I think it is because of the integrated chipset in my nForce, or maybe because of the screen which has not the good values of refresh rates.
What do you think about ?
Alexis MOREAU [EMAIL PROTECTED] wrote:
Hello everybody,
Yesterday one my HDunder Windows died (RIP) and I decided to make an
hi
has someone successfully installed an ibm xseries 345 under redhat 7.0
i have here two machines:
machine A with lsilogic 1030
machine B with serveraid 5i (which uses the lsilogic 1030)
machine A installes fine
machine B doesnt
same BIOS, ...
if i remove the serveraid, the two machines should
Hi Folks,
I am looking to create an alternative shell menu, using open source
software similar to pdmenu which was designed for Debian GNU/Linux. Does
anyone know of, or can recommend, any shell menu type programs which are
relatively simple to install and easy to configure with a moderate level
Hi,
My server is running on RH8.0 but my client is RH7.2. The NTP version in Server is higher than client. I changed the firewall configuration to allow ntp. Still I am unable to synchronise the time.
I used setup-firewall configuration-customize and added ntp in the others column.Is it correct
Hi,
I am trying to configure a system as gateway between two lans. The gateway system is having two ethernet. One ethernet is connected with one lan and another ethernet is connected with another lan. The eth0 ip is 178.1.a.1 and eth1 ip is 178.1.b.1
All the systems are in a same switch.The lan1
Hi,
I am trying to configure a system as gateway between two lans. The gateway system is having two ethernet. One ethernet is connected with one lan and another ethernet is connected with another lan. The eth0 ip is 178.1.a.1 and eth1 ip is 178.1.b.1
All the systems are in a same switch.The lan1
hi Edward,
i think that you resolv.conf file is ok, you must look
at /etc/named.conf file instead. you can add there any master zone for
any domaine you want, after having modified this file, restart your
named daemon.
if something is going wrong,look at the /var/log/messages to resolve
it !
Thank you rday for your suggestion regarding joining splitted files. It worked successfully.
Regards,
Saravanan
Message: 4Date: Tue, 7 Jan 2003 05:33:04 -0500 (EST)From: "Robert P. J. Day" [EMAIL PROTECTED]To: [EMAIL PROTECTED] Subject: Re: Split and Join ...Reply-To: [EMAIL PROTECTED] On Tue, 7
On Thu, 9 Jan 2003, trysaran wrote:
What is the problem is, I am unable to ping the eth1 in the gateway
itself. What I have to do to configure the above.
Post the following:
1. The output of ifconfig
2. The output of netstat -rn
3. The output of cat
Thanks,
None of the suggestions so far have worked... but thanks to all who have
tried to help. Have spent an evening with two of us carrying out further
tests and have eliminated the network hardware. have also eliminated a
regular error (every 15 mins) where we omitted a domain server line
Hi John Nichel,
To find the samba version just type rpm -qa | grep samba. This will list the samba package complete name with version. Then you can give rpm -e samba...
Regards,
Saravanan
Message: 2Date: Wed, 08 Jan 2003 16:48:28 -0600From: John Nichel [EMAIL PROTECTED]Organization:
I'm not certain about the 827 but on all the 800 series routers I've ever
used the ethernet ports on the rear of the router were shared media so you
wouldn't be able to nat the private addressing and route the public
addressing you would have to just configure one ip address on the ethernet
Hello,
I am using RedHat 72 and i would like to make a C program which delete a file in a directory.
Could you tell me how?
Thanks in advance
CanarichDo You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français !
Testez le nouveau Yahoo! Mail
Josh,
As a general rule any won't get much response without a very specific
question, and it's a good idea to mention what you've tried. Since you're
new, heres a brief introduction to finding opensource information.
1 Visit the library or distro home page, find links to documentation or
`man 2 unlink` gives:
UNLINK(2)
Linux Programmer's
Manual
UNLINK(2)
NAME unlink - delete a name and
possibly the file it refers to
SYNOPSIS #include
unistd.h
int
unlink(const char *pathname);
- Original Message -
From:
cana rich
To: [EMAIL PROTECTED]
Sent:
Hi,
I just installed lirc-0.6.5-fr3 for my RH8 box with Askey Magic TView
tv-card. When I start the lircd service I see this at /var/log/lircd:
--snip--
[root@bahama remotes]# tail /var/log/lircd
Jan 6 14:40:44 bahama lircd-0.6.5: lircd(any) ready
Jan 6 14:40:44 bahama lircd-0.6.5: accepted
Hi all,
I'm looking for a mailing list/user group/whatever where I can find info
on linux hand held devices. I know that the Sharp Zarus exists, but I'm
interested in info about software for it and its capabilities. (I've been
chasing through palm ce software without success)
Thanks,
Mark
Mark Neidorff said:
Hi all,
I'm looking for a mailing list/user group/whatever where I can find info
on linux hand held devices. I know that the Sharp Zarus exists, but I'm
interested in info about software for it and its capabilities. (I've been
chasing through palm ce software without
On Thu, 9 Jan 2003 05:25:13 -0500 (EST) Mark Neidorff [EMAIL PROTECTED]
wrote:
Hi all,
I'm looking for a mailing list/user
group/whatever where I can find info
on linux hand held devices. I know that the
Sharp Zarus exists, but I'm
interested in info about software for it and
its
On Thu, Jan 09, 2003 at 05:25:13AM -0500, Mark Neidorff wrote:
Hi all,
I'm looking for a mailing list/user group/whatever where I can find info
on linux hand held devices.
remainder snipped
Mark,
try also www.myzaurus.com
Pete
--
Pete Nuwayser [EMAIL PROTECTED]
Federal Trade Commission
Hi,
I attached and pasted the output of ifconfig. The value for cat /proc/sys/net/ipv4/ip_forward is 0.
Looking for your suggestion.
Regards
Saravanan
eth0 Link encap:Ethernet HWaddr 00:B0:D0:F9:A9:FB inet addr:178.1.221.1 Bcast:178.1.221.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST
Title: Message
I know we have beat
this horse to death, but my php is still not working. I have tried all the
suggestions everyone has posted but still, php is not
working.
If some of you Red
Hat Tech Support people are 'listening', please feel free to jump in and
help. I read the FAQ on
Title: Message
Hi,
my_2_cents
I didn't
follow teh topic.
How do you
install PHP to work with your apache ?
Did you
enable particular api? Third part or something else ?
The order is
kind of important.
What was the
ways of the severals installation ?
/my_2_cents
--
ism
-Message
At 02:21 PM 1/9/2003 +1000, you wrote:
I have that [SWAT] installed. It came with the RH8.0 files.
However, it is a
limited version of swat, in that in only allows you to see a
few things and
change the passwd but not able to edit the smb.conf file
etc.. Maybe I
need a new/annother
At 07:44 AM 1/8/2003 +, you wrote:
There is a web based tool called swat which will help setup samba. You can
find the RPM for swat on the redhat distribution CD's
Will an installation from the CD's give you all that you need. I mean, if
somehow I was able to load the CD's back in and
I would suggest Webmin over SWAT. Since I've been using Webmin, I've had no
need for SWAT, though I do occassionally edit smb.conf by hand (which can
even be done via Webmin).
JAV
-- Original Message ---
From: Ted Gervais [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thu, 09
If they are scsi drivers, just do mkinitrd:
mkinitrd -v -f /path/to/initrd.img `uname -r`
If you you are trying to load some other kind of driver do:
mkinitrd -v -f /path/to/initrd.img --with=module name `uname -r`
-Steve
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
Thanks for all the replies.
% strings FILE text.txt
works in a pinch.
Warmest Regards,
Tim
--
/**
* Timothy Stone . Sun Certified Java Programmer
* Web Master . tstone at cityofhbg dot com
* City of Harrisburg . 717.255.7297
* Pennsylvania USA . 717.903.9162
*
*
I have php and php-mysql packages installed. I changed the 'short_open_tag' to on
as suggested. When I run a script I got from the PHP website tutorial all I get as
output is the script itself.
This is the script and what it look like when I run it:
html
head
titlePHP Test/title
/head
Gentlefolk,
The subject line sez it all. Is anyone aware of a Linux-native speed
test utility wandering about somewhere? It'd probably have to tie into
one of the hosts for Win-based testers, I'd think. (Infrastructure in
place already--test files of known size for transfer, etc.) Otherwise
Hello all!
I have the followig problem when i try update my red hat
8, can anyone help-me?
[root@server log]# up2date -u
Fetching package list for channel: redhat-linux-i386-
8.0...
Fetching Obsoletes list for channel: redhat-linux-i386-
8.0...
Thomas E. Dukes [[EMAIL PROTECTED]] wrote:
I know we have beat this horse to death, but my php is still not
working. I have tried all the suggestions everyone has posted but
still, php is not working.
I don't have the history on this thread, and I'm *not* in Tech
Support,
On Thu, Jan 09, 2003 at 07:51:52AM -0600, Dave Ihnat wrote:
Gentlefolk,
The subject line sez it all. Is anyone aware of a Linux-native speed
test utility wandering about somewhere? It'd probably have to tie into
one of the hosts for Win-based testers, I'd think. (Infrastructure in
place
Do you have any messages in /var/log/messages with a timestamp around
this time?
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
trysaran wrote:
Hi,
My server is running on RH8.0 but my client is RH7.2. The NTP version in
Server is higher than client. I changed the firewall configuration to
allow ntp. Still I am unable to synchronise the time.
I used setup-firewall configuration-customize and added ntp in the
others
On Wed, 2003-01-08 at 16:54, Edward Dekkers wrote:
I'm surprised no-one had recommended Intel Mainboards?
Why not?
They are without a doubt (after 9 years of business and trying HEAPS of
others), the most reliable motherboards I've ever used (well, bar the
CC820 - but that's the
trysaran wrote:
Hi,
I attached and pasted the output of ifconfig. The value for cat
/proc/sys/net/ipv4/ip_forward is 0. Looking for your suggestion.
Regards
Saravanan
eth0 Link encap:Ethernet HWaddr 00:B0:D0:F9:A9:FB inet
addr:178.1.221.1 Bcast:178.1.221.255 Mask:255.255.255.0 UP BROADCAST
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 9 Jan 2003 12:08:17 -0200, honey2000 wrote:
[root@server log]# up2date -u
Fetching package list for channel: redhat-linux-i386-
8.0...
Fetching Obsoletes list for channel: redhat-linux-i386-
While RedHat clearly has made an admirable effort to produce a consumer
ready desktop on the Linux OS, a few areas were shortchanged by the new
release. Video and sound installation work well on older, well known
system boards and plugin cards. But, some later hardware has been left
dangling, so
At 08:37 AM 1/9/2003 -0400, you wrote:
I would suggest Webmin over SWAT. Since I've been using Webmin, I've had no
need for SWAT, though I do occassionally edit smb.conf by hand (which can
even be done via Webmin).
JAV
OK.. I just installed Webmin. Thought it might be a good alternative to
I've written a Mini-HOWTO on compiling the kernel:
http://www.eclectic-cheval.net/linux/kr-mhowto.txt
I've posted it here for two reasons:
1) In case it will help, and
2) To get suggestions from those who know more than I do.
It's licensed under the FDL, so hack away.
Daniel.
--
Bash forehead
Problem:
Network with Dell 2500 Redhat 7.3 dual network card (Bonded) operates
slow
at times with Windows 2000 workstations using MS Access, MS Word and
Sage
Accounts. Mapped drives and files disconnect/fail to read at times.
Comment:
Above setup works ok on another system
Hi,
We are using redhat 7.3 on Compaq DL360 2 processors with kernel
2.4.18-10smp without problem to make POP3 server, with Courier IMAP
1.6.2 and NetApp Filer F760 as NFS server.
We have upgrade one server with latest kernel without changing
parameter. And the load average are high.
Servers
I am running 3 boxes withe rh7.0 and opera5.0 for web search. A problem
has occured on all of them, that opera suddenly stops and terminate
completely.
If I start opera from terminal, and this happens I find the message
segmentation error (core dumped) in the terminal window when opera has
Hi, all
I'm trying to compile my brand new bind 9.1.3. The instructions and the
O'Reilly book and the Linux Documentation project says to simply type
./configure, but it doesn't work. I tried installing the bind-utils.rpm(not
exactly name), but no luck. I tried to install the
On Thu, 2003-01-09 at 08:08, paal wrote:
I am running 3 boxes withe rh7.0 and opera5.0 for web search. A problem
has occured on all of them, that opera suddenly stops and terminate
completely.
If I start opera from terminal, and this happens I find the message
segmentation error (core
I am a happy RH user; have been since 5.2. But I have never really
learned who is who and what is what in regard to the desktop world, i.e.
kde versus gnome (the only two I have ever used).
I have mostly been using gnome under RH8.0, but I don't really love
nautilus. Who makes it?
If I go to the
Title: RE: unsubscribe
unsubscribe
-Original Message-
From: David Penton [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 09, 2003 8:21 AM
To: [EMAIL PROTECTED]
Subject: who makes nautilus?
I am a happy RH user; have been since 5.2. But I have never really
learned who is who
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 9 Jan 2003 09:17:32 -0700, Craig Cameron wrote:
I'm trying to compile my brand new bind 9.1.3. The instructions and
the O'Reilly book and the Linux Documentation project says to simply
type./configure, but it doesn't work.
What doesn't
On Thu, Jan 09, 2003 at 09:17:32AM -0700, Craig Cameron wrote:
Hi, all
I'm trying to compile my brand new bind 9.1.3. The instructions and the
O'Reilly book and the Linux Documentation project says to simply type
./configure, but it doesn't work.
If somebody could point me in the
Richard Worwood wrote:
I'm not certain about the 827 but on all the 800 series routers I've ever
used the ethernet ports on the rear of the router were shared media so you
wouldn't be able to nat the private addressing and route the public
addressing you would have to just configure one ip
On Thu, 2003-01-09 at 10:20, David Penton wrote:
I am a happy RH user; have been since 5.2. But I have never really
learned who is who and what is what in regard to the desktop world, i.e.
kde versus gnome (the only two I have ever used).
I have mostly been using gnome under RH8.0, but I
I tried that script also but had no success either. Maybe I should just do a complete
re-install. Something isn't right. Other than the obvious packages, php apache,
are there any other required files to run php? Iask this because I didn't install the
complete RH disk set.
TIA
From:
On Thu, 2003-01-09 at 08:20, David Penton wrote:
I am a happy RH user; have been since 5.2. But I have never really
learned who is who and what is what in regard to the desktop world, i.e.
kde versus gnome (the only two I have ever used).
I have mostly been using gnome under RH8.0, but I
I had RH7.2 on my laptop and had to wait nearly 2 months (to get the disks
right) to be able to install 8.0, or rather do an upgrade to 8.0. I have
been a Red Hat user since version 3.0.
Unfortunately this upgrade came to me as a GREAT disappointment:
1) The new desktop, that BlueSomething thing
On Thu, 2003-01-09 at 08:45, Dave Sherman wrote:
Nautilus was originally a product developed by Eazel. That company went
bankrupt, and they sold (or maybe gave) the source code to Ximian, the
folks who develop Ximian Gnome. Ximian has since done a great job of
maintaining Nautilus, so that it
[EMAIL PROTECTED] wrote:
Hello I am a n00bie to Red Hat Linux. I am wanting to get the server started on
my Red Hat Linux 8.0 I installed everything on the cd's so I have all of the
components to get the ball rolling. But my problem is getting it started, I
really don't know where to start. If
On Thu, Jan 09, 2003 at 05:58:03PM +0100, Emilio wrote:
4) It seems impossible to configure ANY of the SawFish window management
parameters. Using the explorer thing, when you reach the SawFish folder
and click on any of the parameter groups (Focus, Sounds, etc.) simply does
nothing. I
I was trying to do aliasing of my eth0:
but all the time I get an error the intrerfce not recorgnized
I checked for the file /proc/net/ip_alias in my kernel i found that
it is not there.
The instraction I have from the manual I used told me that I have
to recompile my kernel to include that
Thank you for your answer. I will try with the latest I have, I think it is RH 7.1, and then try to update and install nVidia drivers.
Thank you
Tom Curl [EMAIL PROTECTED] wrote:
While RedHat clearly has made an admirable effort to produce a consumerready desktop on the Linux OS, a few areas were
On Jo, 2003-01-09 at 18:58, Emilio wrote:
8) Previously I was able to configure GDM to use faces that no longer
seems possible
I haven't tried it, but I assume the old GDM look it's available if you
select Standard greeter ( instead of graphical ) from gdm configurator,
General tab.
--
Soluţii
I just built a new RH 8.0 box. I have been trying to build various packages
from their source RPMS and have found two (what I consider quite serious
issues).
1) rpmbuild -ba gcc32.spec does not work on an RH 8.0 box using a standard
RH 8.0 intall with all the development tools installed. I
My OS is RedHat linux 7.3. I have read the mount manpage, but I'm unclear
about one thing:
If I mount an ext3 filesystem with the 'defaults' option, I get
rw,suid,dev,exec,auto,nouser,async.
Now, I want to mount it with the noatime option. Do I remove the
word 'defaults' and replace it with
On Thu, 2003-01-09 at 08:58, Emilio wrote:
I had RH7.2 on my laptop and had to wait nearly 2 months (to get the disks
right) to be able to install 8.0, or rather do an upgrade to 8.0. I have
been a Red Hat user since version 3.0.
Unfortunately this upgrade came to me as a GREAT disappointment:
IT just says no such file or directory. I installed the BIND software with
the installation of RedHat itself.
Correct me if I'm wrong, but doesn't the ./ look for your command in the
root directory?
-Original Message-
From: Jeffrey Tadlock [mailto:[EMAIL PROTECTED]]
Sent: Thursday,
2) As usual from all the upgrades, the upgrade method completely breaks
down/destroys all the desktop URL shortcuts. After the upgrade you see
urlABXCY86xErer or something like that and the shortcut is useless. Same
thing happened in previous upgrades, every time I had to remove them and
Rather than compile 9.1.3, would it not be simpler to download and install
9.2.1?
On Thu, 9 Jan 2003, Craig Cameron wrote:
Hi, all
I'm trying to compile my brand new bind 9.1.3. The instructions and the
O'Reilly book and the Linux Documentation project says to simply type
./configure,
I can understand the reasons for some of the things that
RedHat deleted from RedHat8.0, but why did they delete
METAMAIL when several (all?) mail readers depend on it???
--
Reg.Clemens
[EMAIL PROTECTED]
--
On Thu, 2003-01-09 at 09:59, Nathan G. Grennan wrote:
2) As usual from all the upgrades, the upgrade method completely breaks
down/destroys all the desktop URL shortcuts. After the upgrade you see
urlABXCY86xErer or something like that and the shortcut is useless. Same
thing happened
[EMAIL PROTECTED] [[EMAIL PROTECTED]] wrote:
I tried that script also but had no success either. Maybe I should just do a
complete re-install. Something isn't right. Other than the obvious packages, php
apache, are there any other required files to run php? Iask this because I didn't
snip
RedHat or even Linux (consider WinXP). If everything stayed the same,
we'd still be using FVWM or TWM.
HEY! I liked FVWM! I spent an eternity writing a config file for it, to
get it to look/act the way I wanted it to. I don't use it anymore... But
it was great stuff!
Ric
--
On Thu, 2003-01-09 at 10:18, Tibbetts, Ric wrote:
snip
RedHat or even Linux (consider WinXP). If everything stayed the same,
we'd still be using FVWM or TWM.
HEY! I liked FVWM! I spent an eternity writing a config file for it, to
get it to look/act the way I wanted it to. I don't use
I'd probably have the same problem.
Does anybody know what directory the BIND software is in?
Thanks.
-Original Message-
From: Mike Burger [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 09, 2003 11:09 AM
To: 'RedHat listserv (E-mail)'
Subject: Re: BIND ./configure
Rather than
On Thu, Jan 09, 2003 at 10:53:13AM -0700, Craig Cameron wrote:
IT just says no such file or directory. I installed the BIND software with
the installation of RedHat itself.
I am a little confused. Did you download the source code to
compile on your own or did you download an RPM to install
When I installed Linux, I chose to install networking and DNS BIND.
Thanks.
-Original Message-
From: Jeffrey Tadlock [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 09, 2003 11:38 AM
To: [EMAIL PROTECTED]
Subject: Re: BIND ./configure
On Thu, Jan 09, 2003 at 10:53:13AM -0700,
On Thu, Jan 09, 2003 at 11:52:59AM -0700, Craig Cameron wrote:
When I installed Linux, I chose to install networking and DNS BIND.
So you are planning on using BIND that came installed with Red
Hat, correct?
You may want to head to http://www.redhat.com and look at the
documentation on
I am running RH 8.0. When I installed it, I chose the custom setting. That may be
the problem because I didn't install a lot of the programming/development packages. I
can't tell you specifically at this this as I am a work but when I get home this
evening, I will install everything in that
I have 7.3 running on an HP e800 server with 256M and 9gig of space.
First indication was the system would not respond to anything except ping.
At the console the error messages were Out Of Memoryyada yada.
Upon further investigation, running TOP shows logrotate as having 98% of CPU and a
On Thu, Jan 09, 2003 at 03:02:18PM -0500, Jeff Myers wrote:
I have 7.3 running on an HP e800 server with 256M and 9gig of space.
First indication was the system would not respond to anything except ping.
At the console the error messages were Out Of Memoryyada yada.
Upon further
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Tibbetts, Ric wrote:
| snip
|
| RedHat or even Linux (consider WinXP). If everything stayed the same,
| we'd still be using FVWM or TWM.
|
|
| HEY! I liked FVWM! I spent an eternity writing a config file for it, to
| get it to look/act the way I
On Thu, Jan 09, 2003 at 03:02:18PM -0500, Jeff Myers wrote:
I have 7.3 running on an HP e800 server with 256M and 9gig of space.
First indication was the system would not respond to anything except ping.
At the console the error messages were Out Of Memoryyada yada.
Upon further
Francisco Neira wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Tibbetts, Ric wrote:
| snip
|
| RedHat or even Linux (consider WinXP). If everything stayed the same,
| we'd still be using FVWM or TWM.
|
|
| HEY! I liked FVWM! I spent an eternity writing a config file for it, to
| get it to
I am unable to get NFS to function after a Red Hat 7.3 install.
I can neither get remote clients to mount directories exported from the 7.3
system or get the 7.3 system to mount remote directories.
First the machinenames:
libros -- RedHat 6.3 mailsever
zaragoza -- RedHat 7.2 Oracle server
On Thursday 09 January 2003 15:54, Cliff Wells wrote:
On Thu, 2003-01-09 at 13:35, Jianping Zhu wrote:
i have redaht 7.3. after i start my computer it will go gui mode. I
prefer it to go text mode after i start it.
what change should i made in order to acheave this goal?
If you are using
Spamassassin 2.43 uses perl-5.6.1 (RH 7.3). RH 7.1 uses perl-5.6.0.
Conquently, attempts to install on 7.1 result in an error:
[root@www Mail-SpamAssassin-2.43]# perl Makefile.PL
Warning: prerequisite HTML::Parser failed to load: Can't locate
HTML/Parser.pm in @INC (@INC contains:
Sigh...
This isn't a request for help (I already tracked down and shot the
bug) but pppd on RedHat 7.x and 8.0 (haven't checked the 8.1 beta yet)
did not get compiled with IPv6 enabled. Found out the hard way when
pppd didn't like the ipv6 option in the config file. The man pages
for
rpm -qa | grep XXX shows package XXX installed. I need to remove XXX from
the RPM database without making any other changes to the system. In other
words, I just want package XXX to stop from showing up in rpm -qa but I do
not want rpm to uninstall anything from the box. How can this be done?
Hello, again, everyone.
I'm trying to install RH 8.0 on a Compaq 1850R. The install locks up at:
Running anaconda, the RedHat Linux Installer
Probing for Video Card Type: ATI Rage
Probing for Monitor Type: Unable to probe
Now, I've done some searching and have tried to pass both 'skipddc'
- Original Message -
From: Mobeen Azhar [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, January 09, 2003 11:44 PM
Subject: RPM question
rpm -qa | grep XXX shows package XXX installed. I need to remove XXX from
the RPM database without making any other changes to the system.
On Thu, Jan 09, 2003 at 04:20:49PM -0600, Mike Vanecek wrote:
Spamassassin 2.43 uses perl-5.6.1 (RH 7.3). RH 7.1 uses perl-5.6.0.
Conquently, attempts to install on 7.1 result in an error:
[...]
It also needs html.pm.
[...]
Is there a way to just install the two missing .pm's? Would using
Can anyone point me in the right direction for some raid monitoring software
for RH8? Thanks!
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
make this change in your /etc/inittab
id:5:initdefault:
to
id:3:initdefault:
Shane
-Original Message-
From: Jianping Zhu [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 09, 2003 2:36 PM
To: [EMAIL PROTECTED]
Subject: how to start to text mode?
i have redaht 7.3. after i start
i have redaht 7.3. after i start my computer it will go gui mode. I prefer
it to go text mode after i start it.
what change should i made in order to acheave this goal?
thanks
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
Please be patient, as I am new to Linux.
Ok, I downloaded BIND 9.2.1, but when I try to install the rpm with the
following command:
rpm -ivh bind-9.2.1-1.7x.2.i386.rpm
It says it needs the following dependencies:
libdns.so.5
libisc.so.4
I looked both on the install cd's and the Redhat FTP
Thanks a bunch Anand Buddhdev, I will check that out.
--Moby
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On
Behalf Of Anand Buddhdev
Sent: Thursday, January 09, 2003 17:02
To: [EMAIL PROTECTED]
Subject: Re: RPM question
- Original Message -
From:
Thanks to all who responded and helped me.. All the tips worked and helped me
understand linux concepts...This mailing list is great...
Now I feel as if I'm mastering linux...Good to understand how things work..
Thx
Saravanan
Rigler, S C (Steve) [EMAIL PROTECTED] wrote:
If they are scsi
I. Previous condition (Red Hat 7.2)
The bootloader configuration contained an entry for an old kernel, one for
the current kernel, and yet another for WinXP.
Booting was done primarily with the WinXP boot loader. There I selected Red
Hat Linux, then I got the graphical LINUX boot screen where
On Thu, 2003-01-09 at 08:58, Emilio wrote:
1) The new desktop, that BlueSomething thing is the worst thing I ever
used, I
was so disenchanted with how the system has degraded that I am now using
Windows again after many years...
What part of the desktop, specifically, are you disappointed
On Thu, Jan 09, 2003 at 05:37:42PM -0500, Edward Marczak wrote:
Hello, again, everyone.
I'm trying to install RH 8.0 on a Compaq 1850R. The install locks up at:
Running anaconda, the RedHat Linux Installer
Probing for Video Card Type: ATI Rage
Probing for Monitor Type: Unable to
Well this is interesting as it is humorous.
My wife's system came down with a virus and I did a full wipe and
re-install. We are still using Win98 on the desktops since we are both avid
game players. I absolutely refuse to use Outlook in any form (I use
Eudora), and I have not used Infection
1 - 100 of 143 matches
Mail list logo