You could try k-phone under office-communications-phone-kphone
Roly
On Thursday 03 March 2005 06:34 am, Stefan Tulak wrote:
I've installed mandrakelinux for one month and I'm very pleasured. I
think, this is very good operating system. But, I have small problem.
I've got mobilphone with GPRS
I believe the linux-nonfb means no frame buffer loaded in case you are
having video problem.
Roly
On Friday 25 February 2005 07:25 pm, Teilhard Knight wrote:
When I boot Mandrake the boot manager gives me a choice between:
linux-smp, linux, and linux-nonfb. What is the difference between
What I have found is that if I use the club setup, copy it to a root terminal,
it seems to setup OK but if I go to the gui media setup it is not there. Run
rebuild etc to no avail.
Roly
On Sunday 28 November 2004 09:57 am, Rob Blomquist wrote:
On Sunday 28 November 2004 9:38 am, Jack wrote:
2004 01:40 am, John Richard Smith wrote:
Roland Hughes wrote:
I have brought down the 10.1 Official iso's (4) and am having trouble
burning them.
I have tried cdrecord on the command line and ran md5sums on the cd after
and and it comes up with a different result than what came down
I have brought down the 10.1 Official iso's (4) and am having trouble burning
them.
I have tried kb3 with checking after burn and it always comes up with a error.
I have tried cdrecord on the command line and ran md5sums on the cd after and
and it comes up with a different result than what came
I have had this problem in the past with external modems. Some on suggested
that I not lock the speed(I think) but I never tried it.
Roly
On Friday 08 October 2004 05:15 am, Robert Lucencic wrote:
Hi, all!
I've installed Mandrake 10.1 Community Edition recently.
I'm having problems with my
I have had problems with the second and third cd's also. I had chalked it up
to the new(cheap) DVD burner I had put in. It would be interesting if there
is a problem.
Roly
On Wednesday 06 October 2004 03:31 am, Alexander Ruoff wrote:
I have a problem with the Iso-Images I have for 10.1. I
I am using a linksys wireless bridge that works well. It's the Wet54g and
links to a linksys base.
Roly
On Friday 16 July 2004 06:00 am, Fajar Priyanto wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thursday 15 July 2004 02:34 am, Kevin Ferguson wrote:
Sounds like you need a
It must from using a MS Intellimouse. In one sense it's a oxymoron. In the
other Linux recognizes what it is and refuses to work with it.
Roly
On Thursday 08 July 2004 07:51 pm, Stephen Kuhn wrote:
In my MDK 10.0 OE setup, my MS Intellimouse is acting rather strangely;
sometimes the wheel
and enjoy!
AMSN looks the same that MSN but with Penguins !, so funny!
Also you have more options than in the original MSN like be advised when
somebody blocks you
Ary Kaplan Nakamura
El Vie 02 Jul 2004 02:35, Stephen Kuhn escribió:
On Fri, 2004-07-02 at 14:45, Roland Hughes wrote:
A friend
A friend wants to try using linux on his pc but the main hang up is a MSN
account he has had for a long time and wants to keep accessing.
I have never heard of anything in linux that will allow you to authenticate
and use MSN but I thought I would throw it out here and see what came back.
I
The latest linux journal has a large write up on various sound manipulation
packages.
Roly
On Monday 17 May 2004 02:28 pm, eric jackson wrote:
Hi,
I'm trying to record some of my old record albums to my hard drive. I've
tried using Gramofile but I didn't get great results and it isn't being
I can only tell you my experience. I only wiped out the other partitions but
left home alone. When I started KMail for the first time it asked me if I
wanted to move my old directories to the new. I said yes and never saw any of
them again. My be a bug who knows.
Roly
On Tuesday 11 May 2004
What I do is set up a security source, the only one I have been able to get
working is a french site called proxad I believe. Then I check all the
types security, bugs and updates and get about 3 screenfuls select all and
go.
Roly
On Thursday 29 April 2004 10:34 am, Ron Hunter-Duvar wrote:
I did a upgrade on my wife's PC and except for fixing a few icons it seemed to
go in good. She user's kppp and it works fine.
roly
On Wednesday 28 April 2004 06:07 pm, Marc wrote:
On Wednesday 28 April 2004 09:26 am, Katinka Peter wrote:
Since I`ve updated from 8.2 to 10.0 Official, I cannot
This maybe a dumb question but have you checked the mixer and sound levels it
is set to?
Roly
On Thursday 15 April 2004 09:46 pm, Rory wrote:
Hi folks,
No luck on other venues I've tried, so I'll give newbie@ a shot. I'd love
if someone could give me some clues on this one. I've posted
grip should do it.
On Tuesday 06 April 2004 05:46 pm, Marc Resnick wrote:
Does anyone know of a decent track ripper/encoder for ripping tracks off
CDs? I've used Kaudiocreator, but I was listening today, and I just
happened to notice that the sound quality is about equal to that of
crap.
Boot on the second cd and answer the questions that come up and at some point
put the cd1 back in and it should install fine. Some cd drives cause this
problem.
Roly
On Thursday 25 March 2004 02:31 am, bmobile40 wrote:
I've been trying to install mandrake10 for about a week now.
I keep
Try USBView to see if the usb connection is recognized.
Roly
On Tuesday 02 March 2004 07:24 pm, g wrote:
Hi folks,
I'm a newbie and admit that I have little idea what I am doing.
I am trying to get my Sony USB based palm pilot (model PEG-SJ22) to synch
with built in programs under mandrake
will let
you know the result.
Thanks for replying to my sob story.
Roly
On Sunday 15 February 2004 08:04 pm, Rob Blomquist wrote:
On Monday 09 February 2004 6:30 pm, Roland Hughes monotonically droned on:
I am running Mandrake Community(Download) 9.2. I have kept it up to date
using urpmi
Just an update- I have brought down the dependencies but when I go to install
them I get the message everything installed. I have rebuilt the database
and am not sure where to go from here.
Roly
On Tuesday 17 February 2004 05:26 pm, Roland Hughes wrote:
Sorry I am so late getting back to you
I am running Mandrake Community(Download) 9.2. I have kept it up to date using
urpmi but now have hit a dependency brick wall. The following is what I get
when trying to do a update:
Some package requested cannot be installed:
ImageMagick-5.5.7.15-1.2plf.i586 (due to unsatisfied
I tried the upgrade and it hosed kde and the menu system. I then re-did it
as a install so I did not play around to much.
Roly
On Thursday 04 December 2003 12:31 am, Hutton Daniel wrote:
There is a log of my upgrade to 9.2 at
http://web.tiscali.it/danslinuxbox/Linux.html
Let me know if there
In terminal type su and then put in the password, On anything else I saw
some references to kdesu program name to run it as root.
Roly
On Saturday 22 November 2003 08:15 am, Cenora wrote:
Hello,
I have just installed MDK9.2. How do I run a terminal under superuser
mode, or the file manager
I would stick with hp if you can.
On Saturday 22 November 2003 04:26 pm, Charlie wrote:
Getting a laser printer finally. I know someone who has several used ones
that her company is getting rid of. All various brands and models. Are
there any particular ones I should stay away from?
Mandrake
I would suggest Dia.
On Tuesday 25 November 2003 12:10 pm, [EMAIL PROTECTED]
wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Mark Kirschner
Sent: Tuesday, November 25, 2003 1:57 PM
To: MandrakeNewbie (E-mail)
Subject: [newbie] Visio-like
] ([68.224.124.100]) by fed1mtao08.cox.net
(InterMail vM.5.01.06.05 201-253-122-130-105-20030824) with ESMTP
id [EMAIL PROTECTED]
for [EMAIL PROTECTED]; Fri, 14 Nov 2003 20:37:13 -0500
From: Roland Hughes [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [newbie] ** LIST ISSUES
I have been getting bounce backs for days and had no idea what was going on.
It makes any interaction to the list very laborious. Can you fix me up?
Roly
On Friday 14 November 2003 08:47 am, Eric Huff wrote:
Hello all,
Sympa has all of a sudden decided that i do indeed need to see all
email
My experience is - no upgrades, tried one and it was crappy, and I installed
it on 5 PC's with only minor problems but when I went to upgrade a friends
computer that had been running 9.1 fine it seemed fine and I left it doing
updates and when it finished it totally crapped out kde and Gnome.
That's only because they want 98 to be able to get worm's etc, like 2k and xp.
Roly
On Wednesday 12 November 2003 03:01 pm, Kevin B. O'Brien wrote:
At 01:56 PM 11/12/2003, Anne Wilson said something remarkably like (but
somehow subtly different from):
And don't forget to tell them that all
Just to put my input to the group. Before 9.2 I have always done an install
and just left the /home partition alone. This time I decided to try the
upgrade and if it bombed I would just do a new install. Well everything went
perfectly. Took about 20 minutes and so far everything works even the
The only way I could get bittorrent to work was find Java client (asus) and
run it at work on a xp box. It took a long time to start but finished up and
I have let it keep running for day's. Last I looked I had 70+ people
connected and up loading. I throttle it down during the day and open it
I used KB3 and just right clicked the iso image file and said burn and away it
went. Did not tell it to burn to a folder just burn the the iso directly(the
second kb3 selection from the right click.
Roly
On Wednesday 01 October 2003 03:47 pm, Heather/Femme wrote:
Hi
Trying to make an ISO
I am not sure what you mean by autoload file but you should be able to start
KPPP in a terminal window.
Roly
On Wednesday 13 August 2003 05:57 am, aj wrote:
hi all
I'm new Mandrake 9.1 user and linux too. I've two questions 1- I've
notebook Compaq prosignia 150, it has a winmodem Lucent I
I use a linksys 802.11b card in my Zaurus and it works fine with the 3.1 rom.
Roly
On Monday 11 August 2003 03:15 pm, Dennis Myers wrote:
On Monday 11 August 2003 10:43 am, Ben wrote:
On Sunday 10 August 2003 22:35, Nick Emans wrote:
Stephen Kuhn [EMAIL PROTECTED] wrote:
On Sun,
I do not claim to be a expert on linux but I have tried to use external
modems on Mandrake 9.1 on two box's and have not been able to get them
working.
They dial out, go through the hand shaking, get a connect , start ppp and the
just re-dial. I unchecked the lock and tried every speed setting
Hell Joe as a fellow canadian I nominate you to answer all the italian posting
after doing such a good job!
Roly
On Wednesday 16 July 2003 07:13 am, JoeHill wrote:
On Wed, 16 Jul 2003 14:59:27 +0200 (CEST)
stefano macchiavelli [EMAIL PROTECTED] uttered:
Ciao a tutti,
mi chiamo Stefano
On Wednesday 16 July 2003 07:16 pm, JoeHill wrote:
On Wed, 16 Jul 2003 17:38:52 -0700
Roland Hughes [EMAIL PROTECTED] uttered:
Hell Joe as a fellow canadian I nominate you to answer all the italian
posting after doing such a good job!
Thank you, but you don't know I didn't just run it through
Has anyone managed to get TaxCut to work under wine? This would allow me to
get rid of my last windows partition.
Roly
On Tuesday 15 July 2003 06:28 pm, Paul Kaplan wrote:
I got wine to run Excel 97 Word 97 (at least for what I was doing using
the RPMs that came with Mandrake 9.0, but
It worked fine under windows but I want to get rid of that.
Roly
On Tuesday 15 July 2003 08:44 pm, aron smith wrote:
On Tue, 2003-07-15 at 19:30, Roland Hughes wrote:
Has anyone managed to get TaxCut to work under wine? This would allow
me to get rid of my last windows partition.
Roly
I have finally had the chance to get off of dial up and on to a shared
dsl. My problem is I cannot get the Internet connection to switch from
modem to eth0. The nic is up and connected but when I bring up the
mandrake control center and go to networking it only shows the modem as
the connection
I have done 3-4 install's and everyone was different. I think mandrake
is becoming like windows ( I am joking!).
Roly
On Tue, 2003-06-24 at 20:03, Dennis Myers wrote:
On Monday 23 June 2003 10:30 pm, Allan wrote:
Hi,
Does anyone know why Mandrake 9.1 seems to come up with different
Have installed Mandrake 9.1 on a new box I built, P4 2.4 GHZ, 512 ram,
120 GB HD, and am having a few problems.
1) I use evolution and brought the folder over, but after I tried to
install the NVidia drivers it will not start and when I tried it from a
command line it complained about not
My only comment is if I am burning (x12), running seti and browsing the
web on a 2.4GHZ P4, 512 meg Ram,running XP Professional the bloody thing
becomes unusable. If I do the same on my 800MHZ, 512 meg ram duron
running MD9.0 I barely notice anything.
Roly
On Sat, 2003-02-15 at 12:05, Andrew
The PLF (Penguin Liberation Front (I think)) has a DeCss rpm but I have
not been able to get it working yet.
Roly
On Fri, 2003-01-17 at 14:09, Anne Wilson wrote:
I would have thought that after the ruling last week that it is perfectly
reasonable and legal to watch videos that you have bought
-01-09 at 10:20, Roland Hughes wrote:
Well I tried your suggestions again with no joy( attached my efforts). I
also tried some other combinations(again attached). I also tried some of
the suggestions Anne and others made but no joy either.
I really appreciate everyones help.
Roly
I
Thank you very much I am bring it down now, can hardly wait.
Thanks again.
Roly
On Thu, 2003-01-09 at 21:00, Pilagá wrote:
El Jue 09 Ene 2003 19:40, Roland Hughes escribió:
happier, all I have left now is to figure out how to setup the decss for
xine and the I will be in heaven.
Thanks
I did a fresh install of Mandrake 9.0 and have not been able to get the
removable media to work. I bought a new cdrom drive and have re-seated
the cables numerous times. I disabled the supermount using the command
supermount -i disable in a root terminal mode. I have attached my
dmesg output and
I hooked up a older scanjet and used Kooka to run it as a user. It
didn't find it the first time I ran it but worked on the second try.
Roly
On Wed, 2002-12-18 at 20:13, Smiley wrote:
On Wed, 18 Dec 2002 21:54:00 -0300
Pilagá [EMAIL PROTECTED] wrote:
Smiley: Try this: xsane
:
On Wednesday 11 Dec 2002 2:08 pm, Roland Hughes wrote:
Yes, I gave it a root password and can log in as root with red screen
and all. What I can not do is install packages and change config files
without getting a message to the effect that I do not have the rights to
do it.
OK - totally dumb
:
On Tuesday 10 December 2002 09:03 pm, Roland Hughes wrote:
I have recently upgraded/installed Mandrake 9.0 on a 700Mhz Duron, 512
of memory and a 40 Gig drive. It was a fresh install with formating etc.
Below are my Fstab and pci output.
The problem I am having is that the system thinks
I have recently upgraded/installed Mandrake 9.0 on a 700Mhz Duron, 512
of memory and a 40 Gig drive. It was a fresh install with formating etc.
Attached are my Fstab and pci output.
The problem I am having is that the system thinks root has no rights to
things such as drives and various
Some times a non-gimp generation of graphics files do not generate a thumb-nail ajunct
file which is what most thumb nails are. When I find one I push the generate thumb
nail button and then it has one from then on.
Roly
On Tue, 5 Nov 2002 18:08:03 +
Anne Wilson [EMAIL PROTECTED] wrote:
We where replacing them while still in warranty.
Roly
On Thu, 17 Oct 2002 07:00:02 -0400
ET [EMAIL PROTECTED] wrote:
On Wednesday 16 October 2002 09:42 pm, Roland Hughes wrote:
The Quantum fireball disk drives have a very high failure rate. At
work we have replaced every one of them. Roly
Done.
roly
On Thu, 17 Oct 2002 22:02:39 +
Miark [EMAIL PROTECTED] wrote:
This is great, Todd, thanks. My wife sent a letter to our
representative asking him to support the act. If anybody out there
want to write their representative but doesn't know how, do this:
1) Connect to
The Quantum fireball disk drives have a very high failure rate. At work we have
replaced every one of them.
Roly
On Wed, 16 Oct 2002 19:55:45 -0700
Dimitris Adamopoulos [EMAIL PROTECTED] wrote:
Need some help here!
Yesterday I installed mandrake 8.2 on my oldie. P133 with 72mb RAM and
a
I find that as Gnome improves it is less able to run under KDE. I was using evolution
and galeon and did a redcarpet upgrade and they were both kaput. After 43 years in
this business I am again learning that small individual apps doing a specific job are
better than one app trying to do
I use Sylpheed and have to have mozilla started before it will work.
Roly
On Thu, 28 Sep 2000 01:54:25 -0400
Andrew [EMAIL PROTECTED] wrote:
Hi All,
I have found the greatest e-mail program sylpheed. It is a
keeper, I've used it for a few hours and love it. One problem;
My mistake, but it still made my system more stable.
Roly
On Tue, 24 Sep 2002 09:01:16 -0500
Tom Brinkman [EMAIL PROTECTED] wrote:
On Sunday September 22 2002 01:48 am, Roland Hughes wrote:
The reason for the mem=nopentium in the lilo is that when the
kernal was developed there are memory
The reason for the mem=nopentium in the lilo is that when the kernal was developed
there are memory commands/coding that refer to pentium only commands. If you are
running a Athlon/duron which do not have these commands they cause flaky/erratic
behaviour.
Roly
On Sun, 22 Sep 2002 09:37:15
For what it is worth I installed rc2 on a dell GXa at work and it was the first
Mandrake release that detected the video and installed it correctly on the install.
Looks like it is going to be a great release.
Roly
--
The directions said to install Windows 98/2000 or better!
So I
I have a real problem remembering the command line utilities Mandrake has for
configuring X etc. Does anyone know of a list or guide that I could print out to help
remind me of the command and switches. I have looked on the Mandrake site but could
not find anything.
Roly
--
The directions
I use XMMS to play mp3's when I am surfing and would like it to repeat through a
directory until I stop it. I have tried repeat and other settings but it just goes
through once and the quits. Is there a way to make it keep going?
Useing Mdk 8.2 and XMMS 1.2.7
Roly
--
The directions said to
I only use M$ at work and it is because the goverment enity I work for is totally
committed to M$ and I have no choice. The T1 connection is nice though:^).
Roly
On Wed, 28 Aug 2002 20:24:52 -0600
Miark [EMAIL PROTECTED] wrote:
Roland Hughes [EMAIL PROTECTED] saith:
I had a wierd thing
I had a wierd thing occur at work down loading the 9 beta 4 iso's. when they where
saved to disk they all had a .exe added to them. This is Mozilla 1.0 I believe
running on a 2k box.
Anyone else have this problem?
Roly
Want to buy your Pack or Services from MandrakeSoft?
Go to
I upgraded Evolution using redcarpet and it's kaput. When you try to start it it say's
it cannot find the config file a quits. Anyone else had this problem or know where the
config file would be and it's name?
TIA
Roly
Want to buy your Pack or Services from MandrakeSoft?
Go to
I am going on vacation and need to turn it off for a while, or my isp
will kill me, and I can not find out how.
Roly
--
The directions said to install Windows 98/2000 or better!
So I installed Linux!
Linux Counter: 241069
Want to buy your Pack or Services from
Thanks! That's what I love love about this group.
Roly
On Tue, 2002-07-02 at 20:28, Michael Adams wrote:
On Wed, 03 Jul 2002 13:55, Roland Hughes wrote:
I am going on vacation and need to turn it off for a while, or my isp
will kill me, and I can not find out how.
Roly
No problem. Read
Do you have a nic also? I had the same problem and had to do a ifconfig
eth0 down to get the modem to talk to the apps.
Roly
On Sat, 2002-06-22 at 18:20, F. McKenna wrote:
Hi all,
Like it says in the subject line I can't browse the 'net. Mandrake 8.2
dials out with my 33.6 modem and
Try webmin, the newer one has a mysql and pogresql management built in.
Roly
On Fri, 2002-06-21 at 14:34, Joshua James wrote:
How do I get MySQL to act as a Microsoft SQL Server client so I can edit
records?
That would be perfect now that I have unixodbc working (kinda).
On Fri,
I have instlled Mandrake 8.2 on a Gateway Solo 5150 with a xircom pcmcia
card containing a ethernet nic and a modem. I was pleasantly surprised
with the install and the xircom/modem/nic was detected and set up.I know
the nic works (eth0) and have set up kppp to dial out and connect to my
isp.
I went through the same thing and what cured it for me was updating the
cups server and various other cups related software using mandrake
update.
Roly
On Tue, 2002-06-04 at 04:51, Azrael wrote:
I guess I must seem to be Mr Problem A Day - just installed mandrake
chap... but here goes.
I
Is anyone having printing problems with OO1.0. I can print out of every
other app but nothing comes out of OO. I have set the printers up and it
will see the printers I have set up under the cups print system but
nothing is queued up even though it acts like it is printing properly.
Roly
--
Galeon only looks in the mozilla plugin directory. I found this out the
hard way, banging my head against it for awhile.
Roly
On Tue, 2002-05-21 at 16:53, Michael Kovary wrote:
I have download jre-1_4_0-linux-i386.bin and installed it in
/usr/local/java.
I then copied the contents of
I had the same problem with the same printer. What fixed it for me was
doing a Mandrake update and selecting everything that mentioned cups.
I believe there was a server update and filters and a couple of other
related updates. I have a slow dialup so I kicked it off over night and
the next
My printer , a Canon S450, suddenly is printing everything twice as
large as it should be. This includes fonts and graphics. I am using the
cups system and have tried replacing the driver, from
Linuxprinting.org's cups-o-matic system.
Anyone come across this before? I am using M8.2, 512 meg of
I am having similar problems after doing the same from LM8.1. The video
is very flaky and icons do not show up in apps properly and when I click
the drop down for the different folders evolution just disappears.
Roly
On Wed, 2002-04-03 at 09:22, Blood Slap wrote:
I've been using Mandrake 8.1
I have been watching the messages but have not noticed a post about
someone using the upgrade option with Mandrake 8.2.
I am running LM8.1, evolution galeon, and KDE on a Duron 800MHZ with
256MB ram and a 56k modem.
Has anyone tried it and what were the results.
Roly
Want to buy your
78 matches
Mail list logo
