Does anyone know how I can configure ML to use my MSN Broadband service? Is
there a way to load the MSN Explorer stuff? I don't even know how to install
anything on ML. I need this info in stupid newbie terms. I am using ML 9.0
RC2, on a Toshiba Satellite 1605CDS, with a LinkSys PCMLM56
Thanks. I knew someone here would have a suggestion.
LPH
On Mon, 2001-12-24 at 14:50, Tom Brinkman wrote:
On Monday 24 December 2001 02:15 pm, LPH wrote:
When KDE 3 starts up there is a really nice set of images. Where
are these images located? I was looking in /opt/kde3 ... but
Forwarded message:
Hello,
My daughters have been working with MandrakeLinux 8.1 and helped write
this review.
http://www.killertux.com/modules.php?op=modloadname=Reviewfile=indexreg=showcontentid=14
Please take a look at it and make some comments. This list has always
helped them
Ed,
That should be the correct link.
Since you've been so kind to reply, go to http://www.killertux.com
directly - click on the link - because it looks right to me. And I was
able to follow the link in the reply email from newbie.
Curious. Any else see where I've made a mistake on the link?
OK,
I'm not sure what I've typed wrong. Therefore, let's try this ...
simply go to http://www.killertux.com and then follow the link to the
review that is at the top ... maybe that will work. Not sure why the
link I sent is wrong.
Must be my fingerz !
Forwarded message:
On Sunday 23
On Sun, 2001-12-23 at 15:32, s wrote:
Is this the gaming edition review? Well, nice review up to a point... the
point at which you forgot to comment on wineX and the gaming part. I've
heard that the simms plays flawlessly, but the wineX the comes with mdk
doesn't cooperate with other
Thank you for the compliments. Elizabeth and Sarah are giving
themselves high fives after reading your email.
They'll do the expert installs after playing with KDE 3.0beta1. The
last file downloaded a little while ago and they wanted to start playing
with it.
Happy Holidays.
Layne
On Sun,
--
_
Nucleo Gestione Sistemi Informatici
MDK GNU/Linux 2.4.x P III 500 256
U.T. 04/2001U.219750 M.104035
-- gradirei essere cancellato dalla ml
_
Nucleo Gestione Sistemi Informatici
MDK GNU/Linux 2.4.x P III 500 256
U.T. 04/2001U.219750 M.104035
-- gradirei essere cancellato dalla ml
_
Nucleo Gestione Sistemi Informatici
MDK GNU/Linux 2.4.x P III 500 256
U.T. 04/2001U.219750 M.104035
Hello !!
I have 2 very newbie questions:
1- I had a disk with WinME and Win2000Server in dual boot. I then installed
Mandrake-Linux 8.0 in a free partition, with all success. It modified my
boot with this screen that lets me choose the O.S. tu use. Ok, now I plan to
remove my Mandrake-Linux
Hello!
I've just installed Mandrake-Linux 8.0 and found
this great list, with you message on it.
Well... I have a PC with a cable modem, connected
via USB port. It is a 3Com Cablemodem.
The point is... I do not reach any internet access
with it.. I think it's not even detected. But when
Il mer, 13 giu 2001, [EMAIL PROTECTED] ha scritto:
Ciao a tutti,
Finalmente ho installato Mandrake 8!
Guardando qua e la per vederne le novità mi è sorta una domanda:
Esiste un programma per sfogliare la rete (Lan) che mi permetta di vedere server e
client Windows?
Mi interesserebbe
Il lun, 11 giu 2001, Fabio Coatti ha scritto:
Occhio, le barre vanno dritte (//), non backslash (\\) (troppa
compito per casa : devo riempire di slash una pagina di quadernino :-))
microsoft ? :-))) )
microCHE??
producono forse elettrodomestici miniaturizzati?
se è così dove li
Il lun, 11 giu 2001, max ha scritto:
Qualcuno sa come si può far partire il programma webmin appena installato
?(non lo vedo da nessuna parte ! ) esiste nella cartella ma...
Grazie a tutti !
Un'aggiunta a quanto detto con la mai precedente;
usare webmin è comodissimo in una LAN, ma MAI
Il mer, 06 giu 2001, [EMAIL PROTECTED] ha scritto:
Sono in procinto di acquistare una nuova stampante, qualcuno di voi mi può segnalare
qualche stampante che funzioni bene con linux?
Grazie e ciao a tutti
Se vuoi una laser puoi andare tranquillo con la quasi totalità dei modelli, se poi usi
Uso solitamente Mandrake 7.1 ed ho voluto installare su un'altra
partizione la Mandrake 7.2 per fare qualche test.
La scelta dell'una o dell'altra distribuzione la faccio con un
bootloader esterno.
La cosa per me abbastanza strana e' che, pur essendo l'hardware
identico (trattandosi di due
Hi:
I was wondering if my LinkSys cable router will DHCP an ip to my Linux b0x.
I have a working nic card, and my other machine[98] connects with no
problems.
If I set my netconfig to DHCP, and netdevice eth0 and irq: 5 , would that
accept the dhcp.
I love linux, but hate to config it ;)
Steve:
Did you ever get an answer
I have the same prob.
Thnx
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Steve Dressler
Sent: Monday, September 25, 2000 8:39 AM
To: [EMAIL PROTECTED]
Subject: [newbie] DSL
I have 2 win98 machines, and
Actually, the lockout on debates is why I sent this message to Ralph Nader.
snip
=
I am a registered Republican. I'm also a former business owner and work for
a company that Ralph Nader generally targets as being 'anti-consumer' ...
With that understanding, I made my decision for
Try your DRAKCONFIG
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of dan farley
Sent: Thursday, September 28, 2000 1:01 AM
To: [EMAIL PROTECTED]
Subject: [newbie] Configuring LAN connection
hi. i log onto a LAN at syracuse university. how do i
Hello:
How do i get out of grub login?
Its like a dos prompt/login.
I want the GUI Login.
Thanks Guyzz
FLUIDNYC
Hello/morning
I just formatted my C: drive.
Im looking to do clean install [mandrake 7.1]
Do i need a boot disk to install it?
Where can i find a boot disk or how can i make one from the DOS prompt.
Remember my c: drive is now formatted.
Im at the GRUB command line. Im needing some
Hello Newbies:::
OK well as i found out, I made a boot disk for mandrake 7.1
I attached it to this email. (patch.pl) got it from linux-mandrake.com--
Its a perl script.
ENJOY!
PS: not to spam or anything, I made a newbie website for us linux users.
It will be fully functional by the end
Typo ...
linuxnewbie.org rather than linuxnewgie :-)
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED]
Sent: Saturday, September 23, 2000 6:41 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Iomega
no such address denis???
In a
the joke site resides at http://www.mslinux.org
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Eugene C.
Zesch
Sent: Tuesday, September 12, 2000 11:10 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: [newbie] MS Linux
could'nt get the
Would you contact me directly please with the list of video cards,
manufacturers, models, etc. The e-mail address is [EMAIL PROTECTED]
I have a few more questions and would like to do a follow up.
Thank you.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf
Correct, PCI slots are usually white and the components mounted on the PCI
board face away from the CPU. ISA slots are usually black and the
components on the ISA PCB board are mounted facing the direction of the CPU.
AGP is brown and usually closest to the CPU (not to be confused with the
brown
Excuse for asking ... but why are you suggesting PCI?
It seems that if the board supports AGP 4x or even 2x then you can certainly
use the Nvidia based chipset video cards under Mandrake 7.1. Since I'm
jumping in the middle - maybe there was part of the thread that I missed
like the type of
NO, that is incorrect. That statement is a myth promoted through ignorance.
I've seen enough destroyed product from overclockers - that I can stand
straight and tall and tell you bluntly - overclocking DESTROYS parts.
Period.
"If you buy it - then it is yours" - is a defense statement that I
You may dl Gentus from their website, www.gentus.com
ABIT also has a comparison chart for the differences between 1.0, 2.0, and
3.0
/LT
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Doug McGarrett
Sent: Monday, September 04, 2000 3:05 PM
To: [EMAIL
A couple of things.
First, RH 6.2 installation will proceed on a Tbird or Duron but you will
receive a Kernel panic on reboot.
POSSIBLE SOLUTION
This issue appears to be related to a Processor Serial Number function
supported by Redhat that the Duron does not. There are two possible
What motherboard?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Bill Fry
Sent: Monday, August 21, 2000 10:24 AM
To: [EMAIL PROTECTED]
Subject: [newbie] Anyone tried [successfully] to get email support?
I've been trying to get help on a Mandrake 7.1
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Mike Tracy Holt
Sent: Thursday, August 17, 2000 6:10 PM
To: [EMAIL PROTECTED]
Subject: Re: Re[2]: [newbie] OT Linux gaming OT
But - seriously - with the right parts Linux is very easy to install.
I don't mean to be argumentative .. but I disagree with one of your ideas.
The Crown for fastest installation of an OS belongs to Linux.
Linux-Mandrake has got to be THE easiest installation when the correct
hardware is matched with the OS. A fully usable office desktop is complete
after very
QIII fps is better for nVidia products. Tom's hardware just did a nice
write up on comparing the nVidia based chipsets .. Sadly he didn't go into
great detail on how he reached his high fps scores. Maximum Linux also did
a write up in their latest magazine issue. They also didn't discuss
Sorry to break into this thread. It caught my attention.
A friend of mine told me a story about the birth of Win95.
A few guys who worked for a company were bought by "MickeySoft" ... one of
the guys for this purchased company thought it would be interesting to move
DOS to 32 bit. As the
1960's - Used crayons to color in punch cards while waiting in the computer
room.
1976 - In high school we did some time sharing.
1979 - The college I attended thought they should start teaching this PC
stuff.
1983 - Finally owned my own PC
1988 - Thought I knew enough to own my own
Linux Community,
I was thinking of adding a section to my website devoted
to
the problems of the Linux community and Linux development.
I would appreciate comments/feedback about the idea.
[EMAIL PROTECTED]
www.sitesuwant.com
No comment, some people are quicker than others though. If you realized,
the E-mail subscription is CGI based and you get every message sent to the
E-mail address. You get all the problems from the Linux community and
answers to the problems you have. That's the beauty of this. Don't ruin it
Hello Linux community,
I have a problem with my Best Data 56k
External Linux Modem connecting to the internet. It connects but the KPPP
only lets me stay on for 1-10 minutes before kicking me off. This is the
message I get back-
"The remote system does not seem to answer to configuration
Try out IglooFTP
or perhaps gftp .. I prefer IglooFTP cause of the cool icons... You
probably have that installed already.. type IglooFTP from a console to find
out.
Aaron Sinclair
Webmaster, Regional Communications
Mercy Ships-Pacific
http://www.mercyships-pacific.org.nz
From: "
If you installed the Xserver then type startx at the command prompt.
Aaron newbie2
From: Chris [EMAIL PROTECTED]
i dont understand what the opperating screen is supposed to look like
when im done installing, but all i get is a command promt. i cant get
gnome or kde or anything to come up.
Yeah, so I avoided doing a fresh install because I need to take my laptop
apart to remove the mouse everytime I install... You need to install a C
compiler... either install pgcc , pgcc - c++, pgcc-obj and dependencies from
your CD, of ftp
Here is the url were to get it:
Opps.. dang computers, make me look like a fool.. lols. alright so i got the
wrong package Downloaded gcc-r.95.2-4.i586.rpm and installed with all
dependencies... No worries... tried configuring mysql again, this time it
tells me:
checking for gcc... gcc
checking whether the C compiler (gcc
from Xserver you can use Ctrl F1-F4 for switching your desktop.. to get to
another console press Ctrl Alt F6, then Alt F1 (which is the console that
Xserver is running on) all the way up to Alt F7, five more consoles to log
in with..
Aaron newbie2
I'm pretty sure what you're talking about is
gnomeicu ... rpm inculede on your disk.
aaron newbie2
I have Mandrake 6.1, is there any icq clones on the 6.1 cd??
The RPM (redhat package manager) has a package, gnomeicu that is an icq
clone.. easy to install and set up.. ICQ me if you like . my icq no. is
46118629 -- PS Remove HTML Formatting from your list emails.
Aaron Sinclair
Is there like a realy EZ way to install programs in linux ?
i realy
Well here goes... thanks to all of you that hang out and help on these
lists.. I should think that this would be a common problem for anyone
wanting to install stuff on their system...
I am attempting to install mysql onto my system
I run the ./configure script, but get the error..
checking for
Mandrake's not asking me about Fdisk or Disk Druid, if that's what you're
asking. and no, I haven't gotten to the part where it asks where to install
to.
James Potts
([EMAIL PROTECTED])
-Original Message-
From: John Aldrich [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 24, 2000
I solved the problem by using a rescue disk to load a minimal linux on my
system, using fdisk to create my partitions, then restarting the install.
James Potts
([EMAIL PROTECTED])
-Original Message-
From: James Potts, Webmaster [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 24, 2000 2
I did not find a way of disableing the mouse autoprobe during install.. One
option that i came across was to copy the cd to hard drive and replace the
mouseconfig 3.9 with the redhat mouseconfig file,(which apparantly didn't
freeze). It seemed a long way around for me, so i pulled my laptop
try at the boot. linux expert or expert noprobe . didn't work for
me, but worth a try none the less.
When trying to install my machine freezes after the probing of the
mouse.
It says that is has found a PS/2 compatible mouse and then the keyboard
freezes completely. Any advice or
I don't have a cc installed on my sys, and for the life of me cannot find
one. Is there a list that describes that packages on the mandrake cd so that
i can identify which one to install, or do i have to go through them one at
a time... Still I have not much of an idea of what i am doing, but
I have finally installed 6.0 onto my laptop. Killed the mouse by pulling the
computer to tiny little bits, and then putting it back together agian, and
like all good mechanics was left with a few too many screws and wires at the
end of it.. I presumed this to be the mouse.. So it installed fine,
error is:
checking command line arguments
expert mode enabled, unknown option 'noprobe'!
enter 'expert noprobe' at the boot prompt should skip the mouse autoprobe.
The problem arises during install, after the packages have been
copied from the CD, Mouseconfig 3.9 attempts to
?
--
From: David P.Greenberg [EMAIL PROTECTED]
To: [EMAIL PROTECTED], "Regional Webmaster" [EMAIL PROTECTED],
[EMAIL PROTECTED]
Subject: Re: [newbie] The slow and painfull process averted
Date: Fri, 24 Sep 1999 12:34 PM
On Thu, 23 Sep 1999, Regional Webmaster wrote:
Yes I think I might
I tried running the BeroFTPD on my system and never did get it working
properly. The only difference is that I was trying to log in as a user. I
could log in anonymously with no problems. Have you run the BeroFTPD config
yet ? This allows you to configure your anon accounts, directorys, and
you can find out all the files with 'rpm -ql BeroFTPD' or in one of the
gui rpm tools, it's helpful for tracking down manpages.
I ran this, and everything looks fine. For whatever reason when I bring up
the manpage for ftpaccess all I get is heiroglyphics on the screen. Is there
some other
Rabun County, Georgia
Where Spring Spends the Summer
Business Office Phone: 706-782-9239
24 Hour Tech Support and Signup Phone 1-800-856-4053
~~
- Original Message -
From: Webmaster [EMAIL PROTECTED]
To: [EMAIL
I have a Linux Mandrake 6.0 box up and running, and I am experimenting with
switching over some or all of my NT servers over to Linux.
I am having a problem, however, with gaining access to the box VIA FTP. I
have set up the user accounts (using linuxconf) with FTP being a
supplimentary group,
61 matches
Mail list logo
