got about 5 yesterday and 40 more today.. same user
trinettejohn...@fuse.net from as far back as May-December of last
year.
gus
On Apr 19, 8:30 pm, Dan Palka turboda...@gmail.com wrote:
I've received like 20 bounced emails today, some dating from years ago,
from a user on this group
.
There are video's all over YouTube that have people showing how to put
one of those ends on.
Or you can go to a supply houses website and they will have directions
on the proper way to put the end on.
http://www.lanshack.com/make-cat5E.aspx
Hope this helps.
Gus.
On Dec 13, 12:21 pm, smac0031 m.smurph
.
Gus.
On Dec 8, 4:56 pm, applewho queel...@yahoo.com wrote:
I have BW G3, rev1, , it seems that the motherboard is good because
when turned on the light come on on the motherboard and it chimes. It
has a SCSI board installed on it, ATA/133 PCI card installed, and ati
graphics card. There are 4
I have a little san disk that plugs into an adapter that I use on my
usb to store data. On my san disk there is a little white tab that
you can move up and down that write protects it. I don't know the
specifics of your device, but it wouldn't surprise me that it didn't
have a write protect
the right restore disk for the imac before
going down any other road.
Hope this helps
Gus.
On Sep 9, 8:02 am, Iamanamma vsand...@neo.rr.com wrote:
This is what I have:
iMac G5
Power Mac 8,1
Power PC G5
Install disk set Mac OS X 10.4
When I try to install the operating system I get
Not sure on the laptops, but on the power macs one place to look for
your S.M.A.R.T. Status is under the apple menu, about this mac, more
info, the HARDWARE section, ATA, clicking the drive on the right side
of the window. the S.M.A.R.T. status will be displayed there.
Good Luck
Gus.
On Aug 26
startup chime isn't heard, neither will be the ones
for the pram reset... But the screen should turn off and on as you
hold it down and it cycles through each reset.
Do you have the system CD/DVD you could try to boot off of??
Gus.
On Aug 26, 12:33 am, John Martz zjo...@yahoo.com wrote:
On Aug
works with
the hardware you have chosen, is to actually do it.
Best of luck.
Gus
On Aug 25, 10:35 pm, John Carmonne carmo...@aol.com wrote:
Hi all
I want to know before I take a chance here if a CCC image is bootable I see
the option as a read only image so can that image be booted?
Also can I
to find them.
Thanks!!!
and Good luck on flash problem Hope you find a solution (short of
tossing the G4 in heap and replacing it)..
Gus.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs
at a lower one.
I don't know why that eluded me when I was looking at this from the
start. I should have done this first thing. Lower to the clock speed
to the lowest the board would allow and see if I could get the video
up.
Thanks!
Gus.
On Aug 6, 4:42 pm, Clark Martin cm...@sonic.net wrote
.
Gus.
On Jul 20, 2:19 am, Gus gusr...@comcast.net wrote:
System: G4 Yikes with 400mhz Processor clocked to 450 / 750 mb
memory. a PC keyboard hooked to the USB port. PC mouse hooked to the
USB port.
I got this processor from ebay. Says it is a 500 mhz G4. DId a one
for one swap with the G4
I don't have a panther disk, So I thought I would just ask. Is the
disk utility on panther the same version as is on Tiger? Can you run
Tigers Disk Utility under Panther?
Glad it worked out out for you!
Gus.
On Aug 4, 9:21 am, Mike Linnett mike.dogho...@googlemail.com wrote:
On 4 Aug 2010
only conclude that this PPC G4 is no good.
Any last idea's now that I have the keyboard?
Thanks for all that contributed.
Gus.
On Jul 20, 2:19 am, Gus gusr...@comcast.net wrote:
System: G4 Yikes with 400mhz Processor clocked to 450 / 750 mb
memory. a PC keyboard hooked to the USB port. PC
from there. Not sure if that works on YouTube or
not.
some of those streaming video's can be a headache to dl.
Gus
On Jul 25, 10:02 am, Michael Emery mem...@texas.net wrote:
Geke:
I’d like to know a bit more about
that standard Safari hack?
Google download youtube video in safari
that).
Gus.
On Jul 22, 6:43 am, Stephen Conrad khel...@gmail.com wrote:
I want to DL this but nothing I have tried
workshttp://www.youtube.com/watch?v=iicrreXTauIhd=1
Safari
--
I tried Cosmopod but it only sends me to the page to buy it (clicking
'Later does nothing but close
See, this is the thing, a processor will run UNDER-CLOCKED better than
it will OVER-CLOCKED. If I have a bootable system with a g4-450 mhz.
Putting a 500 mhz processor in there without changing the jumper
settings will only tell the 500 mhz processor to run at 450. Much
like it tells the 400
.. then up to 500 No
change with the 500 mhz g4, Still chimes, no video.
Thanks so much you guys.. You have always been here when I have needed
help!!!
Gus.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs
On Jul 20, 4:11 am, pdimage pdim...@btinternet.com wrote:
On 20/7/10 08:19, Gus gusr...@comcast.net wrote:
BUT!!! I am smart enough to know that I don't know everything. Is
there something I am missing with this G4 - G4 swap?
Thanks.
For grins, I did drop the system clock from 400
On Jul 20, 9:02 am, Dan dantear...@gmail.com wrote:
At 12:19 AM -0700 7/20/2010, Gus wrote:
G4 Yikes with 400mhz Processor clocked to 450 / 750 mb memory. a PC
keyboard hooked to the USB port. PC mouse hooked to the USB port.
I got this processor from ebay. Says it is a 500 mhz G4. DId
mhz chip and put the 400 mhz chip back in with jumper
settings for a 450mhz.
booted up fine.
On Jul 20, 1:23 pm, Kris Tilford ktilfo...@cox.net wrote:
On Jul 20, 2010, at 1:02 PM, Gus wrote:
Anything else I should try before I tell this guy his cpu doesn't
work. I want to be sure
I only get the chime, It doesn't size the system or get into OF. No
boot process at all starts.
Thanks for your reply.
Gus.
On Jul 20, 4:20 pm, pdimage pdim...@btinternet.com wrote:
On 20/7/10 21:27, Gus gusr...@comcast.net wrote:
okay.. unpluged everything. removed everything from
Ethernet that is on the Beige right now.
Are there any 3rd party 100/10 vendors out there that still have the
OS 9.2.2. system extensions on their website.
I hope someone has been down this road before and can help me. I
would appreciate any input!!
Thanks!
Gus.
Beige Config:
G3 processor
/transcoderredux/
Hope this helps.
Gus.
On Jun 23, 9:01 am, John Carmonne carmo...@aol.com wrote:
Hi All
I have a movie that's a .mkv file 4.46 GBs I want to burn it to a DVD but I
can't get Toast 10 to see it as an image I also tried Toast 8 and 6 still no
cigar. Is this spometing I can
.
Well thanks for all that contributed with Ideas.
See ya on the web!
Gus
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml
with 9.2.2 (as well as Tiger).. it didn't do well
with panther.
On May 25, 10:38 am, Larry Stotler larrystot...@gmail.com wrote:
On May 23, 7:07 pm, Gus gusr...@comcast.net wrote:
Well, after doing some considering... I think I will try to put the
Yikes board in the BW. I read around
OWC has one.. heard it was better than other.. I never tried any of
them so I can't say
http://eshop.macsales.com/Tech/FTP/newertech/BWG4Enabler.hqx
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus
On May 22, 7:16 pm, Len Gerstel lgers...@gmail.com wrote:
On May 22, 2010, at 7:24 PM, Gus wrote:
I was directed to a web site that pointed out that you had to hobble
the bus speed on the G3 in order to use the Yikes G4 processor in
it.
Please cite the site. Both are 100MHz machines
Why did the bus Speed have to be reduced? I thought the yikes had a
100 mhz bus speed???
This is disconcerting.
On May 22, 12:15 pm, Peter Haas peterh...@cruzio.com wrote:
On May 22, 2010, at 9:23 AM, John Ruschmeyer wrote:
The patch from any Vendor should work... Personally I prefer the
.
Thanks for your time on this.
Gus.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http
I am considering putting a G4 zif into my G3 BW. I saw on some
upgrade sites that a software patch (ROM Patch) was needed. Depending
on which card was installed each vendor had its own patch.
If I happen to find a zif from a G4 Yikes, would I still need a rom
patch? Would one from the third
If I recall properly, adding the VRAM gave more color options for my
beige G3. When I added the Radon 7000 to run Tiger I did have to
install a fan blowing across the video card to keep it from over
heating.
It would be fair to say that I have the desktop 266 (not the tower) so
it takes those
Safari started acting up again.. I trashed the prefs and reset the
homepage.. Still sitting there without loading. Any good lightweight
RELIABLE web browsers out there?
I tried firefox, it seems to have a big problem keeping its links in
order. I drag a bookmark and next time i visit it it
. I have installed all the latest updates for Tiger.
Suggestions on how to troubleshoot, or anyone with knowledge if this
is a known problem, would be greatly appreciated.
Thanks all for your help!!!
Gus.
--
You received this message because you are a member of G-Group, a group for
those
Dan, what is the difference between using cp and ditto when
transferring large amounts of files like the OP is doing?
On Mar 27, 1:29 pm, Dan dantear...@gmail.com wrote:
At 11:12 AM -0700 3/27/2010, John Carmonne wrote:
On Mar 27, 2010, at 10:58 AM, Dan wrote:
At 7:32 AM -0700 3/27/2010,
to make sure you have enough free space
on your startup drive, or what ever drive your burner uses for cache
memory.
Good Luck
Gus.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs
note. It would seem that the PC-66 ram would have gone
down in price considerably since I bought the computer new. Anyone
got a good source for either PC-66 or PC-100 that would run in this
Macintosh?
Any other practical tips I should know before proceeding?
Thank you,
Gus.
--
You received
It is a tad slow.. But what I am using it for it not that processor
intensive, however it does require the memory to run properly. Seems
it spends most of its time scrolling out to virtual, finally starts
thrashing, and then requires a hard reset. :(
So tiger with 192 mb doesn't get it done..
Thanks for tips!!
On Feb 9, 1:26 pm, Kris Tilford ktilfo...@cox.net wrote:
On Feb 9, 2010, at 1:13 PM, Gus wrote:
What is the maximum ram you can put into the beige G3 Desktop?
768 MB total is the max, three 256 MB sticks of low-density PC66,
PC100, or PC133 SDRAM DIMM. Low-density means
In addition to the other suggestions, I would start out with a file/
disk check/repair using the diskutil. You can access it by booting up
on the cd boot rom for your system.
Gus.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5
I am (at the moment) using firefox. When I clicked the link Quicktime
Opened with a video clip. Under peferences in Firefox, I have wmv
(windows media file) set to Flip4Mac and to open in Quicktime.
From this It would seem you are having codec problems (not being
loaded or misdirected in your
do you have to have some sorta rom patch?? to allow the BW G3 to run
one of these drop in cpu's? I have this BW and a Beige g3 that need
that extra little pick me up and was thinking of a cpu upgrade, if
inexpensive enough and compatible..
thanks
Gus
On Dec 15, 8:20 pm, dc dbc...@verizon.net
remember to try and boot with all extensions off to maybe give a clue
if it is a bus error. the shift key after power up should do that.
hope this helps and good luck. report back any results, i am sure
someone is better at this than i am that can give additional ideas.
Gus
--
You received
it might download as a binhex file. you can use stuffit under os x to
convert it to the smi file and run the install from classic.
On Dec 5, 12:19 pm, Bill Connelly billycarm...@verizon.net wrote:
On Dec 5, 2009, at 8:58 AM, Lawrence David Eden wrote:
When I launch Classic on my G4, I get a
I just want to thank all of you who responded. I should have checked
the archive before posting my question. I read about it on the
wikipedia, but I just wanted to know of some one who actually TRIED
it.
again, thanks to all!!!
Gus.
--
You received this message because you are a member of G
only came
with usb 1.0, unless you put some sort of PCI adapter card for USB 2.0
in there???
Your thoughts are appreciated!!!
Gus
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs
As it happens, I found out how to make this happen in the iMac. the G4
has ”windows sharing among the options, the iMac does not. You have to
dig to find out how to do that.
I thought the sharing options had more to do with the OS version of
the software more so than the platform you are
ditto on the omni page pro for X. you can get those for cheap on the
swap list.
On Nov 16, 1:35 pm, Ross olfec...@digizip.com wrote:
On Nov 16, 9:45 am, Dan dantear...@gmail.com wrote: Can anyone recommend a
free or very inexpensive decent OCR software
package, that can pull text out of jpg
many people in this forum have mentioned loading OS 9.2.2 with netboot
from apple.
http://docs.info.apple.com/article.html?artnum=120243#English
They also mention removing the two netboot extensions before booting
into classic.
If you go to Google and go to this group list and type in a search
On Oct 10, 6:16 pm, Nestamicky nestami...@gmail.com wrote:
Also, while I have your attention. Do you know of a DVD authoring
software; avi to dvd that's even paid for, free would be great. One that
does not take 39 hours to make a single dvd. Please don't mention toast
to me.
I don't know
http://www.blueskyheart.com/bsi.html
Blueskyheart has mostly really cool desktops, but they also have a set
of icons that are neat.
Good Luck!!
On Oct 7, 6:29 am, roger deghetto stink...@ptd.net wrote:
im looking for sites that have high quality os x icons for the dock
etc i know of
I really like NTI Dragon Burn... Its pretty dumbed down so I can use
it without knowing a lot about dvd and cd formats.
Good Luck!
--~--~-~--~~~---~--~~
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop
On Oct 4, 4:18 pm, Jonas Ulrich jonasulrich3...@gmail.com wrote:
I turned the extentions off and it booted! I am going to try to find an
older 9 installer. I have run 9.2 on several beiges with no problems
though...
On os 9 it lets you turn off extension until you find the one that
causes the
I am wondering if you don't mean bit torrent?? I know vuze makes a
client that is fairly stable under ox X 10.4. If you do mean the
old .sit files go to version tracker and look up stuffit expander. I
believe they have a free utility for unstuffing those files.
Good Luck!!
On Oct 1, 8:39 pm,
Right, I have a monitor that is on a Beige G3 that I want to connect
to a VGA connector on a BW G3. So, I need to go from VGA to the
four pin Apple Monitors.
On Sep 23, 1:49 pm, J.M.P.Hissel jo...@xs4all.nl wrote:
On 23-09-2009 01:26, Chance Reecher, cnrtechh...@gmail.com, wrote:
Are we
they had some 7000 mac drivers at the AMD site.
http://www.amd.com/us/Pages/AMDHomePage.aspx
On Sep 22, 2:41 pm, Geke gevangaste...@googlemail.com wrote:
Small correction: I just found a nice review of this card, which also
says that the drivers come on a CD with the card. Look
will be fine.
Anyways... Thanks for sticking with me as I loose my mind.. LOL
Gus.
On Sep 23, 7:40 pm, Kris Tilford ktilfo...@cox.net wrote:
On Sep 23, 2009, at 7:26 PM, Gus wrote:
Looking at the picture on the website. It looks like the Radeon 7000
card is an PCI 32 bit card. The Beige G3 has 16
wait.. the old four pin was RGB.. the monitor is a DB-15.. isn't that
what they called them?? And the VGA/SVGA is what the Blue and White
uses...
Anyways.. I have a DB-15 Monitor and I want to hook it up to the VGA
port of the BW.
On Sep 23, 7:17 pm, Gus gusr...@comcast.net wrote:
Right, I
Sounds like what I need...
email me.. gusr...@comcast.net
On Sep 23, 8:29 pm, Ken Daggett kadagg...@verizon.net wrote:
On 23 Sep 2009, at 18:23:13 PDT, Gus wrote:
wait.. the old four pin was RGB.. the monitor is a DB-15.. isn't that
what they called them?? And the VGA/SVGA is what
Looking at ebay, it seems all that is advertised is the adapter to
hook the old Beige computers up to VGA monitors. Nothing to hook the
old DB-15 monitors to a HD-15 card.
--~--~-~--~~~---~--~~
You received this message because you are a member of G-Group, a group
well if it is an agp card, will it work in my blue and white better
than the ATI card that is in there now?
Thanks!
On Sep 21, 12:13 pm, Clark Martin cm...@sonic.net wrote:
pdimage wrote:
On 21/9/09 15:59, Len Gerstel lgers...@gmail.com wrote:
On Sep 21, 2009, at 10:48 AM, Gus wrote
Never mind, I just opened up my G3, its a half height PCI slot... oi
vey... Well, lets hope the guy knows how to hold a camera straight
and that is really a pci card and not an agp.
--~--~-~--~~~---~--~~
You received this message because you are a member of
Yeah, I remember seeing the correction saying that it was a PCI card
and not an AGP card... NEWAYS... Will I have to hunt down drivers
for this if I put it my mac, or are they already on the install CD or
on the Hard Drive?
Not sure how that works.
Thanks!!
Machine Model:PowerMac1,1
CPU Type: PowerPC 750 (2.2)
Number Of CPUs: 1
CPU Speed:400 MHz
L2 Cache (per CPU): 1 MB
Memory: 768 MB
Bus Speed:100 MHz
Boot ROM Version: 1.1.1f4
Sorry to talk your ear off!!
Gus
with the VGA Monitors. Never seen where they went
the other way around though.
Thanks so much!
Gus
--~--~-~--~~~---~--~~
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus
install the
card?
Any help would be greatly appreciated.
Gus
--~--~-~--~~~---~--~~
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http
mine does that to.. no idea why... ???
On Aug 10, 1:01 am, dorayme dora...@optusnet.com.au wrote:
In the directory of a disk, I have a search box at the top that takes
text. I am in Tiger latest. I have never been able to type something and
then go back and insert the cursor at the beginning
On Jul 12, 12:37 am, MaGioZal magio...@gmail.com wrote:
On 7/10/09 9:11 PM, Nick Burman at nbur...@gmail.com wrote:
Anyone know how to make this Mac startup from a CDROM so I can install
Jaguar?
Hi Nick,
Well, I am running here Mac OS 10.4 on a Beige G3 with 512MB RAM, and
without
First, Thanks to all who replied. I was looking at supported DVD's
that the system said it could write:
PIONEER DVD-RW DVR-112D:
Firmware Revision:1.21
Interconnect: ATAPI
Burn Support: Yes (Unsupported)
Profile Path: None
Cache:2000 KB
Reads DVD:Yes
CD-Write:
?
Thanks so much for your input!!
Gus.
--~--~-~--~~~---~--~~
You received this message because you are subscribed Low End Mac's G3-5 List, a
group for those using G3, G4, and G5 desktop Macs - with a particular focus on
Power Macs.
The list FAQ is at http
I need to tag my mp3's, what program have you found that does a good
job of this on the mac? Thanks.
--~--~-~--~~~---~--~~
You received this message because you are subscribed Low End Mac's G3-5 List, a
group for those using G3, G4, and G5 desktop Macs - with a
I know I am going to come off sounding ignorant, that said.. I thought
that DOCSIS 3.0 was supose to
be backward compatible with DOCSIS 2.0 both at the Cable Modem and the
Cable modem termination system.??
anyways..
On Feb 26, 10:32 pm, Dan dantear...@gmail.com wrote:
At 2:42 PM -0800
if it has os9 on it, you can boot it up with the extensions disabled,
(holding down the shift key) and disable extensions in groups until
you get a clean boot, there may be one that is hanging the system. as
far as osx, as was recommended by another on this topic, the verbose
mode may also clue
Keyspan use to make a usb to serial port adapter for mac. I used it
on my BW G3 before I got broadband and it worked quite well. Good
Luck..
On Jan 15, 11:01 pm, Paul pper...@gmail.com wrote:
I have a good US Robotics external V.90 modem that I'd like to be able
to use with a G3 blue/white
cards and if they need an
adapter for my mac type monitor to work?
I read this list every day with out fail and you guys are the best...
Thanks in advanced!!
Gus.
--~--~-~--~~~---~--~~
You received this message because you are subscribed Low End Mac's G3-5 List
On the CD-R and DVD-R I believe if you are writing a multisession CD
or DVD you can add files later... Typically they come up as an
additional CD or DVD on the desktop... depending on how many sessions
you have you will have an additional CD or DVD on the desktop. Once
you close the CD or DVD
I have been using a PIONEER DVD-RW DVR-112D on my G3 BW.. it reads/
writes/burns CD-R +R and RW as well DVD-R +R and RW... its been a
good little drive for the money.
Hope this helps.
On Dec 20, 5:45 pm, Mike Baker psufa...@yahoo.com wrote:
Can anyone recommend an DVD/CD burner/player for a
password, so just enter it when it ask.
I hope this helps some..
Gus.
--~--~-~--~~~---~--~~
You received this message because you are subscribed Low End Mac's G3-5 List, a
group for those using G3, G4, and G5 desktop Macs - with a particular focus on
Power Macs
as of yet.
Thanks much for the Top command..
G.
On Dec 1, 4:06 pm, Hunter Fuller [EMAIL PROTECTED] wrote:
2008/12/1 Gus [EMAIL PROTECTED]:
If you open applications in the gui.. say textedit and mail and
excel.. is there any way to view these process via the terminal...
Run the command
If you open applications in the gui.. say textedit and mail and
excel.. is there any way to view these process via the terminal... is
there a way to kill them via the terminal or start them from the
terminal?
just curious..
Thanks for those that have helped in the past.. you guys are very
try
http://www.dougintosh.com/ware/vga_adapter/_d_VGA_adapter1.html
On Nov 17, 1:57 am, Brian Christmas [EMAIL PROTECTED] wrote:
G'day listers
A while ago I posted a question about whether or not a monitor or
radeon 7000 card would be defunct on my neighbors Sawtooth.
I've just
Well if you are going to be doing java, c++ ect... programing your
going to need XCODE. You can download it at the developers website
(you need an account, but its free so, just fill out the form)
http://developer.apple.com/
Good Luck and welcome to the list!!!
Gus
On Sep 18, 11:02 am
81 matches
Mail list logo
