appletalk on catalyst 5500 problem

Good evening everyone. Well, I'm here on my Sunday night trying to figure out a problem I'm having with some of the newer PowerMacintoshG4's and their interactions with a Catalyst 5500. For some reason the Macs always come up without their AppleTalk(EtherTalk) connection up as it was before a

IPX RIP Metrics

Can anybody explain how ticks and hops interact in defining IPX RIP metrics? Thanks in advanced for your assistance... - Dennis _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure

OT : HP Openview to monitor router and switch

I need to monitor Cisco router 7206 and Catalyst 5509 using HP Openview network management station. I have loaded the CISCO-GENERAL-TRAPS.my, however, the station cannot interpret the trap generated by the routers. What goes wrong ? _ FAQ, list archives, and

Passed BCMSN 640-504!

Passed today. I will admit I underestimated this test, thinking it would be a breeze. It was definetely tough with lots of curve balls thrown to make sure I knew my ISL, VLAN,vtp, commands, spanning tree, as well as some brain burning troubleshooting questions. I used Boson #2, Exam Cram

Cisco 675 ADSL

Hello, Which of these do I have to have configured for my DSL to work? I need to know what information (parameters) to ask my DSL provider for. This is a Cisco 675 ADSL router. SET INTERFACE WANx requires one of the following arguments baseSet the combined VPI/VCI base value baud

configure switching mode on cat 2900XL ?

Hi group, i checked the CCO but found nothing on this subject. Is there an IOS command to configure a 2924XL switch to use cut-through/store-and-forward/etc. switching? thanks in advance, Gabriel _ FAQ, list archives, and subscription info:

RE: Cisco 675 ADSL

Hello Andre, Ask your DSL provide which VPI/VCI they use and set the 675's VPI/VCI to that value. If the 675 can sync up then check the downstream and upstream bit rate upon modem sync up. Howard Choi CCNP+ATM, CCDP -- From: Andre Fecteau To: [EMAIL PROTECTED] Subject: Cisco 675 ADSL

Access Server as DHCP Server

Hi, This is my first time joining this "great" mailing list. And I have several problems which make me gonna crazy. Is there anybody know about how to make an Access Server (in Async. mode for Cisco 2509) as DHCP Server ? I mean it's could give the client : ip address, subnet mask, default

an AppleTalk question

hi, I have a question about the AppleTalk protocol suite that is how does the AppleTalk do to acquire the socket number of the destination and fill it in the "destination socket" field. And what is your reference on AppleTalk who wants to pass the CCIE examination. ok, thank you very much and

Access Server as DHCP Server

Hi All, Could anybody give me explanation ? 1. How to configure Access Server as DHCP Server, so the client can use it to obtain ip address, gateway, and subnet mask (using VLSM/Supernetting) 2. What's and how to use syntax async-bootp in IOS cisco global configuration ? Thank's for your

Re: OT : HP Openview to monitor router and switch

Probably the SMNP MIB version on both of them were not much. Try to check the version.. hope it helps. On Mon, 16 Oct 2000, Benny Leong (HTHK - Senior Engineer II - iServices Development, NNSD) wrote: I need to monitor Cisco router 7206 and Catalyst 5509 using HP Openview network management

Access Server as DHCP Server

Hi All, Could anybody give me explanation ? 1. How to configure Access Server as DHCP Server, so the client can use it to obtain ip address, gateway, and subnet mask (using VLSM/Supernetting) 2. What's and how to use syntax async-bootp in IOS cisco global configuration ? Thank's for your

RE: Access Server as DHCP Server

check if you can do this: Router(config)# ip dhcp pool net-172 and press Enter If it replies with the mode below then your router has the capability of DHCP server service: Router(config-dhcp)# then follow this url to config:

Re: cross-over roll-over and straight-through cables

On 15 Oct 2000 22:51:22 -0400, Lists Wizard [EMAIL PROTECTED] wrote: :What is general rule of thumb for cabling tow networking devices? In other :words: when should I use cross-over, roll-over or straight-through cables to :connect tow networking devices Ethernet: Cross = 1,2 - 3,6 If

puzzled by the timers in rip!!!!!

Hi, Before today I think I know the rip timers very clearly, but I am so puzzled now after I did some practice. The default timers for rip is 30 180 180 240. I think the flush timers just start at the same time as holddown timer. But in practice, I found that isn't true, I remove one network

Trojan Horse

Hi All, I got some problems again. Could Cisco Local Director be infected by Trojan Horse ? Cause I found this symptoms : Local director in every 3 minutes always broadcast message using unknown IP Addresses to internet (with many uncertain IP addresses very fastly), so make firewall

Time limiting debug command?

Can a debug command be issued to last for a specific duration? In otherwords, is there a way to say debug for 30 seconds, or so many events? Thanks... - Dennis _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report

cisco command

in BayAn Router, using "ip routes" with ip address of a certain site will sho if router has the entry in its table. How do you check this on a cisco router. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct

RE: Cisco command

show ip route you can add a specific by doing show ip router 192.168.240.1 -Original Message- From: Israr Akram [mailto:[EMAIL PROTECTED]] Sent: 16 October 2000 11:42 To: [EMAIL PROTECTED] Subject: cisco command in BayAn Router, using "ip routes" with ip address of a certain site

2 serial lines and bandwidth (aggregation or no)

Hi all I want to setup my router (let say a CISCO 26xx) to use its two serial lines like this: -usually the traffic goes trough the first serial line -when the first line is flooded the necessary (additional) bandwidth should be from the second serial line Please advice me: What should I

RE: 2 serial lines and bandwidth (aggregation or no)

make s1 the backup for s0. you can then say backup load 128 or 50% and it will kick in then. Look up the commands for backup interface and backup load. Come back if you need more help but you should be able to suss it out yourself from the above commands -Original Message- From:

RE: CCDP PASSED!!

I THINK that you just can't take the SAME exam in the same day. But different exams are allowed Carl. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jay Hennigan Sent: Sunday, October 15, 2000 3:02 PM To: [EMAIL PROTECTED] Subject: Re: CCDP PASSED!!

3Com superstack with ATM modules

Slightly off-topic.. Just wondering if any one has had any experience with this switch and ATM modules. Is it comparable and/or close to the LightStream series. I know its a lot cheaper, But I believe it is also no ,longer supported. _ FAQ, list archives, and

Re: CCIE labs and theory test examples

I don't think that anyone should be thrown off the list for how they feel. If you read what is stated it makes sense, I would add, that if you can't find something on the net you probaly ain't CCIE material. But here is a hint on that free site, it is a little out of the way site called

CCNP Security Speciaization Update

Hi all; My company asked me to do security specialization for CCNP. Then I went to cisco to check what was about the exam 640-442. Then I checked the requiremnet was updated. The specialization level require four exam now. I would like to have any information or advice about

Re: Has anyone used Boson's CCIE Written Exam Prep?

I would not recommend the BFQ a total rip off in my mind. I have used Boson in the past for other exams and found them excellent. They usually reference a cisco press book or the cisco link for there questions. An excelent feature. Have not used the CCIE software but if their past track record is

RE: cross-over roll-over : Here is THE simplest rule

Your analogy is incorrect, you do no use a cross over cable between a switch and a router, you must use a straight through cable. Switch to Switch or Hub to Hub, or client to router do require a crossover, client to switch, client to hub and router to switch/hub do not. Louie Since

CCIE written

HI, I wana know if any1 knows good study material for ccie r/s written. And offcource some online material which help me focus in the rite direction would be of great help :) Thanx Bilal Arif Dar MCSE, CCNA, CCNP

Two Leaed Line from Diff. ISP.

Hi, I have two leaded line from two different ISP's, now I want that I use in them in such a, way if one goes down then automatical second one handel the request and in both are working then load balancing wil happen. TIA Gm

No Subject

__ Do You Yahoo!? Yahoo! Messenger - Talk while you surf! It's FREE. http://im.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and

dialer interface as a backup link

Deal all I was wondering why some people use dialer interface as a backup interface. I think If there were serial interface as well as bri interface, serial can be used as primary and bri can be used as backup interface. Is there any advantage of using dialer interface as backup interface?

IP Unnumbered.

Hi, Can somebody tell me Advantages disadvantages of IP unnumbered system. TIA Gm.

IP Unnumbered.

Hi, Can somebody tell me Advantages disadvantages of IP unnumbered system. TIA Gm.

Strange Problem.

Hi, Today I got my second leased line and after that I find very strange thing in traceroute command. My IP rages are 45.x.x.x from one ISP 162.x.x.x from second ISP My gateway which is doing NATting in ip range of 45.x.x.x both of my lines are using Static routes. Protocols are PPP HDLC

Re: OT: how to create 2 IE connections--Solution

No, you can't create 2 separate profiles for IE. There is a workaround: Set ie up for Home use Open regedit and Export the IE section to a .REG file. Name it Home.Reg Set ie up for Office Use. Open regedit and Export the IE section to a .REG file. Name it Office.Reg Under 98, the I.e.

Re: WFQ FR

As I recall, weighted-fair queuing was so buggy when 11.3 shipped that the developers made "no fair-queue" the default configuration. If you update to a newer IOS, then you could use it. It might help with your congestion problems. It's recommended for links less than E1 speed. Priscilla At

Re: an AppleTalk question

AppleTalk uses NBP to register an NBP object name and object type within a zone for translation from name to address. DDP takes care of assigning socket numbers, as well as node and network numbers, to provide a unique identification for every process running on a AppleTalk network. At least that

Re: WHIZZ KIDS WHO HAVE THE CCIE number

Except that when you are that young and also that intelligent, doing things like going to chucky cheese makes you want to go postal... A recent experience I had with a similarly gifted child drove the point home. At a birthday party at the earlier mentioned Chucky Cheese's, I saw this

EIA/TIA 568B Color code

Hi In EIA/TIA 568B the pins to color code arrangements are as follows: Pin Code 1Orange/White 2Orange 3Green/White 4Blue 5Blue/White 6Green 7Brown/White 8Brown Is it true that this arrangement is made according to each wire

Owner of alias

Hi All, Can someone please provide owner information for this alias? Thanks! Christine Christine Jeffrey Cisco Systems - CCIE Lab TARA Building 5562 Sackville Street Halifax, Nova Scotia Canada B3J 1L1 Telephone: (902) 492-8811 Facsimile: (902) 492-3926 Email: [EMAIL PROTECTED] Check

Re: IPX RIP Metrics

It is my understanding that IXP RIP will route based on tics. If there are two routes with equal tics, then it looks at the number of Hops. tics is a time measure: ~1/18 sec and the max hop count is 15. This is all on page 337 of the ICND book. Good Luck, Brandon --- Dennis Laganiere [EMAIL

Link status up-down on 3524 switches ?

Currently this message is flooding our network management console. Does anyone know how to disable it ? is "no logging event subif-link-status" the candidate for each port on the switch ? Regards, Phil. Do You Yahoo!? Get your free

How do I assign an IP address to a switch cluster?

I want to cluster three 3548XL switches together using GBICs. I set up the first switch to be the command switch using 192.168.1.1 as the IP address. When setting up the other two switches do I assign them IP addresses (ex: 192.168.1.2 and 192.168.1.3) as well or not? Looking at the

RE: Two Leaed Line from Diff. ISP.

What type of links are they? What type of business are you running? You could fit the bill for BGP, but it depends on some other factors. -Original Message-From: net974 at Yahoo [mailto:[EMAIL PROTECTED]]Sent: Monday, October 16, 2000 10:17 AMTo: [EMAIL PROTECTED]Subject:

Re: Two Leaed Line from Diff. ISP.

i thought doing BGP needs to have own IP addresses? 2 ISPs wil have 2 different set of IP and i dun think those ISP will want to route the traffic for the other ISP "Richie, Nathan" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... What type of links

RE: dialer interface as a backup link

Title: RE: dialer interface as a backup link You can use the dialer interface to configure mulitple backup interfaces with one configuration vice having to configure each backup interface. If you only have one serial and one bri, I find it a bit less confusing to not use the dialer interface,

CCIE Written - Design

Has anybody had any experience or heard about the CCIE Written - Design yet? Thanks, Patrick _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own

AS5800 / PRI Issue

Wierd little issue I ran into while turning up a set of PRI's. While doing "sh isdn stat", numerous d-channels were showing up having both TEI_ASSIGNED and MULTIPLE_FRAMES_ESTABLISHED attributes. I mean that there were, literally, two lines saying two different states for a single d-channel.

Re: ***** HELP: NAT Question ***********

Something to add When i tired to do away the "IP NAT INSIDE" on FA1/0, all the traffic from FE1/0 can't get out to anwhere outside Serial 1/0...ping traceroute all failed "GNOME" [EMAIL PROTECTED] wrote in message 8sch47$d9d$[EMAIL PROTECTED]">news:8sch47$d9d$[EMAIL PROTECTED]... Hi Pls

Re: Has anyone used Boson's CCIE Written Exam Prep?

Ton of errors objectives not clearly covered an example the bcmsn objective clearly states that there is no atm but the test goes on and on with ATM lane questions. Also there must have been 20 questions on switch architecture saintsage and all that, not even on the test. HSRP and multicasting,

RE: IP Unnumbered.

I'm no expert, but I have played with it. We have a lab with an old 3000 token ring router, back-to-back with a 2500 ethernet router. The 3000 is running IOS 9.x and the 2500 is running 11.2. The 3000 is on a subnet with another router which is our link into the Campus Area Network. With

Owner of cisco@groupstudy.com

I've received a response to my earlier question. Thanks to all! Christine :-) Christine Jeffrey Cisco Systems - CCIE Lab TARA Building 5562 Sackville Street Halifax, Nova Scotia Canada B3J 1L1 Telephone: (902) 492-8811 Facsimile: (902) 492-3926 Email: [EMAIL PROTECTED] Check out our

RE: cross-over roll-over : Here is THE simplest rule

When you want to connect DTE to DCE equipment you need a straight cable, if you want to connect DTE with DTE or DCE with DCE equipment you need a cross over cable. This sound good, but I am not sure is 100% accurate. Sebastien. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL

RE: AS5800 / PRI Issue

Title: RE: AS5800 / PRI Issue I would check the switch type with the provider, as this has happened to me before. I would try different switch types as well, because I have noticed most technicians only know the closest swtich type, which may not be the switch you are attached to.

RE: Two Leaed Line from Diff. ISP.

In order to run BGP, you must have 2 seperate ISP's (hence 2 ranges of IP addresses) or a unique routing structure that would be fixed by BGP. You would advertise your IP addresses to both providers and create redundant paths to your network from anywhere on the internet. You would filter

Re: Two Leaed Line from Diff. ISP.

i thought doing BGP needs to have own IP addresses? Not necessarily. It's perfectly legal, in a multihomed environment, to have no provider-independent IP addresses. Instead, you use a block from each of your upstream providers. You will generally need an assigned AS number. 2 ISPs wil

CCIE 350-001: prep kit question.

CCIE 350-001: prep kit page 332 "netBIOS is not routable, but NetBEUI is" Is this right? I thought that NetBEUI was unroutable?

UPS for 4006

Can anyone recommend a good UPS to use in my access closets for a Cat 4006 (Layer2) with Switched 48-10/100 Mbps (RJ-45) modules installed? 3 of my 7 closets will have TWO 4006's. Cheers, Jeff _ FAQ, list archives, and subscription info:

RE: EIA/TIA 568B Color code

It is immune to wire reversal if you reverse the wires of the same color at both ends. Pairs are color coded, and need to stay paired. Some pairs are twisted tighter than others, so you can interchange pairs and usually have a working cable. Many devices, NIC's, hubs, etc. can automatically

RE: cross-over roll-over : Here is THE simplest rule

A good conclusion on this topic. I think Bernard just sums it up. I've seen some other digression and wrong assumptions. This shouldn't be. No mention was made of the use of the roll-over cable however. Bernard [EMAIL PROTECTED] on 10/16/2000 02:26:07 PM Please respond to Bernard [EMAIL

CCIE info at networkstudyguides.com

Can anyone comment on the material available for CCIE at www.networkstudyguides.com. I am interested in knowing if the material is on par with the written exam, and good to have, and if the whole package is worth the $100 (labs and all). Brian ---

RE: AS5800 / PRI Issue

Title: RE: AS5800 / PRI Issue Thanks for the reply. Yes, this is a great idea. However, we have tried this. While speaking to the telco, we verified everyone using primary-dms100. -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Richie,

RE: Fiber optics

What in particular are you looking for? You could look at the vendor sites (Corning, JD Uniphase, Corvis, Sycamore, etc.) There are several books out there now on optical networking. One of my favorite e-newsletters on optical networking is www.lightreading.com. There is also the Optical

RE: cross-over roll-over : Here is THE simplest rule

The rule is: connecting devices of the same OSI layer, use cross-over cable. connecting devices of different layers, use straight through. A workstation is considered layer3. Bernard Excellent rule! I hadn't thought of it but it's very useful. Your analogy is incorrect, you do no use a

Fw: NAT, Seconday /or VLAN??

-Original Message-From: Robert Cabeca [EMAIL PROTECTED]To: [EMAIL PROTECTED] [EMAIL PROTECTED]Date: Monday, October 16, 2000 13:40Subject: NAT, Seconday /or VLAN?? All, I have been confused about the best way to go about this. I don't think there is an easy way. Any input would be

pins for - token ring respectively serial cable

Hi! i got a cisco 2504 with a token ring port on it. this is a db9-connector. i would like to connect two 2504 back-to-back. can anyone tell me which pins i have to use on the db9-connector.(both ends-please ) .. and another question. a simple serial cable ( for connecting pc and modem - DB9

Re: how to go for MCNS

You must first have your CCNP. The MCNS is a specialization for the CCNP. Dinesh_Kakkar wrote: Dear friends Can any body tell me about MCNS certification. How I can go for--what are the exams I have to take. Present I am CCNA working on network security. -Dinesh

NAT, Seconday /or VLAN??

All, I have been confused about the best way to go about this. I don't think there is an easy way. Any input would be appreciated. I have been blessed with the task of developing a new IP scheme w/Vlans phasing out the old ones. The current IP scheme is a class B (159.159.0.0 255.255.0.0)

New Security Specialization Exam References

Does anyone know where to find specifics about the associated new courses and/or source documents that would be adequate to prepare for these 3 new tests? Thanks below clipped from http://www.cisco.com/warp/public/10/wwtraining/whats_new/ CCNP Security Specialization exam requirements will

No Subject

Hi! i got a cisco 2504 with a token ring port on it. this is a db9-connector. i would like to connect two 2504 back-to-back. can anyone tell me which pins i have to use on the db9-connector.(both ends-please ) .. and another question. a simple serial cable ( for connecting pc and modem - DB9

Re: CCIE written

http://www.cisco.com/warp/public/625/ccie/certifications/routing.html - Original Message - From: Bilal Arif Dar To: [EMAIL PROTECTED] Sent: Monday, October 16, 2000 7:13 AM Subject: CCIE written HI, I wana know if any1 knows good study material for ccie

Hypothetical BGP question

Take a look at the sketch here: http://www.allnetllc.net/plans/bgp.gif Disregard the screwy triangle connections to the Ethernets... each device has only a single connection to the Ethernet networks. Something weird happens when I save a Visio drawing as a GIF... Routers 1A and 1B are

line protocol down

I have this problem with my 2503. The line protocol goes down consistently. If I reset the modem (CSU/DSU) or reload the router, the line protocol comes up. And then it goes down after few minutes/hours and history repeats. I couldn't nail down the problem. Any clues? Thanks, Rayappa.

Re: WFQ FR

Fanglo MA wrote: Dear ALL, I have some congestion found with my Internet with is connected to the provider via FR. From the setting configurated by ISP, the no fair-queue is set on the FR link to ISP. I would like to ask if this is any negative impact on FR with fair queue so that make

Re: CCIE 350-001: prep kit question.

That is incorrect. NetBEUI is NOT routable. This guys gives a pretty good summary of NetBEUI: http://hdallen.home.mindspring.com/netb.htm [EMAIL PROTECTED] wrote: CCIE 350-001: prep kit page 332 "netBIOS is not routable, but NetBEUI is" Is this right? I thought that NetBEUI was

Re: Hypothetical BGP question

to get decent gifs you have to "ungroup" all the icons on the page. i.e., a single icon may be made up of several simple icons. if you ungroup these (all of them)the gif will turn out much better. I think you can select them all and then un group them. Visio will complain that the smart

Re: CCIE Written - Design

I am planning on taking the CCIE Design written at the end of this month. I am about to take the CID exam in a couple weeks and I will take the CCIE Design written a week after that. I dont know if I will be adequately prepared but I will find out. I have been trying to find some helpful

Circuit Test's help

Team, Does any one knows any guide or document which will explain the set of commands that can be use in a router in order to troubleshoot a circuit or to test it. Thanks,

RE: Hypothetical BGP question

Title: RE: Hypothetical BGP question Couple of questions. 1) What is the purpose of the like between routers C D? Management? 2) Are the upstream providers the same for both routers 1 2? Thanks, Nathan -Original Message- From: Dale Holmes [mailto:[EMAIL PROTECTED]] Sent:

CCNP v2.0 prep -- Exam Cram series

I just recently passed the CCNP v2.0 exams. I am keeping the Cisco Press books, but am selling my Coriolis Exam Cram books covering the four exams for CCNP v2.0. These books are unused and in perfect shape. "The Cram Sheet" is intact at the front of the book.

Re: IP Unnumbered.

Ip unnumbered preserves IP addresses. It allows a port to "borrow" an IP address from another Port on the same device. (usually the Loopback, can be any, but Loopback stays "up") It's great for point to point connections. ISDN , Frame Relay etc.. Jon

Re: Hypothetical BGP question

On Mon, 16 Oct 2000, Dale Holmes wrote: Here is the Question: How many AS's are required to build this scenario (and have it work)? Remember that all these routers and both these address blocks are under a single administrative control... You can use 1 AS Thanks! Dale [=`)

Re: appletalk on catalyst 5500 problem

Well, turning on portfast would have been my method of troubleshooting also. The other thought that comes to mind is that maybe the EtherTalk devices can't hear from their router quickly enough because the switch ports don't enter forwarding mode soon enough. An EtherTalk device sends a

RE: WHIZZ KIDS WHO HAVE THE CCIE number

Yes, this guy who works for Cisco in Virginia - check CCIE Central Vol I Issue 4 at http://www.cisco.com/warp/public/625/ccie/ccie_program/ccie_central.html. He must by now have done 4th, 5th, ... too. Rayappa. -Original Message- From: Mohammed Hakim [mailto:[EMAIL PROTECTED]]

Re: dialer interface as a backup link

Yes. If you dedicate your BRI to backup it can't be used for anything else. Using a dialer interface allows you to specify the dialer as the backup to the serial and frees the BRI physically for other things like load thresholds, dialing in, dialing out, and DDR. - Original Message -

Re: ***** HELP: NAT Question ***********

On 15 Oct 2000 11:05:44 -0400, GNOME [EMAIL PROTECTED] wrote: :Hi : :Pls see the following sample config : :int serial1/0 : ip address 200.10.10.1 255.255.255.252 : ip nat outside : :int fastethernet 0/0 : ip address 172.16.0.1 255.255.255.0 : ip nat inside : :int fastethernet 1/0 : ip

Re: an AppleTalk question

At 04:54 PM 10/16/00, sniffer wrote: hi, I have a question about the AppleTalk protocol suite that is how does the AppleTalk do to acquire the socket number of the destination and fill it in the "destination socket" field. Socket numbers 1-127 are statically assigned. For example, RTMP uses 1,

Re: ***** HELP: NAT Question ***********

OK, let's try it again, with content this time: On 15 Oct 2000 11:05:44 -0400, GNOME [EMAIL PROTECTED] wrote: :Pls see the following sample config : :int serial1/0 : ip address 200.10.10.1 255.255.255.252 : ip nat outside : :int fastethernet 0/0 : ip address 172.16.0.1 255.255.255.0 : ip

MCNS

Hello all! I am looking for resources for the "Managing Cisco Network Security" exam #640-442. If anyone has the manual for this exam, I would love to hear from you! Thanks in advance. CV _ Get Your Private, Free E-mail

RE: Circuit Test's help

What kind of line? http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/tr1915.htm http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/tr1918.htm -Original Message-From: Juan Blanco [mailto:[EMAIL PROTECTED]]Sent: Monday, October 16, 2000 2:14 PMTo: [EMAIL

RE: Circuit Test's help

What kind of circuit? (ISDN, Frame Relay...) Adam Hickey [EMAIL PROTECTED] -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Juan BlancoSent: Monday, October 16, 2000 12:14 PMTo: [EMAIL PROTECTED]Subject: Circuit Test's help Team,

RE: appletalk on catalyst 5500 problem

I have seen this once in the past. It was caused by multiple seed routers (one Unix box and one Mac) on the same segment. IP connectivity was fine, but AppleTalk would come and go. Chris Lemagie Systems Engineer Cisco Systems Seattle Commercial Region (425) 468-0959 [EMAIL PROTECTED]

Re: IP Unnumbered.

Advantages: Saves on IP address space if you don't have networks to spare. Disadvantages: Harder to troubleshoot problems since you can't ping the unnumbered interface to see if it's down, etc. --- Gunjan Mathur at 9netave [EMAIL PROTECTED] wrote: Hi, Can somebody tell me Advantages

Re: Circuit Test's help

On 16 Oct 2000 15:17:47 -0400, Juan Blanco [EMAIL PROTECTED] wrote: : Does any one knows any guide or document which will explain the set of :commands that can be use in a router in order to troubleshoot a circuit or :to test it. What type of circuit? What type of trouble? "show interface"

RE: appletalk on catalyst 5500 problem

http://til.info.apple.com/techinfo.nsf/artnum/n30922 May be the article to which Priscilla was referring. -Original Message- From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]] Sent: Monday, October 16, 2000 2:35 PM To: Dave Redwood; [EMAIL PROTECTED] Subject: Re: appletalk on

book recommendations...

Can anyone recommend a good book for traffic shaping including things like QOS, COS, TOS, IP precedence, prioritization, etc.. I'm getting into Voice over stuff and it seems like u need to know these things really well to tweak the voice over network to make it sound perfect etc.. Thanks Cory

RE: book recommendations...

see: http://www.itprc.com/qos.htm for my list of recommended books on these topics. Also, have a look at Dr. Pete Welcher's article on Cisco IOS 12.x QoS features at http://www.mentortech.com/learn/welcher/papers/newqos121.html irwin -Original Message- From: Stull, Cory

Re: Circuit Test's help

Cisco Internetwork Troubleshooting. Available (free) in the Technical Document section of Cisco.com, or available in Hardcopy from Cisco press. If you work with cisco stuff more than once a week, you should have a copy. Original Message Follows From: Juan Blanco [EMAIL PROTECTED]

Re: CCIE WHIZ kids

does there any irc server/channel to talk about Cisco matters...whether certificaion,books, problems etc would appreciate if you could let me know the irc server and channel name. #cisco on efnet Ha. I hope you're kidding. You'll get kicked darned quick if you come in talking

RE: IP Unnumbered.

I'm going to say 2 AS's because no internet traffic can pass between the two groups, only private traffic. Therefore, the Internet will see these as discrete systems, and not a single AS. That is unless you are going to let internal internet traffic cross C D, but from your diagram I

  1   2   >