Are the standard LRP (2.9.8) images going to be maintained still? For those
of us still using the 2.0.x kernel based LRP's?
Thanks Much!
CK
___
Leaf-user mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/leaf-user
!
Chris Kulish
___
Leaf-user mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/leaf-user
ased image.
Thanks Much!
Chris Kulish
___
Leaf-user mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/leaf-user
addresses, I would be required to reboot/kill -HUP(?) the
router as well. Before, I was just changing the IP to match that of the
original box while it was offline.
Thanks for any info!
Chris Kulish
___
Leaf-user mailing list
[EMAIL PROTECTED]
http
uot;no more proccesses available on that
runlevel" and then the system freezes.
What can I do about this?
Thanks for your help,
Chris
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = So
ried a new image of Dachstein and set it up to not use a static
external IP address and same thing.
What else can I try?
Chris
---
This SF.NET email is sponsored by: Thawte.com
Understand how to protect your customers personal information by
> Feb 4 17:29:52 Nimrod kernel: Packet log: input REJECT eth1 PROTO=17
> 10.10.10.2:4813 10.0.0.14:161 L=84 S=0x00 I=58236 F=0x T=128 (#39)
This is a machine broadcasting/requesting SNMP service. Are one of
your boxes managing the ouside router or being polled for SNMP info?
The only thing
Thanks, Brad
> > > Feb 4 17:29:52 Nimrod kernel: Packet log: input REJECT eth1 PROTO=17
> > > 10.10.10.2:4813 10.0.0.14:161 L=84 S=0x00 I=58236 F=0x T=128 (#39)
> >This is a machine broadcasting/requesting SNMP service. Are one of
> >your boxes managing the ouside router or being polled for S
likewise
c) You have copied their original email to the whole list yet again.
I suggest you just hit the delete button in future and leave the
administrators of the list to filter this stuff out as best they can.
Chris
___
Leaf-user
ng people log in as root. (Can
anyone advise on this?)
If anyone would like to see the related config files, holler and I'll send
them rather than spam everyone right now.
Chris Jones
>Hello all,
>
>I am running an Eigersteinbeta variant with PPPOE. I want to be able to
add an incomi
floppy to the CF card (should be c: under DOS).
Next "syslinux c:". (In my experience, setting up syslinux works best
from DOS.)
Good luck,
Chris
On Mon, 9 Jul 2001, Ricardo Kleemann wrote:
> Date: Mon, 9 Jul 2001 12:04:49 -0700 (PDT)
> To: [EMAIL PROTECTED]
> From: Ricar
Linux has all the tools needed (not sure about marking the partition
bootable though).
My personal preference on this sort of thing is a DOS boot disk
(created from Win9x).
Chris
On Mon, 9 Jul 2001, Ricardo Kleemann wrote:
> Date: Mon, 9 Jul 2001 13:20:29 -0700 (PDT)
> To: Chris Ca
I forgot about syslinux.cfg :)
>From memory, I can't think of anything else that needs to be tweaked.
I don't have my LRP box here, so I can't look. What's the actual
message you get?
Chris
On Mon, 9 Jul 2001, Ricardo Kleemann wrote:
> Date: Mon, 9 Jul 2001 14:04:
and out of the LRP for
protocol 50 (ESP).
Can anyone help me understand that if I get these two things working, then a
IPSec, VNP client on my private net, can establish and tunnel IPSec traffic?
Thanks!
Chris Hackett
___
Leaf-user mailing list
[EMAIL
your
rules that allow UDP port 500 and protocol 50? I'm thinking my syntax is
messed up.
Thanks again Rich...
Chris Hackett
-Original Message-
From: Richard Burt [mailto:[EMAIL PROTECTED]]
Sent: Monday, October 01, 2001 3:37 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sub
Hey Rich,
Thanks so much for the help. I built a new disk, and everything seems
to be working now! Thanks again for helping me out. I really appreciate
it.
Chris Hackett
-Original Message-
From: Richard Burt [mailto:[EMAIL PROTECTED]]
Sent: Monday, October 01, 2001 5:38 PM
To
Gosh. I hope they're alright. I use a couple of them in a production
web-store environment. If anyone hears anything, please post.
Thanks!
Chris Hackett
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Michael D.
Schleif
Sent: Wednesday, Novemb
lp me understand what documentation actually applies
to
me and which docs are just confusing me, I sure would appreciate it :)
Thanks so much...
Chris Hackett
___
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
need to build a new modules.lrp ?
Thanks!
Regards,
Chris Dean
___
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
If I change kernels do I need to build a new modules.lrp ?
>
> If you're changing major kernel 'flavors', it would be the wise thing to do.
> The Dachstein disk images use the 'small' kernel branch.
Thanks again! Do you know of a doc on how to package up modules
en quickly insert the floppy in A: the
system boots fine and loads the .lrp files from the floppy.
- At the linux prompt I then try to mount /dev/hda1 by hand I get the
same VFS error.
Any advice or pointers would be appreciated, as I'm pretty stuck.
Regards,
Chris Dean
loadlin.cfg
=
Thanks for the tips. Unfortunately, mounting the other devices didn't
work. I'll try using Linux fdisdk and see if that helps.
Regards,
Chris Dean
"Charles Steinkuehler" <[EMAIL PROTECTED]> writes:
> > - If I boot from C:, but then quickly insert the floppy i
I used the linux fdisk and everything worked great! Thanks for your help.
When I ran fdisk it did complain that the partition did not end on the
proper cylinder boundary, which may explain the problem. Like I said,
erasing everything and rebuilding the partition worked fine.
Regards,
Chris
Hi again group,
I'm attempting to get 2 vlan interfaces to configure on boot with
the latest bering. I have read the documentation on the debian style
interface file. I thought the 'pre-up' option would do what I wanted
(run '/sbin/vconfig add eth1 2' command before bring up the interface.
hi Miguel.
I've been using 'bering_1.0-rc[2,3]' to firewall and route my
company's lan for about 8 mo. It works flawlessly. There are
Instructions for making a bootable CD in the documentation at
sourceforge. It will be faster than RH on a 486 because it doesn't use
the hard drive but be
Hey Miguel,
The modules will depend on what chipset your ethernet cards are. I
have been using intel pro100's (a very nice card) and the module is
'eepro100.o'. A good way to determine which module to use is put in a
recent (7.2,7.3) redhat cd or boot disk and see which modules it loads.
Hi again group,
I'm attempting to use leaf (bering) as a recovery disk to do
"bare-metal" recoveries from amanda. I see that most of the modules are
available (ext3, eepro100, tlan) but I need one for the compaq
"SmartArray3200". The RedHat 7.2 module is "cpqarray.o". I also need to
make
advice
would be greatly appreciated.
Regards
Chris Martin
Tempest Technology Ltd
---
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refc
bering--your private lan (honey pot)
|
|
schools lan
If your dead set on a VPN use IP/Sec. It's supported by the Free S/WAN
project for linux and Bering.
good luck
chris
>Fro
own a
malice user on the internal network.
chris
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
leaf-user mailing list: [
27;road warrior' connections when they conect via ipsec.
I've done some reading and Koon Wong's dhcrelay.lrp package seems
to be what I am looking for. Does anyone know of any good docs, or has a
working config that they can let me 'cheat
websites/resources.
They are essentially demanding that I provide external resource access
while they are connected via ipsec.
Can anyone provide some input?
TIA
Chris
---
This sf.net email is sponsore
port 514 to the syslog host
I am stuck on a win2k network, so I have 'kiwisyslog' service
running under Win2k. Works great. If you have linux server, even easier.
HTH.
Chris
On Wed, 6 Nov 2002, Alby wrote:
>
>
>
> I think the logs
cerned about security. (I even disable the web interface to the cisco switches behind my firewall.)..
If your dead set on these requirements Look into Windows...
chris
I am looking for an ALL-IN-ONE solution similar to the software that is used
on the 3Com internet/server appliance that was dis
worked fine in the past.
Thanks for any help on the matter!
Chris
---
This SF.net email is sponsored by: Get the new Palm Tungsten T
handheld. Power & Color in a compact size!
http://ads.sourceforge.net/cgi-bin/red
er doesn't appear to
have issues when reading the data.
Chris
- Original Message -----
From: "Chris Cranford" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, December 01, 2002 2:51 AM
Subject: [leaf-user] Floppy Image Problems
> I have downloaded the v1.0 s
anyone explain to me what I haven't done to get su
to allow my user to change roles to "root".
Thanks
Chris
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
idn't support
CD-R. Guess that's the problem when you try to use stuff that's really too
old...
Thanks for the help!
Chris
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = S
e a driver from the
source code rtl8139.c, then copy it to /lib/modules/2.2.14-5.0/pcmcia then
edit the /etc/pcmcia/config file and the linuxconf. How do I do this? or,
is there an easier way to get around this?
Chris
---
This SF.NE
Great! Thanks for the confirmation. I'm running into another issue though,
when I run the unmount /mnt command after making changes to config files on
the floppy I get the following msg:
Unmount: not found
Did I burn a bad copy of the CD or is there something I'm doing wrong?
Chris
Okay, I'm an idiot =)
Thanks for all the answers received and all your patience with an obvious
newbie!
Chris
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
slinux with grub entirely (I think I can), and if so, how do I do it?
Thanks and best regards,
Chris Buxton
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
copied the data from
syslinux.cfg into the grub command line interface (using grub on a
floppy), and it worked great.
- Chris
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www
Just checking,
so all I have to do then is uncomment the pci-scan line and add another
line that says rtl8139 and it should work?
Thanks,
Chris
At 03:49 PM 1/8/2003, you wrote:
You should not have to compile anything. The module is already on the CD.
Just edit the file /etc/modules to declare
Okay, these two messages are the requested output files. This first one is
the output when I followed only the initial setup and added ssh. The next
message will be the output when I set it up to use a static external IP
address.
Thanks for the help,
Chris
Leaf Distribution:
dachstein-cd
This message is the output when I set it up to use a static external IP
address.
Thanks for the help,
Chris
Leaf Distribution:
dachstein-cd-v1.0.2
uname -a:
Linux Nimrod 2.2.19-3-LEAF-RAID #4 Sat Dec 1 17:27:59 CST 2001 i386 unknown
ip addr show:
1: lo: mtu 3924 qdisc noqueue
link
Thanks for the help so far, and for helping me along as I limp through
this. Here is how the physical setup goes:
T1 to Adtrans (provided by our ISP which handles DHCP)
This goes to a 3Com Superstack II hub
From there we currently lease out 4 lines and connect our own LAN.
Some of the leased lin
Todd,
Why do you want the Bering box to make the PPP connection to your ISP
instead of the router? I have the same router with BellSouth DSL in Raleigh
and would like to help, but I guess I am not clear on what you are trying to
accomplish.
Chris Blackmon
> -Original Message-
>
o use "ipsecnat"
for the TYPE column in the Shorewall Tunnels file.
I have a Bering-FreeS/WAN Net-to-Net VPN using BellSouth DSL (dynamic IP and
a Cayman) on one end and a T1 with a static IP on the other end and it works
great.
Chris
> -Original Message-
> From: Todd Pearsall [ma
I've searched the archives, but the only thing that looked helpful to me
was the following:
"Dachstein and its predecessors block private ips by default. In Dachstein
you can just comment out the line that denies these It is in
/etc/ipfilter.conf - under stopmartians procedure # RFC 1918/1627/1
Ray, thanks for working with me on this.
Chris -- Your routing table is sufficiently a mess that your problems are
probably a by-product of that.
I'm not even sure how to edit the routing table. The only thing I did was
th initial configuration (load the rtl8139 modules for my NICs, se
Now that I check it, the ip for eth0 changed overnight--unless someone
rebooted the firewall when I wasn't here. it's new ip is 192.168.1.38 which
I can successfully ping from both the firewall and NT.
But I still can't ping past it to 208.57.96.252 (on the NT is says "Request
timed out" on the
After rebooting sometimes I can't ping the firewall or log in via ssh, even
if I didn't change any settings. Is this normal?
A. The "external" ISP's router is on network 192.168.1.0/24 and
provides DHCP leases for at least a portion of that network.
B. The Dachstein router is conf
That'll teach me to send replies before checking email...
Now I updated some settings per Charles' email as follows:
dhcpd daemon config:
subnet 10.10.10.0 netmask 255.255.255.0
dnscache:
LRP internal IP--10.10.10.254
querying hosts IP's--added 10.10
hosts.allow
added--ALL: 10.10.10.0/255.255.2
I'm back at work for the week now so I'll try the suggestions you guys gave
since Thursday. In the meantime, I moved the firewall to a more accessible
location and reconnected it with new cables. Now I get the following msg
popping up every few seconds:
eth0: rtl8139 Interrupt line blocked, sta
to assign eth0 a
static ip.
3) How do I enable the weblet application? I changed the settings in the
weblet package: SERVER_NAME and SERVER_ADDR to both be 10.10.10.254 to
match the eth1 address. I also changed the CLIENT_ADDR to 10.10.10. but so
far I've been una
Thanks to Steve the weblet is now running. I had 10.10.10.0/255.255.255.0
added in the hosts.allow files, but didn't realize I also had to add
10.10.10./255.255.255.0 as well.
(a) port forward traffic to port 25 on the LEAF router to the
10.10.10.x mail server
(b) have the ISP r
My log file from Dachstein is getting packed with messages like this:
Feb 4 17:29:52 Nimrod kernel: Packet log: input REJECT eth1 PROTO=17
10.10.10.2:4813 10.0.0.14:161 L=84 S=0x00 I=58236 F=0x T=128 (#39)
Feb 4 17:29:52 Nimrod kernel: Packet log: input REJECT eth1 PROTO=17
10.10.10.2:4814 1
If your overall LAN setup is simple enough, this will work. Since this
approach "double NATs" all the traffic (first by the LEAF router; second
by the ISP someplace), there is always some risk that something you
implement will run into a rare problem. Worry most about things that you
are port
Okay, today I'm trying to get our Exchange 2000 mailserver online behind
the firewall.
Currently mail is set to go straight from our ISP's router to 192.168.1.2
(the ip address of our exchange server)
I'm trying to do a minimal amount of work to get the firewall in between
the ISP's router an
It needs to be 192.168.1.2 to match the address the mail is being
forwarded to.
I'll give it a try.
Have you loaded the portfw module???
under the modules menu, ip_masq_portfw is uncommented. is there something
else that needs to be done to get it to load?
--
Removing the "-l" in the 10.0.0.0/8
rules in ipfilter.conf will stop the logging regardless.
I could only find three instances of 10.0.0.0/8 in the file. one was
commented out, and the other 2 didn't have a "-l". Is there another
instance I'm missing?
# RFC 1918/1627/1597 blocks
# $I
> >It needs to be 192.168.1.2 to match the address the mail is being
> >forwarded to.
> I'll give it a try.
Didn't work. Still can only send, not receive.
> >Have you loaded the portfw module???
is it listed in the "lsmod" command?
Yep.
modulepages used by
ip_masq_portfw
Apologies for the typo in my previous messages. My two problems haven't
gone away--1) Exchange server is not receiving internet email and 2)
workstations cannot browse the web. I'm thinking my first problem is
related to Doug's problem under the recent headers: Dachstein Port
Forwarding, but si
EXTERN_TCP_PORTS="0/0_25"
to allow anyone on the internet to send you e-mail, and you'll probably
have a lot better luck.
Did it and still not receiving. Also tried Mike's suggestion to remove the
$ from INTERN_SERVERS="tcp_$192.168.1.2_smtp_10.10.10.200_smtp". Backed up
the firewall and rebo
bootable image, and am wondering if the
group has any recommendations for upgrading or moving to a new image during
this transition?
Thanks All!
Chris Hackett
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://t
these messages even important? Or can they safely be ignored?
Also, after the image laods, when I log into the box, an "ip link" shows
only the 'lo" interface .. no eth0 or eth1 that I can find.
If anyone can point me in the right direction, I'd sur
Just got back to work today after a long weekend and ready to try tackling
this prob again...
First off, was it okay for me to remove the $ from:
INTERN_SERVERS="tcp_$192.168.1.2_smtp_10.10.10.200_smtp" or should I put it
back in?
MX records are the DNS entries that tell remote systems how to
wall until everyone goes home for the night so
I'll have to report back on that later.
Thanks for your help!
Chris
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://t
a new
MTA. Postfix?
Many Thanks,
Chris
Perth, Western Australia
---
This SF.net email is sponsored by:
The Definitive IT and Networking Event. Be There!
NetWorld+Interop Las Vegas 2003 -- Register today!
http://ads.sourceforge.n
r.
The second email server doesn't need to run Exchange so please make
reccommendations on that as well.
If you need any more info to help just ask.
Thanks,
Chris
---
This SF.net email is sponsored by: Etnus, makers of TotalView, The be
1
ne2k-pci4684 3
83905820 0 [ne2k-pci]
Any help would be greatly appreciated.
Chris Hall
---
This SF.NET email is sponsored by: eBay
Great deals on office technology -- on eBay now! Click here:
http://adfarm.med
ome on but
don't blink. How do I know the connection is good, router setup correctly,
etc before I connect my cable modem to the router? The only thing I changed
on the router was to uncomment the 3C509 line in the module conf file,
backup and reboot.
Thanks
Chris
Below is the messages log:
ytes target prot opt in out source
destination
0 0 dynamicall -- * * 0.0.0.0/0
0.0.0.0/0
/snip
Thanks
Chris
---
This SF.Net email is sponsored by: INetU
Attention Web Developers & Cons
[EMAIL PROTECTED]
> Sent: Wednesday, June 25, 2003 12:18 PM
> To: Somerlot, Chris; [EMAIL PROTECTED]
> Subject: Re: [leaf-user] Re: Trouble getting started
>
>
> I don't remember what dist you're running, but I assume it's
> a recent one
> with Shorewall?
>
I've tried 2 different sets of ISA 3C509 cards, get the same problems. I'm
not sure the cards are setup right. My ioports shows this for the cards:
0300-030f : 3c509
My interrupts shows:
CPU0
0: 128443 XT-PIC timer
1:881 XT-PIC keyboard
2:
ff:ff
inet 192.168.1.254/24 brd 192.168.1.255 scope global eth1
The cards have worked in other machines. I just can't seem to figure out the
troubleshooting steps for this.
Thanks in advance.
Chris
---
This SF.Net email sponsored by: Fre
TCP/IP is working,
I know the cable is good, and tried using a static ip on the machine
connected to Bering. Can't get bering to communicate with the other machine,
or vice versa. Can anyone tell me a next step?
TIA
Chris
---
This SF.Net email
coming from ranges (esp. RFC1918 addresses) which they
don't provide.
It took a little work moving files around to get dhclient.lrp working on
wisp-dist but it was otherwise uneventful.
Chris
---
This SF.Net email sponsored by: Free
5.255.255.255
result: still filling logs.
I understand that the stuff in my logs has to do with renewing my IP address to my
ISP. My ISP is Comcast cable.
Chris.
---
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Dat
st comfortable with Dachstein. I've been attacking this
problem for at least a month.
Does anyone have any idea how to properly get this working?
-chris.
---
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Dat
?
Chris.
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
leaf-user mailing list: [EMAIL PROTECTED]
https
I believe the line should read:
DNAT net loc:192.168.1.200 tcp 1" added
(take out :10000)
chris.
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Tom Harr
> Jakobsen
> Sent: Wednesday, September 03, 2003 5:16 AM
> To: [EMA
any clues as to what I might be doing wrong?
Chris
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
leaf-user mailing list: [
swer is to change the IP addresses on our LAN, but
what happens when the next remote client is in the same situation?
If the only resort is to change IP address space on our LAN, what is
recommended to avoid this 'clash' in the future.
Any thoughts appreciated,
Chris
--
Chris Carbaug
dev tun1
I'm stretching my knowledge of routing here, so please set me straight.
Thanks for any help, and to those who replied previously.
Chris
--
Chris Carbaugh
Network Administrator
[EMAIL PROTECTED]
Leer Electric Inc.
www.LeerElectric.co
tate
insmod: unresolved symbol pci_drv_unregister
insmod: unresolved symbol pci_drv_register
#uname -a
Linux firewall 2.4.24 #3 Sun Feb 22 19:25.40 CET 2004 i586 unknown
Any Hints?
Regards,
Chris Lee
---
This SF.Net email sponsored by Black
III card ? Look for another module which is
similar...
Yes, but cannot found any similar module... Any Hints?
Or should I upgrade to beta version or degrade to 2.1.11 version?
Regards,
Chris Lee
---
This SF.Net email sponsored by Black Hat
Dear Luiz Farias,
Thanks for your modules files: ^_^
However, everytime I reboot the computer, the files will missing from HDD
and the /etc/modules undo the changes.
Beside, how to backup modules.lrp?? Do I need to delete if after backup?
Regards,
Chris Lee
> You will need to add (in
eth1
10.1.60.0 10.1.10.2 255.255.254.0 UG0 00 eth1
10.1.30.0 10.1.10.1 255.255.254.0 UG0 00 eth1
Regards,
Chris Lee
---
This SF.Net email sponsored by Black Hat Briefings & Trai
Thanks for answering Question 2, here come the new question:
Does Bering provide traceroute like function?
Regards,
Chris Lee
---
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, L
dev eth1
up ip route add 10.1.60.0/23 via 10.1.10.1 dev eth1
Doc Ref:[EMAIL PROTECTED]://snafu.freedom.org/linux2.2/docs/ip-cref/ip-cref.html
Regards,
Chris Lee
> 3. Routing Table - Gateway
> How to set gateway beside default gateway?
>
> Here is the routing table for my RedHat box:
found
/etc/openvpn/openvpn.conf file
If I issue openvpn command, system return:
openvpn: not found
Any Hints?
Regards,
Chris Lee
---
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Train
not found error.
Regards,
Chris Lee
---
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
un
Hi,
Can anyone kindly to send an old version of OpenVPNZ package, as the one on
the web seems broken.
Many Thanks in advance.
Regards,
Chris Lee
---
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Brief
204840 2008 2% /var/log
Many thanks in advance.
Regards,
Chris Lee
---
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http
0 seconds
Why the date command show the incorrect time?
Pls kindly advise.
Regards,
Chris Lee
---
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop
Rev 1
Many thanks in advance.
Regards,
Chris Lee
---
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&a
Dear M Lu,
I think no problem for me to setup multi .conf for multi tunnel.
But how to start up multi openvpn process at startup?
Pls kindly advise.
Regards,
Chris Lee
---
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java
Hi,
How to upgrade Bering-uClibc 2.2-rc1 from 2.2 beta5?
PS: I have using HD version.
Regards,
Chris Lee
---
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few
1 - 100 of 129 matches
Mail list logo