Latency is the reason we have not yet enabled working over a VPN, but not
the reason it doesn't work. We use a protocol that generally does not
cross a VPN (on purpose). If you know what you are doing with networks, it
can be made to work, but unless you have a low latency network (most home
-Original Message-
From: Flexedge [mailto:flexedge-boun...@flex-radio.biz] On Behalf Of
Richard Clafton
Sent: 05 June 2013 13:48
To: Bob Kay; k8...@aol.com
Cc: flexe...@flex-radio.biz; flexradio@flex-radio.biz
Subject: Re: [FlexEdge] [Flexradio] Update on FlexRadio 6700 on air
mobile wireless
Original message
From: Stu Phillips s...@ridgelift.com
Date: 06/05/2013 11:34 AM (GMT-08:00)
To: Bob Kay wa2...@gmail.com,k8...@aol.com
Cc: flexe...@flex-radio.biz,flexradio@flex-radio.biz
Subject: Re: [Flexradio] Update on FlexRadio 6700 on air
From what I'm reading, this describes a wired remote operation. Can the new
flex radios be accessed truly remotely, via an Internet connection?
On Tuesday, June 4, 2013, wrote:
Stu,
Happy to see I made your blog. You sounded great with your FLEX 6700 and
KW. I was running barefoot with my
Message-
From: Bob Kay wa2...@gmail.com
Sent: 6/5/2013 8:30 AM
To: k8...@aol.com k8...@aol.com
Cc: flexe...@flex-radio.biz flexe...@flex-radio.biz;
flexradio@flex-radio.biz flexradio@flex-radio.biz
Subject: Re: [Flexradio] Update on FlexRadio 6700 on air experience
From what I'm reading
-radio.bizmailto:flexradio@flex-radio.biz, Flex Edge
flexe...@flex-radio.bizmailto:flexe...@flex-radio.biz
Subject: Re: [Flexradio] Update on FlexRadio 6700 on air experience
From what I'm reading, this describes a wired remote operation. Can the new
flex radios be accessed truly remotely, via
11:34 AM (GMT-08:00)
To: Bob Kay wa2...@gmail.com,k8...@aol.com
Cc: flexe...@flex-radio.biz,flexradio@flex-radio.biz
Subject: Re: [Flexradio] Update on FlexRadio 6700 on air experience
This is indeed a wired remote operation. As Tim has already follow up,
Internet operation is both possible
: Re: [Flexradio] Update on FlexRadio 6700 on air experience
This is indeed a wired remote operation. As Tim has already follow up,
Internet operation is both possible and a future enhancement for SmartSDR
and the 6000 series.
NOTE: I do operate this lot remotely using Skype or RemAud
Folks,
Updated my blog this am with my latest on-air experiences with the FlexRadio
6700.
http://bit.ly/18LFNl4
73 and enjoy!
Stu K6TU
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Stu,
Happy to see I made your blog. You sounded great with your FLEX 6700 and
KW. I was running barefoot with my FLEX 5000. It appears you didn't have
to work too hard to hear me. Next time I'll put the big AMP on.
73,
Bob
K8MLM
In a message dated 6/4/2013 1:51:31 P.M. Eastern
I'm running 2.2.3 do I need to update all versions 2.3.5, 2.4.4 up to the
current 2.3.5 or can I just upgrade to the current version 2.3.5 ??
73-
W1JCW
John
From: Tim Ellison, W4TME mailto:t...@flex-radio.com
Sent: Monday, December 10, 2012 7:05 AM
To: Flex Radio
Just install 2.5.3, it is all inclusive.
Tim Ellison
On 12/13/2012 9:36 AM, W1JCW wrote:
I'm running 2.2.3 do I need to update all versions 2.3.5, 2.4.4 up to the
current 2.3.5 or can I just upgrade to the current version 2.3.5 ??
73-
W1JCW
John
From: Tim Ellison, W4TME
So the only thing I should do is export the database and run the 235.exe ?
Thanks
John
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim
Ellison
Sent: Thursday, December 13, 2012 9:06 AM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim
Ellison
Sent: Thursday, December 13, 2012 9:06 AM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Update all previous versions before PowerSDR v2.5.3
??
Just install 2.5.3, it is all inclusive.
Tim Ellison
On 12/13/2012 9:36 AM, W1JCW wrote
No, you do not. Every version of PowerSDR is 100% independent of the
previous versions and the latest version is all inclusive.
Tim Ellison
On 12/11/2012 5:24 PM, W1JCW wrote:
Guys -
If I'm running 2.2.3 do I need to update all previous 2.3.5, 2.4.4 versions up
to the current 2.3.5 or can I
With PowerSDR v2.4.4 and greater, this feature has been removed. You
can uninstall previous version of PowerSDR and the skins do not
disappear any more.
Tim Ellison
On 12/12/2012 10:56 AM, Neal Campbell wrote:
With the exception of the skins folder (ie, if you uninstall a
previous version
Guys -
If I'm running 2.2.3 do I need to update all previous 2.3.5, 2.4.4 versions up
to the current 2.3.5 or can I just upgrade to the current version 2.3.5 ??
73-
W1JCW
John
From: Tim Ellison, W4TME
Sent: Monday, December 10, 2012 7:05 AM
To: Flex Radio
Subject: [Flexradio] PowerSDR
Johnnie,
This looks to be a Fldigi interaction with you Firewall software. I
think it is a false positive if you are downloading it from the same
place you have always downloaded Fldigi from.
Tim Ellison
On 6/18/2012 10:45 AM, ATT Online Services wrote:
I tried to update Fldigi with
I tried to update Fldigi with 3.21.45, but got a red warning that it could harm
my computer, delete it.
what's up.
Johnnie w6hty
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
So today I uninstalled VAC, rebooted and reinstalled it. Strangly I did not
have to put my settings back in op VAC.
Then I uninstalled PSDR and the Firewire driver and reinstalled those with a
fresh download from the Flex site. I also removed a lot of old Flex files and
directories.
After
Has there been an update I missed? I understood at last a sample radio had been
received by the toolkit vendor but missed any subsequent updates.
Thanks,
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
.The latest
official update is on the home page of the web site.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of David Feldman
Sent: Friday, October 01, 2010 1:15 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio
David,
The custom USB driver is fully functional in our lab in 64-bit mode. The
DDK vendor promised to send us the 32-bit version next week. We then have
to do the full integration into PowerSDR and the installer. Once that has
been completed it will go to our alpha testers. If they find no
I have made good progress getting the 1500 operational on CW and SSB. The
most important setting was the audio buffer size to at least 1024, and 2048
works even better.
VAC to get audio out the computer speakers does not work very well. On CW
either the keyboard function of PowerSDR or an
-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mike WA8BXN
Sent: Saturday, July 24, 2010 11:19 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Update: Acer netbook the 1500
I have made good progress getting the 1500 operational on CW and SSB. The
most important
-
From: Larry Rappaport [mailto:r...@lmr.com]
Sent: Friday, June 18, 2010 2:31 PM
To: n...@gokarns.com
Subject: RE: [Flexradio] update?
Thank you. I was just about to buy their big vertical to be followed by
their 4 element beam. Not now. I have been spoiled by Flex and DXLab -
their service
Subject: Re: [Flexradio] update?
Hi Kevin
You must have missed the exchanges a couple of weeks ago with a few users
proclaiming loss of faith (and worse) at the plans that Gerald would
frequently make to the user community. He has gotten bitten several times by
these few and after
Well boys and girls, looks like I started this by asking when to expect the
update... sorry about that. I can add that I would prefer to wait than rush
into something that is not ready. i was one of the first users of the
ftdx9000d. Yaesu released it way to early trying to catch up with the
On Wed, Jun 16, 2010 at 2:34 AM, wa5...@aol.com wrote:
How many of you have been to their Austin, Texas offices?? Having been
there personally, I can tell you it is an underwhelming experience.? It
AIN'T FANCY.? Waddyreckon it's because they're devoted to making -?no
-?EVOLVING - cutting edge
...@aol.com
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] update? INTEGRITY
On Wed, Jun 16, 2010 at 2:34 AM, wa5...@aol.com wrote:
How many of you have been to their Austin, Texas offices?? Having been
there personally, I can tell you it is an underwhelming experience.? It
AIN'T FANCY
i have no problem waiting. 73 paul w8jn
On Wed Jun 16th, 2010 7:41 AM EDT Brian Lloyd wrote:
On Wed, Jun 16, 2010 at 2:34 AM, wa5...@aol.com wrote:
How many of you have been to their Austin, Texas offices?? Having been
there personally, I can tell you it is an underwhelming experience.? It
Hi Kevin
I don't think these voices of support are directed towards you in any way.
You asked the question many of us want to ask but are not so the boys can
get on with it. But we still want to know!
We got a note from Gerald indicating they were alive, well and burning the
midnight oil. Thats
-radio.biz
Subject: Re: [Flexradio] update? INTEGRITY
Hi Kevin
I don't think these voices of support are directed towards you in any way.
You asked the question many of us want to ask but are not so the boys can
get on with it. But we still want to know!
We got a note from Gerald indicating they were
At any OTHER mfg can you get similar access to anyone who actually,
sincerely, gives a big fuzzy about your concerns?
I will take honest errors in forecast dates over the usual BS we would get
elsewhere.
Flex is made in USA and I have NEVER had any interaction with ANY of their
personnel,
Subject: Re: [Flexradio] update?
FlexRadio has stopped making forward looking announcements related to ship
dates for hardware and software products, so you are not going to hear
anything until products are actually shipping.
When the FLEX-VU5K and the FLEX-1500 become fully available
...@netcommander.com
To: flexradio@flex-radio.biz
Sent: Wednesday, June 16, 2010 2:21 PM
Subject: Re: [Flexradio] update?
You know I can understand someone being miffed at how long a preorder
takes if they were actually charged for the merchandise at the time of
preorder but Flex doesn't do that. Common sense
-boun...@flex-radio.biz] On Behalf Of Michael Tondee
Sent: Wednesday, June 16, 2010 3:22 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] update?
You know I can understand someone being miffed at how long a preorder
takes if they were actually charged for the merchandise at the time
Dudley, Anybody?? hihi Is there an update when we will be shipping back to
the factory for the 2 mtr 70 cnt install
Best 73 Paul w8jn
___
FlexRadio Systems Mailing List
-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of paul glassman
Sent: Tuesday, June 15, 2010 7:50 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] update?
Dudley, Anybody?? hihi Is there an update when we will be shipping back to
the factory for the 2 mtr 70 cnt install
...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison
Sent: Tuesday, June 15, 2010 8:43 PM
To: paul glassman; flexradio@flex-radio.biz
Subject: Re: [Flexradio] update?
FlexRadio has stopped making forward looking announcements related to ship
dates for hardware
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison
Sent: Tuesday, June 15, 2010 8:43 PM
To: paul glassman; flexradio@flex-radio.biz
Subject: Re: [Flexradio] update?
FlexRadio has stopped making forward looking announcements related to ship
dates for hardware and software products, so
when its ready is a non starter.
It appears they are busting their butts to get it done therefore give a
tenative date they hope to make is best
--- On Tue, 6/15/10, Kevin Hobbs ve...@cogeco.ca wrote:
From: Kevin Hobbs ve...@cogeco.ca
Subject: Re: [Flexradio] update?
To: 'Tim Ellison' telli
on the customers) point of view.
Kevin
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison
Sent: Tuesday, June 15, 2010 8:43 PM
To: paul glassman; flexradio@flex-radio.biz
Subject: Re: [Flexradio] update?
FlexRadio
Being involved in commercial products with a substantial software
component I can see Flex's new position to be hesitant to keep
estimating ship dates. planned, approximately, etc. quickly become
dates cast in stone in the customer's mind. Often times it's only after
a key issue is resolved
glassman'
highschooldiv...@yahoo.com, flexradio@flex-radio.biz, Kevin Hobbs
ve...@cogeco.ca
Subject: Re: [Flexradio] update?
Date: Tue, 15 Jun 2010 19:19:49 -0700 (PDT)
There are two extremes
1. Giving a date you cannot achieve for shipping
2. Telling the customer it will be ready when its
time, and pisses off the pig.
73,
Dave, AA6YQ
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz]on Behalf Of Tim N9PUZ
Sent: Tuesday, June 15, 2010 10:38 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] update?
Being
wanted it...
73's,
Mike
KE7WRJ
HL9QST
--- aa...@ambersoft.com wrote:
From: Dave AA6YQ aa...@ambersoft.com
To: Tim N9PUZ tim.n9...@gmail.com, flexradio@flex-radio.biz
Subject: Re: [Flexradio] update?
Date: Tue, 15 Jun 2010 22:54:46 -0400
There should be a point in every software project
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Dave AA6YQ
Sent: Tuesday, June 15, 2010 10:55 PM
To: Tim N9PUZ; flexradio@flex-radio.biz
Subject: Re: [Flexradio] update?
There should be a point in every software project where all show-stopper
risks have been identified and resolved (including
[mailto:ger...@flex-radio.com]
Sent: Tuesday, June 15, 2010 10:38 PM
To: Kevin Hobbs
Cc: Tim Ellison; paul glassman; flexradio@flex-radio.biz
Subject: Re: [Flexradio] update?
Kevin,
We are damned if we do and damned if we don't. Your place in the queue is
determined by the date of your pre
-radio.biz
Subject: Re: [Flexradio] update?
Dave, You do have a point, but I spent over 10 years at Cisco Systems, you know
the guys who's equipment and software pretty much run the internet backbone.
In the 10 years I was at Cisco, we never had a DUE date,,, When the new
equipment or software
customer.
KH
From: Neal Campbell [mailto:nealk...@gmail.com]
Sent: Tuesday, June 15, 2010 9:54 PM
To: Kevin Hobbs
Cc: Tim Ellison; paul glassman; flexradio@flex-radio.biz
Subject: Re: [Flexradio] update?
Hi Kevin
You must have missed the exchanges a couple of weeks ago with a few users
The sign-up page is now working. Thanks, Dale!
-Tim
--
W4TME
FlexRadio Systems - Info Management Admin.
Tune in Excitement
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Regarding my Toshiba Satellite/PCMCIA/Firewire woes...
I realise that this isn,t a problem with PSDR or Flex3K, but I was hoping
someone else may have had the problem...
Laptop recognises the PCMCIA card ( I have 3 to try) and installs drivers OK.
Connect up Flex3K and it does the
Hi Roger,
Just a thought , did you disable the onboard firewire adapter and firewire
ethernet,
when you were trying it?
Also you might need to disable wireless and bluetooth..
cheers
Paul
GI4FZD
___
FlexRadio Systems Mailing List
Finally , I got it all working (again - as it was working fine before I left
for Chile, other than the digitally signed drivers)
From a clean install:
. I followed Tim's 12 steps to ensure that all flex drivers were
removed by running SAFE MODE with Networking (thanks to whoever
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jim R
Sent: Thursday, February 26, 2009 1:49 AM
To: w...@curtiss.net; FlexRadioReflector
Subject: Re: [Flexradio] FlexRadio Update
Guys at Flex
I know it's hard to please everyone and the 60 W output may be ideal for
some
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of W7CE
Sent: Wednesday, February 25, 2009 9:16 PM
To: 'Reflector Flex-Radio'
Subject: Re: [Flexradio] FlexRadio Update
2m/70cm Internal Transverter for FLEX-5000:
We have completed the preliminary architectural design for an internal
2m/70cm
2m/70cm Internal Transverter for FLEX-5000:
We have completed the preliminary architectural design for an internal
2m/70cm Transverter that may be installed in any FLEX-5000 equipped with
the
B-0034 version RFIO board. It will provide simplex or full duplex
transmit/receive operation with
] FlexRadio Update
2m/70cm Internal Transverter for FLEX-5000:
We have completed the preliminary architectural design for an internal
2m/70cm Transverter that may be installed in any FLEX-5000 equipped with
the
B-0034 version RFIO board. It will provide simplex or full duplex
transmit/receive
Dear Flexers,
It has been a while since I gave everyone an update from FlexRadio so here
goes.
First, as a sidebar, our new tag line is, Tune in excitement! (TM). We
believe that it communicates what we hear from our customers as well as the
benefit we want to deliver in all our products.
Just a quick note to report on my activities at the ARRL.
At 1800 UTC I was joined at W1AW by about 15 employees of the ARRL,
including Dave Summer. I officially handed over a FLEX-5000 (an upgraded
beta unit) for use at their station. Following the official presentation, I
spent about 90 minutes
UHMMM, wonder what beta upgrades are included in this 5K? Jim K4JAF
- Original Message -
From: John [EMAIL PROTECTED]
To: 'Flex Radio' FlexRadio@flex-radio.biz
Sent: Tuesday, December 09, 2008 9:20 AM
Subject: Re: [Flexradio] Update from W1aw/W5gi
Just a quick note to report
PROTECTED]; 'Flex Radio' FlexRadio@flex-radio.biz
Sent: Tuesday, December 09, 2008 9:40 AM
Subject: Re: [Flexradio] Update from W1aw/W5gi
UHMMM, wonder what beta upgrades are included in this 5K? Jim K4JAF
- Original Message -
From: John [EMAIL PROTECTED]
To: 'Flex Radio
]
To: John [EMAIL PROTECTED]; 'Flex Radio' FlexRadio@flex-radio.biz
Sent: Tuesday, December 09, 2008 9:40 AM
Subject: Re: [Flexradio] Update from W1aw/W5gi
UHMMM, wonder what beta upgrades are included in this 5K? Jim K4JAF
- Original Message -
From: John [EMAIL PROTECTED]
To: 'Flex
Dear Flexers,
At the end of July, the FLEX-5000 will have been in production for a full
year. We would like to thank you, our customers, who have made the
FLEX-5000 launch such a great success. At the end of June, our sales for
2008 exceeded all of 2007. Further, we sold out and completed
Good News!
Stu, W4MO has graciously agreed to represent FlexRadio Systems at the
BirmingHAMfest this weekend.
Thanks Stu! Enjoy the show.
- Tim
-
FRS Internet Systems Administrator
W4TME
- Original Message -
From: Tim Ellison (W4TME) [EMAIL PROTECTED]
To: FlexRadio
For details, see the FlexRadio web page http://www.flex-radio.com or the
advertisement on the FRS Deals page
http://www.flex-radio.com/Products.aspx?topic=deals
-Tim
FRS KB Administrator
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of John P Basilotto
Hello AROs,
I have received a lot of requests for more info on the linear supply and how to
go about
installing it. Sorry for the delay. My work load goes up exponentially once
September
rolls around.
The part number of my +/- 15V 90ma supply is LZD-22 and it is from Lamda.
Its
mods into
the routines that I've already modified.
Thanks!
- Jeff, WA6AHL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Robert McGwier
Sent: Sunday, February 26, 2006 7:00 PM
To: FlexRadio
Subject: [Flexradio] Update
If you can download from svn
Fine Biz Bob
Beautiful display at 96 kHz. Wish I had had it during the ARRL CW.
73 de Jerry NO2T
At 10:00 PM 2/26/2006 -0500, you wrote:
If you can download from svn and build, please do so and test the 96000
and 192000 sample support IF you card can support it. It
Very nice, Bob, at 96000 at least. No difference I can see with the
delta44 except twice the panadaptor width and half the width on the
signals. Great to see +- 20 kHz.
Now I need a sound card that will do the 192000. Is that gonna be
the firebox talked about here?
Richard, W5SXD
Robert
According to the web site, the presonus firebox is capable of 96 kHz.
The 192000 here is done with my Lynx.
The issue with the offerings I can see that do 192000 is two gazintas,
two gazoutas.
You could do 2 Audiophile 192's and gang them in M-Audio Audiophile 192
control panel I THINK
I took the leap last night and downloaded both MS C# and VB .NET Free
Personal Editions a 908 Mb download that took 18 Minutes download for
both at the same time, high speed Internet is a wonderful toy.
Today during lunch I went to install it on my work laptop, that's
where the fun began.
Just in case there may be still some confusion, Microsoft is offering the Express Editions for free. They are not time limited - they will run forever.see
http://blogs.msdn.com/danielfe/archive/2005/11/07/489897.aspxPhil N8VBOn 11/10/05, Sami Aintila
[EMAIL PROTECTED] wrote:Larry, Not everyone
, 2005
12:08 PM
To: [EMAIL PROTECTED]
Cc: Sami Aintila; FlexRadio
Reflector
Subject: Re: [Flexradio] update to
.net
Actually, the difference
comes from the fact that in .NET 1.1 the System.Math.Floor() had only one
function prototype: System.Math.Floor(double). In .NET 2.0 there are now two
a problem?
Jerry WK0J
- Original Message -
From:
Eric Wachsmann
- FlexRadio
To: 'Philip Covington' ; 'FlexRadio Reflector'
Sent: Wednesday, November 09, 2005 4:42
PM
Subject: Re: [Flexradio] update to
.net
Good to know
Phil. My only reason for
commenting
Thanks for the link, my cable modem will be busy tonight.
I now have the Beta version installed and have been playing a little
with your SharpDSP code.
The MS C# IDE is a bit on the slow side so you need a very fast
machine, but using the SharpDevelop IDE is way faster.
Great, thanks Phil
Jerry WK0J
- Original Message -
From:
Philip
Covington
To: Jerald Jones
Cc: [EMAIL PROTECTED] ; FlexRadio Reflector
Sent: Thursday, November 10, 2005 2:04
PM
Subject: Re: [Flexradio] update to
.net
Jerry,You can have VS 6, VS 2002, VS
Of course, changes required to PowerSDR source between .NET 1.1 and
2.0 are trivial, as Phil already pointed out, and probably even the
beginning programmer can learn how to make them. But having to do that
with every new version that comes out is simply a nuisance.
OK, maybe we can have it
-radio.biz
Subject: [Flexradio] update to
.net
Microsoft .NET Framework 2.0 out as xp update.
Folks
Universal Controller Board Group buy
Project.
I heard from Terry W0VB and he
mentioned that he has also considered this project and may have someone to
produce the board as a project. There are still some tweaks that are being made
to the board and software, so I dont want to
81 matches
Mail list logo
