Hello all
I am using Whatsup gold as Network Management system .
Now I want to collect the data on syslog server which
is freeware.Can anybody suggest me some syslog
servers. I tried Kiwi syslog Daemon ,but is there
anything better than it ?
Thanks in advance ...
Piyush
hi all,
have the following scenario.
ISP -- DSL Router -- FreeBSD -- 2511 -- CCIE Lab
I do a telnet from the internet to my DSL router.
from the router a telnet to my unix box.
from there I do a cu -l /dev/cuaa1 -s 9600 to connect to the 2511 via the
COM1. this works fine !!
from the 2511 I
Hi,
Here is the config of Router A and Rotuer B trying to do mobile IP between
them. I am running (C2500-JS-L), Version 12.2 on my 2501s. HostA here is a
Windows 2000 Professional client which is not responding to the mobile IP
advertisements.
R1-R2
| |
The one is from Bernard
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52272t=52240
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
List,
I have few questions about some limitations and your suggestions.
1. How many interfaces can the ATM card handle ?
2 - What is the difference between point-to-point interfaces and multipoint
ones ?
3 - Is there any better way to configure ADSL customers rather than going to
the Cisco
Not understanding or actually having read about Mobile IP, but I'm going
to ask about your Windows 2000 Machine
Is Your windows 2000 machine configured with a static or dynamic address?
If it is configured with a dynamic address and is booted up on a network
that does not have a DHCP server
I don't know how much this counts but since it is a serial interface, maybe
you should put the bandwidth command for the interface, since it is a T1
--
PASTE
MTU 1500 bytes, BW 2048 Kbit, DLY 2 usec,
Available Bandwidth 1536 kilobits/sec
---
Would
thanks for your reply...but I use a static IP addrs on my win2k box.
thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52276t=52215
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
HI
Has any one done configuration of VG200 with Cosmocom Call Center server? Can
any one give me the configuration of VG200.
Thanks and regards
Mukesh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52277t=52277
--
FAQ, list
In a similar situation I found that entering ctrl+shift+6 twice before the x
worked. The sequence is ctrl+shift+6 ctrl+shift+6 x.
Good luck.
-gt
Antonio Montana wrote:
hi all,
have the following scenario.
ISP -- DSL Router -- FreeBSD -- 2511 -- CCIE Lab
I do a telnet from the
thorne,
thanks a lot ...
it's working !!
regards,
monti
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52280t=52270
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
I thought I should share some info with the group, especially those
interested in pursuing the Security CCIE. I passed the written last week,
and the system finally updated last night so that I could register for the
lab. By the way, all lab types can be registered for on the web now.
According
Sorry to bother the list, but I have a bouncing email address.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52283t=52283
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
SANS has a great collection of canned policies that are VERY thorough. Grab
em
-Original Message-
From: Tim Medley
To: [EMAIL PROTECTED]
Sent: 8/28/2002 5:52 PM
Subject: RE: Security Policy [7:52061]
I'd be interested in something like this too, to use as a template.
Perhaps someone
Hi Cisco gods,
I have successfully blocked all chat services at the PIX firewall, I
think. As I walk around and find people using MSN or Messenger I find
that public proxy they are using and kill it too. BUT, I am having a
hell of a time with ICQ. I do have all the ports UDP and TCP blocked so
12.1(5)T9 enterprise at the moment.
thanks,
-Brad Ellis
CCIE#5796 (RS / Security)
Network Learning Inc
[EMAIL PROTECTED]
www.optsys.net (Cisco hardware)
Tribavan Raina wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi guys,
..The CCIE web site says
Specific features new to
Hello Brad,
Ethernet patches?? Do you mean normal Ethernet straight-through cables,
or Ethernet cross-over cables??
Thanks in advance,
H.
Brad Ellis wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Ethernet connections??? Maybe you mean ethernet patch cables connecting
the
I definitely agree on the difficulty of this new exam. I have spoken to a
number of people that have taken the new CCIE Written exam and they have all
failed miserably. And I mean miserably. Apparently, the scoring is now
different. It's not a straight 70% passing score anymore. For example, one
Hi all,
What is the difference between 3550 and 3500?
For CCIE lab, can you practice on 3500 only, or do you need a 3550?
Thanks all
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52286t=52286
--
FAQ, list archives, and
Thank you Mark! John, like Mark said boot camps are the easy way to get a
cert but do little for your skill set unless you have a photographic memory.
There is nothing that can replace hard core studying and experience. When I
hire certed people I actually drill them in real world situations
The two switches are similar in command appearance, but way different in
terms of functionality. Even a quick look at the documentation as found on
CCO should tell you that.
yes you will need eye time with the docs and finger time with the 3550
itself. There are far too many things different
Hi Group,
Could anyone please tell me is there a way to connect FXS to Key system, I
was thinking that it can only be used to connect to an Analog phone or Fax,
but I have heard there is a way to connect it to Key system, I guess in that
case some programming might be needed in Key System.
Hi H,
What you need is a normal Straight through Ethernet Cable to connect from
the Slimline-2 or Slimline-6 directly onto a Cisco 2503 ISDN Interface.
You could use the same Ethernet Straight-Through cable if you have ISDN at
your home to connect from the NT1 to an ISDN Device.
An Ethernet
I'm not too sure if my previous message was sent. Here it is again:
Verizon NOC @ 1-800-243-6994
Good luck.
Erich Kuehn wrote:Does anyone have a Verzion contact that could help with
setting up a 2600
with a DSL wic. Or configs that might work.
Thanks
Erich
Do You Yahoo!?
Yahoo! Finance - Get
Rob,
Currently we use MS Proxy server to restrict Internet access so I,
unfortunately, do not have your answer. Your offer to post your ACL for
peer-to-peer blocking would be very appreciated though. Soon we will be
removing Proxy and allowing our new PIX to restrict Internet access. At that
John Dorffler wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I thought I should share some info with the group, especially those
interested in pursuing the Security CCIE. I passed the written last week,
and the system finally updated last night so that I could register for the
All,
Does anyone know if using a seconday interface on fast ethernet 0/0 on a
7204 will degrade perfomance on the network for the primary interface? I
have to route a a different subnet on a LAN and cannot do it without
creating a secondary interace?
for instance
interface FastEthernet0/0
ip
Hi All,
I've come across a cable I haven't seen before, its a cisco Y cable.
One end has a DB25 female and splits into two DB25 males. The two male
ends have a sign that says Console 72-1032-01 and labels that say
Console cisco router this end.
I've seen a similar post in groupstudy back in
yes, if you've had the cable since 1999 and still don't know what it is,
throw it out or put it up on e-bay already! :)
thanks,
-Brad Ellis
CCIE#5796 (RS / Security)
Network Learning Inc
[EMAIL PROTECTED]
www.optsys.net (Cisco hardware)
Vicuna, Mark wrote in message
[EMAIL
Make sure that you carefully figure out the correct side of the connection.
ICQ server runs on port 4000, and the client chooses a random high-numbered
port. That means you will see UDP packets FROM (inbound/source) port 4000
going to the random port. In other words, don't go looking in a port
There's no lifetime on your ip mobile host statement for the foreign agent
Did you verify the map with sh ip route mobile, how about submitting
output of sh ip mob int to verify the advert's
(plus I'm assuming you ran the ip mobile foreign-service on R2)
Bill Creighton CCNP
Senior System
FYI - from our lab...
Our config for our equivalent of your R2:
interface Ethernet0
ip address 10.0.0.1 255.0.0.0
interface Ethernet1
ip address 10.0.0.10 255.0.0.0
ip irdp
ip irdp maxadvertinterval 10
ip irdp minadvertinterval 7
ip mobile foreign-service
ip mobile registration-lifetime
Vicuna, Mark wrote:
I've come across a cable I haven't seen before, its a cisco Y cable.
One end has a DB25 female and splits into two DB25 males. The two male
ends have a sign that says Console 72-1032-01 and labels that say
Console cisco router this end.
Might be a 7500 console cable
sounds like something I see on 7500 routers with dual
processor cards..
Larry Letterman
Cisco Systems
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Vicuna, Mark
Sent: Thursday, August 29, 2002 9:35 AM
To: [EMAIL PROTECTED]
Short answer would be not unless the volume of data was a problem or the new
configuration caused packets to be switched(proccess, ...) in a different
manner than before.
I think you want to do:
int fa0/0
ip addr 205.109.29.x(where x is 128) 255.255.255.128
ip addr 205.109.29.33 255.255.255.224
Hello all,
Can anyone enlighten me on the behavior of having multiple ip
helper-address statements on the same interface? We are setting up a DHCP
solution where we will have two DHCP servers and the Cisco router serving as
the relay agent. If I have two ip helper-address statements
It just copies the UDP broadcast packets to all address specified. So you
could put in a second DHCP server. Any DHCP request would be sent to both
servers. Both would respond and the client would select which one to take.
Message Posted at:
I was wondering if anyone else has been experiencing problems with Cisco's
IDS sensor appliance (formerly Netranger). Almost every time I load a
service pack or new signature file I end up rebuilding the device from
scratch using the install CD's. I've filed multiple cases with TAC, with
little
That's what it is, used for connecting to dual RSP cards, though the
one I have in the lab doesn't have that number on it the description is
otherwise the same.
Dave
Larry Letterman wrote:
sounds like something I see on 7500 routers with dual
processor cards..
Larry Letterman
Cisco
Is there a way to do QOS policing based on time. For example limit http
traffic to 50% of the bandwidth 9am to 5pm only. Does any one have any
useful configs or links,
Thanks for the help
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52310t=52310
Though I'm not sure how the nonsensical static route would alleviate
the need for a secondary the secondary interface shouldn't be much of an
issue. Of coarse I'm assuming your not adding a secondary network with
500 hosts.
ip route-cache same-interface is useful if routing between the
IIRC, the way you make this work is to make the Ethernet interface(on
the Router) a trunk link to your switch with ISL or dot1q Vlans. Each
VLan represents the Subnet of choice. With this in place, you enable
routing between the vlans on the router, and then configure the IP
Helper address on
How do you do that I thought that if say, you had 10.1.1.1 as the IP
for your outside interface. Then you could not use 10.1.1.1 as the PAT'ed
address !!! I tried this two months ago and it failed (Ver 6.2) !!! So I
had to use a different IP address as the PAT'ed address ie. 10.1.1.2
I set up two gateways with session target to each other and made calls
between them successfully. I introduced gatekeeper and the gateways
registered successfully to the gatekeeper, but do not complete calls. I will
appreciate pointers from voice gurus. Below are my configs and sh gate end
If you live / work in Monterey, CA, can you contact me off line please.
thanks very much
Chuck
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52314t=52314
--
FAQ, list archives, and subscription info:
It's the same thing with the Routing and Switching dates.none till
April 1.
Keith
John Dorffler wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I thought I should share some info with the group, especially those
interested in pursuing the Security CCIE. I passed the
Come on, guys. I hate to put it to you this way, but RTFM. I really don't
want to come off as overly harsh, but in the future, just remember that the
docs really do contain a lot of answers.
The following example enables PAT using the IP address at the outside
interface in global configuration
You have to configure the gateways so that they register the required
dial-peers with the gatekeeper. For example:
Dial-peer voice 101 pots
destination-pattern 320T
register --- This makes the gateway register this dial-peer with the
gatekeeper.
Port 0/0
When the gateway is
Am not having any luck configuring a cat 1200 using hyperterm and the
rollover cable and adapter that I used to configure a 2500 router. Am not
seeing anything in the Hyperterm session. TIA!!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52319t=52319
The router would forward the broadcast as multiple unicast packets, one to
each IP listed as a IP-Helper. The client would accept the first response
that it gets.
Mike W.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52320t=52305
I have seen it like this
f I have two ip helper-address statements on the
Ethernet
interface of the router, each one pointing to a different DHCP server,
will
the router send the unicast message to each server?
Yes the router will send request to both the servers and will forward the
reply from
Bernard,
Thanks for your wonderful advise. I'm sure it will be very helpful for lot
of us.
Warm regards.
Asif
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52322t=52235
--
FAQ, list archives, and subscription info:
let me know
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52324t=52243
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
if u do practice ,
and know the material , it is a helpJohn Brandis wrote:
Hi All,
Can some one plase describe for me if you have time, how the
ccie lab is
conducted, how you felt during the lab ?
Just keen to know
john
Sydney, Australia
Well, this has been interesting...
I read the original posters' question as being one thing, and responded
accordingly.
Everyone else responded to the question, looking at it from a different
angle than I was.
Jose, can you clarify if these two DHCP Servers are acting as backups or
load balance
haha.. no i meant i saw a post from someone with the same query back in
99 :)
I do see a reference to a y cable in the 7500 product reference manual,
never seen it in use though to be honest.
Thanks,
M
-Original Message-
From: Brad Ellis [mailto:[EMAIL PROTECTED]]
Sent: Friday, 30
Yes, normal Ethernet straight-through cables
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
H.
Sent: Thursday, August 29, 2002 10:57 AM
To: [EMAIL PROTECTED]
Subject: Re: Help needed on Simline 2 ISDN Simulator [7:52255]
Hello Brad,
Ethernet
so far so good. I installed one for a client, and it worked awesome. I
even dropped it 10 feet, and it still worked!
Brian Wilkins wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I was wondering if anyone else has been experiencing problems with Cisco's
IDS sensor appliance
I'm going to take a punt at this one (i.e. just start typing without
confirming :)...
You should be able to achieve what you want with the time-range command.
With it, you can specify the times that you are interested in. You can then
apply this to the access list that defines the traffic you
Tim, I have a Catalyst 1600 and I had the same problem. Here is the work
around I used:
1) I attached a modem to the console
2 I dialed in
3) I assigning an IP address
3) I disconnected and connected to the switch via telnet
Try this with your 1200 ...
Pierre-Alex
Message Posted at:
Here is how I get around ICQ, AOL, MSN and Yahoo IM blocking:
From work, I Secure Shell (SSH) back to my Linux Firewall. On my work
desktop,
I am running X-server (X-Win32 or Xceed) and just tunnel the SSH encryption
from my Linux firewall back to the corporate desktop. I can fire up any X
interface fastethernet 0/0
backup delay 5 20
backup interface bri0/0
.
interface bri0/0
.
but i am fail!
help me!!!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=52333t=52333
--
FAQ, list archives, and
Are the Cisco sensors signature based or anomaly based? At what data rate
(realized), do they max out and in effect, stop reading signatures? Just
curious since I've not worked with their offerings.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Colin Weaver wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I posted this to the associate group and was told I may have better luck
here. Any help is appreciated.
---
My new laptop has no serial port. Imagine my suprise...
Do you have a PDA? Older Palms work great with
Policy is not a place to put detailed information. it is a place to state
how management feel about the importance of security in the orgazation, and
who should execute further security practices.
Procedure is a detailed step by step on how to do things. Guidelines is a
generic approach of a
Hi guys,
I am having a problem with routing on a Cisco1605 router. Ethernet0 is set
to 10.1.1.17 255.255.255.0 and ethernet1 is set to 10.128.52.1 255.255.255.0
My problem is:
From the 10.1.1.0 network i can ping 10.1.1.17 (ethernet0)
From the 10.1.1.0 network i can ping 10.128.52.1 (ethernet1)
Hi,
No, they are removed in new CID exam (SNA and Appletalk). Now the exam
focuses in IP and ATM issues. I took it in July with score of 860,
thank God, I passed.
Cheers,
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
suaveguru
Sent: Tuesday, July
Is the PC really 10.258.52.101..?
V--
Craig Robertson wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi guys,
I am having a problem with routing on a Cisco1605 router. Ethernet0 is
set
to 10.1.1.17 255.255.255.0 and ethernet1 is set to 10.128.52.1
255.255.255.0
My problem
Where does the 10.258.52.x network reside in your
network? I'm guessing it also uses a 255.255.255.0
mask.
If there is a PC or PC's on one of the 1605 ethernet
segments with a 10.258.52.x address then you will need
to add a secondary IP address to the interface those
devices are off of. This is
Sorry guys, the address of the PC is 10.128.52.101, not 258. Nice typo
hey :-)
Thanks
Vance Krier wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Is the PC really 10.258.52.101..?
V--
Craig Robertson wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi guys,
Is the PC's default gateway set to 10.128.52.1?
Also, check the PCs routing table to see if everything
is ok. netstat -r
--- Craig Robertson wrote:
Sorry guys, the address of the PC is 10.128.52.101,
not 258. Nice typo
hey :-)
Thanks
Vance Krier wrote in message
[EMAIL
Not much studying today. Work was more hectic than usual. After work a
special treat. I had the privilege and pleasure of meeting and spending some
time with another of the Groupstudy Gang.
Over the past couple of years I've met some good folks through this list.
Tonight was no exception. It
I have used a Y cable for the WAN probe for watching my frame relay
connections. Its possible its for that.
Michael
From: Vicuna, Mark
Reply-To: Vicuna, Mark
To: [EMAIL PROTECTED]
Subject: RE: unidentified cisco cable [7:52296]
Date: Thu, 29 Aug 2002 23:15:32 GMT
haha.. no i meant i saw a
I've got a few requests to start a Vegas Cisco users group. If you are
interested, please shoot me an e-mail off list.
thanks,
-Brad Ellis
CCIE#5796 (RS / Security)
Network Learning Inc
[EMAIL PROTECTED]
www.optsys.net (Cisco hardware)
Message Posted at:
74 matches
Mail list logo