Re: [WISPA] OT: New Tax Recordkeeping Rules Will Cost SmallBusinesses

Let's hope it turns out to be nothing. Would be burdensome. For some more than others. - Original Message - From: "MDK" To: "WISPA General List" Sent: Wednesday, August 04, 2010 10:56 AM Subject: Re: [WISPA] OT: New Tax Recordkeeping Rules Will Cost SmallBusinesses > That came to

Re: [WISPA] Ubiquiti Link - Poor Performance

Did ack timing get off somehow? - Original Message - From: "KosiNet Wireless" To: "WISPA General List" Sent: Thursday, August 05, 2010 4:33 PM Subject: Re: [WISPA] Ubiquiti Link - Poor Performance > Rick, > > I hate to ask what my be obvious Are you running through a switch? > Co

Re: [WISPA] computer won't connect to radio

Crossover issue? We had a new installer come across this the other day. - Original Message - From: "Terry Hickey" To: "WISPA General List" Sent: Friday, August 06, 2010 9:56 AM Subject: Re: [WISPA] computer won't connect to radio >I have had Tranzeo radios go fubar so they only will

Re: [WISPA] Ubiquiti Link - Poor Performance

How about insufficient power to the radio? - Original Message - From: Mike To: 'WISPA General List' Sent: Friday, August 06, 2010 11:47 AM Subject: Re: [WISPA] Ubiquiti Link - Poor Performance Is one end lower than the other? If so, there could be a duct that is steering

Re: [WISPA] UBNT thoughts

Where we have seen a difference in value of equipment is in the failure/repair rate. Ours is horrible. The success or failure of build-em-yourself radios depends GREATLY on the quality of the install/installer (we have alot of StarOS, alot of weatherproofing tape, alot of pigtails, alot of jum

Re: [WISPA] RB1100

What kind of throughput are you getting, both in traffic and in PPS? - Original Message - From: Kurt Fankhauser To: 'WISPA General List' Sent: Tuesday, August 10, 2010 11:38 AM Subject: Re: [WISPA] RB1100 Running a RB1000 here for core router over a year without single hicc

[WISPA] OS Humor

http://www.google.com/buzz/thastoner/T8pswjDZNmW/How-Fanboys-See-Operating-Systems hehe WISPA Wants You! Join today! http://signup.wispa.org/ -

Re: [WISPA] Mikrotik OSPF Problem

Butch - your post was fine except for the first sentence. No need to pick at wounds at this point. Let it go. Matt Larsen vistabeam.com On 8/15/2010 5:49 PM, Butch Evans wrote: > On Sat, 2010-08-14 at 17:15 -0400, Scott Reed wrote: >> I have an RB433AH running ROS3.30. It has been runnin

Re: [WISPA] Major Disaster

bridge loop? arp storm? That's an awful lot of clients on that one AP. If all your CPEs are in bridge mode you could have alot of customer routers creating an arp storm for you. - Original Message - From: Ryan Spott To: WISPA General List Sent: Wednesday, August 18, 2010 8:22

Re: [WISPA] Major Disaster

If you have 50 clients on 5MHz you need to change IMO. - Original Message - From: "~NGL~" To: "WISPA General List" Sent: Wednesday, August 18, 2010 8:48 AM Subject: Re: [WISPA] Major Disaster > Quarter 5 MHZ > 908/5 MHZ > > -- > From: "L

Re: [WISPA] Backend systems

Just a quick point here, because this is a key element for WISP operators Mike, if you are too poor to pay the $2000 or devote the time to setup a billing system then you should seriously question whether you should be in this business at all. Once the initial network deployment is compl

Re: [WISPA] Backend systems

less Express > P.O. Box 255 > Toledo, IA 52342 > 239.770.6203 > m...@aweiowa.com > > > -Original Message- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Matt Larsen - Lists > Sent: Sunday, August 22, 2010 12:12 PM > To: wi

Re: [WISPA] Backend systems

This may be getting a little off-topic, but this is a benefit of back-end systems: We have tiered service levels...the more you pay the faster you go. We have bandwidth caps (FAPs)...the higher level tiered service you pay for, the higher your FAP limit is so you can download more. About this

Re: [WISPA] Backend systems

Hello Mark, It is fairly easy to come up with a Perl script that outputs all of the customer radios into a text file that you can then parse and put into Nagios. We do that with Xymon for all of our customer devices, and it works very well.You can also come up with a pgsql request comin

[WISPA] Good Source for Rackmount Servers?

I have a need for about ten 2U/4U rackmount servers.All will be running Linux, so 4gig RAM, 2ghz or better CPU and ATA drives are preferred. Does anyone one the list have recommendations? Matt Larsen vistabeam.com ---

Re: [WISPA] Good Source for Rackmount Servers?

*Subject:* Re: [WISPA] Good Source for Rackmount Servers? On 24 August 2010 02:15, Matt Larsen - Lists <mailto:li...@manageisp.com>> wrote: I have a need for about ten 2U/4U rackmount servers.All will be running Linux, so 4gig RAM, 2ghz or better CPU and ATA drives ar

[WISPA] FTTH Show

Anyone here going to this show? http://www.ftthconference.com/FTTH10/public/enter.aspx Still deciding whether I should go or not. Matt Larsen vistabeam.com WISPA Wants You! Join today! http://signup.wispa.org/

Re: [WISPA] Close range radio recommendation

I just learned that with new firmware, UBNT just added support for multiple IP addresses on an interface. We were wanting that alot... - Original Message - From: RickG To: WISPA General List Sent: Monday, August 30, 2010 9:47 AM Subject: Re: [WISPA] Close range radio recommen

Re: [WISPA] netflix/hulu IP's

You need it if you have your own IP space, for BGP. If you don't "own" your OWN public IPs, then you don't have one. - Original Message - From: Kurt Fankhauser To: 'WISPA General List' Sent: Monday, August 30, 2010 10:15 AM Subject: Re: [WISPA] netflix/hulu IP's Interesti

Re: [WISPA] Close range radio recommendation

You could put 100' of cheap RG58 cable between the radio and the antenna... at 5800MHz gives you something like 31dB loss... - Original Message - From: Jason Hensley To: 'WISPA General List' Sent: Monday, August 30, 2010 10:38 AM Subject: Re: [WISPA] Close range radio recommen

Re: [WISPA] Funny Website Error

OH NO! https://foxnews.com Who are we doing to trust now??? :^) Matt Larsen mlar...@vistabeam.com On 8/30/2010 10:44 AM, Bob Moldashel wrote: > Yeah. And don't fear. The Cyber Security Agency is going to keep the > world safe.. > > Too Funny > > -B- > > > > Greg Ihnen wrote: >> Th

Re: [WISPA] (DIRECTLY) Connecting two wireless with a RF cable

arcnet, dude... - Original Message - From: "Leon D. Zetekoff" To: Sent: Monday, August 30, 2010 4:27 PM Subject: Re: [WISPA] (DIRECTLY) Connecting two wireless with a RF cable > On 08/30/2010 06:39 PM, Paolo Di Francesco wrote: >> well, just using the usual things for non usual situa

Re: [WISPA] [WISPA Members] FCC Form 477 Due Sept. 1st **OFFLIST**

We are using Powercode... - Original Message - From: "Josh Luthman" To: Cc: "WISPA General List" Sent: Tuesday, August 31, 2010 9:32 AM Subject: Re: [WISPA Members] FCC Form 477 Due Sept. 1st If anyone using Powercode has yet to do this or is working on this today let me know. I hav

Re: [WISPA] Tranzeo lockups

If you are using Tranzeo TR5a, 49a or AP6000 series radios running in PtP mode on an all bridged network, they will lock up. Newer firmware helps, but does not completely resolve this problem. I ran in to this very problem recently while troubleshooting a client's network. It may not be t

[WISPA] Katrina, Five Years Later

(from my blog, WirelessCowboys.com) It is now 5 years since Katrina hit New Orleans and changed the face of the Gulf Coast forever. One of the good things that came out of this disaster was the outstanding effort by wireless ISPs that came together to provide Internet and phone services to

Re: [WISPA] UPS with IP

We are doing this with our old CB3 and RB110 boards. I am actually turning on the 2.4ghz AP mode, so that our techs can get online through them without having to plug into the network. All of our APs are switching to 10mhz channels and the laptops can't just hop on them anymore! Matt Lars

[WISPA] RIP vs other routing protocols

We ran into a problem yesterday that caused a large problem, and I'm now quite sure that it was assessed properly, as our network engineer blamed it on RIP not working properly and made the decision to implement BGP for routing at this site. Everywhere else, we're using RIP. Essentially, we ha

Re: [WISPA] RIP vs other routing protocols

, Sep 2, 2010 at 10:07 AM, Mark Nash - Lists wrote: > We ran into a problem yesterday that caused a large problem, and I'm > now quite sure that it was assessed properly, as our network engineer > blamed it on RIP not working properly and made the decision to > implement BGP fo

Re: [WISPA] RIP vs other routing protocols

ally* have routing loops. - Original Message - From: Jeremy Parr To: WISPA General List Sent: Thursday, September 02, 2010 1:09 PM Subject: Re: [WISPA] RIP vs other routing protocols On 2 September 2010 14:25, Jeff Broadwick - Lists wrote: Agreed...there are some old ro

Re: [WISPA] RIP vs other routing protocols

g protocols On Sep 2, 2010, at 10:16 PM, Mark Nash - Lists wrote: I appreciate advice in many cases, but for this one, I have only heard one answer to the question... That is: Is RIP stable? That person that answered said "Yes&quo

Re: [WISPA] RIP vs other routing protocols

nt to know if this RIP "problem" is smoke & mirrors masking an ACTUAL problem. - Original Message - From: Jeremy Parr To: WISPA General List Sent: Thursday, September 02, 2010 1:59 PM Subject: Re: [WISPA] RIP vs other routing protocols On 2 September 2010 16:

Re: [WISPA] RIP vs other routing protocols

t was fun. Good stuff for a laugh and a nod for those who "understand" us older guys and our older protocols. - Original Message - From: Mark Nash - Lists To: WISPA General List Sent: Thursday, September 02, 2010 2:07 PM Subject: Re: [WISPA] RIP vs other routing protoc

Re: [WISPA] RIP vs other routing protocols

RIP vs other routing protocols > On Thu, 2010-09-02 at 13:16 -0700, Mark Nash - Lists wrote: >> I appreciate advice in many cases, but for this one, I have only heard >> one answer to the question... That is: Is RIP stable? That person >> that answered said "Yes"

Re: [WISPA] Tower Climb video

Tower Climb videoYeah "Oh but clipping & unclipping makes me tiirred." (my best whiny voice via email). How about being dead? I don't care WHAT OSHA "allows". I don't trust ANYONE's hand not to slip. Even though OSHA may say it's OK, how irresponsible of them to put this video

Re: [WISPA] TV Whitespace Comment Deadline Sept 16th. All WISPsfile immediately.

As will we... - Original Message - From: Jeremie Chism To: WISPA General List Sent: Wednesday, September 15, 2010 9:11 AM Subject: Re: [WISPA] TV Whitespace Comment Deadline Sept 16th. All WISPsfile immediately. Will make time today. Sent from my iPhone On Sep 15, 2

Re: [WISPA] Breezecom PRO.11 Configuration Utility

Didn't know they had a utility. Just connected serially through a terminal emulator like HyperTerminal with one of those special cables... If it's BreezeNET then you may not have telnet access to them. But you should be able to serial into them... - Original Message - From: "Bob Mold

Re: [WISPA] I'm pulling Mikrotik

There's something to be said for "losing faith" in a technology. For me, it's the "build-it-yourself" radios. All of them. Mikrotik & StarOS. For me, I see such a high service call rate for repairs, the need to put in redundant backhauls sooner than later because we can almost guarantee som

Re: [WISPA] I'm pulling Mikrotik

Vyatta has a cool product line. Their open source version is free. They have a paid product that is much more full-featured. They make most of their money from their support contracts. Jeff ImageStream -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.

Re: [WISPA] Equipment - Tranzeo/Ubiquiti

I'm interested in all of these units. Let me know how many of each and how much you want. I'd be willing to take the whole thing. I have 400 subs left to switch to newer CPE that will do 10mhz channels, so I'll take all I can get. Thanks, Matt Larsen mlar...@vistabeam.com On 9/24/2010

Re: [WISPA] Looking for Bandwidth Manager

"No Bandwidth Management for you.2 weeks!" _ From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Travis Johnson Sent: Friday, October 15, 2010 12:47 PM To: WISPA General List Subject: Re: [WISPA] Looking for Bandwidth Manager Run... run far far away.

Re: [WISPA] Hacking Tranzeo

I would LOVE to see a Tranzeo that talked Nstreme. I am willing to donate a couple of CPQs to anyone who wants to take a shot at it. Also, anyone who has used ones they want to sell, hit me offlist. I still have another 200 or so CPE/CPE80 radios that I need to replace with CPQs or UBNT.

[WISPA] TTY Spam/Stolen Credit Card Scam against ISPs

There is a new spam scam targeted at ISPs going around. Someone uses the TTY system for hearing impaired people (or a forgery of it) to order up a dialup account and several email addresses.Then the account is paid for with a credit card.Within a couple of hours, spam starts flowing f

Re: [WISPA] Copper GigE Distance

The particular hardware you are using REALLY matters here.generally you won't know until you actually try it. _ From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Monday, November 01, 2010 3:51 PM To: WISPA General List Subject: Re: [WI

Re: [WISPA] Full BGP on RouterOS

Hi J.P. and others, I have a dog in this fight (I work for ImageStream), but this comment applies to just about any situation/hardware. Set up redundant routers using BGP and VRRP (HSRP in Cisco.although apparently they support VRRP also). If you can't afford to be down, you need to find a

Re: [WISPA] Full BGP on RouterOS

Faisal Imtiaz Snappy Internet & Telecom On 11/2/2010 12:04 PM, Jeff Broadwick - Lists wrote: > Hi J.P. and others, > > I have a dog in this fight (I work for ImageStream), but this comment > applies to just about any situation/hardware. > > Set up redundant routers using

Re: [WISPA] Full BGP on RouterOS

I'm curious Travis.not looking for an argument. What specifically do you think is superior in IOS (Unix-based originally) to a hardened, purpose-built Linux distro (us, Mikrotik, Vyatta, whatever)? Regards, Jeff ImageStream 800-813-5123 x106 _ From: wireless-boun...@wispa

Re: [WISPA] Full BGP on RouterOS

s...others not so much. Use what's appropriate. -- Blake Covarrubias On Nov 3, 2010, at 8:04, "Jeff Broadwick - Lists" < <mailto:jeffl...@att.net> <mailto:jeffl...@att.net> <mailto:jeffl...@att.net> jeffl...@att.net> wrote: I'm curious Travis.not lo

Re: [WISPA] Full BGP on RouterOS

Hi Rubens, We've found Quagga to be rock solid with the typical application which is under a dozen peers. We did add a patch to prevent the never-emptying work queue backlog problem when multiple peers flap at the same time. I'm sure this is the problem the IXP folks ran into. Quagga is a very

Re: [WISPA] Full BGP on RouterOS

mining, manufacturing, aerospace, defense, energy, cellular, and even other ISPs. We literally cannot afford to wrestle with the issues others on this list experience. If its not reliable we replace it. We don't have a problem paying for reliability. -- Blake Covarrubias On Nov 3, 2010, at 1:16

Re: [WISPA] [Bulk] Re: Full BGP on RouterOS

__ From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Rubens Kuhl Sent: Thursday, November 04, 2010 10:52 AM To: WISPA General List Subject: [Bulk] Re: [WISPA] Full BGP on RouterOS On Thu, Nov 4, 2010 at 11:42 AM, Jeff Broadwick - Lists wrote: > Hi Ruben

Re: [WISPA] PPPoE Concentrator Redundancy

Per my engineer: The Internet side load balancing will still be performed by BGP with an iBGP connection between the two edge routers. As long as both locations are L2 bridged, PPPoE will provide load balancing as Blake outlined. There will probably be some latency difference between the two rout

Re: [WISPA] Juniper M20

How much aggregate throughput are you looking to handle? Sent from my iPhone On Nov 5, 2010, at 6:21 PM, Mike Hammett wrote: > I am looking at comments or recommendations for a Juniper M20. I was > looking at a PowerRouter 2200 (or equivalent), but someone I'm working > with on this project

Re: [WISPA] Juniper M20

gt; On 11/5/2010 5:39 PM, Jeff Broadwick - Lists wrote: >> How much aggregate throughput are you looking to handle? >> >> Sent from my iPhone >> >> On Nov 5, 2010, at 6:21 PM, Mike Hammett wrote: >> >>> I am looking at comments or recommendations for a

Re: [WISPA] VZW, USCC Contact

Put up an AP using StarOS and "noisebuster" mode nearby on an overlapping channel. Watch their 5.8 backhaul magically disappear and be replaced by something else within a fairly short period of time. Problem solved. Matt Larsen vistabeam.com On 11/9/2010 10:56 PM, Jeromie Reeves wrote: > On

[WISPA] Squid for Video - videocache

Has anyone here tried this out? http://cachevideos.com/ I this sounds like a great idea in theory.Interested to see if it works as well in practice. Matt Larsen vistabeam.com WISPA Wants You! Join today! http

Re: [WISPA] Problems with facebook and hotmail

I don't know whether it helps or not, but we put in policy routes so that every four or eight routed subnets were NATed out through a different IP address. Something like: 192.168.248.0-192.168.255.0 goes out through 208.14.222.10 192.168.240.0-192.168.247.0 goes out through 208.14.222.11 etc

Re: [WISPA] [TowerTalk] Breaking all the tower climbingrulesatanamazingheight...

That's just flippin' nuts! My hands got all sweaty just watching! Aren't you supposed to be tied off at all times during a tower climb? Regards, Jeff ImageStream Sales Manager 800-813-5123 x106 _ From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of J

Re: [WISPA] [TowerTalk] Breaking all the towerclimbingrulesatanamazingheight...

sh Luthman Sent: Thursday, December 02, 2010 11:16 AM To: WISPA General List Subject: Re: [WISPA] [TowerTalk] Breaking all the towerclimbingrulesatanamazingheight... At all times, 100%, above 6 feet. No exceptions. On Dec 2, 2010 11:14 AM, "Jeff Broadwick - Lists" wrote: > That&#

Re: [WISPA] Free Press Floods the FCC With Net Neutrality Petitions

You nailed it Tom! Regards, Jeff ImageStream Sales Manager 800-813-5123 x106 _ From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Tom DeReggi Sent: Wednesday, December 15, 2010 2:30 AM To: WISPA General List Subject: Re: [WISPA] Free Press Floods the FC

Re: [WISPA] Flexible rules promised for wireless

Mark may state his case strongly, but he isn't wrong. Fred stated it better than I could. Even though this particular set of regs may not be particularly onerous.you've just invited the camel under the tent. Regards, Jeff ImageStream Sales Manager 800-813-5123 x106 _ From: wireless

Re: [WISPA] Flexible rules promised for wireless

Fred, You've been advocating splitting the ILECs between their delivery and service models.basically making the delivery (last mile/middle mile) into common carriers and having the service business stand on it's own, for as long as I've been reading your posts (close to 10 years). You haven't

[WISPA] More Spectrum!!

Folks, here is the real opportunity that we need to be focusing on http://arstechnica.com/tech-policy/news/2010/12/white-spaces-could-expand-beyond-unused-tv-spectrum.ars There may be no more important item for wisps to unite in their focus on than this.If we can start to use other "white

Re: [WISPA] he.net

I'm looking to pickup a gig IP pipe from them this summer. My research so far shows that they should be comparable to Cogent, and even better in some ways. We shall see! Matt Larsen vistabeam.com On 1/3/2011 12:43 PM, Matt wrote: >> Anyone else having trouble bringing up www.he.net? > It ap

Re: [WISPA] 11Ghz Licensing Warning Question

Wow Michael, That was an outstanding post. Thank you for taking the time to put it together. Matt Larsen vistabeam.com On 1/13/2011 11:31 PM, michael mulcay wrote: Fred, Tom DeReggi's comments were business-case based and constructive; basically exploring whether the Commission's NPRM o

Re: [WISPA] IPv6 Real or Bust?

Hi Steve, IPv6 is real.as is the need for it. The good news is that we'll get to benefit from work done internationally, as certain other countries are critically short of IPv4 space. Just when it will become something that is mandatory is still an open question. We've had a number of cus

[WISPA] OT: Miss America

Shout out to Miss Nebraska, Theresa Scanlan. She won the talent competition today and is one of the youngest contestants ever in the show (17). The Scanlans are Vistabeam customers and we are very proud of Theresa and her entire family.12 months ago, she was carrying out groceries and n

Re: [WISPA] Smith: Companies must save private data to combat child porn

I will be exercising my right to civil disobedience in the event that something like this comes to pass. This would never make it through the court/judiciary system, so I'm fairly certain it won't be a problem. Matt Larsen vistabeam.com On 1/25/2011 7:22 PM, St. Louis Broadband wrote: Same

Re: [WISPA] WISPA DUES -

Sigh.I think I have a couple pairs of shoes that are older than you guys. :-) Regards, Jeff ImageStream Sales Manager 800-813-5123 x106 _ From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Wednesday, January 26, 2011 10:16 AM To: WISP

Re: [WISPA] Justice Department Seeks Mandatory Data Retention

Department of Pre-Crime? Regards, Jeff ImageStream Sales Manager 800-813-5123 x106 _ From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Jack Unger Sent: Wednesday, January 26, 2011 1:45 PM To: WISPA General List Subject: [WISPA] Justice Department Seeks

Re: [WISPA] Smith: Companies must save private data to combatchildporn

IPv6 makes this tracking even more difficult, if you don't set things up correctly in the first place. Regards, Jeff ImageStream Sales Manager 800-813-5123 x106 _ From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Tom DeReggi Sent: Wednesday, January 26

Re: [WISPA] Tranzeo and Ubnt

Phil, Swap out the CPEs first, then you can swap the APs. That is what I'm doing and it seems to be working very well. The UBNT radios don't seem to have a problem associating to the older APs. I use StarOS for the APs instead of Tranzeo, but that shouldn't make much difference. Matt L

Re: [WISPA] Gigabit Router or L3 Switch?

How much real throughput do they need? Any idea of the average packet size? You could use an ImageStream Rebel router for a WHOLE LOT less than the Cisco: http://www.imagestream.com/Rebel.html Regards, Jeff ImageStream Sales Manager 800-813-5123 x106 _ From: wireless-boun

Re: [WISPA] Gigabit Router or L3 Switch?

No, but we can populate them in our bigger routers. We don't offer wirespeed yet, but we can push multiple Gigs. Regards, Jeff ImageStream Sales Manager 800-813-5123 x106 _ From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Matt Sent: Wednesday, Februa

Re: [WISPA] WISP A Final Definition ...

How about: A company started by a real person (s) who sees a need and decides to try to meet it with a minimum of funding, little to no government support, crazy weather issues, and lots of technical hurdles. They aren't crazy, but it wouldn't be all bad if they were! :-) Regards, Jef

[WISPA] Mikrotik RB411

I just wanted to take this opportunity to mention that the Mikrotik RB411 boards are pieces of crap.Half of the ones I have failed during the cold spell this last week and it turns out that lots of other people have had the same problems.It is very frustrating to see that not all of the

Re: [WISPA] Mikrotik RB411

eek and didn't have a single failure. > > Travis > Microserv > > On 2/5/2011 11:41 AM, Matt Larsen - Lists wrote: >> I just wanted to take this opportunity to mention that the Mikrotik >> RB411 boards are pieces of crap.Half of the ones I have failed >> d

Re: [WISPA] Obama want to control the wireless world

"Obama's wireless plan involves increasing the space available on the airwaves for high-speed wireless by auctioning off space on the radiospectrum to commercial wireless carriers. The White House says this would raise nearly $30 billion ov

Re: [WISPA] FW: [Wisp] ByLaws Committee Members > Demographics >Correctiions

I LIKE Godfather better! (Jack.with cotton in his cheeks): "This is the business that we have chosen" Regards, Jeff ImageStream Sales Manager 800-813-5123 x106 _ From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of St. Louis Broadband Sent: Tuesday, Mar

Re: [WISPA] Calea Compliance

You would be better off putting a passive tap inline and the router as a "probe". If you do that, it will be completely invisible to the end customer. Regards, Jeff ImageStream Sales Manager 800-813-5123 x106 _ From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On

Re: [WISPA] Wispapalooza 2013 Presentations

It's more a space issue than a moderation issue, if you have a small room. Jeff Sent from my iPhone > On Oct 24, 2013, at 2:02 PM, Sam Tetherow wrote: > > I wouldn't be as worried as to the who as long as there is a good moderator > in the room to keep it under control. > >> On 10/24/2013 12:

Re: [WISPA] Internet Packages regarding geography

This last year, we finished "unification" of all our rate plans so that we would have consistency across our network. At this time last year, we had several plans that had overlap and different sets of services as part of the plans. For example, a 2meg plan for $49.95/month that included dia

Re: [WISPA] Internet Packages regarding geography

*From: *"Matt Larsen - Lists" *To: *"WISPA General List" *Sent: *Tuesday, December 31, 2013 1:09:48 PM *Subject: *Re: [WISPA] Internet Packages regarding geography This last year, we finished "unification" of all our rate plans so that we would have consistency

Re: [WISPA] DC FCC TV White Space

+1000! Jeff Sent from my iPhone 574-220-7826 > On Mar 16, 2014, at 5:58 PM, Jack Unger wrote: > > Cameron, > > I'd suggest you email/call Steve Coran who is WISPA's Communications Attorney > in D.C. I'm copying him in. > > WISPA has been working at the FCC for more than 7 years now on WIS

Re: [WISPA] Is ePMP 1000 Lite AP discontinued?

They are still available. People are using them for smaller installs and PTP links. Jeff Broadwick ConVergence Technologies, Inc. 312-205-2519 Office 574-220-7826 Cell jbroadw...@converge-tech.com > On Jan 9, 2017, at 5:03 PM, Chris Fabien wrote: > > Was going to use these + RF element horns

Re: [WISPA] Is ePMP 1000 Lite AP discontinued?

was just looking for them too. What is the part number? I thought they > might be listed as the PtP link but then you get a dish you probably don't > want... And does the part number come with the GPS puck? > >> On Jan 9, 2017 3:35 PM, "Jeff Broadwick - Lists" wrote: &

Re: [WISPA] Procera vs Sandive

Russ Irwin is your guy Matt. Adding him. Jeff Broadwick ConVergence Technologies, Inc. 312-205-2519 Office 574-220-7826 Cell jbroadw...@converge-tech.com > On Feb 15, 2017, at 10:35 PM, Matt Hoppes > wrote: > > I see no one replied. I don't know the cost of Sandvine. @Paging Jeff > Broadwic

Re: [WISPA] Always climb with a buddy......

LOL, isn't that pretty much a BFOQ to leave terra firma and climb a piece of metal hundreds of feet into the sky? Regards, Jeff ImageStream Sales Manager 800-813-5123 x106 _ From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of RickG Sent: Thursday, March

Re: [WISPA] Bandwidth Usage Caps Examples?

I wrote about this on my http://www.wirelesscowboys.com/ blog - http://www.wirelesscowboys.com/?p=88 There are some other articles about Usage Based Billing (UBB) there as well. Read it and see if that helps. Matt Larsen vistabeam.com On 4/21/2011 10:30 PM, Cameron Crum wrote: Talk with Ma

Re: [WISPA] [WISPA Members] alaska

I have contacts up there. What do you need? Regards, Jeff ImageStream Sales Manager 800-813-5123 x106 _ From: members-boun...@wispa.org [mailto:members-boun...@wispa.org] On Behalf Of Mike Goicoechea Sent: Tuesday, April 26, 2011 12:36 PM To: 'WISPA General List'; memb...@wispa.org

Re: [WISPA] Thanks to those concerned

General List; motor...@afmug.com Subject: [WISPA] Thanks to those concerned Our network admin's house, Marlon Williamson who is active on these lists, was completely demolished with him and his family inside. I went by there today and it looks like a war zone. Complete destruction a half mile in

Re: [WISPA] Thanks to those concerned

r the source, please contact the sender directly. On Apr 29, 2011, at 8:18 AM, Jeff Broadwick - Lists wrote: Hi John, Marlon and his family are ok? Regards, Jeff ImageStream Sales Manager 800-813-5123 x106 _ From: wireless-boun...@wispa.org [mailto:wireless-boun...@wisp

Re: [WISPA] My day is now dedicated to UBB research. You should too.

I have a very detailed breakdown of what we did to solve the UBB problem on my Wireless Cowboys blog. You can read it here: http://www.wirelesscowboys.com/?p=88 We went the NetFlow method and correlate customer IP addresses to their Freeside accounts to see who gets billed. Right now, the

Re: [WISPA] My day is now dedicated to UBB research. You should too.

te =P Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, May 3, 2011 at 3:28 PM, Matt Larsen - Lists mailto:li...@manageisp.com>> wrote: I have a very detailed breakdown of what we did to solve the UBB problem on my Wireless C

Re: [WISPA] FW: WISPA Bylaws

member (a WISP that is larger or desired to donate more cash in excahnge for good will).  As well additional classes could be used to allow a membership without certain privilages that other WISPs might have. For example which Lists they have access to

[WISPA] Rural Broadband in Pictures

My latest Wireless Cowboys post.I think this is one of my best yet, and a perfect illustration of why fixed wireless is so important for rural areas.Plus, it has cool pictures! http://www.wirelesscowboys.com/?p=180 Matt Larsen Vistabeam.com -

Re: [WISPA] Choosing core router for small - medium WISP

Hi Bryan, I'm sorry that your ImageStream experience was not what we strive for. I can assure you that it was not typical. We count our ISP customers in the hundreds...everything from small to ones with thousands of customers. We can fully saturate GigE connections with most packet sizes. W

Re: [WISPA] Fwd: Choosing core router for small - medium WISP

Many of our well established customers would take issue with being called "start-up"... :-) Sent from my iPhone On Jul 7, 2011, at 4:34 PM, Roman wrote: > Is there any way to send tables here? > Plain text removed all the borders of my table making it unreadable... > > -- Forwarded m

Re: [WISPA] Choosing core router for small - medium WISP

ImageStream offers them too, but we can't saturate them yet. Jeff ImageStream Sent from my iPhone On Jul 7, 2011, at 8:37 PM, Butch Evans wrote: > On Wed, 2011-07-06 at 15:02 -0500, Mike Hammett wrote: >> Yeah, MT and ImageStream really don't have anything to offer when >> really pushing 10 gi

Re: [WISPA] Choosing core router for small - medium WISP

It's not a processor limitation Fred, it's a Linux issue. It can be fixed, but will require a major re-write. I question that Vyatta has really overcome it. Sent from my iPhone On Jul 7, 2011, at 9:06 PM, Fred Goldstein wrote: > At 7/7/2011 08:47 PM, JeffB wrote: >> ImageStream offers them t

Re: [WISPA] The Legislative Situation Is Dire

It's great to rail against Congress but everyone should understand that, whether we agree with them or not, this IS ultimately their responsibility. Agencies such as the FCC have often taken somewhat vague (often intentionally vague) legislation and taken actions/made rules far beyond what the sign

<    1   2   3   4   5   6   7   >