Dave,
Get one with the FTDI chipset and you should be OK. There are others,
but do not buy one with the Prolific chipset.
73,
Don W3FPR
On 12/11/2022 5:27 PM, dave arruzza via Elecraft wrote:
To all: I believe my KUSB cable has gone bad due to a power failure
Since the power failure a red
To all: I believe my KUSB cable has gone bad due to a power failure
Since the power failure a red light is blinking from within the RS232 housing
and random dits are generated.
Is there a "over the counter" ie: Amazon etc. equivalent.
73 Dave W1CTN
$20 Paypal.
Carl Yaffey K8NU
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.bluesswing.com
http://www.timbrewolvesband.com
http://www.folkramblers.carl-yaffey.com
Http://www.clintonvillegrass.com
__
Elecraft mailing
New KUSB cable. $30. CONUS only, Paypal.
73
Carl Yaffey K8NU
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.bluesswing.com
http://www.timbrewolvesband.com
http://www.folkramblers.carl-yaffey.com
Http://www.clintonvillegrass.com
Sabrent USB 2.0 to Serial (9-Pin)...
https://www.amazon.com/dp/B006AA04K0?ref=ppx_pop_mob_ap_share
This one works great with my k3
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I must have lost my KUSB cable to connect my KPA 500 to a computer for
remote control (9pin male to USB). I have many KXUSB cables. dose anyone
have an extra to either sell or trade?
Howard AE3T
__
Elecraft mailing list
Home:
Hello Elecrafter’s. Do any of you have a spare KUSB cable that they would like
to sell me? I have gone through all my accessory drawers, behind my desk, and
equipment boxes. I cannot program any of my K-line without it! Tnx and best
73. Len
But K3S has direct USB, no need for KUSB which is a USB to Serial converter.
Sent from my iPhone
...nr4c. bill
> On Jun 3, 2017, at 11:44 PM, Clay Autery wrote:
>
> Connecting a USB-only computer (laptops especially) to the radio would
> be my SWAG...
>
>
Connecting a USB-only computer (laptops especially) to the radio would
be my SWAG...
__
Clay Autery, KY5G
On 6/3/2017 9:43 PM, j...@kk9a.com wrote:
> Why do you normally use a KUSB with a K3S?
>
> John KK9A
>
> From: Roman Brandau
> Sat Jun 3 21:03:15 EDT 2017
>
> Thanks for
Why do you normally use a KUSB with a K3S?
John KK9A
From: Roman Brandau
Sat Jun 3 21:03:15 EDT 2017
Thanks for the quick replies. Sorry I forgot to mention I'm using a K3s.
Roman Brandau
Sent from my iPhone
>
>> On 6/3/2017 7:25 PM, Roman Brandau wrote:
>> I'm on a mini DXPedition and left
Thanks for the quick replies. Sorry I forgot to mention I'm using a K3s.
Thanks, Don.
Roman Brandau
Sent from my iPhone
> On Jun 3, 2017, at 19:45, Don Wilhelm wrote:
>
> Roman,
>
> You did not say which transceiver you have, so I will try to give you the
> full
What radio?
Sent from my iPhone
...nr4c. bill
> On Jun 3, 2017, at 7:25 PM, Roman Brandau wrote:
>
> I'm on a mini DXPedition and left my KUSB at home. Can a regular USB A-B
> cable be used? I'm guessing no...
>
> Roman Brandau
> WU8R
> Sent from my iPhone
>
Roman,
You did not say which transceiver you have, so I will try to give you
the full answer.
If you have the K3S or a K3 with the updated KIO3B (with a USB input),
then the answer is yes. Plug the cable between your USB port and the K3S.
But the KUSB implies that it is a USB to serial
I'm on a mini DXPedition and left my KUSB at home. Can a regular USB A-B cable
be used? I'm guessing no...
Roman Brandau
WU8R
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
t@mailman.qth.net"
<Elecraft@mailman.qth.net>
Sent: Sunday, January 8, 2017 1:18 PM
Subject: Re: [Elecraft] KUSB Drivers for Windows 10
Hello Pete and All
Windows 10, does an automatic update on the original driver. This will not work
with the old Profilic cable.
There is a fix f
still use the same cable purchased in 2008 with my K3 with Windows 10.
73 de Dick PA3FQA
-Oorspronkelijk bericht-
Van: Elecraft [mailto:elecraft-boun...@mailman.qth.net] Namens Peter Chamalian
Verzonden: zondag 8 januari 2017 20:01
Aan: Elecraft@mailman.qth.net
Onderwerp: [Elecraft] KUSB
I have a KUSB that I purchased in April 2010. It works just fine with a
windows 7. On 7, the driver is provided by prolific version 3..3.2.102. On
windows 10 the system installed Prolific version 3.8.3.0
On Windows 10, the system manager is giving me the error not enough quota,
not enough
If windows isn't finding the device you may have to install the driver
manually. No big deal.
Download the driver from Elecraft onto a thumb drive. Browse to the file
on the thumb drive and run the setup. Follow the instructions. Once
installed, possibly after a reboot, plug the device in a
I'm no expert but after having trouble with another device with an FTDI USB to
Serial chip in it, I found that I needed to manually install the Virtual Com
Port (VCP) driver. I believe that this driver used to come separately but is
now part of a package from FTDI and requires checking a box
I have no idea. It is a KUSB I just bought recently from Elecraft.
When I plugged it in, it wasn't recognized, new device found, etc. I thought
the driver would be there, like so many are, but no.
Is there a secret to plugging things in? I turned the machine off, plugged it
in and restarted
Jim,
You can download the FTDI driver from
http://www.ftdichip.com/Drivers/VCP.htm.
Yes, you can put it on a thumb drive and install it on your Win10
machine with no internet connection.
73,
Don W3FPR
On 11/27/2016 6:35 PM, Jim Allen wrote:
What driver do I need for the KUSB device? I
All my WIN10 machines had no issue with drivers for FTDI devices.
Is yours an older Prolific KUSB?
Sent from my iPhone
...nr4c. bill
> On Nov 27, 2016, at 6:35 PM, Jim Allen wrote:
>
> What driver do I need for the KUSB device? I have a K2 and am connecting it
> to a
What driver do I need for the KUSB device? I have a K2 and am connecting it to
a W10 machine that has no internet connection. Where would I get it? Can I
put it on a thumb drive and copy it onto the W10 machine? Where should it go
on that device?
TIA.
73 Jim Allen W6OGC
Sent from my iPad
Anyone have a KUSB with the FTDI chipset that they would like to sell?
Please contact me off list at n...@arrl.net. Thanks. 73, Greg
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Mine works fine.
Gary
-Original Message-
From: "Jack Colson" <jcols...@tampabay.rr.com>
Sent: 9/09/2015 4:05 AM
To: "Elecraft@mailman.qth.net" <Elecraft@mailman.qth.net>
Subject: [Elecraft] KUSB and Windows 10 driver ?
I have an original KUSB whic
I have an original KUSB which uses the Prolific driver, what driver must I get
for to be compatible with Windows 10?
73 and thank you,
Jack, W3TMZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Hi, Lisa --
I've been using the various Elecraft rigs and
accessories (K3, KX3, P3, KPA500, KAT500) with a
Windows 8.1 computer starting in March of this
year. I believe I'm using only Elecraft-provided
FTDI USB-RS232 converters (there may be one in the
mix from Amazon, also FTDI) and I've
Good afternoon (it's Sunday afternoon and 35 degrees C here)
Please see my email below - panic over !!
I trawled through the websites of various local computer and electronics
suppliers and found that Jaycar - a big Australian electronic parts
retailer with lots of branches - apparently had a
To: Elecraft Reflector
Subject: [Elecraft] KUSB - non radio question
I need to use my wife's computer in the NAQP CW, mine is in the hospital for
a fan transplant.
How do I get XP to recognize the KUSB [mine is somewhat old, I think it's
Prolific]. I've downloaded both FTDI and Prolific drivers
The method that I use takes a few minutes. You plug in the USB dongle then
via the device manager TELL the system what port to assign to it. Then you
move the dongle to another USB port and do the same thing until all USB
ports have been used. So no matter what port you plug that dongle into,
I need to use my wife's computer in the NAQP CW, mine is in the hospital
for a fan transplant.
How do I get XP to recognize the KUSB [mine is somewhat old, I think
it's Prolific]. I've downloaded both FTDI and Prolific drivers from
Elecraft, they seem to install, but I don't see any Ports in
I don't see mentioned if you have the KUSB plugged in when you are looking
for the ports.
Dick, n0ce
-Original Message-
From: Fred Jensen
Sent: Friday, August 02, 2013 9:35 PM
To: Elecraft Reflector
Subject: [Elecraft] KUSB - non radio question
I need to use my wife's computer
what port is assigned.
GL!
Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Fred Jensen
Sent: Friday, August 02, 2013 19:35 PM
To: Elecraft Reflector
Subject: [Elecraft] KUSB - non radio question
I need to use my
-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Fred Jensen
Sent: Friday, August 02, 2013 10:35 PM
To: Elecraft Reflector
Subject: [Elecraft] KUSB - non radio question
I need to use my wife's computer in the NAQP CW, mine is in the hospital for
a fan transplant.
How do
This is a new KUSB, a spare that I don't need. It has the FTDI Chipset. For
sale, delivered for $30. Shipping is included. 73AlanW1HYV
__
Elecraft mailing list
Home:
Thanks Mike.
Interesting article.
73
John
On 13/12/2012 22:52, Mike Harris wrote:
A few years ago I was receiving noise from my PC on 6M, via the serial
interface cable. I was also receiving it when using the KUSB of the
time with the Prolific chip-set.
I made a new serial cable using
Hi Folks,
I posted a query about K3 Serial ports a few months back - we could not
get the K3 to work properly with the RS232 connection. It turned out to
be a fault with the sound card, which took out the serial connections.
When I first built the K3, I bought a cheap Prolific USB converter,
which
, December 13, 2012 9:25 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KUSB Noise Query - K3
Hi Folks,
I posted a query about K3 Serial ports a few months back - we could not get the
K3 to work properly with the RS232 connection. It turned out to be a fault with
the sound card, which took out
@mailman.qth.net
Sent: Thursday, December 13, 2012 9:53 AM
Subject: Re: [Elecraft] KUSB Noise Query - K3
USB uses differential signaling. Your problem may not be conductive noise, but
instead it could be radiated directly from the adapter, where the ferrite won't
help.
KeySpan makes a USB - serial adapter
Sent: Thursday, December 13, 2012 12:10 PM
Subject: Re: [Elecraft] KUSB Noise Query - K3
You may try a different K-USB. I have a K-USB that radiated terrible noise on
160m. A different one, quiet.
-Brian N9ADG
From: Matthew Zilmer mzil...@magellangps.com
:* Thursday, December 13, 2012 9:53 AM
*Subject:* Re: [Elecraft] KUSB Noise Query - K3
USB uses differential signaling. Your problem may not be conductive
noise, but instead it could be radiated directly from the adapter, where
the ferrite won't help.
KeySpan makes a USB - serial adapter
: [Elecraft] KUSB Noise Query - K3
Hi Folks,
I posted a query about K3 Serial ports a few months back - we could not get the
K3 to work properly with the RS232 connection. It turned out to be a fault with
the sound card, which took out the serial connections.
When I first built the K3, I bought a cheap
] On Behalf Of john petters
Sent: Thursday, December 13, 2012 9:25 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KUSB Noise Query - K3
Hi Folks,
I posted a query about K3 Serial ports a few months back - we could
not get the K3 to work properly with the RS232 connection. It turned
out
A few years ago I was receiving noise from my PC on 6M, via the serial
interface cable. I was also receiving it when using the KUSB of the
time with the Prolific chip-set.
I made a new serial cable using CAT-6 and the technique used in the
K9YC RFI-Ham.pdf tutorial, page 38.
This
I have a KUSB made right around the time the design switched from
Prolific to FTDI. It has a Prolific PL2303HXA chipset in the cable.
This particular chipset is not compatible with Windows 8 as clearly
stated by the OEM in their driver readme file. The FTDI website doesn't
say anything
Somehow or other, yours truly ordered an extra one of these and as I only
need one, this one is available. If anyone needs this cable, I have one for
sale for $20 including shipment to be sent to you in any of the 50 states
via U.S. Mail. You will need to download the appropriate drivers as
On 9/24/2012 11:31 AM, Barry Pfeil wrote:
If you are using the Elecraft KUSB USB-serial converter with Windows 7
and
recent N1MM (12.9.1), please let me know. Using my Keyspan USA-19HS
adapter (yes, latest drivers) I'm getting blue screen crashes on
Windows
7. All N1MM settings are the same
...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Brian Hunt
Sent: Tuesday, 25 September 2012 10:54 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KUSB users, please help.
I'm using Windows 7 on an HP p7-1210, N1MM logger 12.8.0 and a Star-Tech.com
ICUSB232 which I
If you are using the Elecraft KUSB USB-serial converter with Windows 7 and
recent N1MM (12.9.1), please let me know. Using my Keyspan USA-19HS
adapter (yes, latest drivers) I'm getting blue screen crashes on Windows
7. All N1MM settings are the same as I use OK under XP so I see the KUSB
: Tuesday, 25 September 2012 4:31 AM
To: Elecraft Reflector
Subject: [Elecraft] KUSB users, please help.
If you are using the Elecraft KUSB USB-serial converter with Windows 7 and
recent N1MM (12.9.1), please let me know. Using my Keyspan USA-19HS adapter
(yes, latest drivers) I'm getting blue screen
to work. I finally concluded that there were no
drivers, Prolific or OEM that were going to work with Win 7.
Brian, K0DTJ
On 9/24/2012 11:31 AM, Barry Pfeil wrote:
If you are using the Elecraft KUSB USB-serial converter with Windows 7 and
recent N1MM (12.9.1), please let me know. Using my Keyspan
Pfeil wrote:
If you are using the Elecraft KUSB USB-serial converter with Windows 7 and
recent N1MM (12.9.1), please let me know. Using my Keyspan USA-19HS
adapter (yes, latest drivers) I'm getting blue screen crashes on Windows
7. All N1MM settings are the same as I use OK under XP so I see
Does anyone have experience with the subject combination? I just tried
using a newly-purchased version of my trusty old Keyspan USA-19HS and it
crashes Windows 7 (blue screen) when I try to TX with F1. Worked fine with
XP. I'll order KUSB if I get OK reports here. TIA!
73, Barry, K6RM
I had the damnest time getting my K2 and usb converter to work. Check all
params baud rates, com port #'s and nothing. Blue screen of death is
usually caused by a wrong chip set. Update drivers make sure you are using
FTDI chip set. This is my advise, but more info needed such as rig, brand
Thanks, Gerald. Apparently the Keyspan uses a TI chipset and I did try
their latest drivers. BTW, I have a K3 (connected via P3) on the serial
cable.
Barry K6RM
On Sat, Sep 22, 2012 at 10:47 AM, Gerald Manthey kc6...@gmail.com wrote:
I had the damnest time getting my K2 and usb converter to
El 12/03/11 09:36, Pierfrancesco Caci escribió:
Anyone with a KUSB using it with linux out there? Can you show me the
output of 'sudo lsusb -v' please? I'm specifically interested to know if
the iManufacturer, iProduct and iSerial fields are set to something
useful.
Thanks
Pf, ik5pvx
Anyone with a KUSB using it with linux out there? Can you show me the
output of 'sudo lsusb -v' please? I'm specifically interested to know if
the iManufacturer, iProduct and iSerial fields are set to something
useful.
Thanks
Pf, ik5pvx
--
Pierfrancesco Caci
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft KUSB
Bill W4ZV wrote:
Does anyone know the cable length of the most recent adapter (using the
FTDI chipset)?
6' is the answer. Another question...has anyone had problems with the
Elecraft KUSB and XP? I got one
Does anyone know the cable length of the most recent adapter (using the FTDI
chipset)?
73, Bill
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Elecraft-KUSB-tp6000201p6000201.html
Sent from the Elecraft mailing list archive at Nabble.com
Bill W4ZV wrote:
Does anyone know the cable length of the most recent adapter (using the
FTDI chipset)?
6' is the answer. Another question...has anyone had problems with the
Elecraft KUSB and XP? I got one report of problems with Win7.
73, Bill
--
View this message in context:
http
I use win7 74 bit with it and absolutely no problems.
Bill
K9YEQ
-Original Message-
Bill W4ZV wrote:
Does anyone know the cable length of the most recent adapter (using
the FTDI chipset)?
6' is the answer. Another question...has anyone had problems with the
Elecraft KUSB
anyone know the cable length of the most recent adapter (using
the FTDI chipset)?
6' is the answer. Another question...has anyone had problems with the
Elecraft KUSB and XP? I got one report of problems with Win7.
73, Bill
NO9E wrote, Unfortunately they do not come back from hibernation like KUSB
does.
You can tell a used root hub not to disable. Go to manage devices, find the usb
device, control power management.
Ted
__
Elecraft mailing list
Home:
Eric Swartz WA6HHQ - Elecraft wrote:
All KUSB usb to serial adapters currently sold by Elecraft use the FTDI
chipset. this is noted directly on the KUSB order line on our order page.
Yes, but what's a bit confusing is that the link to the USB drivers on the
K3 software page still tries
Probably because some will need to get updated Prolific drivers. It
would be good if the webpage had links to BOTH, and explained how to
determine which USB cable you had, so you knew which link to use. It
would also be good to list the date that Elecraft started shipping the
new version.
73,
Guy, K2AV wrote:
Probably because some will need to get updated Prolific drivers. It
would be good if the webpage had links to BOTH, and explained how to
determine which USB cable you had, so you knew which link to use. It
would also be good to list the date that Elecraft started
it examine device drivers versions.
Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Stan Gibbs
Sent: Thursday, September 09, 2010 12:52 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KUSB(Prolific
I don't think Elecraft produces the cable.
FTDI available at
http://www.usbgear.com/USB-Serial.html
73, Mike NF4L
On 9/7/2010 9:59 PM, Jim Miller wrote:
I think I read somewhere that Elecraft had switched KUSB production to one
based on FTDI. I'm having fits on Win7-64 keeping my notebook
Jim AB3CV wrote:
I think I read somewhere that Elecraft had switched KUSB production to one
based on FTDI. I'm having fits on Win7-64 keeping my notebook stable with
the Prolific based KUSB.
I couldn't find any mention of an FTDI based device on the Elecraft site.
The driver for
All KUSB usb to serial adapters currently sold by Elecraft use the FTDI
chipset. this is noted directly on the KUSB order line on our order page.
73,
Eric
www.elecraft.com
_..._
On Sep 8, 2010, at 2:58 AM, Mike n...@nf4l.com wrote:
I don't think Elecraft produces the cable.
FTDI
I think I read somewhere that Elecraft had switched KUSB production to one
based on FTDI. I'm having fits on Win7-64 keeping my notebook stable with
the Prolific based KUSB.
I couldn't find any mention of an FTDI based device on the Elecraft site.
The driver for download there is still the v1.1
I've just upgraded to a new computer with no serial ports so I need to be
able to update the firmware in my K3. I know the KUSB is available and from
what I read, it's a usb to serial cable to enable direct communication
between computer and radio.
I'm running Windows 7, 64-bit computer.
Been right down that road. I have the KUSB.
Prolific has a 4/12/2010 dated installer.zip at
http://www.prolific.com.tw/support/files/%5CIO%20Cable%5CPL-2303%5CDrivers%20-%20Generic%5CWindows%5Callinone%5CPL2303_Prolific_DriverInstaller_v1210.zip
Prolific drivers for Windows7/64 have been
Hi Everybody;
As the KUSB discussion thread continues on, I'd like to suggest an
alternative.
All motherboards, except 40 year old ones, sport a PCIE port or two. There
exists a whole
bunch of converter cards that ride the PCIe bus and convert to serial ports,
parallel ports, printer ports
and
...never a USB problem again!
Actually, I don't think there are USB problems. USB is a very good standard
that supports a large variety of devices and configurations. The specification
allows for simple point-to-point interface as well as hub/hosting, device
sharing, and a number of other
Hystad
Sent: Sunday, November 22, 2009 11:54 AM
To: Elecraft
Subject: Re: [Elecraft] KUSB Adapter Alternative
...never a USB problem again!
Actually, I don't think there are USB problems. USB is a
very good standard that supports a large variety of devices
and configurations
I've been experimenting with a serial server that resides on the LAN
here:
http://www.serialgear.com/Ethernet-Serial-Servers-NETCOM-411.html.
It's a 4-port and can handle any baud rate needed.
I've had no problems with the server, but it's not as fast as the KUSB
even with the cascaded hubs here.
Joe Subich, W4TV-4 wrote:
USB is good technology and it only needs a few little
improvements in future revisions to specifications.
With its plug and play features, USB is very handy for consumer
toys and games but it is severely lacking in many other ways.
Joe is absolutely
Interesting comments...
I have never had any problems with any USB device over the years. I might add
that
I have only used two devices with my ham radio gear and they are both microHam
products which Joe knows all about. Other USB devices I have used have always
been designed for the
Phil Hystad wrote:
But, I think the comment below, if I understand the point being made, is
that a
problem with USB is in emulating a serial port on a computer or a serial
device.
I agree with that, I think that the day that USB stops trying to emulate
some old
technology we would
Let's wind this thread down today. We've passed the max post qty
threshold ;-)
73,Eric WA6HHQ
Elecraft List Moderator
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Phil Hystad wrote:
So, I am putting my vote in on a future option to integrate a built-in USB
port instead of, or in addition to, the serial port. I understand that
there are still quite a few ham operators that operate with yesterday's
computer technology and may not even have USB
julian.g4...@gmail.com
To: elecraft@mailman.qth.net
Sent: Saturday, November 21, 2009 3:38 AM
Subject: Re: [Elecraft] KUSB Adaptor
Phil Hystad wrote:
So, I am putting my vote in on a future option to integrate a built-in
USB
port instead of, or in addition to, the serial port. I understand
David Y. wrote:
I'm really a complete neophyte at this sort of stuff, but isn't it mainly
a
matter of having the correct drivers? If a device isn't recognized when
using a new operating system, it's usually just a matter of getting new
drivers. Unfortunately, some manufacturers
Julian said, is
there any advantage to using a plain USB cable instead a USB cable with a bulge
on the end? :-)
David, W4SMT
--- On Sat, 11/21/09, Julian, G4ILO julian.g4...@gmail.com wrote:
From: Julian, G4ILO julian.g4...@gmail.com
Subject: Re: [Elecraft] KUSB Adaptor
To: elecraft
David Fleming wrote:
But, like Julian said, is there any advantage to using a plain USB cable
instead a USB cable with a bulge on the end? :-)
There could be, if Elecraft supported it. USB 2.0 has enough bandwidth
to support a software band scope...
73, Ross N4RP
--
FCC Section
noticed that Yaesu has
a new radio called the FT5000, it looks like a FT2000 and it probably has the
same crap receiver. Its ergonomics look good though.
John
--- On Sat, 11/21/09, Ross Primrose n...@aiko.com wrote:
From: Ross Primrose n...@aiko.com
Subject: Re: [Elecraft] KUSB Adaptor
I use an rs-232 to usb adapter with cabel between my K3 and pc and this
works perfekt in my schak.
Driver for this usb adapter is prolific USB-to-Serial Bridge...i buy this at
Claes Ohlsson here in Norway.
My direct rs 232 cabel from K3 to computer worked nice before i put my PA in
work...1Kw at
Uhhh forgot to tell my computer is an Asus motherboard P5E-VM DO with 2core
intel cpu with XP service pc-3. 2 Gig ram and lot of HDD :-)
73 de Lars M LA2RRA
--
View this message in context:
http://n2.nabble.com/KUSB-Adaptor-tp4038971p4044981.html
Sent from the Elecraft mailing list archive
Why doesn't the design team at Elecraft incorporate a USB port on the back
of the K3 instead of the outdated serial port? They could offer a kit that
would use the hole that is now labeled RS232. There might be room for 2 USB
ports or mini ports.
Bob Maser
W6TR (waiting for Elecraft to repair
Actually, I was confused about the KUSB option. I actually thought it was a
built-in USB port and when I learned it was merely a serial to USB connector
and cable I then scratched the KUSB off of my budding proposed configuration.
This is because I have a number of such serial to USB cables
Usb can be a noisy thing, there are many reasons you wouldnt want it
inside the radio Not to mention the exercise in writing drivers
alone is herculean.
Matt
W8ESE
On Fri, Nov 20, 2009 at 12:41 PM, Phil Hystad k7...@comcast.net wrote:
Actually, I was confused about the KUSB option. I
Bob Maser wrote:
Why doesn't the design team at Elecraft incorporate a USB port on
the back
of the K3 instead of the outdated serial port? They could offer a
kit that
would use the hole that is now labeled RS232. There might be room
for 2 USB
ports or mini ports.
Hi Bob,
Many ham
I don't think writing the drivers is a herculean task but then I used to do
that back when drivers did everything (such as mag tape equipment from the
1960s era where microprocessors did not exist and everything was controlled by
the software interrupt level driver).
Chip level drivers and USB
On Fri, Nov 20, 2009 at 10:44 AM, Matt Palmer kd8...@gmail.com wrote:
inside the radio Not to mention the exercise in writing drivers
alone is herculean.
Not if you use the FTDI parts. *They* write the system driver, and
supply a complete driver package for 32 and 64 bit Windows. All the
the
culprit.
Dave W7AQK
- Original Message -
From: Phil Hystad k7...@comcast.net
To: Bob Maser bmas...@q.com
Cc: Elecraft elecraft@mailman.qth.net
Sent: Friday, November 20, 2009 10:41 AM
Subject: Re: [Elecraft] KUSB Adaptor
Actually, I was confused about the KUSB option. I actually
...@cox.net
To: k7...@comcast.net; bmas...@q.com
Date: Fri, 20 Nov 2009 18:39:56 -0700
CC: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KUSB Adaptor
I suspect many of us have had a USB adapter that didn't seem to cooperate at
one time or the other. I have one that doesn't seem to work
May as well wait for USB 3.0...
On Fri, Nov 20, 2009 at 12:57 PM, Wayne Burdick n...@elecraft.com wrote:
Bob Maser wrote:
Why doesn't the design team at Elecraft incorporate a USB port on
the back
of the K3 instead of the outdated serial port? They could offer a
kit that
would use
On Nov 20, 2009, at 9:53 PM, S Sacco wrote:
May as well wait for USB 3.0...
Or go straight to ethernet (notwithstanding the RF garbage generated from
bad ethernet design and shielding)
Bill
W4ISH
__
Elecraft mailing list
Home:
Hi.
I converted two of my computers to Windows 7 this week end. I found I
had to use a new
driver on the KUSB (Universal Serial Bus Adapter) for the K3.
It is Prolific, Driver Date 7/17/2009, Driver Version 3.3.5.122. I
transfered the new
software to the K3 using the new Elecraft K3 utility. I
1 - 100 of 183 matches
Mail list logo