Re: [newbie-it] lan da konquero
Germano wrote: Non ho capito alla fine quale sia la tua conclusione, gli :-) sono un pò fuorvianti. [andrea@panoramix]$ df -h FilesystemSize Used Avail Capacity Mounted on /dev/hda3 1.5G 1.3G35M 98% / /dev/hda1 850M 375M 475M 44% /dosc rios1:/userhome34G 28G 6.4G 81% /home che se riesco a usare 34GB da una macchina senza disco o da una con una partizione linux da 1.3GB significa che lo spazio nfs non viene addebitato alla mia macchina. kfsstatus (solo perchè è carino) vedrai che prima di montare la partizione hai una certa quantità di disco disponibile e dopo un pò meno. Non ho a disposizione kfsstatus e in istituto non posso diventare root. Pero`, mi sembra strano che ci siano variazioni significative. Quasi certamente, dovrai creare dei file di servizio, ma non credo siano enormi. Di quanto ti varia lo spazio libero? Riesci (es du -ms /*) a capire da dove viene tolto? ciao, andrea
Re: [newbie-it] X-Cd- Roast
I programmi di masterizzazione vedono i CDROM solo se SCSI o emulati SCSI Stranamente GCombust mi trova tutti e due gli IDE, lettore e masterizzatore, mentre X-Cd- Roast no Tommaso
Re: [newbie-it] X-Cd- Roast
Lele wrote: Ci ho provato modificando il file lilo.conf, aggiungendo append= hdd=ide-scsi per il masterizzatore che è slave sul 2° controller, ma se tento di aggiungere anche hdb=ide-scsi che è il cdrom, slave sul 1° non succede nulla, in qualsiasi modo lo scriva. Non è che la catena scsi deve essere continua cioè a,b,c,d, ? Ho poca esperienza: ho il masterizzatore solo da pochi giorni :-) La traccia che ho seguito io e`: 1) in lilo ho messo append= ... ide-scsi senza specificare hdX 2) in /rc/modules.con ho messo options ide-cd ignore=hdb alias scd0 sr_mode pre-install sg modprobe ide-scsi pre-install sr_mod modprobe ide-scsi pre-install ide-scsi modprobe ide-cd la riga ignore=hdb dovrebbe informare il kernel che deve vedere il device solo come scsi. preso pari pari da un messaggio su un'altra ML 3) ho modificato /etc/fstab in modo che il cdrom non sia piu` montato come /dev/hdb tutto sembra funzionare correttamente. ciao, Andrea
[newbie-it] Gdk-WARNING **: locale not supported by C library
Questo è quanto mi succede se installo Netscape 6: [root@lampo netscape-installer]# /netscape-installer Gdk-WARNING **: locale not supported by C library Gtk-CRITICAL **: file gtkwidgetc: line 1510 (gtk_widget_hide): assertion `widget != NULL' failed [root@lampo netscape-installer]# /usr/local/netscape/run-mozillash /usr/local/netscape/mozilla-bin -installer shell-init: could not get current directory: getcwd: cannot access parent directories: No such file or directory MOZILLA_FIVE_HOME=/usr/local/netscape LD_LIBRARY_PATH=/usr/local/netscape/Cool:/usr/local/netscape:: LIBPATH=/usr/local/netscape:/usr/local/netscape/Cool SHLIB_PATH=/usr/local/netscape:/usr/local/netscape/Cool XPCS_HOME=/usr/local/netscape/Cool MOZ_PROGRAM=/usr/local/netscape/mozilla-bin MOZ_TOOLKIT= moz_debug=0 moz_debugger= *** QfaServices is being registered Gdk-WARNING **: locale not supported by C library I am inside the initialize Hey : You are in QFA Startup (QFA)Talkback loaded Ok Dove ho sbagiato? durante l'installazione ho inserito tutto tranne il settore Server Ciao Elio
[newbie-it] installazione mandrake 8.1
Perchè se cerco di reinstallare Mandrake 81 senza formattare i dischi l'installazione si pianta al momento di configurare la connessione ad internet ADSL + ethernet e non c'è modo di saltarla L'errore è che non trova /mnt/etc/resolvconfig Ciao Elio
Re: [newbie-it] Il computer si blocca!!!
Nicola wrote: Salve a tutta la ML, nei giorni scorsi sono incappato in un grosso problema, e spero che qualcuno mi dia alcune idee per risolverlo se si dovesse ripresentare In modo randomico, e senza un apparente motivo il computer si blocca e l'unico modo che ho per riprendere la normale attività e il reboot tramite il tasto reset! Prima che qualcuno mi offenda, specifico che ci sono costretto, visto che il mouse non si muove, la tastiera non risponde, e non riesco neppure ad attivare i terminali virtuali (si chiamano cosi?) ctrl+alt+F1 Non viene generato nessun file Core, il problema si verifica quanto sotto KDE che sotto GNOME, sia che usi XMMS per ascoltare un mp3 che quando uso Evolution per leggere la posta o se faccio una partita a Tux racer E indistintamente che utilizzi root, o un altro utente L'ultima volta mi si è piantato mentre modificavo i menù di gnome Premetto che ultimamente ho installato una GeForce 2 Mx e i relativi drivers ver 1023 in formato RPM, ma che questo non è coinciso con il verificarsi del blocco, ma è trascorso più di un mese (sinceramente non credo che dipenda dai driver, ma non si sa mai) Io non so cosa fare, visto che ad ogni riavvio (non proprio pulito) mi sorbisco tutta una serie di errori che (dice) FIXED, stamani ho optato per unanuova installazione, sperando che il problema non si ripresenti, ma nel caso se qualcuno ha qualche suggerimento, qualche idea, o consiglio, gliene sarei molto grato Grazie Nicola Ciao Secondo me e' un problema hardware: potresti dare qualche specifica in merito? Ciao
Re: [newbie-it] XMMS
From: tom [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: [newbie-it] XMMS Date: Thu, 28 Feb 2002 19:10:06 +0100 Nessuno di voi ha mai avuto problemi con XMMS? io ne ho due in particolare che mi stando dando qualche fastidio IL primo e piu fastidioso è..ogni tanto qundo riproduce continuatamente gli mp3 nel passare ad una canzone all altra mi si pianta mandandomi come messagio... couldn't open audio please check that 1 you have the corect output plugin.. 2 no other programs.. 3 your soundcard. all inizio credevo che fossere gli mp3 corrotti ma poi l'unico modo per farlo ri funzionare è andare in preferences ... pure a me XMMS si è bloccato ho optato per una alternativa: MUSICMATCH Jukebox, uguale alla versione per Window. PROVALO!!! P.S. Scarica e segui passo passo le istruzioni per l'installazione e vedrai qualcosa di bello. Fabio. _ Prova MSN Messenger per conversare in linea con i tuoi amici: http://messenger.msn.it
Re: [newbie-it] problemi con la stampa dal mio server mandrake
Natalo wrote: >Ciao Alessandro > >Anche io come te ho configurato uno dei miei Pc di casa come server (Rete con >condivisione,Dns,telnet,ftp,ssh,smb,nfs,cups con due stampanti di cui una sotto >printserver di rete)) e chi piu' ne ha piu' ne metta!!! >Sono stato esagerato lo so, ma dovendo fare esperienza le sto' provando tutte >per farmi la pelle e ti diro', avendo sulla partizione 2 Win2000 pure lui usato >come server, le differenze si notano eccome!!! >Mi scuso ma ho terminato ora ora i settaggi finali della Mandrake e la >soddisfazione mi porta a divagare > E' la prima volta che Mandrake si comporta cos... > >Tornando a noi , nel mio settaggio del Server Samba ti riporto pari pari la mia >configurazione sperando cosi' che tu possa, attraverso un confronto >diretto,trovare la soluzione al tuo problema!! e divagare anche te..: -) !!! >Un piccolo consiglio... >Durante il mio settaggio, la maggior parte della voci non le ho dovute >cambiare,tranne quelle sottolineate che ritengo le fondamentali!! >Spero di non averne dimenticata qualcuna, comunque per sicurezza ti consiglio >di stamparti Smb howto in italiano che hai sulla Mandrake! >Se puoi resetta tutti i settaggi di Samba e riparti dall'inizio...solo cosi' >sarai sicuro di modificare solo poche voci ma sicure!! > [Cut] > > security = USER > [CUT] Io qui ho messo SHARE per risolvere i problemi inerenti alle password, ma pare che i collegamenti dai client winbased li preferisca se settato su user... o sbaglio? [Ri-CUT] > > printing = cups > print command = /usr/bin/lp -d%p -oraw %s; rm %s > lpq command = /usr/bin/lpstat -o%p > lprm command = /usr/bin/cancel %p-%j > lppause command = > lpresume command = > queuepause command = /usr/bin/disable %p > queueresume command = /usr/bin/enable %p > > [Ri-CUT] Qui ho due domande da farti: 1) In samba devo specificare il percorso usr/bin dei comandi di stampa o basta "lp... ecc. ecc..."? No assolutamente!!! nella mia mandrake dalla console di Samba io ho solo creato una nuova stampante chiamata lp, nella quale ho lasciato intatti tutti i settaggi tranne quelli che hai visto!! 2) Qui hai messo CUPS e sotto alla stampante bsd... non capisco. Giusta osservazione..ma la mia risposta non e' sicura ma solo una deduzione poiche sinceramente a questo caso non avevo posto attenzione!! Quando tu installi il SO alla fine della configurazione ti chiede se vuoi installare una stampante, la quale di solito sulla macchina a cui e' collegata fisicamente viene gestita tramite CUPS!!! Infatti il settaggio CUPS non e' nella voce della stampante ma nelle impostazioni globali del sistema!!! Con bsd penso che faccia una ridirezione della richiesta di stampa da parte di un utente non linux che non puo' interagire direttamente con i CUPS!! Infatti se ci fai caso avviando i client linux invece non devi settare niente perche' usado tutti e due questi demoni le stampanti vengono condivise automaticamente senza settaggi Magari ho detto una cosa atrocemente blasfema ma come tutti i patacchini alle prime armi come si dice: ".nessuno nasce imparato!!! " >[lp] > path = /tmp > printable = Yes > printing = bsd > >Nella configurazione di smb ho dovuto dare alla stampante il nome della coda >altrimenti non mi stampava niente!!! > Misteri... Prova...tanto non ti costa niente penso So solo una cosa. Devo aver sbagliato qualcosa nel reinstallare il sistema. Se continua cos mi sa che faccio prima a reinstallare il tutto invece di stare qui ad ammazzarmi dietro ai file di configurazione.. Ti capisco...anche io ho fatto cosi' un paio di volte e sai cosa mi e' capitato di fare??? Ho dovuto creare io la cartella Samba in /etc/ perche' il sistema non me la creava in automatico...guarda se c'e'!!! Dentro ci sposti solo il smb.conf e smbpasswd!! Prima di tutto io ho creato gli utenti poi le cartelle e la stampante!!! ma queste penso che non siano fondamentali come cronologia pero' non avendomi dato problemi perche' lasciare la strada buona In ogni modo se formatti quando ci sei di nuovo stampati gli howtovedrai che ti daranno un grande aiuto!!! Grazie mille ;) (meno male che fra due giorni parto per la settimana bianca). Beato Te... divertiti Un saluto. Ciao Nat
Re: [newbie-it] installare stampante
From: io [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: [newbie-it] installare stampante Date: Wed, 27 Feb 2002 22:34:57 +0100 ho una hp deskjet 600, con redhat funzionava, con Mandrake 8.1 non riesco a stampare. ho seguito tutte le istruzioni, ho usato cups. Nulla. Cosa mi sfugge. grazie. giam Sempre dal Mandrake Control Center - Hardware - Printer - clicca su configura e poi su aggiungi stampante e ok (o fatto, adesso non ricordo), quindi installa la tua stampante... ciao, Fabio _ Prova MSN Messenger per conversare in linea con i tuoi amici: http://messenger.msn.it
Re: [newbie-it] Il computer si blocca!!!
Direi che per una buona percentuale dipende dall'hardware Io controllerei le seguenti cose: Il sistema di ventilazione della cpu Il sistema di ventilazione del chip grafico sulla GeoForce Le RAM Anche io ho una GeoForce e sul processore ho montato una bella ventola supplementare (in passato ho avuto problemi - su un'altra macchina - addirittura con una 3dfx) Ciao Sandro Ti ringrazio per il consiglio, ma lo avevo già adottato, il mio computer attualmente sono montate tre ventole fantozziane sopplementari, e la temperatura della CPU raramente supera i 43 °C, per quanto riguarda la scheda grafica non ho modo di misurarne la temperatura, ma vista l'areazione che ha difficilmente il problema è questo anche perchè il problema si è presentato anche appena il computer è partito, ma non è detto che dopo un giorna di attività stressante si presenti Per quanto riguarda eventuali danni all'hd durante l'ultima installazione ho fatto eseguire un controllo dei blocchi danneggiati, ma non ho ottenuto informazioni in merito (spero che eventuali errori mi sarebbero stati comunicati) Parlandone all'università con dei miei amici, è venuto fuori che secondo loro era probabile un blocco del solo sistema grafico X, e che questo avrebbe tranquillamente interessato sia la tastiera che il mouse Ma neanche loro hanno saputo dirmi dove andare a controllare se questa ipotesi fosse vera Hanno accennato a un eventuale file core, o altro, generato forse in una directory ma non hanno saputo dirmi altro Secondo voi questa ipotesi è plausibile? Dove trovare questi fantomatici file core? Cosa farci? Grazie
[newbie-it] Mouse senza più rotellina.
Ciao, ho un piccolo problema con il mouse: ho un logitech cordless, preso assieme alla tastiera, anch'essa Logitech ed ergonomica. Ad un certo punto non ha più funzionato, e, quasi preso dalla disperazione, l'ho aperto e poi richiuso, ed ha ripreso a funzionare, ma non la rotellina, che sotto windows funziona invece bene. Posso fare qualcosa ? Grazie, ciao. Alberto [EMAIL PROTECTED]
Re: [newbie-it] Il computer si blocca!!!
Alle 21:19, venerdì 1 marzo 2002, hai scritto: Direi che per una buona percentuale dipende dall'hardware Io controllerei le seguenti cose: Il sistema di ventilazione della cpu Il sistema di ventilazione del chip grafico sulla GeoForce Le RAM Anche io ho una GeoForce e sul processore ho montato una bella ventola supplementare (in passato ho avuto problemi - su un'altra macchina - addirittura con una 3dfx) Ciao Sandro Ti ringrazio per il consiglio, ma lo avevo già adottato, il mio computer attualmente sono montate tre ventole fantozziane sopplementari, Prendo atto :-)) [cut] Parlandone all'università con dei miei amici, è venuto fuori che secondo loro era probabile un blocco del solo sistema grafico X, e che questo avrebbe tranquillamente interessato sia la tastiera che il mouse Si è plausibile Infatti in XF86Config-4 ci sono anche le configurazioni per tastiera e mouse (sezioni Input section e pointer section) e quindi un blocco di X potrebe bloccare anche loro neanche loro hanno saputo dirmi dove andare a controllare se questa ipotesi fosse vera Hanno accennato a un eventuale file core, o altro, generato forse in una directory ma non hanno saputo dirmi altro Secondo voi questa ipotesi è plausibile? Dove trovare questi fantomatici file core? Cosa farci? Io avevo problemi sul portatile, quando montavo la rh71 e i file core li creava all'interno della directory dell'utente root e nella home dell'utente loggato al momento, ma non penso che faccia testo Prova a fare una ricerca di file mettendo come argomento core, se ci sono saltano fuori Se li editi (sono file in formato testo) ti possono dare informazioni su quale programma o modulo ha determinato il blocco Se utilizzi kde, molto spemplicemente vai nel menù K - applicazioni - strumenti per file - trova file Ciao Sandro -- Dr Sandro Porrazzini Mandrake Linux 81 on Pentium III 688 Mhz Linux Machine # 103048 Linux User # 203143
Re: [newbie-it] Mouse senza più rotellina.
Alle 15:48, venerdì 1 marzo 2002, hai scritto: Ciao, ho un piccolo problema con il mouse: ho un logitech cordless, preso assieme alla tastiera, anch'essa Logitech ed ergonomica. Ad un certo punto non ha più funzionato, e, quasi preso dalla disperazione, l'ho aperto e poi richiuso, ed ha ripreso a funzionare, ma non la rotellina, che sotto windows funziona invece bene. Posso fare qualcosa ? Grazie, ciao. Alberto Lancia il Mandrake Control Center Vai nella sezione Hardware - Mouse Qui scegli Generic PS2 Wheel Mouse. Se è già impostata questa opzione il problema è di altra natura. Ciao Sandro -- Dr. Sandro Porrazzini Mandrake Linux 8.1 on Pentium III 688 Mhz Linux Machine # 103048 Linux User # 203143
[newbie-it] ?!? TRattasi di SOPRAVVIVENZA!!! - Nikon 775
Ciao a tutti! Eccovi i problemi della settimana... Visto che in fase di avvio Linux mi dava due errori nel montaggio del dispositivo USB (non trovava nulla nel percorso /proc/bus/usb, e infatti non c'era nulla, ma vorrei tanto sapere chi ha ripulito il contenuto di quella cartella!) ho reistallato tutto. Adesso mi trovo con i seguenti problemi: 1) per montare la macchina fotografica ho bisogno dei seguenti moduli (che prima avevo ed adesso non ho piu', ohibo'! :-( ) usbcore.o uhci.o usb-storage.o scsi_mod.o sd_mod.o fat.o vfat.o Dove li trovo? In lib/modules non ci sono, se li devo installare, in che pacchetto sono? Il pacchetto e' un rpm, vero? 2) per montere la macchina fotografica ho bisogno di un device SCSI tipo sda1, ma nella directory \dev non c'e'. Come lo creo? Oppure se lo creano i moduli di cui sopra una volta installati? (visto ceh prima, quando avevo i moduli, c'era anche il device) 3) quando installo alcuni programmi, mettiamo da un semplice rpm, essi si creano una cartella e dei file eseguibili. Ora, per lanciare il programma, lancio l'eseguibile... ma non succede nulla. Questo e' un po' lo stesso discorso che vi avevo chiesto la settimana scorsa, e che avevo risolto solo in parte digitando ./nome del programma, pero' cosi' mi parte la versione da terminale del programma in questione, e non quella grafica... 4) ho un disco fisso con partizione nascosta, come la rendo visibile? -- A presto, Arwan mailto:[EMAIL PROTECTED]
Re: [newbie] Sound card install problem
You are actually looking in the wrong place. KDE Control CenterSystemKDE System Controlaudio,video and game controllers is where your card should be listed. Where you looked always shows no information (at least on my systems). If your card is not listed in the KDE System Control, you have another problem. e. On 01 Mar 2002 15:05:50 +1100 Brian Parish [EMAIL PROTECTED] wrote: Jeff, Welcome! I don't have any info specific to your card, but a good starting point would be to go to the ALSA site and look at the sound card matrix. http://www.alsa-project.org/~goemon/ There are two Philips cards mentioned there, but I'm have no idea if they relate to yours. HTH Brian On Fri, 2002-03-01 at 13:52, Jeff Quandt wrote: I have recently installed Mandrake 8.1 and I am attempting to get settled in. I noticed that my sound card was not installed. Obviously, my first clue was there was no sound. When looking at, in KDE, Control Center - Information - Sound, I get a msg stating Sorry no info available on your Sound Card. As I said, I am quite new to Linux, but I am an experienced Windows user. So, I attemped to find a Control Panel or device manager type service, but I am at a loss. Any help would be nice, even a link to a nice Linux hardware install tutorial type thing would be good. Thanks, Jeff Tech Specs: AMD 1.33 Ghz Asus AVA266 MoBo 1009 BIOS Philips Acoustic Edge Sound Card Geforce 2 MX 400 32 MB Graphics 512 DDR RAM Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Sound card install problem
Hi, Jeff The KDE Control Center - Information - Sound may not always be correct. I have working SB 16 and SB live installed, they show up as no info available too. Try to get out of X and login as root in a text console, run sndconfig and see what happens. HTH Robin -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Jeff Quandt Sent: Thursday, February 28, 2002 6:53 PM To: [EMAIL PROTECTED] Subject: [newbie] Sound card install problem I have recently installed Mandrake 8.1 and I am attempting to get settled in. I noticed that my sound card was not installed. Obviously, my first clue was there was no sound. When looking at, in KDE, Control Center - Information - Sound, I get a msg stating Sorry no info available on your Sound Card. As I said, I am quite new to Linux, but I am an experienced Windows user. So, I attemped to find a Control Panel or device manager type service, but I am at a loss. Any help would be nice, even a link to a nice Linux hardware install tutorial type thing would be good. Thanks, Jeff Tech Specs: AMD 1.33 Ghz Asus AVA266 MoBo 1009 BIOS Philips Acoustic Edge Sound Card Geforce 2 MX 400 32 MB Graphics 512 DDR RAM _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] how to setup TV-card in Mandrake8.1?
mandrake linux wrote: HI: how to setup TV-card in Mandrake81? anyone can help? Ming Wu Depends on which tv card you have if it is an ati then google for gatos i think gatos has moved to sourceforge but am not sure about this +mario -- The software said 'runs on Win95 or better,' so I installed it on Linux Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
RE: [newbie] missing swap partition?
It certainly looks like you are on the right track. Do you have an entry for a swap partition in your /etc/fstab? It should look something like this /dev/hda6 swap swap defaults 0 0 You can use diskdrake to create a swap partition without having to reinstall BTW: Unless you like getting disc corruptions avoid switching off the machine. Use Ctl+Alt+F2 to get a console then as root shutdown -h now If you get really stuck use SysReq keys to shut down. See page 146 of the Reference Manual for details. file:/usr/share/doc/mandrake/en/ref.html/ts-system-freeze.html derek Derek, Thanks for your help, I've now created a swap partition and my machine is much happier - I deliberately opened as many apps as I could think of and watched... and watched... and my PC no longer crashes! Thanks again, Richard *** This e-mail and its attachments are intended for the above named recipient(s) only and are confidential and may be privileged. If they have come to you in error you must take no action based on them, nor must you copy or disclose them or any part of their contents to any person or organisation; please notify the sender immediately and delete this e-mail and its attachments from your computer system. Please note that Internet communications are not necessarily secure and may be changed, intercepted or corrupted. We advise that you understand and observe this lack of security when e-mailing us and we will not accept any liability for any such changes, interceptions or corruptions. Although we have taken steps to ensure that this e-mail and its attachments are free from any virus, we advise that in keeping with good computing practice the recipient should ensure they are actually virus free. Copyright in this e-mail and attachments created by us belongs to Littlewoods. Littlewoods takes steps to prohibit the transmission of offensive, obscene or discriminatory material. If this message contains inappropriate material please forward the e-mail intact to [EMAIL PROTECTED] and it will be investigated. Statements and opinions contained in this e-mail may not necessarily represent those of Littlewoods. Please note that e-mail communication may be monitored. Registered office: Littlewoods Retail Limited, Sir John Moores Building, 100 Old Hall Street, Liverpool, L70 1AB Registered no: 421258 http://www.littlewoods.com *** Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Acer 342T soundcard problem.
On Fri, 01 Mar 2002 01:06:36 + Wei Wang [EMAIL PROTECTED] wrote: Thanks guys, ;-) Still got problems here. When I set mount quiet, execute lilo and reboot, no mixer in /dev and cdroms is in /dev. When I set append=devfs=nomount quiet in /etc/lilo.conf, after lilo and reboot, the mixer does appear in /dev, but this time cdroms disappeared. In this case, KMenu-Multimedia-sound-audio mixer still prompts no permission to /dev/mixer and check if module compiled into kernel. I am sure I have permission to /dev/mixer. And the module IS compiled into kernel coz lsmod gives out: Module Size Used by snd-es193812176 0 (autoclean) (unused) snd-pcm 0 (autoclean) [snd-es1938] snd-timer 0 (autoclean) [snd-pcm] snd-mixer 0 (autoclean) [snd-timer] snd 0 (autoclean) [snd-es1938 snd-pcm snd-timer snd-mixer] soundcore 0 (autoclean) [snd] So when mixer exists in /dev, I have full permission to it, the module is in the kernel. The only thing I don't understand is why it's NOT used by anyone) /etc/modules.conf reads: pre-install pcmcia_core CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start alias usb-interface usb-ohci alias eth0 eepro100 alias sound-slot-0 snd-es1938 Anything wrong here? snip Yes. See the /usr/src/linux-2.4.8/alsa-driver-0.5.11/INSTALL file, it's in the kernel-source .rpm package. Note the name of the module (snd-card-es1938) and the remarks about devfs. HTH, -Frans Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Sound trouble with Dell Optiplex GX1
On 28 Feb 2002 19:57:43 -0800 James A. Peltier [EMAIL PROTECTED] wrote: info supplied if anything more is required please let me know. BTW: sndconfig doesn't work at all. Is the sndconfig package installed and did you run as root? What do you mean with 'sndconfig doesn't work at all'? [root@agent-orange root]# harddrake Can't open file `/dev/fd1' for reading! Can't open file `/proc/parport/0/autoprobe' for reading! this is fine i don't have a second floppy drive or anything new attached to my parellel port. [root@agent-orange root]# uname -a Linux agent-orange.int.site-fx.net 2.4.8-34.1mdk #1 Mon Nov 19 12:40:39 MST 2001 i686 unknown Under harddrake - soundcards Vendor: Crystal Model: PnP Audio System CODEC Kernel Module: cs4232 Bus Type: ISA MPU401: yes DMA2/16: yes Vendor: Crystal Model: PnP Audio System MPU-401 Kernel Module: unknown Bus Type: ISA Then you must run the configuration tool. snip -Frans Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Block Ip
On Fri, 01 Mar 2002, Jesse Angell wrote: %_It says REJECT and DROP are both bad arguements REJECT tells the user you won't accept his connection DROP , just drops it an tells him nothing, it's like the connection never exiisted -- Gerald Waugh Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
sndconfig: soundcard not supported Re: [newbie] Acer 342T soundcard problem.
Thanks. I just ran sndconfig 0.65.0 and was told my sound card ESS IES1969 Solo-1 is not currently supported. I think this means the end of the day. ;-( From: Frans Ketelaars [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [newbie] Acer 342T soundcard problem. Date: Fri, 1 Mar 2002 12:23:19 +0100 On Fri, 01 Mar 2002 01:06:36 + Wei Wang [EMAIL PROTECTED] wrote: Thanks guys, ;-) Still got problems here. When I set mount quiet, execute lilo and reboot, no mixer in /dev and cdroms is in /dev. When I set append=devfs=nomount quiet in /etc/lilo.conf, after lilo and reboot, the mixer does appear in /dev, but this time cdroms disappeared. In this case, KMenu-Multimedia-sound-audio mixer still prompts no permission to /dev/mixer and check if module compiled into kernel. I am sure I have permission to /dev/mixer. And the module IS compiled into kernel coz lsmod gives out: Module Size Used by snd-es193812176 0 (autoclean) (unused) snd-pcm 0 (autoclean) [snd-es1938] snd-timer 0 (autoclean) [snd-pcm] snd-mixer 0 (autoclean) [snd-timer] snd 0 (autoclean) [snd-es1938 snd-pcm snd-timer snd-mixer] soundcore 0 (autoclean) [snd] So when mixer exists in /dev, I have full permission to it, the module is in the kernel. The only thing I don't understand is why it's NOT used by anyone) /etc/modules.conf reads: pre-install pcmcia_core CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start alias usb-interface usb-ohci alias eth0 eepro100 alias sound-slot-0 snd-es1938 Anything wrong here? snip Yes. See the /usr/src/linux-2.4.8/alsa-driver-0.5.11/INSTALL file, it's in the kernel-source .rpm package. Note the name of the module (snd-card-es1938) and the remarks about devfs. HTH, -Frans Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com _ Send and receive Hotmail on your mobile device: http://mobile.msn.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] domain registration
Hi guys a question which has not much to do with mandrakeIf I want to create a website ...let's say...www.i_love_curry.com or any other name..and host it on my PChave I got to pay some of those registrar companies to register the domain name or can I just set it up ?? Thanks everyonethis list is great.. Maurizio __ Abbonati a Tiscali! Con Tiscali By Phone puoi anche ascoltare ed inviare email al telefono. Chiama Tiscali By Phone all' 892 800http://byphone.tiscali.it Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
RE: [newbie] domain registration
Title: RE: [newbie] domain registration You will have to register a domain name. In doing so you would then show it in the registration as being hosted by yourself or your company and the IP addresses for your server. Sketchy answer, but just so you know that you will have to pay. Some of the registration companies out there now are not too expensive compared to the original $35 a year fees. HTH -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: Friday, March 01, 2002 7:54 AM To: [EMAIL PROTECTED] Subject: [newbie] domain registration Hi guys a question which has not much to do with mandrakeIf I want to create a website ...let's say...www.i_love_curry.com or any other name..and host it on my PChave I got to pay some of those registrar companies to register the domain name or can I just set it up ?? Thanks everyonethis list is great.. Maurizio __ Abbonati a Tiscali! Con Tiscali By Phone puoi anche ascoltare ed inviare email al telefono. Chiama Tiscali By Phone all' 892 800 http://byphone.tiscali.it
Re: [newbie] domain registration
On Fri, 01 Mar 2002, [EMAIL PROTECTED] wrote: %_Hi guys a question which has not much to do with mandrakeIf I want to create a website ...let's say...www.i_love_curry.com or any other name..and host it on my PChave I got to pay some of those registrar companies to register the domain name You can just set it up as long as you only want private access, as in you have to tell people the IP address. And have them insert the name ip in their hosts file. Else you do need to get the name registered. and you need two nameservers, although some registrars provide them (for a fee) -- Gerald Waugh Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] domain registration
Pay, pay and pay some more...depends on how and what you do with the name, and what name you use, do you have a 24/7 internet broadband connection with a static IP number? (number does not change?) On Friday 01 March 2002 08:53, you wrote: Hi guys a question which has not much to do with mandrakeIf I want to create a website ...let's say...www.i_love_curry.com or any other name..and host it on my PChave I got to pay some of those registrar companies to register the domain name or can I just set it up ?? Thanks everyonethis list is great.. Maurizio __ Abbonati a Tiscali! Con Tiscali By Phone puoi anche ascoltare ed inviare email al telefono. Chiama Tiscali By Phone all' 892 800http://byphone.tiscali.it Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: [newbie] Sound card install problem
On Friday 01 March 2002 03:20 am, you wrote: You are actually looking in the wrong place. KDE Control CenterSystemKDE System Controlaudio,video and game controllers is where your card should be listed. Where you looked always shows no information (at least on my systems). If your card is not listed in the KDE System Control, you have another problem. e. Actually, I do not see a system control. Under Control Center - System, I have Date Time, Konsole, Linux Kernel Config, Login Manager, Printing Manager, and Session Manager. I am using the version of KDE that comes with 8.1, not sure how to check that, but maybe the area you are refering to is in a newer version. Thanks, Jeff Tech Specs: AMD 1.33 Ghz Asus AVA266 MoBo 1009 BIOS Philips Acoustic Edge Sound Card Geforce 2 MX 400 32 MB Graphics 512 DDR RAM Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Fwd: Re: [newbie] Sound card install problem
Accidentally didn't send to the list. Sorry -- Forwarded Message -- Subject: Re: [newbie] Sound card install problem Date: Fri, 1 Mar 2002 09:14:39 -0500 From: Jeff Quandt [EMAIL PROTECTED] To: Robin [EMAIL PROTECTED] On Friday 01 March 2002 04:16 am, you wrote: Hi, Jeff The KDE Control Center - Information - Sound may not always be correct. I have working SB 16 and SB live installed, they show up as no info available too. Try to get out of X and login as root in a text console, run sndconfig and see what happens. HTH Okay, I did that. Here is the output I get. The VLSI|unknown device 1004:0307 │ │ is not supported. As I said this is a Philips Acoustic Edge, PC706 I believe. I was able to install it with a generic SB compatible driver under Icepack 1.1. I had many problems with Icepack however, so I switched to Mandrake. If I decided to get a new card that was Linux compatible, do I use sndconfig to install the driver or what? Thanks, Jeff --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Can´t install on Dell XPS 180n
I have been using Linux for about 6 months, so I have some knowledge about how things work. Although I do not consider myself as an expert user. The answer is yes, I did the floppy using rawrite.exe. I know that both the CD:s (1 and 2) and the floppy work because I did an install last week on an Athlon box that I have, without any problems. Ok, some info about this machine: -Dell XPS 180n, a Pentium Pro machine at 180Mhz with 98 MB RAM. -Matrox Mystique 220 4 MB RAMDAC -Creative SB32 -HD(1) IDE IBM-DAQA-33240 (Master) -HD (2) IDE WDC-AC31600H That makes a total diskspace of about 4.5 GB. Both harddrives are clean, nothing on them. I had win98 working great, but decided to remove it, making space for Mandrake. The filesystem on both are FAT32 right now after format. I flashed the motherboard with the latest driver, while I had win98 and it worked great. No problems there. My idea is to make this a Linux box only, so all the space is going to Linux. I have been removing hardware to see if the install would kick in, but no result there. I got no clue about what is wrong. Some help is needed. /Edvard (Kaj, I don´t mind that you posted it to the list. I thought I already had?) _s_p_r_a_y_ Här börjar Internet! Skaffa gratis e-mail och gratis Internet på http://www.spray.se Anmäl ditt intresse för Spray ADSL bredband! http://www.spray.se/adsl/intresse Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
[newbie] Re: [newbie] domain registration
unfortunately i just found out that in my part of the world broadband connection is a dream which will be available in 1 year time..shit!thank you very much BT...so all my plan has gone bananas...no chance of hosting the site on my computer at home...I will have to use one of those companies which host everything and give you name and everythingany ideas of cheap ones??? Thanks again Maurizio __ Abbonati a Tiscali! Con Tiscali By Phone puoi anche ascoltare ed inviare email al telefono. Chiama Tiscali By Phone all' 892 800http://byphone.tiscali.it Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: sndconfig: soundcard not supported Re: [newbie] Acer 342T soundcard problem.
On Fri, 01 Mar 2002 12:21:57 + Wei Wang [EMAIL PROTECTED] wrote: Thanks. I just ran sndconfig 0.65.0 and was told my sound card ESS IES1969 Solo-1 is not currently supported. I think this means the end of the day. ;-( snip No, it means not supported by OSS, but it seems to be supported by ALSA, see my previous mail ;) -Frans Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Browsing NTFS partitions
Is it possible to browse NTFS partitions from Mandrake 81? It would save me a lot of time moving things from XP to Linux if I didn't have to reboot all the time to find the files I need Thanks, Jeff Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: [newbie] Re: [newbie] domain registration
you do not necessarily have to have bradband. and it is possible to use a dynamic dns server, you just won't have the full domain name of your choice. On Friday 01 March 2002 10:35, you wrote: unfortunately i just found out that in my part of the world broadband connection is a dream which will be available in 1 year time..shit!thank you very much BT...so all my plan has gone bananas...no chance of hosting the site on my computer at home...I will have to use one of those companies which host everything and give you name and everythingany ideas of cheap ones??? Thanks again Maurizio __ Abbonati a Tiscali! Con Tiscali By Phone puoi anche ascoltare ed inviare email al telefono. Chiama Tiscali By Phone all' 892 800http://byphone.tiscali.it Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: [newbie] Browsing NTFS partitions
Jeff Quandt wrote: Is it possible to browse NTFS partitions from Mandrake 81? It would save me a lot of time moving things from XP to Linux if I didn't have to reboot all the time to find the files I need Thanks I mount my ntfs partition (usin mandrake 81, kde), by: -adding a directory in /mnt/ named /mnt/win2000 (full access permissions) -adding a line in /etc/fstab like: /dev/hdb5 /mnt/win2000 ntfs umask=0 0 0 (where hdb5 is the ntfs partition in my system according to mandrake control center) your system should mount ntfs partition at boot I think you can't write to it (I posted that question some days ago and it seems you have to recompile the kernel with experimental options to write to ntfs) bye paolo brusasco Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: [newbie] Sound card install problem
Actually, mine may be an older version (KDE 2.1.1--control center ver 2.0). Did Control center drop that (very useful) function in the later versions? Or, did they put it under another header? Anyone? e. On Fri, 1 Mar 2002 09:09:35 -0500 Jeff Quandt [EMAIL PROTECTED] wrote: On Friday 01 March 2002 03:20 am, you wrote: You are actually looking in the wrong place. KDE Control CenterSystemKDE System Controlaudio,video and game controllers is where your card should be listed. Where you looked always shows no information (at least on my systems). If your card is not listed in the KDE System Control, you have another problem. e. Actually, I do not see a system control. Under Control Center - System, I have Date Time, Konsole, Linux Kernel Config, Login Manager, Printing Manager, and Session Manager. I am using the version of KDE that comes with 8.1, not sure how to check that, but maybe the area you are refering to is in a newer version. Thanks, Jeff Tech Specs: AMD 1.33 Ghz Asus AVA266 MoBo 1009 BIOS Philips Acoustic Edge Sound Card Geforce 2 MX 400 32 MB Graphics 512 DDR RAM Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Browsing NTFS partitions
I mount my ntfs partition (usin mandrake 8.1, kde), by: -adding a directory in /mnt/ named /mnt/win2000 (full access permissions) -adding a line in /etc/fstab like: /dev/hdb5 /mnt/win2000 ntfs umask=0 0 0 (where hdb5 is the ntfs partition in my system according to mandrake control center). your system should mount ntfs partition at boot. I think you can't write to it (I posted that question some days ago and it seems you have to recompile the kernel with experimental options to write to ntfs). bye. paolo brusasco Thanks for the tip. Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: [newbie] Sound card install problem
On Friday 01 March 2002 10:55 am, you wrote: Actually, mine may be an older version (KDE 2.1.1--control center ver 2.0). Did Control center drop that (very useful) function in the later versions? Or, did they put it under another header? Anyone? e. On Fri, 1 Mar 2002 09:09:35 -0500 Well, I found my version to be 2.2.1, so you do have an older version. I searched for system control, but got nothing. Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
[newbie] two MDK 8.0 systems on the same disc
Friday 01 March 2002 -- 09:54 hrs CST the question of the day, If I install two instances of MDK 8.0, which contain identical kernels, passwords and user names...when I mount the portions of the other, to the one running, will I encounter an adverse interaction? The reason for this project: This nine bay tower and LCD monitor is mounted in a truck, I use it for navigation and communication E-mail...sometimes I am on the road without my bag of trics/discs I have an extra 2G Dos partition that I have never realized a requirement for as once planned.I thought if I stripped down a MDK 8.0 system, reformatted to fs2, and installed it there, in one root partition,...I would have a self contained ,bootable repair system , to use in case I botched something on my main system, and rendered it unworkable? I am using Reiser so I need to use the same kernel, my concern is...Would the repair system read the config files etc. from mounted sections of the main system and become confused? I know the operative system reads every partition mounted when you run trics like df -m ...it will give the specifics of the other dormant system on the disc. so it has acess to them all. I also wanted to use the same passwords and user names so the permissions would match on both systems, and avoid confusion on my keyboard inputsbut I cannot determine if these identical genetics would create an atmosphere conductive of a system destroying incestuous relationship. I am not trying to back up my main system...I am trying to make a back up system. ...that is bootable, can send mail, has VI and MC etc , one that I can use both to repair my main MDK 8.0 and to operate ..on those occasions when my crash axe sys admin procedures render the main system defunct... or..does this qualify as just another olly harebrained idea? -- Olly P. Biloxi Mississippi Linux MDK 8.0 and 2.4.3-20 mdk Kmail 2.1.1 ATX Plll 600mhz Asus CUBX ...384m PC133ram Fri Mar 1 10:10:06 EST 2002 Democracy is the recurrent suspicion that more than half of the people are right more than half of the time. -- E. B. White 10:10am up 3 days, 2:42, 2 users, load average: 0.01, 0.04, 0.00 Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
[newbie] mandrake 7.0
Does anyone know if Mandrake 7.0 would work on an Ollivetti Echo P90s? Please reply, Tom. attachment: winmail.dat Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: [newbie] email from command prompt
On Fri, 01 Mar 2002, Michael wrote: %_I am trying to understand what you want This isn't especially clear to me as another newbie but i guess the question you want answered is can mail talk direct to a SMTP server out of your box I am probably way out in left feild as i understand that on a standard setup this is the domain of postfix (or postfix pretending it is sendmail) The question still remains though can mail address a SMTP server on the net directly In my situation i get my mail as POP3 (with fetchmail) and send it as SMTP to my ISP (preconfigured using sendmail) I agree Gerald's reply doesn't address my understanding of this question either More info please Gerald! http://wwwlinuxdocorg/HOWTO/Mail-Administrator-HOWTO-3html#ss31 explains this, To be honest , you need to setup mutt or pine I'll look into it a little more -- Gerald Waugh Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
[newbie] Mandrake Firewall Product
I downloaded the Mandrake Firewall program today I am having trouble connecting to it from another machine I have connected to the machine locally using lynx, but it won't let me change anything Is the download the whole program or is it just demo software? Any suggestions on how to fix it so I can connect to the Web admin interface and set up the machine? -- Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
[newbie] editting gnome themes
How do I edit a Gnome theme? - paul Rodriguez _ Do You Yahoo!? Get your free yahoocom address at http://mailyahoocom Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: Fwd: Re: [newbie] Sound card install problem
On Fri, 1 Mar 2002 09:23:01 -0500 Jeff Quandt [EMAIL PROTECTED] wrote: Accidentally didn't send to the list. Sorry -- Forwarded Message -- Subject: Re: [newbie] Sound card install problem Date: Fri, 1 Mar 2002 09:14:39 -0500 From: Jeff Quandt [EMAIL PROTECTED] To: Robin [EMAIL PROTECTED] On Friday 01 March 2002 04:16 am, you wrote: Hi, Jeff The KDE Control Center - Information - Sound may not always be correct. I have working SB 16 and SB live installed, they show up as no info available too. Try to get out of X and login as root in a text console, run sndconfig and see what happens. HTH Okay, I did that. Here is the output I get. The VLSI|unknown device 1004:0307 │ │ is not supported. It's not supported because Philips refuses to release the information necesary to write a driver : As I said this is a Philips Acoustic Edge, PC706 I believe. I was able to install it with a generic SB compatible driver under Icepack 1.1. I had many problems with Icepack however, so I switched to Mandrake. If I decided to get a new card that was Linux compatible, do I use sndconfig to install the driver or what? I think the 'standard' way is to make sure 'hardrake' and 'kudzu' are set to run on boot, when booting after installing the card it should be automagically set up. You can also run HardDrake later of course. AFAIK the use of sndconfig is advised when HardDrake (from the Mandrake Control Centre) fails. Thanks, Jeff -Frans Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Mandrake wish: multi-media keyboard keys
Hi, is there an easy way to get the keys on multi-media keyboards to work For example sleep buttons, volume dials, application launch buttons, and cd controls The programs that I have seen for this have been very poor and difficult to set up Linux would be particularly well suited for taking advantage of these buttons I remember when I first installed Mandrake on my old Hewlett Packard I was so excited to get real customizable functionality out of those buttons, only to find that they didn't work at all This is an official request/wish: It would be wonderful Mandrake could figure out an *easy* way to set up these buttons and customize them Perhaps similarly to the way that mousedrake let's you test your mouse buttons Press one button, give it an arbitary name and it let's you customize it Would you like to customize another key? Press which key/button you would like to customize and assign a value to it It's almost impossible to find keyboards without these buttons anyway nowadays I was looking at a pretty black IBM (since they are supposedly Linux friendly) keyboard, the Rapid Access keyboard, the only black one they have in stores in my area And to get buttons working on even that one would mean downloading a kernel patch some user wrote and recompiling the kernel Ok, i know whaat I'm asking is probably not as easy as it sounds, but it's those sorts of touches that really go a long way Thank you - Paul Rodriguez _ Do You Yahoo!? Get your free yahoocom address at http://mailyahoocom Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: [newbie] Re: [newbie] domain registration
NOT TO PLUG ANYONE BUT GODADDY.COM REGISTERED A NUMBER OF NAMES FROM $6.95 - $8.95 PER YEAR. THEY HAVE OTHER CHEEP SERVICES (THEY SEEM TO FAVOR VOLUME OVER PRICE). EVEN FOR ONE NAME $8.95 IS DAMN GOOD. THERE ARE SEVERAL SITES THAT COMPARE DNS AND HOSTING SITES (CNET AND INTERNET HAVE TWO- PC WORLD BEST OF 2000 ISSUE-DEC?- HAD A FEW STILL ON THE NET- SHOULD BE A QUICK SEARCH). IF YOU WANT THE REALLY GOOD LIST OF SITES I'LL HAVE TO LOOK THEM UP SO PLEASE DROP A LINE IF YOU WANT AN EXAUSTIVE LIST/ INFO. I THINK GODADDY ALSO GIVES OUT A FREE MONTH OF SOMTHING FOR REFERING THEM SO UNLESS YOU HAVE OLD FRIENDS USING THEM YOU COULD SAVE A HUNGRY STUDENT A FEW $'S BY LISTING ME AS THE REFERAL, BUT THATS NOT WHY I MENTIONED THEM. YOU SHOULD MAKE SURE THAT THE CHEEP PLACES (E.G. THE $7.77 FOLKS) ACTUALLY PUT YOUR NAME ON THE ICANN REGISTRATION AND NOT THEIRS. ALSO SEE WHO THEY GO THROUGH, WHY GO TO A TUCOWS AFFILIATE WHEN YOU CAN GO TO TUCOWS. NETWORK AND REGISTER HAVE NICE SEARCH FUNCTIONS BUT OVERCHARGE AND OTHER NASTINESS (REGISTER PUTS AN AD ON YOUR HOMEPAGE OR YOU PAY TO TRANSFER). CONSIDER THE TOTAL PRICE (REGISTRATION, PARKING, TRANSFER, SETUP, HOSTING, ET AL) SOMETIMES THE ALL IN ONE PRICES MAKE SENSE (AGAIN GODADDY LOOKED QUITE GOOD ON THEIR LAST SPECIAL). MANY PREFER THEIR ISP FOR E-COMM AS THEY WILL PROBABLLY BE AROUND NEXT MONTH (WELL THAT DOES DEPEND). I HAVE TONS OF NOTES OF THIS STUFF YOU ARE WELCOME TO IF YOU ASK. REM: $35 FOR A HAILSTORM/PASSPORT/ BIG BROTHER GATES OWNS ALL OF YOU FOREVER AND HAS SUCH GOOD INTENTIONS, MS B BUSINESS, BUSINESS CARD SITE AND NAME FOR $30 NOT ONLY SELLS YOUR SOUL BUT YOUR VISITORS/ CUSTOMERS SOULS UP THE RIVER, IN PERPETUITY. XP IS NOT OSX (BUT SOOO ORIGINAL)/ NOT UNIX BUT 12XU THE STATE OF YOUR PROPERTY(WHERE P= $PROPERITY TOUCHED BY .NET AND X=-P/0. WHEN THOSE WHO ACTUALLY MAKE NOTHING AND BELIEVE THAT GREED ID GOOD GET ALL THE CASH THEY ARE A KING WHO CHARGE A KINGS RANSOM (GO SCOTT) RANT RANT [END RANT] [RUN RAVE] GOOD LUCK AND SORRY FOR THE ALL CAPS- KBRD DONE BEED BROKED IN DA KEYS HOLE THIS AM. MEA CULPA AD INFERNAM DOES ANY ONE KNOW HOW TO UNSCRIBE FROM THIS LIST (HAVE TRIED THE OBVIOUS) DOES LAUD = LOUD OR LAUDITORY MIA CULPA INCALI LA MUCHO LAMO ME BE (S)WELL... OH YEAH AS TO NEXT NOTE YOU CAN GET THE NAME YOU WANT AND ALAIS IT TO A DYNDNS (DYNDNS.ORG ET AL) WHICH YOU LOG YOUR DYN IP TO AND SO THE END USER USES A STATIC URL. ALL THIS CAN BE FOUND FREE... ALSO CAN'T YOU GET SATILLITE BROADBAND EVERYWHERE? THEY GET CNN IN KABUHL... on 03.01.02 07:35 AM, [EMAIL PROTECTED] at [EMAIL PROTECTED] wrote: unfortunately i just found out that in my part of the world broadband connection is a dream which will be available in 1 year time..shit!thank you very much BT...so all my plan has gone bananas...no chance of hosting the site on my computer at home...I will have to use one of those companies which host everything and give you name and everythingany ideas of cheap ones??? Thanks again Maurizio __ Abbonati a Tiscali! Con Tiscali By Phone puoi anche ascoltare ed inviare email al telefono. Chiama Tiscali By Phone all' 892 800http://byphone.tiscali.it Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Kernel Decision - Which one?
Thanks to everyone that pointed me towards the list archive search page. That proved very helpful and I am sure it will be of more help in the future. I notice that there are already newer kernels than the one I was going to update to (2.4.8.34). I am mainly looking for one with security updates to the one that came with my 8.1 powerpack. That appears to be 2.4.8.34, but I am reading that newer kernels may fix problems that I may not be aware of (virtual memory, faster, supermount(?), etc.). Are any kernels newer than 2.4.8.34 just as stable as it is? Differences? With the search page I was not able to find a message that compared the various versions starting with (Mandrake-recommended?) 2.4.8.34. Also where can I download this kernel version, and is it safer (iow which way is my file going to arrive without corruption?) to download with browser (konq, or ???), ftp program (???) or with gnome transfer manager? I would like to bring my system in line with the various updates available through software manager/mandrake update believe I am ready to take the first step (which seems the most daunting but should truly be the first step?): installing a newer kernel alongside my current one. Then I can install the nVidia kernel/glx. It seems there is already a version made for 2.4.8.34 which gives a point to that kernel but I believe I know how to do the make thing on the raw files if need arises. Thanks in advance, -- Wes Gregg [EMAIL PROTECTED] Registered Linux User # 252649 AMD, Mandrake, Intercooled T-Type, Subaru, and Cannondale Doing it Better - Just a little bit different. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Can't get Leafnode to start on boot
I haven't been able to get Leafnode to start when Linux boots When I try to start it in Mandrake Control Center, I get a 'unrecognized service' message However if I start it from a shell prompt it works fine Does anyone have any ideas as to why it doesn't start on boot? Thanks Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
[newbie] HDD Upgrade Question
Hi I want to upgrade my old 1.2gig HDD to a new 20gig HDD. I will be doing a fresh install of mandrake on the new HDD. The new HDD will have a / and /home mount points. The question is: If I have my old HDD as a slave to copy file onto the new HDD which also has a / and /home will this work. Im thinking that linux will probably complain having two /home mount points? Im asking because I want to copy files from my old /home into my new /home on my new disk. I have no means of backing up my old HDD onto different media. The old 1.2gig once the files have been copied will be put into another PC. Also another quick question, what percentage of 20gig would be a good idea to allocate / and /home? Thanks Mark Evans Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
[newbie] resizing partitions
How do I resize partitions on an existing install? I allocated way too much space for swap, and with 512MB Ram, I have yet to even touch the swap space So I want to reclaim some of that space Can I resize it without trashing everything? On a related note, if anyone knows of a good tutorial on Linux point, me to it I don't want to waste everyone's time on silly questions like this one, but I have not found the answers in the archives (When I search I seem to hit everything but the archives) To clarify, I don't mean an install tutorial, I handled that fine I mean something that helps with day to day operation and maintainence Thanks a lot Jeff Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: [newbie] resizing partitions
Also you can do a google search for linux help howto tutorial or whatever and it will come up with all kinds of stuff for you. On Fri, 1 Mar 2002 13:53:15 -0500 Jeff Quandt Jeff Quandt [EMAIL PROTECTED] wrote: How do I resize partitions on an existing install? I allocated way too much space for swap, and with 512MB Ram, I have yet to even touch the swap space. So I want to reclaim some of that space. Can I resize it without trashing everything? On a related note, if anyone knows of a good tutorial on Linux point, me to it. I don't want to waste everyone's time on silly questions like this one, but I have not found the answers in the archives. (When I search I seem to hit everything but the archives...) To clarify, I don't mean an install tutorial, I handled that fine. I mean something that helps with day to day operation and maintainence. Thanks a lot. Jeff -- °°° Mandrake Linux 8.1 Kernel 2.4.8-26mdk KDE 2.2.1 Evolution 1.0.2 David L. Steiner Registered Linux User #262493 Homepagewww.davidlsteiner.com Email [EMAIL PROTECTED] °°° Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Re: [newbie] domain registration
Congrats ross! You just made it onto my junk emailer's list. Puleeze learn the proper use of the caps lock and the paragraph. Thanks for your attention, aron -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ross Paige Sent: Friday, March 01, 2002 12:46 PM To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: [newbie] Re: [newbie] domain registration NOT TO PLUG ANYONE BUT GODADDY.COM REGISTERED A NUMBER OF NAMES FROM $6.95 - $8.95 PER YEAR. THEY HAVE OTHER CHEEP SERVICES (THEY SEEM TO FAVOR VOLUME OVER PRICE). EVEN FOR ONE NAME $8.95 IS DAMN GOOD. THERE ARE SEVERAL SITES THAT COMPARE DNS AND HOSTING SITES (CNET AND INTERNET HAVE TWO- PC WORLD BEST OF 2000 ISSUE-DEC?- HAD A FEW STILL ON THE NET- SHOULD BE A QUICK SEARCH). IF YOU WANT THE REALLY GOOD LIST OF SITES I'LL HAVE TO LOOK THEM UP SO PLEASE DROP A LINE IF YOU WANT AN EXAUSTIVE LIST/ INFO. I THINK GODADDY ALSO GIVES OUT A FREE MONTH OF SOMTHING FOR REFERING THEM SO UNLESS YOU HAVE OLD FRIENDS USING THEM YOU COULD SAVE A HUNGRY STUDENT A FEW $'S BY LISTING ME AS THE REFERAL, BUT THATS NOT WHY I MENTIONED THEM. YOU SHOULD MAKE SURE THAT THE CHEEP PLACES (E.G. THE $7.77 FOLKS) ACTUALLY PUT YOUR NAME ON THE ICANN REGISTRATION AND NOT THEIRS. ALSO SEE WHO THEY GO THROUGH, WHY GO TO A TUCOWS AFFILIATE WHEN YOU CAN GO TO TUCOWS. NETWORK AND REGISTER HAVE NICE SEARCH FUNCTIONS BUT OVERCHARGE AND OTHER NASTINESS (REGISTER PUTS AN AD ON YOUR HOMEPAGE OR YOU PAY TO TRANSFER). CONSIDER THE TOTAL PRICE (REGISTRATION, PARKING, TRANSFER, SETUP, HOSTING, ET AL) SOMETIMES THE ALL IN ONE PRICES MAKE SENSE (AGAIN GODADDY LOOKED QUITE GOOD ON THEIR LAST SPECIAL). MANY PREFER THEIR ISP FOR E-COMM AS THEY WILL PROBABLLY BE AROUND NEXT MONTH (WELL THAT DOES DEPEND). I HAVE TONS OF NOTES OF THIS STUFF YOU ARE WELCOME TO IF YOU ASK. REM: $35 FOR A HAILSTORM/PASSPORT/ BIG BROTHER GATES OWNS ALL OF YOU FOREVER AND HAS SUCH GOOD INTENTIONS, MS B BUSINESS, BUSINESS CARD SITE AND NAME FOR $30 NOT ONLY SELLS YOUR SOUL BUT YOUR VISITORS/ CUSTOMERS SOULS UP THE RIVER, IN PERPETUITY. XP IS NOT OSX (BUT SOOO ORIGINAL)/ NOT UNIX BUT 12XU THE STATE OF YOUR PROPERTY(WHERE P= $PROPERITY TOUCHED BY .NET AND X=-P/0. WHEN THOSE WHO ACTUALLY MAKE NOTHING AND BELIEVE THAT GREED ID GOOD GET ALL THE CASH THEY ARE A KING WHO CHARGE A KINGS RANSOM (GO SCOTT) RANT RANT [END RANT] [RUN RAVE] GOOD LUCK AND SORRY FOR THE ALL CAPS- KBRD DONE BEED BROKED IN DA KEYS HOLE THIS AM. MEA CULPA AD INFERNAM DOES ANY ONE KNOW HOW TO UNSCRIBE FROM THIS LIST (HAVE TRIED THE OBVIOUS) DOES LAUD = LOUD OR LAUDITORY MIA CULPA INCALI LA MUCHO LAMO ME BE (S)WELL... OH YEAH AS TO NEXT NOTE YOU CAN GET THE NAME YOU WANT AND ALAIS IT TO A DYNDNS (DYNDNS.ORG ET AL) WHICH YOU LOG YOUR DYN IP TO AND SO THE END USER USES A STATIC URL. ALL THIS CAN BE FOUND FREE... ALSO CAN'T YOU GET SATILLITE BROADBAND EVERYWHERE? THEY GET CNN IN KABUHL... on 03.01.02 07:35 AM, [EMAIL PROTECTED] at [EMAIL PROTECTED] wrote: unfortunately i just found out that in my part of the world broadband connection is a dream which will be available in 1 year time..shit!thank you very much BT...so all my plan has gone bananas...no chance of hosting the site on my computer at home...I will have to use one of those companies which host everything and give you name and everythingany ideas of cheap ones??? Thanks again Maurizio __ Abbonati a Tiscali! Con Tiscali By Phone puoi anche ascoltare ed inviare email al telefono. Chiama Tiscali By Phone all' 892 800http://byphone.tiscali.it Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Can't get Leafnode to start on boot
On Fri, 2002-03-01 at 12:23, Jim Dawson wrote: I haven't been able to get Leafnode to start when Linux boots When I try to start it in Mandrake Control Center, I get a 'unrecognized service' message However if I start it from a shell prompt it works fine Does anyone have any ideas as to why it doesn't start on boot? Thanks have you tried making an entry in rclocal so that it's started at boot time? -- daRcmaTTeR Registered Linux User 182496 Mandrake 82beta1 - 10:05am up 2 days, 18:52, 1 user, load average: 014, 032, 051 Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: [newbie] Kernel Decision - Which one?
For doc purposes and correction let's post this to the list too, didn't realize i didn't send it to begin with On Fri, 2002-03-01 at 13:31, Wes Gregg wrote: Also where can I download this kernel version, and is it safer (iow which way is my file going to arrive without corruption?) to download with browser (konq, or ???), ftp program (???) or with gnome transfer manager? If you follow the download links on Mandrake's site to the i586 81 version, they will take you to the /Mandrake/81/i586/ directory of that particular mirror The 248-34 kernel rpm's should be in the /mandrake/updates/81/RPMS directory If they aren't, check another mirror Other non-mandrake specific kernels are said to work very well I know plenty of people who use non-mandrake kernels and say they work excellently in Mandrake, but I would recommend you start with the Mandrake ones first as they are much easier to install (RPM's) and known for sure to work You can find all sorts of non-mandrake tweaked kernel versions at http://wwwkernelorg I would like to bring my system in line with the various updates available through software manager/mandrake update believe I am ready to take the first step (which seems the most daunting but should truly be the first step?): installing a newer kernel alongside my current one Just to clarify (not sure if I understood you correctly, but) You don't want to use MandrakeUpdate or rpmdrake to upgrade or install a new kernel (good for everything but the kernel) Follow the steps at the following link to do upgrade/install a Mandrake kernel from RPM (pretty easy) http://wwwmandrakesecurenet/en/docs/magicphp Then I can install the nVidia kernel/glx It seems there is already a version made for 24834 which gives a point to that kernel but I believe I know how to do the make thing on the raw files if need arises The Nvidia drivers are fairly easy to install also, go with the source rpm's that way you don't have to worry if it is the right kernel or not Thanks in advance, Good luck - Paul _ Do You Yahoo!? Get your free yahoocom address at http://mailyahoocom Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: [newbie] Kernel Decision - Which one?
On Fri, 2002-03-01 at 16:05, Paul Rodríguez wrote: Just to clarify (not sure if I understood you correctly, but..) You don't want to use MandrakeUpdate or rpmdrake to upgrade or install a new kernel (good for everything but the kernel). Follow the steps at the Right. That much I know. I assume I will need to do this with the graphic desktop disabled or can I do it in KDE? Actually, it doesn't matter. From the command line definately, but you can do it from within KDE just as well. - Paul R _ Do You Yahoo!? Get your free yahoo.com address at http://mail.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
[newbie] Proxy Server
I have been reading a lot about setting up Linux to be a proxy server for broadband service to a network of computers I am trying to set up an home network system What I am wondering is: what is the minimum hardware requirement to run a Linux proxy server? DO I need a Pentium class machine or will an old 486 work? Will an older/slower powered machine affect the braodband access speed? Doug Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: [newbie] Kernel Decision - Which one?
There is some lack of understanding on my part about whether or not I am downloading the correct kernel I understand that the enterprise is for multiple cpu's (I only have one 650mHz Athlon) so I don't want that one There is also a _third_ kernel there, it is smp What is that one for, do I need it also along with the file I am downloading? Lastly (for now GRIN) there is a headers file which seemed to small to be the kernel (12 meg) but is it also something I might need? This is more confusing than I thought I'm honestly not sure what the enterprise kernel is all about, but it's safe to say that's not the one you're looking for The smp (Symmetric MultiProcessor) kernel is for motherboards with two processors It's really not too tough, though, just scary at first Read through the link I sent you ( http://wwwmandrakesecurenet/en/docs/magicphp ) once before going through with anything The files you are going to want are the kernel, kernel-source, kernel-headers, and kernel-doc Also lm_utils and lm_utils-devel You should be fine, don't worry about it - Paul Rodriguez _ Do You Yahoo!? Get your free yahoocom address at http://mailyahoocom Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
[newbie] Accessing SSH login through Webmin
Hello out there .. I am having trouble accessing my work PC with LM 8.1 through the SSH Login feature of Webmin from any computer. I get random errors from each machine I try to use (most of them say they are java-related). I have Bastille installed and running, and allowing people to access port 22 for the SSH. I also have portsentry running. When I check the /etc/hosts.deny file, I see the machine addresses of the machines which I try to access SSH from. Anyone have any ideas why this isn't working? Thanks! Terry Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: [newbie] Kernel Decision - Which one?
I notice that there are already newer kernels than the one I was going to update to (24834) I am mainly looking for one with security updates to the one that came with my 81 powerpack That appears to be 24834, but I am reading that newer kernels may fix problems that I may not be aware of (virtual memory, faster, supermount(?), etc) The current cooker kernel 2417-19 seems pretty stable I am running it on my test machine now Supermount works fine, and the VM manager makes it noticeably faster However with 82 seemingly only weeks away Maybe you might like to wait until it all gets finalised In the meantime 248-34 is perfectly functional, and has the security fixes Also where can I download this kernel version, and is it safer (iow which way is my file going to arrive without corruption?) to download with browser (konq, or ???), ftp program (???) or with gnome transfer manager? Use wwwrpmfindnet to locate any cooker package or standard package For downloading individual RPM's I find konqueror perfectly adequate For downloading complete ISO's you really need a proper download application with a resume facility gFTP works best for me I would like to bring my system in line with the various updates available through software manager/mandrake update believe I am ready to take the first step (which seems the most daunting but should truly be the first step?): installing a newer kernel alongside my current one Just follow the instructions on the Mandrake upgrade site and you will be fine Then I can install the nVidia kernel/glx It seems there is already a version made for 24834 which gives a point to that kernel but I believe I know how to do the make thing on the raw files if need arises You do not need to upgrade the NVIDIA-GLX rpm since that is not release dependent Just get the NVIDIA-kernel file from wwwmandrakeuserorg download section HTH derek Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: [newbie] mandrake 7.0
I've run the 7.0 486 optimized version on a P90 (packard hell) and it worked just fine. The only item built in was a 1M CL video card. So, the answer is probably, depending on what hardware you have plugged into your Olivetti. If your hardware is pretty standard stuff I'd say give it a try, if you have non-ide drives you might want to use another distro for easier setup. If you have the 486 optimized version I think you should use that one instead of the Pentium version--in my experience it works better with the sloow Pentiums. It'll be a learning experience because you're going to have to do a lot of work setting up your hardware. BTW, I have a working P75 with the 486-7.0 sitting in my garage, so it works on even slower machines. e. On Fri, 1 Mar 2002 16:24:01 - Tom Harris [EMAIL PROTECTED] wrote: Does anyone know if Mandrake 7.0 would work on an Ollivetti Echo P90s? Please reply, Tom. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] crontab no space on device?
After running the edit command for the crontab I get: $ crontab -e /tmp/crontab7577: No space left on device Why would this be? I only have one command listed in the crontab - paul rodriguez _ Do You Yahoo!? Get your free yahoocom address at http://mailyahoocom Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
[newbie] just a test, do not bother to read me
Just a test message Setting up a new email progam anc making sure it's plain text and all that good stuff - Skippi On The Fly Photography http://204EastSouthcom Meditation -- Yoga -- Linux -- Muffins The Secrets of Life -BEGIN GEEK CODE BLOCK- Version: 312 GAT d-(?) s: a C++ L++(+++) P E- W++ !N o? K- w--- o M+ PS+ PE++ Y+ PGP- t++ 5+++ X++ R+ tv-- b++ DI D+ G e+ h+ r- y++ --END GEEK CODE BLOCK-- Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
[newbie] test message
testing new account, sorry. to work, or not to work. that is the question if (work) { hurray; } else { do_whine_a_little; try_again; } Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: [newbie] resizing partitions
Yes, you can resize the SWAP partition using DiskDrake, ofcourse you must be root to do that. Just load the DiskDrake, click on the (green) swap partition and then on the left-hand side of the DiskDrake the option 'resize' (or similar) will appear. click on it and it will give you a 'drag bar' (or you can enter the number) that will allow you to choose how much space you need to have allocated for your swap partition. It doesn't damage your system since you have plenty of RAM memory. I have reduced mine to 100mb swap (from 200) with 128 MB RAM. Works perfect. However, the free space will probably be left in between your new swap and your (i am assuming you have it setup like this) /home partition. You might wanna mount that free space in between to a new /directory. Hope that helps, Zlatko Savic --- Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away. - Antoine de Saint Exupery Dennis Myers [EMAIL PROTECTED] wrote: On Friday 01 March 2002 21:00, you wrote: On Friday 01 March 2002 01:53 pm, you wrote: How do I resize partitions on an existing install? I allocated way too much space for swap, and with 512MB Ram, I have yet to even touch the swap space. So I want to reclaim some of that space. Can I resize it without trashing everything? __ FREE voicemail, email, and fax...all in one place. Sign Up Now! http://www.onebox.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] resizing partitions
On Friday 01 March 2002 12:53, Jeff Quandt wrote: How do I resize partitions on an existing install? I allocated way too much space for swap, and with 512MB Ram, I have yet to even touch the swap space So I want to reclaim some of that space Can I resize it without trashing everything? On a related note, if anyone knows of a good tutorial on Linux point, me to it I don't want to waste everyone's time on silly questions like this one, but I have not found the answers in the archives (When I search I seem to hit everything but the archives) To clarify, I don't mean an install tutorial, I handled that fine I mean something that helps with day to day operation and maintainence Thanks a lot Jeff file:///usr/share/doc/mandrake/en/userhtml/diskdrakehtml may answer your resizing question and file:///usr/share/doc/mandrake/en/indexhtml may answer some of your future questions My favourite recommendations are a) These 2 books by Mandrake which you have on your hard drive, accessible from file:///usr/share/doc/mandrake/en/indexhtml I even went so far as to download them in pdf format from the Mandrake website and print them our in a 4-in-1 format The troubleshooting section in the reference manual has come in very handy many times! I've apprecitated having that in a printed format :-) b) http://wwwmandrakeuserorg Good luck, Narfi Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
RE: [newbie] Accessing SSH login through Webmin
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Terry Sent: March 1, 2002 1:52 PM To: [EMAIL PROTECTED] Subject: [newbie] Accessing SSH login through Webmin Hello out there .. I am having trouble accessing my work PC with LM 8.1 through the SSH Login feature of Webmin from any computer. I get random errors from each machine I try to use (most of them say they are java-related). I have Bastille installed and running, and allowing people to access port 22 for the SSH. I also have portsentry running. When I check the /etc/hosts.deny file, I see the machine addresses of the machines which I try to access SSH from. Anyone have any ideas why this isn't working? Thanks! Terry A few questions: The computer you are trying to connect to is running what OS? The computer you are trying to connect from is running what OS? Have you tried connecting from shell? _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Upgrading Mandrake 8.1 to XFree86-4.2.0 on a Dell i8100
Hi, I have Mandrake 81 on a Dell i8100 with an ATI Radeon video card It is currently running XFree86-410 and only has very generic support for the card Apparently there is a better driver in XFree86-420 Am I on the right track? I have been fining quite a few of the files that are needed however each time I find one there are more dependencies I am happy to keep finding more eg: libtinfoso5 - but what about the programs such as libXvso1 that are needed by other programs on the system? Has anyone upgraded Mandrake 81 to XFree86-420? Can it be done? Should I upgrade to a whole new Mandrake beta? Am I using the right commands here? (See output below) Looking forward to some feedback! Thanks Walter ~~~ 164 root@psybernet:/home/walter/wldownloads/x (03:19:51) # ls ncurses-ext-52-22i386rpm XFree86-420-1i386rpm XFree86-fonts-420-5i386rpm xauth-420-01i686rpm XFree86-common-420-1i386rpm XFree86-libs-420-7mdki586rpm 165 root@psybernet:/home/walter/wldownloads/x (03:19:56) # rpm -U *rpm error: failed dependencies: libtinfoso5 is needed by ncurses-ext-52-22 libtinfoso5 is needed by XFree86-420-1 XFree86-fonts-base = 420 is needed by XFree86-fonts-420-5 XFree86 = 410 is needed by XFree86-75dpi-fonts-410-17mdk XFree86 = 410 is needed by XFree86-100dpi-fonts-410-17mdk XFree86-libs = 410-17mdk is needed by XFree86-devel-410-17mdk XFree86-libs = 410-17mdk is needed by XFree86-xfs-410-17mdk libXvso1 is needed by chromium-0912-3mdk libXvso1 is needed by tuxracer-061-4mdk libXvso1 is needed by kdemultimedia-221-2mdk libXvso1 is needed by rocksndiamonds-200-4mdk libXvso1 is needed by mures-04-2mdk libXvso1 is needed by Maelstrom-301-10mdk libXvso1 is needed by armagetron-0149-1mdk libXvso1 is needed by gltron-059-10mdk libXvso1 is needed by libSDL_net12-122-1mdk libXvso1 is needed by libSDL_image12-120-2mdk libXvso1 is needed by csmash-062-1mdk libXvso1 is needed by xmovie-19-4mdk libXvso1 is needed by xmms-smpeg-034-4mdk libXvso1 is needed by libSDL_mixer12-120-3mdk libXvso1 is needed by nethack_falconseye-331_jtp_19-3mdk libXvso1 is needed by libSDL12-122-1mdk libXvso1 is needed by libsmpeg04-044-3mdk libXvso1 is needed by vlc-0283-1mdk libXxf86dgaso1 is needed by chromium-0912-3mdk libXxf86dgaso1 is needed by tuxracer-061-4mdk libXxf86dgaso1 is needed by kdemultimedia-221-2mdk libXxf86dgaso1 is needed by rocksndiamonds-200-4mdk libXxf86dgaso1 is needed by mures-04-2mdk libXxf86dgaso1 is needed by Maelstrom-301-10mdk libXxf86dgaso1 is needed by armagetron-0149-1mdk libXxf86dgaso1 is needed by gltron-059-10mdk libXxf86dgaso1 is needed by libSDL_net12-122-1mdk libXxf86dgaso1 is needed by libSDL_image12-120-2mdk libXxf86dgaso1 is needed by csmash-062-1mdk libXxf86dgaso1 is needed by xmms-smpeg-034-4mdk libXxf86dgaso1 is needed by libSDL_mixer12-120-3mdk libXxf86dgaso1 is needed by nethack_falconseye-331_jtp_19-3mdk libXxf86dgaso1 is needed by libSDL12-122-1mdk libXxf86dgaso1 is needed by libsmpeg04-044-3mdk libXxf86dgaso1 is needed by vlc-0283-1mdk 166 root@psybernet:/home/walter/wldownloads/x (03:20:26) # Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom