Carissima comunità ho bisogno del vostro aiuto ho un problema quando
configuro un server con Linux Mandrake 7.0 quando fa il BOOT alla
partenza dei DEMONI precisamente NETWORK mi restituisce una frase :
/etc/rc.d/rc5.d/S10network : [ :=:unary operator expected, nello stesso
modo anche su
Is there a way to get linux to detect my USR internal 56k modem when the
cards jumpers are set to PnP?
Right now I have to set the jumpers to PnP to work with windows and set
the jumpers to com2 to get it to work with Linux.
OK I use Mandrake 7 the mail can send it, but the mail incoming can drop
in the mailbox the maillog says...
Feb 15 01:23:03 tlahui postfix/qmgr[18596]: 7E26A1085E:
from=zarapejo@netscape.
net, size=949 (queue active)
Feb 15 01:23:03 tlahui postfix/local[18867]: fatal: open database
No joke, I posted some very easy instructions a while back
I don't know if you saw them but unless these guys are new,
then I don't know what the deal is, maybe I should post
them like once a week automatically or something.
On Mon, 14 Feb 2000, bluebottle mewed:
I've just been deleting all
Unsubscribe
I'm using kmail and the filter works very well.
John the Nadger
http://mklinux.cjb.net
On Mon, 14 Feb 2000, you wrote:
What email program does everyone use? I am using csc mail for now until i can find
something better, netscape doesn't do it for me and i need filtering...
any ideas?
I have a Micron system: 533 MHz Pentium III (Katmai), Via Apollo chipset, and 128 MB
of 133MHz SDRAM. I just installed Mandrake 7.0 on my system, and it only sees 64 MB
of RAM (instead of 128). Can anyone out there help me figure out what the problem is?
Alan
Donald Carpenter [EMAIL PROTECTED] wrote:
I finnally got my modem to work and it connects to my ISP ok.
But, After I connect, I can't get my mail nor can I connect to any
sites.
Any Ideas?
=
Sounds as if you neglected to edit /etc/resolv.conf
add the lines:
Using LILO?
When you boot linux, start it with
LILO: linux mem=128M
It should come up with the full 128 meg. Try it by using 'free' from a shell.
To make it automatic, edit /etc/lilo.conf and add the line
append="mem=128M" to each stanza you use to boot linux.
Enjoy the extra memory
did the append line work for you after you joined the two together with a comma?
I can't check right now, but have a read of
man lilo.conf
There's bound to be an example somewhere
Steve Flynn
IBM MVS Operations Analyst
"Brent Timmer" [EMAIL PROTECTED] on 14/02/2000 22:22:49
Please
That's the manaul page for lilo.conf in compressed format.
Try reading it with
man lilo.conf
the file you need to edit is /etc/lilo.conf
Steve Flynn
IBM MVS Operations Analyst
"Westbrook" [EMAIL PROTECTED] on 15/02/2000 01:14:04
Please respond to [EMAIL PROTECTED]
To: [EMAIL
It depend on the shell you are using. I'll assume you're using bash.
Log in as your usual userid (please don't say this is root!)
cd ~
vi .bashrc
See that line that says PATH=
Add stuff onto the end of it - seperate paths with colons
Save the file and logout
Log back in again
set
You
You can follow the thread titled "[expert] PPPD dying" and it should document the
problems encountered.
I haven't tried Russ' idea since I burned up too much time wrestling with this
problem. But it seems to be the solution. Good luck
and let us know how you did.
I have found that fiddling
Any ideas why?
Thanks.
Disregard... just read http://www.linux-mandrake.com/en/fupdates.php3.
--
http://www.uplink.freeuk.com - ICQ: 15212336
No witty comment or quote required.
They are switches.
They alter the output you get back from various commands.
For axample
ls -a =directory listing of ALL files (includes all files beginning with
'.')
ls -l =Give me the list in 'long' format
ls -al=Give me that list again, in long format and shaw ALL
Haven't I already told you how to fix this?
Anyway, edit /etc/lilo.conf and add a line like the following to each stanza you
use to boot linux:
append="mem=256M"
/sbin/lilo
Restart.
You can achieve the same manually by starting lilo with
'linux mem=256M' rather than just 'linux'
Steve
Hi all,
Just moved from RH6.1 to Mandrake 7.0 on the weekend, hey this is much
niceronly two
problems that won't go away though. Any help appreciated.
1. The 'recommended' Mandrake install doesn't seem to be able to drive
my floppy properly. It used to work
before Mandrake. On default
On Mon, 14 Feb 2000 21:12:52 -0800 (PST), Joe Knapp -Technician wrote:
-What is the problem you guys are experiencing? I missed the origional
-message, anyway, i have a SB Live and it detected at install and works
-great. (mandrake 7.02).
-
-Joe Knapp
great for you :-) I've installed MD 6.1 and
-- if I recompile my kernel TCP/IP stops working and I have to resort to
-reinstalling mandrake 6.
-
I have a question in general concerning IRQ's and the way they are handled inside
Linux
I'm swapping HDisks for testing different Configurations. IRQ's are fixed inside Bios
setup So
Quoting Donald Carpenter [EMAIL PROTECTED]:
I finnally got my modem to work and it connects to my ISP
ok.
But, After I connect, I can't get my mail nor can I
connect to any
sites.
Any Ideas?
DNS addresses correct? Mail client set up correctly? Routing
set up correctly?
Ron
I finally got my usr internal pnp isa modem working!! I can now connect to
the internet. My problem now is that no matter what I do, I can't get
anything. Netscape, e-mail programs, pinging. None of them work. I can't
access anything. Anyone have any ideas?
Hi,
During boot the following appears in my screen:
Loading sound module can't locate module sound [FAILED].
When I try in the terminal: modprobe sound
I get a message: can't locate module sound
How can I fix this problem??
Thanks in advance,
Jacob
alias BillyNoel
actually, I had to put
append="hdd=ide-scsi mem=256M"
Thanks thogh, got me closer
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, February 15, 2000 5:17 AM
Subject: Re: [newbie] Missing Ram -- Append?
did the append line work for you after you
Thanks a lot
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, February 15, 2000 5:27 AM
Subject: Re: [newbie] paths in linux
It depend on the shell you are using. I'll assume you're using bash.
Log in as your usual userid (please don't say this is
Hi all
I'm not sure if anybody could help me, but I have to try. Just few days ago
I installed Mandrake 7.0-2. I've got a little problem with fonts. I think
it's font server.
I'm from Poland, so I'd like to have polish fonts. I installed them and now
I've got polish fonts in text mode and in
I have a hp 600c, and have found the right ghostscript driver to use with
it, along with making a pdq file. How do I get it to use this driver and
pdq file to print files now? I mean like a text file, graphic etc in say a
kde or blackbox session(xwindows)?
I have a hp 600c, and have found the right ghostscript driver to use with
it, along with making a pdq file. How do I get it to use this driver and
pdq file to print files now? I mean like a text file, graphic etc in say a
kde or blackbox session(xwindows)?
unsubscribe
To be honest, haven't enabled http (no http server) or ftp.
But, we're running over a TCP/IP network and ping, printing to a
TCP/IP printer and http and e-mail client services work.
I would say my TCP/IP is fine. The Mandrake box also works fine as a
telnet client, but not as a host.
-David
At 01:38 AM 2/15/00 -0500, you wrote:
Is there a way to get linux to detect my USR internal 56k modem when the
cards jumpers are set to PnP?
Right now I have to set the jumpers to PnP to work with windows and set
the jumpers to com2 to get it to work with Linux.
Hi,
Could you let me know if you
You'll find some of them in /etc/profile.d/alias.sh
Ed Negari wrote :
I grep'ed the whole /etc and /etc/skel directory, but couldn't
find anything. I noticed a bunch in ~user/.bashrc, but those aren't the
ones I'm looking for. It's these:
ed@club-ed:~$ alias
alias cd..='cd ..'
alias
Unsubscribe
Unsubscribe
Unsubscribe
yes i am setting up as server thanks I'll give it a try
-Original Message-
From: Jim Witterschein [mailto:[EMAIL PROTECTED]]
Sent: Monday, February 14, 2000 4:12 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] i have given up on mandrake 7.0
I had that esperience once, during the
"Brent Timmer" [EMAIL PROTECTED] wrote:
I finally got my usr internal pnp isa modem working!! I can now connect to
the internet. My problem now is that no matter what I do, I can't get
anything. Netscape, e-mail programs, pinging. None of them work. I can't
access anything. Anyone have
To unsubscribe send a mail to [EMAIL PROTECTED]
and put in the subject :
unsubscribe newbie.
or go to the web page and unsubscribe via the web interface.
This is from an email I got when I first signed up with this
newsgroup. You people are like spammers. Filling up our email
with your damn
WHO could help me with mySQL installation?
marc
*
* MERCATOR GmbH *
* Your Presence Provider *
*http://mercator.net *
* e-mail: [EMAIL PROTECTED] *
*
I've installed Mandrake 7..0 and now I am attemtpting to setup Samba. However,
when I run ./configure, I get the following messages:
checing for gcc...no
checking for cc...no
no acceptable cc found in $PATH
I have modifed my path a number of times, adding path's to where I believe the
GCC
Not desperate.. just spoiled... :)
Tried Post Office... has lots of promise, but lacks polish...
know of any others?
Aaron
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, February 15, 2000 9:10 AM
Subject: Re: [newbie] Can anyone recommend a good
I have
heard on here that you need to manually enter in your IP address, and DHCP
information, and all of the other information. I don't think Linux detects IPs
very well. When I had it try to detect my networking, it gave me some eroneous
number that wasn't even anywhere near correct. At
Have you tried rebooting? If the files were in a /tmp directory, they
should have been temporary.. therefore, if you reboot perhaps the necessary
files will be recreated.
Aaron
- Original Message -
From: Brent Timmer [EMAIL PROTECTED]
To: Linux [EMAIL PROTECTED]
Sent: Tuesday,
David Regan wrote:
I was not able to run MandrakeUpdate under v6.0 and now I have the same problem with
v7.0. When I run the program it chugs away for a while and then comes back with
"fetching of mirror list failed. Has anyone else had this problem or know of a
solution.
snip
I think the
At some point your hdc2 device has been corrupted.
Try running fsck /dev/hdc2 when you get this prompt.
Hopefully, you won't lose any data but be prepared Have you switched your
box off with shutting it down first?
Steve Flynn
IBM MVS Operations Analyst
lights [EMAIL PROTECTED] on
On Mon, 14 Feb 2000 22:44:04 -0500, Russell Simmons wrote:
-i'm reposting this question, as no one has answered it...can anyone tel me
-if this is possible?...
-
-Russell Simmons wrote:
-
- i have a dual boot box (windoze 98/lm 6.0) on a 5.1 gig wd hd...when i
- partitioned the drive i gave 4
unsubscribe
Nicholas Clark
Rhysjones Consultants
IT Department
Halley House
49 Burney Street
Greenwich
London
UK
SE10 8EX
Tel:- +44 (0)181 305 2277
Fax:- +44 (0)181 853 3281
#
Title: RE: [newbie] Connected to the internet, but can't access anything
hi
modify your resolv.conf like as
$ pico /etc/resolv.conf
# -- this is comment line letter
#xxx.yyy.zzz.qqq is your isp's nameserver ip address.
#If you don't know this address;
#you can try ping www.your_isp.net
when i try to install Mandrake 7.0 on my system, i've got the message hdb
: lost interrupt.
(i have a goldstar cdrom)
I 've ever fix this pb with my mandrake 6.1 by upgrading the kernel.
Any other solution for the Mandrake 7.0 ?
I decided to give Mandrake a try and I just installed Mandrake 7 for the
first time (although I've used other linuxes for about 5 years). Anyway, I
noticed that Mandrake pre-sets a bunch of aliases for the user. Where are
these set? I grep'ed the whole /etc and /etc/skel directory, but couldn't
I just installed Mandrake 7.0 and I can't get the
nic to my cable modem to work. The nic to the network is working ok eth0, but
eth1 will not activate under DHCP in control-panel. My Cable modem ISP is
mediaone which uses DHCP. Both my nics are ESL-835-TB PCI (Nek 2000pci). I
tried to
Not only are you posting to the wrong address, but posting an unsubscribe
message twice isn't going to make it work!
Read the email I just sent you!
Steve Flynn
IBM MVS Operations Analyst
"John Catral" [EMAIL PROTECTED] on 16/02/2000 01:12:09
Please respond to [EMAIL PROTECTED]
To:
If i doesn't, I've used Partition Magic for windoze with _great_ success.
-David
i'm reposting this question, as no one has answered it...can anyone tel me
if this is possible?...
Russell Simmons wrote:
i have a dual boot box (windoze 98/lm 6.0) on a 5.1 gig wd hd...when i
partitioned
I know this is a lame question, but how? Search for telnetd? It won't
be listed as a process. That's interesting that it's not default.
However, in the inetd.conf file, the ftp and telnet lines are
uncommented.
-David
check whether your telnet-server package has been installed. It doesn't
Hello,
I'm used to using MS Outlook Express and also Agent for email in Windows.
Looking for a comparable program in Linux.
Any Ideas?
Thanks,
Aaron
are you able to telnet out from your linux box? If yes, try to telnet back
to itself.
If it doesn't work, check that you have the telnet-server service there.
If there isn't any, the telnet-server rpm can be found in the installation
disk.
hope it works for you.
Hi
I'm having trouble with email, I can send email, send and receive news,
but I can't receive email, I use mozilla, and I get the answer "no route
to host", and I tried with email and the problem continues, can anyone
help me ?
Thx all
Paulo Moreira
Ron,
I also have MediaOne. Here is my setup.
Adaptor 1 - eth0 is connected to the cable modem
Adaptor 2 - eth1 is connected to a hub that other PC's in my house are connected
to
Try this...
From the command prompt as root:
linuxconf
Choose:
1. Networking
2. Basic host Information
I've never done this myself so there'll be switches you need to add onto
pnpdump, I expect.. something like the following:
man pnpdump
pnpdump ~/pnpoutput
vi ~/pnpdump(or whatever editor you like)
isapnp ~/pnpdump
I guess! YMMV
Steve Flynn
IBM MVS Operations Analyst
Ger-Bil
Might be a daft question but what's wrong with ELM and PINE?
You desperate to have a GUI interface?
Steve Flynn
IBM MVS Operations Analyst
"Aaron Zuercher" [EMAIL PROTECTED] on 15/02/2000 14:21:47
Please respond to [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:(bcc: Steve
sure it will, if you do ps -e
that's how you have a gander at all those wacky daemons.
-fish
From: David Russell [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
Date: Tue, 15 Feb 2000 09:18:54 -0500
To: [EMAIL PROTECTED]
Subject: Re: [newbie] telnet
I know this is a lame question, but
Thanks Seve. I'm actually using version 6.0 of Mandrake though.
At 12:42 AM 2/15/00 -0800, you wrote:
Steve,
You're going to run into a slew of problems trying to get your modem to
work in Mdk7.0.
As far as "sorry, modem is busy", I had to initiate the following sequence
to fix it:
(assuming
Help!! I deleted the files in /tmp(thinking they were only temporary files).
Now I can't get into blackbox, cant run simple commands like (xv, setroot,
imwheel, root, and many other).
Can someone tell me what I did and how I can fix it, please?!
I used Partition Magic to resize the Windows partitions,and created a
primary Linux native partition for Mandrake before installing.
I'm running Win98/Win2000/Mandrake.
Also I didn't install LILO,but just use a boot disk to boot to Mandrake.
Hope this helps. Good Luck
- Original Message
For all you with pnp modem problems, this is how I got my usr 56k internal
ISA modem to work pnp:
1.Type "/sbin/pnpdump /etc/isapnp.conf" ##this loads info on your
ISA PnP board(s) into the appropriate .conf file.
2.Type "/sbin/isapnp /etc/isapnp.conf" ##this makes your existing
ISA
Aaron Zuercher wrote:
Hello,
I'm used to using MS Outlook Express and also Agent for email in Windows.
Looking for a comparable program in Linux.
Any Ideas?
Thanks,
Aaron
Netscape. Or Kmail. Or Spruce. Or Balsa. Or Pine. :-) Or Elm :-)
Actually, Magellen is what I am waiting
Yes, I can telnet out. I went to the CD and the package is
client/server. When I attempted to install, there was already a newer
version on my cpu.
Ideas?
-David
are you able to telnet out from your linux box? If yes, try to telnet back
to itself.
If it doesn't work, check that you have the
Ok, so I mentioned earlier I had problems with my SB
Live! I have Mandrake 6.1 and tried to recompile the
kernel to version 2.2.5 (Creative told me their beta
drivers worked for only this version).
Anyway, the compilation seemed like a success. Then I
rebooted, and I got in, but nothing
Right - I must have sent the following message to about 20 peope *today*
all trying to unsubscribe.
To unsubscribe send a mail to [EMAIL PROTECTED] and put in the
subject :
unsubscribe newbie.
or go to the web page and unsubscribe via the web interface.
If you are still on the list and
I'm unable to use
either of my CD drives ( one is a CD burner) in Mandrake 7.0
they are both Atapi/IDE drives.
I' ve read posts and articles about recompiling
the kernel to change the IDE to scsi . that doesn't seem to work because I
really don't have any idea what I'm doing.
Anyway my
See my reply to you on the list - in the mean time
To unsubscribe send a mail to [EMAIL PROTECTED] and put in the
subject :
unsubscribe newbie.
or go to the web page and unsubscribe via the web interface.
Steve Flynn
IBM MVS Operations Analyst
Jacob Bondre [EMAIL PROTECTED] on
If it's supported out of the box,
su to root
sndconfig
Should sort things out
Steve Flynn
IBM MVS Operations Analyst
Fernando Camacho Olmos [EMAIL PROTECTED] on 13/02/2000 17:22:14
Please respond to [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:(bcc: Steve Flynn/UK/Contr/IBM)
"Aaron Zuercher" [EMAIL PROTECTED] wrote:
Hello,
I'm used to using MS Outlook Express and also Agent for email in Windows.
Looking for a comparable program in Linux.
Any Ideas?
Thanks,
Aaron
=
Give KMail a try. Doesn't do html though. Does allow
I have the following in /usr/lib:
libjpeg.a
libjpeg.la*
libjpeg.so - libjpeg.so.6.0.1*
libjpeg.so.6 - libjpeg.so.6.0.1*
libjpeg.so.6.0.1*
libjpeg.so.62 - libjpeg.so.62.0.0*
libjpeg.so.62.0.0*
I am getting an error about libjpeg.so.6 not being a symlink. Is this
correct? Or should
So I guess Mandrake 7.02 supports the SB Live! I have
6.1 and it doesn't. I also screwed up LiLo or
something when I tried to recompile the kernel. If
anyone gets their SB Live working under 6.1 without
having to recompile to the 2.2.5 version of the
kernel, let me know.
--- Joe Knapp
To unsubscribe send a mail to [EMAIL PROTECTED]
and put in the subject :
unsubscribe newbie.
or go to the web page and unsubscribe via the web interface.
This is from an email I got when I first signed up with this
newsgroup. You people are like spammers. Filling up our email
with your damn
Hi Everyone.
Tried running MDKUpdate on my Mandrake 7.0 box. A msg says that it is
finding packages, but then a window popups and there is nothing there. Now
is there no updated packages for version 7.0 or is my Update not working
properly. I've tried choosing different mirrors, but no change.
Update:
Having learned about file and directory permissions, I logged in as root and
attempted to enable write permission for Group and Others for a DOS partition.
Unfortuately, these changes are ignored - when I view the permissions again
they are the same as before (drwxr-xr-x). If I attempt to
Have a look at these files:
/etc/hosts.allow
/etc/hosts.deny
They are probably configured to deny access to everyone except
localhost. To change this, read the man page on hosts.allow by
enterning the following command at a shell prompt...
man hosts.allow
Then edit the host access files
you need in partition magic
On 14-Feb-2000 Russell Simmons wrote:
i have a dual boot box (windoze 98/lm 6.0) on a 5.1 gig wd hd...when i
partitioned the drive i gave 4 gigs to windoz, (c), and i gig to use for
linux, (d), (hda1=windoz, hda2=linux swap, hda3=/, hda4=/home)...i used
linux fdisk
Well,
Today when I tried to logon Linux (I have a dual machine and Windows have no
problems) I could not start XWindows.
The error message that I got is:
execve failed for etc/X11/X (errno 2)
_X11TransSocketUNIXconnect: can't connect: errno = 111
giving up
xinit: connection refused (errno 1110:
Oops. It sounds like you forgot to run lilo after replacing the
vmlinuz file in the /boot directory. I made this mistake a few times
myself when I first started compiling my own kernels.
As for a repair, the only two methods I am aware of are:
1. Boot with a rescue disk, restore your boot
lol... nice vent :)
first rate!
Actually you make a
very good point. If people can't even unsubscribe from a mailing list how
do they ever expect to learn and use a operating system like Linux.
Aaron
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
Thanks Joe
On Sun, 13 Feb 2000, Thomas J. Hamman wrote:
I have a rather generic gamepad that connects to my soundcard... what
would I have to do to get this gamepad to work?
some joystick module included in mandrake. you just have to recompile.
for more information you may take a look at
i'm having the same problem. found a solution yet?
- Original Message -
From: "David Schur" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, February 14, 2000 6:17 PM
Subject: [newbie] Confuguring wu-ftp
I have wu-ftp installed yet i cannot get it to function as an ftp server,
On Tue, 15 Feb 2000, you wrote:
Might be a daft question but what's wrong with ELM and PINE?
You desperate to have a GUI interface?
Steve Flynn
IBM MVS Operations Analyst
They both are nasty when used offline.
On Tue, 15 Feb 2000, Dan Ferris wrote:
Joe Knapp -Technician wrote:
snip
http://www.kdevelop.org
There is another programming IDE for KDE as well, but I can't remember
the name, or the web page.
Code Crusader? dunno if it's kde specific though...
DvB
Your best bet is to uninstall the modem in Windows. Then run a file
called wmregdel.exe from the Win98 CD.
Shutdown the computer
Jumper the modem for Com2
Restart the computer
Install the modem when it's detected in Windows
Then you should have no more worries.
Ty
--
Ty Mixon
e-mail:
If you gusy want you can just pay $20 for the drivers from
www.opensound.com. You get 2 years of free updates. Its the easiest thing
for your SBlive! =)
John
- Original Message -
From: James Luongo [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, February 15, 2000 11:19 AM
This card is supported in version 7.0 as well as it is supported in Red
Hat 's beta 6.2 Piglet, Although it seems that the mandrake version had
no problems with install. The Rage All in Wonder Pro 128 has problems
when it comes to the screen becoming blured and destored. It works
however if you
What I'd love to know is what went wrong when I had Mandrake 7.0 use a 2 GB
space which was unused space but physically situated within an extended
Windows partition (that was the easiest way to install Corel Linux). I didn't
actually resize any FAT partitions (just had DiskDrake create the
Try StarOffice.
But, I'm still looking for a linux email client that can handle multiple accounts for
sending.
Seve
-Original Message-
From: Aaron Zuercher [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Tuesday, February 15, 2000 12:57 PM
Subject: Re: [newbie] Can
I went to www.thelinuxgurus.org for the how-to on configuring CD drives.
I followed the instructions and when I type 'make menuconfig' I get an error
message that states "No rule to make target "menuconfig" Stop.
So now what do I do?
- Original Message -
From: "Eunice Thompson" [EMAIL
Domain A and Domain B won't communicate. The PDC on Domain B's IP address is
128.168.0.2.
All the servers are NT except for the router which is linux.
Router - Linux (Mandrake)
Linksys card IP - 192.168.0.19 (255.255.255.0) (Static)
3Com Nic - 128.168.0.3 - (255.255.0.0)
I am using a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 15 Feb 2000, you wrote:
At 01:38 AM 2/15/00 -0500, you wrote:
Is there a way to get linux to detect my USR internal 56k modem when the
cards jumpers are set to PnP?
Right now I have to set the jumpers to PnP to work with windows and set
Dan Ros wrote:
Any ideas why?
Thanks.
--
http://www.uplink.freeuk.com - ICQ: 15212336
No witty comment or quote required.
Yeah, it's a bug. You can't go up to "/" root (hangs) and some vfat
partitions, you can't use regular mount (hangs). If it's a vfat
partition, you can edit the
Kit wrote:
How do you uninstall a bad install of 7.0 CD...and then re-install 6.1?
also, I tried a hayes smartmodem 2400 (external) just to see if it would
connect...and it wouldn't.
Got any ideas...
also, WHERE is KPPP on the CD? what's the RPM called...?
isn't the above modem a
I don't believe it's advisable to create a partition within space that's
"physically situated within an extended Windows partition." Partitions
inside partitions are a no-no... if I'm understanding the situation
correctly, that is.
I'm surprised Disk Drake let you do that. I'd consider that a
Here's a message that was sent to this list a while back and which I
used to get my cdrw working (the URL included in the message should help
you to get scsi working).
DvB
Date: Tue, 28 Sep 1999 23:13:38 -0500
From: Paul Benjamin [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL
My installation gets to "Setup Filesystems", but then it stops
and says "no free partitions". I have 2 partitions, both
absolutely empty, so I don't understand it! PLEASE HELP!
Get your own "800" number - Free
Free voicemail, fax, email, and
I have noticed that my computer will often go into periods of furious disk
access at very odd hours so, last time it happened, I decided to take a
look and see what was going on (I also wanted to get to sleep).
My search turned up a find process running as root for no apparent reason
at all so I
1 - 100 di 120 matches
Mail list logo