Anyone have any suggestions on books to read for switching exam?
--
Get the Latest News at CNN Interactive: http://CNN.com
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Hi people,
Cleared Switching this morning. It was pretty tough , as this was the first CCNP exam .
Hope to clear Routing soon.
1 down 3 to go.
Shree.
_
Chat with your friends as soon as they come online. Get Rediff Bol at
http
Hi,
I was reading Karen Webb book on Building Cisco Multilayer Switched Networks
(BCMSN). I came across some information on Layer 4 switching that somehow I
didn't understand. It says that "Layer 4 switches refer to Layer 3 hardware
based routing that consider the applications. &quo
Can anyone tell me what's the difference between fast switching and cef
switching?
thanks first!
Ellie
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71815&t=71815
--
FAQ, list archives, and subscripti
Can anyone tell me what's the difference between fast switching and cef
switching?
thanks first!
Ellie
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71905&t=71815
--
FAQ, list archives, and subscripti
Hello everyone,
I have a question that probably will sound silly but here it is:
Suppose that you take a new 2924 out of the box and you plug in two PC's.
You assign address, for example, 142.102.2.1 to the first one and
142.102.3.1 to the second one.There is not any router in this small
network.
I'm taking the switching exam soon. I've read the BCMSN courseware book and
have lots of hands-on experience. However, I have not done any multicast
configurations in the real world. Is multicasting hit pretty hard on the
exam? Anyone have any good references for the subject? Tha
I really enjoyed this link and appreciate your reply, for everyone else read
through this article this link goes for a nice look at different switching
types.
http://www.nwc.com/1004/1004ws2.html
>From: "Howard C. Berkowitz" <[EMAIL PROTECTED]>
>Reply-To: "H
Just passed switching with a 934...it seemed that there was a TON of
stuff on trunking. I used the Todd Lammle/Sybex book and a fair amount
of lab time/experience and got a respectable score.
Next up: Remote Access.
gordon
_
FAQ, list archives, and
hi all,
while studying for the support exam I came across
Silicon switching, netflow switching , silicon
switching , Automonous switching , process switching
etc.
I am confused by so many switching types and what
routers support them
anyone can give me a quick brief overview and what it
will
I used the Cisco Press Building Cisco Multilayer Switched Networks and passed.
Manny
[EMAIL PROTECTED] wrote:
> Anyone have any suggestions on books to read for switching exam?
>
> --
> Get the Latest News at CNN Interactive: ht
lto:[EMAIL PROTECTED]]
Sent: Tuesday, March 13, 2001 11:13 PM
To: [EMAIL PROTECTED]
Subject: Re: Switching
I used the Cisco Press Building Cisco Multilayer Switched Networks and
passed.
Manny
[EMAIL PROTECTED] wrote:
> Anyone have any suggestions on books to read for s
I didn't have any ATM and never heard anyone else mention anything about ATM
being on BCMSN.
Tim
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> LeBrun, Tim
> Sent: Wednesday, March 14, 2001 4:02 PM
> To: [EMAIL PROTECTED]
>
Hi All,
A quick Question, How much IP Multicasting is there
on the Switching exam ?
I've not done any multicasting in practice - should
I be worrying about its content for the exam.
Steve
All,
Has anyone got a list of links to FREE example questions.
Steve
Steven Dangerfield, Network Engineer/Analyst
B.Eng, CCNA, CCSA
Email : [EMAIL PROTECTED]
Totalise - the Users ISP
-
To become a member and a shareholder
visit http://www.totalise.
My understanding of how most switches work is that one port is mapped to one
MAC address, correct? If this is indeed true, what happens when you attach
a hub to a switch port? I know that it is still functional, but what does
the switch do for the additional hub MAC addresses that are hanging of
Would anyone be so kind of sending me the index of the switching course?
. I've read CCIE LAN Switching, and I'd like to know what should I
concentrate on. I'm taking Foundation next week and I tend to think the
index is a lot more reliable outline of the test.
Thank you!
Hi..
I am scheduled to take my Switching 2.0 exam on 16th of this month. When I
looked at the objectives that cisco have for the exam, it also included
ATM, LANE etc..But, the Karen Webb book doesn't have any ATM chapters in
it. Also from the previous listings I didn't find anyone ment
What are the benefits of layer3 switching
(versus layer2)? Can I create VLAN's w/o using a router on a layer3
switch?
hello,
I'm preparing to take Switching 2.0 exam. I
would like to know if ATM(LANE) is part of this exam.
tks in advance,
Roberto Omori
Need a suggestion.
1. Can this be done.. logically segment the network by assigning VLANs to
the switch ports that the 5 hubs (existing hardware) are connected to a
switch. Cost is also an issue here.
2. Switch A, port speed can only be set to half duplex for either 10 or 100
Mbps, a known issue
Hi all,
Which switching book would you recommend I use to
assist me in setting up the new switches I have
coming. I'll be using two 4006's as the backbone and
3508's, 3524's, and 3548's as my switches. Any
insight anyone can lend is appreciated.
Thanks in ad
HI there
i was looking for some basic stuffl for WAN
Switching to have some basic concept of PBX MGX etc . if any one know any
link which can be usefull ?
thanks
Haroon Ikram
Hi,
Is there any web site dedicated particularly for CCIE WAN-Switching ?
Cheers,
Carlos
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and
According to --
http://www.cisco.com/warp/public/cc/pd/si/casi/ca3500xl/prodlit/3500x_ov.htm
"Catalyst 3548 XL---A single-rack-unit (RU), stackable 10/100 and Gigabit
Ethernet switch with 48 10BaseT/100BaseTX ports and...
...two GBIC-based Gigabit Ethernet ports...
The Catalyst 3548 XL is idea
Hi there all
Does anyone know if you get a blade for the 6500 where you can fit an
ordinary hdlc serial in ?
Seems like you only get blades for the high end stuff (atm , e1, e3) etc .
Thx in advance
Olden Pieterse
Pre-Sales Consultant
Westcon
Tel: +27 21 415 7211
Fax: +27 21 419 753
Hi;
Anyone has the following exam information, please inform me.
Thanks
Vincent
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclos
hi !
i am planning to give the switching exam next month.i have gone thru
Cisco Lan switching book from cisco press.I dont know the structure of the
exam ,whether it covers all cisco switches like 8500.please guide me in
this.thank u .
vs
Hi guys,
I am studying Kevin Downes/Tim Boyles's CLSC book for Switching 2.0. I am
taking the exam this coming Wednesday. If anybody can tell me any thing new
in Switching 2.0 exam that was not covered in CLSC? I would really
appreciate that.
I have browsed studygroup archive but d
Does
anybody have info on the Cisco Press book:
Building Cisco Multilayered Switched Networks
?
I've
found two different publication dates: October 1998
and
May 2000, and both have the same ISBN number
listed
for it.
I
really don't want to buy a 1998 book for a 2000 exam.
RM
CCNA
Hi Group.
Got an interesting problem with Netflow switching. After enabling it on a
interface, when I try to display the statistics on the flows, the command
does not exists? (show ip route flow). This command show be available since
I am running 12.0(8) on one of our test 7000 series routers
After 3 days nobody has an answer yet?
When the entry in the CAM table times out the 5k will relearn the
MAC/Port of said server and joy will prevail in mudville ;-}
Just clear the CAM table!
How is left as an execise to the reader...
___
UPDATED Posting Guideli
Hi,
I have some confuse about the "Fast Switching" and "Layer 3 switching". Both
of them are mentioned that route first packet and switch others. Could
anyone please help me?
Regards.
dovelet
_
FAQ, list archives, and sub
Hello,
Has anyone used cisco's lan switching package for the switching exam?,
if so how helpful was it?
http://www.cisco.com/warp/public/710/lst/module7/mod7_config.html
Cheers
Kerry
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com
t;[EMAIL PROTECTED]> escribió en el mensaje de noticias
[EMAIL PROTECTED]
> Hi,
>
> I was reading Karen Webb book on Building Cisco Multilayer Switched
Networks
> (BCMSN). I came across some information on Layer 4 switching that somehow
I
> didn't understand. It says that &q
Layer 4 switching means that a router can forward packets based on L4
information such as TCP port #. This can be used to prioritize specific
applications and is currently supported by most vendors. Products from
vendors such as Allot, Top Layer and others can even make decisions based on
We use an Alteon Web Switch that uses "layer 4 switching". I don't know if
the concept is the same for cisco switches, but this is how it works on the
Alteon:
Each web site is assigned a "virtual IP" that is not assigned to any host;
it is defined in the switch con
, wouldn't
it? Also, most applications that need a certain QoS would need higher layer
switching, as L3 alone won't cut it.
Francisco Muniz
"Arigo, Francis" <[EMAIL PROTECTED]> escribió en el mensaje de noticias
[EMAIL PROTECTED]
> We use an Alteon Web Switch that uses
eny
""Arigo, Francis"" <[EMAIL PROTECTED]> wrote in message
304545310AD0D3118F9900600897AD9A07743B@GALILEO">news:304545310AD0D3118F9900600897AD9A07743B@GALILEO...
> We use an Alteon Web Switch that uses "layer 4 switching". I don't know if
> the conce
Fast switching builds a forwarding cache on the fly, based on the packets
that reach the router and need to be switched. CEF builds the "cache" (CEF
table) based on the routing table, independently from the traffic.
The fast switching cache does not (necessarily) contain all the i
Does the CEF cache and Fast Switching cache reside in router memory? And
if so what makes CEF faster
than Fast Switching?
Regards,
Jans
>Fast switching builds a forwarding cache on the fly, based on the packets
>that reach the router and need to be switched. CEF builds the "cache&qu
Besides, load balance in CEF considers origin/destination , whereas Fast
Switching only makes load balance by destination .
Of course, there is per-packet in both , also.
> _
> Henrique Issamu Terada, CCIE # 7460
> IT Support - Open Network
Zsombor explained it pretty well but if you want more detail:
http://www.cisco.com/en/US/customer/tech/tk827/tk831/technologies_white_paper09186a00800a62d9.shtml#express
Dave
Jans van Deventer wrote:
> Does the CEF cache and Fast Switching cache reside in router memory? And
> if s
At 04:37 PM 7/3/2003 +, Jans van Deventer wrote:
>Does the CEF cache and Fast Switching cache reside in router memory?
Yes.
> And
>if so what makes CEF faster
>than Fast Switching?
The cache structure is more efficient.
Thanks,
Zsombor
>Regards,
>Jans
>
>
Couple of other minor points to add. The fast switching cache is on the
RSP and uses it's memory as does CEF. You can distribute the CEF tables
to VIP (versatile interface processors) cards. This enables the VIP
cards to store and process the packets based on the CEF tables on the
VIP
he FIB and Adjacency tables to the VIP's so they can handle it and
hence free up the RSP.
Hope that helps,
Ian
www.ccie4u.com
Rack Rentals
-Original Message-
From: Zsombor Papp [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 03, 2003 8:02 PM
To: Sales
Cc: [EMAIL PROTECTED]
Subject: RE:
CEF is better than fast switching for sure. Distributed CEF however doesn't
free up memory on the RSP per se, as the RSP still has to build up and
store the CEF table.
I am also not sure whether the VIP cards can't do switching on their own
without CEF. You sure about this?
Thanks
Hi,
Brief:
Fast switching is as follows, 1st packet is processed switched, 2 packet to
destination is fast switched. i.e. it never goes through the cpu.
L3 switching , MLS, Multi layer switching, This is based on traffic flows,
ie we could swich on a certain tcp flow, or certain source
Stuart,
I do not think any packets could be switched without CPU. Fast switching
needs CPU, it just does not need the CPU to call the ip input process. If
the router needs to search the routing table, it will need ip input process,
other than that, the CPU can use cache during one interrupt. As
>Stuart,
>
>I do not think any packets could be switched without CPU. Fast switching
>needs CPU, it just does not need the CPU to call the ip input process. If
>the router needs to search the routing table, it will need ip input process,
>other than that, the CPU can us
Henrique Issamu Terada wrote:
> Besides, load balance in CEF considers origin/destination , whereas Fast
> Switching only makes load balance by destination .
> Of course, there is per-packet in both , also.
Actually, there is no per-packet load balancing in fast switching. The
only w
Hi everyone,
Last week I sat the Switching exam and passed. I didn't find it as easy
some people said, and only got 857. But I'm happy I passed anyway :o)
There were some straightforward questions, but some really hard ones as
well, which the answers I thought weren't in the b
I simply wanted to say thanks to those who have helped me pass my Switching
2.0 last Saturday, but the e-mail I wrote (last Saturday) must contain
something that are not allowed through the filter, because I have tried to
send it many times now, and even Jennifer Cribbs has been nice enough to
ssage-
From: alexs [mailto:[EMAIL PROTECTED]]
Sent: Saturday, September 09, 2000 7:42 AM
To: [EMAIL PROTECTED]
Subject: Ethernet switching
Hello everyone,
I have a question that probably will sound silly but here it is:
Suppose that you take a new 2924 out of the box and you plug in two PC
-
From: Fowler, Joey
To: [EMAIL PROTECTED]
Sent: 1/31/01 10:52 AM
Subject: RE: Ethernet switching
Depends on the subnet mask you are using, for instance
142.102.3.1 with a subnet mask of 255.255.0.0
142.102.2.1 also with a subnet of 255.255.0.0
The 2.1 and 3.1 would be on the same subnet, however if
: Wednesday, January 31, 2001 11:24 AM
To: 'Fowler, Joey '; '[EMAIL PROTECTED] '
Subject: RE: Ethernet switching
These are my thoughts,
If the switch was right out of the box, the stations could ping each other
no matter what subnet mask you were using. The reason being, they are
27;Fowler, Joey '" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Thursday, February 01, 2001 5:23 AM
Subject: RE: Ethernet switching
> These are my thoughts,
>
> If the switch was right out of the box, the stations could ping each other
> no matter what subnet m
t
> 192.x.x.x/28 and still get a ping response
>
> Kane
>
> - Original Message -
> From: "Sheahan, Ryan" <[EMAIL PROTECTED]>
> To: "'Fowler, Joey '" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
> Sent: Thursday, Fe
PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Thursday, February 01, 2001 9:08 AM
Subject: Re: Ethernet switching
> In this scenario , it would also not matter what ip address you assigned
to
> the stations . ie: you could set one at 10.x.x.x /8 and the other at
> 192.x.x.x/28
lt;[EMAIL PROTECTED]>
>To: "Sheahan, Ryan" <[EMAIL PROTECTED]>,"'Fowler, Joey '"
><[EMAIL PROTECTED]>, <[EMAIL PROTECTED]>
>Subject: Re: Ethernet switching
>Date: Thu, 1 Feb 2001 09:08:09 +1300
>
>
>- Original Message -
>
ROTECTED]]On Behalf Of
Sheahan, Ryan
Sent: Wednesday, January 31, 2001 11:24 AM
To: 'Fowler, Joey '; '[EMAIL PROTECTED] '
Subject: RE: Ethernet switching
These are my thoughts,
If the switch was right out of the box, the stations could ping each
other
no matter what subnet mask y
gt;
>
>
>
>-Original Message-
>From: Fowler, Joey
>To: [EMAIL PROTECTED]
>Sent: 1/31/01 10:52 AM
>Subject: RE: Ethernet switching
>
>Depends on the subnet mask you are using, for instance
>
>142.102.3.1 with a subnet mask of 255.255.0.0
>142.102
Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Priscilla Oppenheimer
Sent: Wednesday, January 31, 2001 8:48 PM
To: [EMAIL PROTECTED]
Subject: RE: Ethernet switching
At 04:32 PM 1/31/01, Fred Danson wrote:
>Ok, now from my understanding, each port on a switch is its
I used cisco lan switching.
read the dense and sparse mode... and the conversion of multicast ip to its
layer 2 address
Fears Michael S SSgt 18 CS/SCBT <[EMAIL PROTECTED]> wrote in
message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I'm taking the switching exam soo
I would suggest getting your hands on the Switching Exam Cram book. I used
the BCMSN and this to prepare for mine. I found this book excellent for the
last week of craming before the exam. It's a more relaxed text and puts all
the pieces of the puzzle together nicely before the test. Good lu
I have just passed the Switching exam today. Yes, there are about 10
questions (of 64) - conceptual or CGMP related. I've got the lowest
scores on these sections (CGMP and multicast).
Fears Michael S SSgt 18 CS/SCBT wrote:
>
> I'm taking the switching exam soon. I
Are there other benchmarks for ACLs? I'm revisiting my config and
want it just so...
--- Brian Lodwick <[EMAIL PROTECTED]> wrote:
> I really enjoyed this link and appreciate your reply, for everyone
> else read
> through this article this link goes for a nice look at d
e read
>> through this article this link goes for a nice look at different
>> switching
>> types.
>> http://www.nwc.com/1004/1004ws2.html
>>
>>
>> >From: "Howard C. Berkowitz" <[EMAIL PROTECTED]>
>> >Reply-To: "Howard C
Spanning tree is supposed to choose the one best switched path. But if you
set up two equal cost paths, will it use both? Is there a way to force it
to use the bandwidth from both paths?
Thanks!
_
FAQ, list archives, and subscription info: http://www.groupstudy
congratulations
How much did they ask you on MLS?
from the sybex book, which chapters would you say are most important.
Thanks
"Gordon White" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Just passed switching with a 934...it see
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Oh, well...
Back to the drawling board. I will put the old software back on.
Paul
- Original Message -
From: "Priscilla Oppenheimer" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; "Paul Borghese" <[EMAIL PROTECTED]>
Sent: Monday, March 05, 200
You should know about the different switching types a router can handle for
the CIT test and for the real world and possibly other exams too. Below is
a copy and paste from Chapter 12 of Top-Down Network Design. The chapter
covers optimizing your network design.
One of the major jobs of a
thank you priscilla for your kindness
thanks a million
regards,
suaveguru
--- Priscilla Oppenheimer <[EMAIL PROTECTED]> wrote:
> You should know about the different switching types
> a router can handle for
> the CIT test and for the real world and possibly
> other exams
Hi Everyone
I was wondering if anyone out there has written the FRS Exam.
If so How difficult is it.
I have bought the Ver 1 Preparation Library and the Ver 2 Certification
Library.
Do you think this sufficient enough?
I will also be reading through Doyle's TCP/IP and Lan switching.
All
There is a fair amount.
""Steve Dangerfield ([EMAIL PROTECTED])""
<[EMAIL PROTECTED]>
wrote in message 002b01c05784$37fb75a0$0201010a@vaio">news:002b01c05784$37fb75a0$0201010a@vaio...
Hi All,
A quick Question, How much IP Multicasting
I just
took this test last week, know your Multicasting
Rob
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Steve Dangerfield
([EMAIL PROTECTED])Sent: Sunday, November 26, 2000 2:36
AMTo: [EMAIL PROTECTED]Subject: CCNP -
Switching
Title: Switching 2.0 test
Does anyone know of any good cramsessions/study notes for this test?
Mike Pickett
Enterprise Network Consultant
Worldcom
770-284-5844
Pager: 800-724-3624
Pin: 1684328
Title: switching test 2.0
has anyone used the testpage.net for this exam, they have free test posted here, but not sure how useful they are, i've got the boson test for it...
Mike Pickett
Enterprise Network Consultant
Worldcom
770-284-5844
Pager: 800-724-3624
Pin: 1684328
IL PROTECTED] [mailto:[EMAIL PROTECTED]]On
> Behalf Of Steve Dangerfield ([EMAIL PROTECTED])
> Sent: Sunday, November 26, 2000 2:36 AM
> To: [EMAIL PROTECTED]
> Subject: CCNP - Switching
>
> Hi All, A quick Question, How much IP Multicasting is there
>
Have anyone taken the CCNP Switching 2.0 test? If so are ther a lot of
multicasting questions on it? I'm using the Boson.com prep test and the
one from Jason asks a lot of multicast questions.
Thanks
Don Williams CCNA, MCSE
_
FAQ, list archives, and subscri
field [mailto:[EMAIL PROTECTED]]
Sent: Friday, December 01, 2000 7:14 AM
To: [EMAIL PROTECTED]
Subject: CCNP Switching
All,
Has anyone got a list of links to FREE example questions.
Steve
Steven Dangerfield, Network Engineer/Analyst
B.Eng, CCNA, CCSA
Email : [EMAIL PROTECTED]
Totalise - the
The sample Bosons are free but I would highly recommend paying for the full
version. It's a great test. It's difficult and cover more stuff than the
real exam but if you score pretty well on the Boson, you're almost
guaranteed to pass the exam in my opinion.
Steven Dangerfield <[EMAIL PROTECTED]>
Well, took the switching 2.0 today and passed it, I didn't think it was too
hard and about in line with Routing on difficulty. I think if you study the
course book and the know what's on the requirements from Cisco you will do
fine. I also used the LAN Switching book from the CCIE ser
Title: RE: Catalyst Sup IOS to Catalyst OS
Hello everyone:
Thank u everyone in this board for
sharing and with help of everyone I passed BCMSN yesterday with score of 797
which is not bad as I thoughtI failed exam in first hour. Overall, test was
bit wierd as wording forquestions were poorl
All,
Passed Switching 2.0 (890)=20
Used - Own practical knowledge, CLSC notes, Boson Tests.
The Boson tests are a lot harder than the real thing - but are very =
good, all the same.
Some questions were a bit tricky but if you read them carefully and =
eliminate silly answers it should be ok
Hey all,
Question:
1) On a router with multiple outbound paths, if fast switching (or CEF) =
is enabled and outbound traffic comes through towards a given =
destination, is all traffic for that same destination then locked to the =
same path untill the route cache is cleared?
2) If the above is
Hey all,
Question:
1) On a router with multiple outbound paths, if fast switching (or CEF) =
=3D
is enabled and outbound traffic comes through towards a given =3D
destination, is all traffic for that same destination then locked to the =
=3D
same path untill the route cache is cleared?
2) If
Hello all,
I am begining my studying for the switching exam and would like to know
the groups thought's on the best written study material.
Thanks in advance for your help
Tim
_
Get your FREE download of MSN Explorer at
It maps ALL MAC addresses learned on that port to that port. Not just one.
-Original Message-
From: Ken W. Alger [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 21, 2000 3:53 PM
To: [EMAIL PROTECTED]
Subject: Switching Question
My understanding of how most switches work is that
It learns all Mac Addresses originating from the hub to that port. It works
the same for uplink to another switch.
"Ken W. Alger" <[EMAIL PROTECTED]> wrote in message
91u20s$pk9$[EMAIL PROTECTED]">news:91u20s$pk9$[EMAIL PROTECTED]...
> My understanding of how most switches work is that one port i
Please be aware (even though I am in my Christmas drinks) the not all switches behave
the same. Some switch ports will only handle one (1) MAC address. These will only
ever talk to the first port that comes up on them.
Merry Christmas and or festive season to all.
Teunis
Hobart, Tasmania
Aus
"Ken W. Alger" wrote:
>
> My understanding of how most switches work is that one port is mapped to one
> MAC address, correct? If this is indeed true, what happens when you attach
> a hub to a switch port? I know that it is still functional, but what does
> the switch do for the additional hub
I passed the Switching 2.0(BCMSN). It was not very hard. If you read two
books or one book twice, you will pass the exam. and don't bother BOSON.
Boson is overkill for the exam. Have a firm understanding on foundational
concepts.
You don't have to dig deep to pass this exam.
VTP adv
I passed my switching 2.0 test yesterday, I was very pleased with the =
results. I did poorly exactly where I expected to do poorly, ip =
multicasting. My final score was 867/1000. In studying for the BCMSN I =
was able to rely heavily on the cisco press book and some on the job =
training. I
Hi, group.
I thought that if you use a Switch, e.g. 2924XL, each port gives you
dedicated line, and if you use a Hub all ports share the bandwidth. However
while playing with SnifferPro I can see all the traffic on the pure IP
network, including IPX/SAP, whereas if I connect Sniffer to a FastHub40
Are there any good books for the CCNA Wan switching exam? Is it a useful
cert in any case--ie are companies looking for it at all or even know it
exists? The exam outline looked pretty much like CCNA with some of the stuff
from CCNP thrown in but not much. Has anyone actually taken the test
t ten that you had to choose the right command.
MLS, HSRP, was not covered intensively.
No Rmon, ATM, LANE, DDR, QoS, and TAG switching. Even if it is in the
outline from Cisco.
I am no saying that there cannot be any question on these subjects but
rather that I did not get any.
I found the
://www.oledrews.com/ccnp
-Original Message-
From: Francisco Muniz [mailto:[EMAIL PROTECTED]]
Sent: Monday, September 25, 2000 11:18 AM
To: [EMAIL PROTECTED]
Subject: SWITCHING outline
Would anyone be so kind of sending me the index of the switching course
1 - 100 of 1124 matches
Mail list logo