I used Charles' Dachstein release for PPPoE
Get more info here <<< http://leaf-project.org/doc/bk04ch01.html>>>
Message: 1
Date: Wed, 19 Dec 2007 19:06:10 -0800 (PST)
From: plug bert <[EMAIL PROTECTED]>
Subject: [leaf-user] PPPoA and LEAF
To: leaf-user@lists.sourceforge.net
Message-ID: <[EMAIL
I guess I will have to buy a new board that takes PCI cards, mine are ISA and
just not fast enough. I had ipsec running, but never
used it.
-Original Message-
From: Eric Spakman [mailto:[EMAIL PROTECTED]
Sent: Wednesday, September 20, 2006 3:20 PM
To: Kevin
Cc: leaf-user
I had an old Pentium-166mhz system on the 3 meg line and it would run
everything. After the upgrade to 6 meg, I could not get more
than 4 meg max out of the leaf box. It was running a two floppy set up with the
Dachstein release.
What is the next pc configuration I need to get the full 6 meg? Co
How can I set the following rule to auto load when I have to reboot the
router? ie. where to input in the config files, mostly a newbie to Linux
ipmasqadm autofw -A -r tcp 65000 65000 -h 192.168.1.26
Currently , I have to use putty to log into the server and issue the command
to make it work. S
I use Charles' Dachstein - get the help and iso file from here
http://leaf-project.org/doc/guide/install-dachstein/ds-contents.html
1. PPPoE (Peter Nosko)
--__--__--
Message: 1
Date: Mon, 2 Jan 2006 20:21:08 -0800 (PST)
From: Peter Nosko <[EMAIL PROTECTED]>
Reply-To: Peter Nosko <[EMAIL
On Mon, 31 Jan 2005 17:33:29 +0100, Hans Ulrich Niedermann
<[EMAIL PROTECTED]> wrote:
> Kevin Kloet <[EMAIL PROTECTED]> writes:
>
> > I'm on a Bering uClibc 1.2 setup and I'm looking to find out what the
> > command is to release and renew an IP on this
Greetings,
I'm on a Bering uClibc 1.2 setup and I'm looking to find out what the
command is to release and renew an IP on this router. My net
connection is PPPoE.
It does not appear that the dhclient command is available on this
system and I have not been able to find an equivalent for this task
I have the following kernel and modules installed:
Kernel:
Linux version 2.2.19-3-LEAF ([EMAIL PROTECTED]) (gcc version 2.7.2.3) #1 Sat
Dec 1
12:15:05 CST 2001
Installed Modules:
ip_masq_vdolive 1180 0
ip_masq_user3708 0 (unused)
ip_masq_raudio 2980 0
ip_masq_
e 'way up there' range - I use like 45789
or something. Azureus is an excellent (best) bittorrent client that has
that capability.
On Sun, 2005-01-02 at 21:33 -0500, Kevin wrote:
> I am trying to tweak my Dachstein 2 floppy system to work best with
> Bit-Torrent. I found this on the
I am trying to tweak my Dachstein 2 floppy system to work best with
Bit-Torrent. I found this on the Bit-Torrent web site and am not sure how or
where to add:
Linux ipmasqadm
>From Andy Haninger:
ipmasqadm portfw -f (flushes all other rules.. optional)
ipmasqadm portfw -a -P tcp
d be appreciated, i'm not sure why it says there's
no device parport0, since it seems to initialize properly on boot-up.
thanks,
kevin.
---
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds o
I've been using bering for a while and more recently bering-uClibc.
I've been able to sort out my technical problems and the system works
very reliably for me.
however, due to my lack of linux prowess, i've never found out how to
do basic things that i'd take for granted in a commercial solution.
I am a bering user who switched to bering-uclibc a while ago. when i
did this, i was building a router for a buddy as well, so i set up the
new uclibc system using his computer and then cloned it onto my
system. his setup was problematic, and he abandoned it until recently
- and is now looking for
I checked and after loading the module, and making the changes to the
/etc/network.conf file, saved to disk and the work VPN works!!!
Thanks for the help, now I can work from home :)
-Original Message-
From: Kevin [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 20, 2004 9:07 PM
To
esday, April 20, 2004 7:41 AM
To: Kevin
Cc: [EMAIL PROTECTED]
Subject: Re: [leaf-user] IPSEC help needed....
Kevin wrote:
SNIP
Actually, I think you need a rule set and a module loaded.
I'm going to work under the assumption that you need to masquerade an
IPSec connection (ie: you're r
I am using Dachstein 1.02 and need IPSEC enabled to get the work VPN
software to work correctly. I do not see a module IPSEC that is loaded,
should I have one to make this work correctly?
Here are the modules loaded:
Linux version 2.2.19-3-LEAF ([EMAIL PROTECTED]) (gcc version 2.7.2.3) #1 Sat D
a little background information:
i am in the process of configuring and running a linux apache http
webserver from my house and i had a few questions concerning my LRP.
(eigerstein, basic configuration) the web server will host my web pages
for public viewing for now, and i will install a ftp
I am running a two floppy set and I have three files needed to cover both
floppies:
Disk 1
pkgpath.cfg
/dev/fd0u1440,/dev/fd1u1440
syslinux.cfg
display syslinux.dpy
timeout 0
default linux
append=load_ramdisk=1 initrd=root.lrp initrd_archive=minix
ramdisk_size=16384 root=/dev/ram0 boot=/dev/fd0u
I was curious, so I tried to hit my firewall without making any changes to
its current state.
I used a program call NetLab 1.4, freeware for windows. It has a time snyc
function I use to keep my clocks updated.
When I hit the main time server that worked through the firewall -
salmon.maths.tcd.ie
e running under Dachstein. I don't want to move to ipsec because of the
overhead.
If anyone can offer any assistance, insight, pointers it would be greatly
I wqas able to install Taxcut on a WIN98 box, and it worked through the
firewall.
The problem was with a WinXP Pro laptop from work...
thanks for all sugggestions
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + L
dor or way to e-file my
taxes.
-Original Message-
From: Ray Olszewski [mailto:[EMAIL PROTECTED]]
Sent: Saturday, February 08, 2003 3:13 AM
To: Kevin; [EMAIL PROTECTED]
Subject: Re: [leaf-user] Help with Taxcut uploading
At 10:19 PM 2/7/03 -0500, Kevin wrote:
>I am having problems with uploading
I am having problems with uploading TaxCut. Help desks states I have to
disable the firewall to have it complete. Does anyone have a quick way to
disable the firewall to allow the upload then turn the firewall back on?
Running Dachstein firewall - two floppy disk system
thanks for any help or dir
PC's, home stack shows
Broadcast network, work pc shows Hybrid
I am beginning to think WinXP does not really support two networks. Did I do
something wrong?
-Original Message-
From: Charles Steinkuehler [mailto:charles@;steinkuehler.net]
Sent: Thursday, October 24, 2002 12:02 AM
while at
home, so I can use the laptop on the internet.
Thanks
-Original Message-
From: Richard Doyle [mailto:rdoyle@;islandnetworks.com]
Sent: Wednesday, October 23, 2002 6:00 PM
To: Kevin
Cc: [EMAIL PROTECTED]
Subject: Re: [leaf-user] Dachstein work laptop on home network using
WinXP
On
I have a fully working network using DHCP, Dachstein 1.02 two floppy
version.
Work just gave me a laptop with WinXP installed. In the documents, I see
where you can have two ip stacks and WinXP will use the correct stack.
Problem is work and home networks use DHCP, work also uses WINS with a
stati
Lynn,
This is exactly what I needed. Works perfectly now! Thank you kindly.
-Kevin
> Well, this is more like what you are looking to do with ProxyArp.
> You should get a good start off of this link anyway:
>
> http://www.casano.com/lrp/proxy_arp.html
>
> Just kill the pri
rt 80 forwarding to computer 3, and port 22
forwarding to computer 2.
Would it be better to just have 216.158.54.224, .225, and .226 set as
aliases for the leaf box, and use the INTERN_SERVERS to forward same ports
to different internal IPs depending on the external ip?
Thanks,
Kevin
--
port 22.
Does this clarify things a bit? Am I totally off, or going in the right
direction?
Thanks,
Kevin
> Several things. First of all, the DMZ scripts are designed to create a DMZ
> network...a third network for server (and other publicly visable) systems
> that is completely sep
going through the same hub, if that makes any sort of
difference.
Can anyone point out where I am going wrong?
Thanks,
Kevin
--
(kevin mudrick) ([EMAIL PROTECTED]) (www.bleachedwhale.com)
pgp key available at http://www.bleachedwhale.com/kevinGPG.asc
Despair: It's always darkest j
I use the version from here:
http://leaf.sourceforge.net/pub/oxygen/packages/psentry.lrp
version 1.0 with DS floppy. I could not get any version higher to work
correctly with this or Eiger
From: Michael Leone <[EMAIL PROTECTED]>
To: LEAF-User <[EMAIL PROTECTED]>
Date: 27 Jan 2002 18:35:47 -050
I was using Junkbuster from the Junkbuster web site
(http://www.mwheldon.freeserve.co.uk/documents/Jbuster.htm ) with one
problem, it would not load on a reboot. I built another set of (2) floppy
disks, added the version found below and rebooted. Well Junkbuster loaded
the first boot, however I co
I get the digest.
I worked for AT&T in US launching the @Home service. Shawcable never put
speed restrictions on the head end routers as the US based service. I went
out to the @Home SF office once and was involved in the new speed caps
placed on the @Home launches. I did a test in Jefferson
not to brag on DSL...I get 1.55 meg downloads from the local newserver with
a P2-75 with 32 meg ram and dual floppy
of course, the telco put a dslam less than 3000 yards from the neighborhood
last year :)
Date: Wed, 16 Jan 2002 13:14:06 -0600
From: Robert Chambers <[EMAIL PROTECTED]>
To: Kenne
If you have not installed the router and still us a straight connection of
pc to modem to internet...open a DOS window and PING MAIL. Your will see the
IP address and the FQDN to input into your mail program. Use one or the
other. I prefer the IP so if DNS goes down you still get mail.
From: "S
I get this with the df command on the bad floppy:
amberton: -root-
/mnt # df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/ram016208 4892 11316 30% /
/dev/ram1 810287 8015 1% /var/log
/dev/fd1u1680 1664
I get this error message on the web page when backing up one program only
(junkbuster):
Jan 3 10:39:08 amberton kernel: end_request: I/O error, dev 02:2d (floppy),
sector 893
The backup scripts do not mention any problems writing to the floppy.
I have replaced the floppy disk 4 times and get th
I have used JunkBuster version 2.0.1 on my system for over one year. Great
piece of proxy and blocking software.
Under Eiger, it would not auto load due to a missing SU command. I was never
able to get this to work, so I had to manually start by ssh into the box and
issue "junkbuster /etc/junkbus
the docs and it might help others.
-Original Message-
From: Kevin [mailto:[EMAIL PROTECTED]]
Sent: Sunday, December 23, 2001 8:34 PM
To: Michael Leone; LEAF-User
Subject: RE: [Leaf-user] PPPoP DachStein Firewall going to two disk
Thanks for the tip on the multidisk support!!!
It seems I
:34 PM
To: Kevin
Cc: LEAF-User
Subject: RE: [Leaf-user] PPPoP DachStein Firewall going to two disk
On Sun, 2001-12-23 at 19:21, Kevin wrote:
> Charles - once I added the multi298.lrp and rebooted, the backup script is
The multi298.lrp? Why are ou loading this ? Eiger (and later versions)
h
01 PM
To: #LEAF ListSERV
Subject: RE: [Leaf-user] PPPoP DachStein Firewall going to two disk
Dear Kevin,
Yes, you *can* boot from a CD; but you'll need a SCSI controller with a
BIOS
chip (or support for AIC-78xx or 53c8xx in the mobo BIOS) and a SCSI CD/ROM
deck. There'
I am having all sorts of problems. I tried to upgrade from Eiger2Beta v4
with PPPoP to the new Dachstein.
I was running a two floppy set-up because I needed ssh to admin the box.
I have the single floppy up and running as designed, however I can not get
the multi294.lrp to load so I can backup r
advertising ;-)
-Kenneth Hadley
- Original Message -
From: "Kevin Kropf" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; "Leaf-User (E-mail)"
<[EMAIL PROTECTED]>
Sent: Tuesday, December 18, 2001 5:32 PM
Subject: RE: [Leaf-user] CPU loading mo
2001 21:58 schrieb Kevin Kropf:
> Is anyone aware of a CPU monitor for LRP that I could use to
> see what my box is doing?
lrpStat from
http://leaf.sourceforge.net/devel/hejl
Read there about using the C-program lrpStat instead of stat.sh, which is
used in weblet from dachstei
Is anyone aware of a CPU monitor for LRP that I could use to
see what my box is doing?
Thanks.
Kevin
___
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
Any thoughts as to why I do not get a more detailed output on
dachstein-rc2-1680.exe?
# ps aux
PID Uid Stat Command
1 root Sinit
2 root S[kflushd]
3 root S[kupdate]
4 root S[kswapd]
5 root S[keventd]
981 root S/usr/sbin
Just a note of experience, to get the scripts to pick up the ip address
assigned by the pppoe server I had to put a 15 second delay after adsl-start
in network.conf. This was on EigerStein2BETA.exe.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Charl
Thanks for your trouble. I will read up on it and perhaps give it a try.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of David
Douthitt
Sent: Wednesday, December 12, 2001 1:35 PM
To: LEAF Users List
Subject: [Leaf-user] Squirm and SquidGuard
I tried
Squirm?
Thanks.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of David
Douthitt
Sent: Wednesday, December 12, 2001 11:45 AM
To: LEAF Users List
Subject: Re: [Leaf-user] Squid package??
Kevin Kropf wrote:
> I poked around a bit and found that the Oxy
I poked around a bit and found that the Oxygen version does not include
squidGuard. How hard would it be to put up the latest version that includes
squidGuard?
Kevin
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of David
Douthitt
Sent: Wednesday
on this.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of David
Douthitt
Sent: Tuesday, December 11, 2001 5:32 PM
To: LEAF Users List
Subject: Re: [Leaf-user] Squid redirect dachstein floppy
Kevin Kropf wrote:
> I have Squid running on dachstein-rc2-1
I have Squid running on dachstein-rc2-1680.exe and would like to redirect
all internal port 80 requests to the default Squid port of 3128 on the LRP
box.
I have read through the archives and found very little of use.
What is the best way to do this?
Thanks & Regards,
K
Try:
http://leaf.sourceforge.net/devel/cstein/files/kernels/Dachstein-normal/modu
les/net/3c59x.o
Kevin
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Reginald R.
Richardson
Sent: Monday, December 10, 2001 10:27 PM
To: Mailing List __Leaf ([EMAIL
I am running the Eiger2Beta v4 with PPPoP from Ken on a two floppy set-up. I
have added and upgraded a few packages to this original single disk. I had
to recreate both floppy disk over the weekend. I am running the following
packages:
NameVersionDescription
===-==
after the LRP is booted and it is OK. The
> $EXTERN_IP ends up getting defined as 192.168.254.254 which messes up the
> port forwarding stuff.
> The portion of network.conf is below. How could I remedy this?
> Thanks,
> Kevin
>
>
>
###
$EXTERN_IP after the LRP is booted and it is OK. The
$EXTERN_IP ends up getting defined as 192.168.254.254 which messes up the
port forwarding stuff.
The portion of network.conf is below. How could I remedy this?
Thanks,
Kevin
s image to connect to a Bell ADSL modem on
startup I had to create a file called /etc/ppp/firewall-masq and back it up
with the ppp stuff.
Thanks & Regards,
Kevin
___
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
given it's size?
-Original Message-
From: Ray Olszewski [mailto:[EMAIL PROTECTED]]
Sent: Monday, December 03, 2001 10:36 AM
To: [EMAIL PROTECTED]; Leaf-User (E-mail)
Subject: Re: [Leaf-user] Ram disk full on EigerStein2BETA.exe
At 10:09 AM 12/3/01 -0800, Kevin Kropf wrote:
>
I have a full ram
disk after 3 days, and I think it may be from the file
below?
What is it and why
is it so large? I seams to contain a bunch of control
characters.
# dir -l
w*-rw-r- 1
root
root 2764800 Dec 3
10:10 wtmp
Thanks
Kevin
Has anybody out their seen the following, hits on port 53? Their is about
100 entries like this in a few seconds then nothing? This only happens now
and again, once or twice a week. I am using EigerStein2BETA.exe.
Sample:
Dec 1 14:48:57 kc_firewall kernel: Packet log: input DENY eth0 PROTO=
Is this available in EigerStein2BETA.exe? I did not see this variable in
the network.conf file. Can I just add it?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Charles
Steinkuehler
Sent: Thursday, November 29, 2001 6:45 AM
To: [EMAIL PROTECTED]; [EM
thanks, I will look into this later this week
-Original Message-
From: Robert Williams [mailto:[EMAIL PROTECTED]]
Sent: Monday, November 26, 2001 2:43 AM
To: Kevin; [EMAIL PROTECTED]
Subject: RE: [Leaf-user] The script to send log files
HI Kevin,
I am just about out of ideas. If
tc/rcS.d/S39network. It may be overwritten!
search TEST
nameserver 192.168.1.254
nameserver 205.152.0.20
nameserver 205.152.0.5
nameserver 127.0.0.1
-Original Message-
From: Charles Steinkuehler [mailto:[EMAIL PROTECTED]]
Sent: Sunday, November 25, 2001 5:05 PM
To: Ke
address, so I am
clueless as to the problem.
maybe my isp does not like this syntax, any thoughts or next step help?
thanks
-Original Message-
From: Kevin [mailto:[EMAIL PROTECTED]]
Sent: Sunday, November 25, 2001 12:15 AM
To: [EMAIL PROTECTED]; Robert Williams
Subject: RE: [Leaf-user] The
.
-Original Message-
From: Robert Williams [mailto:[EMAIL PROTECTED]]
Sent: Saturday, November 24, 2001 9:39 PM
To: [EMAIL PROTECTED]
Subject: RE: [Leaf-user] The script to send log files
Hi Kevin,
Looking at the errors that you are getting it looks like a DNS
problem to me. Try and ping your
Where can I find a download of Dachstein RC5 PPPoE disk image please.
Thanks & Regards,
Kevin
___
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
I was told by Shaw, which is equivelent to @home in Canada to do the power
down reset as such to my Terayon modem:
1) unplug the cable connection to the modem, wait a moment.
2) power down the modem
3) reconnect the cable
4) power up the modem.
Good luck,
Kevin
-Original Message-
From
Does anyone have a working Dachstien ppOe image?
Or should I wait for the next rev as I thought I read that Charles may be
releasing this version?
Thanks & Regards,
Kevin
Kropf Consulting
668 Bay Road, RR 1, Mill Bay BC V0R 2P0
250.733.2550[EMAIL PROTECTED]
http://members.sha
That did the trick, however on a side note the pci-scan must be loaded
before the other modules. (8390 & ne2k-pci)
Thanks for the quick reply.
Great job on the release!
Kevin
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Charles
Steinkuehler
been using EigerStein2BETA.exe with the same hardware and it is has
been working fine.
Thanks & Regards,
Kevin
___
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
Has someone out there created the latest version of PPPoE
from Roaring Penguin for the LRP EigerStein2BETA.exe image?
Are there instructions a Linux newbie could follow to create
it myself perhaps.
Thanks & Regards,
Kevin
___
Leaf-user mai
I updated my /etc/ipfilter.conf file for the DNS flood script protection as
follows:
# Added by Charles Steinkuehler to allow more flexible internal server setup
# A function to configure the filters for firewalling
ipfilter_firewall_cfg () {
local ADDR
local DEST
local NET
#
# set default polic
Thanks Victor!
Date: Sat, 07 Jul 2001 16:39:29 -0700
From: Victor McAllister <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: Re: [Leaf-user] RE: Help with DNS error logs on Eiger2Beta with
PPPoP
Reply-To: [EMAIL PROTECTED]
# > /var/log/messages
will make the file zero bytes lo
Thanks for the all the help and the extra script for the dns_flood ips
how would I clear the message log that I see when I use the weblet.lrp
package of the denied packages?
the only way I know is to reboot
thanks
___
Leaf-user mailing list
[EM
: 7
Date: Thu, 5 Jul 2001 11:16:47 -0700 (PDT)
From: "Scott C. Best" <[EMAIL PROTECTED]>
To: Kevin <[EMAIL PROTECTED]>
cc: [EMAIL PROTECTED]
Subject: RE: [Leaf-user] Help with DNS error logs on Eiger2Beta with PPPoP
Reply-To: [EMAIL PROTECTED]
Kevin:
If you
: Wednesday, July 04, 2001 2:53 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: [Leaf-user] Help with DNS error logs on Eiger2Beta with
PPPoP
Kevin:
Heya. Sorry for the late reply: as you can see in the
archives, there was a big discussion regarding unsolicited TCP
packets to
-Original Message-
From: Kevin [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 04, 2001 11:51 AM
To: Leaf-User@Lists. Sourceforge. Net
Subject: Re: [Leaf-user] Help with DNS error logs on Eiger2Beta with
PPPoP Attn; Charles or Victor
HELP!!
I tried to search via Geocrawler for DNS
440 440 364 S 0 0.0 1.4 0:00 cron
-Original Message-
From: Kenneth Hadley [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 03, 2001 4:22 PM
To: Kevin
Cc: [Leaf-user]
Subject: Re:
http://leaf.sourceforge.net/devel/khadley/
where there is a copy available, let me know what kind
I need some help in not logging the following DNS error types:
Packet log: input DENY ppp0 PROTO=6 64.37.200.46:41613 66.20.176.251:53 L=44
S=0x00 I=0 F=0x T=242 (#42)
I am using the Eiger2beta with PPPoP from Ken on a two floppy disk set-up.
I have a dsncache.lrp module running and have th
[EMAIL PROTECTED]
On Tue, 26 Jun 2001, Kevin wrote:
> I am using the eiger beta 2 with PPPoP from Kenneth Hadley version 0.4
>
> I have a dual boot floppy with dns, dhcp, weblet, sshd and port sentry
> active and running
>
> When I open mIRC, I get a message stating ident is not active
2 with PPPoP help please
Reply-To: [EMAIL PROTECTED]
On Tue, 26 Jun 2001, Kevin wrote:
> I am using the eiger beta 2 with PPPoP from Kenneth Hadley version 0.4
>
> I have a dual boot floppy with dns, dhcp, weblet, sshd and port sentry
> active and running
>
> When I open mIRC, I get
I am using the eiger beta 2 with PPPoP from Kenneth Hadley version 0.4
I have a dual boot floppy with dns, dhcp, weblet, sshd and port sentry
active and running
When I open mIRC, I get a message stating ident is not active. When I try
different servers, most inform me to install ident.
I have t
have someone look at my settings to see what might be
wrong?
-Original Message-
From: Scott C. Best [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 25, 2001 9:20 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: [Leaf-user] Ram Disk size and ipmasqadm help
Kevin:
Not so
ommend not
having
ttyp0 enabled in /etc/securetty.
Perhaps you did not add sshd to /etc/hosts.allow
sshd: 192.168.1.1 if you are only allowing logins from internal network
single machine
sshd: 192.168.1.0/255.255.255.0 for internal network
not recommended sshd: ALL
sshd:
Kevin wrote:
> a
I have 32 meg ram in a p2 75 mhz box with two floppy's. I have the ram disk
set up for 16 meg at the present time.
Does LRP need the other 16 meg of memory to run the programs or do they run
in the 16 meg?
I need to add an ipmasqadm rule for IRC to see if that is the problem. I
have looked at e
-User@Lists. Sourceforge. Net" <[EMAIL PROTECTED]>
Subject: Re: [Leaf-user] Serial Console HOWTO problems - now sshd issues
Reply-To: [EMAIL PROTECTED]
On Mon, 25 Jun 2001, Kevin wrote:
> Sorry so late, tried everything I could to get this working.
>
> I have now dropped and tr
: [Leaf-user] Serial Console HOWTO problems
Reply-To: [EMAIL PROTECTED]
At 03:15 PM 6/24/01 -0400, Kevin wrote:
>Can anyone help share some experience in getting this to work?
>
>http://lrp.steinkuehler.net/Documentation/LRP-Serial-HOWTO.txt
>
>is where I retrieved the docs
>
Can anyone help share some experience in getting this to work?
http://lrp.steinkuehler.net/Documentation/LRP-Serial-HOWTO.txt
is where I retrieved the docs
I can not get step one of echo'ing from the # LRP prompt to the pc with
hyper term open and connected.
I was trying to get a dual fl
thanks Ray, I will try that and see how it goes
I will report back to the list for the archives as I did not find anything
before asking..
winmail.dat
If I follow the instructions as posted, the firewall will not allow me to
access anything on the internet.
I am running the eiger3beta with PPPoP from Ken.
I was curios as to why my IRC will not work with the current set-up so I
tried Echowall tonight. After 4 hours, still no luck
I made a copy
I can not get the IDENT to work correctly with mIRC and think I have
something set incorrectly. Here are the packages I have installed pulled
from the web page interface as I disconnected the monitor and keyboard. Any
help on getting this to work? Or what else do I need to post?
aDSL connection
91 matches
Mail list logo
