Deb, Kees,
Yes, I'd done something similar, we have zfs mounts for each user, and then
globbed them together by first letter of the username.
Brian
Extract from disklist
ZFS mounts for samba shares was by specific share, I'd written a script to find
the shares that currently e
latter.
Be careful not to make the drive thrash, you may find you run into issues with
head movement, or at least that had been the conventional wisdom in the past.
Brian
-Original Message-
From: owner-amanda-us...@amanda.org On Behalf
Of Jens Berg
Sent: Tuesday, September 21, 2021 10:30 A
ace in the pool, but some vtape size tuning
may be needed.
Thanks,
Brian
-Original Message-
From: owner-amanda-us...@amanda.org On Behalf
Of Debra S Baddorf
Sent: Friday, September 17, 2021 5:28 PM
To: Charles Curley
Cc: Debra S Baddorf ; amanda-users
Subject: Re: DLE splitting
A
I missed the early part of the discussion. Vtapes?
I had a large zpool I broke up into vtapes, found that if they where too small
I'd waste space, if I recall because partial dumps were not removed from the
'tape' to free up the disk, and if they where too large I'd run into a deadlock
problem
, jukebox and vtape control and have
never had difficulty with cross platform issues (taking into account
OS/filesystem specific native tools).
Brian Cuttler
Wadsworth Center/NYS Department of Health
-Original Message-
From: owner-amanda-us...@amanda.org On Behalf
Of Debra S Baddorf
Sent
disk
performance or something you can't overcome with Amanda tuning.
Best,
Brian
-Original Message-
From: owner-amanda-us...@amanda.org On Behalf
Of Stefan G. Weichinger
Sent: Tuesday, December 3, 2019 9:43 AM
To: amanda-users@amanda.org
Subject: holding disk too small?
ATTENTION: This
, there is
some subtlety that I have clearly missed.
Can anyone provide the files I need, give hints on what I'm doing wrong or help
in some other way?
Thank you,
Brian
Brian Cuttler
Network and System Administrator, ITG - Information Technology Group
Wadsworth Center, NYS Departme
Depending on what I'm testing and its importance I may just # cp
tapelist.yesterday tapelist or manually alter it.
-Original Message-
From: Debra S Baddorf
Sent: Monday, November 26, 2018 3:25 PM
To: Cuttler, Brian R (HEALTH)
Cc: Debra S Baddorf ; Debra S Baddorf ;
amanda-
me
directories are also on separate ZFS mount points but individual backups were
untenable so I glob them by letter, but that means I can't do snapshots.
Based on the latest emails I think Chris may have moved on, but he has these
additional answers for when he cycles back.
Thanks,
B
Deb,
Not sure if I'm understanding your question. If so I believe Amanda was built
with the concept of a once/day run schedule taking into account runs/cycle as
well as days/dumpcycle (for instance 5 run days in a one week dump cycle).
Brian
-Original Message-
From: owner-aman
Sent: Monday, November 26, 2018 1:57 PM
To: Cuttler, Brian R (HEALTH)
Cc: amanda-users@amanda.org
Subject: Re: Another dumper question
ATTENTION: This email came from an external source. Do not open attachments or
click on links from unknown senders or unexpected emails.
inparallel 10
Did you check your maxdumps and inparallel parameters?
-Original Message-
From: owner-amanda-us...@amanda.org On Behalf
Of Chris Nighswonger
Sent: Monday, November 26, 2018 1:34 PM
To: amanda-users@amanda.org
Subject: Another dumper question
ATTENTION: This email came from an external s
I prelabel my tables, both physical and virtual.
Amanda will mount it and report that it isn't an amanda tape. I've never
configured automatic labeling.
-Original Message-
From: owner-amanda-us...@amanda.org On Behalf
Of Debra S Baddorf
Sent: Tuesday, November 20, 2018 2:14 PM
To: Chr
I believe that you would define tape pool of 80 for each, with regular
expressions you may be able to have the same label string format but different
tape number ranges.
Maybe like this?
Sales POOL1[0-9][0-9]
Support POOL2[0-9][0-9]
Research POOL3[0-9][0-9]
For sanity I think I'd define 3 tape
click on links from unknown senders or unexpected emails.
Hi Brian
From: "Cuttler, Brian R (HEALTH)"
mailto:brian.cutt...@health.ny.gov>>
To: "Chris Miller" mailto:c...@tryx.org>>, "amanda-users"
mailto:amanda-users@amanda.org>>
Sent: Thursday, No
I’m configured amanda to run native client utilities gnutar, dump, star (shilly
tar), er something else.
There are certain known and available/approved things you can do, but the
bottom line is always – Amanda is an intelligent, scheduling, wrapper,
client-server using OS native tools.
I thin
scheduling but getting exactly the result he wants.
-Original Message-
From: Debra S Baddorf
Sent: Thursday, November 15, 2018 1:39 PM
To: Cuttler, Brian R (HEALTH)
Cc: Debra S Baddorf ; Charles Curley
; amanda-users
Subject: Re: Configuration confusion
ATTENTION: This email came from an
emails.
Hi Brian,
From: "Cuttler, Brian R (HEALTH)"
mailto:brian.cutt...@health.ny.gov>>
To: "Cuttler, Brian R (HEALTH)"
mailto:brian.cutt...@health.ny.gov>>, "Chris
Miller" mailto:c...@tryx.org>>, "amanda-users"
mailto:amanda-users@
Alternatively - configure all DLE to be non-fulls, disable level 0 backups
entirely and run cron jobs to force level 0 dumps on particular DLEs.
That way you can get level 0 when you want it to occur an no other DLE will
advance to a level 0 on its own.
# amadmin config force client DLE
-Or
book procedure for restoring TAR/DUMP
backups).
From: owner-amanda-us...@amanda.org On Behalf
Of Cuttler, Brian R (HEALTH)
Sent: Wednesday, November 14, 2018 11:44 AM
To: Chris Miller ; amanda-users
Subject: RE: Configuration confusion
ATTENTION: This email came from an external source. Do not
You can run amanda multiple times per night, and each config can specify a
different, MUST specify a different set of tape labels, different tape pools.
But I don’t believe you can run multiple amanda servers concurrently.
Could you run your tapes with the highest security level so that DLEs can
can only reply to a single
master, you can’t have multiple concurrent clients on the server end.
Brian
Brian Cuttler
Network and System Administrator, ITG - Information Technology Group
Wadsworth Center, NYS Department of Health
Biggs Lab, Empire State Plaza, Albany, NY 12201
(518) 486-1697
uation never come up.
-Original Message-
From: Debra S Baddorf
Sent: Thursday, November 8, 2018 3:44 PM
To: Cuttler, Brian R (HEALTH)
Cc: Debra S Baddorf ; Chris Nighswonger
; amanda-users@amanda.org
Subject: Re: Breaking DLEs up
ATTENTION: This email came from an external source. Do
:21 PM
To: Cuttler, Brian R (HEALTH)
Cc: amanda-users@amanda.org
Subject: Re: Breaking DLEs up
ATTENTION: This email came from an external source. Do not open attachments or
click on links from unknown senders or unexpected emails.
On Thu, Nov 8, 2018 at 1:56 PM Cuttler, Brian R (HEALTH
user-tar2
include "./[A-Z]*"
}
I’ve removed all but the last email you wrote from this email, it was getting
long for little or no gain.
From: Chris Nighswonger
Sent: Thursday, November 8, 2018 1:25 PM
To: Cuttler, Brian R (HEALTH)
Cc: amanda-users@amanda.org
Sub
Stupid question, host fileserver, directories /netdrives/CAMPUS/s* to
/netdrives/CAMPUS/z* exist and have some files in them?
From: Chris Nighswonger
Sent: Thursday, November 8, 2018 12:11 PM
To: Cuttler, Brian R (HEALTH)
Cc: amanda-users@amanda.org
Subject: Re: Breaking DLEs up
ATTENTION
(or equiv).
From: Cuttler, Brian R (HEALTH)
Sent: Thursday, November 8, 2018 12:00 PM
To: 'Chris Nighswonger'
Cc: amanda-users@amanda.org
Subject: RE: Breaking DLEs up
Client and server side?
/var/log/amanda/ ?
From: Chris Nighswonger
mailto:cnighswon...@foundations.edu>>
Client and server side?
/var/log/amanda/ ?
From: Chris Nighswonger
Sent: Thursday, November 8, 2018 11:43 AM
To: Cuttler, Brian R (HEALTH)
Cc: amanda-users@amanda.org
Subject: Re: Breaking DLEs up
ATTENTION: This email came from an external source. Do not open attachments or
click on links
I have been using a very similar setup for years, though I did not have any
quotes in the first line of each DLE. I do NOT believe the quotes are an issue.
What do the /tmp/amanda files show for these attempted dumps?
From: owner-amanda-us...@amanda.org On Behalf
Of Chris Nighswonger
Sent: Thu
holding area and believe it help to improve performance as there were few files
and fewer file creates/accesses/deletes later on.
From: Chris Nighswonger
Sent: Tuesday, November 6, 2018 2:38 PM
To: Cuttler, Brian R (HEALTH)
Cc: ned.danie...@duke.edu; amanda-users@amanda.org
Subject: Re: dumporder
Xhost, and environmental variable DISPLAY, plus your output needs to be x11.
You can also write a pdf file and print it, or view with an appropriate viewer.
-Original Message-
From: owner-amanda-us...@amanda.org On Behalf
Of Chris Nighswonger
Sent: Tuesday, November 6, 2018 1:18 PM
To: n
I think you need to provide the name of the amconfig. I believe it reads
amanda.conf.
-Original Message-
From: Chris Nighswonger
Sent: Tuesday, November 6, 2018 11:51 AM
To: Cuttler, Brian R (HEALTH)
Cc: amanda-users@amanda.org
Subject: Re: dumporder
ATTENTION: This email came from
It has been a while, title might be the org string from amanda.conf?
I'm sorry, it has been years since I ran it regularly.
-Original Message-
From: Chris Nighswonger
Sent: Tuesday, November 6, 2018 11:42 AM
To: Cuttler, Brian R (HEALTH)
Cc: amanda-users@amanda.org
Subjec
Note on that - you want to maximize throughput, not maximize the number of
running dumpers.
More dumpers moving data is usually good, but more isn't always better.
-Original Message-
From: owner-amanda-us...@amanda.org On Behalf
Of Cuttler, Brian R (HEALTH)
Sent: Tuesday, Novem
Nighswonger
wrote:
>
> Is there any wisdom available on optimization of dumporder?
>
After looking over the feedback from Brian and Austin and reviewing the actual
sizes of the DLEs, I ended up with this sort of thing:
inparallel 15
dumporder "STs"
Which resulte
Depends on how many dumpers you are using, I like of like TSTSTSts, or
something like that. Also very much depends on the size/length of the relative
dumps, but I do like to kick off some of the longest ones early.
Caveat – I haven’t done enough experimentation to know that what I’m doing is
ac
inbound traffic is IPv4.
Sorry for the earlier error.
Brian
11:29:40.183354 IP (tos 0xc0, ttl 64, id 11278, offset 0, flags [none], proto
ICMP (1), length 80)
biowork2.health1.hcom.health.state.ny.us > flower.wadsworth.org: ICMP host
biowork2.health1.hcom.health.state.ny.us unreacha
tcp amdump amindexd amidxtaped
}
Either I’m missing a step or I’m not chasing the correct problem.
Any help would be appreciated.
Brian
Brian Cuttler, Wadsworth Center/NYS Dept of Health
Albany, NY 12201
appreciated.
Thank you,
Brian
[root@netd /tmp/amanda/amandad]# more amandad.20180417104331.debug
Tue Apr 17 10:43:31 2018: thd-0x28a1ee00: amandad: pid 57255 ruid 210 euid 210
version 3.3.9: start at Tue Apr 17 10:43:31 2018
Tue Apr 17 10:43:31 2018: thd-0x28a1ee00: amandad:
security_getdriver
LD_LIBRARY_PATH so my cron initiated processes
and its client jobs will find it?
Solaris 10 system.
thank you.
Brian
---
Brian R Cuttler brian.cutt...@wadsworth.org
Computer Systems Support(v) 518 486-1697
Wadsworth Center(f) 518 473-6384
NYS
iffering clients:
> > --with-bsd-security \
> > --with-krb5-security \
> > --with-bsdtcp-security \is default so I guess I dont explicitly
> > add that line, but its a good idea to do so
>
> I was not aware of that, but then my system is a pretty small m
e that has dump in the build environment and all is well.
>
> - J<
---
Brian R Cuttler brian.cutt...@wadsworth.org
Computer Systems Support(v) 518 486-1697
Wadsworth Center(f) 518 473-6384
NYS Department of HealthHelp Desk 518 473-0773
a different filesystem, which this present situation
> > > is most certainly not. Different directory yes, different
> > > filesystem, no.
> > >
> > > Thanks.
> > >
> > > Cheers, Gene Heskett
>
>
> Cheers, Gene Heskett
> --
> "There are four boxes to be used in defense of liberty:
> soap, ballot, jury, and ammo. Please use in that order."
> -Ed Howdershelt (Author)
> Genes Web page <http://geneslinuxbox.net:6309/gene>
> US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS
---
Brian R Cuttler brian.cutt...@wadsworth.org
Computer Systems Support(v) 518 486-1697
Wadsworth Center(f) 518 473-6384
NYS Department of HealthHelp Desk 518 473-0773
se the full capacity??
> >
>
> A guess only.
>
> I note the measured speed has dropped by 45%. Due to what I haven't a clue,
> but maybe some hardware change or cables or ???
>
> Perhaps your system's ability to feed the drive has dropped below the
>
On Wed, Mar 12, 2014 at 01:11:03PM -0400, Brian Cuttler wrote:
>
> Don't know if its relevant, but I've got an LTO5/juke and it
> dropped in both speed and capacity. I'm now trying to remember
> if I had the host ESAS card replaced, or the I/O module in the
> juke...
index files and would leave the dumps on your
> > holding disk without using up a tape.
> > Since you wouldn't be going to tape, it might over-fill your holding
> > disk, which is why I suggested doing
> > a few DLEs at a time.
> >
> > Deb
---
Brian R Cuttler brian.cutt...@wadsworth.org
Computer Systems Support(v) 518 486-1697
Wadsworth Center(f) 518 473-6384
NYS Department of HealthHelp Desk 518 473-0773
gt; > >
> > > Here's my setup in amanda.conf:
> > >
> > > define holdingdisk holdingdisk1 {
> > > directory "/mnt/amanda-holdingdisk1/"
> > > use 4500Gb
> > > chunksize 100Gb
> > > }
> >
> > Others
>
> I ran a level 0 dump and saw this:
>
> USAGE BY TAPE:
> Label Time Size % DLEs Parts
> 000406-jet121:212152G 152.1 2 181
> 000407-jet1 7:17 660G 46.6 156
>
> which looks t
Hugh,
Glad to have been of help.
Others may weigh in with alternate strategies but it sounds
as if you have a satisfactory plan for now.
Good luck,
Brian
On Tue, Feb 04, 2014 at 09:47:18AM -0800, Hugh E Cruickshank wrote:
> From: Brian Cuttler Sent: February 4, 2014 07:42
> >
>
you
simply pulling a tapecycle of tapes?
How are you keeping your currently monthly's out of the re-use cycle?
> TIA
>
> Regards, Hugh
>
> --
> Hugh E Cruickshank, Forward Software, www.forward-software.com
>
---
Brian R Cuttler brian.cutt...@wadswo
On Wed, Jan 08, 2014 at 11:18:46AM -0500, Jean-Francois Malouin wrote:
> * Brian Cuttler [20140108 11:09]:
> >
> > Jean-Louis,
> >
> > googled it... I had my numbers wrong, it can supposedly hold
> > 800 Gig, and with HW compression up to 2x that. I should not
&
ssage...
I think I need to run a cleaning tape and keep an eye on this.
thank you,
Brian
On Wed, Jan 08, 2014 at 10:57:22AM -0500, Jean-Louis Martineau wrote:
> On 01/08/2014 10:47 AM, Brian Cuttl
wrong tape length.
If they are LTO IV tapes, they hold 400 Gig, up to 800 G with
HW compression, which we are not using...
Q - Would it be correct to reset the tape length to 400 Gig ?
thank you/rookie mistake,
1512 79.50:30 400.4 0:04 3051.8
finsen hp10p/ivcp 0 26016 19360 74.4 17:55 18450.1 5:02 65645.7
finsen -0p/virologypt 015 3 17.80:03 854.1 0:04 695.8
(brought to you by Amanda version 3.3.0)
- End forwarded message -
---
Brian R Cuttler
be
> violated, and no Warrants shall issue, but upon probable cause,
> supported by Oath or affirmation, and particularly describing the
> place to be searched, and the persons or things to be seized.
> -- U.S. Const. Amendment IV
>
> Key fingerprint = CE5C 6645 A45A 64E4 94C0 809C
pend little or no time thinking about
the magic that the sys admins work for them.
thank you,
Brian
---
Brian R Cuttler brian.cutt...@wadsworth.org
Computer Systems Support
anda.conf to say that the
> tape length is set to 16G so amanda writes 24G to 25G to each tape. But
> that's hardly an ideal solution.
>
>
>
> --
> ---
> John G. Heim, 608-263-4189, jh...@math.wisc.edu
---
Brian R Cuttler brian.cutt...@wadsworth.org
Computer Systems Support(v) 518 486-1697
Wadsworth Center(f) 518 473-6384
NYS Department of HealthHelp Desk 518 473-0773
thank you,
Brian
---
Brian R Cuttler brian.cutt...@wadsworth.org
Computer Systems Support(v) 518 486-1697
Wadsworth Center(f) 518 473-6384
NYS Department of HealthHelp Desk 518 473-0773
new mount name, remains
to be seen...
Thank you,
Brian
On Fri, Sep 13, 2013 at 12:02:13PM -0700, Chris Buxton wrote:
> On Sep 11, 2013, at 8:11 AM, Brian Cuttler wrote:
> > We have remapped some of our DNS clients to point to another
> > DNS resolver, one that we do not co
say.
thank you,
Brian
On Wed, Sep 11, 2013 at 01:36:41PM -0700, Paddy Sreenivasan wrote:
> Brian,
>
> You can check the Amanda windows client logs in the Debug folder to see why
> it is
thanks in advance,
Brian
---
Brian R Cuttler brian.cutt...@wadsworth.org
Computer Systems Support(v) 518 486-1697
Wadsworth Center(f) 518 473-6384
NYS Department of HealthHelp Desk 518 473-0773
On Wed, Jul 31, 2013 at 01:43:50PM -0400, Mike Neimoyer wrote:
> Thanks to Gerrit, Brian and Jean-Louis. I'll be responding to them in
> this message
>
>
> Hello Gerrit, thanks for chiming in!!>> include "./[a-c].*"
> > Maybe you should first try a
Telefoon: +31 24 352 72 22
> Dé one-stop-Linux-shop Telefoon cursussecretariaat: +31 24 352 72 72
>Fax: +31 24 352 72 92
> Kerkenbos 12-38t...@atcomputing.nl
> 6546 BE Nijmegen www.atcomputing.nl
>
> Nieuw bij AT Computing: onze Linux Reference Card nu ook als
fax +49 30 698084-29
> mobile +49 176 49118462
> skype: parceval3000
> AIM: in...@mac.com
> Jabber: parce...@jabber.org
>
---
Brian R Cuttler brian.cutt...@wadsworth.org
Computer Systems Support(v) 518 486-1697
Wadsworth Center(f) 518 473
ocalhost ...
> [request failed: timeout waiting for ACK]
>
> Totally puzzled, because the Amanda backups seems to have been running
> flawlessly. I can access the tape drive with mt and the changer with mtx,
> and Amanda has been writing stuff to tapes.
>
> As I mentioned in my rep
ve had an Ubuntu server as the Amanda server
> (I've had a bunch of them as clients), and it seems that it breaks the work
> flow that I am used to. Still, I will need to straighten out what it is
> doing with regard to tape drive and index server.
>
>
>
> On 6/17/13 2:0
on't want to make further changes before the weekend, think I'll
implement auth="local" for amdump on Monday and see how it performs.
thank you,
Brian
On Wed, Jun 05, 2013 at 01:41:16PM -0400,
AM, Jean-Louis Martineau wrote:
> >Brian,
> >
> >Can you increase the number of open files at the system level?
> >
> >amcheck check all DLEs in parallel, you can try to add spindle (in the
> >disklist) to reduce parallelism but that can have a bad impact
behavior since amanda 3.3.0 which was the previous
version on this system.
Amanda server has only one client, itself.
I'm not sure where to even start unraveling this.
thank you,
Brian
--
hing I can script in cron on the
server. The fact that the client and the server are the same
box doesn't help much in this case.
thank you,
Brian
On Wed, Jun 05, 2013 at 03:08:45PM -0400, Jean-
appreciative if they would share their
information.
thank you,
Brian
On Wed, Jun 05, 2013 at 11:54:35AM -0400, Jean-Louis Martineau wrote:
> Brian,
>
> Can you increase the number of
check tests run successfully. Will run # amdump
this evening but do not anticipate any issues there.
thank you,
Brian
> amcheck -c finsen
Amanda Backup Client Hosts Check
e \ /Respect for open standards
> and/or writing? X No HTML/RTF in email
> http://www.charlescurley.com / \No M$ Word docs in email
>
> Key fingerprint = CE5C 6645 A45A 64E4 94C0 809C FFF6 4C48 4ECD DFDB
---
Brian R Cuttler brian.cutt...@wadsworth.org
x27;t also
need to touch the switches, which are default and what I have
on other boxes.
Q: Do I want to remove the --no-check-device switch in the general case?
thanks,
Brian
On Tue, May 21, 201
o I have something
more complex to worry about?
thanks,
Brian
---
Brian R Cuttler brian.cutt...@wadsworth.org
Computer Systems Support(v) 518 486-1697
Wadsworth Center
mons would often hang after job completion,
causing problems dumping the 'pending' DLE the next day.
We'll see how the client behaves this evening.
On Thu, May 16, 2013 at 03:11:33PM -0400, Brian Cuttler wrote:
> On Thu, May 16, 2013 at 03:02:53PM -0400, Jean-Louis Martineau wr
On Thu, May 16, 2013 at 03:02:53PM -0400, Jean-Louis Martineau wrote:
> On 05/16/2013 02:53 PM, Brian Cuttler wrote:
> >/tmp/amanda/amandad - which was created by the manual run
> >of amandad, no new files.
>
> If telnet do not create a new debug file it is because amand
/tmp/amanda/amandad - which was created by the manual run
of amandad, no new files.
On Thu, May 16, 2013 at 02:50:37PM -0400, Jean-Louis Martineau wrote:
> On 05/16/2013 02:46 PM, Brian Cuttler wrote:
> >But I'm not seeing, perhaps, looking in the wrong directory, any
> >
Jean-Louis,
On Thu, May 16, 2013 at 02:40:28PM -0400, Jean-Louis Martineau wrote:
> Brian,
>
> Do a: telnet grifserv.wadsworth.org amanda
> create an amandad debug file on grifserv?
> telnet grifserv amanda
Trying 10.49.66.6...
Connected to grifserv.wadsworth.org.
Esca
: thd-2ba30: amandad:SETPGRP_VOID
AMANDA_DEBUG_DAYS=4 BSD_SECURITY USE_AMANDAHOSTS
Thu May 16 13:51:02 2013: thd-2ba30: amandad:CLIENT_LOGIN="amanda"
CHECK_USERID HAVE_GZIP
Thu May 16 13:51:02 2013: thd-2ba30: amandad:COMPRESS_SUFFIX=".gz"
COMP
gt;hold compressratio 1.00x -
> >hold mounted no -
> >hold quota none default
> >hold reservation none default
> >hold recordsize128K
have existed in roman numerals, but its
important in our system, very very important.
Now to replicate the install on half a dozen other clients.
thank you,
Brian
On Thu, Apr 25, 2013 at 02:53:14PM
Jean-Louis,
On Thu, Apr 25, 2013 at 11:03:50AM -0400, Jean-Louis Martineau wrote:
> On 04/25/2013 10:39 AM, Brian Cuttler wrote:
> >Already, _now_ I'm ready to solve the real problem...
> >
> >Server is Solaris 10 x86, Amanda server 3.1.2.
> >
> >Clie
rhaps I'm looking in the wrong debug file?
Perhaps my amanda-client.conf is in the wrong directory?
thank you,
Brian
---
Brian R Cuttler brian.cutt...@wadsworth.org
Computer S
ild it locally?
Do I have the wrong directory?
Am I using the wrong options or values?
Not sure what I'm doing wrong, any help appreciated.
thank you,
Brian
---
Brian R Cuttler
and which directory, as I've seen some of the
pre-built kits use directories other than /usr/local/etc/amanda/
Yah, a lot of questions, hopefully on the correct path.
thank you,
Brian
On Fri, Apr 12
ttaching the /tmp/amanda tree as a tar file. Just so its
not lost if we need to refer back to it later on.
thank you/good weekend,
Brian
On Fri, Apr 12, 2013 at 01:28:02PM -0700, Jean-Louis Marti
s for your help,
Brian
amandad.20130412143850.debug
::
amandad: debug 1 pid 18050 ruid 110 euid 110: start at Fri Apr 12 14:38:50 2013
amandad: version 2.5.0p2
amandad: build: VERSION="Amanda-2.5.0p2"
amandad:BUILT_DATE="Thu Feb
e and spindle speeds?
good luck,
Brian
On Fri, Apr 05, 2013 at 11:09:16AM -0400, Chris Hoogendyk wrote:
> Thank you!
>
> Not sure why the debug file would list runtar in the form of a parameter,
> when it&
n the command line? If you run it
verbose, can you see where
its hangs or where it slows down?
On 4/4/2013 12:34 PM, Chris Hoogendyk wrote:
Still getting blank emails on a test reply (just to myself) to Brian's
emails. So, I'm replying to my own email to the list and then pasting
in the
#x27;t want a
non-compressed backup. (Jean-Louis will know off-hand)
How does the dump phase perform?
On Wed, Apr 03, 2013 at 05:42:12PM -0400, Chris Hoogendyk wrote:
> For some reason, the headers in the particular message from the list (from
> Brian) are causing my mail client or someth
13: thd-32a58: sendsize: waiting for runtar
> "/export/herbarium" child
> Mon Apr 1 10:16:17 2013: thd-32a58: sendsize: after runtar
> /export/herbarium wait
> Mon Apr 1 10:16:17 2013: thd-32a58: sendsize: done with amname
> /export/herbarium dirname /export/herbarium s
easible? Which document will guide me through the configuration
> of such backup scheme?
>
> Thanks in advance,
>
> --
> Erik
>
> Concordia parv? res crescunt discordia maxim? dilabuntur
---
Brian R Cuttler brian.cutt...@wadsworth.org
Compute
Amit,
Did I understand you to say that you are not using an amanda
work area, an area on the server for temporary files?
Brian
On Fri, Mar 15, 2013 at 08:15:38AM -0400, Jean-Louis Martineau wrote:
> On 03/15/2013 12:11 AM, Amit Karpe wrote:
> >
> >I did not able to observe para
Amit,
I don't think you told us how many client systems, compression
can be done on the client or the server. Also, besides the inparallel
and maxdump settings, are you short on work area - as Jean-Louis
said, the amplot output will help you spot those bottlenecks.
Brian
On Thu, Mar 14,
t, once I've gotten around to
working on this and have it tested.
thanks,
Brian
---
Brian R Cuttler brian.cutt...@wadsworth.org
Computer Systems Support(v) 518 486-16
include this in a new definition for this client's DLE and see
how it works for us.
thank you,
Brian
On Fri, Jan 25, 2013 at 11:08:41AM -0500, Jean-Louis Martineau wrote:
> On 01/25/2013 10:12
thank you,
Brian
---
Brian R Cuttler brian.cutt...@wadsworth.org
Computer Systems Support(v) 518 486-1697
Wadsworth Center(f) 518 473-6384
NYS Department of HealthHelp Desk 518 473-0773
and it went on with no problem.
>
> best regards,
>
> Olivier
---
Brian R Cuttler brian.cutt...@wadsworth.org
Computer Systems Support(v) 518 486-1697
Wadsworth Center(f) 518 473-6384
NYS Department of HealthHelp Desk 518 473-0773
Gour,
On Sat, Oct 27, 2012 at 10:24:04AM +0200, Gour wrote:
> On Fri, 26 Oct 2012 11:40:20 -0400
> Brian Cuttler wrote:
>
> > That is odd, and not reflective out output for ZFS file systems
> > on a Solaris box.
>
> Hmm..
>
> > Clearly the script will no
1 - 100 of 1044 matches
Mail list logo