MASH is definitely an area of the DFSMShsm documentation that we need to
improve. We have this as a 'To Do'.
The primary intent of the MASH function is to improve DFSMShsm throughput. It
can be shown that as the number of tasks within a single HSM address space
increases that the throughput
question on their support site was only a few months ago.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives
are shutting down a Started Task, say for maintenance.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives
Others have already mentioned 'hardware-based' facilities like PPRC XRC.
One aspect of those options that is sometimes overlooked is they are
chargeable features on the source ( for both facilities ) and target ( for PPRC
only ). The XRC option also would require some 'configuration'
/OS
image usually IPL's on a monthly basis and we have never encountered an
issue with Changeman that required us to IPL.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
the 'long
route'. EMC was very involved during the implementation of our SRDF/S
process in 2004, so I'm a little surprised they couln't find us for you.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access
the beep if the 3270 data stream says a
beep should be performed.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search
, maybe replace,
don't remember, a couple of entires in the VM/CP nucleus 'CNTL' file before the
VM/CP nucleus re-build. When I saw your post, I thought of this VM Magic
product and how it did its 'magic'.
HTH
Glenn Miller
backed off to the previous microcode, but left the upgraded HSC/VTCS
software running on all our z/OS images. We sent SUN/STK the HSC trace
data they requested we activate and we are awaiting their response.
Ideas, thoughts, suggestions, etc.
Thanks,
Glenn Miller
you in advance for any help you can give us.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http
this problem. I'm interested in 'talking' with any
site that is running the same configuration as us.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message
CODE WAS 0
I also received the following messages on each of my z/OS images, which I
normally receive whenever I start a PPRC pair on my system:
IEA494I 3F3E,SO3F3E,PPRC PAIR PENDING,SSID=992F,CCA=3E
IEA494I 3F3E,SO3F3E,PPRC PAIR FULL DUPLEX,SSID=992F,CCA=3E
HTH
Glenn Miller
Hi Ron,
You can contact me off-list at the email address:
[EMAIL PROTECTED]
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
I'm not really clear on how/why/were SUN/STK got involved, unless you
purchased the switches from SUN/STK. That would make sense. If not, then
I'm not sure what the 'connection' issue is.
HTH
Glenn Miller
, however they indicated
they have a two day turnaround for some problems, longer for more complex
issues. I was just wondering.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
. We have extra boxes so if we ever have
a box failure we plan ( haven't had to yet ) to replace the failing box with
another unit. Not a great plan, full of questions but...
HTH
Glenn Miller
--
For IBM-MAIN subscribe
Offload SYSOUT
transmitter ( the OFFn.ST ) instead of DISP=KEEP. I have used DISP=KEEP
before just for testing, and I have found it very difficult to verify that my
OFFLOAD dataset contains what I thought it should.
HTH
Glenn Miller
: WMQTool! from a
company called: Niratul . We don't use this tool however he mentioned that it
because it has a 30 day trial.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL
Use this URL for the Chicago Area VM ( and Linux ) ENthusiasts:
http://cavmen.home.comcast.net
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message
or did you want
to have HSM begin using those 'new' address spaces for the 1st time?
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM
-implementing-ldmf.pdf
We have never used the LDMF product, only the TDMF product so I don't
have any real world experience.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
sites ( almost 40km ). The 9037 says it is supported up to
40km. Who wants to be that close to edge.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED
Hi Steve,
I had the same thought when I read that IBM announcement letter. When I
read the IBM announcement letter: 208-076, that product IBM System
Services Runtime Environment for z/OS seems to fit. We don't have that IBM
TPC for z/OS product.
Glenn Miller
for the PMR
number to be sent to me via Email. No ETA for repair.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search
Eric,
Sorry I don't realy check this site often and I thought I replied to this
already
I guess not.
http://cbttape.org/ftp/updates/CBT708.zip
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
information for all the 9672 processors. The Sales manual shows the
withdraw from marketing and withdraw from service dates for each of the
model types.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access
With CA-XCOM, Pat, we transfer between mainframes using SNA or TCP/IP
and encrypt using 'OPEN SSL'
Regards,
Glenn
Glenn Havelock, CA
Sr Consultant, Ewing, NJ USA
Cellular phone 908-398-7726
Office phone 609-583-9481
[EMAIL PROTECTED]
-Original Message-
From: IBM Mainframe
If there is a copy of XCOM on both sides that would likely work well. Sometimes
people have copies of it and are not aware that such copies are on z/os.
Regards,
Glenn
( Sent from blackberry)
Glenn Havelock
Cell 908 398 7726
[EMAIL PROTECTED]
- Original Message -
From: IBM
Looks fine to me right now
Glenn Havelock, CA
Sr Consultant, Ewing, NJ USA
Cellular phone 908-398-7726
Office phone 609-583-9481
[EMAIL PROTECTED]
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Vernooy, C.P. - SPLXM
Sent: Thursday, January
Try deleting it with ISMF.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
created, i.e. within a few minutes
prior to the CDRT 'setup' process ) on the D/R z/OS image? Or do
you 'restore' your z/OS 'system' from non-current VTV's that reside on MVC's
that cannot be added to ( i.e. the MVC is marked 'full' )?
Thank you in advance for your help.
Glenn Miller
of it is quite stable and
has stood the test of time.
( Sent from blackberry)
Glenn Havelock
Cell 908 398 7726
[EMAIL PROTECTED]
- Original Message -
From: IBM Mainframe Discussion List IBM-MAIN@BAMA.UA.EDU
To: IBM-MAIN@BAMA.UA.EDU IBM-MAIN@BAMA.UA.EDU
Sent: Sun Dec 30 13:31:30 2007
Subject: [OT
Hi Franz and Dan,
Thanks for using my product and sorry I didn't see this earlier. Yes, you
should always check the updates page at
http://www.cbttape.org/updates.htm for the latest releases, I also have a
mailing list for when I've updated the product to be on this list I just need
an
email
Hi Franz and Dan,
Thanks for using my product MPFXTALL and sorry I didn't see this earlier. Yes,
you should always check the updates page at
http://www.cbttape.org/updates.htm for the latest releases, I also have a
mailing list for when I update the product, to be on this list I just need an
The first place to look is in SYS1.PARMLIB(MPFLSTxx) to see if that message is
being managed by MPF then if there's exit associated with it. Since MPF exits
can issue replies, the reply would be issued on behalf of the task issuing the
relpy, MPF exits 101. If the program in MPFLSTxx is
I’m a little late to the party on this one, but I just had to reply after
reading
this last post by Brian. First, about shooting commands, you could use the
freeware product AutoMan from Simon Spanchak file 627 @ cbttape.org. This
product works quite well at shooting commands and submitting
Hi Eric,
Hows SOUTSYS still works for me under z/OS 1.7.
File 708 update link:
http://www.cbttape.org/ftp/updates/CBT708.zip
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with
Sorry to hear that Eric hope you find something good luck.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at
Please post the hourly rate.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
. I had a 15
minute outage window, once a month to maintenance the O/S, hardware, etc.
There had been a project to replace the HP/Tandem Base24 system with a
z/OS-based Base24-eps solution. However, that project never really got
going.
HTH
Glenn Miller
capable of running at or very near 24x365.
I would have been very interested to see it run.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM
the INFO APAR: II08927 might apply.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu
Lizette did you call level 1 support and were they able to assist you?
( Sent from blackberry)
Glenn Havelock
Cell 908 398 7726
[EMAIL PROTECTED]
- Original Message -
From: IBM Mainframe Discussion List IBM-MAIN@BAMA.UA.EDU
To: IBM-MAIN@BAMA.UA.EDU IBM-MAIN@BAMA.UA.EDU
Sent: Wed Oct
reader Spool files that are intended to be
sent to the MVS JES2 NODE?
I don't recall the RSCS commands to perform these checks, we haven't had
RSCS since 1999.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access
If you have CA-PDSMAN, you can do it with that product as well.
Regards,
Glenn
Glenn Havelock, CA
Sr Consultant
Cellular phone 908-398-7726
Office phone 908-874-9436
[EMAIL PROTECTED]
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Farley
If you have CA'S PDSMAN its FASTCOPY utility will handle this.
Regards,
Glenn
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Edward Jaffe
Sent: Friday, October 05, 2007 10:44 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Mass PDS
be an issue.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
( probally sequential reads ).
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm
' increase
from z900 to z990 is being caused by 1) new function support 2) support for
non-disruptive ( no POR ) addition of all engines/books. I would assume that
the z9 is continuing/growing that capability.
Glenn Miller
--
For IBM
If you mean Faver, which backs up files, it is CA.
Regards,
Glenn
- Original Message -
From: IBM Mainframe Discussion List IBM-MAIN@BAMA.UA.EDU
To: IBM-MAIN@BAMA.UA.EDU IBM-MAIN@BAMA.UA.EDU
Sent: Fri Jul 27 10:09:52 2007
Subject: Who is the supplier of Favor?
Hi List,
Can anyone
No problem Herman and feel free to contact me if you need any techical info on
the product.
Regards,
Glenn
- Original Message -
From: IBM Mainframe Discussion List IBM-MAIN@BAMA.UA.EDU
To: IBM-MAIN@BAMA.UA.EDU IBM-MAIN@BAMA.UA.EDU
Sent: Fri Jul 27 10:31:33 2007
Subject: Re: Who
If you have a file manipulation product, such as CA FILEMASTER PLUS or
some other similar product, most have a function that will provide a
record count in any sequential or VSAM file for you.
Regards,
Glenn
Glenn Havelock, CA
Sr Consultant
Cellular phone 908-398-7726
Office phone 908-874-9436
For those of you who aren't on my email notification list and use my free
automation product, there was a slight bug in the new version with the IF
WORD ## P* wildcard feature, this has now been fixed and is on the updates
page at a CBTTAPE near you. This is also the latest release Version 5.9
Hi Garry,
How’s everything? I also liked Dell before I bought my HP, yes Dell has the at
home service they send a tech to fix what’s broken and something always
seems to break. I still have my first Dell laptop and it still works but just
about
every component was changed at some point
recommends that you use record type 30 rather than record types
4, 5, 20, 34, 35, and 40. Use of record type 5 may cause you to
miss key workload indicators.
Therefore, it would seem that using the SMF Type 5 record might be risk.
Glenn
recently ( last couple of weeks ) 'patched together' a similar SNMP interface
between IBM's SA/390 and CA-UNICENTER. We don't have IBM's Tivoli
Enterprise Console ( TEC ) so we had to 'band-aid' a SNMP interface with IBM
SA/390.
Glenn Miller
Mark:
Why are you considering such a switch? Call my cell 908 398 7726 or email me at
[EMAIL PROTECTED] and let's talk offline if you wish.
Regards,
Glenn
Glenn Havelock, Sr Consultant, CA
908 398 7726 (cell)
(Sent from my Blackberry)
-Original Message-
From: IBM Mainframe
, technically, any outage outside of the above stated timeframe should be
identified as an un-scheduled outage, depending on your point-of-view.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
AND SYSTEM RESET
CLEAR the CF LPAR that contains the primary checkpoint ( simulates a site
failure at the primary site ). Then IPL z/OS and restart JES2, see what
messages/WTORs JES2 issues.
HTH
Glenn Miller
--
For IBM-MAIN
DFSMS Advanced Copy Services.
All of the above assumes that the reason you need the 'parallel' copy of these
datasets is because you do not want to quiesce the application ( CA7 ) that
owns these datasets.
HTH
Glenn Miller
or approval?
Just wondering.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm
address.
I have found it easier to just specify 2-byte link addresses for all control
units
on my FICON directors. It works and avoids confusion.
HTH
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions
Also, the 'sunset' warning messages are not being displayed anymore when
you enter each function. I tried to access these functions on Sunday morning
about 02:00 Central Time and they were unavailable(down). The 'sunset'
messages were there indicated the functions were unavailable.
Glenn
of 2
smaller CECs. Alas, that hasn't happened yet.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http
servers ( some
9672s and MP2000/MP3000 ) would not be manageable by that upgraded HMC.
Since the ETS call out function of the STP feature uses the HMC you should
already have the modem/phone line available ( does anyone run all their HMCs
without a modem/phone line, just curious ).
HTH
Glenn
to the 'MVS BTAM Cookbook' which
describes how to 'extract' the BTAM/SP FMID's from an existing SMP/E
environment and how to 'transfer' them to another SMP/E environment.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive
run
in
a STP-only CTN environment, then the ETS call out would be done by your
zSeries HMC. However, the gradual adjustment to the CST ( Coordinated
Server Time ) is done by the Support Element.
HTH
Glenn Miller
--
For IBM
of their TOD clock
of as much as 25 seconds per month, yet they are still 'within spec'. If one
was to experience a mainframe TOD clock drift ( current supported machines,
not 3090s, ES/9000s, etc ) of something much larger than that, I recommend
you place a call with IBM Hardware support.
HTH
Glenn
if you have any questions regarding this info.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http
)
* CAN'T HAVE SYMBOLIC(S) E.G. (OSRES ETC.)
The INFO APAR also has a couple of examples of what does and doesn't work
with LOADxx and System Symbols.
Glenn Miller
--
For IBM-MAIN subscribe / signoff / archive access
Brian and Ken,
I’ve done dozens upon dozens of conversions from OS/390 to z/OS and yes I
have seen catalog issues when sharing catalogs between these past the N-3
mark. Strange things start to happen such as seeing catalog entries on one
system and not seeing them on the other, I have no
Hal,
I had encountered the same problem a few years ago. The response I got
from IBM was that the 'UCB pinning' activity was done for every device listed
in the CONSOLxx member, regardless of whether that device was or ever could
be 'activated' as a MVS console. They indicated the 'UCB
CA-Shareoption/5 may be appropriate, Dave - let me know if you would like to
discuss any technical issues or questions.
Regards,
Glenn Havelock, CA
[EMAIL PROTECTED]
Glenn Havelock, Sr Consultant, CA
-Original Message-
From: IBM Mainframe Discussion List IBM-MAIN@BAMA.UA.EDU
To: IBM
PAGE dataset fill up uniformly, if you have 3 page dataset, two(2) of them
250 cylinders and one(1) of them 1000 cylinders and there is 750 cylinders
of page space needed for paging the two(2) 250 ones will be at 100% and the
one(1) 1000 one will be at 25%. My guess is the 100% used page
' anything wasn't cool 10 years ago when STK
designed the Iceberg box.
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please notify the sender
( the IBM RVA doesn't count, it was a 'newer' STK ICEBERG
with an IBM label
on the cover of the machine ) the LSA concept to internally store the data.
Glenn Miller
---
This message (including any attachments) is confidential
the 'workbench' tool would not be included. It doesn't appear that this
'workbench' tool is available
as a standalone product. Does anyone know why the 'workbench' tool was not
given to the
open source community?
Glenn Miller
and enter the LINK
command
again.
Operator Response: Contact your system administrator to obtain the
necessary
authorization.
I'll bet somebody changed something in the database of RACF/VM.
Glenn Miller
---
This message
I received a response from the IBM'er working on my PMR on this issue:
Hi Glenn, There are nine different actions that can cause a notification
to be generated for a tracked APAR. These events can occur in the same
day. It is likely and in some cases very probable this can cause
multiple
in a PDS/PDSE compare
to a 'backlevel' version of the same member?
Please contact me off-list if you have specific questions.
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged
You may want to have a look at the DYNALLOC macros on the CBT tape, very
easy to use, theres a good example in my file 708
On Sun, 1 Oct 2006 11:26:43 -0300, Shmuel Metz (Seymour J.) shmuel+ibm-
[EMAIL PROTECTED] wrote:
In [EMAIL PROTECTED], on 09/30/2006
at 10:10 PM, Gary Smith [EMAIL
I like the old IPO CATCVTM to build a new master catalog allthough it's
unsupported, there also a rewite of it in rexx on the CBT Tape.
On Wed, 4 Oct 2006 19:04:21 -0500, Ed Gould [EMAIL PROTECTED] wrote:
Look at repro mergcat
Ed
On Oct 4, 2006, at 5:46 AM, Zoran Trifunovic wrote:
We have
to apply the PTF until Thursday night, so I may not be
able to provide
any additional information until Friday or later.
HTH
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged
Hi Joel...you could try Pennsylvania Power and Light, which I believe
still is a mainframe shop. They have a branch in Harrisburg, although
they're headquartered in Allentown, PA.
Regards,
Glenn
Glenn A. Havelock
CA
Senior Consultant
cell 908-398-7726
office 908-874-9436
fax 908-766-6461
,
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please notify the sender by
return e-mail and delete this message from your system. Any
in the 'background' without a z/OS
image being there
( after the initial Flashcopy or PPRC commands, of course ).
HTH
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received
:36:46 HCPCPS6000E The range of device numbers cannot exceed 256.
Ready(06000); T=0.01/0.01 17:36:46
Guess I have an answer.
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged
.
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please notify the sender by
return e-mail and delete this message from your system. Any
having last week, IBM LE COBOL Level 2 support
confirmed the above
information as being accurate for z/OS R7.
HTH
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have
9672, maybe
this applies.
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please notify the sender by
return e-mail and delete this message
have a PMR opened with the TAMBI product's level 2 group to ask why this
is.
Thanks,
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please
to be bigger that 639KB.
I have a PMR with IBMLINK2K support.
Thanks all,
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please notify
for this
situation. We are working with the application vendor on this issue.
HTH
Glenn Miller
---
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please notify
document is sent to
the Windows users, that CICS virtual storage also appears to be released.
Lastly, the View Direct Administration task ( a Batch Job in our
environment ) appears to have a very stable, almost consistent use of its
virtual storage area.
HTH
Glenn Miller
Paul,
You could use file708 on the www.cbttape.org always check the updates
page. A new release will be out shortly. If you like this product and
wish to be on the email notification just send me an email.
--
For IBM-MAIN
is a OPS/MVS REXX exec that looks like:
ARG JOBN
PARM = /LOGON OPSMAIN;DEMAND,JOB=JOBN;/LOGOFF
RC = OPSCA7(PARM)
RETURN RC
I'm guessing you could substitute the Address OSF with a Address OPER
and substitute the OI CA7ID00 P1DM330D
with a(some) MVS command(s).
Glenn Miller
On Tue, 7 Mar 2006 00:11:47 +0800, caleb ong [EMAIL PROTECTED] wrote:
We planning to migrate our os/390 2.7 system to z/os v1.7.
Since there is no coexistence and fallback ptf available for this
migration. We would like to know what is the best way to migrate
the user catalogs to the new system.
Hi Jim,
You may want to call STK ( Sun ). They have a product called: SVAA (
Shared Virtual Array Administrator ).
According to their website, the supported storage systems are: V-Series
(SVA) or RVA, any model.
HTH
Glenn Miller
the volume level or dataset level )? This support was provided by
LIC 2.4.0 for an IBM ESS and IBM APAR: OA05856 more than a year ago so
I was hoping someone had tried it.
Anyone willing to share their experience and answer a few questions?
Offlist
maybe?
Thanks.
Glenn Miller
1 - 100 of 118 matches
Mail list logo