im having trouble unsubscribing from this list ( newbie ) iv tried several
times but nothing works. thanks howard
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, October 05, 2004 11:26 PM
Subject: [newbie] ** Welcome to Newbie **
This is an automated
http://sol.sac.accd.edu/~skolars/satlug/
Bill Hatfield
http://sol.sac.accd.edu/~skolars/satlug/
Bill Hatfield
Bill Hatfield
I loaded 9.2 on my machine last night, dual boot off of a second hard drive. Works fine except the desktop has a "rim" around it. I can adjust the screen to fix that. But I also get kind of a wavy appearance to it. What would cause that?
Thanks, Bill
Bill Hatfieldwww.badhatproductions.com
, William Hatfield wrote: I loaded 9.2 on my machine last night, dual boot off of a second hard drive. Works fine except the desktop has a "rim" around it. I can adjust the screen to fix that. But I also get kind of a wavy appearance to it. What would cause that? Thanks, BillDrivers.D
just from this post..it works with windows and not with Linux..Bioses
can be tied to windows and as part of the MS OEM license that is what
most large computer vendors do to get the rock bottom pricing on
windows. Gateway only supports windows and they do not and will not
support Linux on
23 March 2004 10:03 am, William Warren wrote:
just from this post..it works with windows and not with Linux..Bioses
can be tied to windows and as part of the MS OEM license that is what
most large computer vendors do to get the rock bottom pricing on
windows. Gateway only supports windows
My wife has a Solo 5300 that we bought a year ago refurbed. The first
one got damaged in shipping..but Gateway replaced it withou
problem..since then it has been rock solid..even better than the desktop
i once had.
frankieh wrote:
Marc wrote:
I also had a gateway some time ago, I sold
known issue with the 10.0..boot from 10.0 disc 2 then switch back is the
official workaround
LtCdData wrote:
hi
the cd1 of mdk 10.0 community fails to boot up to the installer on one of my
computers but does on the other ok
however if i put in a 9.2 cd the intaller boots ok from that ok but
will be mozilla 1.x with the calendar
module add-on installed..:)
William Warren
--
My Foundation verse:
Isa 54:17 No weapon that is formed against thee shall prosper; and
every tongue that shall rise against thee in judgment thou shalt
condemn. This is the heritage of the servants of the LORD
FYI i do have sshd running and webmin running so i can do this either
way..:)
William Warren wrote:
I am trying to get webdav working on mandrake 9.2 I have mod dav
installed and the dav fs installed..apache is installed and running. I
have been trying for the past couple of months to get
Any takers on this one?..G
William Warren wrote:
FYI i do have sshd running and webmin running so i can do this either
way..:)
William Warren wrote:
I am trying to get webdav working on mandrake 9.2 I have mod dav
installed and the dav fs installed..apache is installed and running.
I have
Caro Nevermind
il problema è molto semplice in quanto è stato riscontrato anche da me. Ho scritto alla Mandrake facendo notare questo problema, i quali hanno riscontrato un baco nella Mandrake 9.1 che verrà corretto nella versione 9.2 (lo puoi leggere sul loro sito nell'area download ftp). Il
Qualcuno mi sa dire come si chiama il processo che avvia la finestrella di dialogo intitolata "Fine della sessione per """ e che possiede i 2 pulsanti "Termina la sessione" e "Annulla" (questa finestrella viene aperta quando si esce dalla sessione grafica attraverso il menu K, selezione voce
agli amici della mailing list da [EMAIL PROTECTED], giorgio big william ha scritto: A tutti gli amici della mailing list newbie-it, ho cambiato l'indirizzo e-mail, quindi vi prego di indirizzarmi i vostri messaggi di aiuto su questo nuovo indirizzo: [EMAIL PROTECTED] Grazie a tutti voi, ciaoehm..se
A tutti gli amici della mailing list newbie-it, ho cambiato l'indirizzo e-mail, quindi vi prego di indirizzarmi i vostri messaggi di aiuto su questo nuovo indirizzo: [EMAIL PROTECTED]
Grazie a tutti voi, ciao
GiorgioYahoo! Mail: 6MB di spazio gratuito, 30MB per i tuoi allegati, l'antivirus, il
Is there a way to get mgetty to work with distinctive ring? I have been
using winfax with windows 98 installed. I want to change over to Linux
mgetty.
William R. Nash
488 Thornbrooke Drive
Hiram, Ga 30141
770-949-6999 Office
770-949-2424 Fax
www.wrnash.net
attachment: winmail.datWant
but solved it with something in his /BootX.
I thought BootX was for OldWorld machines and I didn't have to worry
about that.
Could someone please help me get this worked out?
Thanks in advance.
-
William Eggington -- http://www.eggington.net
but solved it with something in his /BootX.
I thought BootX was for OldWorld machines and I didn't have to worry
about that.
Could someone please help me get this worked out?
Thanks in advance.
-
William Eggington -- http://www.eggington.net
On Wednesday 21 May 2003 04:28 pm, Stephen Kuhn wrote:
On Thu, 2003-05-22 at 10:57, William Brown wrote:
On Sunday 18 May 2003 06:49 pm, Frans Ketelaars wrote:
On Monday 19 May 2003 00:37, Stephen Kuhn wrote:
And now for something completely different!
http://www.internetwk.com
Where can I get the kernel source and configure it? I need modversions.h to
install my Linmodem. Thanks
William Brown
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
doesn't
like the one in /usr/include/linux so I'm guessing it wants something
different in /usr/src/linux. When I try to install the kernel-source rpm the
installer keeps asking me to install CD2. It gets stuck and no softwarre is
installed. Checksums are correct. Any suggestions?
William Brown
I want to run a Windows program from Linux. Which would be better to use Wine
or VM.
William Brown
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
, still too many people lost in M$ land.
William Brown
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
How To or give
instructions.
William Brown
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
recording till i can record a message.
--
William R. Nash, CCEMT-Paramedic, NREMT-Paramedic
488 Thornbrooke Drive
Hiram, Georiga 30141
(770) 577-2122 (Home)
(678) 910-4505 (Cell)
www.wrnash.net
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
I have a USB wireless optical mouse hooked up to my
Toshiba laptop. Mandrake 9.0 does not allow either the
glidepad or my wireless mouse to work right. All the
mouse is able to do is go up and down on the screen.
Red Hat 8.0 recognizes my mouse fine.
Any suggestions?
Thanks, Jerry. I'll try that.
Bill
--- Jerry Barton [EMAIL PROTECTED] wrote:
On Tue, 14 Jan 2003 07:42:33 -0800 (PST)
William Anderson [EMAIL PROTECTED] wrote:
I have a USB wireless optical mouse hooked up to
my
Toshiba laptop. Mandrake 9.0 does not allow either
the
glidepad or my
I have a Toshiba laptop. Both the glidepad and usb
wireless mouse do not work. Here's what happens: I can
move the cursor with both the glidepad and usb mouse,
but it only goes up and down. This problem doesn't
occur in Red Hat 8.0, but does in other distros I've
tried (Knoppix--but there, the
On Saturday 04 January 2003 23:17, william stinson wrote:
Hi
I some how appear to have mucked up the CUPS printing facility on my box
(probably due to some configuration error I must have made recently). It
was working fine before. The symptom appears to be that the daemon cannot
bind
be going wrong (or suggestion on how to narrow down the
problem further)?
More information available on request
William Stinson
[root@localpc billy]# /etc/rc.d/init.d/cups start
Starting CUPS printing system: [ OK ]
[root@localpc billy]# /etc/rc.d/init.d/cups
is there a way i can install 9.0 on this machine I do not want to
reinstall 7.2 again. Thanks Bill Nash
for chat [EMAIL PROTECTED]
--
William R. Nash [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
yes that was the first thing i did. I'm now trying to find information
by look at the bugzilla reports. still nothin
Bill nash
On Sat, 2002-11-30 at 15:04, Stephen Kuhn wrote:
On Sun, 2002-12-01 at 06:40, William R. Nash wrote:
Hello,
I'm trying to reinstall linux on a compaq proliant
Can anyone help me out with setting up an ident server
on Mandrake 9.0? I found a HOWTO on it, except that
it says to configure /etc/inetd.conf which I do not
have ( got xinetd )
-William
__
Do you Yahoo!?
Faith Hill - Exclusive Performances
.
Bill.
--
William Bradley
http://www.leaflets.on.ca
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
of this so
that when the machine boots the eth0 interfacace will also be don.
Can someone tell me what file and what form the command will take.
ifconfig eth0 192.168.0.1 netmask 255.255.0.0 broadcast 192.168.255.255
--
William Bradley
http://www.leaflets.on.ca
Want to buy your Pack or Services
-mdk/kernel/drivers/block/paride/paride.o.gz
unresolved symbol parport_put_port_R4ed54fe2 type
error messages. Anyone know what's up with that?
Thanks in advance.
-William
__
Do you Yahoo!?
New DSL Internet Access from SBC Yahoo!
http
.
-William
__
Do you Yahoo!?
New DSL Internet Access from SBC Yahoo!
http://sbc.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Does any one have information on how to do offsite backup. I would like
to backup windows and linux machines. I have a large SQL and exchange
data base i would like to store off site. any infomation. Thanks Bill
Nash
Want to buy your Pack or Services from MandrakeSoft?
Go to
On Mon, 2002-09-09 at 21:40, William R. Nash wrote:
Does any one have information on how to do offsite backup. I would
like to backup windows and linux machines. I have a large SQL and
exchange data base i would like to store off site. any infomation.
Thanks Bill Nash
Take the tape home
Hello,
I'm trying to learn to how to do name-based Virtual
Host Support.
With apache HTTP server Version 1.3.22
I went to the /etc/httpd/conf/vhosts
directory
I edit the Vhosts.conf file and added the following
lines
NameVirtualHost *
VirtualHost *
ServerName www.paulding-linux.com
Hi
I have an Alpha server that I am having to run RedHat on.
But I prefer Mandrake and there was talk of there being a port developed for
these machines.
Anybody on here know whether its likely to ever happen or whether its been
canned or what?
J
--
Sent using Kmail. Virus free because
There are some things on the market to help with IPTables:
Mason:
http://dhp.com/~whisper/mason/
or
Fbuilder Plus
http://www.icewalkers.com/softlib/app/app_01535.html
Anybody ever used these and know if they are any good?
J
On Friday 26 Jul 2002 10:11 pm, you wrote:
Hello all,
I currently
Hello,
I was wondering if there was a way to make a
t1 line multilink to increase it bandwidth. I have some information on
this but still do not know how to do it. Thanks For any help.
Bill Nash
Thanks for you help setting it up was not that hard. i was just overlooking
1 routing table. Thanks for your help.
Bill Nash
Message__ BestRegards,
William R. Nash. Consultant Century Solutions Group, INC. Tel: 770-420-5546
Cell: 678-910-4505 Fax
Hi
Can anybody suggest a URl where I can go and get drivers for this sound
card so it will work with LM 8.2?
J
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello,
I would like to set up a VPN so I can connect
to my computer from work. This is what I have . I have a laptop with
windows XP that I take to work. I need to be able to connect Via VPN so I
can get some files from my Linux mandrake 8.0 server at home. I do not how
to set up a VPN to
msg94096/bin0.bin
Description: filename="text1.sdw"
Hello,
Why AbiWord and X Downloader weren't included in Mandrake 8.2???
those apps were present in Mandrake 8.1!
Regards,
William.
_
Do You Yahoo!?
Get your free yahoo.com address at http://mail.yahoo.com
Want to buy your Pack
append="mem=exactmap mem=0x9000@0 mem=0x1b80"
re-rean lilo
reboot
now the computer see 450 meg of memory.
working on the rest.
I found this out by reading http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=36940
play with the numbers some.
Bill Nash
William R. Nashwww.wrnash.net
Hello,
I was playing with PHPnuke 5.5 today. I like
the way it works but some of my friends told me to use postnuke that it was
better then PHPnuke. I was wondering which is better phpnuke 5.5 or
Postnuke 7.1.
Bill Nash
Hello Everyone,
I have been talking with several people
about starting up a Linux user group in Hiram, GA. This is my plan so
far.
1. Teach people to use Linux.
2. Build computers with Linux installed and
set them up for local schools so they will have computers and internet server
for
Subject: Re: [newbie] Compaq Proliant 2500
On Sun, 3 Mar 2002 22:55:21 -0500
William R.Nash [EMAIL PROTECTED] wrote:
Hello,
I have a problem with installing Linux on a Compaq Prolian t2500
server
with 458M of memory. What my problem is Linux only see 16M of memory.
I
have tried to use
Hello,
I have a problem with installing Linux on a Compaq Prolian t2500 server
with 458M of memory. What my problem is Linux only see 16M of memory. I
have tried to use linux-mem458M i get a error. I tried to use linux mem=128M
it will install but runs slow. took 2 hours to start KDE.
Hello,
Try look at the following links: i copy them from the Linux-mandrake 8.1
book.
Original Copyright
http://www.april.org/
http://www.gnu.org/copyleft/gpl.html
hope this help you. good question.
Bill Nash
- Original Message -
From: Nelson Bartley [EMAIL PROTECTED]
To: Newbie
Hello,
I would like to install linux on my hp
jornada 548. Is there any way i can do this?Is there a program that
will let my jornada sync with a linux program?I would like to use
evolution, but they just support palm.
Bill Nash
Hello, I can across this has any one tried
this? if so does it work.
IntroductionThis will tell you
how to set up a masqueraded PPP connection via. IrDA from a Windows CE PC
Companion to a Linux based notebook computer. Once you are IP connected, the
rest is up to you. We put this
I do not have a laptop to test it.
Bill Nash
- Original Message -
From: Rick [Kitty5] [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, February 04, 2002 8:34 PM
Subject: Re: [newbie] Windows CE and Linux
why not try it and find out?
Rick
Kitty5 WebDesign - http://Kitty5.com
Is there a program out there that will allow a
windows ce machine to sync with a Linux calendar like jpilot for the palm
pilot. I would like to put Linux on my jornada 548 put all the program I
have read so far are in beta. thanks Bill Nash
Try looking in /etc/lilo.conf
Hope this work
Bill Nash.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of s
Sent: Monday, December 31, 2001 2:36 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Welcome Picture
On Sunday 30 December 2001 08:36 pm, you
Palm os can be use with linux. I have a palm V and a hp joranda 450. So
far i can't find anything that will work with linux on the hp.
Bill Nash.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Valerie Cheng
Sent: Sunday, November 18, 2001 10:01 PM
Hello,
What program is the best to design web pages without knowing now to
program. I have been using frontpage 2000. I'm trying to get away from
windows and just use linux. next i need to change over my hp joranda 450 to
use under linux and quicken then i can delete windows.
thanks Bill
Sorry to bother everyone. I have a couple of
questions.
1. Is there a way i can use JAVA with
kongueror with mandrake 8.1. I believe i install java on the
computer.
2. How can i set up the network section under
kongueror. I have 3 linux machine running on 200 mhz computer and 1 500
mhz
I heard that there is a way to get the wheel working by adding
ZAxisMapping 4 5
to XF86Config. However, I am still without success. I have also tried
imwheel to no avail. An observation I made is that without extra
configuration, Red Hat 7.1 was able to detect my mouse and the wheel works
in
I have got LM8.0 and Logitech Mouse Wheel Optical. Everything is working
great but the wheel isn't working. How do I get it to work? Browsing without
the wheel is really troublesome.
_
Get your FREE download of MSN Explorer at
Certs, School, it's all great. And if you do not have any other way in that's
where you have to start. But I interview people every month that have all
the certs and school and no real pactical knowledge to go with it. If you can
get your foot in the door and you have experience, that's worth
I currently am running LM8 with a PS2 mouse. Everything works fine this way.
I have a Logitech optical wheel mouse I use when I'm in my Other OS. Has
anyone had any luck with getting this logitech to work. Thanks
Will
Hello
Has anyone use the following software together on a linux mandrake 8.0
machine. if you is there any problems i need to know. cold fusion 4.5 or
better and oracle 8i standard.
Thanks Bill Nash.
This must be one of the funniest things i read all year. Thanks for the
laugh.
Bill Nash
On Friday 11 May 2001 07:59, Mcintosh, Duncan wrote:
Hi there all
I think this must be the hoax of the year.
Microsoft has come out with its own Linux version. I have to see this to
believe it though.
RAS
a windows program for remote access.
how are you trying to compile the kernal. are you trying to upgrade to 8.0.
I would need more information to be able to help you.
thanks Bill Nash
On Monday 07 May 2001 15:52, Randy Kramer wrote:
Michael,
Where are you starting from -- do you
a floppy to start the installation, where do I do that?
Can I use one from the Mandrake 7.1 installation?
I need a few suggestions. Thanks in advance.
William
Thanks to everyone for pointing out how to burn a CD from an .iso file.
For Easy CD Creator 4, go to the file menu, choose Create CD from CD
image, browse to where the .iso (or .cif - what's that?) file is, select
and open, and then it will give you the CD Create Setup window. Put in
the blank
try using Webmin.
also do you have more than 1 ip address for each web site.
Thanks Bill Nash
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, April 09, 2001 1:54 PM
Subject: [newbie] Apache/virtual hosts
Does anyone have any real (working)
I need some help.
At work i've have been using linux 7.2
without any problems. I have a old alpha computer 800 5/333 that has not
been use for approx a year.I have downloaded a copy of linux for
alpa server. Burnit to a cd. then tryed to install that
software. I neverplay with a alpha
07:28, you wrote:
I have another question... as always.
I d/l'ed LinNeighborhood last night and installed the rpm. I was wondering
if anyone has ever configured it before? I can't even find where it is
installed to. I need your help!
Moose
--
William R. Nash
Director of Information System
once I get to the open menu running how do I open a package from the cd rom?
At 08:10 AM 02/02/2001, you wrote:
At 19:54 02.02.2001 +1030, you wrote:
Hi to the group.
I am very new to Linux and would welcome some help. I have
installed Mandrake 7.2 and think it's the best I've
On Tue, 02 Jan 2001 14:20:50 +0100, you wrote:
- Enter the "lsmod" command and look whether
there is a "printer" entry. If not, add a line
"PRINTER=yes" to /etc/sysconfig/usb and enter
the commands
service usb restart
chkconfig --add usb
All the above applied and/or done
I am very new to Linux having installed Mandrake 7.2 about 3 weeks ago
and two or three times since.
A problem I am having and completely fail to understand is that my HP
930 C printer was auto detected and installed on a automagic
recommended installation and printed a test page but just sits
Umm look at the date ... whos box is fubared?
On Friday 04 January 1980 03:17, you wrote:
Charles, thanks for the advice.
I will configure my Linux ISP settings as you described below and let you
know.
Minhaz
- Original Message -
From: oNb [EMAIL PROTECTED]
To: [EMAIL
;save configuration" button
in DrakConf that I'd never checked!
Not implying that you're quite as clueless as I was, but it might be
worth checking.
John Hendrickx
- Original Message -
From: "William Presho" [EMAIL PROTECTED]
Hello All
wo lines. Or,
simply add a line to /etc/hosts similar to the following, but use your
"real" IP address:
192.168.0.1 mypcname.myispdomain.com localhost.localdomain
--Greg
- Original Message -
From: "William Presho" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sat
Modem Working
it comes up when you close the window, there's a couple of options, save
changes, view changes, don't quit
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of William Presho
Sent: 22 October 2000 10:31
To: [EMAIL PROTECTED]
Subject: RE: [newbie
configuration will work for that session, but not after a reboot. I'm
using Linux-Mandrake 7.0, so things could be different on your
system.
Good luck,
John Hendrickx
--- William Presho [EMAIL PROTECTED] wrote:
Not exactly sure where the save configuration button is could you
give me a
hint.
B
this to the Defaults
I have found when I "over-configure" the out-bound NIC, things don't work
properly. This could be the case with your configuration...it's worth a
shot.
--Greg
- Original Message -
From: "Anthony F. Littrel Sr." [EMAIL PROTECTED]
William Presho wrote:
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Unable to get Cable Modem Working
Hmmm...
Are you *really* supposed to be using a static IP address?
--Greg
- Original Message -
From: "William Presho" [EMAIL PROTECTED]
Hi Greg
Well I set up like you said but still no l
Hello All
I know this has probably been discussed here before, but I can't find
anything that helps me.
I have @home with an SMC1211TX Ethernet Card. I have used the help files and
set it up accordingly, using drake config. It tells me that everything is
okay but will not connect. Also I have an
12:26 PM
To: [EMAIL PROTECTED]
Subject: RE: [newbie] Unable to get Cable Modem Working
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of William Presho
Sent: Friday, October 20, 2000 7:47 PM
To: [EMAIL PROTECTED]
Subject: [newbie] Unable to get Cable Modem
or dhcpcd. Whether you are
activating your NIC at boot, etc.
--Greg
- Original Message -----
From: "William Presho" [EMAIL PROTECTED]
Hello All
I know this has probably been discussed here before, but I can't find
anything that helps me.
I have @home with an SMC1211TX Ethern
There are pleanty of winmodems that now have drivers for linux. search
google for
winmodems in linux
stephen wrote:
you have a winmodem no good i'm sorry for linux
and you will need to fdisk /mbr for linux to reinstall other windows
opersting system ok
stephen
- Original
used. (VA Linux comes to mind)
Every thing worked great on the first try.
--
William Presho
Registered Linux User #119170
"Windows FREE in 2000!"
how do I get off this list?
Hello all. I just installed mandrake 7.1 on a pIII 733 with 128 MB ram.
All went well, and I was able to start using the box right away, with one
notable exception. I cannot get KPPP to connect to my isp at all. I use an
external USR sportster 56K on com1. The setup for the account seems
i work for an oem vendor here in milwaukee wisconsin, and we deal in oem usr
modems. they have a area of thier site for the oem only modems at:
http://consumer.3com.com/oem/filelibrary/index.html
check the black plastic surrounding the phone jacks for a white sticker with
a barcode and a
directory (folder
icon) on your desktop. That's it! Imwheel will start
whenever your GUI starts.
This works! Mice were meant to scroll
BTW -- This fix also works for MS IntelliMice with a serial connection to
the computer.
- William Arndt http://members.home.net/arndtw/
Is there any way to get the Linux Mandrake Newbie listserver messages to
show up in a digest instead of one at a time?
- William Arndt http://members.home.net/arndtw/
e Mandrake newbie sysadmin that
describe which programs you should disable and which ones you need to keep
going?
- William Arndt http://members.home.net/arndtw/
yes, I have lnx4win too. that is the exact same problem I had with the
kernel panic.
enter linux through Safe Command Prompt Only, by changing directories
and manually booting it; this is how...
c:\WINDOWScd\lnx4win
c:\lnx4winlinux.bat
so, you mainly just type, linux.bat after you change
Just wondering how I would manually enable HD optimisations after
installing and specifying during the install that they should be turned
off.
I was trying to figure out a problem I was having (turned out to be
automount) and thought reinstalling with optimisations might do the
trick. How can
her hdparm options covering such things as buffer size,
block size etc. which I have to admit I don't really understand.
Chris
- Original Message -
From: "Wise, William M." [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, August 28, 2000 2:18 PM
Subject: [newbie] How t
Mine does something similar on my Inspiron 3700. When I close the cover
and then open it again I get a weird plasma-like psychadelic display and
the machine is fully locked up. I haven't upgraded the machine to 4.01
which may cure that hiccup. Has anyone else seen this problem?
Thanks,
Will
1 - 100 of 170 matches
Mail list logo