Omer,
Here is a good URL to accomplish this.
http://www.cisco.com/warp/public/125/26.html
Here are a few hints...
1. encapsulation frame-relay cisco, ietf Which is the default?
2. frame-relay lmi-type ansi, cisco, q933a
*If you don't specify lmi-type and your code is 11.2F and above what
2500 series routers are fine, I just bought two for my home lab. They're
cheap (in terms of Cisco hardware) and easy to find, especially on ebay.
2600's can get expensive. The main thing to remember is: get IP enterprise
IOS, and make sure the routers you get have the interfaces you want. If
Folks:
Recently I completed CCNA 1.0 (822). My plan is to complete CCDA 1.0 before
the July 31 changeover to CCDA 2.0.
Does this make any sense ? Will I have to do them all over again after July
31 when CISCO switches to VERSION 2.0 ?
I bought lots of CCNP 1.0 books a few months ago and I am
Folks:
Recently I completed CCNA 1.0 (822). My plan is to complete CCDA 1.0 before
the July 31 changeover to CCDA 2.0.
Does this make any sense ? Will I have to do them all over again after July
31 when CISCO switches to VERSION 2.0 ?
I bought lots of CCNP 1.0 books a few months ago and I am
I had talked to Cisco about this, because at one time they had claimed thier
VPN software was 2k compatible. Well I was told that their software wasn't
compatible (they imediatly removed the claim from their site) and that the
PIX would support the MS 2k VPN client in the summer. At this time I
Hi,
I'm planning to take it next week.
I had go through the Office Exam guide for CCNA 1.0 and took some sample
test questions on it.
Also, I've read the ICND text book.
I don't know how much difference between 1.0 and 2.0.
I'd like to ask if it is enough to take it now.
If not, what else
goto http://www.fatkid.com/html/frame_relay_intro.html this will explain
how it works and sample configs
"M Z" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Would anyone kindly share how to config a Cisco router to act as a FR
switch.
Thanks in advance.
Hi,
I have users dial in to AS5300s, using Cisco Secure as first authentication,
AXENT token server as second authentication. When users (using token cards)
dials in, they are chanllenged by AXENT. The problem is sometimes, they are
prompted to enter username and password after token
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
I didn't see any replies, so I'll throw some chum out ;-)
I have a RAS box that uses 198.168.X.X coming in from the
field and my router is using 10.X.X.X .
OK, tho I /hate/ RFC1918 addys...
Your guys "in the field" are using dialup and
e=mc^2 has been my favorite, but now I'm hearing that one researcher has
exceeded the speed of light, so now I don't know what to believe anymore.
Irwin
-Original Message-
From: tazar Ing [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 12, 2000 4:29 PM
To: [EMAIL PROTECTED]
Subject:
Yeah, same story I heard...although I wouldn't say the lab is a
killer...piece 'o cake! lol NOT!
-Brad Ellis
CCIE#5796
"Jim Brinksma" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
From what I understand Cisco started the first CCIE at 1025 because 1024
was
Try the following:
http://grouper.ieee.org/groups/802/index.html - IEEE 802 standards comittee
page
Alteon's web site has a lot of good resources as well.
Irwin
-Original Message-
From: Farooq Ali [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 14, 2000 10:21 AM
To: cisco
Hello Everyone,
I will appreciate if someone can give the addresses of
online bookstore from where I can buy Cisco books at a
discount.
Thanks.
Steve
__
Do You Yahoo!?
Send instant messages with Yahoo! Messenger.
http://im.yahoo.com/
Since the majority of the CCNP tests are going to be retired at the end of
July, are there any new books slated to be published in the very near
future? I noticed a new CLSC replacement on Amazon, but that was the only
one. Does Cisco Press have the new books for CCNP 2.0?
Thanks,
Timothy J.
4 meg memeory upgrade (NVRAM) and new IOS version11. or above...
your router has a cutdown ios which di-ables certain functionality upgrade
NVRAM download latest IOS image..12.9 is a goody
and wham
regards steve
From: "Alex" [EMAIL PROTECTED]
Reply-To: "Alex" [EMAIL PROTECTED]
To: [EMAIL
From bcran ciscopress (Catherine Paquet), 'the main difference between a
rotary group and a dialer profile is that a physical interface participates
in only one rotary group. With a dialer profile, a physical interface can
belong to many different pools'
Hope this help.
Eric
Mingzhou Nie
I agree. I always use ping first, BUT =P
The question doesn't describe the environment. In a worse case type
senerio
you could be testing tcp/ip connectivity through a firewall or router in
which upd and icmp are blocked but tcp isn't.
Or is that crazy talk?
Many firewalls do have UDP and
I keep an updated list here:
http://www.lovegrove.co.uk/bgl/books.htm
If anyone spots titles not included there, drop me a line.
Regards,
Ben
--- "Hornbeck, Timothy" [EMAIL PROTECTED] wrote:
Since the majority of the CCNP tests are going to be retired at the
end of
July, are there any new
This is a sample working configuration
Peer :
ntp authentication-key 1 md5 key
ntp authenticate
ntp trusted-key 1
ntp server 192.168.233.225 key 1
ntp server 192.168.233.226 key 1
ntp server 192.168.233.242 key 1
end
-Original Message-
From: Clifton Stewart [mailto:[EMAIL PROTECTED]]
From memory you need the IP Plus IOS to run OSPF on a 1601-R... More memory too I
suspect :-)
Cheers,
Pete.
"Mohamed Heeba" [EMAIL PROTECTED] 06/13/00 04:31PM
Dear Guys
i was trying to enable OSPF on a Cisco 1601R router
when i got a message "unknown routing protocol"
what the hell
This doesn't answer your question directly but might give your some insight.
Dear Group:
You are receiving this message because you expressed an interest in joining
a CCNP study group.
The message below is from the author/owner of Winflash. He has agreed to
host our questions to make it more
How would it violate this?
"ShaQ Patel" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
NDA ?
John Huston wrote:
I am curious if anyone would be interested in writing and trading
questions
for the CLSC, CIT and BCRAN tests? I am using a program called
Caslow is excellent. Here's another gem:
Routing TCP/IP Vol I by Jeff Doyle
http://www.amazon.co.uk/exec/obidos/ASIN/1578700418/bensbookmar/026-9534645-4584411
or
http://www.amazon.com/exec/obidos/ASIN/1578700418/bensbookmarkandn/102-0114016-4818544
Regards,
Ben
--- Russell Lusignan [EMAIL
Dear gang:
I have the following situation:
SiteA---SiteB---SiteC
Site A, B, C are interconnected like above. Now I need to
deploy ISDN backup. SiteC is a Cisco 3660, Site B, C are Cisco
Tom,
He did say that he was already a CCNP (therefore also a CCNA), so I was
right (ooh - it's so good to be right for a change ;)
Mark.
Mark,
Thats is not quite all that you have to do. In order to get onto the CCDP
exam track you have to be a CCNA and CCDA. From that point you must then
Make sure to read
Internetworking Technologies Handbook
and
Interconnections by Radia Perlman
They are not IOS books at all, but you will need the general knowledge in
them to pass the written.
- Original Message -
From: "Ben Lovegrove" [EMAIL PROTECTED]
To: "Russell Lusignan" [EMAIL
Dear gang:
I have the following situation:
SiteA---SiteB---SiteC
Site A, B, C are interconnected like above. Now I need to deploy ISDN
backup. SiteC is a Cisco 3660, Site B, C are Cisco 1750 and have only one
BRI interface each. Can I use the ISDN BRI link between SiteA
A while back I was working in getting a 2502 up and running. It had old
boot proms in it, 8 meg flash and 8 meg of ram. The old boot roms did not
recognize the flash.
I managed to get it going by getting it to boot via tftp via a unix box,
going through a 1005 first to get to the unix box.
My
http://www.networkking.net/CCDA/
"Day, David" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED].
..
Does anyone have the DCN practice exam??
Thank you in advance,
David M. Day, MCSE, CCNA
AllegianceTelecom, inc
NOCC - Tier II Data Technical Support Engineer
I may have to abdicate the throne:)
Chuck Larrieu privately pointed out an error in my post:
The correct formula for OSPF's calculating cost is 100 Mbps/bandwidth.
Thanks Chuck!! I am also glad that I did not "James Cameron" on this
one!!
Charles
-Original Message-
From:
Hello Everybody
i have taken the CCIE Dial-Up Drake Test and my score is 64% int the first
way. I will try it next week again and i think i will pass.
Greetings
Hans-Walter
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list
How about named access lists?
"Palikhey, Niraj" wrote:
Hi,
I am trying to understand something with access-lists. They say that when
you put in a new entry to an existing access-list, it will be written at the
end of the existing list. So If I have a deny any any at the end of the list
and
[EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Ladies and gents,
I received a new module WS-X5234 ( RJ-45 10/100BTX for the catalyst 5505 .
I have not managed to make it work:
I have surfed cisco's website and that particular module needs supervisor
engine
i'm second to this opinion
i took class for ccna1 when 2beta was avail tried
passed it
the only major differen i can see - a lots off vlan
related questions
if you ready to ver1, study more vlans you'll be ok
with ver2 which hopefuly won't retire any soon
Date: Thu, 8 Jun 2000 16:02:01 +0100
Yeah!! Congrat..! We all know what is like, that is just a fraction of the
bigining.
--Original Message--
From: "Brandon Carroll" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: June 12, 2000 8:04:38 PM GMT
Subject: Passed CCNA!
After 4 weeks of ICRC, 1 week of ICND, and a no sleep for
Hello,
This may sound like a silly question bear with me for a moment...
Is it possible to get a 24 port L2 switch instead of 4 different hubs to
have 4 different networks?
The reason why I don't want to use a hub in the first place is because I
don't want any changes made to the frame as it
Henry,
Is anything besides the BCMSN course materials required to pass this test?
Thanks,
Brad Stanfield
[EMAIL PROTECTED]
Government Micro Resources
Network Operations Control Center
Bldg 33 NAVSEA NCOE
757-393-9526
Daniel,
Yes, you need what is called a MAU or Multistation Access Unit.
I have two on eBay that I am selling. They are both IBM 8228's and are in
perfect condition.
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItemitem=357452542
You will also need some cables to connect it all together.
I am facing a problem voice over IP regarding Voice
Channel Disturbance.The Voice is not working
good.However there is no load or sometime on 10K load
on 64 K .Once the router configuration was removed and
configuration was done again.Can anybody tell me if
there is no data why the voice is not
This is a most excellent book. Starts easy but gets very very in depth.
Atm Theory and Application
by David E. McDysan, Darren L. Spohn
ISBN: 0070453462
If anyone still buys from Amazon, try to go to Amazon from the links at
Groupstudy so Paul can get credit for it.
Larry
Gary Alterson
If you search the archives you will find plenty.
Here was minehttp://www.groupstudy.com/archives/cisco/22/msg00318.html
Hope that helps ya,
Larry
Russell Lusignan wrote:
Hey all,
For those of you who are pursuing the CCIE written/lab, can you give some
advice on some reading
I'm not in front of a router right now, so I may be wrong, but...I believe
you need to be in interface config:
3102(config-if)#int s0.1
"Omer Shommo" wrote in message [EMAIL PROTECTED]...
Hello,
I tried to create a subinterface on s0 but i could not. Can any body tell
me why?
Thanks
Omer
On Nov 2, 1:40am, "Howard C. Berkowitz" wrote:
}
} More complex: what problem are you trying to solve? Even in a hub,
} the bits that come in on one port are not the same physical bits that
} exit on another port. They will be regenerated, so it's arguable if
} the frame changes or it's
Good luck on the surgery. Hopefully, you'll be doing aerobics by next week
this time.
See you in a couple
Nigel.
- Original Message -
From: Howard C. Berkowitz [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, June 12, 2000 12:04 PM
Subject: Re: Making a switch behave like a hub
I like to use http://www.bestbookbuys.com/. They compare multiple book
sites for the best price.
Mike
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
steve billy
Sent: Friday, June 16, 2000 3:17 AM
To: [EMAIL PROTECTED]
Subject: Cisco Books (with
Everyone can ignore this one. This is a post I sent several days ago and
i've already discovered the cause of my confusion! :-)
John Neiberger
I seem to remember that Chuck tested this but I can't remember the
outcome.
The question was this: if you have two routers connected back to
www.elgrande.com
Hello everyone,
Can someone tell which are the best sites to buy Cisco
Books (with discount)?
Thanks.
Steve
__
Do You Yahoo!?
Send instant messages with Yahoo! Messenger.
http://im.yahoo.com/
derek lewinson wrote:
1) How can I simulate ISDN without using a real ISDN line (I don't have
one)?
There are some box that simulate a ISDN network. I saw this sometime
ago in www.blackbox.com.br (in portuguese). But I think that there is a
english version site.
2) How can I
There are several useful commands within the IOS that are undocumented. I'm
sure that many of these are for TAC to use in troubleshooting, but that's
what many of us do every day as well. Does anybody have a list of these
undocumented commands? I would like to compile a list that I will
Make sure you are using IOS 12.0(7)t
-Brad
"Hasan Abbas" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I am facing a problem voice over IP regarding Voice
Channel Disturbance.The Voice is not working
good.However there is no load or sometime on 10K load
on
If you only need Internet access for browsing use PAT, it's more efficient
in conserving your global IP addresses. You only need one global IP address
to use PAT and there should no noticeable latency in the translations for
150 PCs.
Vijay Ramcharan, MCSE, CCNA
-Original Message-
You must have the same revision of code on both routers or you might get
garbage for VOIP. The data will still flow, but for some reason unless the
routers are on the same revision then VOIP will not work right. I would
recommend 12.0.7 IP PLUS or later. Some of the earlier releases of VOIP
Folks,
Thanks for all that have replied. One thing to mention that Charles was the
only one to mention that " ip ospf cost and ip ospf priority are interface
specific commands " Nothing drastic changes at Cisco Charles. It was just Me
and I (brain was hurting ) putting the config together on
Thanks, everyone, for the all of the expressions of concern. I am
now on high-availability battery backup, with my pacemaker installed
and running Heart Standby Routing Protocol. Hospital from hell, but
the results seem good, and I will see the sane and computer-literate
cardiologist today.
Cisco,
Would like to join the email study group for the CCNA course.
Lew Mininson
BMC Solutions Inc.
Network Engineer
Professional Services
VM 1800-990-9944 X414
[EMAIL PROTECTED]
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ,
Wondering what's the passing score for CCIE written exam.
Will be taking it up shortly
Andrew
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and
Well, I am fat, dumpy, balding, married with 2 kids, and failed my CCIE lab
on the first attempt. What a "babe magnet" I must be... [=`)
From: "Howard C. Berkowitz" [EMAIL PROTECTED]
Reply-To: "Howard C. Berkowitz" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: Women in Cisco
Date: Sun,
The 2948G-L3 runs IOS and is really a 50 port router. The 2948(I believe)
runs the cat 5000 firmware. I'm not real sure exactly what you are trying
to do, but if you are wanting VLAN information you will need to do either
ISL or 802.1Q. To use the 2948G-L3 as a "switch" you will have to
New York, canal street!
steve billy wrote:
Hello everyone,
Can someone tell which are the best sites to buy Cisco
Books (with discount)?
Thanks.
Steve
__
Do You Yahoo!?
Send instant messages with Yahoo! Messenger.
http://im.yahoo.com/
Somebody posted a link to hacker site that had tons a while ago, so you may
want to check the archives. Sorry, I didn't keep the address :-(
Francisco
Rik Guyler [EMAIL PROTECTED] escribió en el mensaje de
noticias
[EMAIL PROTECTED]
There are several useful commands within the IOS that are
HI-
THOSE STILL
INTERESTED, A FEW OF US HAVE STILL BE MEETING FOR THE CCNP STUDY GROUP
ALL ARE WELCOMED, WE USALLY HAVE IT THAT WE MEET AS OFTEN AS POSSIBLE AFTER
WORK (>6PM ) AND ONE TIME A WEEKENED-
ALL THOSE INTERESTED
CCNA CCNP CCIE WELCOME TO COME OUT AND JOIN-
PS: I KNOW
A NUMBER OF PEOPLE
Hi, people!
A design question: What means pps?
Cisco 3660 have 100.000 pps of routing performance. What means this?
Could I think:
100,000 pps (x64) = 6,400,000Bps (packets to bytes)
640Bps (/100) = 6.4 MBps (bytes to Mbytes)
6.4 MBps (x8)= 51.2 Mbps (Mbytes to Mbits)
51.2Mbps (/2)
If I get ADSL Internet access with my local telco, the DSL can run on one of
my existing phone lines, and by using VPN I can create a connection between
a branch office and the head office.
If I choose to have route redundancy by using a DSL router that have the
ability to use a modem, and then
I did a post to one of the Cisco newsgroups recently about the CVPN3005
(formerly Altiga C5). Here you go:
== SNIP ==
Well, I have to hand to to Cisco. Good choice on the purchase of
Altiga.
I've done VPNs off of the PIX before, and can't say it was the easiest
thing I had ever done. My
Greetings,
I've a 7000 router in a remote location and it seems
the local admin hacking in by using the power outage
excuse. He changes the password by rebooting the
router and peeks around. I'm trying to catch him in
the act or log his activities, any ideas?
Thanks,
Nabil
Fate has put me in the position of sitting the ccda
exam in 9 days time without any preperation.
I've got the sybex book to play with, but if anyone
has
any tips or links it would be much appreciated.
Thanks
George
=
George Dodds
CCNA, MCP
No way! I have Palm IV with wireless access. It is excellent for testing and
router config. I can surf web sites, access my Exchange server, DNS lookups,
WHOIS queries, terminal access to Cisco gear. A lot better than draging
around a lap top.
--
John Hardman, MCSE+I, CCNA
ArrisTech/CCS-IS
I have been looking high and low for something that I can use as a
database/repository for all my WAN information. I'm looking at about 100
sites and need circuit info, frame relay dlci info, site contacts, router
maintenance contracts, PVC information, etc.
I have attempted a database in
The passing score is 70%. There are 100 questions and you have 2 hours.
Regards,
Aaron K. Dixon
WAN Element Manager - Cisco
Omnes, A Schlumberger Company
Work: 713.513.3253
Virtual-office: 281.675.0058
Helpdesk (24x7): 713.513.3180
-Original Message-
From: [EMAIL
Hello
I am using ios 9.21 and I enabled encrypted passwords. Now,
I can not use my password.
I used the cisco documented method to see my password via
the diag mode and the password is indeeed what I set it to.
However, when I enter the password, it doesn't work. What gives?
Someone on the
Thank you, guys.
You guys have been a real help. I will try to do the notepad thing and see
if the new entry is put at the last.
Regards,
Niraj
-Original Message-
From: Johnny Dedon [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 15, 2000 6:06 PM
To: Swart, Douwe; 'Palikhey, Niraj';
Here I go again, when configuring NAT, I want to configure a NAT pool, I
know the commands and I am running 11.3 but It does not recognize the "ip
nat pool" command...it's just not there.
Thanks,
Mark
___
UPDATED Posting Guidelines:
You could wait until it reboots again (if you're aware of exactly when it
occurs) and then telnet in yourself if see if he's using the console port.
If so, send him a message via telnet to get the heck off of there. Catching
him in the act would probably be a good deterrent. I believe the
As I finish my Solaris certification (and continue on with CCNP), I still
wonder if there is really a need for the two skill sets (at once).
I want to work in and with a Cisco world so I wonder if having and
maintaining the two certifications (as opposed to just maintaining and
growing one) is
On Fri, 16 Jun 2000 [EMAIL PROTECTED] wrote:
Greetings,
I've a 7000 router in a remote location and it seems
the local admin hacking in by using the power outage
excuse. He changes the password by rebooting the
router and peeks around. I'm trying to catch him in
the act or log his
Dear George,
Don't panic, just approach the task seriously. You've got a good reference in the
Sybex book. As a CCNA, the DCN is doable in 9 days. The CCDA test is among the most
failed in the certification track; I think it's because it's not taken seriously
enough.
The Sybex book will
I work in Telemedicine research for Dpt of the Army and we have a groupt that
is looking at many different uses for wireless technology and PDA computing
in the medical environment. We now even have a Wireless Medical working group
focused primarily on that. Reference material, drug calculators,
Could someone please tell me how many tests there are in the CCNA track? I
have been reading Cisco Press' Introduction to Cisco Router Configuration,
but, oddly, nowhere in this book can I find anything but the most general
informatin on obtaining this certification. Thanks in advance.
Maybe I have been over looking something on Cisoc.com, or maybe not :) I
recently acquired several 2524's to study with and start my lab. They all
have 11.0. what ever on them. I have been told that Cisco offers service
agreements whereby IOS's can be updated on the Router that the contract
You need to get the right IOS Feature Pack.
-Original Message-
From: Mark [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 16, 2000 11:38 AM
To: [EMAIL PROTECTED]
Subject: NAT POOL URGENT
Here I go again, when configuring NAT, I want to configure a NAT pool, I
know the commands and I am
I am new to this news group and there are a lot smarter people out there to
answer this question.
But I'll give it stab.
I know if you "Crossover" the Trans and Receive and make one unit a master
and the other a slave to network timing
you should be able to get a 56k DDS or any other 4-wire
I would also like to join the email study group for the CCNA course.
Makeeda
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Lewis Mininson
Sent: Friday, June 16, 2000 10:08 AM
To: [EMAIL PROTECTED]
Subject: Joining study group
Cisco,
I just purchase the Boson ACRC exam. I took the ACRC exam bit failed. The
Boson exam seems to be harder than the regular ACRC eaxm. Does anyone else
finds that to be true ?
Raheem
From: "J K" [EMAIL PROTECTED]
Reply-To: "J K" [EMAIL PROTECTED]
Check your feature set, it must be a plus one. If you do a sh ver, it must
inlude an "s", i.e. -is-, -js-,...
Mark wrote:
Here I go again, when configuring NAT, I want to configure a NAT pool, I
know the commands and I am running 11.3 but It does not recognize the "ip
nat pool"
1) UPS
2) Tacacs+
3) Fire him
-Brad
[EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Greetings,
I've a 7000 router in a remote location and it seems
the local admin hacking in by using the power outage
excuse. He changes the password by rebooting the
router
If you are using some snmp trap agent
like openview you can narrow the time that that the
box goes down. Then if you are motivated you can
assign that specific snmp trap to attempt to run
a set of diagnostics against the box to be able to
determine its exact state. That is, can you telnet?
Is there a way to do a similar thing with a PIX?
If you have two separate boxes. One doing SMTP mail and
the other doing WWW.
Can you make the pix differentiate by port number and send to
different inside devices?
Ken
""Nemo"" [EMAIL PROTECTED] wrote
in message [EMAIL
Please direct all Job related questions to the Jobs mailing list. There are
a number of recruiters that can help.
Paul
- Original Message -
From: Montgomery, Robert WARCOM Contractor [EMAIL PROTECTED]
To: Cisco [EMAIL PROTECTED]
Sent: Friday, June 16, 2000 1:10 PM
Subject: Need for two
A coworker of mine took the CCNA 2.0 a couple of days ago, and passed. He
was disappointed with the lack of technical content, and suprised by the
high emphasis on design issues, and low emphasis on the OSI model, ACLs and
VLSM.
Cheers,
Lance
From: "BB" [EMAIL PROTECTED]
Reply-To: "BB"
Anyone get a recent version of the Cisco Doc CD to run under Win2000 and use
IE instead of Netscape? I tried the Jan2000 version but it doesn't seem to
want to run under Netscape and IE. Anyone?
Russ..
___
UPDATED Posting Guidelines:
We have had this problem when running different IOS levels.
EF
-Original Message-
From: Hasan Abbas [mailto:[EMAIL PROTECTED]]
Sent: Saturday, June 10, 2000 10:06 AM
To: [EMAIL PROTECTED]
Subject: voip problem in link
I am facing a problem voice over IP regarding Voice
Channel
Rather than NAT is sounds more like PAT when one address is used for all
translations. There is no consistent port to port mapping used in PAT. It is
not my experience that an outside computer can reach a specific inside
machine. Generally you need additional ouside addresses to static map to the
Hello,
Is there a way to verify that a remote site has there isdn plugged in to
the wall. A sh controllers s 0 would verify that a cable is plugged in,
but I can't tell from a sh controllers bri 0, or I don't know what to look
for. I'd like to get away from having to contact the site to verify
The CLSC Exam Cran by Coriolis is good. You may want to check it out.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Rik Guyler
Sent: Friday, June 16, 2000 9:19 AM
To: Cisco Groupstudy (E-mail)
Cc: John Robert
Subject: RE: Switching 2.0
You
Groupmembers--
Please fix your autoreplies. Any time I post to the list, I get at
least 5 or 6 "I am out of the office..." emails that quite frankly,
I don't care to get.
It seems trivial for us "network gurus" to fix our silly little autoaways.
Thanks.
___
I also wonder that same thing seeing as the company that I work for would
like all of us to be triple threats of various flavors(Solaris, Cisco,
Microsoft etc.). Its a heck of a lot of work but I thinkt that the pay off
is there when you can leverage those varying skills to your advantage(with
Show isdn status
This will show you something like:
Austin-R2#sho isdn stat
The current ISDN Switchtype = basic-ni1
ISDN BRI0 interface
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 72, State = MULTIPLE_FRAME_ESTABLISHED
TEI = 81, State =
With the Cisco 700 series you can do this using pat porthandler,
unfortunately with all other boxes you have to setup the static nat, with a
pix its called a static pipe and then you open up a conduit to allow traffic
through it.
-Original Message-
From: ken L [mailto:[EMAIL
Could anyone clarify for me the difference between OSPF on NBMA Broadcast
and Point-to-Multipoint? The configuration looks the same to me. I'm using
the All-in-One CCIE Study Guide as reference, lab 37 or something. I know
that with P-to-M, that no DR is elected and whatnot, but could you give
The CD's search engine uses Verity's search engine. This is waht their FAQ
says:
No, the current release of CD Web Publisher will not work on Windows
2000. Windows 2000 has significant architecture changes from its
predecessors. As a result, your current CD Web Publisher
1 - 100 of 186 matches
Mail list logo
