could u please tell me what are some new things on the new CCNA 507 exam
Dear Fellows!
I need a help. I'm working on 2503 Router and I have to configure it for
DDR. Since it doesn't have any async port i had to configure the auxillary
port to use as async and attache it with the modem. Can anyone of you guide me
to configure that auxilary port for DDR i.e. to con
Any Ideas on how can I configure a lab network to simulate ISDN can a cisco
router do this job if yes which router.
Regards,
Amir
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groups
Can anybody send me the IOS Software Version 11.3(5)T?
Because I don't have the CCO id to login download !!!
Pleasee...really need HELP
Thanks
Steiven Poh
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
R
Hello People!
Need your valued advice.
VoIP, though frequently heard, I have never had the opportunity to work on
it. Books are rare here in Bangladesh and only source of information is the
Internet.
So could anyone please let me know the useful resources on the web(just want
to be familiar w
Hi,
I have a 7500 series router. There are three interfaces, one is serial,
FE and atm. And only ATM port is using private IP. I have one PC with
ATM adapter connect to the ATM port through a ATM switch (non-cisco). I
can Ping from PC to the ATM port, but I cannot ping the other two
interfaces, e
What kind of modem are you using? Most of the times, it is the issue here.
However, when you place the "backup int asy 1" command, it drops the dtr signal
and goes into standby mode. When the main link is down, there is interesting
traffic and the backup condition (load or time) ocurrs, the route
t;
To: <[EMAIL PROTECTED]>
Sent: Friday, June 30, 2000 12:23 AM
Subject: Need help
> Any Ideas on how can I configure a lab network
to simulate ISDN can a cisco> router do this job if yes which
router.> > Regards,> Amir> >
___> UPDATED Po
Graybar or Anixter, etc. Also Specialized Products 800-866-5353.
Good service but most likely not the lowest price.
Simulators are expensive.
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, June 29, 2000 8:23 PM
> To: [EMAIL PROTECTED]
>
: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 29, 2000 9:23 PM
To: [EMAIL PROTECTED]
Subject: Need help
Any Ideas on how can I configure a lab network to simulate ISDN can a cisco
router do this job if yes which router.
Regards,
Amir
___
UPDATED
not the lowest price.
> Simulators are expensive.
>
> > -Original Message-
> > From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]
> > Sent: Thursday, June 29, 2000 8:23 PM
> > To: [EMAIL PROTECTED]
> > Subject: Need help
> >
> >
>
did not follow through with a complete config.
-Original Message-
From: K Sacca [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 30, 2000 4:54 PM
To: Daniel Cotts; '[EMAIL PROTECTED]'; '[EMAIL PROTECTED]'
Subject: RE: Need help
Try the following and see if it works.
; I did not follow through with a complete config.
>
> -Original Message-
> From: K Sacca [mailto:[EMAIL PROTECTED]]
> Sent: Friday, June 30, 2000 4:54 PM
> To: Daniel Cotts; '[EMAIL PROTECTED]'; '[EMAIL PROTECTED]'
> Subject: RE: Need help
>
>
>
t; I did not follow through with a complete config.
> >
> > -Original Message-
> > From: K Sacca [mailto:[EMAIL PROTECTED]]
> > Sent: Friday, June 30, 2000 4:54 PM
> > To: Daniel Cotts; '[EMAIL PROTECTED]'; '[EMAIL PROTECTED]'
> > Subject:
ROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, July 04, 2000 2:07 AM
Subject: Re: Need help
> Again, I have heard rumors but have yet to see it. Do you have any config
> examples?
>
>
>
> Evgeny Babanin <[EMAIL PROTECTED]> wrote in message
&g
I m just running a DNS server with Microsoft DNS
manager and I got 8 clients on the subnet. The problem
i having here is that I can ping all the clients from
DNS Server using their FQDN but when I try to ping the
DNS server from the clients they ping it only when I
give the Hostname i.e Labserver
I m just running a DNS server with Microsoft DNS
manager and I got 8 clients on the subnet. The problem
i having here is that I can ping all the clients from
DNS Server using their FQDN but when I try to ping the
DNS server from the clients they ping it only when I
give the Hostname i.e Labserver
Hello there,
How r u? i am new to this web site and i am quite amaze also and now
frequently visiting this web site.
I have a small question regarding my CCNP2.0. what if i give BCRAN exam
first in this CCNP2.0 track, which other topics that i need to take care of.
I am in india and no other bo
Do you really understand what is CCO id in Cisco???
- Original Message -
From: "Ryan Ngai Hon Kong" <[EMAIL PROTECTED]>
To: "'Steiven Poh (Jaring)'" <[EMAIL PROTECTED]>
Sent: Monday, March 19, 2001 9:48 AM
Subject: RE: URGENT
Hi All,
I need help from you all. I have installed MRTG for Win NT 4.0 for monitoring
the devices.
I have connected around 30 E1's Streams and 2 nos of ISDN PRI on the Access
Server and 3COM TCH RAS.
While running the MRTG for Access Server 5800 and 3Com TCH i am able to get the
utlis
Hi,
Attached are some of the BSCN questions which are creating lot doubts in
my mind. I found these questions on one of the web site while preparing
for BSCN exam. Please help me in understanding them as web site's
evaluation said that my answers were wrong.
Please spare some time for these ques
Try the following link
http://www.cisco.com/warp/public/793/voip/
Larry Osei-Kwaku
--- Ishtiaque Mahbub <[EMAIL PROTECTED]> wrote:
> Hello People!
>
> Need your valued advice.
>
> VoIP, though frequently heard, I have never had the
> opportunity to work on
> it. Books are rare here in Bangl
Dear All,
Hello! I have a problem about network design. Please help me as I don't
know how to solve it.
I have a client with network design
|---R1-R2Internet
||
NW1 NW2
1) NW1 clients need access NW2 resources;
2) NW1 clients n
Hi! to all, I passed my CCNA by 903 marks & preparing for ccnp ,kindly help
me
by from where to get the free stuff.
mail at [EMAIL PROTECTED] more from the Web. FREE MSN Explorer
download : http://explorer.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6182&t=6182
-
I am interested in your opinion guys. I am interested in studying for my
Cisco certs. I have troytec and Boson tests. How would you rate the two
companies.
Thanks
-Original Message-
From: Provost, Robert [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, December 04, 2001 3:55 PM
To: [EMAIL PROT
Hi,
I have two router connected through a WAN link. When i show the interface,
both Serial and link protocol were up, but when i ping each other, failed.
Can someone told me what is the possible problem?
Thanks
Mok
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=33353&t=33353
Greetings,
I've configured Etherchannel on my router and it seems
the MLS defaulted to VTP-Domain -NULL-. I tried to
change it with no luck. I removed all the
subinterfaces in the channel-group and I tried to add
the Port-channel interface to the domain, still no
luck. Any pointers.
Hello all,
I am currently studying for CCNP 2.0 exams. I have a
question that If I can pass new Version exams by
studying CCNP 1.0 books and notes Please write me
back.
Another question is about my Career. I am in NY but
willing to relocate to get any good Cisco opportunity.
But is it p
Hi Vikas,
There is no hard & fast rule or fashion on sequence of exams to be taken.
As for CCNP2.0 Cisco Press books r already out in market (published by
Techmedia)in India.
As for me i prefer the old sequence of taking CCNP exams: 1) routing (BSCN),
2) switching(BCMSN), 3) Remote Access(BCRAN
on line console 0, I added the 'no exec time-out' command. thereafter, it
freeze then I couldn't do anything but power cycled the router. I can see
it reboot but still freezes on me with no keyboard input capability. This
is a 2501, my line connection is on it's console port. Before I did this
bericht-
Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Namens Shahid
Muhammad Shafi
Verzonden: maandag 5 februari 2001 4:10
Aan: [EMAIL PROTECTED]
Onderwerp: Need Help ( DNS Server)
I m just running a DNS server with Microsoft DNS
manager and I got 8 clients on the subnet. The problem
i having
Guys,
Can anyone please recommend some CCIE resources...
i`m thinking
NETGUN EXtreme from geo-train
also
CCIEBootcamp
please Review
thanks in advance
steve (i`ve had a quick check of the archives but couldn`t find much)
_
We currently have two sites, both with their own PIX firewalls and their own
connections to the Internet via separate ISPs. We also have a T1 point to
point directly connecting both sites. Router A has a default route to PIX
A. Router B has a default route to Router A. At site A we have a
prod
IL PROTECTED]
> Subject: BSCN questions --need help
>
> Hi,
>
> Attached are some of the BSCN questions which are creating lot doubts in
> my mind. I found these questions on one of the web site while preparing
> for BSCN exam. Please help me in understanding them as web site&#x
> From: Mahesh Gupta [SMTP:[EMAIL PROTECTED]]
> > Sent: Monday, December 04, 2000 5:54 PM
> > To: [EMAIL PROTECTED]
> > Subject: BSCN questions --need help
> >
> > Hi,
> >
> > Attached are some of the BSCN questions which are creating lot doubts
Greetings,
Anyone out there willing to help me set this baby up, its driving me crazy.
Please let me know and I'll email you directly.
Thanks,
Nabil
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nond
The questions you have quoted came from the Cisco Colt exams...
I have found from extensive checking that many of the questions are scored
wrong at the website.
Tom
--
Tom Keough MCSE CCNA
AT&T Global Network Solutions
Standard Access Management
Managed Router Service
Tier 2 Technical Support
Tam
Hello Everybody
I need to know that can i find case study diagrams on
the internet somewhere for the Designing Cisco
Networks book by Diane Teare.
Ill be grateful to u guys.
Shahid
=
Shahid Muhammad Shafi
MSc Telecommunications Candidate
University of Colorado Boulder
BSEE(GIKI),MCSE+I,CNA,CC
Hi
I am looking for Voice over Ip configuration for 3COM AS 400 Series of
router.3 Com had already stopped this product , if any one has some comman set
or some type of notes on that please let me know..
Himanshu
Get free em
Choose 4 types of routers that support ISDN
a. 700 series
b. 1000 series
c. 1600 series
d. 2500 series
e. 3600 series
f. AS5200
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations t
Hi! Everyone,
I got the 2 2503 routers and Teltone ILS-2000 ISDN line simulator. I try to
learn the lab # 2 in the book All-in-One CCIE Lab study guide. I follow all
the step in the book but I can not ping from RouterA to RouterB. Can you
show me how to use the simulator?
TIA
Howard
___
Hello everybody,
Tomorrow I am going for my BSCN Exam. I heard lot of things about this exam.
I know that this is very tough exam.
I will appreciate if anybody can give me last minute guide.
Moreover let me know if anybody knows last minutes tips and resources. ( I
mean if anybody has dumps and
]
Subject:Need help [7:6182]
Hi! to all, I passed my CCNA by 903 marks & preparing for ccnp ,kindly help
me
by from where to get the free stuff.
mail at [EMAIL PROTECTED] more from the Web. FREE MSN Explorer
download : http://explorer.msn.com
FAQ, list archives, and subscription info:
Hi Guys
I just installed Boson 3.88, but after installation my computer is behaving
in a bizarre way. Since this is the only software i installed since this
funky behaviour, i doubt that this could be the problem, if anyone of u
including boson guys have 3.84, kindly email me.
Thanks
_
Dear all
My office applicate is Easy Clear but when i use this
function to print out
document ,
it prompt
"OLE error code 0x80040154 class not registered OLE object is being
ignored Record
number :4 "
then prompt fatal error " Error number is 1925 "
How to solve this problem
I want to get a IP address or small block of IP's that are registered.
I'm not sure exactly how to do this and what it will cost.
I own a domain already but it is hosted by a service provider.
I know have dsl and a static IP for that but I will want to host my own
stuff soon.
Don't know how to do
There could be several things...as a starter pls verify that router
interfaces are in same subnetand configured with with identical
netmask...also verify that encapsulation is same at both ends
ak
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=33388&t=33353
---
If you can, send -
1 - config
2 - show interface
3 - if this is a cisco router, sh cdp nei det
Is this over lease circuit or something like frame relay?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=33391&t=33353
--
FAQ, list a
Hi,
Thanks for your help. I finally found out that the service provider's E1
port for the WAN link was faulty.
Thanks a lot.
Regards,
Mok
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=33406&t=33353
--
FAQ, list archives, and
Hello GroupStudy.com,
Need to connect a few Cisco routers and switches to a 2511.
first question...
Should I connect the async cables to the 'console' port or 'aux' port of
my devices?
second question...
Do I also need to configure the routers and switches - or just configure
the 2511?
third
Greetings,
Could anyone provide information in regards to passing the CCIE written
exam for the WAN certification.
Thanks for your help!!
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://w
Hi all, my pix firewall has 4 interfaces, 1st interface use for outside
(external), 2nd interface for inside (internal), 3rd interface for dmz1, 4nd
interface for dmz2. No NAT is necessary for this network design. the
security level for each of the interface is :
outside - security0
dmz1 - securi
I have that same question. Can anyone help?
--- Sabeen Student <[EMAIL PROTECTED]> wrote:
> Hello all,
>
> I am currently studying for CCNP 2.0 exams. I have a
> question that If I can pass new Version exams by
> studying CCNP 1.0 books and notes Please write
> me
> back.
>
> Another
The archives have tons of posts on these two topics. You should check there
first to avoid making people answer the same questions again. If you don't
find exactly what you're looking for, feel free to check back with the
group.
I don't want to discourage questions of this sort at all, but I do
ct to Microsoft (usually referred to as MS).
No flames please... just an observation.
-Original Message-
From: Kevin Cullimore [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 20, 2002 10:49 PM
To: [EMAIL PROTECTED]
Subject: Re: need help !!! [7:49315]
RS generally exhibits fewer instance
depend upon the types of anomalies
> observed. Your example doesn't necessarily correlate well with observed
> RS
> behavior. Do you have others?
>
> - Original Message -
> From: "cebuano"
> To:
> Sent: 20 July 2002 9:21 pm
> Subject: RE: need help !!! [
my curiosity from the subtle tone of
> ill-respect to Microsoft (usually referred to as MS).
>
> No flames please... just an observation.
>
> -Original Message-
> From: Kevin Cullimore [mailto:[EMAIL PROTECTED]]
> Sent: Saturday, July 20, 2002 10:49 PM
> To: [EMAIL PR
Consider telnet into one of the interfaces.
> -Original Message-
> From: Sisqo [mailto:[EMAIL PROTECTED]]
> Sent: Monday, February 05, 2001 7:53 PM
> To: [EMAIL PROTECTED]
> Subject: need help with console connnection
>
>
> on line console 0, I added the &#
der telnet into one of the interfaces.
>
> > -Original Message-
> > From: Sisqo [mailto:[EMAIL PROTECTED]]
> > Sent: Monday, February 05, 2001 7:53 PM
> > To: [EMAIL PROTECTED]
> > Subject: need help with console connnection
> >
> >
> > on li
Go to rom monitor mode by press ctrl+break. Change config register to 2142.
so that it boot up ignoring NVRAM. then reboot change your startup config
and save
""Sisqo"" <[EMAIL PROTECTED]> wrote in message
95nova$irp$[EMAIL PROTECTED]">news:95nova$irp$[EMAIL PROTECTED]...
> on line console 0, I a
[mailto:[EMAIL PROTECTED]]On Behalf Of
IC Lee
Sent: Monday, February 05, 2001 6:50 PM
To: [EMAIL PROTECTED]
Subject: Re: need help with console connnection
Go to rom monitor mode by press ctrl+break. Change config register to 2142.
so that it boot up ignoring NVRAM. then reboot change your startup
c-banner exec-character-bits exec-timeout
>
> R8(config-line)#no exec-timeout
>
>
> Brian Dennis
> CCIE #2210 (R&S)(ISP/Dial)
> CCSI #98640
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> IC Lee
> Sent: M
am [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 16, 2001 2:38 PM
To: [EMAIL PROTECTED]
Subject: Scenario we need help with...
We currently have two sites, both with their own PIX firewalls and their own
connections to the Internet via separate ISPs. We also have a T1 point to
point directly
are of another solution involving the arrow-point switches, that
> could have a shorter roll-over time, but I have never tried it.
>
> Hope this helps,
> Matthew
>
>
> -Original Message-----
> From: Sam [mailto:[EMAIL PROTECTED]]
> Sent: Friday, February 16, 2001 2:38 P
001 5:38 PM
To: [EMAIL PROTECTED]
Subject: Scenario we need help with...
We currently have two sites, both with their own PIX firewalls and their own
connections to the Internet via separate ISPs. We also have a T1 point to
point directly connecting both sites. Router A has a default route to
Hi group,
Tried to do Lab #9 (page 183 of All-in-one CCIE Lab Study guide). I was
using a 4500 as frame relay switch and two 2501.
Every 'Sh' command output were basically same as the book. The only
exception is 'Sh frame map' on each of the two routers (RouterA & RouterB).
RouterA#sh frame map
Hi all,
I am trying to dial ISP by using modem analog in cisco 805 (connected to
serial port). I already use Fast step and Config maker but yield no result.
I only able to dial in, the modem get disconnected a few minutes after
dialin established. I put some debugging message below in case anybody
I have a Cisco 7206 with an IMA card and two ATM T-1 circuits going into the
4 port IMA card. About every two weeks the router freezes up. Usually a
reboot brings it back. Everytime the router reboots, the log gets cleared.
Is there a way I can troubleshoot the hardware and/or IOS with this and
Good morning.
I need help from a dlsw guru. I have entered a client site with an odd
dlsw configuration. I can't determine if the config doesn't make sense, or
if I don't know what I am talking about. It DOES work, but I don't think
it is optimal, and I'd like to clea
that book. someone will
help out with the title it slips my mind
Duck
- Original Message -
From: Shahid Muhammad Shafi <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, December 15, 2000 2:00 PM
Subject: Need help on CCDA Diagrams
> Hello Everybody
> I need to kno
I have a cisco router 2501 and I cannot boot to the prompt. The Router
starts fine and hangs during the boot up. I have tried to get into the
ROMMON prompt, that did not worked. I also swaped the flash memory with
another 2503 and still I cannot boot to the prompt.
I need it for my home lab.
They all support ISDN
On Mon, 13 Nov 2000, Jay De Leon wrote:
> Choose 4 types of routers that support ISDN
>
> a. 700 series
> b. 1000 series
> c. 1600 series
> d. 2500 series
> e. 3600 series
> f. AS5200
>
>
> _
> FAQ, list archives, and subscription info:
Hello Cisco Lovers,
thanks to all your wonderful posts,
I passed my second exam on the road to CCNP, I need some links for BCSN
resources due to the fact that I am waiting on my book from Cisco Press that
is currently out of stock...
Please Advise,
Kevin
_
FAQ,
layer one and two
connectivity. Troubleshooting is a necessary skill to master. Good luck.
> -Original Message-
> From: Hoa Ngo [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, March 28, 2001 8:55 PM
> To: [EMAIL PROTECTED]
> Subject: Need help with ISDN simulator.
>
>
&g
Did you terminate your cisco 2503 at NT1 equipment?
""Hoa Ngo"" <[EMAIL PROTECTED]> ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi! Everyone,
> I got the 2 2503 routers and Teltone ILS-2000 ISDN line simulator. I try
to
> learn the lab # 2 in the book All-in-One CCIE Lab study guide
I inherited a PIX and need help identifying it. It's gray with a door in the
front and small lock. Inside the door is a floppy drive on the right side
and fan on the left. In the back the part number is 47-3158-01. The chassis
is only idenified as a PIX and there is no model number. In the
What the..???!!
""parky chan"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Dear all
> My office applicate is Easy Clear but when i use this
> function to print out
> document ,
> it prompt
> "OLE error code 0x80040154 class not registered OLE object is being
> i
chan"
cc:
Sent by: Subject: MCSE need help
[7:15235]
nobody@groups
I think I'm running 3.67 but here is an e-mail anyway.
- Original Message -
From: "Irfan Shahab"
To:
Sent: Wednesday, August 08, 2001 12:18 AM
Subject: I need help [7:15226]
> Hi Guys
>
> I just installed Boson 3.88, but after installation my computer is
reinstall office
microsoft as usuall
- Original Message -
From: "parky chan"
To:
Sent: Wednesday, August 08, 2001 2:54 PM
Subject: MCSE need help [7:15235]
> Dear all
> My office applicate is Easy Clear but when i use this
> function to print out
>
Reboot.
-Original Message-
From: parky chan [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 08, 2001 3:55 AM
To: [EMAIL PROTECTED]
Subject: MCSE need help [7:15235]
Dear all
My office applicate is Easy Clear but when i use this
function to print out
document ,
it prompt
Oh my god! Not fatal error 1925! Place the computer in a box and send it
to:
Bill Gates
Redmond WA
""parky chan"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Dear all
> My office applicate is Easy Clear but when i use this
> function to print out
> document ,
>
you better ask yourself, are you in the right newsgroup.
""parky chan"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Dear all
> My office applicate is Easy Clear but when i use this
> function to print out
> document ,
> it prompt
> "OLE error code 0x80040154 clas
you what is up...
the class needs to be registered. You can find information on how to do that
by searching the knowledge base at microsoft.com
the other is searchable too.
- Original Message -
From: Dennis Bailey
To:
Sent: Wednesday, August 08, 2001 9:17 PM
Subject: Re: MCSE need help
s to be registered. You can find information on how to
do that
> by searching the knowledge base at microsoft.com
>
> the other is searchable too.
>
> - Original Message -
> From: Dennis Bailey
> To:
> Sent: Wednesday, August 08, 2001 9:17 PM
> Subject: Re: MCSE
Hey, wait...wasn't that the Unabomber's technique?? ;-)
-Original Message-
From: Dennis Bailey [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 08, 2001 10:17 PM
To: [EMAIL PROTECTED]
Subject: Re: MCSE need help [7:15235]
Oh my god! Not fatal error 1925! Place the compute
you might begin here... http://www.arin.net/index.html
-Original Message-
From: Keith J. [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 29, 2001 11:29
To: [EMAIL PROTECTED]
Subject: I need help [7:17713]
I want to get a IP address or small block of IP's that are registered.
I&
he
service provider to your new addresses.
-e-
- Original Message -
From: "Keith J."
To:
Sent: Wednesday, August 29, 2001 11:29 AM
Subject: I need help [7:17713]
> I want to get a IP address or small block of IP's that are registered.
> I'm not sure exactly how to do t
J. [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, August 29, 2001 11:29
> To: [EMAIL PROTECTED]
> Subject: I need help [7:17713]
>
>
> I want to get a IP address or small block of IP's that are registered.
> I'm not sure exactly how to do this and what it will cost.
>
Hi All,
Has anyone taken the CCIE WAN written exam yet?
I need help on study materials, url sites, or any information I can used
to pass this
exam in three weeks. Yesterday, I took the CVOICE 2.0 beta exam - I
found it very helpful in understanding the MC3810.
Thanks
Hi Members,
If anyone has taken the written exam for the CCIE WAN certification,
please email me any websites, study guides, or group sites that I can
use. I am scheduled to take the written exam in three weeks.
Yesterday, I took the CVOICE 2.0 beta exam - not an easy exam, but
helped me to bett
Hi Members,
If anyone has taken the written exam for the CCIE WAN certifications,
please email me any websites, study guides, or group sites that I can
use. I am scheduled to take the exam in three weeks.
Yesterday, I took the CVOICE 2.0 beta exam - not an easy exam, but
helped me to better unde
I'm taking the ACRC exam on Saturday July 30. The test retires July 31. I
took the exam twice and failed. This time around I'm going to concentrate on
OSPF, EIGRP and show commands. And follow the out line if the course word
for word. Does anyone have any suggestion? I will greatly apprecia
Search these archives for 'Reverse Telnet' , you will find everything you
need.
- Original Message -
From: Nick Mackovski <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, August 14, 2000 7:38 PM
Subject: need help to config 2511...
> Hello GroupStudy.c
Hi Nick,
See my comments on line.
Regards,
Karthik.
At 10:38 PM 8/14/00 -0400, Nick Mackovski wrote:
>Hello GroupStudy.com,
>
>
>Need to connect a few Cisco routers and switches to a 2511.
>
>first question...
>Should I connect the async cables to the 'console' port or 'aux' port of
>m
In a message dated 8/14/00 10:51:34 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
<< Hello GroupStudy.com,
Need to connect a few Cisco routers and switches to a 2511.
first question...
Should I connect the async cables to the 'console' port or 'aux' port of
my devices?
second question
-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Nick Mackovski
Sent: Monday, August 14, 2000 9:38 PM
To: [EMAIL PROTECTED]
Subject: need help to config 2511...
Hello GroupStudy.com,
Need to connect a few Cisco routers and switches to a 2511.
first question...
Should I connect the
Hi all,
I'm trying to connect a TR LAN to a Ethernet LAN via a router/bridge as part
of a migration exercise. And the restriction is that both the LANs must
utilise the same IP addressing subnet/space. I understand that source-route
translational bridging is the way to do bridging between these
Lee - for $200 an hour I'll tell you! Just kidding - you should really
spend some time on CCO as they describe way better than I could how this is
accomplished. Here's a link to start you off:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_v51/config/ind
ex.htm
And a note:
from
Kenny's note is incorrect.
from low security to high security you need static + conduit
"lee" <[EMAIL PROTECTED]> wrote in message
8hr2or$3c5$[EMAIL PROTECTED]">news:8hr2or$3c5$[EMAIL PROTECTED]...
> Hi all, my pix firewall has 4 interfaces, 1st interface use for outside
> (external), 2nd interfa
1 - 100 of 312 matches
Mail list logo
