On Thu, 2 May 2002 13:26:02 +0200
Mino [EMAIL PROTECTED] wrote:
Cari amici, quale programma mi consigliate per tenere sotto controllo la
temperatura, velocità ventola etc.
Della mia MDK8.2(c_e_ forze qualcosa sui cd di inst.?).
Grazie a presto
Mino Mitrugno
lmsensors + gtkrelm
(non ci
Alle 19:16, domenica 9 marzo 2003, ellkway ha scritto:
Ho due domandine : mdk9-conexantHSF
l'rpm driver per conexant nel cd international+documentation
...e questo che è? Mdk allega forse a distribuzioni a pagamento i driver per
softmodem?
mi ha creato il device dev/ttySHSF0 e controllo con
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Ciao a tutti!
Quesito del giorno:
Ho installato Samba (e sembra funzionare tutto benissimo), però siccome
sono in un posto dove i computer che condividono non stanno sempre
connessi, vorrei trovare un modo per fargli montare/smontare i computer
On Sunday 09 March 2003 8:47 pm, Alessandro Piaser wrote about Re: [newbie-it]
[EMAIL PROTECTED]: prestazioni e programmi correlati:
- Original Message -
Ora che ho tutto a posto potrei farmi l'rpm?
cioe' l'hai installato da sorgenti e vuoi farti l'rpm?
mh, perche'?:-)
Comunque c'e'
On Monday 10 March 2003 9:39 am, Andrea Celli wrote about Re: [newbie-it]
Monitoraggio temperatura:
lmsensors + gtkrelm
gkrellm
c'era anche credo qualcosa che si chiamava ksensors,
per il kde.
bye
--
Devil Inside Experiment - C'era un bambino che odiava la polizia
Alle 21:37, venerdì 7 marzo 2003, greg ha scritto:
Rassegnazione!?! Non so da dove iniziare...
Ho visitato l'indirizzo che è stato l'incubo di questo nostro scambio
di mail con il win... ho usato netscape7, l'applet viene caricata e...
niente! Non succede proprio niente!! Si vede sì la
Ciao a tutti, sto' cercando di installare Kylix3 open su Mandrake 9.0 ma
ottengo il seguente errore:
BORLAND KYLIX 3
Checking dependencies...
Kernel version = 2.2.0OK
Glibc version = 2.1.2OK
X11 ServerOK
Libjpeg version = 6.2.0OK
Libgtk version
qlcno mi potrebbe consigliare un buon How-to per Samba?
Grazie ciao
Sorry ma non ho capito quando ti appare questo errore...
L'unico probelma che ho incontrato è che per installarlo bisogna
loggarsi come user e non root altrimenti non funzica.
ciao davide
V.Castelli wrote:
Ciao a tutti, sto' cercando di installare Kylix3 open su Mandrake
9.0 ma
ottengo il
Il lun, 2003-03-10 alle 20:05, freefred ha scritto:
lmsensors + gtkrelm
gkrellm
c'era anche credo qualcosa che si chiamava ksensors,
per il kde.
E lm_sensors :-D
Ricordo di aver tentato di usare un app in gtk, tempo fa, se la
rintraccio posto il nome; poi c'è Hot-Babe... :-DD
Corrado
- Original Message -
From: freefred [EMAIL PROTECTED]
Ora che ho tutto a posto potrei farmi l'rpm?
cioe' l'hai installato da sorgenti e vuoi farti l'rpm?
mh, perche'?:-)
Per il semplice fatto che sono alla ricerca di spazio e pensavo di eliminare
i circa 200Mb tra compilatore e
Il mar, 2003-03-11 alle 00:57, Alessandro Piaser ha scritto:
Quelli non mancano mai, ma sempre da quel che ho letto per l'utente o
acquirente che dir si voglia comporta il decadimento della garanzia.
Chissà come mai Bill non garantisce? sarà il suo software bacato che
funziona una volta sola
On Monday 10 Mar 2003 7:57 am, Mungandi, Fred wrote:
Hi,
I am a newbie to Linux. I have Mandrake 9.0 on a Compaq ML310 server with
512 MB memory, 2.0 Ghz P4 processor. The server has an integrated NC7760
PCI Gigabit network adapter which gets detected alright. I proceed to
assign an IP
On Sun, 2003-03-09 at 23:19, Derek Jennings wrote:
On Sunday 09 Mar 2003 8:51 pm, Margot wrote:
Now that I've got the internet connection working, I'm trying to get
everything running through the Mandrake machine, aiming to abandon the
Win98 machine as soon as possible.
Derek wrote:
Stephen Kuhn wrote:
On Mon, 2003-03-10 at 12:44, Yoel P. Krigsman wrote:
Hello Folks:
I am not able to figure out how I can install the printer driver to my
Linux 9.0.
Can someone give me guidiance?
Thanks!
YPK
Have you tried going through the Mandrake Control Center to add the
Len Lawrence wrote:
On Sun, 09 Mar 2003 19:59:46 +
John Richard Smith [EMAIL PROTECTED] wrote:
Are you working with M9.0
No, 8.2, but 9.0 has the broken Fontmap link. The msfonts directory is one
I created to store downloaded MS TrueType fonts.
I think that my Fontmap
To anybody interested, I submitted this to Bugzilla (finally figured out
how to use the damn thing) and heard back from a developer that I was not
prompted for CDs 2 and 3 because I had less than 64MB on that machine.
With 64MB or more, the install makes a RAMdisk and the installation runs
from
According to the Mandrake Hardware Database page:
http://www.linux-mandrake.com/en/hardware.php3
your printer isn't listed as supported.
However, I do know my HP wasnt supported a couple of years ago, and worked
if I used the 612 driver, and my printer was actually a 800 series printer.
Brian D.
Klar Brian D Contr MSG/SICN wrote:
According to the Mandrake Hardware Database page:
http://www.linux-mandrake.com/en/hardware.php3
your printer isn't listed as supported.
However, I do know my HP wasnt supported a couple of years ago, and worked
if I used the 612 driver, and my printer was
I now have Mozilla 0.98 and Galeon 1.0.3, which came as RPMs with
Mandrake 8.2. I need to update them to more recent version. In the case
of Mozilla, I need also to install the Spanish language pack, which I
have been unable to do with 0.98. As best I can tell from reading
previous messages on
On Monday 10 March 2003 10:51 am, Warren Post wrote:
I now have Mozilla 0.98 and Galeon 1.0.3, which came as RPMs with
Mandrake 8.2. I need to update them to more recent version. In the case
of Mozilla, I need also to install the Spanish language pack, which I
have been unable to do with 0.98.
I normally upgrade using the tarball from mozilla.org.
1. delete /usr/local/mozilla (don't know if it is necessary)
2. run the mozilla-installer you downloaded and untarred, as root
3. run mozilla as root, exit after it starts
4. run as normal user.
5. update the links to the plugins (Flash,
On Monday 10 Mar 2003 7:12 pm, Brian wrote:
!DOCTYPE html PUBLIC -//W3C//DTD HTML 4.01 Transitional//EN
html
head
title/title
/head
body
So if I understand this correctly, then the NTFS support in Mandrake 9.0
is read-only? nbsp;I did just try to write to an NTFS partition on my test
On Monday 10 March 2003 08:12 pm, Brian wrote:
Brian, please do not send to the list in html. It's a waste
of bandwidth and some people may be very pissed off.
Then, to your questions :
So if I understand this correctly, then the NTFS support
in Mandrake 9.0 is read-only?
Yes, but rumours
Brian wrote:
So if I understand this correctly, then the NTFS support in Mandrake
9.0 is read-only? I did just try to write to an NTFS partition on my
test computer and it did not work. In that case, is there any third
party drivers or utilities that will allow you to write to an NTFS
On Monday 10 March 2003 02:12 pm, Brian wrote:
!DOCTYPE html PUBLIC -//W3C//DTD HTML 4.01 Transitional//EN
html
head
title/title
/head
body
So if I understand this correctly, then the NTFS support in Mandrake 9.0
is read-only? nbsp;I did just try to write to an NTFS partition on my test
I have installed vmware 3.2 onto my all scsi system:
p3-450mhz
512mb ram
2940u2w scsi card
ibm 18g scsi HD
pioneer scsi dvdrom
I ran the vmware-config.pl script and it seemed to get me going. I created
a new vm w/ 176mb ram and 4g space. The HD was setup ok inside the VM, but
the cdrom was set
On Monday 10 March 2003 19:49, Richard Urwin wrote:
On Monday 10 Mar 2003 6:10 pm, H.J.Bathoorn wrote:
Hi all,
I'm in a bit of a spot.somebody at office asumed he sent me a
presentation (to be translated) but somehow never did.
The office is closed now i.e. no-one there.
I can
It takes a few minutes to mount a CDROM on my drive using Mandrake 9.0.
This is too long.
I have a dual-boot machine, choice of SuSE or Mandrake. There is no
working Microsoft software on the machine. With SuSE it takes less
than a second to mount the CDROM.
I suspect very strongly that this
On Monday 10 March 2003 04:17 pm, Hendrik Boom wrote:
It takes a few minutes to mount a CDROM on my drive using Mandrake 9.0.
This is too long.
I have a dual-boot machine, choice of SuSE or Mandrake. There is no
working Microsoft software on the machine. With SuSE it takes less
than a
It's simpler to type the following on the commandline as root:
supermount disable
and to make it permanent:
supermount -i disable
Miark
On Mon, 10 Mar 2003 16:41:45 -0500
Mike [EMAIL PROTECTED] wrote:
I solved this problem by disabling supermount on my removable drives.You can
do
On Sunday 09 Mar 2003 8:51 pm, Margot wrote:
Now that I've got the internet connection working, I'm trying to get
everything running through the Mandrake machine, aiming to abandon the
Win98 machine as soon as possible.
Margot - You are UK, I believe? I have hsbc on-line banking. Under
So far, so good, with thanks to Raffaele and Todd for suggesting that I
use a tarball and not RPM. I had to kill my /user/.mozilla file before
the Spanish language pack would work, but that's no problem. Thanks
again.
--
Warren Post
Santa Rosa de Copán, Honduras
http://srcopan.vze.com/
Want to
On Monday 10 Mar 2003 9:12 pm, H.J.Bathoorn wrote:
Luckily some of the others did recieve the attachment and were able to
forward it to me. Just shows you're never safe enough.
Ahh. Chaotic Backup: Send your files to lots of other people and then copy
them back when you loose them.
Glad to
Anne Wilson wrote:
On Sunday 09 Mar 2003 8:51 pm, Margot wrote:
Now that I've got the internet connection working, I'm trying to get
everything running through the Mandrake machine, aiming to abandon the
Win98 machine as soon as possible.
Margot - You are UK, I believe? I have hsbc
Azrael wrote:
Send me all your bank details, your cheque book (sign a few for me),
credit cards, etc and I'll do it all for you :):):)
What a kind offer! You Mandrake users are so sweet! I don't have any
credit cards, and the cheques are a bit rubbery at the moment, but if
you could pay in a
et wrote:
On Sunday 09 March 2003 04:08 pm, Ralph Slooten wrote:
On Sun, 09 Mar 2003 20:51:10 +
Margot [EMAIL PROTECTED] wrote:
Is there a way round this?
Recently I also opted in for Online banking here in Holland. I was worried
about the possible Window$-only thing, so I
On Mon, 2003-03-10 at 13:15, Pablo E. Fernandez L. wrote:
I have downloaded this file from adobe:
linux-ar-405.tar.gz
Then typed:
tar -zxvf linux-ar-405.tar.gz
cd ILINXR.install
./INSTALL
Typed accept for user license.
enter to install in default directory /usr/local/Acrobat4.
Hi,
You should try to use a RPM file for AcroReader. You can get it from
http://rpm.pbone.net
Cheers,
Kishi
Adolfo Bello [EMAIL PROTECTED] wrote:
On Mon, 2003-03-10 at 13:15, Pablo E. Fernandez L. wrote:
I have downloaded this file from adobe:
linux-ar-405.tar.gz
Then typed:
On Mon, 2003-03-10 at 15:12, Brian wrote:
So if I understand this correctly, then the NTFS support in Mandrake
9.0 is read-only? I did just try to write to an NTFS partition on my
test computer and it did not work. In that case, is there any third
party drivers or utilities that will allow
At 03:44 PM 3/8/03, Frank Bax wrote:
When I installed Mandrake 9.0 - I was able to so via ftp. Now, everytime
I startup the system, no network is available until I run the connection
wizard in MCC (accepting all default answers).
The following entries appear in syslog during bootup:
Mar 8
Just a quick question - in Konqueror, why are buttons incorrectly displayed?
They look just like a white box with a black line around them. The text is
not there. I would just like to know how to make Konqueror display buttons
correctly. Thanks!
John Drouhard
Want to buy your Pack or Services
On Monday 10 March 2003 03:55 pm, John Michael Drouhard wrote:
Just a quick question - in Konqueror, why are buttons incorrectly
displayed? They look just like a white box with a black line around them.
The text is not there. I would just like to know how to make Konqueror
display buttons
On Mon, 2003-03-10 at 15:55, John Michael Drouhard wrote:
Just a quick question - in Konqueror, why are buttons incorrectly displayed?
They look just like a white box with a black line around them. The text is
not there. I would just like to know how to make Konqueror display buttons
Ddc750Nt wrote:
Hi Everyone I need help to set up my 9.0 box to printer to my printer server on my
lan The windows Machines can print to it using prt local port The print server is a
Barricade router with the print server built in
I have tried but I can not get it to woth with Linux
I have just installed Mandrake 9.0 onto my computer and I am interested in
installing Oracle 9i onto the comp as well. I have just downloaded the
Oracle 9i Database for Linux software from Oracle.com. Does anyone know
anything, or have any experience with this?
If so, please help me. If you
On Thu, 6 Mar 2003 09:33:05 +
Anne Wilson [EMAIL PROTECTED] wrote:
On Thursday 06 Mar 2003 9:03 am, John Richard Smith wrote:
Len Lawrence wrote:
On Wed, 05 Mar 2003 10:54:11 +
John Richard Smith [EMAIL PROTECTED] wrote:
Len Lawrence wrote:
Thanks for your comments John.
- Original Message -
From: Adolfo Bello [EMAIL PROTECTED]
To: MDK Mandrake [EMAIL PROTECTED]
Sent: Monday, March 10, 2003 8:36 PM
Subject: Re: [newbie] Windows XP and Mandrake 9.0 - Dual Boot
Winblows don't support any Linux file system. So put Winblows
partitions
first because it will
48 matches
Mail list logo
