Robert Anderson wrote:
On 12/27/05, *John P. Mitchell* [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
MythTV Users,
I have a .15 MythTV backend and two .15 XBox MythTV frontends. The
systems is used heavily by four individuals on an almost hourly basis
and the system
This torrent has been updated recently. The instructions on the page and the
README file included in the torrent explain the installation and
post-installation steps. But bassically yes, it is almost that easy.
Certainly easier than the alternatlve.. that's the point after all.
OK, thanks for
Hello
At http://svn.mythtv.org/trac/wiki
I see the following.
If you're looking for anonymous subversion
access, use the following commands to grab the latest code:
svn co http://svn.mythtv.org/svn/trunk/mythtvsvn co http://svn.mythtv.org/svn/trunk/mythpluginssvn co
Hello
I am running knoppmyth R5A26. I have a 4 way diseqc
switch.
LNB1 is astra 19.2 LNB2 is astra 28.2 and LNB3 is
hotbird 13.0.
If I run mythsetup I am not able to scan channels at
LNB 2 3.
I tried with a Technotrend Budget and a KNC1 satellite
card.
If I bypass the diseqc switch
You'd be glad to find a README-file in the root of your dir after you
retrieved the source. The top of the file says BUILD/CONFIGURATION
INSTRUCTIONS..
But I think you'll be alot happier with a pre-compiled version of Myth,
try ubuntu linux which has packages of myth in its repository
But I think you'll be alot happier with a pre-compiled version of Myth,
try ubuntu linux which has packages of myth in its repository (apt-get
install mythtv)
Or install Fedora Core and follow Jarod Wilson's excellent guide which
has helped out many newbees in getting MythTV up and running.
Hello all,
Just did a bit of channel hopping last night and just now checked out
Recorded Programs on MythWeb and found that the backend recorded every
channel hop I made, something like 30 enteries in the Recorded
programs about 1 or 2 minutes each - depends on how long I watched the
John P. Mitchell wrote:
obscure information. wrote:
will it be possible for me to add a second PVR-150 connected to an
identical CFT2254 and have them change channels independently via lirc?
You should be fine but you will need two SEPARATE instances of
lircd running. Also, my
I ended up blowing away that system and switching to the FC4 build, as FC4 just came out as I was having that problem).I did not have any issues with FC4, AND there were options that were not available to me when I used Gentoo.
I would assume that the build of MythTV installed by gentoo is not the
Richard Reiner wrote:
I've got a frontend-only box which spins down its disk once it has
booted. I've done all the things necessary to make this work, e.g.
disabling swap and syslogd, putting ntpd's drift file on a tmpfs
partition, etc.
This works fine -- there are never any spontaneous disk
Wim Fokkens wrote:
At http://svn.mythtv.org/trac/wiki I see the following.
If you're looking for anonymous subversion access, use the following
commands to grab the latest code:
svn co http://svn.mythtv.org/svn/trunk/mythtv
svn co http://svn.mythtv.org/svn/trunk/mythplugins
svn co
Piers Kittel wrote:
Just did a bit of channel hopping last night and just now checked out
Recorded Programs on MythWeb and found that the backend recorded
every channel hop I made, something like 30 enteries in the Recorded
programs about 1 or 2 minutes each - depends on how long I watched
I'm trying to get into rails programming, so I wanted to switch my web
server over to lighttpd. I've got rails running, and php seems to work
(phpmyadmin functions properly).
In order to get htaccess files read, I installed htscanner. I don't
know if it's working properly or not... but I don't
At one point, I thought this machine might not be
behind a separate firewall. But now it looks like it
is going to be after all.
Thanks,
Kirk
--- John Andersen [EMAIL PROTECTED] wrote:
On 12/27/05, Doug Bunger [EMAIL PROTECTED]
wrote:
You turn off the firewall during instalation,
because
Michael T. Dean wrote:
Piers Kittel wrote:
Just did a bit of channel hopping last night and just now checked out
Recorded Programs on MythWeb and found that the backend recorded
every channel hop I made, something like 30 enteries in the Recorded
programs about 1 or 2 minutes each - depends
Greg Estabrooks wrote:
schedule, etc. It would be an absolute ballache to have to delete all
the mini recordings.
You don't have to. Myth will auto expire them after I think a configurable
period of time( a day? )
Can you auto expire them after a second?
My machine is running short
Wim Fokkens wrote:
Hi Phill
Ok I did not give enough information.
I am running knoppmyth R5A26 at this moment and want to upgrade to the
latest svn.
How do I do this.
Just a suggestion, if you can't figure out how to do this, then you
shouldn't be doing it.
Wait for the next
Search the forums. Are we really talking about this again?
On Dec 28, 2005, at 7:11 AM, Chris Picton wrote:
Greg Estabrooks wrote:
schedule, etc. It would be an absolute ballache to have to
delete all the mini recordings.
You don't have to. Myth will auto expire them after I think a
Chris Picton wrote:
Greg Estabrooks wrote:
schedule, etc. It would be an absolute ballache to have to delete
all the mini recordings.
You don't have to. Myth will auto expire them after I think a
configurable period of time( a day? )
Can you auto expire them after a second?
My
Aha.
Fair enough.
Thanks very much for your comment! Clears up a lot of things. Makes a
lot of sense. Was away for the last 4 months so this being included
confused me somewhat :)
Cheers - Piers
Michael T. Dean wrote:
Piers Kittel wrote:
Just did a bit of channel hopping last night
You don't have to. Myth will auto expire them after I think a configurable
period of time( a day? )
Can you auto expire them after a second?
I don't think so. Can't remember the minimum off hand, either a minute
or more likely a day.
My machine is running short on space. I am always
On 12/28/05, Phill Edwards [EMAIL PROTECTED] wrote:
This torrent has been updated recently. The instructions on the page and the README file included in the torrent explain the installation and
post-installation steps. But bassically yes, it is almost that easy. Certainly easier than the
Ello all ,
Im thinking of adding a DVB-T card to my analog UK sky mythtv setup. Im
also thinking of using the provider topuptv.com to give me extra
channels.
Im guessing I need to find a DVB-T card that has space for a viweing
card / cam or whatever it is they use. Has anyone used such a piece
On 12/28/05, Robert Anderson [EMAIL PROTECTED] wrote:
On 12/28/05, Phill Edwards [EMAIL PROTECTED]
wrote:
This torrent has been updated recently. The instructions on the page and the README file included in the torrent explain the installation and
post-installation steps. But bassically
I was recording a news broadcast for a friend and needed to crop out just the article she was looking for. I figured I should be able to use the cutpoint editing to do that without any problems.However - The myth editing program has an intelligent feature where it determines if the point you
On 12/28/05, Johan Venter [EMAIL PROTECTED] wrote:
Chad wrote:
Hello!
I'm looking for an easy-to-use website that will explain the
differences of the nvidia cards to me. MythTV says I need a Geforce 4
or better to do XvMC, but I've got an MX440 and it barely (nearly
unusably) does
I had to modify the xmamerc file and it worked fine after that.
Mary,Try running the xmame cmdline by itself and you should see the
problem. The cmdline is in your error message.rgds,andrewOn 12/27/05, Mary Strimel [EMAIL PROTECTED] wrote: hi,
I compiled and installed the latest mythgame plugin
Does anybody in the list is using mythTV in a latinamerican country,
or knows somebody who does?
If so, which source of TV listings are you/they using?
I'd appreciate any information.
Cheers,
Julian
___
mythtv-users mailing list
mythtv-users@mythtv.org
I'm shocked that I have not heard any answers to this this question. So
I'm warming the thread.
I'm also going to ask what I believe is a simpler question. I did
verify that my keyboard is not broken by doing Ctrl+Alt+F1 to get to a
terminal screen (with a cool looking KnoppMyth LCD TV border
On 12/28/05, Richard Bronosky [EMAIL PROTECTED] wrote:
I'm shocked that I have not heard any answers to this this question. So
I'm warming the thread.
I'm also going to ask what I believe is a simpler question. I did
verify that my keyboard is not broken by doing Ctrl+Alt+F1 to get to a
As always, the answer is it depends. Generally, try ctrl-alt-F7 or
alt-F7. If that doesn't work, try F8 instead, or F9. You can also try
issuing the command chvt 7, chvt 8 or chvt 9.
Richard Bronosky wrote:
I'm shocked that I have not heard any answers to this this question. So
I'm
I've been using Myth for years, first with a Matrox Marvel G200 and later
with a generic bt878 card and now I'm planning to upgrade to a newer capture
card. I'd like to be able to add a second capture device later and I only
have 1 slot free (actually 2 but I'm planning on a better sound card for
I'm not sure I follow ... do you mean what channel the cable box is transmitting on?On 12/28/05, Michael T. Dean
[EMAIL PROTECTED] wrote:John P. Mitchell wrote: obscure information. wrote:
will it be possible for me to add a second PVR-150 connected to an identical CFT2254 and have them change
I tried that, but I didn't get any result. In
addition I also tried Ctrl+Alt+(F[2-6]) and did not get new terminals
with a login prompt as I had expected.
Ideas? Can anyone confirm conflicting or congruent results?
Andrew Close wrote:
On 12/28/05, Richard Bronosky [EMAIL PROTECTED] wrote:
Ray wrote:
I've been using Myth for years, first with a Matrox Marvel G200 and later
with a generic bt878 card and now I'm planning to upgrade to a newer capture
card. I'd like to be able to add a second capture device later and I only
have 1 slot free (actually 2 but I'm planning on a better
I need help generating (or finding an existing) lircd.conf for a
Motorola DSR205 or DSR315 with a codeset other than 000.
Now for some background:
I have multiple Motorola satellite receivers (provided by Starchoice in
Ontario, Canada) that are hooked up to multiple Hauppauge PVR-150's. I'm
obscure information. wrote:
On 12/28/05, *Michael T. Dean* [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
John P. Mitchell wrote:
obscure information. wrote:
will it be possible for me to add a second PVR-150 connected to an
identical CFT2254 and have them
Hello there,
Curious if anyone had reprogrammed a JP1 capable remote, such as the One
For All URC-6131n, to provide for more keys than is on the original
Microsoft Remote. Using remote code 0522, I can easily get all the
original xbox buttons duplicated, but I hoped for more functionality.
CTD wrote:
I started down the path of attempting to run irrecord, but I get the
following error:
#xbox:~# irrecord test
#irrecord - application for recording IR-codes for usage with lirc
#Copyright (C) 1998,1999 Christoph Bartelmus([EMAIL PROTECTED])
#irrecord: could not init hardware (lircd
On Wednesday 28 December 2005 09:44, Chris Picton wrote:
Michael T. Dean wrote:
Piers Kittel wrote:
Just did a bit of channel hopping last night and just now checked out
Recorded Programs on MythWeb and found that the backend recorded
every channel hop I made, something like 30 enteries
I can't speak for the PVR-500. But, I just traded out my Plextor for
a PVR-150. The MPEG4 format was more trouble than it was worth for
me. I could not get it to play on the xbmcmythtv front end - even
with the patched mplayer. I also had some performance problems on my
machine because its
I thought that might be the case, so I killed the lircd pid. After that
I attempted to run irrecord test again, but the same error msg was
returned.
Thanks
Mike
Boleslaw Ciesielski wrote:
CTD wrote:
I started down the path of attempting to run irrecord, but I get the
following error:
Hi,
I modified my channel settings so that I had a logo for each channel.
These gets displayed during the looking at EPG and also when changing
channels (they display), including when I hit the info button.
The problem I am faced with currently is the only frontend to honour
this is the frontend
In order to get htaccess files read, I installed htscanner. I don't
know if it's working properly or not... but I don't get the db env
variable error anymore. In fact, I don't get anything but a white
screen when the page has loaded.
you need something equivalent to apache's mod_env and
Michael Fox wrote:
Hi,
I modified my channel settings so that I had a logo for each channel.
These gets displayed during the looking at EPG and also when changing
channels (they display), including when I hit the info button.
The problem I am faced with currently is the only frontend to
The documentation on the lirc site is not as crystal clear as it could be
or should be.
1) Your module has to match the IR receiving hardware. In my case I
use the lirc_imon module. The remote is handled later on. The module name
is not the remote name.
2) You need to compile using the
On 12/29/05, Kevin Kuphal [EMAIL PROTECTED] wrote:
The path to the logos is stored in the database in the table for the
channels (IIRC). This path needs to be present on all frontends. I
have accomplished this by placing the icons in a subfolder of my media
share that I mount on each of my
On 12/28/05, Jeff Simpson [EMAIL PROTECTED] wrote:
What
I wanted to do was place a cutpoint here anyway since the video I was
cropping to was only 5-10 seconds long for parts. Does that option make
sense to add?
I'd like to see that option too. If no one else picks it up, I'll take a look at the
Is anyone else having problems with Zap2it? I'm getting 500
internal service error. I tried to log into labs.zap2it.com to
see if I accidentally let my subscription lapse, and I'm getting page
not found after entering my log in info.
Someone had mentioned in November they had to rebuild myth
I'm seeing the same thing. I would say the site is screwed up. Other pages give Oracle errors.On 12/28/05, Ryan Steffes
[EMAIL PROTECTED] wrote:Is anyone else having problems with Zap2it? I'm getting 500
internal service error. I tried to log into labs.zap2it.com to
see if I accidentally let my
On 12/28/05, Abre Chase [EMAIL PROTECTED] wrote:
I can't speak for the PVR-500. But, I just traded out my Plextor for
a PVR-150. The MPEG4 format was more trouble than it was worth for
me. I could not get it to play on the xbmcmythtv front end - even
with the patched mplayer. I also had
Try
mythtv -c mythfilldatabase --quiet
If that doesn't work you need to run
mythtv-setup
and check your channel settings to make sure that zap2it is setup
right. Check the docs on mythtv.com and search for zap2it you'll get a
lot more detail there.On 12/27/05, David R Robison [EMAIL PROTECTED]
Here's the deal - I can't seem to get HD playbook to look quite right when there is significant motion. I'm running FC4 via Jarod's guide from about a month ago. Nvidia 6600GT with an AMD64 3800+ and 1T raid 5 sata drives. When I playback HDTV w/o xvmc, cpu is about 50-60 %, about 20% with. I've
This will work fine. You will need to make two copies of your Channel change script.
I have changechannel and changechannel2 and in the script specify which
port they control eg. /dev/ttyS0 or /dev/ttyS1. The myth tv setup
program already allows for specifying a separate program to control
channel
Hi...
By accident I overlooked an drop table clause when I wanted to reload
some database info. Unfortunally, at the same time, I was trying to load
data in from a previous version, so now I have a table with a missing
row, according to mythbackend log.
Any chance that I can get one to log
Hi...
By accident I overlooked an drop table clause when I wanted to reload
some database info. Unfortunally, at the same time, I was trying to load
data in from a previous version, so now I have a table with a missing
row, according to mythbackend log.
Any chance that I can get one to log
First of all, I'm a newbie with mythtv. I've got it running for the
purposes of watching TV, but I haven't tried to record anything yet.
I'm using mythfilldatabase to populate the database from datadirect.
But right now, I've got my PVR-500 plugged directly into the cable
*without* the set-top
On 12/28/05, Cymen Vig [EMAIL PROTECTED] wrote:
On 12/28/05, Michael Haan [EMAIL PROTECTED] wrote:
Here's the deal - I can't seem to get HD playbook to look quite right when there is significant motion.I'm running FC4 via Jarod's guide from about a month ago.Nvidia 6600GT with an AMD64 3800+ and
Kim B. Nielsen wrote:
Any chance that I can get one to log into their sql server and make an
'describe oldrecorded'?
Or better yet, point me to the sql expression that creates the table,
because i can't seem to find it...
The version of myth is 0.18.1
CREATE TABLE `oldrecorded` (
Boleslaw Ciesielski wrote:
Kim B. Nielsen wrote:
Any chance that I can get one to log into their sql server and make
an 'describe oldrecorded'?
Or better yet, point me to the sql expression that creates the table,
because i can't seem to find it...
The version of myth is 0.18.1
CREATE
On 12/28/05, MagicITX [EMAIL PROTECTED] wrote:
I'm seeing the same thing. I would say the site is screwed up. Other pages give Oracle errors.On 12/28/05, Ryan Steffes
[EMAIL PROTECTED] wrote:Is anyone else having problems with Zap2it? I'm getting 500
internal service error. I tried to log into
Here's how to use the keyboard for control of the mouse pointer:
http://www.faqs.org/faqs/x-faq/part2/section-19.html
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
I have a question concerning the recent changes in LiveTV
around the Ringbuffer. I'm very concerned that without significant hardware
changes on my part I'll not be able to ever upgrade to the newer MythTV
versions. This is based on what I've seen of the changes so far. Let me
explain.
What about getting a HDTV hardware-based encoder that can take component in?You could then go from the cable box via component to the encoder in the computer and have DVI or component going from the computer to your TV. Use LIRC and a IR-blaster to control your cable box.
I, personally am
On 12/28/05, Jason Weinstein [EMAIL PROTECTED] wrote:
What about getting a HDTV hardware-based encoder that can take component in?
There just aren't any commercially available.
You
could then go from the cable box via component to the encoder in the
computer and have DVI or component going from
On 12/29/05, Ryan Steffes [EMAIL PROTECTED] wrote:
On 12/28/05, MagicITX
[EMAIL PROTECTED] wrote:
I'm seeing the same thing. I would say the site is screwed up. Other pages give Oracle errors.On 12/28/05, Ryan Steffes
[EMAIL PROTECTED] wrote:Is anyone else having problems with Zap2it? I'm
When you set up you Zap2It lineup, there is a screen that gives you the
option to select/deselect individual channels in your lineup.
It sounds like you need 2 separate lineups defined, one for digital
cable and one for analog cable. Define the two lineups at Zap2It,
then run mythtvsetup and
Alexander Petkov wrote:
Here's how to use the keyboard for control of the mouse pointer:
http://www.faqs.org/faqs/x-faq/part2/section-19.html
Ratpoison is a window manager that is designed to not need the mouse (
hence ratpoison )
Here is a repost of a message I sent some time ago.
Chris == Chris Ribe [EMAIL PROTECTED] writes:
Chris On 12/28/05, Roland Roberts [EMAIL PROTECTED] wrote:
I'm using mythfilldatabase to populate the database from
datadirect. But right now, I've got my PVR-500 plugged directly
into the cable *without* the set-top box. This
I did this! I dont have the xbox hooked up anymore, but here are some of the files I had left from the project I think I compared efc codes from keymaster with the lircd.conf, and could pretty easily figure out the correct hex code--
lircd.conf code for each additional key I wanted...
me == Roland Roberts [EMAIL PROTECTED] writes:
me My local cable provider apparently remaps the channels inside their
me set-top box. Since I split the signal *before* the set-top box, I only
^
By this, I mean I am feeding it into
sorry, 1 more file, this is the spreadsheet I used to figure it out..
I really wish I would learn to write more comments, but maybe it'll
make sense to you now that you are into it.
On 12/28/05, Dave Hofstra [EMAIL PROTECTED] wrote:
I did this! I dont have the xbox hooked up anymore, but
I was thinking that you would use your cable box for one of the inputs and feed the cable directly into the other.
Anyhow, you seem to be downloading the wrong channel lineup. The
solution is to download the correct channel lineup. On 12/28/05, Roland Roberts [EMAIL PROTECTED] wrote:
me ==
Roland Roberts wrote:
My local cable provider apparently remaps the channels inside their
set-top box. Since I split the signal *before* the set-top box, I only
see the unencrypted channels.
If you do this, make sure that you use the analog cable lineup from
zap2it, not the digital cable
Buechler, Mark R [EMAIL PROTECTED] says:
My recordings directory is a raid5 set which isn't the fastest in the world
[...]
Another thing I'm considering is HD. If I attempt to vew HD content from my
DVB card while streaming it to the raid5 array it can't really handle it too
well - whereas
I'm using the analog output (composite jack) on my soundcard to go
straight into my stereo receiver. My master backend/frontend
machine is an AMD Sempron 2300. Here's the output from mplayer::
[EMAIL PROTECTED] home]# mplayer -vo xv
1005_20051218123000_2005121813
.nuvMPlayer 1.0pre7-3.4.3 (C)
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello. I'm running a KnoppMyth back-end that's got version R5A26.
However, I've discovered that it's got more than a couple unfortunate
flaws that hinder (IE completely prevent) working with a front-end.
I've been searching the internets and
What mount option are you passing to the nfs share.. SMB versus nfs and
smb being faster is impossible IMO.
On Wed, 2005-12-28 at 18:31 -0800, Yeechang Lee wrote:
Buechler, Mark R [EMAIL PROTECTED] says:
My recordings directory is a raid5 set which isn't the fastest in the world
[...]
I did some further searching and found that everything in the channels
table seems alright but I am still unable to select any channel higher
than 123, if I select one from the program grid (they do all show up in
the grid) the the channel reverts to the one it was on previously or if
I
On 28-Dec-05, at 10:16 PM, Greg Oliver wrote:
What mount option are you passing to the nfs share.. SMB versus
nfs and
smb being faster is impossible IMO.
Agreed.
At least the following NFS mount options should be used if not already:
mount -o rsize=32768,wsize=32768,nfsvers=3,tcp
Try this patch (against svn 8386). The OSD popup seems only to
allow four items (at least without digging deeper into the theme
files), but since you can use ESC to cancel, it doesn't seem much of a
loss to do away with the Cancel button from the close to an existing
cutpoint popup.
(Since
Chris == Chris Ribe [EMAIL PROTECTED] writes:
Chris I was thinking that you would use your cable box for one of
Chris the inputs and feed the cable directly into the other.
I could do that, but I don't have a ir blaster (yet anyway).
Chris Anyhow, you seem to be downloading the
Kichigai Mentat wrote:
Hello. I'm running a KnoppMyth back-end that's got version R5A26.
However, I've discovered that it's got more than a couple unfortunate
flaws that hinder (IE completely prevent) working with a front-end.
http://mysettopbox.tv/phpBB2/viewtopic.php?t=7066
I'd suggest
On 12/28/05, Mike Frisch [EMAIL PROTECTED] wrote:
The tcp option may not be necessary but I haven't taken the time tobenchmark between TCP and UDP.For gigabit ethernet, the nfs people recommend TCP.From the man page for nfs (5):
WARNINGS Using NFS over UDP on high-speed links such as Gigabit can
I'm shocked that I have not heard any answers to this this question. So
I'm warming the thread.
I'm also going to ask what I believe is a simpler question. I did
verify that my keyboard is not broken by doing Ctrl+Alt+F1 to get to a
terminal screen (with a cool looking KnoppMyth LCD TV
Big long output from mythcommflag... notice it's not finding anything.
It also sits there consuming about 100% CPU during the time
immediately after it rejects the edge width and goes to 7. I admit to
using SVN, but I think the problem is far more likely on my end, as
I've been overhauling
Jumbo frames are your friend
On Wed, 2005-12-28 at 21:29 -0800, Jonathan Tidmore wrote:
On 12/28/05, Mike Frisch [EMAIL PROTECTED] wrote:
The tcp option may not be necessary but I haven't taken the
time to
benchmark between TCP and UDP.
For gigabit
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Dec 28, 2005, at 23.08, Cecil Watson wrote:
Kichigai Mentat wrote:
Hello. I'm running a KnoppMyth back-end that's got version R5A26.
However, I've discovered that it's got more than a couple unfortunate
flaws that hinder (IE completely prevent)
On 12/29/05, Greg Oliver [EMAIL PROTECTED] wrote:
Jumbo frames are your friendOn Wed, 2005-12-28 at 21:29 -0800, Jonathan Tidmore wrote: On 12/28/05, Mike Frisch [EMAIL PROTECTED] wrote: The tcp option may not be necessary but I haven't taken the
time to benchmark between TCP and UDP. For gigabit
I have the following in mythfrontend's log file, which
are the last lines before the frontend just up and
crashes (leaving the window manager still functioning
sans mythfrontend):
2005-12-28 21:03:06.177 Changing from None to
WatchingPreRecorded
2005-12-28 21:03:06.178 Realtime priority would
On 12/28/05, Roland Roberts [EMAIL PROTECTED] wrote:
Chris == Chris Ribe [EMAIL PROTECTED] writes:Chris On 12/28/05, Roland Roberts
[EMAIL PROTECTED] wrote: I'm using mythfilldatabase to populate the database from datadirect.But right now, I've got my PVR-500 plugged directly into the cable
Greg Oliver [EMAIL PROTECTED] says:
What mount option are you passing to the nfs share..
I've been using the nfsvers=3, tcp, and 32K read/write buffers options
someone else mentioned in my home network NFS setup since long before
taking up MythTV. Believe me, I'd still much rather use NFS--I'm a
On 12/28/05, Yeechang Lee [EMAIL PROTECTED] wrote:
Buechler, Mark R [EMAIL PROTECTED] says:
My recordings directory is a raid5 set which isn't the fastest in the world
[...]
Another thing I'm considering is HD. If I attempt to vew HD content from my
DVB card while streaming it to the
Steve Adeff wrote:
On Tuesday 27 December 2005 18:38, Len Reed wrote:
I've got an nvidia 6200 with DVI out connected to my Mitsubishi HDTV
(DVIS to HDMI cable). The TV does 720p and 1080i on HDMI: it's worked
from both the cable box and from a DVD player that does upscaling.
I can get the TV
Jarod Wilson [EMAIL PROTECTED] says:
Something odd going on there, I have an almost identical setup for
my master backend, and NFS works great at handling multiple HDTV
streams (both my HD capture devices are in slave backends that write
to the master via NFS), along with the occasional SD
Is it possible to run this together on 0.18.1
-pvr-500 basic NTSC analog cable
-hd-3000 OTA HDTV
I've gone through and compiled up a new kernel, can cat
/dev/dvb/adapter0/dvr0 and get HDTV from an antenna. But I can't get my
already working NTSC setup running with the HD channels. I already
On Dec 28, 2005, at 10:30 PM, Yeechang Lee wrote:
To make a long story short, my 2.8TB JFS-on-LVM2-on-software RAID 5
array has certain mysterious performance bottlenecks that result in
7.5-10MB/s local write speeds, despite eight spindles and two 3Ware
7506 controller cards in JBOD mode and on
On Wednesday 28 December 2005 22:37, Brad DerManouelian wrote:
On Dec 28, 2005, at 10:30 PM, Yeechang Lee wrote:
To make a long story short, my 2.8TB JFS-on-LVM2-on-software RAID 5
array has certain mysterious performance bottlenecks that result in
7.5-10MB/s local write speeds, despite
J == Jonathan Tidmore [EMAIL PROTECTED] writes:
J Yeah, cable into a set-top box decrypts the digital cable so your
J TV can view it. If you don't use the set-top box, then only
J analog channels are available. Every major cable company has
J different channel layouts for
I'm looking for recommendations on an add-on VFD or LCD display for my
MythTV box. Most of the relevant threads I've looked at deal with
cases with built-in displays, unfortunately. My criteria:
* Fits into a 5.25 drive bay.
* Readable 8' away in the dark.
* As many lines and columns as is
100 matches
Mail list logo
