Mark Rogers wrote:
Win95 can dial into my machine great everything works, win3.x using
Trumpet winsock (any version), dials, gets authenticated, is assigned an
IP address and then no data gets over the line.
This happens regardless of any ppp settings I've tried or anything else
t is the bad
setting in winsock (they are the same as before)??
Please help. 2.2.0f was fine but couldn't do RAS, and 2.3.3-2 worked but
couldn't write to the log. So I NEED 2.3.3-4
begin: vcard
fn: Mark Rogers
n: Rogers;Mark
org:NRG
email;intern
).
--
Any ideas?
Does anyone out there have Winsock users dialing into pppd 2.3.3-4? If
so what are your config files.
Thanks.
begin: vcard
fn: Mark Rogers
n: Rogers;Mark
org:NRG
email;internet: [EMAIL PROTECTED]
title: Sys Admin
--
/etc/ppp/options
auth
login
modem
crtscts
lock
proxyarp
ms-dns xxx.xxx.xxx.xxx (our dns server of course).
--
Any ideas?
Thanks.
begin: vcard
fn: Mark Rogers
n: Rogers;Mark
org
I put
those perl books ;-)
Thanks.
begin: vcard
fn: Mark Rogers
n: Rogers;Mark
org:NRG
email;internet: [EMAIL PROTECTED]
title: Sys Admin / Network Manager / Dare Devil
note;quoted-printable:Our new motto: "You don't know how luck
it was at least 1.7.
The older versions can't handle the new glibc in RH5+
The homepage is very hard to find though. I can't find it? The only thing I
have is an email address from the documentation.
[EMAIL PROTECTED]
begin: vcard
fn: Mark Rogers
n: Rogers;Mark
know!
begin: vcard
fn: Mark Rogers
n: Rogers;Mark
org:NRG
email;internet: [EMAIL PROTECTED]
title: Sys Admin / Network Manager / Dare Devil
note: Our new motto: "You don't know how lucky you are!"
x-mozilla-cpt: ;0
x-mo
everybody, just because a company is big and has a
large IT presence doesn't mean you should assume they have their end worked
out!
Thanks for suggestions everyone.
begin: vcard
fn: Mark Rogers
n: Rogers;Mark
org:NRG
email;internet: [EMAIL PROTECTED
hat we had 2 netcards set to full duplex they
were collision storming, since fixing that I've only seen one blink from
the collision light. Don't think it has anything to do with the problem.
Thanks.
begin: vcard
fn: Mark Rogers
n: Rogers;Mark
org:
for months. And another machine that is configured exactly the same at 75Mhz
with 128Mb of ram in it (EDO) so I couldn't see that was the problem. But
Obviously it was. So all fixed now.
Ahh who cares anyway, now I run 100Mhz and all is sweet :)
begin: vcard
fn: Mark Rogers
n
used, 68380K free 47472Kfree
The top memory hog is named at 1.8%
What's the best way to look at memory usage, or is it time to go through
the "ps uaxw"?
Thanks.
begin: vcard
fn: Mark Rogers
n: Rogers;Mark
org:NRG
email;internet: [EMAIL
screen
that read :
kfree of non-kmalloced memory 068e8e98, next =068e order=2
Problem: Block on freelist at 06a2ce90 isn't free
..
..
etc,etc.
And I had a crash earlier today. And it was something about kmalloc.
Is my RAM bad?
begin: vcard
fn: Mark Rogers
n
Hi,
How do I get some useful info from the core dump file (core)??
E.g What program caused it?
Thanks.
begin: vcard
fn: Mark Rogers
n: Rogers;Mark
org:NRG
email;internet: [EMAIL PROTECTED]
title: Sys Admin / Network Manager / Dare Devil
Bertil Stenstrom wrote:
But I just can't find a complete reference on how I can configure this
beast. Can anyone please point me to something that explains the new
named.conf-file ??
I've really looked all over but can only find bind 4.9.X doc's.
The DNS howto at sunsite was updated last
don't have high traffic sites but 2 servers going non-stop for a
couple of months now and not a single issue.
I am new to Redhat and Apache. I want to switch from NT Server to Redhat
for websites.
Good move. ;-)
--
Mark Rogers
Howdy.
I'm trying to run apache_1.2.5 with SSLeay-0.8.0 and it compiles fine
but when I try to run it I get "No SSL certificate set"
I've run the make test certificate command and have it put in my conf
dir but it still won't run. What else do I need to do??
And where can I get a very
.
"eth0: Oversized Ethernet frame spanned multiple buffers, status 0667c858e!"
The message is spouted when ever some traffic starts flowing (like and FTP
download).
Wish I knew what was going on? Thought it was just me ;-)
--
M
**ked
router? ;-)
--
Mark Rogers
[EMAIL PROTECTED]
Northern Rivers Gateway
+61 (066) 216999
"It's cold outside, there's no kind of atmosphere" - RedDwarf
--
Steve "Stevers!" Coile wrote:
You're not making sense. You're connecting to port 8080 of your Web
server. What operating system is your Web server running? If not Red Hat
Linux, take your problem elsewhere. If Red Hat Linux, continue reading.
Ok, sorry, no it's not my web server
Ok, here we go. I'm getting this error message when using the network:
eth0: Oversized ethernet buffer detected in multiple frames
Umm, why? ;-)
--
Thanks.
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata
20 matches
Mail list logo