Geeze!! Why not? I guess they already had this on mind when deciding to
cut their own 15900 Lambda router. Now it makes more sense.
Kent
Circusnuts wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Geeze !!! Why !!!
Phil
- Original Message -
From: Natasha
To:
Sent:
Actually, deleted aren't reported down by signalling, if you mean that the
FR switch sends LMI info about them. Deleted means that they aren't being
reported by LMI at all, but the router knows about them.
If the PVC is down but the FR switch knows about it, it will be reported as
inactive. It
Hi.. What I need is whatever service that I connected to 50.100.167.102 it
will connect me to 192.168.3.31 If this cannot be done, can you show me one
service by one service.
-Original Message-
From: Brian [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 04, 2001 2:23 PM
To: [EMAIL
Hi,
I guess you can config a static nat mapping
and reverse the inside and outside interface.
that is ,
ip nat inside source static 192.168.3.31 50.100.167.102
interface e0
ip nat outside
interface e1
ip nat inside
-Michael
Sim, CT (Chee Tong) wrote in message
...
Hi..dear all,
We
Yes,my English is very poor,
And my mean is how to get the bible or dumps of Exam 640-504
Can you tell me? Thanks!
[EMAIL PROTECTED] (McCallum, Robert) wrote in
[EMAIL PROTECTED]:">news:[EMAIL PROTECTED]:
Unless my English has totally left me I reckon you might need to
elaborate slightly
hi all,
Does anyone know where on the Cisco site the hardware compatibility
matrix is, what I want to be able to do is put in my router/switch model to
try and find all the different modules available aswell as being able to see
(for example what modules are compatible with 2600 and 3600
On Sun, 3 Jun 2001, Lists Wizard wrote:
Hello,
Is it good to both compress and encrypt data going out of an interface?
Thanks
Law
Yes, in theory. Compression, if performed *before* encrypting, removes
redundancy, thus making cryptanalysis much harder. It used to be,
though, that cisco
My config:
interface Ethernet1
backup delay 0 3
backup interface BRI0
router eigrp 10
network 172.26.0.0
ip route 172.20.20.0 255.255.255.0 10.10.9.5 200
That's too skimpy for a reliable diagnostic. Can you post your whole
configuration to the list? (Sanitize as necessary.)
A few
Doug Lockwood wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Just a thought. Are you really running rip V1 or are you running Rip V2
in
compatibly mode.
The first config would look like:
Router Rip
Net 172.10.0.0
The second would look like:
Router rip
version 1
net
I remember I took the foudation exam where they regroup the BCMSN , BSCN and
the BCRAN
exams and I remember questions on cisco 700 in the bcran section.
take some tets from examcarm.com before it is helpfull and free , be
carefull they ask
questions on commands of cisco 700 , I temmeber
the Cisco commercial configurator is very helpfull , and updated on the
cisco web try
ordering information and assistance and tan configuration tool .
another section on the cisco web is the modularity cafe .
Hope this help
Dwayne Saunders a icrit :
hi all,
Does anyone know where on
Dear friends,
We have Pix520 firewall and cisco secure2.5 on Windows NT 4.0 and using
windows NT users database, the problem when cisco secure authenticate user
who are using internet browsing it prompts user ID and Password several
times and then says page can not be displayed once you refresh
Dear fellows,
How we could secure MS exchange over PIX firewall, we do not want any
unknown user to access Exchange Server5.5 for relaying, is there any way
that we can protect that thru PIX firewall or thru the external Router???
Immidiate respond will appericiated.
Regards.
Message
Hi,
If there is a machine within my network generating high load of traffic, how
can I detect the machine asap?
I have cisco 7507 routers and catalyst 5509 switches. Which command should I
use to check? On the catalyst switch which command can I use to find out
port the machine is plugged to?
If yes, can you show me how is the command look like?
Hi,
I guess you can config a static nat mapping
and reverse the inside and outside interface.
Mike,
Try this instead,
ip nat inside source static tcp 192.168.0.100 25 25 extendable
This statement will allow mail to your rfc1918 addressed
Hi Andy
Try this command on catalyst 5509
show top It gives the top stations report.
-Original Message-
From: Andy Low [SMTP:[EMAIL PROTECTED]]
Sent: Mon, June 04, 2001 3:03 PM
To: [EMAIL PROTECTED]
Subject: Dos Attack [7:7049]
Hi,
If there is a machine within my
hiya folks :) happy monday
I'm thinking of backup solutions for a network I'm consulting for.
This network consists of 7 Vlans of which 5 are used for production. The
core switch is a Cat 6509 with gig uplinks to 9 closets with about 1500
nodes total. Incase the Cat catches on fire I would like
Can anyone please advise me of what is wrong with my
Switch? It keeps rebooting and rebooting into this
loop. Thanks in advance, the output from the 2900XL
is below.
Cisco Internetwork Operating System Software
IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version
12.0(5.1)XW, MAINTENANCE IN
with regards to the contents of the exam, I am reminded of the time I told
my son that when I was his age I could name all the presidents of the
IUnited States, to which he answered there were only 5 or six of them back
then :-
with regards to the value of the CCIE, whatever that may be, like it
Hi,
Great. Nowadays you have IPSec, MPLS, Voice, Optical and you still need
CLNS/CLNP
for IS-IS. You can also argue whether Appletalk or IPX should be removed
or not.
These are important protocols that should be placed in an add-on
certification
for Desktop or Client/server issues. Me thinks
Is your ISDN interface on the same network as 10.10.9.5?
Maybe try ip route 172.20.20.0 255.255.255.0 BRI0 200 instead. THis
will force the BRI interface up if the route is used.
Can you do an isdn call command to bring up the isdn manually?
Try debug ppp auth and various debug isdn commands,
Agreed. avoid Library of Computer and Information Sciences..
they lost one of my orders. never billed me twice, but sent selections
of the month that I clearly declined. I've e-mailed them asking how to end
my membership (because their website says nothing about it that I can
Hi all,
I have a big problem on Catalyst 5505. After I upgrade the Supervisor module
form CatOS 4.2 to 5.5.7, the port 1/1 on the supervisor is disabled.
I try to replace another Supervisor module and upgarde it's CatOS to 5.5.7
too. the problem occurs again.
Does any cisco doc. mention this
Natasha,
Marconi are making no comment citing that the top execs are in
Atlanta at a trade show
My own personal thought would be that the Marconi execs would have issued a
statement if their was
NO truth in the matter, since Marconi shares are up 6% today on this rumour.
Q: What
Ok, I changed the HUP with a 10/100 MB switch. That fixed the problem.
Why? I have no idea. It is quite puzzling how a hub would affect the
connection one hop away.
I am wondering if it is a combination of the hub/ethernet card/ and software
problem (as described in another response). This
I can recall the same sort of problems with Ericsson Congo Routers and
anything they had to autonegotiate with.a software flash cured the
problem. An inscrutable glitch.
Karl
- Original Message -
From: Paul Borghese
To:
Sent: Monday, June 04, 2001 2:17 PM
Subject: Re: Problem
They have a pretty poor history as a defence contractor though. They
managed to squander millions/billions on a British Version of AWACS which
bellyflopped. We ended up buying American again. They could not get the
Radar to work properly. Apparently had stationary brick walls moving at 100
that was awesome
Thank You,
Don Johnson
- Original Message -
From: MIRSKY Carl
To:
Sent: Friday, June 01, 2001 1:12 PM
Subject: RE: another OT: why you UNIX guys look down on we NT guys? [7:6820]
Soapbox on:
I think this says it all and that's all's I know. (Courtesy of your
what is the question
- Original Message -
From: Mike Peterson
To:
Sent: Friday, June 01, 2001 3:50 PM
Subject: It group study worth it or not!!!??? [7:6837]
Hi All, A while back I posted some questions but I haven't got any
answers back from no one whomake me think that ether
At 09:33 AM 6/4/01 -0400, Stephen Skinner wrote:
once apon a time there was a man who was given a spec to build a network
with full redundency...the spec he put togother cost WAY to much and
need severly cutting down...he told them not to do it but they ordered
him to .so he did
I wish I had thought of it... :-) Anyway, can we PLEASE end this now? We
ALL have our own opinions, and as is was stated several times, there is no
one OS that can do it all Just like anything else. I think what we should
be more concerned with is how we can all unite and keep this
Actually it's for here or to go, Sir ;-)
MIRSKY Carl wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I wish I had thought of it... :-) Anyway, can we PLEASE end this now? We
ALL have our own opinions, and as is was stated several times, there is no
one OS that can do it
Q. What is your favorite color?
A. Blue... NO RED. AG!
(Courtesy of Monty Python and the Holy Grail)
-Original Message-
From: Donald B Johnson jr [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 04, 2001 8:51 AM
To: [EMAIL PROTECTED]
Subject: Re: It group study worth it or
You want Fries with that?
-Original Message-
From: Me [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 04, 2001 9:03 AM
To: [EMAIL PROTECTED]
Subject: Re: RE:UNIX NT BEATING A DEAD OS [7:7063]
Actually it's for here or to go, Sir ;-)
MIRSKY Carl wrote in message
[EMAIL
Yes, you can (IF you can find them!!)
-Original Message-
From: cisco guru [mailto:[EMAIL PROTECTED]]
Sent: Sunday, June 03, 2001 1:19 AM
To: [EMAIL PROTECTED]
Subject: Re: Book club [7:6811]
Is this the same book club that sent me 3 books today? I don't even know how
they got my name
Reminds me of a gag suggestion from George Carlin:
You drive to a Jack-In-the-Box drive-thru. You place your order, drive up
to the window. The guy hands you your bag and says $2.52. You pay him,
leave, and drive to the nearest Jack-In-The-Box. You drive up to the
speaker, and give the *same
There's a way to prevent relaying on Exchange 5.5 and it's posted on MS
Technet. The link is
http://www.microsoft.com/TechNet/exchange/relay.asp and it has nothing
to do with the Pix. If you're allowing traffic from the Internet to
your Exchg server, then you should only permit access to the
Thanks for the reply,
You are correct on your first point. The post in the archive, by Howard, I
realize it does NOT make mention of dial backup. I think this is my error,
I need to delete the backup interface command. I think the dial backup is
meant for a serial interface (frame relay,
Here is one place I would look for detailed info on the different mods.
http://www.cisco.com/warp/public/779/servpro/modulecafe/
The other on is the configuration tool. If you worked at a VAR you would
use this ten times a day.
http://www.cisco.com/pcgi-bin/front.x/newConfig/config_root.pl
In the UK if you are sent goods unsolicited then if the company does not
pick em up when you tell em you get to keep em. Then you could sell em.
Nothing like a profit.
Karl
- Original Message -
From: Georgescu, Aurelian
To:
Sent: Monday, June 04, 2001 3:17 PM
Subject: RE: Book club
large or extra large
- Original Message -
From: MIRSKY Carl
To:
Sent: Monday, June 04, 2001 3:14 PM
Subject: RE: RE:UNIX NT BEATING A DEAD OS [7:7063]
You want Fries with that?
-Original Message-
From: Me [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 04, 2001 9:03 AM
Greetings All,
Is there a beast out there that can take advantage of 2.7 Km multimode
connection? We're currently using DEC bridges and getting 10/half
connection. I need to replace the DEC bridges with something new but, I
can't seem to put my hand on a device with this long haul connection
Run Away...Run Away..
- Original Message -
From: MIRSKY Carl
To:
Sent: Monday, June 04, 2001 3:04 PM
Subject: RE: It group study worth it or not!!!??? [7:6837]
Q. What is your favorite color?
A. Blue... NO RED. AG!
(Courtesy of Monty Python and the Holy Grail)
I don't know that I would call it a bible, but try Caslow's Cisco
Certification: Bridges, Routers and Swithes, or any of the Cisco Press
books. Also belive it or not but CCO is a great resource as well, and
get this, it's free!
As far as a dump goes, this is a family oriented discussion list,
Would you like to make that a large for only $0.25 extra?
MIRSKY Carl wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I wish I had thought of it... :-) Anyway, can we PLEASE end this now? We
ALL have our own opinions, and as is was stated several times, there is no
one OS
I have looked and searched and looked all over the software center and CCO
for
the place to download this damn thing!!! Can anyone send me a link of where
the hell the download page is for this so I can try it out??
Thanks a ton!!
Tony M.
#6172
Message Posted at:
yes they did cut my budget.yes i told them it was a bad idea and
yes they made me do it .
all it took was a UPS brownout to show them i was right.for my troubles
.. i was blamed by the customer and shunned by my employer...
all in all a good days work..
steve (once buggered
Have you tried the companies that specialize in media conversion? Canary,
www.canarycom.com, Transition, Lancast.
-Original Message-
From: Nabil Fares [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 04, 2001 9:32 AM
To: [EMAIL PROTECTED]
Subject: Help With Multimode Fiber [7:7075]
YES!
Thanks you !!!
Tony M.
#6172
- Original Message -
From: Vijay Ramcharan
To: 'Tony Medeiros' ;
Sent: Monday, June 04, 2001 7:44 AM
Subject: RE: QDM 2.0 (QOS device manager enhancement for IOS) [7:7079]
Would this be what you're seeking?
Would this be what you're seeking?
http://www-1.cisco.com/cgi-bin/tablebuild.pl/qdm
Vijay Ramcharan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Tony Medeiros
Sent: Monday, June 04, 2001 10:48 AM
To: [EMAIL PROTECTED]
Subject: QDM 2.0 (QOS device
Ahh, don't we all get those wonderfully exorbitant design requirements
with multiple tiers of redundancy and so very often a budget to barely
implement the base network with no redundancy? Management always expect
the network and design guys to come up with some hoodoo design for a
kickass
Hi guys
Can anyone tel me if the config for the DCE is clockrate or clock rate
Thanks
Tade
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=7089t=7089
--
FAQ, list archives, and subscription info:
paul,
you may just have been looking at a faulty hub.i`ve seen some strange
things with hubs.like being able to ping your gateawy but not bieng
able to ping yourself(not loopback).here`s a good test.plug the hub back
in with everything live...5 `ll get ya 10 it works
It is clockrate.
Thanks
Mohammad khalid
-Original Message-
From: Adekola, Dennis D [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 04, 2001 11:36 AM
To: [EMAIL PROTECTED]
Subject: serial interfaces [7:7089]
Hi guys
Can anyone tel me if the config for the DCE is clockrate or clock rate
Does anybody know what's the cheapest layer 3 Catalyst
I can get. Port number doesn't matter.
Thanks.
Adam
__
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/
Message
Stephen,
Your situation is very common. Especially with military contracts. The
Colonel is never wrong, but YOU are, even if you were ordered to implement
his solution.
Average and mid-level personnel are usually not blamed by
insecure/immature management because They were just doing
On 12.0 see the following. The configuration command is clock rate (speed)
2523(config-if)#clockrate ?
% Unrecognized command
2523(config-if)#clock?
clock
2523(config-if)#clock ?
rate Configure serial interface clock speed
2523(config-if)#clock rate ?
Speed (bits per
It must depend on the interface or version of IOS because on my 3640 running
12.04 its clock rate.
Cory
-Original Message-
From: IP Admin [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 04, 2001 10:50 AM
To: [EMAIL PROTECTED]
Subject: RE: serial interfaces [7:7089]
It is clockrate.
Do you want the New King James Version of the Bible? What?
You are asking the wrong crowd for dumps.
WARNING!!! YOU WILL GET FLAMED BY THESE PEOPLE IF YOU ASK FOR DUMPS!
And some of them are not kind.
- Original Message -
From: [EMAIL PROTECTED] (samuel chaing)
To:
Sent: Monday,
In what situation would you use the command no ip classless?
Cisco's site says
ip classless --- This command allows the software to forward packets that are
destined for unrecognized subnets of directly connected networks. The packets
are forwarded to the best supernet route.
no ip classless
A couple of thoughts on this matter. First, what changed? Is
this a new switch, or is this a switch you have been using that
all of a sudden woke up one day and started getting problems?
Did somebody attempt to upgrade the operating system? Can you
get into diagnostic mode?
More input is
I have this set up below: My problem is that I can not ping E0 on R2501
from anywhere. I also cannot enter a static route to it. How would I get
the 2501 to act as a gateway between the two networks? I've done some
searches and looked over some books but I'm still not getting out through
E0.
Not only is your english cute, but your internet searching skills leave alot
to be desired. :)
Try hotbot or something.
- Original Message -
From:
To:
Sent: Monday, June 04, 2001 9:21 AM
Subject: Re: where has the bible or dump for 504? [7:6883]
Do you want the New King James Version
On Mon, 4 Jun 2001, Rodney Spears wrote:
Can anyone please advise me of what is wrong with my
Switch? It keeps rebooting and rebooting into this
loop. Thanks in advance, the output from the 2900XL
is below.
Looks like a hardware problem to me. What does the TAC say? Or your
favorite
I just found this website and would like to share it with you all.
www.rentarack.com
Anwar
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
hal9001
Sent: Monday, June 04, 2001 9:30 AM
To: [EMAIL PROTECTED]
Subject: Re: RE:UNIX NT BEATING A DEAD OS
in answer to your question ..there really isnt one...
the 3100 does layer 2 and 3 switching but doesn`t have a REAL ios ...so no
good...
then you have a choice of
2948-LG3
3550-T12
4908-LG3
ALL of these are expensive ...i was quoted 6K(US) 4.5k (UK) for the
29.the rest i
John,
If I am not mistaking you are trying to setup PPPoE Client on win2k. If
yes then you can download PPPoE client software from
http://www.dslreports.com/pppoe.
thanks,
rahul.
- Original Message -
From: John Brandis
To:
Sent: Sunday, June 03, 2001 6:07 PM
Subject: Any know of
Hello,
I just bought a home lab today. The equipment in my lab will be as
follows. Does anyone have any input as to the quality of this lab setup?
What would you expand on in the future. Has anyone taken the CCIE lab that
can tell me what they think of this lab and possible scenarios I
MUST BE
clock rate
you can find that in Sybex Todd book.
Adekola, Dennis D wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=7109t=7089
--
FAQ, list archives, and
Comrades,
Please do not fan the flame the flames of the religious O/S war... from this
message.
I passed my Switch test this Saturday... Walking away with a big smile;
Thank you all for your help!
Due to my current Intel contract situation, I will be have to put my CCNP
drive and desire on
Usually a failure on POST means the Switch is Bad. You can try Xmodeming a
new IOS image to it, but I think this one is really broken.
TAC
1-800-553-nets
Ejay Hire
-Original Message-
From: Rodney Spears [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 04, 2001 8:36 AM
To: [EMAIL
I presume that the 8/16 is flash and memory. If it is then I would say that
you need a good few more routers. Although you do configure a token ring
switch in the lab I have heard that it is a very minimal config on this.
The other switch in use is the cat 5000, so there is no need to have any
Hi Friends
I have 2 checkpoint Firewalls configured for high availability and load
balancing mode. I need to configure the IP Multicast on both the Internal
and external interfaces of both firewall.
I have configured the common virtual IP on both the external and internal
I/Fs. I am using
Save your money on those high priced cds and buy a good book, some equipment
and your off.
- Original Message -
From: Stephen Flint
To:
Sent: Saturday, June 02, 2001 12:40 AM
Subject: Learning aids [7:6863]
Hi,
Would someone who is aware of self-study CDs please write and
your on a littlte rip-tear today, huh mike
- Original Message -
From: Michael L. Williams
To:
Sent: Friday, June 01, 2001 8:58 PM
Subject: Re: Technology Religion (was Re: last word: UNIX guys look down
[7:6855]
Isn't this group moderated? Can't the moderator kill out of control
Hello I need sample configuration for pix and exchange server !
jmpp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=7117t=7117
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
Think about another two serial interfaces on the 4000M.
A router that can be used as a terminal server is good. 2509/2511 are most
common.
I don't see any ISDN BRI interfaces. You'll want some. 2503
Depending on budget you might want to stay with the 2500 series or spring
for the newer 2600s. To
It's on www.cisco.com.
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/
Choose your version
configuration guide
Configuring for MS-Exchange
Learn to use the search engine on cisco.com. It's very useful for finding
info within minutes.
Allen
- Original Message -
From: Jose
i need a sample config for a GSR, a 7513, a 7206 with 400
interfaces, a can of glue, a bottle of orange soda, and two and a half
peanuts.
go away, or be more precise.
Peter Slow, CCNP Voice Specialist
Network Engineer
Planetary Networks
535 West 34th Street
New York, NY
10001
Cell:
We. i have a True l;ayer 3 catalyst.
its a cat 5 with sup III and nffc
Peter Slow, CCNP Voice Specialist
Network Engineer
Planetary Networks
535 West 34th Street
New York, NY
10001
Cell:(516) 782.1535
Desk: (646) 792.2395
Mail: [EMAIL PROTECTED]
Fax:(646) 792.2396
- Original
Hi Group,
I vill say ziss only vonce.
Okay, its my second attempt at trying to work out how I can bridge IP across
to 2500's.
I have 2 2500's configured with no ip routing. 2 PC's are connected at
either end, i.e one to bridge 1
and one to bridge 2. I have a sniffer on both PC's. I am
Tell us Louie what did you use.
Don
- Original Message -
From: Bradley J. Wilson
To:
Sent: Saturday, June 02, 2001 7:13 PM
Subject: Re: Cisco moving to a one day lab? [7:6735]
Well, again, Sir Edmund, just because the newcomers can be better-informed
before their attempts doesn't
Uhh, NAT perhaps!?
-humboldt
Peter Slow, CCNP Voice Specialist
Network Engineer
Planetary Networks
535 West 34th Street
New York, NY
10001
Cell:(516) 782.1535
Desk: (646) 792.2395
Mail: [EMAIL PROTECTED]
Fax:(646) 792.2396
- Original Message -
From: Bob Edmonds
To:
Sent:
Louie if you walk into a totally dark room and fall into a three foot hole,
how many feet have you fallen.
If you walk into an amply lit room and fall into a three foot hole, how many
feet have you fallen.
The bar hasn't been lowered the situation just got brighter. You didn't
obtain the needed
You are missing a default route to the internet.
ip route 0.0.0.0 0.0.0.0 206.107.237.x where x is the address of the cable
modem.
However if the 2521 can't see it, either somthing else is wrong.
Are the interfaces Up,Up?
A sh ip int bri should tell the tale on the 2501.
HTH
Doug
Message
Hi,
Hope somebody can enlighten me.
I got this router 2 uplinks and 1 connected to my LAN. When I performed sh
int on the respective interfaces, this was the result:
Uplink 1:
5 minute input rate 501000 bits/sec, 373 packets/sec
5 minute output rate 1748000 bits/sec, 330 packets/sec
The PC shouldn't ARP for a bridge. A bridge is transparent. It should ARP
for the end station. Something is weird with addressing and submasks.
Priscilla
At 03:22 PM 6/4/01, Philip Barker wrote:
Hi Group,
I vill say ziss only vonce.
Okay, its my second attempt at trying to work out how I
I think he would tell you but he still lives at home and he doesn't want you
to do donuts on his Mom's front lawn.
- Original Message -
From: Michael L. Williams
To:
Sent: Sunday, June 03, 2001 9:14 AM
Subject: Re: another OT: why you UNIX guys look down on we NT guys? [7:6985]
Are there any Cisco certification test center for 640-503 BSCN cheaper
(less than $100.00) than Sylvan Prometrics ? Thanks in advance.
FREDL AZARES
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=7132t=7132
--
FAQ, list
Peter dont be rude.. i know that u have achieved a
lot.
There is a sample configuration involving PIX and
Exchange server on cisco site. Ask ur good friend to
search there.
Thanks,
Tobproud
--- Peter I. Slow, CCNP Voice Specialist
wrote: i need a sample
config for a GSR, a 7513, a 7206
with
Ok here it is:
version 11.2
service udp-small-servers
service tcp-small-servers
!
hostname I need a
!
enable secret booger
!
ip subnet-zero
no ip domain-lookup
ipx routing glue.soda.peanuts
!
interface Ethernet0
ip address 235 front street
ipx network 100 encapsulation plastic tube
ipx
If you were running RIP V1 on your network,
correct design would dictate that all the local networks must
appear in the routing table of your routers.
If one of your users accesses a network not in the table,
the router would send an icmp network unreachable with no IP classless and
an icmp
Got a question on traffic shaping. Have a couple high speed frame pipes
going into data center/server farm locations. Speeds are 9.264MBPS at
datacenter, 6.176MBPS going into primary server farm, and 4.632MBPS going
into a less-used server location.
Remote sites are running from 128K to
Where did you get the 206.107.237.0 address?
- Original Message -
From: Bob Edmonds
To:
Sent: Monday, June 04, 2001 9:50 AM
Subject: Help with irksome situation = ( [7:7102]
I have this set up below: My problem is that I can not ping E0 on R2501
from anywhere. I also cannot
Cisco routers by default are still classfull, even though the internet has
long since gone classless.
For a router to effective understand CIDR routes that don't fall on
classfull boundrys it is necessary to turn off the default by executing the
command ip classless
If for some reason you live
I had a little trouble with the tcbc part of booksonline,
but I called (317) 541-8920 and they got everything strightened out to my
satisfaction.
--Original Message--
From: Michael L. Williams
To: [EMAIL PROTECTED]
Sent: June 4, 2001 1:00:30 PM GMT
Subject: Re: Book club [7:6811]
...he needs to do nat as well.
he has an entire network, and only one IP address
Peter Slow, CCNP Voice Specialist
Network Engineer
Planetary Networks
535 West 34th Street
New York, NY
10001
Cell:(516) 782.1535
Desk: (646) 792.2395
Mail: [EMAIL PROTECTED]
Fax:(646) 792.2396
-
.PICTURE THE SCENE...
it`s 8.30am your palms are sweating so much you try and pull open the
door of the cisco building your hands slips of the rail and you land smack
on your rump.a man walks past trying not to laugh with the words Cisco
Proctor emblazoned on a badge
Rumour of new lab test centre in London.
Anyone confirm or deny.
Gaz
Gernot W. Schmied wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
Great. Nowadays you have IPSec, MPLS, Voice, Optical and you still need
CLNS/CLNP
for IS-IS. You can also argue whether Appletalk or
Man Chuck, I didn't know you were that old?
Chuck's response actually brought up something interesting. How many
current CCIE's could just walk in and pass the lab again? I know several
CCIE's that could walk in off the street and pass the CCIE lab without a
problem, but I also know a couple of
1 - 100 of 175 matches
Mail list logo
