tried following these steps, however, the GLX file doesn't make properly
because on my system the .../modules/extensions dir doesn't exist, there is
a file called extensions but no dir, also some of the settings, in
XF86Config file, that i need to change aren't there in the 1st place. when
One option is to copy the contents of the CD onto your windows partition and
then boot an install floppy, hit F1 for options and do linux all which will
allow you to choose your installation medium of choice which in your case is a
local FAT (windows) HDD partition
[EMAIL PROTECTED] on
Hello
Can anyone tell me what the file /proc/kcore is? Can I delete it?
Many thanks
Eduardo
Hello,
I was wondering whether anyone could help me with an installation
issue.
I have a Pentium machine running at 100mHZ, 32MB RAM, with a brand new
Sony 48X CD-ROM drive.
The installation proceeds smoothly until I try to swap CDs from the
installation CD to the Extensions CD. The Installation
well here is my situation:
I'm under a PI 120, 81Mb RAM, Mandrake 7.1
I already made it to setup sound card and ethernet but now the only thing
that I could do before (configuring X) is making me MAD! this is what I get
from some commands in the console:
XConfigurator
bash: XConfigurator :
Hi,
I installed PMFirewall recently and have been getting a ton of the same
message in my syslog and messages files - they are "deny" messages, but of my
own static IP address, so I must have something set up wrong.
As a consequence, these files have been getting huge, and have caused me some
is it not Xconfigurator (with a small c)?
-Original Message-
From: Krulo [mailto:[EMAIL PROTECTED]]
Sent: 13 November 2000 12:43
To: [EMAIL PROTECTED]
Subject: [newbie] (...) X is getting hard to get!! (setuptool???)
well here is my situation:
I'm under a PI 120, 81Mb RAM, Mandrake
It's my impression also that 4.x.x normally installs. I have seen depending
on which video card you have for it to install 3.3.6 instead. You can get
this as an option by doing an Expert install. Now of course, there is a whole
other range of issues that you will have to deal with yourself, so
I dont think so... I tried:
xconfigurator
XConfigurator
Xconfigurator
xConfigurator
xconfig
Xconfig
XConfig
xconf
Xconf
XConf
nothing works... anyone got any idead??
- Original Message -
From: "Lewis Bishop" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, November 13, 2000 1:23 PM
You have to run these as root.
--- Original Message ---
"Krulo" [EMAIL PROTECTED] Wrote on
Mon, 13 Nov 2000 11:18:05 -
--
I know that XF86Setup is case sensitive but the problem I have
is with
xf86config. this one IN NOT case sensitive and the "command not
found"
errors
1) you MUST be root to run xf86config
2) Do you know anything about your video card and monitor? Because
you'll need it to setup the proper xserver.
--- Original Message ---
"Krulo" [EMAIL PROTECTED] Wrote on
Mon, 13 Nov 2000 12:43:02 -
--
well here is my situation:
Well can you type in " mc " from the command line?
This will start MidnightCommander, which is a nice file-manager/viewer/editor
application.
There is also a command line in mc that you should be able to type in
rpm -i Uvh somename.rpm. This will get your packages installed, The cdrom is
on
I'm not in front of my computer at home but if I am not mistaken
you can set a rule to reject traffic from your IP, but I'll have
to look at my firewall at home to see how the syntax will go.
--- Original Message ---
philomena [EMAIL PROTECTED] Wrote on
Mon, 13 Nov 2000 08:26:29 +
some clever grepping for regexps recommended
[EMAIL PROTECTED] on 13/11/2000 14:08:06
Please respond to [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:
Subject: [newbie] Re: (...) is it not Xconfigurator (with a small c)?
I dont think so... I tried:
xconfigurator
XConfigurator
This is my problem... and I need help badly
When I installed 7.2 half way in the installation my USB keyboard
stopped working, but my USB mouse was ok all the way.
When The system rebooted the keyboard worked fine but the mouse was
dead.
In the aurora booting section the mouse didn't move,
Hi,
I am running Linux Mandrake 7.2 on a AMD Duron 700, 64meg ram.
The installation went okay except that HardDrake thinks my sound card is a
Ensoniq 5880 Audio PCI.
This driver works okay with Waves but not Midi files. I bought the card for
its midi wave table so I'm guttered!
I've tried
Can I assume that the Powerpack deluxe version of Mandrake v7.2 is the one most
of us would want to get? (full installs, with the ability to compile our own
software, and KDE v2.0 [not pre]?)
Thanks in advance! ;-)
--
I have a pctel modem installed on my computer with mandrake 7.0.
When dialing up the internet number everithing is going fine, but when
it says "starting pppd" it hangs up. I dont know if is the modem or the
drivers, i'm very newbie, like 2 months of xperience.
I have a voodoo 5 5500, pentium II 266, 128mb ram, with mandrake 7.0.
When I installed Red Hat 7.0 it automatically detected my voodoo 5 5500
but a friend told me that mandrake 7.0 was better then I installed
mandrake 7.0 but it didn't detect my 3dfx card. What should I do?
Did you try XF86Configurator?
Hi
Head on over to http://linux.3dfx.com You'll find all the drivers you need
and good install instructions too, which is a bonus!
Good Luck!
"Admiral" Ian Bridgeman
8)
For Mandrake 7.0 you'll have to download the drivers for it.
Mandrake 7.2 has voodoo5 built in support.
--- Original Message ---
Mauricio Castro [EMAIL PROTECTED] Wrote on
Mon, 13 Nov 2000 12:42:04 -0300
--
I have a voodoo 5 5500, pentium II 266, 128mb ram, with mandrake
To quote mandrakeuser.org,
"In LM 7, run
XFdrake
as 'root'. For enhanced options, try XFdrake --expert
If these don't work for you, try XFree's own setup utility
xf86config"
Jamie
From: [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Re: (...) is it
Hello Mauricio , is your modem a winmodem? You say your modem is installed
on your PC. If so it is probably a winmodem and won't work under Linux
usually. If modem is external , it's usually going to work with Linux. Let
me know and I'll try to help if I can. Regards --
[EMAIL PROTECTED]
-
On Monday 13 November 2000 18:03, you wrote:
Hello Mauricio , is your modem a winmodem? You say your modem is
installed on your PC. If so it is probably a winmodem and won't work
under Linux
The future is here, winmodems under Linux:
http://www.linmodems.org
--
\ Christian A Strømmen /
\
I think you have the essence of the problem well-centered. In other words,
good assumption!
Civileme
On Monday 13 November 2000 15:59, you wrote:
Can I assume that the Powerpack deluxe version of Mandrake v7.2 is the one
most of us would want to get? (full installs, with the ability to
Arguably in your case Red Hat appears to be "better"...
[EMAIL PROTECTED] on 13/11/2000 15:42:04
Please respond to [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:
Subject: [newbie] I cant configure my 3dfx card
I have a voodoo 5 5500, pentium II 266, 128mb ram, with mandrake 7.0.
When
I have recently installed Mandrake 7.2 in my Toshiba Satellite 315CDS and
all running great except for the soundcard - OPL3-SA2/3/x sound chip. Tried
Harddrake and it cannot even see the card. Tried sndconfig but the same, I
have no sound. Does anyone have any idea. Any help would be really
On Monday 13 November 2000 16:41, you wrote:
I have a pctel modem installed on my computer with mandrake 7.0.
When dialing up the internet number everithing is going fine, but when
it says "starting pppd" it hangs up. I dont know if is the modem or the
drivers, i'm very newbie, like 2 months
Hello, All.
Just a quick question...Please don't kill me.
What does i386, i486, i586 refer to?
_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your
On Monday 13 November 2000 16:42, you wrote:
I have a voodoo 5 5500, pentium II 266, 128mb ram, with mandrake 7.0.
When I installed Red Hat 7.0 it automatically detected my voodoo 5 5500
but a friend told me that mandrake 7.0 was better then I installed
mandrake 7.0 but it didn't detect my
How do I determine free used disk space?
Thanks,
Don a novice Linux, but loving it user
_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public
intel based prossessor, 386, 486, or pentium.
CPUs. A pentium is an i (i.e. Intel) 586. A Pentium II or such is an i686. A
Pentium III or a Duron is (I think) an i 786
[EMAIL PROTECTED] on 13/11/2000 17:39:44
Please respond to [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:
Subject: [newbie] Terminalogy
Hello, All.
Just a quick
du and df. They both have good manpages explaining how to use them There are
also GUI versions.
[EMAIL PROTECTED] on 13/11/2000 17:41:07
Please respond to [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:
Subject: [newbie] free used disk space
How do I determine free used disk space?
Hello, All.
I recently installed an application as a root user an it placed icons on the
desktop. Logging in as another user does not have the icons on the desktop.
I tried to create icons but was unable to. Was receiving errors. What is it
that I need to do to give another user access to
Donald Jr Saxton wrote:
How do I determine free used disk space?
Thanks,
Don a novice Linux, but loving it user
_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about
Try the command du from a command prompt or use the kde program
Dale Kosan
Tech Support
Chi Corporation
26309 Miles Road #4
Warrensville Heights,Ohio 44128
Voice-1-800-828-0599
Fax-1-216-360-8301
[EMAIL PROTECTED]
www.chicorporation.com
On Monday 13 November 2000 11:39 am, Donald Jr Saxton wrote:
Hello, All.
Just a quick question...Please don't kill me.
What does i386, i486, i586 refer to?
Proccesors, eg, 368DX/40 (old AMD), 486DX2/66 (old Intel), and i586
is Pentium class, which includes other cpu's besides Intel.
get version 7.2 of mandrake which will automatically detect and
configure your V5. Mandrake 7.0 will not detect the V5 because it uses
x 3.3.6 and you need x 4.01.
Abe
[EMAIL PROTECTED] wrote:
Arguably in your case Red Hat appears to be "better"...
[EMAIL PROTECTED] on 13/11/2000
Benjamin
The 7.2 Complete Does Not include kde 2.0 final.
You can update it to 2.0 using Mandrake Update, except in 7.2 it is now just
Updates.
Charles
- Original Message -
From: "Benjamin Sher" [EMAIL PROTECTED]
To: "Newbie" [EMAIL PROTECTED]
Sent: Monday, November 13, 2000
On Sat, 11 Nov 2000, patrick wrote:
I have been trying to get xscreensaver to start when Mandrake 7.2 starts.
In Mandrake 7.1 Xscreensaver was part of the KDE screen saver, but It is not
part of the KDE screen saver in Mandrake 7.2. The screensavers in Mandrake
7.2 KDE are lame. How do I
On Mon, 13 Nov 2000, philomena wrote:
I will subscribe to that list, but my question is not really a
PMFirewall question - its about controlling the size of the system log
files - since I saw a syslog.gz , which I know I didn't create, I am
assuming there is some system utility that compressed
On Mon, 13 Nov 2000, Mitchell Hagerty wrote:
There was an error installing packages:
setup-2.1.3-22mkd, filesystem-2.0.5, ld.so, glibc,
termcap, libtermcap, readline, bash.
Go On anyway?
I click on 'Yes' and recieve this.
error opening RPM database: cannot open file /mnt/var/lib/
Title: RE: [newbie] size of log files
This also begs the question, is there a file or files that one should periodically clear out to prevent filling up a disk with garbage? I have found nothing in my reading that says it is necessary, but just maybe I missed it.
-Original Message-
Just a quick question...Please don't kill me.
What does i386, i486, i586 refer to?
These point to the intel (i) processors:
80 386
80 486
80 586 (pentium)
80 686 (pentium II)
Paul
--
http://nlpagan.net - ICQ 147208 - Registered Linux User 174403
Linux Mandrake
down
There was an error installing packages:
setup-2.1.3-22mkd, filesystem-2.0.5, ld.so, glibc,
termcap, libtermcap, readline, bash.
Go On anyway?
I click on 'Yes' and recieve this.
error opening RPM database: cannot open file /mnt/var/lib/
rpm/nameindex.rpm: Invalid argument...
You
Ok im about to loose my nerves rpmdrake wont accept any media that i tell it
it worked before but after (dont ask me why ) taking out the default media
(cdrom ) it tells me that it could not find any package and i should check if
my network drives are mounted in case i did a network install
"Donald Jr Saxton" [EMAIL PROTECTED] wrote:
How do I determine free used disk space?
Thanks,
Don a novice Linux, but loving it user
==
The command df in a terminal will return such info to you for all mounted
drives (including a floppy, if it happens to be mounted at the
On Monday 13 November 2000 21:50, Paul wrote:
Just a quick question...Please don't kill me.
What does i386, i486, i586 refer to?
These point to the intel (i) processors:
80 386
80 486
80 586 (pentium)
80 686 (pentium II)
so 786 is pentium III ?
I have never experienced any package
How come the tarball i downloaded from sun this morning with their newest java
in it was an ...i386.tar.gz then? Wouldn't you think they of all co's (except
of course Mandrakesoft) would be up to date on their optimization?
my .02 US
Vic wrote:
the i386 means optimised for the old 386
On Mon, 13 Nov 2000, Christian A Strømmen [Number1/NumeroUno] wrote:
80 386
80 486
80 586 (pentium)
80 686 (pentium II)
so 786 is pentium III ?
Don't know, I have never seen that.
I have never experienced any package meant for 586 og 686 that have
conflicted with my system (running
Thanks, Paul.
From: [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Terminalogy
Date: Mon, 13 Nov 2000 17:40:41 +
CPUs. A pentium is an i (i.e. Intel) 586. A Pentium II or such is an i686.
A
Pentium III or a Duron is (I think) an i 786
Jeff Malka wrote:
Is there a way to force it to install in a specific directory. Like /opt?
When I do a TAR -zxvf filename then I run ./configure, make and make
install, I can see on the console screen that there's nothing wrong after
the install. My big problem is not knowing where
civileme wrote:
I think you have the essence of the problem well-centered. In other words,
good assumption!
Civileme
On Monday 13 November 2000 15:59, you wrote:
Can I assume that the Powerpack deluxe version of Mandrake v7.2 is the one
most of us would want to get? (full installs,
You could give the group owner and group rights to write and everyone else
just read rights. Then put anyone you want to have the ability to write
into the group
Kevin
On 13 Nov 2000, Ramandeep wrote:
i am using mandrake 7.1. by default my win98 c:\ d:\ and
e:\ drives are mounted in
Dale Kosan wrote:
You are using Netscape I bet,right click on the file or link and choose save
as.The other way,as you have found out is not easy to understand.After all
the code is done,go up to file,save as and you are done.Just easier to right
click...
You can also shift left
Okay, I'm currently using ipchains/PMFirewall. My question is, since I *think*
I've got everything installed correctly (the script said it installed OK),
should I not be able to see PMFirewall running, using something like ktop or
top, after I've connected to the 'Net? I picked the options where
Try df This will give you the amount of freespace on all your mounted
partitions
On Mon, 13 Nov 2000, Donald Jr Saxton wrote:
How do I determine free used disk space?
Thanks,
Don a novice Linux, but loving it user
_
Hi Paul,
That was it - I did a 'man logrotate' and got tons of info - the files can be
controled based on timing as well as size - very neat.
Thanks for the pointer,
philomena
On Monday 13 November 2000 08:18 pm, you wrote:
On Mon, 13 Nov 2000, philomena wrote:
I will subscribe to that
In Netscape press and hold the shift key while you click the url to
download the file.
On Mon, 13 Nov 2000, Marcia wrote:
Dear All, I went to the site to download Cups and I got alot of computer
language or code printout to my screen instead of an RPM package that I
expected. I went to a
On Monday 13 November 2000 16:38, you wrote:
Hi all,
I have a dell inspiron 3700 pIII 450mhz, I installed ver 7.2 and everything
worked fine. When I installed linux I had my usb iomega zip drive
installed. During the installation the os found the zip drive, and
installed the folder in the
Huh, good question.
On Mon, 13 Nov 2000, -michael- wrote:
How come the tarball i downloaded from sun this morning with their newest java
in it was an ...i386.tar.gz then? Wouldn't you think they of all co's (except
of course Mandrakesoft) would be up to date on their optimization?
my
I dont know what else to do... I already tried XF86Config, XF86Setup,
Xconfigurator... the first gives me internal "command not found" errors,
like
"/usr/X11R6/bin/xf86config: modeline: command not found"
the other 2 run well but everytime I try to "startx" he starts and exits
imediatly with this
Hello Friends,
Yesterday i was installing Mandrake 7.2 on
AMDk7 - 750MHz, VIA- Chipset(Soyo Mother board)
128MB, Diamond Viper 200(32MB)AGP and 30GB Hard
Disk
I had 4 partitions on this Harddisk, is connected to primary
IDE (master), of the following size
1) Partition 1 = 6000GB
2) Partitoon 2
Civileme,
Welcome back to the list! It's great to see you posting once again. It has
been a while. How is everything with you these days?
--
Mark
Larry is NOT a cucumber...he's a stinkin pickle...
WITH WARTS!
registered linux user # 182496
=/\= PINE 4.21
Download the package rp-pppoe from Roaring Penguin.com. Follow the installation
instructions contained in the tar package. Piece of cake. Ihave DSLfrom
Verizon also. Works like a charm!
--
Glenn Johnson
[EMAIL PROTECTED]
Registered Linux user #175132
Powered by Linux-Mandrake 7.1
can someone help me setup my server for my new domain
name...
this is the first time doing this...
I have Mandrake 7.02 with Apache 1.3.9
--
Registered Linux User:167369
=KompuKit=
Kit Goins ICQ# 7110071
just how big deem hard drives? and where did you get a 6000 gig. drive
anyway, from the starship Enterprise? Kirk will be mad.
- Original Message -
From: "Raju Krishnappa" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, November 13, 2000 5:46 PM
Subject: [newbie] Problem with
Use:
tar -zxvf filname -C /directory/where/you/want/it/to/go
HTH,
Bill
P.S. Uppercase C
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of gcobb
Sent: Sunday, November 12, 2000 4:19 PM
To: [EMAIL PROTECTED]
Subject: [newbie] Tar Installs
I've got this
On Monday 13 November 2000 04:43 pm, Krulo wrote:
I dont know what else to do... I already tried XF86Config, XF86Setup,
Xconfigurator...
try typing 'apropos xf86' you'll get back a ton of
commands/statements related to XF86 Prob'ly towards the end of the
output you'll see :
Charles A Edwards wrote:
Benjamin
The 7.2 Complete Does Not include kde 2.0 final.
You can update it to 2.0 using Mandrake Update, except in 7.2 it is now
just Updates.
Charles
- Original Message -
From: "Benjamin Sher" [EMAIL PROTECTED]
To: "Newbie" [EMAIL
Ed Tharp wrote:
just how big deem hard drives? and where did you get a 6000 gig. drive
anyway, from the starship Enterprise? Kirk will be mad.
- Original Message -
From: "Raju Krishnappa" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, November 13, 2000 5:46 PM
Subject:
1 - 100 of 125 matches
Mail list logo