Re: [newbie-it] Cerco drivers modem rockwell
Salve a tutti, ho sentito che è difficile installare un winmodem del genere rockwell softmodem (chipset conexant). [CUT] problema è il modem, chi ha la risposta giusta al mio problema sarei felice che la pubblicasse. Grazie Claudio http://www.linuxdoc.org/HOWTO/Conexant+Rockwell-modem-HOWTO/index.html Ciao Marco
[newbie-it] Cancellazione mainlist
Cancellazione servizio maillist Guerra Antonio [EMAIL PROTECTED]
Re: [newbie-it] Rockwell/Conexant modem
Ciao Luigi. Ho seguito il tuo consiglio, ma è evidente che ho installato come modem il principe dei figli di p... Nessun cambiamento, il modem si limita, secondo kppp ad essere occupato... Grazie lo stesso. Fabio - Original Message - From: Luigi De Pascale [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, December 03, 2001 1:07 PM Subject: Re: [newbie-it] Rockwell/Conexant modem On Sun, 2 Dec 2001, Fabio Manunza wrote: Salve a tutti. Installato nel mio computer ho uno dei maledetti Winmodem. HardDrake sentenzia che trattasi di HCF Rockwell etc., etc., condannandomi così, non essendo ancora disponibili i driver dedicati, al mutismo linuxiano ed obbligandomi all'utilizzo di IE. Dall'analisi di sistema di Winz invece, risultano essere caricati i drivers per l'HSF per il modem Conexant Softk56 Data,Fax,Voice,Speakerphone PCI. Da qui il primo conflitto. A chi dare ragione? A questo punto ho scaricato i drivers per l'HSF, presumo di averli installati in maniera corretta ed il risultato è che, cercando di collegarmi, mi viene comunicato che spiacente il modem è occupato. Il modem è montato su COM3/ttsy2; provando a cambiarne l'indirizzo (COM1-COM2) il messaggio è impossibile raggiungere il modem. Nel caso non fossero stati i driver adatti al mio modem sarebbe stato questo il comportamento? E nel caso che ciò indichi che invece i driver sono compatibili come posso risolvere questo problema? Ringraziamenti anticipati a chi vorrà aiutarmi. Fabio Ciao, non sono molto esperto del tuo tipo di Modem. Io ho un Lucent. Il fatto che ti risponda modem occupato potrebbe essere un buon segno. Succedeva anche a me. Lo ho risolto inserendo delle virgole nel numero. Per esempio se il numero da comporre e' 0508447x7 io inserisco: ,,050,,8447x7 Stranamente le virgole gli danno tempo di respirare. Fammi sapere che succede. Ciao Luigi -- Not all who wander are lost (Tolkien) Luigi De Pascale: Indirizzo: Dipartimento di Matematica Applicata U.Dini Via Bonanno Pisano 25/B, 56126 Pisa, ITALY Tel.: +39/050/844745 E-mail: [EMAIL PROTECTED]
Rif: Re: [newbie-it] mdk8.1 e audio
Io ho provato a rinominarla da dev suond a dev audio ma mandrake non si è più avviata. Sarà, ma più passano le versioni e più i problemi aumentano. saLuti Da: Mauro Ongaro [EMAIL PROTECTED] Data: 03 dicembre 2001 22:35:15 A: [EMAIL PROTECTED] Oggetto: Re: [newbie-it] mdk8.1 e audio Ciao Ragazzi, da neofita come voi, per la prima volta e con grande soddisfazione, ho scoperto da me, come far funzionare le schede audio che su mdk 8.1 sembra abbiano alcuni problemi !!! Purtroppo sembra un errore ( o piu ) di Mandrakesoft. Per passare al succo della faccenda, bisogna modificare il nome della directory di dispositivo ( device ) e cioé: da /dev/sound in /dev/audio. TUTTO QUI. Sicuramente la scheda audio viene rilevata in fase di installazione del SO, ma quando si vuole usare il dispositivo, questo non viene trovato perche si trova in un percorso diverso, da cio' il non funzionamento del dispositivo. Spero di essere stato di aiuto ed esatto. Saluti a tutti da Mauro Non riproduce nessun suono, ne di kde, gnome C. tantomeno cd o mp3, completamente muto! Ho controllato il bios e PnP OS Installed è disabilitata. La scheda la riconosce nel setup di installazione (senza darmi modo di verificarla o sostituirla, ma cmq. il driver è lo stesso utilizzato dalla mdk 7.2, ora c'è la mdk 8.1!) e viene riconosciuta anche con harddrake, solo che quando provo a cambiare tipo di modulo (sempre della serie yamaha) non viene riprodotto il file campione, con nessun modello, e sono gli stessi tra la 7.2 e la 8.1non riesco a capire pecchè non fà!... ... dubbio ... Hai verificato i livelli audio? Nel menu K - Multimedia - Suono trovi l'applicazione Mixer sonoro. Controlla che i livelli del volume non siano a zero... Altrimenti, prova ad usare sndconfig dalla console di root. Daniele
Re: Rif: Re: [newbie-it] mdk8.1 e audio
Cosa hai fatto esattamente ? Io ho provato a rinominarla da dev suond a dev audio ma mandrake non si è più avviata. Sarà, ma più passano le versioni e più i problemi aumentano. saLuti
Fwd: Re: Rif: Re: [newbie-it] mdk8.1 e audio
Cosa hai fatto esattamente ? Io ho provato a rinominarla da dev suond a dev audio ma mandrake non si è più avviata. Sarà, ma più passano le versioni e più i problemi aumentano. saLuti ---
Re: [newbie-it] Modem interno
Il 15:45, martedì 4 dicembre 2001, hai scritto: io ho un Acer Extensa 500T, ma il kernel e' il 2.4.2 Ci sono problemi? Grazie No, nessun problema. Ho il driver per il 2.4.2. Se vuoi te lo mando. Ciao Sandro -- Dr. Sandro Porrazzini Linux Mandrake 8.0 Linux Machine: 103048 Linux User: 203143
[newbie] IP settings
How do I manually set or change my IP thru the terminal? Does it have something to do with ifconfig? Thanks. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Top posting poll
Well done, Dan. Underlying message is common sense prevails! Ron. --- Dan Jacobs [EMAIL PROTECTED] wrote: Well, the tide of messages regarding all of your opinions has ended, and I am happy to report the following, in order, winners: 1. Top posting ok 2. Please change subject line when replying and changing main point of previous message 3. Please snip replies 4. Please bottom post to keep better track of replies I didn't even give the suggestion for numbers 3 and 4, but they were sent to me, so I included them. Like I said when I started keeping track, I didn't do this to try to change the way anyone does anything here, just thought if we all knew what other wanted to see, we could make this list even more effective and easier to navigate Diesel Dan http://DieselDan.net __ Do You Yahoo!? Buy the perfect holiday gifts at Yahoo! Shopping. http://shopping.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] netword card
Hi, I post my message again since I haven't received any response and I haven't resolved the problem. I have got a notebook with a combo 3c575cT network card. The card is recognised by Mandrake 8.0. When I try to ping myself, the data packets aren't send. When I configure manually the IRQ and the I/O parameters, the packets are sent but lost. Has someone an idea to solve this problem ? Thank you Fred Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Installation problem
I have Dell inspiron 3800. Have had Linux mandrake 7.? (1?) on it before without any problem. Tried now to install LM 8.1, and I am not able todo it. It hangs whenit tries to use the CDROM (But it is able to use it before.Strange..) Can anyone please help me? Here comes what I think is relevant of kernel messages: 4 ide0 BM-DMA at 0x860-0x0867, BIOS settings: hda:DMA, hda:pio 4 ide1 BM-DMA at 0x868-0x086f, BIOS settings: hda:DMA, hdc:pio hdc: SONY CD-RW CRX700E, ATAPI CD/DVD-ROM DRIVER 4VFS: Mounted root (ext2 filesystem) 4hdc: ATAPI 24X CD-ROM-RW drive, 8192kB Cache, DMA 6Uniform CD-ROM driver Revision: 3.12 6SCSI subsstemdriver Revision: 1.0 7ISO 9660 Extentions: RRIP_1991A 4hdc: cdrom_decode_status: status=0x51 {DriveReady SeekComplete Error } 4hdc: cdrom_decode_status: status=0x34 4hdc: cdrom_decode_status: status=0x51 {DriveReady SeekComplete Error } 4hdc: cdrom_decode_status: status=0x34 4ide_dmaproc: chipset supported ide_dma_lostirq func only: 13 4hdc: lost innterrupt 4ide_dmaproc: chipset supported ide_dma_lostirq func only: 13 4hdc: lost interrupt And continuing. Tries also to reset ATAPI and disable DMA
Re: [newbie] IP settings
At 03:15 04.12.2001 -0500, you wrote: How do I manually set or change my IP thru the terminal? Does it have something to do with ifconfig? Thanks. yes it does have something to do with ifconfig, read the manual page for ifconfig - it will tell u all the available options. --qu Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Alternative to QuickTime
The best alternative to Quicktime I have found is ... Quicktime.. It can be made to run under Linux using the codeweavers crossover plugin available from www.codeweavers.com. Crossover is a wine application and enables you to run native windows plugins including Microsoft Powerpoint/Word/Excel viewers. Installation is a real breeze and it works either standalone or as an embedded plug in in Netscape, konqueror, Opera, Galeon and Mozilla. The downside? Well its not free. The crossover plugin will cost you $29 (but that money does help to support the Wine development) You can use it without paying, but every 30 seconds or so a window pops up begging for money. (Doesn't stop me using it that way though) HTH Derek On Tuesday 04 December 2001 02:38, you wrote: Guys, what's the best alternative to QuickTime ? Ran into a site that requires QT but problem is that its only available for Windoze and Mac... /thanks Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Internet connection sharing
At 17:57 04.12.2001 +1100, you wrote: I have just dedicated one of my machines as a Linux server. Installed Mandrake 8.1 and chose server partitioning. Almost everything works great! That is it does immediately after I set up internet connection sharing, but after a server reboot I can no longer use the shared connection until I configure it again. i.e. I use the wizard in DrakConf. It tells me that this is already configured. I click on the Configure button anyway and it reruns the scripts and everything works again. Reboot and it's no go. It's a dialup connection and it still dials OK - is then accessable from the server, but not to the client machines. I'm planning to do the server tutorial stuff and learn what's behind the wizard, but right now I need a quick fix (don't we all!), or at least a starting point on where to look for a diagnostic. As always, any help is much appreciated. cheers /Brian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com hmmu could try to locate the script that runs behind the wizard by searching for it in the /etc/rc.d/ path. as internet connection sharing is done by ipchains or iptables (as long as u do masquerading and not caching - and i assume u use masquerading) there should be ipchains/-tables commands in the script that sets up the internet connection sharing. so try to grep for all ipchains/iptables commands located in scripts in the /etc/rc.d/ path: grep ipchains /etc/rc.d/* or grep iptables /etc/rc.d/* if u use iptables. this will give u an output for all scripts in this path that have ipchains or iptables in it. maybe u are able to find the responsible script this way. this is only a guess - i really dont know what the wizard does - since i do almost everything in console... give it a try --quaylar Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] FTP Problem - Please help if you can thanks :)
Hi all I have proftpd setup at home and here at work i'd like to access it. At home I tried it out and it works fine over the home network... using cuteftp here at work produces the following log... basically it hangs a while on Connecting data socket... and then says Failed to establish data socket. What is causing this? I've changed the actual IPs concerned to IP addresses here... just in case - am paranoid! :) Thanks for any help Neil PS I also use apache to serve pages and that's working np. STATUS:Connect: Monday 14:07:46 12-03-2001 STATUS:Connecting to IP addresses here STATUS:Connecting to IP addresses here (ip = IP addresses here) STATUS:Socket connected. Waiting for welcome message... 220 ProFTPD 1.2.2 Server (ProFTPD Default Installation) [nrpmedia] STATUS:Connected. Authenticating... COMMAND: USER neil 331 Password required for neil. COMMAND: PASS 230 User neil logged in. STATUS:Login successful COMMAND: TYPE I 200 Type set to I. COMMAND: REST 100 350 Restarting at 100. Send STORE or RETRIEVE to initiate transfer. STATUS:This site can resume broken downloads COMMAND: REST 0 350 Restarting at 0. Send STORE or RETRIEVE to initiate transfer. COMMAND: pwd 257 /home/neil is current directory. COMMAND: TYPE A 200 Type set to A. STATUS:Retrieving directory listing... COMMAND: PASV 227 Entering Passive Mode (IP addresses here). COMMAND: LIST STATUS:Connecting data socket... ERROR: Failed to establish data socket -- [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Alternative to QuickTime
speaking of wine, are there any quick pointers on how best to use it ? I have a pure linux environment and must I partition it for windoze ? Ideally would like to run on my existing linux partition. Any HOW-TOs, tips would be appreciated thanks. Derek Jennings wrote: 20011204112105.JXCZ3849.mta06-svc.ntlworld.com@there"> The best alternative to Quicktime I have found is ... Quicktime..It can be made to run under Linux using the codeweavers crossover plugin available from www.codeweavers.com. Crossover is a wine application and enables you to run native windows plugins including Microsoft Powerpoint/Word/Excel viewers.Installation is a real breeze and it works either standalone or as an embedded plug in in Netscape, konqueror, Opera, Galeon and Mozilla.The downside? Well its not free. The crossover plugin will cost you $29 (but that money does help to support the Wine development)You can use it without paying, but every 30 seconds or so a window pops up begging for money. (Doesn't stop me using it that way though)HTHDerekOn Tuesday 04 December 2001 02:38, you wrote: Guys,what's the best alternative to QuickTime ? Ran into a site that requiresQT but problem is that its only available for Windoze and Mac.../thanks Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Alternative to QuickTime
I wish there were an 'easy' way to use wine. The easiest ways are to use the crossover plugin, or the transgaming wine implementation. They have been 'tweaked' for their particular purpose and save you the grief. If you were to spend the time you could get wine doing the same things yourself without paying a penny. If you want to use wine yourself then I suggest you do not use the Mandrake rpm, but instead get the wine CVS tree and read everything you find at www.winehq.org Wine does not need any windows or windows partition on the drive. It can use applications already installed in existing windows partitions, but this is not the preferred mode of operation. A pure linux environment is best. So far I have managed to get wine to work playing Counterstrike (menus a bit funny but game play OK), and Quicken (unusably slow and mouse never quite points where you want it) On Tuesday 04 December 2001 11:21, ethan wrote: speaking of wine, are there any quick pointers on how best to use it ? I have a pure linux environment and must I partition it for windoze ? Ideally would like to run on my existing linux partition. Any HOW-TOs, tips would be appreciated thanks. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] I need your immediate help!
Hello gurus! I am using Mandrake 8.1 and I just downloaded the kernel-2.4.13-mdk.rpm and the latest iptables available in the speakeasy.rpmfind.net site. I tried to install the new kernel and iptables using the commands of: # rpm -ivh kernel-xxx.mdk.rpm and # rpm -Uvh iptables-xxx.mdk.rpm but I wasn't able to install those packages. It depends to one another. So I decided to open my kongueror browser and click the kernel first and automatically installed it using RPM Software Manager. And I was asked if I'll forcely install it and I clicked the YES button. And when it was successfully installed, I also clicked to install the iptables package. After I successfully installed the two packages, I reboot my system. And it all started my problem. I wasn't able to enter my Mandrake system. What shall I do? Please help me... Thanks in advance. God bless... __ www.edsamail.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] FTP Problem - Please help if you can thanks :)
At 11:24 04.12.2001 +, you wrote: hi neil, this error indicates that your ftp client was not able to establish a data connection to your home pc at target port 20 (this is ftp-data). so either u have a firewall at work that doesnt allow traffic from/to port 20 or - and this is more likely - u have set up some firewall rules on your home pc that prevent input/output traffic to/from port 20. check your firewall rules - try setting all policies to ACCEPT - and try again connecting from the outside world i.e. your office. if this works - u have a firewall problem. --qu Hi all I have proftpd setup at home and here at work i'd like to access it. At home I tried it out and it works fine over the home network... using cuteftp here at work produces the following log... basically it hangs a while on Connecting data socket... and then says Failed to establish data socket. What is causing this? I've changed the actual IPs concerned to IP addresses here... just in case - am paranoid! :) Thanks for any help Neil PS I also use apache to serve pages and that's working np. STATUS:Connect: Monday 14:07:46 12-03-2001 STATUS:Connecting to IP addresses here STATUS:Connecting to IP addresses here (ip = IP addresses here) STATUS:Socket connected. Waiting for welcome message... 220 ProFTPD 1.2.2 Server (ProFTPD Default Installation) [nrpmedia] STATUS:Connected. Authenticating... COMMAND: USER neil 331 Password required for neil. COMMAND: PASS 230 User neil logged in. STATUS:Login successful COMMAND: TYPE I 200 Type set to I. COMMAND: REST 100 350 Restarting at 100. Send STORE or RETRIEVE to initiate transfer. STATUS:This site can resume broken downloads COMMAND: REST 0 350 Restarting at 0. Send STORE or RETRIEVE to initiate transfer. COMMAND: pwd 257 /home/neil is current directory. COMMAND: TYPE A 200 Type set to A. STATUS:Retrieving directory listing... COMMAND: PASV 227 Entering Passive Mode (IP addresses here). COMMAND: LIST STATUS:Connecting data socket... ERROR: Failed to establish data socket -- [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] gnomeppp pppd daemon dies
I asked this question sometime ago and was advised that if I was using x-screensaver or apache that these could conflict with this type of connection. I basically gave up on it and made kppp work..if ya get gnome ppp to work I'd love to know how you did it :-) Lee I haven't used gnome ppp before (I use kppp), but I was forced to not install kde on a system because the machine has 3 small hd's, the largest is 600M and the other 2 are around 200M or less. So, since the smaller footprint is Gnome, and since the Gnome panel works with Xfce (my favorite small footprint gui), I decided to install it. Setting up the dial-up has been problematic because I'm not familiar with the interface. As far as I can see the setup is correct, however it appears that I have a permissions problem. This problem is not confined to the one Gnome-only system, however--the same error occurs when I attempt to use gnome ppp instead of a working kppp dial-up on other machines. Anyway, I hit the connect button on gnome ppp and immediately a crash message appears that the pppd daemon died unexpectedly. My log files show only that pppd 2.4.0 started by eryl, uid 501 followed by failed to open /dev/modem: Permission denied, followed by Exit. The error message is identical on both the Gnome-only machine and the machines with a working kppp. Can some Gnome guru out there (I know you're on this list) PLEASE tell be what I have misconfigured, and why it's only a misconfiguration with Gnome ppp. Thanks, eryl Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Upgrading kernel-2.4.13-12mdk.i586.rpm problem
Hello, gurus! I am using Mandrake 8.1 and I just downloaded the kernel-2.4.13-12mdk.i586.rpm and iptables-1.2.4-2mdk.i586.rpm available in the speakeasy.rpmfind.net site. I tried to install the new kernel and iptables using the commands of: # rpm -ivh kernel-2.4.13-12mdk.i586.rpm and # rpm -Uvh iptables-1.2.4-2mdk.i586.rpm and vice versa but I wasn't able to install those packages. It depends to one another. So I decided to open my kongueror browser and click the kernel first and automatically installed it using RPM Software Manager. And I was asked if I'll forcely install it and I clicked the YES button. And when it was successfully installed, I also clicked to install the iptables package. After I successfully installed the two packages, I reboot my system. And it all started my problem. I wasn't able to enter my Mandrake system. What shall I do? Please help me... Thanks in advance. God bless... __ www.edsamail.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] SPAM FILTER
I am a new sysadmin for my ISP.. we have a horrible spam problem here, and no one has done anything in the past to resolve it. I have decent linux experience, but i wouldnt exactly call myself a pro.. :) i have been looking into blackmail, but it seems very difficult to install. I was wondering if anyone out there knew of an AWESOME spam filter, that can be used system-wide (for ISP use) and is EASY to install and administer.. can anyone please help me?!?!? :) THANKS! - Matt
Re: [newbie] fetchmail config..
If you press the 'Test' button in fetchmailconf you will see the dialogue between fetchmail and the server. That should tell you what is up. HTH Derek On Tuesday 04 December 2001 14:38, you wrote: Hi all, I have a small fetchmail problem.. I have a .fetchmailrc file in /root that is supposed to check a few mail accounts and make delivery to a few local users.. so the file looks like this (with some detail changes obviously, to hide some confidential info :-) ## set postmaster postmaster set bouncemail set no spambounce set daemon 20 poll mail.vianet.net with proto POP3 user 'frankieh' there with password 'myPassWd' is 'franki' here options fetchall poll pop.mail.yahoo.com with proto POP3 user 'charmaine' there with password 'somechick' is 'charmaine' here options fetchall ## so, my question is this, why does the first email seem to be the only one collected??? the yahoo account doesn't seem to get collected.. anyone know why? Also, since I am running this as a deamon, should I add fetchmail to /etc/ppp/ip-up.local ?? so it starts when the dialup is completed? Any help, suggestions, slander, or anything else would be much appreciated. rgds Frank Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SPAM FILTER
You can try junkbusters this link is from their FAQ http://www.junkbusters.com/ht/en/ijbfaq.html#isps hope this helps John Pisini http://www.cafecomputer.com Registered Linux User #100542 No. Try not. Do. Or do not. There is no try. -- Yoda From: Matt Koppelman [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: Newbie@Linux-Mandrake. Com [EMAIL PROTECTED] Subject: [newbie] SPAM FILTER Date: Tue, 4 Dec 2001 11:12:16 -0500 I am a new sysadmin for my ISP.. we have a horrible spam problem here, and no one has done anything in the past to resolve it. I have decent linux experience, but i wouldnt exactly call myself a pro.. :) i have been looking into blackmail, but it seems very difficult to install. I was wondering if anyone out there knew of an AWESOME spam filter, that can be used system-wide (for ISP use) and is EASY to install and administer.. can anyone please help me?!?!? :) THANKS! - Matt _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SPAM FILTER
Spam Assassin is worth looking at http://spamassassin.sourceforge.net It performs textual analysis of mails and scores them. It also looks up known spammers and includes the Vipul's Razor collective spam database that was featured on Slashdot a couple of days ago. The Perl version is probably a bit slow for ISP use, but they have now introduced a daemon version with ISP's in mind. Here is an example of the header it adds to any Spam mail it finds SPAM: Start SpamAssassin results -- SPAM: This mail is probably spam. The original message has been altered SPAM: so you can recognise or block similar unwanted mail in future, using SPAM: the built-in mail filtering support in your mail reader. SPAM: SPAM: Content analysis details: (16 hits, 5 required) SPAM: Hit! (3 points)Faked To Undisclosed-Recipients SPAM: Hit! (0.1 points) Subject has an exclamation mark SPAM: Hit! (1 point) Subject has lots of exclamation marks SPAM: Hit! (2.7 points) BODY: /SCRIPT.*LANGUAGE.*JavaScript/i SPAM: Hit! (0.7 points) BODY: /on(?:Blur|Error|KeyDown|KeyUp|Load|MouseOver|Resize|Unload)/i SPAM: Hit! (2.5 points) /\n\n.{0,160}!-- saved from urlc SPAM: Hit! (2 points)/click here.{0,100}\/a/is SPAM: Hit! (2 points)Received via a relay in relays.ordb.org SPAM:[RBL check: found relay 135.67.13.61.relays.ordb.org.] SPAM: Hit! (2 points)Received via a relay in relays.osirusoft.com SPAM:[RBL check: found relay 15.35.134.209.relays.osirusoft.com., type: 127.0.0.4] SPAM: SPAM: End of SpamAssassin results - HTH Derek On Tuesday 04 December 2001 16:12, you wrote: I am a new sysadmin for my ISP.. we have a horrible spam problem here, and no one has done anything in the past to resolve it. I have decent linux experience, but i wouldnt exactly call myself a pro.. :) i have been looking into blackmail, but it seems very difficult to install. I was wondering if anyone out there knew of an AWESOME spam filter, that can be used system-wide (for ISP use) and is EASY to install and administer.. can anyone please help me?!?!? :) THANKS! - Matt Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SPAM FILTER
From: Matt Koppelman [EMAIL PROTECTED] I am a new sysadmin for my ISP.. we have a horrible spam problem here, and no one has done anything in the past to resolve it. I have decent linux experience, but i wouldnt exactly call myself a pro.. :) i have been looking into blackmail, but it seems very difficult to install. I was wondering if anyone out there knew of an AWESOME spam filter, that can be used system-wide (for ISP use) and is EASY to install and administer.. can anyone please help me?!?!? :) Give procmail a try. I'm about to set it up for my network as well. I don't actually have it running yet, but I've seen nothing but positive things about it. http://www.procmail.org/ Matt _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] mandrake8.0 and internet
Can anyone tell me where to write my ip, mask, dns numbers to connect to internet?Where is this file or if you could send me for example your file (if you want you can change numbers - i want just example)[EMAIL PROTECTED] Tego nie znajdziesz w ¿adnym sklepie! [ http://oferty.onet.pl ]
Re: [newbie] SPAM FILTER
i dunno.. i dont have THAT much experience.. i've heard procmail is a nightmare to install, i'm looking for something quick, and easy.. - Original Message - From: Matt Greer [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, December 04, 2001 10:36 AM Subject: Re: [newbie] SPAM FILTER From: Matt Koppelman [EMAIL PROTECTED] I am a new sysadmin for my ISP.. we have a horrible spam problem here, and no one has done anything in the past to resolve it. I have decent linux experience, but i wouldnt exactly call myself a pro.. :) i have been looking into blackmail, but it seems very difficult to install. I was wondering if anyone out there knew of an AWESOME spam filter, that can be used system-wide (for ISP use) and is EASY to install and administer.. can anyone please help me?!?!? :) Give procmail a try. I'm about to set it up for my network as well. I don't actually have it running yet, but I've seen nothing but positive things about it. http://www.procmail.org/ Matt _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] mandrake8.0 and internet
there are two methods (or more) but with these, answer your problems: 1. menu k/Internet/dialer kppp/setup or configuration (in this moment i job with RedHat 7.1 and dont remember if in LM 8.o has this name ..) 2. Edit /etc/resolv.conf bye geRcO El Mar 04 Dic 2001 10:41, escribiste: Can anyone tell me where to write my ip, mask, dns numbers to connect to internet? Where is this file or if you could send me for example your file (if you want you can change numbers - i want just example) [EMAIL PROTECTED] -- Tego nie znajdziesz w adnym sklepie! [ http://oferty.onet.pl ] Content-Type: text/html; charset=iso-8859-2; name=Adjuntos: 1 Content-Transfer-Encoding: quoted-printable Content-Description: Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] mulitple desktop managers
did you try the f8 or f9 tty? On Tuesday 04 December 2001 12:44, you wrote: it should not but I still dont see where the second manager went (did it come up?). i thought the loading failed as is implied by the the 'Fatal Server Error'. ciao! On Mon, 3 Dec 2001 21:02:23 +0600 Mark D'voo [EMAIL PROTECTED] wrote: true, it doesn't bother me though, If you are using kde you can press alt-f2 (run command), and type it in there, then you won't see any of the debug info On Tuesday 04 December 2001 21:57, you wrote: On Mon, 3 Dec 2001 20:40:15 +0600 Mark D'voo [EMAIL PROTECTED] wrote: from any command line you can just run: startx -- :1 or if you want three graphic desktops startx -- :2 if you want to run gnome startx /usr/bin/gnome-session -- :1 mark thanks mark but i encountered this while running xfce (it was run using starx and KDE is my default desktop manager). this is a little bit long... thanks! [adiaz@Ronin bin]$ startx -- :1 XFree86 Version 4.1.0 / X Window System snip Fatal server error: AddScreen/ScreenInit failed for driver 0 When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file /var/log/XFree86.1.log. Please report problems to [EMAIL PROTECTED] XIO: fatal IO error 104 (Connection reset by peer) on X server :1.0 after 0 requests (0 known processed) with 0 events remaining. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Realtek 8139 and internet
On Tuesday 04 December 2001 08:04 am, you wrote: Greeting from Poland Linuxmen ! I'm green. Can anyone tell me where to write my ip, mask, dns numbers to connect to internet ? Which file, or maybe your example. If you're in X, load up the mandrake control center. Then Network-Connection-configure. Matt _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Samba file shares problem/oddity
scenario/pre-requisites: --- 1) windows username = myWinUser, password = 12345 linux/samba steps: --- 1) create a linux user: useradd myLinuxUser 2) open up the /etc/samba/smbusers file and add the below line: myLinuxUser = myWinUser * note: myWinUser is really the name of your samba user; this will map your samba/win user to a linux user 3) go to kmenu/configuration/networking/samba (this starts swat) 4) create a password for the myWinUser (samba user) -click on passwords button -for username, type myWinUser -for password, enter 12345 (the same password that myWinUser uses on windows) -click add new user button i believe that this should work. also try posting your samba questions to the samba mailing list: http://lists.samba.org/mailman/listinfo/samba At 14:16 01/12/04 +, you wrote: I have a problem with my samba shares in that if i try accessing them on an NT machine by the netbios name of my linux box, PC104, then i get prompted for a username and password, (if i try using root or guest it says conflicting with existing credentials, any other linux user will just get invalid user / password), but if i go by IP address i can map the drives perfectly fine! Ideally i want each share password protected but i can't seem to get this to work Any ideas ?? cheers Jamie _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] usb magnetic strip readers on linux?
anyone have experience with this? looking to purchase one that has a usb interface. will this work on linux? thanks. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SPAM FILTER
As far as mail sorting, I've found getmail works well and is easier to set up than procmail. You can then feed mail from getmail into a spam filtering program, but I think you'd have to do that with procmail as well. -Paul Well, how did I get here? Schwebel --- Matt Koppelman [EMAIL PROTECTED] wrote: i dunno.. i dont have THAT much experience.. i've heard procmail is a nightmare to install, i'm looking for something quick, and easy.. - Original Message - From: Matt Greer [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, December 04, 2001 10:36 AM Subject: Re: [newbie] SPAM FILTER From: Matt Koppelman [EMAIL PROTECTED] I am a new sysadmin for my ISP.. we have a horrible spam problem here, and no one has done anything in the past to resolve it. I have decent linux experience, but i wouldnt exactly call myself a pro.. :) i have been looking into blackmail, but it seems very difficult to install. I was wondering if anyone out there knew of an AWESOME spam filter, that can be used system-wide (for ISP use) and is EASY to install and administer.. can anyone please help me?!?!? :) Give procmail a try. I'm about to set it up for my network as well. I don't actually have it running yet, but I've seen nothing but positive things about it. http://www.procmail.org/ Matt _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com __ Do You Yahoo!? Buy the perfect holiday gifts at Yahoo! Shopping. http://shopping.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SPAM FILTER
--- Mark Weaver [EMAIL PROTECTED] wrote: Matt, have you looked into setting up some regex's in the SMTP's configuration file. This is one good way to start taking a bite out of all that crap they're sending at your mailservers. snip Could you explain what regex's in the SMTP'S configuration file is? Thanks, -Paul He can be taught! Schwebel __ Do You Yahoo!? Buy the perfect holiday gifts at Yahoo! Shopping. http://shopping.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Still no printing in LM8.1!
Dear All, I have been reading everything and doing everything I can think of to get my Epson Stylus Color to work with LM 8.1. I wrote for help about a week ago and nothing that has been suggested has worked. I even reinstalled LM 8.1 and the exact same thing happened again. The printing worked with the test pages then even worked at first with kword and abiword until I changed the default settings. I noticed that it works as long as I do not try to add xpp or change settings. Unfortunately the default settings are not acceptable so I have to adjust but once I do then the printing stops completely. I have checked files and I get messages such as device or resource is busy. Then when I check the queues they show all of my jobs are processing or pending but nothing prints. I am even tempted to get another printer even though I know it is not the printer. I even tried it again in Windows 98 to make sure and of course it works. I am tempted to put my Windows 95 as dual boot on this machine just to get some printing again. If anyone can help with this I will be very appreciative. Thank you. Sincerely, Marcia Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mandrake 8.1 and webcam
Well i recently bought a Quickcam 3000 PRO from logitech without knowing there support behaviour =/ it is supported starting at kernel 2.4.13 . Since it has Phillips ingredients. Phillips webcams are supported (allmost all AFAIK ) they use the kernel module pwc (so does my logitech ) but dont buy the logitech its a good cam but you will have to wait or hack better support for it . Example: i get the camera working fine with a small picture (nokia-display-size on a 1280x1024 screen res) that is because you need to uncompress the signal to get the resolution higher (it SHOULD support 480x600) but to uncompress you need to compile your own kernel with the module pwcx wich you get at http://www.smcc.demon.nl/webcam/ (a recommendable site ) Recommendable is to use a analog camera and a tv grabbercard (bttv) but ofcourse those are more expensive. Cheers Florian On Monday 03 Dec 2001 10:55 pm, you wrote: Hi All, I'm looking at buying a Webcam for my own use under Mandrake 8.1. What is a good brand that will work reliably. Craig -- - POWERED BY LINUX - Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] XFree upgrade question
On Monday 03 December 2001 12:54, tek1 wrote: how can you easily tell what version you are running? *running* is problematic, but this command will tell you what is *installed* rpm -q XFree86 -- Michel Clasquin, D Litt et Phil (Unisa) [EMAIL PROTECTED]/unisa.ac.za http://www.geocities.com/clasqm This message was posted from a Microsoft-free PC f u cn rd ths, u cn gt a gd jb n nx dmnstrtn Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SPAM FILTER
What I do from my e mail server is to make the file /etc/mail/access (used by sendmail) and in the file called access, you can bounce mail that you don't want, for example my /etc/mail/access file reads liek the one below, however please note that some of the addresses are obscured to protect people, not all on my list are poopybottoms, some are just annoying me temporarily, but from the addresses, ip numbers, or hostnames you can get a jist of the format, but then again, if not, please mail me back and ask me for help like from who do you want to bounce mail back to and stuff. The lines that say ERROR: in them will bounce mail back I think, then you can put in the standard error message or you can think up one of your own razzes hehehe. # Check the /usr/share/doc/sendmail-8.11.6/README.cf file for a description # of the format of this file. (search for access_db in that file) # The /usr/share/doc/sendmail-8.11.6/README.cf is part of the sendmail-doc # package. # # by default we allow relaying from localhost... localhost.localdomain RELAY localhost RELAY 127.0.0.1 RELAY [EMAIL PROTECTED] RELAY [EMAIL PROTECTED]RELAY xxx@RELAY kittypuss.org OK [EMAIL PROTECTED]ERROR:550 We don't accept mail from stupid XX like you mail-out.namezero.com ERROR:550 I hate namezero [EMAIL PROTECTED] ERROR:550 Sorry, I don't like auto-replyers pickabooger.cec.eu.int ERROR:550 Sorry, I don't like auto-replyers [EMAIL PROTECTED] ERROR:550 shove your stupid virus [EMAIL PROTECTED] ERROR:550 Please stop spamming me mm-outgoing-104.amazon.com ERROR:550 Please stop spamming me 202.123.31.186 ERROR:550 Spam has been rejected. [EMAIL PROTECTED] ERROR:550 Spam has been rejected. 61.135.4.203ERROR:550 you success-secrets.org ERROR:550 you and your xxx spam too [EMAIL PROTECTED] ERROR:550 Your mail is not welcome here On Tuesday 04 December 2001 10:59 am, you wrote: i dunno.. i dont have THAT much experience.. i've heard procmail is a nightmare to install, i'm looking for something quick, and easy.. - Original Message - From: Matt Greer [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, December 04, 2001 10:36 AM Subject: Re: [newbie] SPAM FILTER From: Matt Koppelman [EMAIL PROTECTED] I am a new sysadmin for my ISP.. we have a horrible spam problem here, and no one has done anything in the past to resolve it. I have decent linux experience, but i wouldnt exactly call myself a pro.. :) i have been looking into blackmail, but it seems very difficult to install. I was wondering if anyone out there knew of an AWESOME spam filter, that can be used system-wide (for ISP use) and is EASY to install and administer.. can anyone please help me?!?!? :) Give procmail a try. I'm about to set it up for my network as well. I don't actually have it running yet, but I've seen nothing but positive things about it. http://www.procmail.org/ Matt _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com --- - Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] XFree upgrade question
tek1 wrote: hello. i have 2 basic questions abt xfree86: 1. how can you easily tell what version you are running? 2. i believe that i'm running 3.3.6 (because it mandrake software manager, under installed, i found xfree86-server-common 3.3.6), but i'd like to upgrade to 4.1.0. what is the best way to upgrade? it looks like 4.1.0 came with the mandrake installation, as i found xfree86-server 4.1.0 under the installable listing. can i just check this file and the other xfree86 files that have 4.1.0 listed next to them and click install? with that automatically uninstall or upgrade the already installed 3.3.6 xfree stuff? thanks... :) tek1at a console prompt, typing: X -version will return info on the version that is running (X is a link to the executable that is actually running on your system). to change your xserver just type: XFdrake --expert as root, at a console prompt and, as one of the items you can change, you'll have a choice of the available versions of XFree. :) -- Alan Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Installation problem
On Mon, 3 Dec 2001 16:32:24 +0100 Helle Espen [EMAIL PROTECTED] wrote: I have Dell inspiron 3800. Have had Linux mandrake 7.? (1?) on it before without any problem. Tried now to install LM 8.1, and I am not able to do it. It hangs when it tries to use the CDROM (But it is able to use it before.Strange..) Can anyone please help me? Here comes what I think is relevant of kernel messages: 4 ide0 BM-DMA at 0x860-0x0867, BIOS settings: hda:DMA, hda:pio 4 ide1 BM-DMA at 0x868-0x086f, BIOS settings: hda:DMA, hdc:pio Strange, it mentions hda for ide0 (twice) _and_ ide1 ... hdc: SONY CD-RW CRX700E, ATAPI CD/DVD-ROM DRIVER 4VFS: Mounted root (ext2 filesystem) 4hdc: ATAPI 24X CD-ROM-RW drive, 8192kB Cache, DMA 6Uniform CD-ROM driver Revision: 3.12 6SCSI subsstemdriver Revision: 1.0 7ISO 9660 Extentions: RRIP_1991A 4hdc: cdrom_decode_status: status=0x51 {DriveReady SeekComplete Error } 4hdc: cdrom_decode_status: status=0x34 4hdc: cdrom_decode_status: status=0x51 {DriveReady SeekComplete Error } 4hdc: cdrom_decode_status: status=0x34 4ide_dmaproc: chipset supported ide_dma_lostirq func only: 13 4hdc: lost innterrupt 4ide_dmaproc: chipset supported ide_dma_lostirq func only: 13 4hdc: lost interrupt And continuing. Tries also to reset ATAPI and disable DMA Looks like a cdrom hardware problem :( Is this a laptop ? -Frans Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] cups and windows shared printer - stumped
I've been trying for ages (or what seems like ages) to get CUPS to print to a Windows 2000 shared printer. I am stumped. I tried to use kups to configure the printer (since people reported success with kups), but to no avail. The following lines appear in my /var/log/cups/error_log file when I try to print to my default printer, an HP Laserjet 4L: I [04/Dec/2001:14:00:34 -0500] Job 14 queued on 'hp4l' by 'root'. I [04/Dec/2001:14:00:34 -0500] Started filter /usr/lib/cups/filter/pstops (PID 3085) for job 14. I [04/Dec/2001:14:00:34 -0500] Started filter /usr/lib/cups/filter/pstoraster (PID 3086) for job 14. I [04/Dec/2001:14:00:34 -0500] Started filter /usr/lib/cups/filter/rastertoprinter (PID 3087) for job 14. E [04/Dec/2001:14:00:34 -0500] PID 3087 stopped with status 1! I [04/Dec/2001:14:00:34 -0500] Started backend /usr/lib/cups/backend/smb (PID 3088) for job 14. E [04/Dec/2001:14:00:34 -0500] Fatal error: Unable to load PPD file /etc/cups/ppd/hp4l.ppd! The file to which the error messages refer exists and is mode 644. The printer is physically attached to the Windows machine. I have no problem mounting a shared Windows directory on the Linux machine using my Windows network username and password. The command smbclient -L machine-name -U user says the printer is indeed there. I've no clue what to try next. Any pointers? Thanks, Kathy -- For God has not given us a spirit of fear, but of power and of love and of a sound mind. - 2 Timothy 1:7 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] XFree86 gamma adjustment
I need help adjusting the gamma of my monitor. I've tried four methods without success: (1) The man page for XF86Config(5) documents the optional entries Gamma x or Gamma r g b in the XF86Config file which should set the monitor's gamma (x, r, g, and b being between 0.1 and 10.0, default 1). I tried both variants as root but nothing happened either time... but since the man page warns that Not all drivers are capable of using this information, I assume I'm out of luck here. Has anyone had luck with these entries? I have not one but three XF86Config files, not counting backups: /etc/XF86Config /etc/X11/XF86Config /etc/X11/XF86Config-4 I assume that multiple files are to provide different configurations under different circumstances. In any case I edited them all identically. For what it's worth, XFree86 -version reports: XFree86 Version 4.1.0 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 Build Operating System: Linux 2.4.8-5mdkenterprise i686 [ELF] Module Loader present (2) My display adapter is a SiS620, which is supported by XFree86. Just for laughs I downloaded and installed the 620 driver from SiS (yes, they have Linux drivers) but there's no change. (3) The man page for XFree86(1) documents the command line switch -gamma. I normally work in X, so first I tried switching to tty1 with Ctrl-Alt-F1, logging in as another user, and entering XFree86 -gamma 9.0, which returned: Fatal server error: Server is already active for display 0 I thought it was possible to run multiple instances of X, but I clearly did something wrong here. (I'd like to know what, as eventually I will want to have multiple instances... but that's another issue.) Then, I changed my boot configuration to not boot into X, rebooted and logged in, and gave the above command. X hung: the same moiré pattern appeared that always does when X is starting, but hung there. The result is the same when I simply enter XFree86 from the command line without the -gamma switch. (4) From an xterm, I gave the command xgamma -gamma 9.0, which returned: Xserver is running an old XFree86-VidModeExtension version (0.8) Minimum required version is 2.0 I did a web search on the above message but the only hits I found were for dead (404) pages. Ideas, anyone? I'm stumped, and in the meantime I'm stuck with a barely legible display. -- Warren Post Santa Rosa de Copan, Honduras http://www.srcopan.vze.com/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] XFree upgrade question
thank you very much alan :) i really appreciate it. unfortunately, after changing to xfree4.1.0, it didn't really recognize my video card (a card made by a company called msi - has tnt2 m64 support; 3.3.6 has no problems with it) and defaults to a horrendous looking screen (resolution and color). :| 3.3.6 displays very well, but there are ghosts next to some of the areas/icons on the screen. i was hoping that 4.1.0 would fix it, but seems to have made things worse. :( ever experience this? again, thanks a lot for the answers to my questions. :) At 11:06 01/12/04 -0800, you wrote: tek1at a console prompt, typing: X -version will return info on the version that is running (X is a link to the executable that is actually running on your system). to change your xserver just type: XFdrake --expert as root, at a console prompt and, as one of the items you can change, you'll have a choice of the available versions of XFree. :) -- Alan Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Intel or Realtek?
Hi everybody, I need to replace one of my network cards and I was wondering which model would be better between one that has the very popular Realtek 8139 or one that has the Intel 21143 (is that the one called 'Tulip'?). Both are by Intellinet and they are in the cheap and affordable category of product (because I'm on a tight budget right now). Any advice would be appreciated on which would work best under Mandrake and/or Red Hat. Thank you! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Realtek 8139 and internet
Jesli masz XFree mozesz to zrobic z Mandrake Control Center - Network and Internet - Connection. Najlepiej bedzie jesli zostawisz w czasie ustawiania opcje DHCP w ten sposob automatycznie bedziesz mial wszystkie ustawienia OK i praktycznie od razu mozesz dostac sie do sieci. Ostroznie z RTL8139... nie jest to najlepszy nabytek. Tomek Nowinski -- Tego nie znajdziesz w zadnym sklepie! [ http://oferty.onet.pl ] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Intel or Realtek?
I use Realtek, and have been using them for about a year now with absolutely no problems. The other I don't know, but I would say quite openly that the Realtek cards are great :-) Both are used here at home with 1 computer running Mandrake, and the other redhat... so there are no problems there. Good luck :-) Ralph On Tue, 4 Dec 2001, Eric Caron wrote: Hi everybody, I need to replace one of my network cards and I was wondering which model would be better between one that has the very popular Realtek 8139 or one that has the Intel 21143 (is that the one called 'Tulip'?). Both are by Intellinet and they are in the cheap and affordable category of product (because I'm on a tight budget right now). Any advice would be appreciated on which would work best under Mandrake and/or Red Hat. Thank you! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] How to execute .jar files on LM 8.1
On Tue, 4 Dec 2001 12:49:47 -0500 Anuerin G.Diaz [EMAIL PROTECTED] wrote: what version of java do you want to use? im using the one from sun and its working fine. classpath is defined in the .bashrc (single person) or in the /etc/profile (all users). my .bashrc entries look like this: export JAVA_HOME=/usr/java/jdk1.3.1/ export CLASSPATH=.:$JAVA_HOME/lib and ditch the kaffe if you dont need v1.1.x support (i use the blackbox port when i want that kind of support). HTH Well I had add a link to the java executable into my home directory but it worked! Thanks alot! I did ditch kaffe by the way. -- Tell a man there are 300 billion stars in the universe and he'll believe you. Tell him a bench has wet paint on it and he'll have to touch it to be sure. -Murphy's Law Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] FTP Problem - Please help if you can thanks :)
your cuteftp client at work is uisng passive mode, i assume thatis because work is behind a firwall that won' allow active ftp, toget passive mode to work with proftpd you need to allow the ftp client to either: i) connect to any random high port or ii) connect to a range of ports specified on your proftpd.conf file, either way the port that the client connects to must be opened on the target system, if you can't use active ftp from your client then i suggest opening a range of ports on the home system and listing them in /etc/proftpd.conf as follows snip #this allows passive ftp connections on a specified range PassivePorts minport maxport #this specifies the ip of the masquerading firewall MasqueradeAddress firewall-ip-address ---snip- i place this next to the global stuff at the top of proftpd.conf i have used a very small range of ports since my ftp box is low traffic and non-public, those ports are then opened and forwarded to the ftp box from the firewall, you must choose what you think appropriate bascule Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Still no printing in LM8.1!
I have the same no print problem with my HP 690C. The driver is installed, but the test page or any other document remains in the print que forever. I thought that it could have something to do with the pass-through connector for my scanner, but this causes no problems for WIN ME. I made certain that the scanner was turned on and all other conditions were the same as printing through Windows. Bill Bussell Marcia wrote: Dear All, I have been reading everything and doing everything I can think of to get my Epson Stylus Color to work with LM 8.1. I wrote for help about a week ago and nothing that has been suggested has worked. I even reinstalled LM 8.1 and the exact same thing happened again. The printing worked with the test pages then even worked at first with kword and abiword until I changed the default settings. I noticed that it works as long as I do not try to add xpp or change settings. Unfortunately the default settings are not acceptable so I have to adjust but once I do then the printing stops completely. I have checked files and I get messages such as device or resource is busy. Then when I check the queues they show all of my jobs are processing or pending but nothing prints. I am even tempted to get another printer even though I know it is not the printer. I even tried it again in Windows 98 to make sure and of course it works. I am tempted to put my Windows 95 as dual boot on this machine just to get some printing again. If anyone can help with this I will be very appreciative. Thank you. Sincerely, Marcia Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Changing the button style at Mandrake Control Center s user interface
how can I change the button decoration or style at Mandrake Control Center s user interface.Changing gnome or kde button styles (or decoration) doesnt effect it.Also gdm 's upper menu buttons are the same! Changing gnome s button decoration doesnt effect them. This is because I am very uncomfortable with the new uncheckable button decoration or style,I prefer checkmarkable ones ,So please give me a hand.Thanks!! device was not cleanly unmounted on shutdown - check forced You either haven't run 'shutdown' before turning the machine off or were forced to reboot the machine because of a system freeze. The GNU/Linux file system is very robust and usually you'll get away with a long file system check. If you are unlucky, however, vital system files may have been damaged. Keeping '/' on a small partition of its own minimizes this risk. Since ML 7.1, you have been able to choose the ReiserFS instead of extfs2 for your file system. RFS is a journaling file system and keeps track (a 'journal') of all read / write operations. So even in case of abrupt system failure, the status of the system will be preserved and no checks will be run at reboot. Notice that you can't 'transform' a partition from extfs2 to RFS without formatting it, i.e. loosing all data on the partition. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Changing the button style at Mandrake Control Center s user interface
how can I change the button decoration or style at Mandrake Control Center s user interface.Changing gnome or kde button styles (or decoration) doesnt effect it.Also gdm 's upper menu buttons are the same! Changing gnome s button decoration doesnt effect them. This is because I am very uncomfortable with the new uncheckable button decoration or style,I prefer checkmarkable ones ,So please give me a hand.Thanks!! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SPAM FILTER
Matt Koppelman wrote: I am a new sysadmin for my ISP.. we have a horrible spam problem here, greetings matt, congrats on your new position. everyone has a horrible time with spam. so do not feel alone. no one has done anything in the past to resolve it. because it is such a problem, is most likely why none prior to you have tried to relieve it. you have had several fine suggestions thru this list and may well get more. just which one you settle with is not going to be an easy decision to make. once you do, your biggest problem is still ahead of you. what are you going to decide is spam and what is desired my isp customers? you will need to set up some sort of 'spam abuse' address for customers to send complaints to. and you are going to find some of those complaints are ging to be that customers are no longer receiving their spam. what is spam to goose, is reading pleasure for gander. to me, casino ads are spam, to others it is a 1 in 1,000,000 chance for them to make money. to me, nude site ads are spam, to others it is a place to get their jollies. so, as a suggestion, before your keep anyone from become a millionare, or make someone who is over sexed become selibate, ask... also, because you have disabled your html, [i would advise getting out of targeted ole], if you would like, i would be glad to send you my list of spam filters. i imagine some others on this list might do same. but do remember, ask before you filter. else someone else may be faced with problem you are now facing. and remember, nothing worth having ever comes easy. good luck. tc,hago. g . =+= think green... save a tree, save a life, save time, save bandwidth, save storage. send text email.. text/plain - disable pgp/gpg/geek code =+= if you are proud to be an american, then buy made in america. =+= Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] StarOffice install problem
Thanks John, but yes, they were already executable. I played some more and made it work by moving the installation files to another directory. Not sure what difference this made yet, unless the fact that the directory I was trying to install in originally was in an exported tree caused the problem. Can anybody fill me in on this? Original place was in /home/public/so6beta/ /home/public is the root of an exported tree. Have now moved them to /usr/so6beta and things work. As this is to be a server based install I thought it made sense to put them in an area already NFS mounted. Or maybe this has nothing to do with the problem?? thanks again anyway /Brian On Wednesday 05 December 2001 12:11 am, you wrote: Have you tried checking the permissions on them to see if they are executable if not run chmod on them it should be chmod + x name_of_file if thats not correct man chmod will get you the right syntax. John Pisini http://www.cafecomputer.com Registered Linux User #100542 No. Try not. Do. Or do not. There is no try. -- Yoda From: Brian Parish [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: newbie [EMAIL PROTECTED] Subject: [newbie] StarOffice install problem Date: Tue, 4 Dec 2001 23:55:53 +1100 OK, so I've downloaded all the staroffice beta 6 files (15 bin files plus the pdf) on my slow modem connection. Put them on the server. Become root. Made them executable. Tried ./so-6000.bin -net and get permission denied. Please don't tell me they are corrupt!!! /Brian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Galeon and Java
It's not safe, and you NEVER should connect as root. For much the same reasons you should NEVER use Windoze to connect at all. In both situations, anybody has root capabilities This is not 100% correct. If you use Win9x/WinME, it is correct. All users have root privleges. If you use NT/Win2K/WinXP, you most certainly can easily connect to the Internet as a non-root-user, with no rights to install software. -- -- Michael J. Leone Registered Linux user #201348 mailto:[EMAIL PROTECTED]ICQ: 50453890 AIM: MikeLeone PGP Fingerprint: 0AA8 DC47 CB63 AE3F C739 6BF9 9AB4 1EF6 5AA5 BCDF PGP public key: http://www.mike-leone.com/~turgon/turgon-public-key.gpg Foreman, roving paving crew, Dept. of Roads, Hades. msg83355/pgp0.pgp Description: PGP signature
[newbie] How can I config the button style at Mandrake Control Center s user interface
how can I change the button decoration or style at Mandrake Control Center s user interface.Changing gnome or kde button styles (or decoration) doesnt effect it.Also gdm 's upper menu buttons are the same! Changing gnome s button decoration doesnt effect them. This is because I am very uncomfortable with the new uncheckable button decoration or style,I prefer checkmarkable ones ,So please give me a hand.Thanks!! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Still no printing in LM8.1!
On Tuesday 04 December 2001 12:39 pm, Marcia wrote: Dear All, I have been reading everything and doing everything I can think of to get my Epson Stylus Color to work with LM 8.1. I wrote for help about a week ago and nothing that has been suggested has worked. I even reinstalled LM 8.1 and the exact same thing happened again. The printing worked with the test pages then even worked at first with kword and abiword until I changed the default settings. I noticed that it works as long as I do not try to add xpp or change settings. Unfortunately the default settings are not acceptable so I have to adjust but once I do then the printing stops completely. I have checked files and I get messages such as device or resource is busy. Then when I check the queues they show all of my jobs are processing or pending but nothing prints. I am even tempted to get another printer even though I know it is not the printer. I even tried it again in Windows 98 to make sure and of course it works. I am tempted to put my Windows 95 as dual boot on this machine just to get some printing again. If anyone can help with this I will be very appreciative. Thank you. Sincerely, Marcia What printing system did you choose? Civileme Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] cChanging the button style at Mandrake Control Center s user interface
how can I change the button decoration or style at Mandrake Control Center s user interface.Changing gnome or kde button styles (or decoration) doesnt effect it.Also gdm 's upper menu buttons are the same! Changing gnome s button decoration doesnt effect them. This is because I am very uncomfortable with the new uncheckable button decoration or style,I prefer checkmarkable ones ,So please give me a hand.Thanks!! device was not cleanly unmounted on shutdown - check forced You either haven't run 'shutdown' before turning the machine off or were forced to reboot the machine because of a system freeze. The GNU/Linux file system is very robust and usually you'll get away with a long file system check. If you are unlucky, however, vital system files may have been damaged. Keeping '/' on a small partition of its own minimizes this risk. Since ML 7.1, you have been able to choose the ReiserFS instead of extfs2 for your file system. RFS is a journaling file system and keeps track (a 'journal') of all read / write operations. So even in case of abrupt system failure, the status of the system will be preserved and no checks will be run at reboot. Notice that you can't 'transform' a partition from extfs2 to RFS without formatting it, i.e. loosing all data on the partition. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] XFree upgrade question
On Tue, 4 Dec 2001, Michel Clasquin wrote: On Monday 03 December 2001 12:54, tek1 wrote: how can you easily tell what version you are running? *running* is problematic, but this command will tell you what is *installed* rpm -q XFree86 XFfree86 -version will do it. -- Chad Young Registered Linux User #195191 @ http://counter.li.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] can't eject cdrom
Should be: eject /dev/hdc On Monday 03 December 2001 20:05, you wrote: On Monday 03 December 2001 07:43 pm, ethan wrote: I tried that and got this : umount /mnt/cdrom umount: /mnt/cdrom: not mounted [root@Echelon ethan]# eject eject: unable to eject, last error: Invalid argument [root@Echelon ethan]# eject eject: unable to eject, last error: Invalid argument Just what the error mesg says, you didn't provide an 'argument' (not to be confused with what we do on the list ;) eject /dev/cdrom '/dev/cdrom/' is the missing argument Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Still no printing in LM8.1!
On Tuesday 04 December 2001 13:39, you wrote: Dear All, I have been reading everything and doing everything I can think of to get my Epson Stylus Color to work with LM 8.1. I know this isn't going to help much, because I wiped 8.1 and put 8.0 on (with 8.1 upgrades like the newest version of Abiword, Mozilla, etc). I did have printing issues with 8.1 -- Epson Stylus Color 740 --, but I uninstalled because of other problems. If it is any consolation, I did get my Epson to work. The bad news is, I can't remember how I did it, but I believe that it was through Kups, and it was after the printer failed to work correctly during the original install. My printer is through smb and is connected to a windows machine, and I used the printer command from my smb.conf file: lpr-cups -P %p %s Sorry that I can't remember where I plugged that in, though. I do remember that I typed it into a box somewhere in the printer configuration gui. e. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] can't eject cdrom
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Tue, 4 Dec 2001, ethan wrote: There IS a mandrake 'feature' that makes that! Whenever you change a file it changes it back on reboot! It perfect in general but, what if you *need* to change the config? I think it is connected to the 'security' level you've choosen. []s Ricardo Castanho you know what's strange: I tried to insert a normal CD into the tray and it mounts. So eject command is able to eject the cdrom after that, once I insert the audio cd inside, eject also can eject the cdrom now previously eject cannot eject the audio cdrom. Does anyone have an idea of what happened ??? thanks, /ethan - -- Whenever possible mailto:[EMAIL PROTECTED] == Linux user # 102240 = Machine # 96125 = Seti@home user == -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: Made with pgp4pine 1.75-6 iEYEARECAAYFAjwNiEsACgkQ9I0k95pf9XtmFQCePeC0BeYNsDnIgOpIrz20hbon ASMAnR11GQIdbXJgR1wQsW5LmtFkrQzx =qmNW -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] memory: leaks and fragmentations
I think so, check all the service u run. I just use 128Mb, never got like what u got. I monitor my memory used by gkrellm and open bluefish, opera, netscape, xmms, yahoo messenger, prozilla download manager, audio galaxy satellite, and still works fine, with not that much of using memory as u did. It's absolutely not windoze box! Well, yeah gnome is good, but kde has too many thing that much more interesting, like integration of all kde application. Kde is more fancy, but u could use window maker or black box which is lighter. -m- On Monday 03 December 2001 18:12, you wrote: this has been gone into for ever..but what you are veiwing _Might_ have to do with the cache use by linux. I don't think it is a memory leak (this ain't your win 95 box) On Monday 03 December 2001 04:08, you wrote: I think my KDE has a memory leak, although I've not been able to find any info on the possibility at kde.org. When I first turn on the computer, KDE is using about 80MB, just now it was using 250MB (ouch!). I got those two numbers from gtop. The memory usage builds up slowly over time. I just shutdown kde and looked at my memory with top, and despite all the kde processes being gone the memory usage didn't drop by much at all. At runlevel 3 with X/kde shutdown, and nothing but top being ran by me directly, I had about 70MB free of my 384MB of memory. That just doesn't sound right. I thought I left memory fragmenting behind with the Macintosh :) Now, coming back into kde, kde is using about 150MB. A big improvement over 250MB, but still more than it seems like it should be using. I am using kde 2.2.1. I had 2.2.2 briefly installed and noted it did the same thing. Searching the net doesn't turn up much. It seems people think Linux handles memory ok :) I think I will start using gnome or iceWM for a while and see if I notice the same thing happening. Matt _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Still no printing in LM8.1!
Dear Civileme, I originally chose cups with gimp print for Epson Stylus Color. Then I reinstalled and chose cups but with the lpr spooler and the same things happened again. I, also, changed drivers many times through webmin and the problems did not improve. Finally I got rid of cups and went to lpd and still nothing works. I am truly stumped. In most cases the printer would work for test pages and printouts in the beginning then as soon as I made any changes with the settings or added a printer then all jobs would get queued and never print. I hope to resolve this issue soon. I am certainly a newbie but had my printer working well with 7, 7.2, 8(eventually after a fix from Till) and now I hope to have it work well in 8.1. Thanks for your help. Sincerely, Marcia On Tuesday 04 December 2001 20:06, you wrote: On Tuesday 04 December 2001 12:39 pm, Marcia wrote: Dear All, I have been reading everything and doing everything I can think of to get my Epson Stylus Color to work with LM 8.1. I wrote for help about a week ago and nothing that has been suggested has worked. I even reinstalled LM 8.1 and the exact same thing happened again. The printing worked with the test pages then even worked at first with kword and abiword until I changed the default settings. I noticed that it works as long as I do not try to add xpp or change settings. Unfortunately the default settings are not acceptable so I have to adjust but once I do then the printing stops completely. I have checked files and I get messages such as device or resource is busy. Then when I check the queues they show all of my jobs are processing or pending but nothing prints. I am even tempted to get another printer even though I know it is not the printer. I even tried it again in Windows 98 to make sure and of course it works. I am tempted to put my Windows 95 as dual boot on this machine just to get some printing again. If anyone can help with this I will be very appreciative. Thank you. Sincerely, Marcia What printing system did you choose? Civileme Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Still no printing in LM8.1!
Dear Bill, Thank you for informing me of your problem. That answers my next question...should I get a new printer? I think not since I am noticing other printer brands are having similar problems here and there. I hope we can get these problems resolved. It is really nice to be able to print. Sincerely, Marcia On Tuesday 04 December 2001 17:56, you wrote: I have the same no print problem with my HP 690C. The driver is installed, but the test page or any other document remains in the print que forever. I thought that it could have something to do with the pass-through connector for my scanner, but this causes no problems for WIN ME. I made certain that the scanner was turned on and all other conditions were the same as printing through Windows. Bill Bussell Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Realtek 8139 and internet
On Tue, 4 Dec 2001 15:04:57 +0100 Marek M [EMAIL PROTECTED] wrote: Greeting from Poland Linuxmen ! I'm green. Can anyone tell me where to write my ip, mask, dns numbers to connect to internet ? Which file, or maybe your example. === It can be done in kppp (for dial-up connection) or you can edit /etc/resolv.conf domain your isp nameserver dns# nameserver dns# This editing must be done as the root user. HTH, Mike -- Modern art is what happens when painters stop looking at girls and persuade themselves that they have a better idea. -- John Ciardi _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Still no printing in LM8.1!
Thank you for your help. At least it is good to hear that someone did get an Epson to print eventually in 8.1. I have been thinking of going back to 8, but I think 8.1 is better for some other things. I even thought of doing a dual boot with Windows 95 , for a last resort way to get a working printer again. I just got rid of all of my cups and tried lpd but that is not working either. I am sure this will get resolved eventually. Thanks for your input. It may help me find an answer. Sincerely, Marcia On Tuesday 04 December 2001 21:45, you wrote: On Tuesday 04 December 2001 13:39, you wrote: Dear All, I have been reading everything and doing everything I can think of to get my Epson Stylus Color to work with LM 8.1. I know this isn't going to help much, because I wiped 8.1 and put 8.0 on (with 8.1 upgrades like the newest version of Abiword, Mozilla, etc). I did have printing issues with 8.1 -- Epson Stylus Color 740 --, but I uninstalled because of other problems. If it is any consolation, I did get my Epson to work. The bad news is, I can't remember how I did it, but I believe that it was through Kups, and it was after the printer failed to work correctly during the original install. My printer is through smb and is connected to a windows machine, and I used the printer command from my smb.conf file: lpr-cups -P %p %s Sorry that I can't remember where I plugged that in, though. I do remember that I typed it into a box somewhere in the printer configuration gui. e. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SPAM FILTER
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Tue, 4 Dec 2001, Matt Koppelman wrote: I don't know anything about procmail!] But I'm using it with spamfilter (from [EMAIL PROTECTED]). And it's perfect!! I just followed the instructions and that's it!! Must likely you DO have procmail installed on your system... you're just NOT using it! It's pitty I've lost the URL (for English I meam)! If you dutch. it's::http://nl.linux.org/ There was a English version, I can't find it now!! Rik, one of the creator/maintainers speaks Dutch, English and Portuguese! Drop him a line, if you are lucky, he'll answer you back! [EMAIL PROTECTED] This spamfilter 'creates' your filter, and will keep it update! And you can contribute with spammers email!! I'll try to find it! HTH Ricardo Castanho i dunno.. i dont have THAT much experience.. i've heard procmail is a nightmare to install, i'm looking for something quick, and easy.. - Original Message - From: Matt Greer [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, December 04, 2001 10:36 AM Subject: Re: [newbie] SPAM FILTER From: Matt Koppelman [EMAIL PROTECTED] I am a new sysadmin for my ISP.. we have a horrible spam problem here, and no one has done anything in the past to resolve it. I have decent linux experience, but i wouldnt exactly call myself a pro.. :) i have been looking into blackmail, but it seems very difficult to install. I was wondering if anyone out there knew of an AWESOME spam filter, that can be used system-wide (for ISP use) and is EASY to install and administer.. can anyone please help me?!?!? :) Give procmail a try. I'm about to set it up for my network as well. I don't actually have it running yet, but I've seen nothing but positive things about it. http://www.procmail.org/ Matt _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com - -- Whenever possible mailto:[EMAIL PROTECTED] == Linux user # 102240 = Machine # 96125 = Seti@home user == -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: Made with pgp4pine 1.75-6 iEYEARECAAYFAjwNkpYACgkQ9I0k95pf9XumRwCgk91c16SMSBlu3HmywaD3Wu1K mF4An2KXgh4rsvr+3f0RRbMgCbX6+bRW =0u+g -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Still no printing in LM8.1!
On Wed, 5 Dec 2001 02:27:54 -0500 Marcia [EMAIL PROTECTED] wrote: Thank you for your help. At least it is good to hear that someone did get an Epson to print eventually in 8.1. I have been thinking of going back to 8, but I think 8.1 is better for some other things. I even thought of doing a dual boot with Windows 95 , for a last resort way to get a working printer again. I just got rid of all of my cups and tried lpd but that is not working either. I am sure this will get resolved eventually. Thanks for your input. It may help me find an answer. My Epson 760 works without problem. Used it with 8.0, 8.1 and 8.2 (cooker). I use cups and set it up with the 800 driver using gimp print. Am also able to to use the Epson, as well as a NEC laser printer, from other systems using cups network. Charles Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Intel or Realtek?
I have installed cicero cards (on win 98 and LM8.0) that turned out to be realtek 8139's. Installation was flawless and the box even came with a 24hr 1-800 support number. It said something like Before you take this card back to the store please call. No opinion on Intel. Grant On December 4, 2001 12:32 pm, you wrote: I use Realtek, and have been using them for about a year now with absolutely no problems. The other I don't know, but I would say quite openly that the Realtek cards are great :-) Both are used here at home with 1 computer running Mandrake, and the other redhat... so there are no problems there. Good luck :-) Ralph On Tue, 4 Dec 2001, Eric Caron wrote: Hi everybody, I need to replace one of my network cards and I was wondering which model would be better between one that has the very popular Realtek 8139 or one that has the Intel 21143 (is that the one called 'Tulip'?). Both are by Intellinet and they are in the cheap and affordable category of product (because I'm on a tight budget right now). Any advice would be appreciated on which would work best under Mandrake and/or Red Hat. Thank you! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] FTP problem
Hi, I just begin to learn Linux, so my question may be very stupid. I just set up a Mandrake Linux 8.1 on my computer. I try to use FTP to connect to my linux server, it has no problem when the computer is in the same LAN. However, when I route outside the LAN and connect it from the Internet, the FTP server will not be able to list the files in the directory. I can still login with the user name and password, but it will stuck at LIST command. Can anyone tell me how to solve this problem? Thank you! Sincerely, Dan Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Still no printing in LM8.1!
I admit to seeing this thread in the middle, not from the beginning, and REALLY admit to being a newbie but have you checked out www.linuxprinting.org yet? Specifically: http://www.linuxprinting.org/show_printer.cgi?recnum=62112 http://www.linuxprinting.org/show_driver.cgi?driver=stp At 02:27 AM 12/5/2001 -0500, you wrote: Thank you for your help. At least it is good to hear that someone did get an Epson to print eventually in 8.1. I have been thinking of going back to 8, but I think 8.1 is better for some other things. I even thought of doing a dual boot with Windows 95 , for a last resort way to get a working printer again. I just got rid of all of my cups and tried lpd but that is not working either. I am sure this will get resolved eventually. Thanks for your input. It may help me find an answer. Sincerely, Marcia On Tuesday 04 December 2001 21:45, you wrote: On Tuesday 04 December 2001 13:39, you wrote: Dear All, I have been reading everything and doing everything I can think of to get my Epson Stylus Color to work with LM 8.1. I know this isn't going to help much, because I wiped 8.1 and put 8.0 on (with 8.1 upgrades like the newest version of Abiword, Mozilla, etc). I did have printing issues with 8.1 -- Epson Stylus Color 740 --, but I uninstalled because of other problems. If it is any consolation, I did get my Epson to work. The bad news is, I can't remember how I did it, but I believe that it was through Kups, and it was after the printer failed to work correctly during the original install. My printer is through smb and is connected to a windows machine, and I used the printer command from my smb.conf file: lpr-cups -P %p %s Sorry that I can't remember where I plugged that in, though. I do remember that I typed it into a box somewhere in the printer configuration gui. e. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com o o o o o o o o [EMAIL PROTECTED] o _ o _| | .][__n_n_|DD[ _ | | (|__|_[_]_|___| _/oo O oo` ooo ooo 'o!o!o o!o!o` -+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] FTP problem
This is a complete guess, but try swappin to passive ftp... its possible that your authentication is working fine on port21 but when it tries to switch to a high port, it is being blocked by a firewall (you do have one don't you?) easier to swap to passive... like I said, thats just a guess, I don't and rairly have ever used ftp. (I use scp or secure copy, which is much the same thing only it won't leave someone else with your password.) rgds Frank -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Daniel Chen Sent: Wednesday, 5 December 2001 12:32 PM To: [EMAIL PROTECTED] Subject: [newbie] FTP problem Hi, I just begin to learn Linux, so my question may be very stupid. I just set up a Mandrake Linux 8.1 on my computer. I try to use FTP to connect to my linux server, it has no problem when the computer is in the same LAN. However, when I route outside the LAN and connect it from the Internet, the FTP server will not be able to list the files in the directory. I can still login with the user name and password, but it will stuck at LIST command. Can anyone tell me how to solve this problem? Thank you! Sincerely, Dan Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] fetchmail config..
Gidday Frank Don't know anything about fetchmail but I have a silly question. Have you swapped the two around and put Yahoo first? rgds max Frank asked on Tuesday, December 04, 2001 10:38 PM I have a small fetchmail problem.. I have a .fetchmailrc file in /root that is supposed to check a few mail accounts and make delivery to a few local users.. so the file looks like this (with some detail changes obviously, to hide some confidential info :-) ## set postmaster postmaster set bouncemail set no spambounce set daemon 20 poll mail.vianet.net with proto POP3 user 'frankieh' there with password 'myPassWd' is 'franki' here options fetchall poll pop.mail.yahoo.com with proto POP3 user 'charmaine' there with password 'somechick' is 'charmaine' here options fetchall ## so, my question is this, why does the first email seem to be the only one collected??? the yahoo account doesn't seem to get collected.. anyone know why? Also, since I am running this as a deamon, should I add fetchmail to /etc/ppp/ip-up.local ?? so it starts when the dialup is completed? Any help, suggestions, slander, or anything else would be much appreciated. rgds Frank Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Upgrading kernel-2.4.13-12mdk.i586.rpm problem
I'm no guru. In a situation where I have something which depends on another and vice versa I put them all into an empty dir and use # rpm -Uvh * This seems to work well. rgds max Hello, gurus! I am using Mandrake 8.1 and I just downloaded the kernel-2.4.13-12mdk.i586.rpm and iptables-1.2.4-2mdk.i586.rpm available in the speakeasy.rpmfind.net site. I tried to install the new kernel and iptables using the commands of: # rpm -ivh kernel-2.4.13-12mdk.i586.rpm and # rpm -Uvh iptables-1.2.4-2mdk.i586.rpm and vice versa but I wasn't able to install those packages. It depends to one another. So I decided to open my kongueror browser and click the kernel first and automatically installed it using RPM Software Manager. And I was asked if I'll forcely install it and I clicked the YES button. And when it was successfully installed, I also clicked to install the iptables package. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Still no printing in LM8.1!
Gidday Marcia I have no experience with printing in Linux so this is a long shot. I had untold problems with printing just the odd file on the 14 iMacs at our school and it turned out to be 3 out the many installed fonts just locked up the printer whenever they were used. The error messages I got were in no way helpful and it was mere trial and error to beat it. The errant fonts were something like School...? Needless to say these fonts have been deleted. Maybe this helps rgds max Marcia asked on Wednesday, December 05, 2001 5:39 AM I have been reading everything and doing everything I can think of to get my Epson Stylus Color to work with LM 8.1. I wrote for help about a week ago and nothing that has been suggested has worked. I even reinstalled LM 8.1 and the exact same thing happened again. The printing worked with the test pages then even worked at first with kword and abiword until I changed the default settings. I noticed that it works as long as I do not try to add xpp or change settings. Unfortunately the default settings are not acceptable so I have to adjust but once I do then the printing stops completely. I have checked files and I get messages such as device or resource is busy. Then when I check the queues they show all of my jobs are processing or pending but nothing prints. I am even tempted to get another printer even though I know it is not the printer. I even tried it again in Windows 98 to make sure and of course it works. I am tempted to put my Windows 95 as dual boot on this machine just to get some printing again. If anyone can help with this I will be very appreciative. Thank you. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] FTP problem
as you probably already know, ftp uses two connections, data and control connection. the control connection is the one you make when you connect to the server. now, when you want to list the contents of a directory ( or download a file ), you will receive the directory listing or the file thru the data connection which is made by the server to your computer. probably you can´t get the DATA connection going, this may be because of a firewall/router blocking inbound connections. check your firewall/router. :o) bye. Hi, I just begin to learn Linux, so my question may be very stupid. I just set up a Mandrake Linux 8.1 on my computer. I try to use FTP to connect to my linux server, it has no problem when the computer is in the same LAN. However, when I route outside the LAN and connect it from the Internet, the FTP server will not be able to list the files in the directory. I can still login with the user name and password, but it will stuck at LIST command. Can anyone tell me how to solve this problem? Thank you! Sincerely, Dan Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Still no printing in LM8.1!
sorry my only experience is a networked usb printer, but have you tried surfing a few sites? a nice starting place, http://dmoz.org/Computers/Software/Operating_Systems/Linux/Support/ On Tuesday 04 December 2001 23:20, you spoke unto me thusly: Dear Bill, Thank you for informing me of your problem. That answers my next -- remember the original 'jimminey cricket'??? no? he got smashed for telling the truth, remember that the next time someone says honestly now, tell me what you think shane registered linux user #101606 @ http://counter.li.org/ http://www.mystic-light.net/personal/ Proud to be a DMOZ editor since 10-98 http://dmoz.org cause humans do it better! Link different. Profile at: http://dmoz.org/profiles/shen.html Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Still no printing in LM8.1!
On Tuesday 04 December 2001 10:17 pm, Marcia wrote: Dear Civileme, I originally chose cups with gimp print for Epson Stylus Color. Then I reinstalled and chose cups but with the lpr spooler and the same things happened again. I, also, changed drivers many times through webmin and the problems did not improve. Finally I got rid of cups and went to lpd and still nothing works. I am truly stumped. In most cases the printer would work for test pages and printouts in the beginning then as soon as I made any changes with the settings or added a printer then all jobs would get queued and never print. I hope to resolve this issue soon. I am certainly a newbie but had my printer working well with 7, 7.2, 8(eventually after a fix from Till) and now I hope to have it work well in 8.1. Thanks for your help. Sincerely, Marcia On Tuesday 04 December 2001 20:06, you wrote: On Tuesday 04 December 2001 12:39 pm, Marcia wrote: Dear All, I have been reading everything and doing everything I can think of to get my Epson Stylus Color to work with LM 8.1. I wrote for help about a week ago and nothing that has been suggested has worked. I even reinstalled LM 8.1 and the exact same thing happened again. The printing worked with the test pages then even worked at first with kword and abiword until I changed the default settings. I noticed that it works as long as I do not try to add xpp or change settings. Unfortunately the default settings are not acceptable so I have to adjust but once I do then the printing stops completely. I have checked files and I get messages such as device or resource is busy. Then when I check the queues they show all of my jobs are processing or pending but nothing prints. I am even tempted to get another printer even though I know it is not the printer. I even tried it again in Windows 98 to make sure and of course it works. I am tempted to put my Windows 95 as dual boot on this machine just to get some printing again. If anyone can help with this I will be very appreciative. Thank you. Sincerely, Marcia What printing system did you choose? Civileme Did you try LPRng or PDQ? just call printerdrake and choose expert mode and those are available to you. Leave lpd strictly alone. We excluded it because it has severe security issues as well as many limitations. If you have the printer directly connected to your computer, PDQ is probably the best choice. Civileme Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] sound server fatal error tmp/mcop-geert is not owned by user
Is there anybody who knows how to solve the problem message above? How do I reconfigure/reinstall this famous soundserver as a real newbie? Run update or so? Geert Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Armagetron and Tux Racer Games will not run
I recently installed Linux-Mandrake 8.1 on my system. For a Harry Homeowner or a Joe Sixpack like me, I was glad the installer recognized all my devices and installed properly without me having to fiddle with cryptic Unix commands or logging to the dreaded console (which I don't know how to use). I really like games, but I CAN'T RUN ARMAGETRON or TUX RACER. Whenever I launch these games, I can see the hourglass for the initial runtime processing of the game. The game then unexpectedly exits. I don't know why it behaves this way. Please help! Are there any documentation (html, readme.txt) or help files included with these games? Where can I get these if none is included? I run my KDE on X at a resolution of 1024x768. My graphics card is a SIS 530 running Xfree86 4.1 with 3D software acceleration (3D support deemed experimental by Xfree, according to the installer, but I installed it anyway, and it runs fine, except for the aforementioned games). The other games run fine, but they run in a window that I am unable to resize. Can I resize it? Am I right in suspecting that KDE's use of memory is responsible for this? What graphic interface would let me conserve the most memory for my games (Window Maker?, Blackbox?)? I plan to install heavyweight games such as Quake3, Unreal, Counter-Strike, Half-Life, and Red Alert 2: Yuri's revenge on my machine. Any tips you can advise? Here are my system specs. AMD-K6+2-500 128MB RAM SIS 530 on-board AGP 2x 8MB video RAM ES-SOLO on-board sound card 20GB hardrive Linux-Mandrake 8.1 Powerpack KDE and Gnome @ 1024x768 resolution Thanks, Michael Mike Peligro Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Netscape and Mozilla link problem
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 There's at least one web site (http://www.inewsreports.com/newsreport.asp?newsfeed=easterneuropenews_title=Eastern%20Europe%20News) where the links don't work when using Mozilla or Netscape (4.7x and 6.x). Is it a bug or a configuration problem? I have experimented with the Netscape Preferences but can't seem to get the links to work. The links work fine with IE. -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE8DWWMjCg8oFTHzFARAsSMAKD4ODttSTYISzs6KFEkaU7UqrqKMgCfbM1b FwNrDPHZLxMAODQsj0ltCBc= =xW2F -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] An interesting definition I came across
Something I found in dictionary of computing while looking up something else. http://foldoc.doc.ic.ac.uk/foldoc/foldoc.cgi?evil+and+rude Robin Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SPAM FILTER
Matt, have you looked into setting up some regex's in the SMTP's configuration file. This is one good way to start taking a bite out of all that crap they're sending at your mailservers. That is definatelythe first place i would start to look as opposed to finding a third party app to take care of this. Another good alternative would be Procmail. That would/is my second step in a tiered filtering scheme. -- daRcmaTTeR =/\=??? |%C++ Registered Linux User # 186492 Beware of little sins. Mosquitoes drink more blood than lions. Author unknown On Tue, 4 Dec 2001, Matt Koppelman wrote: I am a new sysadmin for my ISP.. we have a horrible spam problem here, and no one has done anything in the past to resolve it. I have decent linux experience, but i wouldnt exactly call myself a pro.. :) i have been looking into blackmail, but it seems very difficult to install. I was wondering if anyone out there knew of an AWESOME spam filter, that can be used system-wide (for ISP use) and is EASY to install and administer.. can anyone please help me?!?!? :) THANKS! - Matt Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SPAM FILTER
Matt, Procmailis fairly simple and straightforware and just requires a bit of time to get to know it and the syntax it uses to filter mail. it's very nice once you get to know it. -- daRcmaTTeR =/\=??? |%C++ Registered Linux User # 186492 Beware of little sins. Mosquitoes drink more blood than lions. Author unknown On Tue, 4 Dec 2001, Matt Koppelman wrote: i dunno.. i dont have THAT much experience.. i've heard procmail is a nightmare to install, i'm looking for something quick, and easy.. - Original Message - From: Matt Greer [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, December 04, 2001 10:36 AM Subject: Re: [newbie] SPAM FILTER From: Matt Koppelman [EMAIL PROTECTED] I am a new sysadmin for my ISP.. we have a horrible spam problem here, and no one has done anything in the past to resolve it. I have decent linux experience, but i wouldnt exactly call myself a pro.. :) i have been looking into blackmail, but it seems very difficult to install. I was wondering if anyone out there knew of an AWESOME spam filter, that can be used system-wide (for ISP use) and is EASY to install and administer.. can anyone please help me?!?!? :) Give procmail a try. I'm about to set it up for my network as well. I don't actually have it running yet, but I've seen nothing but positive things about it. http://www.procmail.org/ Matt _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com