@googlegroups.com] On Behalf
Of TheOreoMonster
Sent: Sunday, June 29, 2014 8:49 AM
To: ptaccess@googlegroups.com
Subject: Re: Recommend your favorite waves plugins.
anyone tried waves center? Know if its accessible?
On Jun 26, 2014, at 6:49 PM, Poppa Bear heavens4r...@gmail.com wrote:
I have been using
it and its a tool i didn't have
in my arsenal yet as opposed to yet another compressor or EQ.
On Jun 29, 2014, at 5:43 PM, Poppa Bear heavens4r...@gmail.com wrote:
I have it and yes it is accessible. I have used it half a dozen times over
the last year, I have found that it is very easy to over use
I have been using waves for quite a few years now and after aqumulating
dozens of them, I can give you a short list of the waves I would feel
complete with anywhere. As for reasons, if you have a particular question I
can give you my opinion or two. I use the API 2500 compressor on almost
Hello, this is Poppa, You would follow the directions that I laid out for
John yesterday to do this. If Slau doesn't see that as being the typical way
I think that him or others will chime in.
HTH
-Original Message-
From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On
Hello Slau, would the particular steps to set this up for him be what I
wrote yesterday on this thread? I only say that so he doesn't have to ask
for the steps if what I put was sufficient. Also, thanks for sharing that
command to send all selected tracks to the same send/bus.
-Original
was out of town and didn't
follow the thread.
Slau
On May 26, 2014, at 4:46 PM, Poppa Bear heavens4r...@gmail.com wrote:
Hello Slau, would the particular steps to set this up for him be what
I wrote yesterday on this thread? I only say that so he doesn't have
to ask for the steps if what I put
Papa,
I apologize. I didn't really follow this thread as it wasn't rellavant to
me at first. Therefore, I didn't see your steps. I am so sorry.
Now I really! feel imbarrassed!
Chris.
- Original Message -
From: Poppa Bear heavens4r...@gmail.com
To: ptaccess@googlegroups.com
Sent
Hello John, when you create this new track for reverb, it needs to be
created as an AAX stereo track. Once that track is created as track two, you
need to interact with it, and change the input to say, bus 1/2 or 3/4. Now
you want to go to the track where you have the instrument on and interact
to noise ratio mileage will definitely vary! :)
Chuck
On May 9, 2014, at 2:34 PM, Poppa Bear wrote:
Thanks for sharing this Chuck, I am a bit on the fence about this still. I
do understand that many plugs such as the waves are calibrated for about
minus 18 DB or so, but at the same
Intristing
-Original Message-
From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf Of
Mike Lockett
Sent: Friday, May 09, 2014 9:20 AM
To: ptaccess
Subject: SubPhattyBRL Hey guys give this a look!!!
Moog Sub Phatty Analog Synthesizer with Braille Overlay
25-key
.
Sometimes at -0.5 dBFS.
Check out Tom's latest designs here;
http://GraefeDesigns.com/
HTH
Chuck
CHUCK REICHEL
soundpicturerecord...@gmail.com
www.SoundPictureRecording.com
954-742-0019
GUFFAWING :)
In GOD I Trust
On May 8, 2014, at 11:11 AM, Poppa Bear wrote:
I
I missed the talk, but in genral I record vocals and instruments at about minus
9 to minus 12DB. I do still get projects to mix from clients where vocals are
pushed to 0DB and the instrument track is often clipping so your not alone in
your experience.
- Original Message -
From:
as printout in
the previous post.
On May 6, 2014, at 1:44 AM, Poppa Bear heavens4r...@gmail.com
wrote:
I believe that the BC is only a Midi controler and does not put out
any audio, have mic/die inputs, head phone outs or anything like
that. The 003 is a full control surface with mic and line inputs
for a Digi00 anything now, either; I just saw the deal come up, so thought
I'd ask. I want something newer. Maybe someone else here will take you up
on that, though :)
On 08/05/2014 16:12, Poppa Bear wrote:
I have a Digi 002 I will sell for $200, the optical plugin housing went
south, but other than
From what I understand, PT 11 takes up a smaller CPU foot print than any of
the other versions of PT.
- Original Message -
From: Cliff Isaksen
To: ptaccess@googlegroups.com
Sent: Sunday, May 04, 2014 10:29 AM
Subject: Re: Digi 003 questions
Hi! This is nothing less than
messages would indeed be helpful. The offer of help is much
appreciated also:)
Cheers,
Ashley
On 02/05/2014 03:27, Poppa Bear wrote:
Ash, don't forget that some on the list like myself will help with Skype,
Chuck is another good helper on the list for phone or Skype help. Slau is the
man
I believe that the BC is only a Midi controler and does not put out any
audio, have mic/die inputs, head phone outs or anything like that. The 003
is a full control surface with mic and line inputs, outputs, optical outs,
SPDIF, two head phone outs, preamps, DA/AD converters and can be used as
Chris, if you get a chance, grab a wireless keyboard with a numb pad IMO. I
like pressing 3 on the num pad for recording quick punch because it is a one
button step and in my experience I have got punches in at a fraction of a
second. It sounds like you will save a whole lot of time considering
Chris, for quick punchins like this, I just make sure that under the options
that quick punch is checked and then play the section you want and when you get
to the area you want to start recording at, press 3 on the num pad and your on
live and then stop as soon as your done. That is my way
Ramy, Slau gave you perfect instructions, make note of them and follow them to
the T.
- Original Message -
From: Slau Halatyn
To: ptaccess@googlegroups.com
Sent: Thursday, May 01, 2014 1:41 PM
Subject: Re: Editing questions
Hi Ramy,
Track selection:
Make sure you
Ash, don't forget that some on the list like myself will help with Skype, Chuck
is another good helper on the list for phone or Skype help. Slau is the man
when it comes to the list, but I am not sure if he does any skype help off
list. If you want I can forward you a bunch of messages I have
Yes, it has a scrub wheel.
- Original Message -
From: Jed Barton jedbar...@gmail.com
To: ptaccess@googlegroups.com
Sent: Thursday, April 24, 2014 8:12 AM
Subject: Re: Digi 003 questions
Hey guys,
Is this digi003 a good control surface to use? Does it ahve an audio
scrub wheel?
On
it this is a digidesign product. I'm assuming it has faiders as well?
On 4/24/2014 1:02 PM, Poppa Bear wrote:
Yes, it has a scrub wheel.
- Original Message - From: Jed Barton jedbar...@gmail.com
To: ptaccess@googlegroups.com
Sent: Thursday, April 24, 2014 8:12 AM
Subject: Re: Digi 003
Hello Ashley, welcom to the list. As far as accessibility of PT, I run a
small home recording studio and I have recorded, mixed and mastered many
clients projects through Protools and that is with learning it over the last
year and a half. Before that I used cakewalk sonar. I have tudored a few
moves up and down.
I think as a blind person having the control surface have moving parts is
a great thing as you can feel your session in a way. Nick Gawronski
On 4/20/2014 1:38 PM, Poppa Bear wrote:
Hello Ashley, welcom to the list. As far as accessibility of PT, I run a
small home recording
. That said, of course,
it's possible to select multiple tracks and Option-click on an insert to
instantiate the same plug-in on all selected tracks and then paste plug-in
settings into each of those.
Slau
On Apr 16, 2014, at 11:23 AM, Poppa Bear heavens4r...@gmail.com wrote:
Slau
I am not in front of my mac right now, but it is in the edit screen under
one of your clusters, I just can't remember the name. If I turn PT on here
soon I will let you know the name of the cluster that you need to interact
with, it is related to the currser.
--
You received this message
Hey Nick, was your school satisfied with your work on that song?
- Original Message -
From: Nick Gawronski
To: ptaccess@googlegroups.com
Sent: Wednesday, April 16, 2014 4:03 PM
Subject: Re: Fading
Hi, I was the student that was talked about in this message and I did a
. :)
YMMV
Chuck
On Apr 11, 2014, at 12:49 PM, Poppa Bear wrote:
I got you Chuck. One other after thought, on bounce down all of that cut
material will not leava blank space I assume. I have had that happen once or
twice, but I think it was because I left just a hair of audio at the end
do not exhist anymore.
So i can't buy one. Which is a bugger, cause they sound like a good option. Any
thoughts welcome.
On 12 Apr 2014, at 2:48 am, Poppa Bear heavens4r...@gmail.com wrote:
Well Steve, I would think about the Digi 002, 003 or avid artust
series. The Digi 002
Ok, if shift and return selects from the incertian point to the beginning of
the song, what command will select from the incercian point to the end of the
song? I have clients who bring in instrumentals that are maybe 70 bars long,
but they only lay down material for half of that sometimes and
to end of session.
On 4/11/14, Poppa Bear heavens4r...@gmail.com wrote:
Ok, if shift and return selects from the incertian point to the beginning
of
the song, what command will select from the incercian point to the end of
the song? I have clients who bring in instrumentals that are maybe 70
Sent: Thursday, April 10, 2014 9:43 PM
Subject: RE: taking the plunge
Hey Poppa bear. I was wondering if you could tell me what audio
interface-soundcard you run with pro tools. I'm interested to know what you
rrun , as I'm about to upgrade, and need more advice on choosing something
will delete to end of session.
On 4/11/14, Poppa Bear heavens4r...@gmail.com wrote:
Ok, if shift and return selects from the incertian point to the beginning
of
the song, what command will select from the incercian point to the end of
the song? I have clients who bring
Option 0 on the num pad will take you to the quantise window, but you will
need to know how to select the audio you want selected for quantisation or
set quantise input, meaning that you will automaticly have your stuff
quantised as soon as you record.
HTH
- Original Message -
From:
not sure about accessibility on there hardware.
As i said, i'm happy to consider all options. I'd also settle for less mic
press if everything else was looking good.
Steve
On 12 Apr 2014, at 2:48 am, Poppa Bear heavens4r...@gmail.com wrote:
Well Steve, I would think about the Digi 002, 003
Thanks for sharing this Chris, if Avid tackles this concept it may indeed be
another game changer. This may be one more reason that the sooner some
become familiar with PT then the better prepaired they will be as this tech
wheel continues to role in new teratories faster and faster and move
Hello Ramie, for the most part, you will always have at least one track
selected. If you are having a problem with wanting to have a track unselected
then creat a new track that you don't need to use and that track will
automaticly be selected. With the Shift R command to arm a track, that
Well Ramy, did any of my advice help?
Take care.
- Original Message -
From: ramy moustafa moshtaqlealga...@gmail.com
To: ptaccess@googlegroups.com
Sent: Friday, April 04, 2014 8:12 AM
Subject: Re: My protools questions
I tryed to abbreviate it
Ramy moustafa saber
Musicc instructor
Hello Ramie, for your latency, you may want to go under the menue, then set up,
then play back ingin and check your buffer size, I usually keep mine at 64
unless I am mixing a project with alot of plugins, then I may take it up.
- Original Message -
From: ramy moustafa
To:
I will try and find the driver page for the 003 under PT 11, but if you did
it on your own, it should not be to hard if you google something like, Digi
003 drivers for ProTools 11.
- Original Message -
From: Krister Ekstrom kris...@kristersplace.com
To: visurfacerea...@freelists.org
: Thursday, March 13, 2014 8:20 PM
Subject: Re: Getting started with Protools 11
RTAS and tDM plug-ins were a different story altogether. AAX has a different
librarian system. Again, almost fully accessible. I'm sure it'll be fixed
soon.
Slau
On Mar 13, 2014, at 10:13 PM, Poppa Bear heavens4r
Hello Chris, I use a 2011 Imac with an external 1TB. My interface is now a
Digi 003, it was a Digi 002. The Imacs from that year and even 20012/2013
can run from $800 to $1300. As I have said before a good friend of mine has
completed maybe a dozen or so projects for clients using a 2011 Mac
Chris, You just had to go and forward this , well, $$$, luckely the studio
has been going well and I have work everyday almost and I may be able to
give some of this stuff a run.
- Original Message -
From: Chris Smart csma...@cogeco.ca
To: ptaccess@googlegroups.com
Sent: Friday, March
It depends on what version of PT you want, you can get a good copy of PT 9
from Ebay for around $200, the newest PT 11 will run around $400 $500 and
less if you have an instatutional student discount. Also, yes that set up
would work, my Church is using the Apollo quad with PT 11 and the mackie
gonna give you his ilok with the licenses on it already and give
you the username and password to hhis ilok account? Cuz otherwise there may be
fees involved with transferring the licenses from one ilok account to the other.
On Mar 12, 2014, at 8:49 PM, Poppa Bear heavens4r...@gmail.com wrote
I was checking these out yesterday online. I wonder how they are on PT11.
The Church I go to has one. I wonder if the 32bit floating point they have
is a step up or down from PT 64 capabilities? Never the less, it is nice to
know now. Thanks for the feedback.
- Original Message -
From:
to jump on it before i ask for his contact
info and do myself lol
On Mar 13, 2014, at 2:37 AM, Poppa Bear heavens4r...@gmail.com wrote:
He never actavaded it and he has an Iloc that he will throw in. John, I
will upgrade to Mavrics if I do this.
- Original Message
I just read some info from the UA sight and they have free upgrades to all
of their plugs that bring them up to the 64 PT11 AAX versions. Good to know.
- Original Message -
From: mcdiemert . mcdiem...@gmail.com
To: ptaccess ptaccess@googlegroups.com
Sent: Thursday, March 13, 2014 5:04
things as I do with
Sonar and that is accessible working with effects, changing the parameters
of them, etc.
Protools has some real time effects, such as reverbs right? Are they
accessible with VoiceOver
Many thanks,
Christian
On 2014-03-12 at 16:51 Poppa Bear wrote:
There is no PT access
] On
Behalf
Of Poppa Bear
Sent: Friday, March 14, 2014 4:51 AM
To: ptaccess@googlegroups.com
Subject: Re: Re[2]: Getting started with Protools 11
Yes they do, they have an extinsive sweet of native affects just like
Sonar.
All of the native settings for the plugins unlike Sonar are accessible
good. How is it, does protools have a Gm synth, like the cakewalk
Tts1 in Sonar?
Christian
-Original Message-
From: Poppa Bear heavens4r...@gmail.com
Sent: den 13 mars 2014 19:51
To: ptaccess@googlegroups.com
Subject: Re: Re[2]: Getting started with Protools 11
Yes they do, they have
Hello Raymie, contact me off list and we can go from there. I know enough to
take care of me and my clients, but your needs may be more in depth than I
typicaly go into when using PT.
heavens4r...@gmail.com
- Original Message -
From: ramy moustafa moshtaqlealga...@gmail.com
To:
I don't use the Avid native plugin presets very often, but in my version of
8 they are accessible, was that lost at some point? As far as everything
Slau is talking about with a control surfase I agree. Some do get by with a
simple interface like an M-box, but I think that for navigating
I have a good friend who has PT 10 with the upgrade to 11. He wants to let it
go for $200. I want to get it, but is there any questions I should ask a head
of time to make sure I don't get tangled up in some problamatic web?
Thanks for any thoughts.
Thanks
--
You received this message because
There is no PT access on the PC just so you know. You have to have a mac.
- Original Message -
From: Christian christia...@runbox.com
To: ptaccess@googlegroups.com
Sent: Saturday, March 08, 2014 9:55 PM
Subject: Getting started with Protools 11
Hi all,
I am going to try out Protools
I use Pan man as well.
- Original Message -
From: mcdiemert . mcdiem...@gmail.com
To: ptaccess@googlegroups.com
Sent: Wednesday, March 05, 2014 7:06 AM
Subject: Re: Instructions for using clip gain.
Pan man from sound toys is fairly accessible! I really like the
algorithms are
enabled, muting one track would mute everything so it's much
more obvious. At any rate, I'd be curious to know whether the solo and mute
functionality is not working, regardless of shortcuts.
Slau
On Mar 3, 2014, at 8:00 PM, Poppa Bear heavens4r...@gmail.com wrote:
Does anyone know why
Mono one and two should be the same as line in.
- Original Message -
From: Alan Macdonald
To: ptaccess@googlegroups.com
Sent: Tuesday, March 04, 2014 9:35 AM
Subject: Digi 002 and USB numpad. 2 quick questions
Hi all,
I have recently upgraded from pro tools nine to
your system, all bets are off and you should certainly make sure
that Link Track and Edit Selection is checked under the Options menu. If that
isn't checked, it won't all work the way you expect. Hopefully, that helps. Let
us know.
Slau
On Mar 4, 2014, at 10:33 AM, Poppa Bear heavens4r
it up. This applies for only tracks that are
shown. In other words, if tracks 2 through 4 are hidden, pressing
Control-semicolon will move the insertion cursor from track 1 to track 5.
HTH,
Slau
On Feb 26, 2014, at 1:56 PM, Poppa Bear heavens4r...@gmail.com wrote:
So when I copy
, crate a new track and paste, the copied audio will
appear in the newly created track. As usual, it's always recommended to make
keep track and edit selections linked in the Options menu.
Slau
On Feb 26, 2014, at 3:38 PM, Poppa Bear heavens4r...@gmail.com wrote:
Thanks, so let me see if I
I have heard alot of good things about this plug, some use it over the waves
L2 stuff.
- Original Message -
From: Chris Smart csma...@cogeco.ca
To: ptaccess@googlegroups.com
Cc: midi...@midimag.org
Sent: Sunday, February 23, 2014 6:29 AM
Subject: Fwd: Voxengo Elephant 4.0 mastering
I would like to get it for the mac, but I am only on PT 8 and that version
does not support UA plugs with voiceover. I rarely use the PC anymore, but
If I upgrade to PT 11 which provides access to UA plugs, I am going to
invest in a bunch of Vox stuff.
- Original Message -
From: Chris
be
able to detect whether the controls were functioning.
Slau
On Feb 19, 2014, at 1:56 AM, Poppa Bear heavens4r...@gmail.com wrote:
I tried the num commander, but I will check out the num pad prefs. One
other thing, I have been having a bunch of PT sessions on my PT that were
created
, at 10:33 AM, Poppa Bear heavens4r...@gmail.com wrote:
Slau, thanks, I will look for that. Right now it is becoming a huge pain in
the rear. My transports work on my surface, but after using the keyboard for so
long it is a matter of work flow and frustration of not understanding my setup
able to enter
other stuff from the keypad like, for example, a value for the main counter? If
that works, the rest should work, barring a change to the num pad preferences
under Pro Tools preferences.
Hmm.
On Feb 19, 2014, at 10:33 AM, Poppa Bear heavens4r...@gmail.com wrote:
Slau
So, after letting my mac sleep I turned it back on this morning and the problem
is gone. I turnned it off and on last night a few times in hopes that some kind
of mojo could take place and apparently the PT Gods smiled down on me because
now it is working fine. I have now had a few freak things
hold your breath. In
the mean time, yeah, just burn from the Finder.
Slau
On Feb 17, 2014, at 9:13 PM, Poppa Bear heavens4r...@gmail.com wrote:
I am just not that slick on the Mack I guess. I am opperating on a Spartin
Protools war path and that is all I know on the Mack for the most
Something was changed in my PT and I think that it is related to the transport.
The 1 and 2 keys do not bring me back and forward now. I don't even think that
3 will start record. Any thoughts on how to trouble shoot this.
Thanks
--
You received this message because you are subscribed to the
Does anybody on the list use CD burning programs outside of Itunes that are
accessible on the Mac? I have tried to infasize to my clients that they should
be trying to bring thumb drives, but so many still don't. I end up shuffling
back and forth between my PC and the mac to burn CD's. Does
: Monday, February 17, 2014 2:22 PM
Subject: Re: CD burner?
Why not just burn discs right from the Finder? Throw the stuff in a folder,
right-click and choose burn. Any reason why that won't work for your needs?
Slau
On Feb 17, 2014, at 4:58 PM, Poppa Bear heavens4r...@gmail.com wrote
For the most part, you will need to have somebody who is sighted click on
the load button for that plug and if the preset name is big thunder, then
after they load it you would go to the Protool settings, click save as and
right Big Thunder and then it would be accessable as a PT preset in the
Here is a question that may run in the same vein. If I want to import a
track from the audio folder of that session, can I place a marker or the
currser in the exact spot I want the track to import into? This is how Sonar
works, where ever you are at in the track, the new audio will import to
location. Naturally, it would
still be helpful to have a way to accomplish the task with dragging or
keyboard shortcuts.
Slau
On Feb 12, 2014, at 1:25 PM, Poppa Bear heavens4r...@gmail.com wrote:
Here is a question that may run in the same vein. If I want to import a
track from the audio
Hey folks a friend of mine messed with a session on PT and now instead of the
track restarting where the currser was when I started the playback, it now
plays where I stopped the playback. Does anybody know where I can go to change
this? I have a three hour session in the morning with a client
is also
visible within the Operations tab of the Preferences window.
HTH,
Slau
On Feb 10, 2014, at 3:36 AM, Poppa Bear heavens4r...@gmail.com wrote:
Hey folks a friend of mine messed with a session on PT and now instead of
the track restarting where the currser was when I started
Subject: Re: Play back setting changed
Control-n toggles insertion following playback. The preference is also
visible within the Operations tab of the Preferences window.
HTH,
Slau
On Feb 10, 2014, at 3:36 AM, Poppa Bear heavens4r...@gmail.com wrote:
Hey folks a friend
FYI, I recently instaled the UR compressors and EQ bundles and they are all
accessible on PT version 8 on Lion. I also instaled the Waves one knob bundle
which is accessible via control serfase. I got the Sound Toys bundle which is
accessible with a combonation of keyboard commands and control
Here is a link to the T-pain plugin bundle. It has a free 10 day trial and the
auto tune affect is called the T-pain plugin affect.
http://www.izotope.com/products/audio/tpaineffect/
--
You received this message because you are subscribed to the Google Groups Pro
Tools Accessibility group.
To
, although that doesn't seem to make sense if you're able
to
open older 10.x sessions. Hmm...
Slau
On Jan 30, 2014, at 1:48 PM, Poppa Bear heavens4r...@gmail.com
wrote:
Also, when you get to that unknown screen when launching 11 can you
get down to the file bar and go to open recent sessions and try
Slau, could it be a resolution issue? I can't remember if the 003 only
supports up to 96KHZ play back.
- Original Message -
From: Slau Halatyn slauhala...@gmail.com
To: ptaccess@googlegroups.com
Sent: Sunday, February 02, 2014 1:58 PM
Subject: Re: question about playing back a pro tools
of recordings you can and
you can get 80% to 90% of the way there before you add anything else to
your mix or master.
On Jan 31, 2014, at 4:34 PM, Poppa Bear heavens4r...@gmail.com wrote:
Also, remember this, if you don't have good mixing skills, these
Mastering plugins will often only magnify any lack
Hey Chuck, do you know anybody who has the SSL/ API/ S 1 Imiger, CLA's
Massi, or JJP waves presets? I also have the C6 series of plugs that I am
wondering about. Thanks for your help in the past with presets, they have
been a great help.
Thanks
- Original Message -
From: CHUCK REICHEL
Also, remember this, if you don't have good mixing skills, these Mastering
plugins will often only magnify any lack of mixing skills, or even worse,
mask the problems leading a person to think they did a good job. At that
point the Mastering plugs can become a crutch that cause people to think
him in perfect peace, whose mind is stayed on thee: because
he trusteth in thee.
In GOD I Trust
On Jan 31, 2014, at 4:16 PM, Poppa Bear wrote:
Hey Chuck, do you know anybody who has the SSL/ API/ S 1 Imiger, CLA's
Massi, or JJP waves presets? I also have the C6 series of plugs
Did you read the reply I wrote on the midi mag list? You will be best off
going with either PT 11 with the latest PT updates on Mavric or PT 9 with
the latest PT updates on Lion or Mountain Lion. On PT 9 the RTAS plugins are
accessible and AAX are usable with a control surface and in 11, the
, 2014 6:12 PM
Subject: Re: accessibility of ProTools?
Yes I did. That was very helpful. So my correct in thinking that there is no
accessibility at all on the Windows side with jaws for Windows?
Sent from my iPhone
On Jan 28, 2014, at 9:53 PM, Poppa Bear heavens4r...@gmail.com wrote:
Did you
Chuck Righchul on this list knows the functions/key commands to get it
working, perhaps he will chime in, or I can dig around in my email archives
and repaiste them.
- Original Message -
From: chad baker baker3...@gmail.com
To: ptaccess@googlegroups.com
Sent: Saturday, January 18, 2014
Does anybody on the list know if the Native Instruments Machine Softwaere is
accessible on the Mac? I am thinking about picking up their MKII beat machine
for the studio.
Thanks
--
You received this message because you are subscribed to the Google Groups Pro
Tools Accessibility group.
To
I believe that if anyone uses the 003 with PT 11 they need to replace the
digi audio core maniger with a new Digi family core driver, or some name
like that.
- Original Message -
From: Slau Halatyn slauhala...@gmail.com
To: ptaccess@googlegroups.com
Sent: Thursday, January 16, 2014
One thing that happens with the 002's, when you turn them on, they are on
mute and you have to unmute them each time. I am usually reminded of this
because when I press play and I don't get any audio out of the moniters I
get sound out of the head phones on my desk. Just keep that in mind in
Kamron, I remember that you have a liquid channel interface, is the softwaere
control program accessable through either PT or the Liquid control softwaere
itself?
Thanks
--
You received this message because you are subscribed to the Google Groups Pro
Tools Accessibility group.
To unsubscribe
I'm downloading these, will let you guys know what I think. Thanks for
sharing Matt.
- Original Message -
From: matt diemert mcdiem...@gmail.com
To: ptaccess ptaccess@googlegroups.com
Sent: Tuesday, January 14, 2014 5:45 AM
Subject: Massy plugins
Hi all,
for those of you who may be
Yes, I used it the other day when mixing down a session and it puts out some
very intresting studders. I found that it is very easy to over use so in
total I used it for only about 4 bars in a song and that was broken up in
two spots. Remember that you need to set up an audio track and arm it,
Hello folks, I notice that sometimes none of my meaters will show any activity
and I have to just play by ear. I can close the channel, close the session or
minamise the tracks that are being shown and still nothing. Any work arounds to
get the meaters bouncing again?
Thanks
--
You received
of level meters within the session. You can arrow up and
down within this list and it will update. This is actually a quick way to check
levels throughout the session.
HTH,
Slau
On Jan 13, 2014, at 3:50 PM, Poppa Bear heavens4r...@gmail.com wrote:
Hello folks, I notice that sometimes
Does anybody know if the Sound Forge native plugins show up in PT and if so,
does anybody know if they are accessible? Thanks for your help
--
You received this message because you are subscribed to the Google Groups Pro
Tools Accessibility group.
To unsubscribe from this group and stop
follows what ever track is selected, if I need to sol up
ultiple things I make my selection across those tracks first then
solo.
Hope this helps.
On 1/10/14, Poppa Bear heavens4r...@gmail.com wrote:
I don't want to highjack your post, but I am wondering something about
soloing as well
Here is an artical I read last night after hearing an ingineer talk about using
multable master busses inbetween tracks and aax busses to be able to gain more
head room in the mix and control source signals better.
http://www.soundonsound.com/sos/jun10/articles/pt_0610.htm
--
You received
301 - 400 of 716 matches
Mail list logo
