On Mon, 23 Aug 2004 08:58:17 +0200
Vincent Voois [EMAIL PROTECTED] wrote:
If your SATA bios already has troubles with both drives i would
suggest the following:
First check your master/slave jumpers on the harddrives (are they
correctly set?)
One of the drive's labels states;
On Mon, 23 Aug 2004 00:18:48 -0400
Greg Meyer [EMAIL PROTECTED] wrote:
I'm really not trying to be rude, just practical, but since this
question actually has nothing to do with Linux, the support site
for your card or motherboard might be a better place to ask about
this.
Yeah... I meant to
On Mon, 23 Aug 2004 18:42:36 +0200
Vincent Voois [EMAIL PROTECTED] wrote:
If the drive is ticking / clicking when operating, this sounds not
good, but you know for sure if you attach the drive to a
single-bus IDE connector.
Unfortunately, the drive has no IDE connector.
If you
On Mon, 23 Aug 2004 19:52:28 +0200
Vincent Voois [EMAIL PROTECTED] wrote:
http://www.info.univ-angers.fr/pub/richer/ens/deug2/ud44/img/dd4.jpg
- the dark-grey strip covers a very large space.
The newer techniques pasting the top plates onto the bottom-case.
It is much better, but i still
I'm trying to set up RAID 1 array with two 160G WD Caviar disks.
Both disks are new and blank
POST shows the RAID PCI card but shows one disk as 0 MB.
Switching cables, positions on the PCI card and the PCI slots
themselves makes no difference. When I go into the SATA setup and
choose RAID 1 the
I have Mdk 10.0 on hda and just put Slackware 10.0 on hdc then
thought I'd put Mdk on hdc's remaining space.
The install fails after choosing language and accepting the
agreement.
Eventually it drops to the shell and says ...exited with signal 8
The last thing I see before the error
On Mon, 16 Aug 2004 17:37:32 -0500
John Drouhard [EMAIL PROTECTED] wrote:
as root,
modprobe snd_seq_oss snd_mixer_oss snd_pcm_oss
john
# modprobe snd_seq_oss snd_mixer_oss snd_pcm_oss
FATAL: Error inserting snd-seq-oss
(/lib/modules/2.6.3-7mdk/kernel/sound/core/seq/oss/snd-seq-oss.ko.g
On Tue, 17 Aug 2004 08:07:05 -0500
John Drouhard [EMAIL PROTECTED] wrote:
# modprobe snd_seq_oss snd_mixer_oss snd_pcm_oss
FATAL: Error inserting snd-seq-oss
(/lib/modules/2.6.3-7mdk/kernel/sound/core/seq/oss/snd-seq-oss.
ko.g z): Unknown symbol in module, or unknown parameter (see
On Tue, 17 Aug 2004 18:45:25 +0200
Frans Ketelaars [EMAIL PROTECTED] wrote:
I think modprobe accepts only _one_ module name as parameter, so
you would use:
# modprobe snd_seq_oss
# modprobe snd_pcm_oss
# modprobe snd_mixer_oss
#
If you get back the command prompt everything went ok, but
I'm getting no sound while playing .mov files in Totem.
What should I be looking for to resolve this issue?
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
On Mon, 16 Aug 2004 13:57:13 +0100
Derek Jennings [EMAIL PROTECTED] wrote:
On Monday 16 Aug 2004 13:35, C. Tresenriter wrote:
I'm getting no sound while playing .mov files in Totem.
What should I be looking for to resolve this issue?
Is it just .mov files?
Possible causes may
My last post was a little misleading.
I had tried alsa before I'd posted the original question.
Don't remember exactly when I saw the ...null output messaage but
it wasn't when I tried alsa - that just gave no sound as with oss.
Want to buy
On Mon, 9 Aug 2004 18:11:58 -0700
Roland Hughes [EMAIL PROTECTED] wrote:
Have they got a Boinc client yet? The Seti group are going to the
Boinc Boinc client in order to share the many pc's that currently
run Seti. Roly
Did a bit of research and found this.
Similar aims as [EMAIL PROTECTED]
On Fri, 06 Aug 2004 01:16:11 -0600
Charlie Mahan [EMAIL PROTECTED] wrote:
Thanks for reminding me! I totally forgot to turn the protein
folding back on when I switched to the new machine. Woops. Two
weeks lost. Thank {Deity} the old system is still chugging away.
Charlie
- --
I just
On Fri, 06 Aug 2004 08:08:42 -0600
Charlie Mahan [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Friday 06 August 2004 04:42:04, C. Tresenriter wrote:
On Fri, 06 Aug 2004 01:16:11 -0600
Charlie Mahan [EMAIL PROTECTED] wrote:
Thanks for reminding me! I
I must have misunderstood you.
I have kde set to save the session when booting up and had the
folding client running in a terminal on an unused desktop but on
rebooting it didn't start.
Obviously there's something else I need to do.
What is it I'm missing?
Curt
On Thu, 2004-07-29 at 17:27, Stephen Kühn wrote:
On Fri, 2004-07-30 at 03:22, C. Tresenriter wrote:
On Thu, 2004-07-29 at 12:16, Stephen Kühn wrote:
So do I understand correctly that I must start from the gnome desktop to
access this?
Either run it from a run dialogue, or from
On Thu, 2004-07-29 at 10:58, Stephen Kühn wrote:
On Fri, 2004-07-30 at 01:40, C. Tresenriter wrote:
Where is the file that I would edit to make links in Evolution open
opera rather than konq?
I'm using kde for now.
Thanks
gconf-editor = desktop = gnome = url-handlers = http
stephen
On Thu, 2004-07-29 at 12:16, Stephen Kühn wrote:
So do I understand correctly that I must start from the gnome desktop to
access this?
Either run it from a run dialogue, or from a terminal.
stephen kuhn - proprietor
Thanks... didn't have it installed.
I am trying to set up network printing through an SMC Barricade
router (4 port)
I have tried several configurations with no success so far.
I've entered the Gateway address for the Barricade but
I believe that the default port (9100) is incorrect.
How do I determine what port is used for printing?
On Wed, 21 Jul 2004 21:53:02 +0300
Amichai Rotman [EMAIL PROTECTED] wrote:
Hi Curt,
If you're using the CUPS system, you need to enable port 631
HTH,
Thanks Amachai,
Haven't quite got it figured yet but I'm getting closer.
Curt
Want to
I'm attempting an upgrade as a last ditch effort after getting
nowhere trying to troubleshoot a Kernel panic : No init found
error.
It's Mdk 10.0 Official
Can anyone tell me what might be the problem from the error message?
Entering step 'Language'
Gdk-Warning ** locale not supported by
On Fri, 9 Jul 2004 07:07:39 -0400
Bryan Phinney [EMAIL PROTECTED] wrote:
arts is the default sound system in KDE. You can, however, turn arts
completely off and use OSS directly, you just won't get sounds in KDE or if
you do get sounds, they won't coexist with other items such as xmms.
I have 10.0 Official installed and get sound with Realplay but xmms
has problems.
When I load a CD to play and click on a track it crashes.
If I start a stream, it buffers and looks like it's connected - shows that
it's a stereo signal, but there's no sound and the timer sits at zero.
Then if I
On Thu, 8 Jul 2004 14:08:38 -0400
Bryan Phinney [EMAIL PROTECTED] wrote:
Yes. Install the xmms-aRts plugin and open up xmms, go to
Options, preferences and under output plugins, select the newly
installed Arts plugin. Change the buffering to your desire and
you should be good to go.
--
On Fri, 9 Jul 2004 02:58:26 +0700
Bambang Gunawan [EMAIL PROTECTED] wrote:
Try at xmms Preferences Output Plugins, choose arts output
Umm embarrassed smiley yeah, but it's greyed out.
use command: rpm -qa|grep xmms
you'll see in there
Yop there it is.
Bambang
On Thu, 8 Jul 2004 19:54:54 -0400
Greg Meyer [EMAIL PROTECTED] wrote:
Open xmms, Click on the O before you play any file. Then
Preferences. Under Audio I/O Plugins, look in the lower pain,
you should see Output Plugin and it will be set to something
like alsa or oss. Click on the drop
On Thu, 8 Jul 2004 19:39:10 -0400
Bryan Phinney [EMAIL PROTECTED] wrote:
On Thursday 08 July 2004 07:17 pm, C. Tresenriter wrote:
Umm embarrassed smiley yeah, but it's greyed out.
Just to make sure that you are not expending time on something
that is not a problem, why not try
On Thu, 8 Jul 2004 18:59:49 -0400
Bryan Phinney [EMAIL PROTECTED] wrote:
Open xmms, Click on the O before you play any file. Then Preferences. Under
Audio I/O Plugins, look in the lower pain, you should see Output Plugin and
it will be set to something like alsa or oss. Click on the
On Thu, 8 Jul 2004 21:44:52 -0400
Bryan Phinney [EMAIL PROTECTED] wrote:
On Thursday 08 July 2004 09:28 pm, C. Tresenriter wrote:
That did it!!
The CD's playing with the OSS output plugin - with the
aRts plugin it still crashes.
So it KDE's sound system that needs tweaking??
My
On 06 Jul 2004 16:09:52 -0400
Eric Scott [EMAIL PROTECTED] wrote:
I recently reinstalled Mandrake Linux 9.1 on my good ol' Pentium 1 @
233Mhz. It's an old computer, but it had a 40x12x48 CD RW drive. I have
sound up and running fine (via sndconfig), but the CD player still
doesn't play
Anyone have an opinion on the best way/program to burn a bootable iso to a DVD -R
disk?
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
On Tue, 22 Jun 2004 08:48:12 -0500
Mikkel L. Ellertson [EMAIL PROTECTED] wrote:
C. Tresenriter wrote:
Appears I spoke too soon.
Once I put the CD/DVD back on the cable I got the error again.
BOth units are set to the cable select position.
H.
?
Strange. I wonder
On Tue, 22 Jun 2004 10:06:01 -0400
Bryan Phinney [EMAIL PROTECTED] wrote:
You might do better to change the jumpers from cable select to
explicit master/slave if you are trying to hook a hard drive up to the
same controller as as CD/DVD. Also, Make the hd the master, not the
CD/DVD device.
What you can do with Linux
http://www.dashpc.com/
(if you have a lot of money!)
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
On Fri, 18 Jun 2004 15:58:35 -0500
Mikkel L. Ellertson [EMAIL PROTECTED] wrote:
Dumb question time - Are the connectors on that cable labeled for
where they should be plugged in? (Motherboard, drive 0, drive 1) If
so, are you plugging things in the correct place? You may also have
to try
On Mon, 21 Jun 2004 08:56:13 -0500
Mikkel L. Ellertson [EMAIL PROTECTED] wrote:
If I were you, I would try changing to cable select, and see if that
fixes the problem. I know that one setup I have does not work right
when useing the cable select cable, and jumpering as master, or slave.
On Mon, 21 Jun 2004 13:57:08 -0500
C. Tresenriter [EMAIL PROTECTED] wrote:
Well that seems to have solved the issue, it's booting from the
primary channel, master position on the cable.
Guess I'll leave well enough alone.
Appears I spoke too soon.
Once I put the CD/DVD back on the cable I
I'm trying to determine if my hard disk is bad or if the problem is
motherboard related or something else entirely.
When booting 10. CE, after running POST, I occasionally get:
Disk boot failure: Insert systems disk and press enter to continue
Yesterday I received a replacement mobo from ASUS,
I'm running 10.0 official - updated from CE via downloaded iso's
I can't seem to add a source for a main mirror.
I've tried seven or eight different ones over the last two days trying both MCC and
urpmi with no luck.
Sources for plf, contrib, updates and a local folder were added with no
On Thu, 6 May 2004 07:01:38 -0400
Bryan Phinney [EMAIL PROTECTED] wrote:
On Wednesday 05 May 2004 08:14 pm, C. Tresenriter wrote:
XF86Config-4 is the same as 9.2 except the Device line in the Input
Devices section says /dev/mouse where in 9.2 it says /dev/psaux... Changing
it didn't help
If I go through startmultimediasound, xmms will load up and after entering the URL
for the stream, it buffers the looks like it's playing - it shows a stereo signal and
the address - but there's no sound and the timer stays at zero.
In addition, afterwards, it will not close not via the GUI or
I've just installed 10. CE and find that I can no longer scroll windows contents with
the wheel.
It's a USB cordless plugged in to a USB/PS2 converter which still works fine in 9.2
XF86Config-4 is the same as 9.2 except the Device line in the Input Devices section
says /dev/mouse where in 9.2
NTP will synchronize your clock to UTC time. It will also maintain a
drift file and get better with time at holding the machine's clock
accurate.
You can't set your clock to a local timezone.
Rick,
Just realized your reply to: is set to your address so you'll get this
twice.
Thanks for the
I just started gFTP to get the 10.0 iso and it is proceeding and only
with occasional interruptions to the xmms stream
I was using Opera's download manager which may have been part of the
problem. I've lowered the Audio Buffer size (KDE) which seems to have
improved the situation - though
My 9.2 upgrade (from 9.1) seems to be having a problem.
I'm downloading the 10.0 betas but when I start the download it
interrupts the stream playing on xmms - and then the stream will not
reconnect - it will hang at the connecting phase or during buffering.
On occasion it will start the stream
I've recently upgraded from 9.1 to 9.2 and ever since I can't seem to
make the clock keep correct time - everything else seems to be ok.
At this moment, it's either 7 hours fast or 5 hours slow it's 11:08
CST but the clock reads 6:08.
I chose ntp to sync time - just like I did in 9.1, so I'm
I've been unable to figure out why xmms will sometimes load a directory
(/mnt/cdrom1) and sometimes it won't.
There seems to be no rhyme or reason for it.
Has anyone dealt with this behavior?
--
Great spirits have always found violent opposition from mediocre minds.
The latter cannot
I'm trying to get xawtv running here.
Output tells me:
This is xawtv-3.88, running on Linux/i686 (2.4.21-0.26mdk)
can't open /dev/v4l/video0: No such file or directory
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/v4l/video0: No such file or directory
v4l2: open
On Thu, 11 Dec 2003 15:32:06 -0800
EH wrote:
| # Default runlevel. The runlevels used by Mandrake Linux are:
| # 0 - halt (Do NOT set initdefault to this)
| # 1 - Single user mode
| # 2 - Multiuser, without NFS (The same as 3, if you do not have
| # networking) 3 - Full multiuser mode
|
On Sun, 07 Dec 2003 12:42:50 +
JRS wrote:
~*~*~*~*~*~*~*~*~*~snip*~*~*~*~*~*~*~*~*~
| Clearly , it's about whether I want to,
| a) UPS my attic power supply, running 3 computers, and surge protect
| only the one.
| b) surge protect all 4 computers, no ups.
| c) just accept the risks.
|
| But
On Tue, 2 Dec 2003 04:36:01 -0500
J wrote:
| On Mon, 1 Dec 2003 20:16:13 -0600
| C. Tresenriter [EMAIL PROTECTED] wrote:
|
| not even the updated kernel. Everything already installed... for
| each.
|
| Well, you must be already up-to-date with at least the packages in
| main, ie. Gnome 2.4
This doesn't seem right to me...
On my 9.1 system,
urpmi --auto-select -a returns:
One of the following packages is needed:
1- NVIDIA_kernel-2.4.21.0.13mdk-4321-3mdk.i586
2- NVIDIA_kernel-enterprise-2.4.21.0.13mdk-4321-3mdk.i586
3- NVIDIA_kernel-smp-2.4.21.0.13mdk-4321-3mdk.i586
4-
On Mon, 1 Dec 2003 11:51:59 -0500
J wrote:
|On Mon, 1 Dec 2003 10:40:20 -0600
|C. Tresenriter [EMAIL PROTECTED] wrote:
|
| I've been running the default kernel from the beginning and all
|hardware is the same as when I originally installed.
| What would cause any of these packages to be needed
On Mon, 1 Dec 2003 12:07:23 -0500
BP wrote:
|Because one of the packages that you are trying to install was built
|with an NVIDIA kernel, even though you don't have an NVIDIA card. You
|need to check your sources to see where you are pulling files from, a
|lot of the Texstar packages require
On Mon, 1 Dec 2003 14:19:44 -0500
BP wrote:
| Well, the choice is up to you but the standard Mandrake 9.1 kernel is
| up to 2.4.21-0.25mdk, IIRC so that would match with that package. If
| you have not upgraded to this version yet, you may be missing some
| security updates that have been added
On Mon, 1 Dec 2003 14:55:28 -0500
J wrote:
| On Mon, 1 Dec 2003 14:19:44 -0500
| Bryan Phinney [EMAIL PROTECTED] wrote:
|
| Once again, that is not a kernel. If you look at the size, it is 648K,
| the kernel is over 20MB.
|
| It is a driver module with the kernel version attached so you know
|
On Mon, 1 Dec 2003 20:08:58 -0500
J wrote:
| I would still investigate some way of skipping it altogether, since
| any apps you are going to be running that require GL rendering are
| just going to use your ATI driver, no?
Makes sense to me.
|
| Maybe just try this instead:
|
|
On Mon, 1 Dec 2003 20:16:40 -0500
BP wrote:
Well, you could instead choose NVIDIA_kernel-2.4.21.0.25.2tex-4496.i586
which will give you the latest Mandrake Kernel along with the Nvidia
module which will not load for you. That way, no more issues about
dependencies from the Texstar packages.
On Mon, 1 Dec 2003 20:16:40 -0500
BP wrote:
| On Monday 01 December 2003 07:18 pm, C. Tresenriter wrote:
|
| Would 'urpmi kernel-2.3.21-0.25mdk' be a mistake?
| If so, what would be the proper way to do it?
|
| Well, you could instead choose
| NVIDIA_kernel-2.4.21.0.25.2tex-4496.i586
On Tue, 25 Nov 2003 11:57:12 -0800
MK wrote:
|Sorry if this is repeat, got a bounce from sympa that the original was
|Interpreted to contain a command.
|
|
|OK, I'll admit I'm just jumping a step and going right to those who
|have more time in the trenches w/ Linux. I'm taking a class that
On Mon, 17 Nov 2003 06:21:31 +
E wrote:
|have you tried the alternet kernels? and have you tried the 'noapic' ?
After countless attempts at installing 9.1, using alt0 and alt1 - along
with the stock kernel, with and without 'noapic', the farthest I can get
is packages beginning to install
On Mon, 17 Nov 2003 06:21:31 +
E wrote:
[]
|have you tried the alternet kernels? and have you tried the 'noapic' ?
linux noapic goes as far as formatting the first partition and hangs
with the caps lock and scroll lock lit up on the keyboard.
I seem to remember doing an alternate
On Sun, 16 Nov 2003 19:42:49 -0600
CT wrote:
|On Sun, 16 Nov 2003 19:37:44 +
|SN wrote:
|
||I'm having some problems with my ATAPI 52x CD-Rom.
[...snip...]
I said:
[...snip...]...to
|theappend line in your /etc/fstab. That's it.
DOH! (slap) I meant to say lilo.conf
Sorry
I know no
On Sun, 16 Nov 2003 19:37:44 +
SN wrote:
|I'm having some problems with my ATAPI 52x CD-Rom. It's supposed to be
|my reader device in K3B, but right now it doesn't work. It isn't
|currently set to scsi, but I don't know how to make it that way. What
|could I do to get my CD Reader working in
After several attempts to install 9.0, 9.1 and 9.2 on a PT-5VMD
mobo (VIA MVP3 chipset), I finally got through the formatting stage and
packages began to install and then crashed with a (now) familiar
message that I've seen at different stages - sometimes right after
booting, sometimes when
On Thu, 23 Oct 2003 08:46:01 -0400
T wrote:
|I have recently found that I need to desperately upgrade my Mandrake
|9.0 installation. I noticed a few discussions on this list that deal
|with apt and urpmi as upgrade tools. Which is the best option and where
|can I get information on installing and
On Wed, 15 Oct 2003 09:20:33 -0400
LW wrote:
|On Tue, 14 Oct 2003 19:39:24 -0400
|Paul Kaplan [EMAIL PROTECTED] wrote:
|
| Does anyone use VMware successfully on Mandrake 9.2?
| Paul
|
|
|Works fine. Remember to install the source for the kernel and
|VMware takes it from there.
|
|It's all
Has anyone been able to search the archives this past weekend?
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On 13 Oct 2003 08:48:29 -0400
ET wrote:
|try the ones at marc.theaimsgroup.com
|--
|++
|Mandrake HowTo's More: http://twiki.mdklinuxfaq.org
Cool! Thanks Ed
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Fri, 10 Oct 2003 10:00:11 +0100
DJ wrote:
IF I can jump in here
I'm trying to add my CDROMs (powerpack 9.1) to the software sources
|To do that from Mandrake Control CentreSoftwareSoftware Source
|Manager select all the entries for your CDs and delete them. Close the
|GUI
|
|Insert CD1
On Sat, 11 Oct 2003 17:14:47 +0200
HJB wrote:
|You have to specify the RPMSx directory (where x is the number i.e.
|removable://mnt/mnt/cdrom/Mandrake/RPMSx with ../synthesishdlist.cz
|
|good luck,
|HarM
Ahhh... Thanks HarM! good to know.
curt
Want to buy your Pack or Services from
I've recently added scsi emulation for my ATAPI CDROM, would this be the
reason I see, unable to retrieve pathname for removable medium for all
CDs when I try urpmi?... and if so where do I change the path to scd1
for the sources?
Thanks
Want to buy your Pack or Services from MandrakeSoft?
Go to
On Fri, 10 Oct 2003 19:15:27 +0100
DJ wrote:
|On Friday 10 Oct 2003 5:21 pm, C. Tresenriter wrote:
| I've recently added scsi emulation for my ATAPI CDROM, would this be
|the reason I see, unable to retrieve pathname for removable medium
|for all CDs when I try urpmi?... and if so where do I
The file is a power point package presentation - as opposed to .pps
A google search turned up a suggestion for Open Office Draw (Impress)
but it wouldn't do it, complaining of a wrong format
If you want to try, it's the link at the first bullet point (Demo) here:
On Tue, 30 Sep 2003 07:54:34 -0500
TO wrote:
|I have a Maxtor model 4W030H2 30GB drive I would like to make the Slave in a
|dual Master-Slave setup.
|
|What is the correct jumper setting to make the Maxtor the Slave drive?
IIRC the settings are not the same for all drives.
Search here:
On M
Miark [EMAIL PROTECTED] wrote:
|Where?
|
|Miark
|
|http://www.texturizer.net/firebird/extensions.html
|On Thu, 25 Sep 2003 11:10:23 -0500, Curt Tresenriter [EMAIL PROTECTED] wrote:
|
| |I'm using Opera because I'm addicted to mouse gestures. Is there a
| |OpenSource alternative with this
http://newsforge.com/article.pl?sid=03/08/27/1918229
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
At 03:05 PM 8/1/03 -0300, you wrote:
Hi, first, sorry for my english, is not soo good.
That it´s my firs week with Linux, and more i don´t
know.
The Linux Mandrake 9.1, have detect my sound card
(Creative SoundBlaster Audigy 2), in the control
center of linux mandrake apear emu10k2, thats if i
There's plenty of blame to go around.
It takes two to tango.
It's just like politics... the Republicans blame Democrats and Democrats
blame Republicans.
The truth, I think lies somewhere in between.
At 11:42 PM 7/22/03 -0400, you wrote:
On Tue, 22 Jul 2003 22:28:53 -0400
Brant Fitzsimmons [EMAIL
At 02:08 PM 6/28/03 -0600, you wrote:
quoting Curt Tresenriter; Saturday 28 June 2003 12:37 pm:
Just as I was about to go to town on this sylpheed tarball, I read
Eric's post on 'make install' - then Derek's page on checkinstall.
Decided that was a good idea 9building an RPM from a tarball) so
On Tue, 24 Jun 2003 21:11:41 -0700
Eric Huff [EMAIL PROTECTED] wrote:
I'll google for the manual - there has to be one right?
Yeah, check here:
http://sylpheed.good-day.net/
http://sylpheeddoc.sourceforge.net/en/welcome.html
Found one for 0.8.3... maybe I missed it - I'll check again.
On Wed, 25 Jun 2003 06:19:21 -0700
owenb [EMAIL PROTECTED] wrote:
How do I get a response concerning defective Mandrake merchandise?
I tried what e-mail and phone number I could find without any response.
I bought, The Definitive Manual for version 9.0 just prior to the
release of the 9.1
On Wed, 25 Jun 2003 08:50:58 -0400
Charles Roberts [EMAIL PROTECTED] wrote:
Hi John;
Not sure if I understand all you have said! But to boot two OS:
1st OS install lilo in MBR
2nd OS install lilo in the 2nd OS's hard disk partition. like this
root=hda5, boot=hda5 Change hda5 to where ever
On Tue, 24 Jun 2003 06:23:35 -0400
JoeHill [EMAIL PROTECTED] wrote:
On Tue, 24 Jun 2003 05:21:54 -0500
C. Tresenriter [EMAIL PROTECTED] uttered:
This happened a couple days ago - following some advice here, I
removed all the CD sources to rely on the 'main' that I have added
I just re-booted to hdd - 9.0 install - to look at settings for sylpheed and play with
xmms. When I tried to get back into 9.1, it halted with :
EXT3-fs error (device ide0 (3,1): ext3_get_inode_loc: unable to read inode block -
inode 259074, block 524290
Kernel panic: Attempted to kill init!
On Mon, 23 Jun 2003 21:15:02 -0700
eric huff [EMAIL PROTECTED] wrote:
Are you sure you don't have a browser open somewhere that's it's
tabbing too?
I am using claws 9.0, but it's manual is at:
file:///usr/share/sylpheed/manual/en/sylpheed.html
eric
There's a manual in
On Tue, 24 Jun 2003 11:15:08 +0100
John Richard Smith [EMAIL PROTECTED] wrote:
Miark wrote:
Drew,
1) Configure a Texstar source for urpmi:
urpmi.addmedia texstar
http://www.ibiblio.org/pub/linux/distributions/contrib/texstar/mandrake/9.1/rpms/
with ./synthesis.hdlist.cz
all
What kinds of problems might I encounter mixing anything with RPMs on my 9.1 install?
I found a compression format for audio yesterday that I want to use - .shn - but the
program isn't made in an RPM.
thanks
c
Want to buy your Pack or Services from MandrakeSoft?
Go to
On 24 Jun 2003 22:17:08 +1000
Stephen Kuhn [EMAIL PROTECTED] wrote:
On Tue, 2003-06-24 at 21:28, C. Tresenriter wrote:
I just re-booted to hdd - 9.0 install - to look at settings for sylpheed and play
with xmms. When I tried to get back into 9.1, it halted with :
EXT3-fs error (device
On Tue, 24 Jun 2003 08:55:07 -0400
JoeHill [EMAIL PROTECTED] wrote:
On Tue, 24 Jun 2003 07:20:59 -0500
C. Tresenriter [EMAIL PROTECTED] uttered:
What kinds of problems might I encounter mixing anything with RPMs on
my 9.1 install? I found a compression format for audio yesterday that
I
On Tue, 24 Jun 2003 10:19:32 -0400 (EDT)
[EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
If you don't mind, please send to the lists at linux-mandrake, not
mandrake-linux. I've not taken the time to setup my filters to catch
everything (to anyone reading this with
On Tue, 24 Jun 2003 15:01:20 +0200
Anders Lind [EMAIL PROTECTED] wrote:
On Tue, 24 Jun 2003 08:55:07 -0400
JoeHill [EMAIL PROTECTED] wrote:
On Tue, 24 Jun 2003 07:20:59 -0500
C. Tresenriter [EMAIL PROTECTED] uttered:
What kinds of problems might I encounter mixing anything with RPMs
http://www.jennings.homelinux.net/modules.php?name=Sectionsop=viewarticleartid=10
Juyst what I was looking for Derek
Muchgrass!
c
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Tue, 24 Jun 2003 09:29:10 -0400
JoeHill [EMAIL PROTECTED] wrote:
Most source packages will come with, ahem, detailed instructions
(README or INSTALL). 9 times out of 10 the instructions are:
unpack archive
cd into new dir
./configure
make
this assumes you have all
On Tue, 24 Jun 2003 19:20:30 -0500
Chris [EMAIL PROTECTED] wrote:
Ok, so I did a dumb-ass thing, following easy rpmi's suggestion last night
when I added contrib as a source I reinitialized urpmi's setup, therefore of
course my cd sources are gone. Don't know if I'll really need them
On Tue, 24 Jun 2003 20:29:09 -0400
JoeHill [EMAIL PROTECTED] wrote:
On Tue, 24 Jun 2003 19:27:12 -0500
C. Tresenriter [EMAIL PROTECTED] uttered:
I was just working on that very thing.. I'm reading man urpmi.addmedia
8 - here I believe we'll find the answer!
waitaminnit, yer reading
In an earlier version 0.8.* - that I used in mdk 9.0, I was easily able to set links
in email to open with Opera - In 9.1, with this new version, I can't seem to find how
to set this up, or maybe I just forgot..
Can someone tell me where to make this change?
Want to buy your Pack or Services
As for seeing your playlist :-
To start playing a CD with xmms select PlayDirectory and select /mnt/cdrom
Then you can press the 'PL' button on the xmms GUI to see the playlist.
HTH
derek
--
If I could jump in here
I've been trying to figure this out but I must be doing
On Sat, 21 Jun 2003 23:20:54 -0400
Ronald J. Hall [EMAIL PROTECTED] wrote:
In another thread (I think it was Femme!) posted some Tux gaming pics 'n
stuff. I found a couple I had lying around the old HD, if anyone wants me to
send them offlist. Of course, many of you probably already have
1 - 100 of 103 matches
Mail list logo
