en
you need it, it doesn't have the mass to be that competitive in moderate to
heavy winds and ballasting doesn't improve it much.
Skip Miller can give you the real story as to where it best fits into your
arsenal.
Tom
T&G http://adesigner.com
32 Mount View Dr
Afton, VA 22920
phon
Don Richmond was: [EMAIL PROTECTED]
He was in VA Beach this week
From: "regis" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, July 07, 2003 10:43 PM
Subject: Re: [RCSE] New HLG
> If you put a tow hook on either one, and use an `upstart' that shoots
> it up about 100 ft. then you can
Yep, it looks like a quick launch and turnaround contest. I think I have
seen them miss once or twice in the last couple of years : )
T
- Original Message -
From: "Steve Meyer" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, July 08, 2003 3:10 PM
Subject: Re: [RCSE] Nats HL Tas
.
Urban myth or not, I'll not use a single-conversion RX
in anything but park foam ever again.
Tom
--- "R. Tyson" <[EMAIL PROTECTED]> wrote:
> On Sat, Jun 28, 2003 at 07:14:41PM +, R. Tyson
> wrote:
> A double conversion receiver will work with the
> aerial w
xibility.
With the Pro+ and a Dymond Super Turbo in my flight
bag, I'm covered for just about anything.
Tom
--- Bill Swingle <[EMAIL PROTECTED]> wrote:
>
> > >>But wouldn't it be easier to just plug it in
> once and forget
> > >>about it? Especial
s to see if they had damaged
anything when opening up the Sportube, as would have been the case before the
addition of my internal carrier. A quick inspection showed everything to be just fine.
Thus far, I haven't found the need to blatantly misrepresent the contents of the
Sportube.
Never a problem here, on four different TD planes so far. You running them
at 6 volts?
Tom
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, June 12, 2003 1:27 PM
Subject: [RCSE] DS368 Servo Question
I have had 3 JR DS368s fail in flight. 2 were
I have one new Stylus TX only for $339
and an adapter and Spectra Module for $145
Tom
T&G http://adesigner.com
32 Mount View Dr
Afton, VA 22920
phone 540 943-3356
fax 540 943-4178
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe&
some
solder joints. Less than $40.
I was very happy with the service. They were very prompt to respond to my
phone query and update me on the status. Considering this is a busy time, I
thought the service was very fast.
Be patient.
Tom
-Original Message-
From: Brian Smith [mailto
I use and sell spring holders for the Stylus and have never had a problem.
I have 1800 and 2000 mah cells in them. (I see little or no difference in
the 2000 cells as far as flight time goes). I have changed packs while in
the air. Just make sure you set up your plane mechanically zero (radio
ce
downwind runs. So, if you haven't had a
chance to participate, mark your calendars now. It is always the first
full weekend in June.
The scores are listed below. The full scores by round will be posted on
the TPG web site www.torreypinesgulls.org soon.
Tom Clarkson
TPG Handlaunch Coordi
I don't think the Sirius Super Test cares (or can even know, for that
matter) whether a pack is NiCD or NiMH...as long as it's 4, 5 or 8 cells it
should work fine. Maybe a diode issue with a particular pack prevents it
from discharging through the tester?
Tom
- Original Message
Hey Tom,
> I have a Sirius tester and it won't work with my 1100mah
> nicad TX packs, but it will do the 700's, what's up with that?
> It will do my 1500mak RX packs though.
> Thanks,
> Dave
>
Dave,
I have no idea. Even though I have used a lot of different c
Stick an EDF inside each tip!
Tom
--- Jon Stone <[EMAIL PROTECTED]> wrote:
> Check out these wingtips...
>
> http://www2.jonction.net/~icare/moebius.htm
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to
http://www.demandproducts.com
Make 1/2 scale foam planes... maybe
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and
unsubscribe messages must be sent in text only format with MIME turned off.
Any web-accessible videos of this stuff around?
Tom
- Original Message -
From: "Steve Meyer" <[EMAIL PROTECTED]>
To: "Jim Bacus" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, March 19, 2003 8:54 PM
Subject: Re: [RCSE] F3J vs F3B load
;TH-STK HIGH!" alarm ;-)
Let me know what you find.
Stylus Boy,
Tom Hoopes - ([EMAIL PROTECTED])
-- Hoopes
Designs -
"Taking the hassle out of wing wiring harnesses"
is an amazing plane. Cost $1500 to make ready to fly. $1200.
Will include xtal - just let me know your frequency. Program for Stylus
available.
If interested I can send pictures.
Tom
T&G http://adesigner.com
32 Mount View Dr
Afton, VA 22920
phone 540 943-3356
fax 540 943-
1/6" to 1/2"+ blades. The table saw is okay if you don't use it all the
time. Then a nice big freestanding one would be better. It's fine for
model work. Combine it with a Smithy and you've got everything you need.
Tom
T&G http://adesigner.com
32 Mount View Dr
A
Dan,
Check out Radical R/C at:
http://radicalrc.secure-mall.com/shop/index.php?shop=1&cat=56&cart=29564
They list 6 pin deans, they did at one time offer 8
pin plugs...
Aloha,
Tom Nakagawa
__
Do you Yahoo!?
Yahoo! Tax Center
Skip,
I stock the Graupner / Multiplex 6 pin plugs
Tom
T&G http://adesigner.com/hobbies
32 Mount View Dr
Afton, VA 22920
phone 540 943-3356
fax 540 943-4178
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED] ; [EMAIL PROTECTED]
Sent: Thursday, March 06, 20
NIB Maple Leaf Designs Mirage HLG ('Platinum' version). Poly wing, T-tail,
pod/boom fuse. Last iteration of the non-DLG planes. Untouched except to
look at and drool on (Maple Leaf's stuff is absolute artwork).
$275 shipped to ConUS. Funding another project.
Tom
RCSE-
Send an email to Steve. He's sure the ATF will be invading his house. This
is how the rumor got started.
- Original Message -
From: "Steve-Teachers Discount Music" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, March 03, 2003 10:21 PM
Subject: [BRASS] Our hobby is in danger...
r balloons, etc. The all can carry bombs.
Tom
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and
unsubscribe messages must be sent in text only format with MIME turned off.
beautiful $1000
molded ship into a pile of rubble that couldn't even be identified
by dental records. Enron accountants would have been proud of my
accomplishments. Please learn from my mistakes.
Tom Siler
Columbus, OH
RCSE-List facilities provided by Model Airplane News. Send "sub
Jim,
I am waiting to get the first production 3 meter one from Mike Bailey
www.midwestslope.com
Tom
T&G
32 Mount View Dr
Afton, VA 22920
phone 540 943-3356
fax 540 943-4178
- Original Message -
From: "Jim Beem" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent:
Office Depot, Staples, etc.
Tom
- Original Message -
From: "Frank Slaughter" <[EMAIL PROTECTED]>
To: "Tom Watson" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Monday, January 27, 2003 7:39 PM
Subject: RE: [RCSE] Old "new way" to ho
I'll second the PostIt stick method. Been using that on my NYX for several
months now and the best part is that you don't apply it every time. I've
applied it only twice since about September.
Tom
- Original Message -
From: "Dick Williamson" <[EMAIL PROTE
I personally am a skegnostic, and don't much care if people in contests
use skegs or not, because I am not going to be flying against them anyway.
I use one on the Flamingoid to keep the droopy plastic yard flamingo neck
from breaking.
What I want to know in this survey is: HOW MANY DIFFE
We've used Optimas for awhile now.
http://www.adesigner.com/hobbies/optima.htm
The charge really well and seem to last longer than any of the other deep
cycle batteries we've tried.
The Wal-Mart warrantee is prorated and they check the battery for you. To
make sure it is really dead. I usually
At 08:39 AM 1/22/03 -0800, John Erickson wrote:
>Y C,
>
>Many have used the Hoopes wing connectors with great success. They don't
>have ferrite beads but the leads are twisted all the way out.
>
>Never had any glitching problems. Tom Hoopes is a great guy to work with
Bring on F3B!!
Tom
- Original Message -
From: "Pat McCleave" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, January 20, 2003 9:34 AM
Subject: [RCSE] Skegs and Related Rules
> PS, If we would just all wake up start flying more F3X type events we
finally posting this.
T
A Hitec and previous Multiplex dealer.
- Original Message -
From: "Glen Merritt" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, January 15, 2003 12:15 AM
Subject: Re: [RCSE] Multiplex Cockpit Development
>
> Hello Tom,
&
won't lift the
paint.
Tom
--- Original Message ---
From: "yclui_hk <[EMAIL PROTECTED]>"
<[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: [RCSE] Fixing wing servo covers
>Are there any neat ways to fix wing servo covers to
all-mould wings ?
RCSE-List faci
ONLY FOR STATIC EXHIBITION.
That's no fun
T
> Don't understand why apple mail breaks the link like that, here it is
again.
>
> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=419&item=2153209735
>
>
> Jim
> Downers Grove, IL
> Member of the Chicago SOAR club, AMA 592537LSF 756
l be so glad to finally get it
that you won't notice an anvil has been dropped on the
exact center of the box).
[rant mode = off]
Tom
--- Original Message ---
From: "Randy Bullard" <[EMAIL PROTECTED]>
To: "RCSE" <[EMAIL PROTECTED]>
Subject: [RCSE] Fed-X,USPS,UPS
I have a new Spectra module for the Vision radio. Dial in any frequency.
Ordered for someone who upgraded to the Stylus. Great when you don't want a
conflict. I use one in my Stylus also. Hitec warns it is only for their
radios, but.
List is $195. Will sell the set for $130.
Tom
I have one of these and I really like it. Great for one person
launch/retrieve.
What is your reserve on the retriever? I always wonder why one doesn't just
set the starting bid at their minimum.
T
- Original Message -
From: Ed Berris
To: [EMAIL PROTECTED]
Sent: Friday, January 10, 2003
This is a $200 7 channel radio, not the MPX 4000 :-)
There are a few things that would be nice if it had.
For another $4 chip they could have names in the model memory instead of
numbers. With a little programming they could have crow and proper
elevator/flap comp.
T
-
From: "Bill Conkling"
Most probably already know about it...
http://www.slopeflyer.com/artman/publish/article_185.shtml
T
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and
unsubscribe messages must be sent in
uot;one design" LMR or 609
battery slot competition.
Tom Hoopes - ([EMAIL PROTECTED])
-- Hoopes Designs -
"Taking the hassle out of wing wiring harnesses"
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe"
Aloha,
My buddy is looking for a Charlie Richardson's
wooden Climax kit, NIB. Please look through your
accumulation of unbuilt planes and see if you have
one, email me.
Mahalo,
Tom Nakagawa
__
Do you Yahoo!?
Yahoo! Mail Plus - Pow
Gordy would say go BLUE.
T
- Original Message -
From: "Nathan Woods" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Monday, December 30, 2002 9:08 AM
Subject: [RCSE] RE: Wing Servos
> Well, the following servos are all pretty good if money is the deciding
> fa
I guess TC doesn't know that it is illegal to charge a credit card until an
item is actually ready to ship.
Also, it is required by law that the customer be notified and allowed to
cancel any order that is back ordered for more than 30 days.
Tom
Subject: [RCSE] Beware when ordering from So
only 2 hours left
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=34056&item=1923363591&rd=1
It is going and almost gone.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=34056&item=1923363591&rd=1
Tom
Sounds like it's time for a stakeout...surely with a track record like that,
the police could be convinced to watch a vehicle in the parking lot stocked
with bait.
Tom
- Original Message -
From: GHANSON
To: soaring BBS
Sent: Sunday, December 08, 2002 5:41 PM
Subject: [RCSE] hotel
Okay here's the breakdown
http://www.airtronics.net/2002_Page01.htm
Stylus radio: (629.95) $350
Glider card: (199.95)
$75
Memory card: ($149)
$50
Rubberduck: ($25)
Free
Shipping/ins: $9.65
This is a very nice radio!
Tom
tails and sizing of
the pitcherons...
Any suggestions? It's going to be a fun ship for lighter days at the
small hill we have here... trying RDS out too. Pink foam with a
carbon uni dart under 1/16 balsa. Estimated wt around 14 ounces.
Thanks in advance for advice good or bad.
Tom
s or make up ballast
slugs for the fuse.
Good luck with whatever you choose.
Tom Siler
Columbus, OH
--- In [EMAIL PROTECTED], "Robert P. Buxton" <[EMAIL PROTECTED]> wrote:
> I recall, back in the 80's when the Sagitta first came out that
there were
> several mod
Does that mean 2 days of Scale and no cross
country, F3B or F3J?
Folks,I just checked the AMA site, and they had
the Soaring NATS 2003 schedule up: july 19-26.here's the
url:http://216.37.26.54/comp/Site%20Schedule/wc072003.htmDana
Too late Les Grammer got the
stuff
I put his email on the link if you want to get some
of it from him.
T
T&G 32 Mount View DrAfton, VA 22920540
943-3356fax/ 943-4178
- Original Message -
From:
George Voss
To: Tom Broeski
Sent: Wednesday, November 06, 2002
Many of the servos are gone.
MX 50 are gone
check the link again if I did not email you that
you got em.
http://adesigner.com/brass/servosale.htm
T
T&G 32 Mount View DrAfton, VA
22920540 943-3356fax/ 943-4178
k the date of manufacture.
Tom
T&G 32 Mount View DrAfton, VA 22920540
943-3356fax/ 943-4178
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, November 01, 2002 11:53
AM
Subject: Re: [RCSE] Alternative to 3M
77
In a message da
I have to agree with you.
Tom
>
> I thought I'd let you know that McCormick's gives great service. I
placed
> a small web order and 2 days later it was on my door step.
> Best selection of colors and styles I've seen anywhere.
> http://www.mccormicksnet.com/se
or 4 more winches.
Keep it up,
Tom Copp
Composite Specialties
www.f3x.com
949-645-7032
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and
unsubscribe messages must be sent
and I will include the xtal. Stylus programming
available.
Tom
P.S. Jim Bacus has a good write up on the Stork here:
http://www.jimbacus.net/soaring/stork.html
T&G
32 Mount View Dr
Afton, VA 22920
540 943-3356
fax/ 943-4178
RCSE-List facilities provided by Model Airplane News. Send &
I have to agree with Don Stackhouse--the answer is not to ban park flyers,
but to bring those folks into our clubs. We used the safety and
interference argument here in Columbus to get the City to allow us to fly
electrics at our sailplane field. (We had previously been banned from
flying anythi
will fly 5 rounds to make it worth the drive for those coming from the LA
area.
First heat will be flown at 9am. Registration closes at 8:45.
Look forward to seeing you there. As always, beginners are welcome and
encouraged. We will help you.
Tom Clarkson
TPG HL Coordinator
RCSE-List facilities
em.
Now if there were as many R/C radios as there are cell phones, we would be in
businessscale of economies.
Tom Hoopes ([EMAIL PROTECTED])
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
I have an electronic dual battery switch with LED
indicating when second pack is in use. This switches to second pack when
first pack reaches minimal operating voltage. +- 5/8" x 5/8" x
1.5"
Tom
T&G 32 Mount View DrAfton, VA
22920540 943-3356fax/ 943-4178
ce four days a week, ignore your family, quit your job,
and maybe in a couple of years you can finish second instead. Then
if you still aren't happy, try golf, I hear it's easier to master.
PRIORITIES... Priorities... priorities... back to work to pay for my
toys.
Later!
Tom Siler
C
grabbing the servo with pliers and twisting, but all
that got me was destroyed servo cases and they still wouldn't come out.
Tom
- Original Message -
From: "billyb2u2000" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, October 13, 2002 7:43 PM
Subject
heck my scores even though I
have a great deal of confidence in technology.
As long as people are involved in any process, problems will occur, that's human
nature. I think that CVRC does a great job and showed their mettle when the "crap hit
the fan". Don't forget that we,
Dear Ed and RCSE gurus:
Could the weak or dying lithium battery
syndrome cause centering problems on other radios too? Once in a
while my JR 783 does odd things about centering control surfaces.
- Original Message -
From:
Ed Franz
To: [EMAIL PROTECTED]
Sent: S
One exception to this might be an optional factory antenna. Though not
truly a 'duck' appearance-wise (it's a bit longer) I have used the JR
factory base-loaded antenna to take my TD ships to near-stupid
heights/range, with never a problem.
Your mileage will vary.
Tom
- O
Hi All,
Has anyone had ANY problems running JR-341's on 5 cells (6V)?
I've never used 341's on any more than 4 cells and don't have time to test. Thanks!
Tom Hoopes ([EMAIL PROTECTED])
RCSE-List facilities provided by Model Airplane News. Send "subscribe"
ure I would appreciate
it.
>
>Thanks again,
>
>
>-Craig Coles
> IMSF Webmaster
Craig,
I looked at the sponsor list and it looks like Dave Sanders (Dave's Aircraft
Works) didn't make it on the list.
Tom Hoopes ([EMAIL PROTECTED])
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
DECEMBER OR
JANUARY PRIOR TO MY SONS DEATH IN MARCH HE, AARON, SOLD HIS STORK ON E-BAY TO
SOMEONE I BELIEVE IN YOUR AREA. I DON'T KNOW THE GENTLEMAN'S NAME THAT BOUGHT IT
BUT I KNOW THAT HE MET US IN MARYLAND TO PICK IT UP. THE SHIP IS WHITE WITH SOME
SHADE OF PINK ON THE BOTTOM OF WINGS AND
The EDSF SC2 is also this Sunday, which could result in sparse attendance at
PSS even if it is held...
Tom
- Original Message -
From: "Visalia Bound" <[EMAIL PROTECTED]>
To: "Nowell" <[EMAIL PROTECTED]>; "RCSE" <[EMAIL PROTECTED]>
Sent: W
l go out tomorrow. I should be
able to forward the 6 servo wing setup to you tomorrow as well.
Tom Hoopes - ([EMAIL PROTECTED])
-- Hoopes Designs -
"Taking the hassle out of wing wiring harnesses"
RCSE-List facilities provided by Model Airplane News. Send &q
Gone to Randy
McCleave
In case anyone wants to offer him a higher price
for it.
Tom
New Organic 2M for sale.
I was going to build it myself, but it doesn't look
like I will ever get around to it.
Reg
$495 $475 with
the aileron wire leads done.
Tom
T&G 32 Mount View DrAfton, VA
22920540 943-3356fax/ 943-4178
I have the battery checkers on sale for $15.50 reg $17.95
details here:
http://www.maxxprod.com/mpi-6.htm
T&G Hobbies
http://adesigner.com/hobbies
32 Mount View Dr
Afton, VA 22920
540 943-3356
fax/ 943-4178
>
> >Dave,
> >
> >I have a 4 cell 1650 NiMH rec. pak in my Sharon. with six Multiple
wrh.noaa.gov/Saltlake/UofU/UofU.FPK.html>http://www.wrh.noaa.go
v/Saltlake/UofU/UofU.FPK.html
Tom Hoopes - [EMAIL PROTECTED]
CD - Soar Utah 2002
Aug.30 - Sep.2, 2002
http://www.silentflyer.org
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
be 0.557M. If anyone has one of
these and can measure, that would also be appreciated.
I know that I can always start
with the most conservative answer and work from there, but the engineer in me
needs a more exact basis for my calculations.
Tom KoszutaClarence Sailplane
Society(Buffalo) NY
anks of
modelers who can keep a silent plane in the air without a motor.
Good luck in your adventures. You WILL have fun flying little planes.
You have no choice in that.
Tom Koszuta
Clarence Sailplane Society
(Buffalo) NY
- Original Message -
From: "Will Kessler" <[EMA
wer from the receiver battery, adding the vario, with the exception
of the TE probe is a no brainer.
For those thinking that this "hardware" is flying the plane or directs you
where to fly the plane, it doesn't. It simply and accurately records your
flight for la
rvo programmer won't work with the old MC/V2's,
so make sure that you get the correct programmer for the intended servos ;-)
Other programmers will not work.
Tom Hoopes - ([EMAIL PROTECTED])
-- Hoopes Designs -
"Taking the hassle out of wing wiring harnesses"
I have (3) Vision 50 MHz PCM receivers + xtals and
a Vision Module
The receivers are basically unused standard
PCM Airtronics.
List for everything would be $649.80
Will sell all (4) items for $250.
Tom
T&G 32 Mount View DrAfton, VA
22920540 943-3356fax/ 943-4178
I saw an Icon at a recent club contest get its nose stuck in hard and fast
(and I mean 'cringe-like-you've-been-kicked-in-the-pins' hard) from about 2
feet up repeatedly with no apparent damage.
Tom
- Original Message -
From: "James V. Bacus" <[EMAIL PROTE
Ow...
Tom
- Original Message -
From: "James V. Bacus" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, August 09, 2002 6:27 PM
Subject: [RCSE] Another WC picture
> http://www.pbase.com/image/3721191
RCSE-List facilities provided by Model Airpla
I wonder if there's not an error in the channel
assignment diagrams for the 8103. I would think that
a manufacturer would keep channel assignments
consistent across much (if not all) of their product
line...but certainly among their top two or three
products.
Yet, when I switched to the J
I am importing these from Roman, I expect a delivery with the next
batch.
Tom Copp
Composite Specialties
www.f3x.com
949-645-7032
-Original Message-
From: Bill Johns [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 25, 2002 8:27 AM
To: [EMAIL PROTECTED]
Subject: [RCSE] I'm afra
I missed the last one. Anybody have one they
would sell
Tom
Tom Copp would like to recall the message, "[RCSE] F3xTD again at HSS.".
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
ine out of the
next pilots way so you need to wait for the retriever to tighten the line
before the next pilot can launch. Worse in a cross wind.
At HSS we will put some of these suggestion into play so if your July 7th
Sunday is open come on out.
Tom Copp
COMPOSITE SPECIALTIES
www.f3x.com
94
What is it with the old messages? Seems to be getting worse.
Tom
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
Up for flaps/spoilers retracted...this correlates to power RC (up=throttle
open or go, down =throttle closed or stop). This would also minimize
problems if you fly someone else's plane.
Tom
- Original Message -
From: "Jeff Nibler" <[EMAIL PROTECTED]>
To: <
unch of
footage. Including me stuffing my Acacia at base B. ouch!
Well maybe that won't make the video..
Also while I am promoting other peoples stuff go get the VR98 video from
Paul. He had them on sale and it is the BEST I have seen at showing what we
do in F3F.
Tom Copp
C
We had a big turnout at the MOSS field this afternoon, old stalwlarts,
lost souls returning, new faces, kids, flying everything from free flight
to DLG to high tech unlimited to electric park flyers.
So here's three things I learned at the field today:
1. If your stick isn't
use we had them already. I will
make the special tape for the next contest.
The next F3XTD contest is the first Sunday next month at HSS field in Costa
Mesa, CA. Come on out. We will set the field for 7 winches next time. (The
club is re conditioning a few extra winches for next month.)
Tom Copp
The complete scores have now been posted on the Torrey Pines Gulls Web Site
www.torreypinesgulls.org
Tom Clarkson
TPG Handlaunch Coordinator
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
So, Gordy's shins are skegs?
- Original Message -
From: "Bill Swingle" <[EMAIL PROTECTED]>
To: "RCSE Soaring (E-mail)" <[EMAIL PROTECTED]>
Sent: Tuesday, May 14, 2002 3:43 PM
Subject: RE: [RCSE] What is not a Skeg; DEFINED
> Ack, another "rules" thread! Geez.
>
> The decision is simply
Ah yes...they are usually here (SoCal) across Memorial weekend. The sound
is just too cool.
Tom
- Original Message -
From: "Charles Eaton" <[EMAIL PROTECTED]>
To: "Joe G" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sen
ROTECTED]>; <[EMAIL PROTECTED]>
Sent: Friday, May 03, 2002 1:05 PM
Subject: Re: [RCSE] Digital HS 5125 servos FS
> Oh thats nice. lets see 111 for a hitec servo, or 65 bucks for a JR servo.
> My pocket can hardly afford the JR's
> what next a servo for 200 bucks?
> Mark
>
d.com/Newproducts/5125.htm
Anyone interested email me off list.
Tom
ward after you build some tension.
I think most of your problem would be solved with a bit of down elevator.
If you don't have elevator trim in launch mode, then use your slider to put
it in. You can always slide it back to neutral after zoom.
Tom
>
> class TD ship (no names as it has
I have two Stylus batteries for sale:
(1) Stock 95050 (cost $69)
(1) 1500 mAh in Stock 95050 case (cost
$84)
These are a couple years old, but have been cycled
and are at max and in great condition.
Total for both $80 + shipping
Tom
T&G 32 Mount View DrAfton, VA
22920540
Bandit's are back in production and the Bandit-E instruction sheet is
included to make it SP400 powered.
Tom Copp
COMPOSITE SPECIALTIES
www.F3X.com
ph/fax 949-645 7032
-Original Message-
From: Brian Joder - OUTBOUND Ind. [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, April 16, 2002 12:
601 - 700 of 1092 matches
Mail list logo
