Re: [IVI] Tizen IVI for PC ( Failed to get Wayland terminal on Laptop)

[VanCutsem, Geoffroy]

From: Bhushan Dhadway [mailto:bhushan.dhad...@igate.com]
Sent: Tuesday, August 25, 2015 11:01 AM
To: VanCutsem, Geoffroy; ivi@lists.tizen.org
Subject: RE: Tizen IVI for PC ( Failed to get Wayland terminal on Laptop)

Hello Geoffroy,

>> Where exactly does it stop?

We tried to use Ctrl+Alt+Fn key to shift to terminals to check the logs. But we 
arent able to use this functionality.
Hence we don't have any logs to share where it exactly stops.
[Geoffroy] Do you at least see the kernel logs on the screen? If not, try to 
remove the 'quiet' keyword from the kernel command-line option (bootloader). We 
had disabled many (if not all, not sure anymore) of these TTY, do you have 
access to those on your desktop PC?

Basically, we aren't  able to see the blue weston terminal which we expected.
>> What is the graphics card in your Dell latpop?
Intel(r) HD Graphics Family
[Geoffroy] Which generation? IIRC, I've seen some issues with 'old' (a relative 
term) graphics card.

Thanks & Regards,
Bhushan Dhadway

From: VanCutsem, Geoffroy [mailto:geoffroy.vancut...@intel.com]
Sent: Tuesday, August 25, 2015 9:41 AM
To: Bhushan Dhadway; ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: RE: Tizen IVI for PC ( Failed to get Wayland terminal on Laptop)



From: IVI 
[mailto:ivi-boun...@lists.tizen.org]<mailto:[mailto:ivi-boun...@lists.tizen.org]>
 On Behalf Of Bhushan Dhadway
Sent: Tuesday, August 25, 2015 7:38 AM
To: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: [IVI] Tizen IVI for PC ( Failed to get Wayland terminal on Laptop)

Hi,
I tried to create live usb for Tizen IVI and tried to boot on my Dell laptop, 
but it failed to show the wayland terminal.
[Geoffroy] Where exactly does it stop? What is the graphics card in your Dell 
latpop?
If i boot on my desktop PC it shows the  wayland terminal.
 I tried to change output/name/mode for various combination in the 
/etc/xdg/weston-user.ini file but it didn't worked?
Could you please suggest what might be the issue?
Thanks & Regards,
Bhushan D


~~Disclaimer~~~
Information contained and transmitted by this e-mail is confidential and 
proprietary to IGATE and its affiliates and is intended for use only by the 
recipient. If you are not the intended recipient, you are hereby notified that 
any dissemination, distribution, copying or use of this e-mail is strictly 
prohibited and you are requested to delete this e-mail immediately and notify 
the originator or mailad...@igate.com<mailto:mailad...@igate.com>. IGATE does 
not enter into any agreement with any party by e-mail. Any views expressed by 
an individual do not necessarily reflect the view of IGATE. IGATE is not 
responsible for the consequences of any actions taken on the basis of 
information provided, through this email. The contents of an attachment to this 
e-mail may contain software viruses, which could damage your own computer 
system. While IGATE has taken every reasonable precaution to minimise this 
risk, we cannot accept liability for any damage which you sustain as a result 
of software viruses. You should carry out your own virus checks before opening 
an attachment. To know more about IGATE please visit 
www.igate.com<http://www.igate.com>.


~~Disclaimer~~~
Information contained and transmitted by this e-mail is confidential and 
proprietary to IGATE and its affiliates and is intended for use only by the 
recipient. If you are not the intended recipient, you are hereby notified that 
any dissemination, distribution, copying or use of this e-mail is strictly 
prohibited and you are requested to delete this e-mail immediately and notify 
the originator or mailad...@igate.com<mailto:mailad...@igate.com>. IGATE does 
not enter into any agreement with any party by e-mail. Any views expressed by 
an individual do not necessarily reflect the view of IGATE. IGATE is not 
responsible for the consequences of any actions taken on the basis of 
information provided, through this email. The contents of an attachment to this 
e-mail may contain software viruses, which could damage your own computer 
system. While IGATE has taken every reasonable precaution to minimise this 
risk, we cannot accept liability for any damage which you sustain as a result 
of software viruses. You should carry out your own virus checks before opening 
an attachment. To know more about IGATE please visit 
www.igate.com<http://www.igate.com>.

Re: [IVI] Tizen IVI for PC ( Failed to get Wayland terminal on Laptop)

[VanCutsem, Geoffroy]

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Bhushan Dhadway
Sent: Tuesday, August 25, 2015 7:38 AM
To: ivi@lists.tizen.org
Subject: [IVI] Tizen IVI for PC ( Failed to get Wayland terminal on Laptop)

Hi,
I tried to create live usb for Tizen IVI and tried to boot on my Dell laptop, 
but it failed to show the wayland terminal.
[Geoffroy] Where exactly does it stop? What is the graphics card in your Dell 
latpop?
If i boot on my desktop PC it shows the  wayland terminal.
 I tried to change output/name/mode for various combination in the 
/etc/xdg/weston-user.ini file but it didn't worked?
Could you please suggest what might be the issue?
Thanks & Regards,
Bhushan D


~~Disclaimer~~~
Information contained and transmitted by this e-mail is confidential and 
proprietary to IGATE and its affiliates and is intended for use only by the 
recipient. If you are not the intended recipient, you are hereby notified that 
any dissemination, distribution, copying or use of this e-mail is strictly 
prohibited and you are requested to delete this e-mail immediately and notify 
the originator or mailad...@igate.com. IGATE does 
not enter into any agreement with any party by e-mail. Any views expressed by 
an individual do not necessarily reflect the view of IGATE. IGATE is not 
responsible for the consequences of any actions taken on the basis of 
information provided, through this email. The contents of an attachment to this 
e-mail may contain software viruses, which could damage your own computer 
system. While IGATE has taken every reasonable precaution to minimise this 
risk, we cannot accept liability for any damage which you sustain as a result 
of software viruses. You should carry out your own virus checks before opening 
an attachment. To know more about IGATE please visit 
www.igate.com.

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: [IVI] [Dev] Video Media Playback in Web Application

[VanCutsem, Geoffroy]

Hi Joel,

These links are from the Tizen Native Programming environment which is not 
supported in IVI.

Kevron’s response is spot on, the way to get this to work is to enable 
additional codecs for Crosswalk (specifically the ones that need EULA set to 1).

Geoffroy

Technical Marketing Engineer Manager
Open-Source Technology Centre
Tel: +32 (0)3 450 0851

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: Dev [mailto:dev-boun...@lists.tizen.org] On Behalf Of Mertz, Joel
Sent: Thursday, April 16, 2015 6:41 PM
To: McGee, Art
Cc: ivi@lists.tizen.org; 
um-pd-engineering-electrical-infotainment-...@jaguarlandrover.com; 
genivi-...@mail.genivi.org; d...@lists.tizen.org
Subject: Re: [Dev] Video Media Playback in Web Application

The popular H.264 codec (.mp4) is supported by Tizen: Supported Multimedia 
Formats

I think the Tizen::Media::Player 
class
 (is this an extension?) needs to be included in order to enable the 
functionality however.




Joel Mertz

Graphics Developer

jme...@jaguarlandrover.com



Jaguar Land Rover North America, LLC

1419 NW 14th Ave, Portland, OR 97209

JaguarUSA.com  |  
LandRoverUSA.com

On Thu, Apr 16, 2015 at 8:09 AM, McGee, Art 
mailto:amcg...@jaguarlandrover.com>> wrote:
I was thinking of using https://ffmpeg.org/ we need to capture a segment of 
video for sharing on social media.  I will need to build the package for Tizen.

Thanks,

On 15 April 2015 at 20:30, Rees, Kevron 
mailto:kevron.m.r...@intel.com>> wrote:
There is a way, but it involves recompiling gstreamer-plugins-* (good, bad and 
ugly) and enabling the codecs that have been disabled because of IP/licensing 
restrictions.

On Wed, Apr 15, 2015 at 2:44 PM, McGee, Art 
mailto:amcg...@jaguarlandrover.com>> wrote:
I am using the html5 video tag.

Thanks,

On 15 April 2015 at 14:41, McGee, Art 
mailto:amcg...@jaguarlandrover.com>> wrote:
I am able to get video to playback in the ogg video file format but none others 
it seems.  I'd like to play other formats.  Is there a way to add codecs to the 
filesystem so that others will play?  I'd like to add mov and mp4 playback to 
the system.  Thanks in advance for your assistance.

--
Art McGee
Infotainment Engineer

[http://www.jaguarlandrover.com/email/jlr.jpg]

Jaguar Land Rover North America, LLC
1419 NW 14th Ave, Portland, Oregon, 97209
JaguarUSA.com  |  
LandRoverUSA.com




--
Art McGee
Infotainment Engineer

[http://www.jaguarlandrover.com/email/jlr.jpg]

Jaguar Land Rover North America, LLC
1419 NW 14th Ave, Portland, Oregon, 97209
JaguarUSA.com  |  
LandRoverUSA.com


___
Dev mailing list
d...@lists.tizen.org
https://lists.tizen.org/listinfo/dev




--
Art McGee
Infotainment Engineer

[http://www.jaguarlandrover.com/email/jlr.jpg]

Jaguar Land Rover North America, LLC
1419 NW 14th Ave, Portland, Oregon, 97209
JaguarUSA.com  |  
LandRoverUSA.com


___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: [IVI] Can not enable wifi on IVT1100

[VanCutsem, Geoffroy]

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of RayBloodworth
Sent: Friday, March 20, 2015 2:17 AM
To: Rees, Kevron M
Cc: ivi@lists.tizen.org
Subject: Re: [IVI] Can not enable wifi on IVT1100

Thanks for your reply!

 > What wlan/bt chip is it? What does dmesg say when you plug in the wifi 
 > device?
RT3090, It's not a hot plug device, I plugged it into the slot on mainboard 
before system boot up.
Do you have any ideas?
You'll need to add the driver for this. I don't know if there is an upstream 
driver you could simply enable in the kernel or if you'll need to get it from 
some other source and compile it... but the lack of driver is why it is not 
showing up in ConnMan.


> Date: Thu, 19 Mar 2015 08:42:53 -0700
> Subject: Re: [IVI] Can not enable wifi on IVT1100
> From: kevron.m.r...@intel.com
> To: k870818...@outlook.com
> CC: ivi@lists.tizen.org
>
> What wlan/bt chip is it? What does dmesg say when you plug in the wifi device?
>
> On Thu, Mar 19, 2015 at 5:08 AM, RayBloodworth 
> mailto:k870818...@outlook.com>> wrote:
> > Hi, everyone
> >
> > For using wifi/bt with IVT1100, I plugged a wlan/bt chip in IVT1100. But
> > I can not enable wifi with "connmanctl".
> >
> > #connmanctl enable wifi
> > Error wifi:Method "SetProperty" with signature "sv" on interface
> > "net.connman.Technology" doesn;t exist
> >
> > Also, there's no wifi technology with this command:
> > #connmanctl
> > connmanctl> techonologies
> > /net/connman/technology/bluetooth
> >
> > Could anyone help me?
> >
> > BR,
> > Ray
> >
> > ___
> > IVI mailing list
> > IVI@lists.tizen.org
> > https://lists.tizen.org/listinfo/ivi
> >
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: [IVI] Tizen IVI-3.0 Image Boot Problem

[VanCutsem, Geoffroy]

The other thing to possibly watch out for is whether this is a 32-bit EFI 
bootloader you currently have on the VTC-1010. In general, you need a 64-bit 
EFI bootloader to boot a 64-bit image (which is what you are trying to do). In 
the case of MinnowboardMAX, they provide 2 different firmware (a 32-bit one and 
a 64-bit one), I’m not sure what the situation is for the VTC-1010 (I’ve only 
tried to load 32-bit Tizen IVI images so far).

Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Michael Johnson
Sent: Wednesday, February 04, 2015 8:34 PM
To: Hofemeier, Ulf; Bugra Cakir; ivi@lists.tizen.org
Subject: Re: [IVI] Tizen IVI-3.0 Image Boot Problem

If you have a gpt partition table, you might have to use gdisk from a terminal 
to set the attributes on the boot partition.

for example:

gdisk /dev/sda

x (expert)
a (attributes)

select partition 1 and then make it bootable.

I also relocate the backup to the end of the disk.

Hope that helps.





MICHAEL JOHNSON
Embedded Software Engineer

Tel. +441962868866 | Winchester, United Kingdom | 
Twitter

[www.symphonyteleca.com]

Teleca Limited, a company registered in England & Wales, registration number 
2773878, registered office at Sunley House, 46 Jewry Street, Winchester, 
Hampshire SO23 8RY. VAT registration number GB 674 6583 90

Please consider the environment before you print.

Notice to recipient: This e-mail (including any attachments) is meant for the 
intended recipient only, may contain confidential and proprietary information, 
and is protected by law. If you received this e-mail in error, please 
immediately notify the sender of the error by return e-mail, delete this 
communication and any attachments, and shred any printouts. Unauthorized 
review, use, dissemination, distribution, copying or taking of any action based 
on this communication is strictly prohibited.

From: IVI [ivi-boun...@lists.tizen.org] on behalf of Hofemeier, Ulf 
[ulf.hofeme...@intel.com]
Sent: 04 February 2015 7:21 PM
To: Bugra Cakir; ivi@lists.tizen.org
Subject: Re: [IVI] Tizen IVI-3.0 Image Boot Problem
Please try to decompress the bzip2 image to stdout using bzcat –dc  image.bz2 | 
dd of=/dev/sda.

Thanks,
Ulf

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Bugra Cakir
Sent: Wednesday, February 04, 2015 11:18 AM
To: ivi@lists.tizen.org
Subject: [IVI] Tizen IVI-3.0 Image Boot Problem

Hi,

My hardware platform and version are like this;

Nexcom VTC 1010 Bios Firmware MV11A119.rom
Tizen IVI Image : 
tizen-3.0-ivi_20150201.3_ivi-efi-x86_64-sdb.raw.bz2

I boot the system with a USB stick with SysrescueLinux. Also I copied the Tizen 
IVI-3.0 image to USB stick.
I successfully write the Tizen IVI-3.0 image to the harddrive on this hardware 
platform with this command

# bzcat  
tizen-3.0-ivi_20150201.3_ivi-efi-x86_64-sdb.raw.bz2
 | dd of=/dev/sda bs=512k oflag=sync conv=sparse

After that I sync the filesystem and list the available partitions on the 
harddrive with fdisk -l command.
it shows that there are two partitions on it.
/dev/sda1   EFI
/dev/sda2   Microsoft ...

When I reboot the system and set the default boot to the harddrive, the system 
cannot boot from the Tizen IVI image partition I've
created before. What can be the problem behind this ?


Best,
Bugra

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: [IVI] tizen-distro: booting (was: Re: tizen-distro : memory allocation error whenlinkingcrosswalk)

[VanCutsem, Geoffroy]

Hi Olivier,

Do you know if the video drivers you have tested with (i915, vmwgfx, nouveau) 
were built-in or available as modules?

Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Olivier Delbeke
Sent: Friday, January 30, 2015 3:47 PM
To: Ohly, Patrick
Cc: ivi@lists.tizen.org
Subject: Re: [IVI] tizen-distro: booting (was: Re: tizen-distro : memory 
allocation error whenlinkingcrosswalk)


Thanks a lot for your support.

FYI, I finally got a picture ! All I needed to do was to use the magic 
"security=none". But of course, it's not very satisfying ; it should work 
without that. Please let me know if it works better with the new kernel patches.

About the wayland-egl error message ("libEGL warning: wayland-egl: could not 
open /dev/dri/card0 (Permission denied)"), I think I understood what happens :
- libwayland-egl is used by all wayland clients
- libwayland-egl need to open /dev/dri/card0
- the wayland clients are run as user 'app'
- /dev/dri/card0 is owned by group 'video'
- user 'app' is not a member of group 'video' => denied access
As a test, I tried to add the user "app" to group "video" (with "usermod -a -G 
video app"), but got a "PAM authentication failure". I don't know how to 
overcome this without recompiling the file system.

Best regards,
[cid:image001.jpg@01D03CA9.4A409370]



Olivier Delbeke Senior Software Engineer
olivier.delb...@awtce.be / T. +32 2 389 25 53

 AWTC Europe S.A. - Avenue de l’Industrie, 19 - 1420 Braine-l’Alleud - Belgium 
- www.aweurope.eu - 
www.aisin-aw.co.jp
VAT : BE 0474.474.114 - RPM Nivelles



[Inactive hide details for Patrick Ohly ---01/30/2015 03:03:23 PM---Patrick 
Ohly ]Patrick Ohly ---01/30/2015 03:03:23 PM---Patrick 
Ohly mailto:patrick.o...@intel.com>>
Patrick Ohly mailto:patrick.o...@intel.com>>

01/30/2015 03:03 PM


To


Olivier Delbeke mailto:olivier.delb...@awtce.be>>


cc


"Litkey, Krisztian" 
mailto:krisztian.lit...@intel.com>>, 
"ivi@lists.tizen.org" 
mailto:ivi@lists.tizen.org>>


Subject


Re: [IVI] tizen-distro: booting (was: Re: tizen-distro : memory allocation 
error whenlinkingcrosswalk)








On Fri, 2015-01-30 at 14:25 +0100, Olivier Delbeke wrote:
> Some more info:
> Reference hardware (VTC1010), reference kernel (bzImage_ivi) and
> reference image (tizen-ivi-core-image-dev-valleyisland-32.ext3) (links
> found on the wiki
> https://wiki.tizen.org/wiki/Build_Tizen_with_Yocto_Project) , but
> black screen when weston starts.

I've looked at the kernel used by the "Tizen on Yocto" today and found
that it lacks quite a few patches that went into "Tizen IVI", in
particular for the graphics drivers. I'm not sure whether these are
relevant differences, but will test it once a build with a refreshed
kernel recipe is done.

Regarding the previous releases: I don't know whether any image really
ever was tried on the VTC1010.

--
Best Regards, Patrick Ohly

The content of this message is my personal opinion only and although
I am an employee of Intel, the statements I make here in no way
represent Intel's position on the issue, nor am I authorized to speak
on behalf of Intel on this matter.




This mail, and any attachments thereto, is intended only for use by the 
addressee(s) named herein and may contain legally privileged and/or 
confidential information. If you are not the intended recipient, please note 
that any review, dissemination, disclosure, alteration, printing, copying or 
transmission of this mail and/or any file transmitted with it, is strictly 
prohibited and may be unlawful. If you have received this mail by mistake, 
please immediately notify the sender as well as our mail administrator at 
postmas...@aweurope.be, and permanently destroy 
the original as well as any copy thereof.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: [IVI] tizen-distro : memory allocation error whenlinkingcrosswalk

[VanCutsem, Geoffroy]

Hi Olivier,

We typically test our images on Baytrail-I (Intel GPU) systems such as the 
Nexcom VTC-1010 (or the MinnowboardMAX) although other systems (e.g. NUCs) are 
known to work. VMware works with some limitations. I’m not convinced at this 
stage it’s an issue with your combination of graphics driver/stack as we see it 
too on our reference hardware. I _believe_ you can still use ssh with the 
following credentials: user: root, password: tizen

Geoffroy


---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: Olivier Delbeke [mailto:olivier.delb...@awtce.be]
Sent: Thursday, January 29, 2015 12:27 PM
To: VanCutsem, Geoffroy
Cc: ivi@lists.tizen.org
Subject: RE: [IVI] tizen-distro : memory allocation error whenlinkingcrosswalk


Hi Geoffroy,

As the image does not work on my PC, I tried on VMWare.
There, the result is much better : kernel starts, many systemd targets are 
started (2 of them fails but I can't read fast enough to tell which ones), 
finally, the window size changes and the screen becomes completely black. I 
assume that it means that Wayland is started. I tried with and without 3D 
acceleration and got the same result. If I knew the SSH username/password, I 
could probably gather some more info. What is it ?

More generally, which hardware is supported ? My laptop and VMWare don't seem 
to work. So what should I use ?

Best regards,
[cid:image001.jpg@01D03BDA.D72DB2B0]



Olivier Delbeke Senior Software Engineer
olivier.delb...@awtce.be<mailto:olivier.delb...@awtce.be> / T. +32 2 389 25 53

 AWTC Europe S.A. - Avenue de l’Industrie, 19 - 1420 Braine-l’Alleud - Belgium 
- www.aweurope.eu<http://www.aweurope.eu> - 
www.aisin-aw.co.jp<http://www.aisin-aw.co.jp>
VAT : BE 0474.474.114 - RPM Nivelles



[Inactive hide details for "VanCutsem, Geoffroy" ---01/28/2015 06:35:53 
PM---"VanCutsem, Geoffroy" mailto:geoffroy.vancut...@intel.com>>
"VanCutsem, Geoffroy" 
mailto:geoffroy.vancut...@intel.com>>

01/28/2015 06:35 PM


To


Olivier Delbeke mailto:olivier.delb...@awtce.be>>, 
"ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>" 
mailto:ivi@lists.tizen.org>>


cc




Subject


RE: [IVI] tizen-distro : memory allocation error when linkingcrosswalk








Hi Olivier,

Good to hear that you’re past that hurdle.

Can you confirm what hardware you’re building this for?

There was a similar issue reported on the tizen-dev mailing list earlier this 
month, see: https://lists.tizen.org/pipermail/dev/2015-January/005964.html. Is 
this consistent with what you are seeing?

Thanks,
Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Olivier Delbeke
Sent: Wednesday, January 28, 2015 5:24 PM
To: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: Re: [IVI] tizen-distro : memory allocation error when linkingcrosswalk


Dear all,

FYI, and as expected, the compilation of crosswalk succeeds when run on a 
64-bit OS (an not on a 32-bit OS). Thank you.

But now, I have some trouble to start it (the Modello image).
- the kernel starts
- systemd starts
- systemd fails to start "Avahi", "the av system" and  "Install Modello 
applications"
- the system remains in text mode, with many error messages

I guess that the "Failed to start the av system" means that the kernel is 
compiled without support for my graphics card or something like that. Right ?

Best regards,
[cid:image001.jpg@01D03BDA.D72DB2B0]



Olivier Delbeke Senior Software Engineer
olivier.delb...@awtce.be<mailto:olivier.delb...@awtce.be> / T. +32 2 389 25 53


 AWTC Europe S.A. - Avenue de l’Industrie, 19 - 1420 Braine-l’Alleud - Belgium 
- www.aweurope.eu<http://www.aweurope.eu/> - 
www.aisin-aw.co.jp<http://www.aisin-aw.co.jp/>
VAT : BE 0474.474.114 - RPM Nivelles



[Inactive hide details for Patrick Ohly ---01/21/2015 09:54:06 AM---Patrick 
Ohly ]Patrick Ohly ---01/21/2015 09:54:06 AM---Patrick 
Ohly mailto:patrick.o...@intel.com>>
Patrick Ohly mailto:patrick.o...@intel.com>>

01/21/2015 09:54 AM


To


Olivier Delbeke mailto:olivier.delb...@awtce.be>>


cc


"VanCutsem, Geoffroy" 
mailto:geoffroy.vancut...@intel.com>>, 
"ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>" 
mailto:ivi@lists.tizen.org>>


Subject


Re: [IVI] tizen-distro : memory allocation error when linkingcrosswalk










On Wed, 2015-01-21 at 08:18 +0100, Olivier Delbeke wrote:
> I get the same memory allocation error on another machine with 12 GB
> of RAM 

Re: [IVI] Video streaming in Crosswalk

[VanCutsem, Geoffroy]

Hi,

That link points at a a Native API which we don’t support in IVI. You will find 
all Web APIs supported in IVI documented here: 
https://developer.tizen.org/profiles/vehicle-infotainment/developing-tizen-ivi/web-api-references

You can also take a look at our Modello Multimedia player if you don’t want to 
start from scratch, although I don’t believe it supports RTSP specifically. The 
sources of the Modello Multimedia player are available here: 
https://review.tizen.org/git/?p=profile/ivi/Modello_Multimediaplayer.git;a=summary

Thanks,
Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of ?? ???
Sent: Thursday, January 29, 2015 2:37 PM
To: ivi@lists.tizen.org
Cc: You, Le
Subject: [IVI] Video streaming in Crosswalk

Hi. I make in Tizen IVI Crosswalk environment Mediaplayer application. My task 
is to play video in streaming format RTSP::// .
I am found this page  
https://developer.tizen.org/dev-guide/2.2.0/org.tizen.native.apireference/classTizen_1_1Media_1_1Player.html
  .
Could i use this API for my web application ? Application on Crosswalk
--
Best regads ,Руслан Кузьмин
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: [IVI] tizen-distro : memory allocation error when linkingcrosswalk

[VanCutsem, Geoffroy]

Hi Olivier,

Good to hear that you’re past that hurdle.

Can you confirm what hardware you’re building this for?

There was a similar issue reported on the tizen-dev mailing list earlier this 
month, see: https://lists.tizen.org/pipermail/dev/2015-January/005964.html. Is 
this consistent with what you are seeing?

Thanks,
Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Olivier Delbeke
Sent: Wednesday, January 28, 2015 5:24 PM
To: ivi@lists.tizen.org
Subject: Re: [IVI] tizen-distro : memory allocation error when linkingcrosswalk


Dear all,

FYI, and as expected, the compilation of crosswalk succeeds when run on a 
64-bit OS (an not on a 32-bit OS). Thank you.

But now, I have some trouble to start it (the Modello image).
- the kernel starts
- systemd starts
- systemd fails to start "Avahi", "the av system" and  "Install Modello 
applications"
- the system remains in text mode, with many error messages

I guess that the "Failed to start the av system" means that the kernel is 
compiled without support for my graphics card or something like that. Right ?

Best regards,
[cid:image001.jpg@01D03B29.2C428800]



Olivier Delbeke Senior Software Engineer
olivier.delb...@awtce.be<mailto:olivier.delb...@awtce.be> / T. +32 2 389 25 53

 AWTC Europe S.A. - Avenue de l’Industrie, 19 - 1420 Braine-l’Alleud - Belgium 
- www.aweurope.eu<http://www.aweurope.eu> - 
www.aisin-aw.co.jp<http://www.aisin-aw.co.jp>
VAT : BE 0474.474.114 - RPM Nivelles



[Inactive hide details for Patrick Ohly ---01/21/2015 09:54:06 AM---Patrick 
Ohly ]Patrick Ohly ---01/21/2015 09:54:06 AM---Patrick 
Ohly mailto:patrick.o...@intel.com>>
Patrick Ohly mailto:patrick.o...@intel.com>>

01/21/2015 09:54 AM


To


Olivier Delbeke mailto:olivier.delb...@awtce.be>>


cc


"VanCutsem, Geoffroy" 
mailto:geoffroy.vancut...@intel.com>>, 
"ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>" 
mailto:ivi@lists.tizen.org>>


Subject


Re: [IVI] tizen-distro : memory allocation error when linkingcrosswalk








On Wed, 2015-01-21 at 08:18 +0100, Olivier Delbeke wrote:
> I get the same memory allocation error on another machine with 12 GB
> of RAM and 9 GB of swap. Both machines are running a 32-bit Ubuntu
> 14.04. Maybe this is what causes the issue with the 64-bit build.

Quite likely. On a 32 bit host, one single process cannot mmap more than
4GB (actually, less in practice). That's probably the reason for the
"mmap: failed to allocate 1810592752 bytes for output file" error.

Why do you install 12GB of RAM in a machine running a 32 bit OS? I think
it does get used via tricks, but a 64 bit OS would be better.

--
Best Regards, Patrick Ohly

The content of this message is my personal opinion only and although
I am an employee of Intel, the statements I make here in no way
represent Intel's position on the issue, nor am I authorized to speak
on behalf of Intel on this matter.




This mail, and any attachments thereto, is intended only for use by the 
addressee(s) named herein and may contain legally privileged and/or 
confidential information. If you are not the intended recipient, please note 
that any review, dissemination, disclosure, alteration, printing, copying or 
transmission of this mail and/or any file transmitted with it, is strictly 
prohibited and may be unlawful. If you have received this mail by mistake, 
please immediately notify the sender as well as our mail administrator at 
postmas...@aweurope.be<mailto:postmas...@aweurope.be>, and permanently destroy 
the original as well as any copy thereof.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: [IVI] My daemon process will be killed in one minute

[VanCutsem, Geoffroy]

Can you provide a bit more details on your environment? What IVI image are you 
using? Do you have a log showing why/what/how your process was killed?

Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of ?
Sent: Wednesday, January 28, 2015 4:20 AM
To: ivi@lists.tizen.org
Subject: [IVI] My daemon process will be killed in one minute

I am using systemd to launch my daemon process, it can be work. But in about 1 
minute,my daemon process will be killed. I lanuch the process using "./",it can 
remain till the time I kill it. I don not know the reason.

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: [IVI] receiving signal very late from phoned

[VanCutsem, Geoffroy]

Hi Ray,

Were you able to determine if what is delayed is the message from oFono to 
phoned or from phoned to the Phone Web app?

Thanks,
Geoffroy


---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Ray·Bloodworth
Sent: Friday, January 23, 2015 7:20 AM
To: ivi@lists.tizen.org
Subject: [IVI] receiving signal very late from phoned

Hi, everyone

I'm testing phoned using test code "phoned/test/main.cpp".
   Platform: VTC1010
   
image:http://download.tizen.org/releases/milestone/tizen/ivi-3.0.m14.3/tizen-3.0.m14.3-ivi_20141028.3/

steps:
1. pair and connect mobile using bluetoothctl.
2. launch test program "phone" with app user in weston terminal.
3. enter "dial" command.

Then a phone call was made and first signal named "CallChanged" was 
received.
Then I hangup the call from mobile. After long time(about 1min) three 
signals named "CallChanged" were received together.

I checked log, phoned received ofono's signals "CallChanged" after a long 
time.

Also, I tested org.tizen.dialer, every thing is fine. There's no much delay 
about these signals...

Could anyone help me with this issue?

Thanks!

Ray·Bloodworth


___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: [IVI] tizen-distro : memory allocation error when linking crosswalk

[VanCutsem, Geoffroy]

Hi Olivier,

I really don’t think you need more than 16GB of RAM, I could compile Crosswalk 
on a much-lower spec system (4GB of RAM) myself and I was building for 
genericx86-64 too. I’m no expert in memory set-up but I was always advised to 
set-up a swap area of about the same size of the RAM of the system, your dev 
machine is rather unbalanced from that perspective, maybe an interesting 
experiment would be to turn swap off completely to see if it makes any 
difference?

Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Olivier Delbeke
Sent: Monday, January 19, 2015 12:10 PM
To: José Bollo
Cc: ivi@lists.tizen.org
Subject: Re: [IVI] tizen-distro : memory allocation error when linking crosswalk


Hi José,

Sorry for the missing information. I'm just trying for the default MACHINE : 
"genericx86-64".

Thank you and best regards,
[cid:image001.jpg@01D033E7.C6B866A0]



Olivier Delbeke Senior Software Engineer
olivier.delb...@awtce.be / T. +32 2 389 25 53

 AWTC Europe S.A. - Avenue de l’Industrie, 19 - 1420 Braine-l’Alleud - Belgium 
- www.aweurope.eu - 
www.aisin-aw.co.jp
VAT : BE 0474.474.114 - RPM Nivelles



[Inactive hide details for José Bollo ---01/19/2015 12:06:08 PM---José Bollo 
]José Bollo ---01/19/2015 12:06:08 PM---José 
Bollo mailto:jose.bo...@open.eurogiciel.org>>
José Bollo 
mailto:jose.bo...@open.eurogiciel.org>>

01/19/2015 12:06 PM


To


Olivier Delbeke mailto:olivier.delb...@awtce.be>>


cc


"ivi@lists.tizen.org" 
mailto:ivi@lists.tizen.org>>


Subject


Re: [IVI] tizen-distro : memory allocation error when linking crosswalk








Hello,

just a detail, what is your target arch?

Best regards
José Bollo

Le lundi 19 janvier 2015 à 11:40 +0100, Olivier Delbeke a écrit :
> Dear all,
>
> I'm trying to compile Tizen IVI with Yocto (bitbake), but I always get
> the same error "Cannot allocate memory" when it tries to link
> crosswalk. All the other packages compile fine. The full error message
> is "fatal error: xwalk: mmap: failed to allocate 1810592752 bytes for
> output file: Cannot allocate memory"
>
> I get this even on my biggest machine (16GB RAM + 4GB swap), running
> Ubuntu 14.04 and having 15 GB of free memory before starting the
> build. In addition, I set BB_NUMBER_THREADS = "1" and PARALLEL_MAKE =
> "-j1" in my local.conf, and I'm calling ninja with '-j1' in
> meta-tizen/meta-tizen-common-share/recipes-crosswalk/crosswalk/crosswalk.inc. 
> I also don't have blocking ulimits ("max memory size":"unlimited", "virtual 
> memory":"unlimited").
>
> Should my configuration be enough, or do I really need a machine with
> more than 16 GB of RAM ? Anything I should test/check ?  If my machine
> is too small, how many GB of RAM should I add ?
>
> As a test, I'd like to compile it without the debugging symbol. How
> can I do that with 'ninja' ?
>
> Thank you and best regards,
>
>
>
> Olivier Delbeke Senior
> Software Engineer
> olivier.delb...@awtce.be /
> T. +32 2 389 25 53
> ___
>  AWTC Europe S.A. - Avenue
> de l’Industrie, 19 - 1420
> Braine-l’Alleud - Belgium -
> www.aweurope.eu -
> www.aisin-aw.co.jp
> VAT : BE 0474.474.114 - RPM
> Nivelles
>
> This mail, and any attachments thereto, is intended only for use by
> the addressee(s) named herein and may contain legally privileged
> and/or confidential information. If you are not the intended
> recipient, please note that any review, dissemination, disclosure,
> alteration, printing, copying or transmission of this mail and/or any
> file transmitted with it, is strictly prohibited and may be unlawful.
> If you have received this mail by mistake, please immediately notify
> the sender as well as our mail administrator at
> postmas...@aweurope.be, and permanently 
> destroy the original as well
> as any copy thereof.
>
> ___
> IVI mailing list
> IVI@lists.tizen.org
> https://lists.tizen.org/listinfo/ivi



This mail, and any attachments thereto, is intended only for use by the 
addressee(s) named herein and may contain legally privileged and/or 
confidential information. If you are not the intended recipient, please note 
that any review, dissemination, disclosure, alteration, printing, copying or 
transmission of this mail and/or any file transmitted with it, is strictly 
prohibited and may be unlawful. If you have received this mail by mistake, 
please immediately notify the sender as well 

Re: [IVI] crosswalk-thirdparty fails to build in tizen-distro

[VanCutsem, Geoffroy]

Answering my own question... reducing the parallelism in conf/local.conf wasn't 
sufficient and I finally got over that hurdle by reducing the number of threads 
used by 'ninja'. It's by default hard-coded to 16 in crosswalk.inc and 
crosswalk-thirdparty.inc and I could finally compile this package after I had 
reduced this to 4 (I choose that number somewhat arbitrarily). Is there a way 
to change that to use a variable that would depend on the number of processors 
available on the machine (maybe similar to what's described in conf/local.conf, 
i.e. using ${@oe.utils.cpu.count()}?

Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09


> -Original Message-
> From: VanCutsem, Geoffroy
> Sent: Monday, January 12, 2015 4:39 PM
> To: ivi@lists.tizen.org; d...@lists.tizen.org
> Subject: RE: crosswalk-thirdparty fails to build in tizen-distro
> 
> With attachment this time...
> 
> > -Original Message-
> > From: VanCutsem, Geoffroy
> > Sent: Monday, January 12, 2015 4:38 PM
> > To: ivi@lists.tizen.org; d...@lists.tizen.org
> > Subject: crosswalk-thirdparty fails to build in tizen-distro
> >
> > Hi folks,
> >
> > I am facing a new issue building crosswalk-thirdparty using rev_0.9 of 
> > tizen-
> > distro on a Fedora 19 machine. I am trying to build the tizen-ivi-core-image
> > target.
> >
> > The error I got on the terminal window has been pasted below [1] and I am
> > also attached the related log file.
> >
> > Can you help me fix this?
> >
> > Thanks,
> > Geoffroy
> >
> > [1] Here is the error I got on the terminal
> > [gvancuts@localhost build]$ bitbake tizen-ivi-core-image
> > Loading cache: 100%
> > |#
> > ##
> > | ETA:  00:00:00
> > Loaded 2503 entries from dependency cache.
> > NOTE: Resolving any missing task queue dependencies
> > NOTE: preferred version 1.60 of elfutils not available (for item elfutils)
> > NOTE: versions of elfutils available: 0.148 0.158 0.160
> > NOTE: preferred version 1.60 of elfutils not available (for item elfutils)
> > NOTE: versions of elfutils available: 0.148 0.158 0.160
> > NOTE: preferred version 1.60 of elfutils not available (for item 
> > elfutils-dev)
> > NOTE: versions of elfutils available: 0.148 0.158 0.160
> >
> > Build Configuration:
> > BB_VERSION= "1.24.0"
> > BUILD_SYS = "x86_64-linux"
> > NATIVELSBSTRING   = "Fedora-19"
> > TARGET_SYS= "x86_64-oe-linux"
> > MACHINE   = "genericx86-64"
> > DISTRO= "tizen-ivi"
> > DISTRO_VERSION= "3.0"
> > TUNE_FEATURES = "m64 core2"
> > TARGET_FPU= ""
> > meta
> > meta-oe
> > meta-multimedia
> > meta-ruby
> > meta-systemd
> > meta-gnome
> > meta
> > meta-oe
> > meta-tizen-common-base
> > meta-tizen-common-share
> > meta-tizen-common-devtools
> > meta-tizen-common-demo
> > meta-tizen-ivi= "master:4d13fc323cb96e3ba36d7acdb6f8ab034add91d0"
> >
> > NOTE: Preparing runqueue
> > NOTE: Executing SetScene Tasks
> > NOTE: Executing RunQueue Tasks
> > ERROR: Function failed: do_compile (log file is located at
> > /home/gvancuts/tizen-distro/build/tmp-glibc/work/genericx86_64-oe-
> > linux/crosswalk-thirdparty/11.39.256.0-r0/temp/log.do_compile.9877)
> > ERROR: Logfile of failure stored in: /home/gvancuts/tizen-distro/build/tmp-
> > glibc/work/genericx86_64-oe-linux/crosswalk-thirdparty/11.39.256.0-
> > r0/temp/log.do_compile.9877
> > Log data follows:
> > | DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 
> > 'bit-64',
> > 'x86_64-linux', 'common']
> > | DEBUG: Executing shell function do_compile
> > | Updating projects from gyp files...
> > | ninja: Entering directory `src/out/Release'
> > | [1/2817] CXX obj/content/utility/content_utility.utility_main.o
> > | [2/2817] CXX
> > obj/content/public/utility/content_utility.content_utility_client.o
> > | [3/2817] CXX obj/content/public/utility/content_utility.utility_thread.o
> > | [4/2817] STAMP
> > obj/gpu/command_buffer_service.actions_depends.stamp
> > | [5/2817] STAMP
> > obj/gpu/command_buffer_

Re: [IVI] [Dev] Tizen-Distro the Tizen build with Yocto Project is available

[VanCutsem, Geoffroy]

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09


> -Original Message-
> From: Patrick Ohly [mailto:patrick.o...@intel.com]
> Sent: Monday, January 12, 2015 10:14 PM
> To: VanCutsem, Geoffroy
> Cc: Kévin THIERRY; d...@lists.tizen.org; ivi@lists.tizen.org
> Subject: Re: [IVI] [Dev] Tizen-Distro the Tizen build with Yocto Project is
> available
> 
> On Mon, 2015-01-12 at 15:34 +, VanCutsem, Geoffroy wrote:
> > Hi Patrick,
> >
> > > -Original Message-
> > > From: Patrick Ohly [mailto:patrick.o...@intel.com]
> > > Sent: Monday, January 12, 2015 8:59 AM
> > > To: VanCutsem, Geoffroy
> > > Cc: Kévin THIERRY; d...@lists.tizen.org; ivi@lists.tizen.org
> > > Subject: Re: [IVI] [Dev] Tizen-Distro the Tizen build with Yocto Project 
> > > is
> > > available
> > >
> > > On Fri, 2015-01-09 at 10:18 +, VanCutsem, Geoffroy wrote:
> > > > Hi Kevin,
> > > >
> > > > I got past this error by installing pcre-devel on my Fedora dev
> > > > machine (sudo yum install pcre-devel). Swig was then successfully
> > > > compiled.
> > >
> > > Was that swig-native or swig for the target architecture?
> > I don't know, how can I find out?
> 
> The name of all native tools end with -native. In this case it was the
> swig for the target that failed.
Easy enough, I'll remember that :-)

> 
> >  One might get
> > > away with linking the native swig against the native pcre-devel, but
> > > doing the same for the target is almost certainly wrong.
> > >
> > > meta-oe/recipes-devtools/swig/swig.inc declares the dependency on
> > > libpcre. A log of the actual build failure would be useful to determine
> > > why it was not found.
> > The log (do_configure) was attached to my previous mail, here it is again.
> 
> My bad. Somehow I managed to overlook both the attachment and your
> comment about it.
No problem at all.

> 
> Unfortunately the log doesn't show much about the state of the sysroot
> at the time of the failure. But I was able to reproduce it:
> libpcre-devel in Yocto installs only the .pc file, whereas swig is
> looking for the older pcre-config. There is a patch replacing that with
> pkg-config, but the swig recipe fails to re-generate configure after
> patching configure.ac.
> 
> Looks like an upsteam meta-oe bug. I'll check in more detail tomorrow.
Thanks!

Geoffroy
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

[IVI] crosswalk-thirdparty fails to build in tizen-distro

[VanCutsem, Geoffroy]

Hi folks,

I am facing a new issue building crosswalk-thirdparty using rev_0.9 of 
tizen-distro on a Fedora 19 machine. I am trying to build the 
tizen-ivi-core-image target.

The error I got on the terminal window has been pasted below [1] and I am also 
attached the related log file.

Can you help me fix this?

Thanks,
Geoffroy

[1] Here is the error I got on the terminal
[gvancuts@localhost build]$ bitbake tizen-ivi-core-image
Loading cache: 100% 
|###|
 ETA:  00:00:00
Loaded 2503 entries from dependency cache.
NOTE: Resolving any missing task queue dependencies
NOTE: preferred version 1.60 of elfutils not available (for item elfutils)
NOTE: versions of elfutils available: 0.148 0.158 0.160
NOTE: preferred version 1.60 of elfutils not available (for item elfutils)
NOTE: versions of elfutils available: 0.148 0.158 0.160
NOTE: preferred version 1.60 of elfutils not available (for item elfutils-dev)
NOTE: versions of elfutils available: 0.148 0.158 0.160

Build Configuration:
BB_VERSION= "1.24.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING   = "Fedora-19"
TARGET_SYS= "x86_64-oe-linux"
MACHINE   = "genericx86-64"
DISTRO= "tizen-ivi"
DISTRO_VERSION= "3.0"
TUNE_FEATURES = "m64 core2"
TARGET_FPU= ""
meta  
meta-oe   
meta-multimedia   
meta-ruby 
meta-systemd  
meta-gnome
meta  
meta-oe   
meta-tizen-common-base 
meta-tizen-common-share 
meta-tizen-common-devtools 
meta-tizen-common-demo 
meta-tizen-ivi= "master:4d13fc323cb96e3ba36d7acdb6f8ab034add91d0"

NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Function failed: do_compile (log file is located at 
/home/gvancuts/tizen-distro/build/tmp-glibc/work/genericx86_64-oe-linux/crosswalk-thirdparty/11.39.256.0-r0/temp/log.do_compile.9877)
ERROR: Logfile of failure stored in: 
/home/gvancuts/tizen-distro/build/tmp-glibc/work/genericx86_64-oe-linux/crosswalk-thirdparty/11.39.256.0-r0/temp/log.do_compile.9877
Log data follows:
| DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 
'x86_64-linux', 'common']
| DEBUG: Executing shell function do_compile
| Updating projects from gyp files...
| ninja: Entering directory `src/out/Release'
| [1/2817] CXX obj/content/utility/content_utility.utility_main.o
| [2/2817] CXX 
obj/content/public/utility/content_utility.content_utility_client.o
| [3/2817] CXX obj/content/public/utility/content_utility.utility_thread.o
| [4/2817] STAMP obj/gpu/command_buffer_service.actions_depends.stamp
| [5/2817] STAMP obj/gpu/command_buffer_service.compile_depends.stamp
| [6/2817] CXX 
obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableLengthPoint3D.o
| [7/2817] CXX 
obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableLengthSize.o
| [8/2817] CXX 
obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableRepeatable.o
| [9/2817] CXX 
obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableSVGLength.o
| [10/2817] CXX 
obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableSVGPaint.o
| [11/2817] CXX 
obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableShadow.o
| [12/2817] CXX 
obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableShapeValue.o
| [13/2817] CXX 
obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableStrokeDasharrayList.o
| [14/2817] CXX 
obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableTransform.o
| [15/2817] CXX 
obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableValue.o
| [16/2817] CXX 
obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableValueKeyframe.o
| [17/2817] CXX 
obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableVisibility.o
| [18/2817] CXX 
obj/gpu/command_buffer/service/command_buffer_service.gpu_scheduler.o
| [19/2817] CXX 
obj/gpu/command_buffer/service/command_buffer_service.gpu_state_tracer.o
| [20/2817] CXX 
obj/gpu/command_buffer/service/command_buffer_service.gpu_switches.o
| [21/2817] CXX 
obj/gpu/command_buffer/service/command_buffer_service.id_manager.o
| [22/2817] CXX 
obj/gpu/command_buffer/service/command_buffer_service.image_manager.o
| [23/2817] CXX 
obj/gpu/command_buffer/service/command_buffer_service.in_process_command_buffer.o
| [24/2817] CXX obj/gpu/command_buffer/service/command_buffer_service.logger.o
| [25/2817] CXX 
obj/gpu/command_buffer/service/command_buffer_service.mailbox_manager.o
| [26/2817] CXX 
obj/gpu/command_buffer/service/command_buffer_service.mailbox_synchronizer.o
| [27/2817] CXX 
obj/gpu/command_

Re: [IVI] [Dev] Tizen-Distro the Tizen build with Yocto Project is available

[VanCutsem, Geoffroy]

Hi Patrick,

> -Original Message-
> From: Patrick Ohly [mailto:patrick.o...@intel.com]
> Sent: Monday, January 12, 2015 8:59 AM
> To: VanCutsem, Geoffroy
> Cc: Kévin THIERRY; d...@lists.tizen.org; ivi@lists.tizen.org
> Subject: Re: [IVI] [Dev] Tizen-Distro the Tizen build with Yocto Project is
> available
> 
> On Fri, 2015-01-09 at 10:18 +, VanCutsem, Geoffroy wrote:
> > Hi Kevin,
> >
> > I got past this error by installing pcre-devel on my Fedora dev
> > machine (sudo yum install pcre-devel). Swig was then successfully
> > compiled.
> 
> Was that swig-native or swig for the target architecture?
I don't know, how can I find out?

 One might get
> away with linking the native swig against the native pcre-devel, but
> doing the same for the target is almost certainly wrong.
> 
> meta-oe/recipes-devtools/swig/swig.inc declares the dependency on
> libpcre. A log of the actual build failure would be useful to determine
> why it was not found.
The log (do_configure) was attached to my previous mail, here it is again.

HTH,
Geoffroy 



log.do_configure.4259
Description: log.do_configure.4259
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: [IVI] [Dev] Tizen-Distro the Tizen build with Yocto Project is available

[VanCutsem, Geoffroy]

Hi Kevin,

I got past this error by installing pcre-devel on my Fedora dev machine (sudo 
yum install pcre-devel). Swig was then successfully compiled. The image build 
is still ongoing now and I will let you know if I hit any other issue.

You'll find the log file attached anyway in case you want to take a look at it.

Cheers,
Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09


> -Original Message-
> From: Kévin THIERRY [mailto:kevin.thie...@open.eurogiciel.org]
> Sent: Friday, January 09, 2015 9:08 AM
> To: VanCutsem, Geoffroy
> Cc: Jeremiah Foster; ronan; d...@lists.tizen.org; ivi@lists.tizen.org
> Subject: Re: [Dev] [IVI] Tizen-Distro the Tizen build with Yocto Project is
> available
> 
> Hi Geoffroy,
> 
> Can you send us the logs regarding swig build failure ?
> 
> Thanks,
> Kevin
> 
> On 01/09/2015 12:42 AM, VanCutsem, Geoffroy wrote:
> >
> > Hi Jeremiah,
> >
> > There is a 'tizen-ivi-init-build-env' script available too in
> > tizen-distro [1]. I gave this a shot [2] earlier today but hit an
> > issue building 'swig'.
> >
> > [1]
> > https://review.tizen.org/git/?p=scm/bb/tizen-distro.git;a=blob;f=tizen-ivi-
> init-build-
> env;h=236f2592108d6e8c6a1163e9c4a509757fc68559;hb=refs/heads/tizen
> >
> > [2] On my Fedora 19 dev machine:
> >
> > #git clone tizen:scm/bb/tizen-distro
> > #cd tizen-distro
> > #source ./tizen-ivi-init-build-env
> > #bitbake tizen-ivi-core-image
> >
> > Other targets are available too.
> >
> > Geofroy
> >
> > ---
> >
> > Intel Corporation NV/SA
> >
> > Kings Square, Veldkant 31
> >
> > 2550 Kontich
> >
> > RPM (Bruxelles) 0415.497.718.
> >
> > Citibank, Brussels, account 570/1031255/09
> >
> > *From:*IVI [mailto:ivi-boun...@lists.tizen.org] *On Behalf Of
> > *Jeremiah Foster
> > *Sent:* Thursday, January 08, 2015 7:37 PM
> > *To:* ronan
> > *Cc:* d...@lists.tizen.org; ivi@lists.tizen.org
> > *Subject:* Re: [IVI] Tizen-Distro the Tizen build with Yocto Project
> > is available
> >
> > On Thu, Jan 8, 2015 at 4:57 PM, ronan
> >  > <mailto:ronan.lemart...@open.eurogiciel.org>> wrote:
> >
> > Hi all,
> > We are glad to announce the availability of Tizen-Distro.
> >
> >  - https://wiki.tizen.org/wiki/Build_Tizen_with_Yocto_Project
> >
> > Tizen-distro provides all the meta-data needed to build Tizen Common
> > and Tizen IVI (Modello) images with yocto.
> >
> > https://wiki.tizen.org/wiki/Tizen-distro_on_Yocto_Project
> >
> > We strongly recommend to follow the wiki :) , but thanks to Yocto we
> > can build  a full Tizen common image from scratch with only 4 command
> > lines:
> >
> > #git clone git://review.tizen.org/scm/bb/tizen-distro
> > <http://review.tizen.org/scm/bb/tizen-distro>
> > #cd tizen-distro build-common
> > #source ./tizen-common-init-build-env
> > #bitbake tizen-common-core-image-crosswalk-dev
> >
> > We are looking forward to enjoying your feedback experience on the
> > wiki Tizen
> >
> > I look forward to trying this out, it looks very interesting.
> > Congratulations on all the hard work!
> >
> > I wonder if there are specific builds for things like Tizen IVI?
> >
> > Cheers,
> >
> > Jeremiah
> >
> >
> > https://wiki.tizen.org/wiki/Tizen_on_Yocto_Project
> >
> > Ronan Le Martret
> > ___
> > IVI mailing list
> > IVI@lists.tizen.org <mailto:IVI@lists.tizen.org>
> > https://lists.tizen.org/listinfo/ivi
> >
> >
> >
> > --
> >
> > Jeremiah C. Foster
> >
> > GENIVI COMMUNITY MANAGER
> >
> > Pelagicore AB
> >
> > Ekelundsgatan 4, 6tr, SE-411 18
> > Gothenburg, Sweden
> >
> > M: +46 (0)73 093 0506
> >
> > jeremiah.fos...@pelagicore.com
> <mailto:jeremiah.fos...@pelagicore.com>
> >
> >
> >
> > ___
> > Dev mailing list
> > d...@lists.tizen.org
> > https://lists.tizen.org/listinfo/dev



log.do_configure.4259
Description: log.do_configure.4259
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: [IVI] Tizen-Distro the Tizen build with Yocto Project is available

[VanCutsem, Geoffroy]

Hi Jeremiah,

There is a ‘tizen-ivi-init-build-env’ script available too in tizen-distro [1]. 
I gave this a shot [2] earlier today but hit an issue building ‘swig’.

[1] 
https://review.tizen.org/git/?p=scm/bb/tizen-distro.git;a=blob;f=tizen-ivi-init-build-env;h=236f2592108d6e8c6a1163e9c4a509757fc68559;hb=refs/heads/tizen
[2] On my Fedora 19 dev machine:
#git clone tizen:scm/bb/tizen-distro
#cd tizen-distro
#source ./tizen-ivi-init-build-env
#bitbake tizen-ivi-core-image
Other targets are available too.

Geofroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Jeremiah Foster
Sent: Thursday, January 08, 2015 7:37 PM
To: ronan
Cc: d...@lists.tizen.org; ivi@lists.tizen.org
Subject: Re: [IVI] Tizen-Distro the Tizen build with Yocto Project is available



On Thu, Jan 8, 2015 at 4:57 PM, ronan 
mailto:ronan.lemart...@open.eurogiciel.org>>
 wrote:
Hi all,
We are glad to announce the availability of Tizen-Distro.

 - https://wiki.tizen.org/wiki/Build_Tizen_with_Yocto_Project

Tizen-distro provides all the meta-data needed to build Tizen Common and Tizen 
IVI (Modello) images with yocto.

https://wiki.tizen.org/wiki/Tizen-distro_on_Yocto_Project

We strongly recommend to follow the wiki :) , but thanks to Yocto we can build  
a full Tizen common image from scratch with only 4 command lines:

#git clone 
git://review.tizen.org/scm/bb/tizen-distro
#cd tizen-distro build-common
#source ./tizen-common-init-build-env
#bitbake tizen-common-core-image-crosswalk-dev

We are looking forward to enjoying your feedback experience on the wiki Tizen

I look forward to trying this out, it looks very interesting. Congratulations 
on all the hard work!

I wonder if there are specific builds for things like Tizen IVI?

Cheers,

Jeremiah


https://wiki.tizen.org/wiki/Tizen_on_Yocto_Project

Ronan Le Martret
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi



--
Jeremiah C. Foster
GENIVI COMMUNITY MANAGER

Pelagicore AB
Ekelundsgatan 4, 6tr, SE-411 18
Gothenburg, Sweden
M: +46 (0)73 093 0506
jeremiah.fos...@pelagicore.com
[cid:image001.png@01D02BA5.24F50520]
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: [IVI] Trying to install Tizen on VMWare

[VanCutsem, Geoffroy]

Hi Rodney,

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Rodney Nunya
Sent: Tuesday, December 30, 2014 12:39 AM
To: Ray·Bloodworth
Cc: ivi
Subject: Re: [IVI] Trying to install Tizen on VMWare


Trying to follow some of the directions on the wiki to get a web application 
running but I think I need to expand the screen because it is pretty small on 
my screen. I believe it is only 800x600. I tried to run the ICO home screen and 
it does come up but is unusable.  I tried to follow the directions to make a 
different screen but not sure what I did wrong.

I copied and pasted the following lines to the end of the 
/etc/xdg/weston/weston.ini file as they are listed here:

[output]

name=UNKNOWN1

mode=1280x720

Then rebooted and nothing different happened.
I didn't try entering this line which is also mentioned but curious if I am 
missing something:

[output]

name=UNKNOWN1

mode=77.59 720 768 848 976 1280 1281 1284 1325 -hsync +vsync

Would I use one or both lines?



Only the latter one will work in VMware (at least that’s the case in all 
configs I’ve tried). Both lines are meant to achieve the same results by 
setting the size of your virtual screen to a 720p screen in portrait mode. The 
catch is that the first entry here above will only work if there is a 1280x720 
mode advertised by your (here virtual) monitor and that’s not the case in 
VMware. The second entry gives a complete modeline instead which allows to work 
around that issue.

I am a relative newbie to this stuff. I would consider myself a beginner level 
Linux person but I am very
familiar with with. I have been a PC person for the most part for past 20+ 
years. I do have experience
programming in many languages so I am no newbie to that stuff. I just need a 
little help getting this up and
running so I understand what I am doing.

Also, if the screen is NOT "UNKNOWN1" what command can I use to tell what the 
current screen is?

The output name is always UNKNOWN1 in VMware but it will be different on other 
systems (either physical or virtual). To find out what output is detected on 
your system, you can take a look at the weston logs (they are most easily 
accessible by logging in as 'root' and using ‘journalctl –b’ to view all system 
logs (for that boot).


Thanks for your help!

HTH… and Happy New Year!



Geoffroy

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: [IVI] Trying to install Tizen on VMWare

[VanCutsem, Geoffroy]

Correct, Modello has been designed for a 1280x720 screen in portrait mode.

Geoffroy

> -Original Message-
> From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Rees, Kevron
> Sent: Monday, January 05, 2015 6:45 PM
> To: Jones, Brian J
> Cc: Rodney Nunya; ivi; Ray·Bloodworth
> Subject: Re: [IVI] Trying to install Tizen on VMWare
> 
> IIRC, Modello was designed for 720p.
> 
> On Mon, Jan 5, 2015 at 8:49 AM, Jones, Brian J 
> wrote:
> > You can change the resolution in your weston.ini file. However, keep in
> mind
> > that Modello’s resolution is locked.  So changing the resolution will only
> > affect the size of your desktop area.
> >
> >
> >
> > From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Rodney Nunya
> > Sent: Monday, December 29, 2014 4:16 PM
> > To: Ray·Bloodworth
> > Cc: ivi
> > Subject: Re: [IVI] Trying to install Tizen on VMWare
> >
> >
> >
> > Sorry to keep bugging but I was able to get it up and running. I have
> > modello running on it but would like to make the screen bigger.
> >
> > Wish there was a better way to look at what has been done instead of
> trying
> > to make sense of what I have here.
> >
> > I am on a 1980x1020 screen and go to full screen which should make the
> whole
> > screen available to tizen.
> >
> > I do seem to be able to change the screen somewhat but not getting a
> > reasonable screen size. What modes are supported by default?
> >
> > Thanks again!
> >
> > Rodney
> >
> >
> > ___
> > IVI mailing list
> > IVI@lists.tizen.org
> > https://lists.tizen.org/listinfo/ivi
> >
> ___
> IVI mailing list
> IVI@lists.tizen.org
> https://lists.tizen.org/listinfo/ivi
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: [IVI] About playbin route setting

[VanCutsem, Geoffroy]

I'm not sure I fully understand what you'd like to accomplish but using the 
command-line as listed below makes you access the ALSA device directly, 
completely by-passing PulseAudio. If you ever want to do some more advanced 
mixing/routing and even benefit from the Murphy audio policy capabilities, this 
does not look like a wise thing to do.

If you really want to specifically indicate the device that you want to use as 
a sink, then I'd suggest you use Gstreamer pulsesink plugin and specify the 
PulseAudio device that corresponds to the audio card you want to use. Jaska 
gave a good example in his response on a different thread: 
https://lists.tizen.org/pipermail/ivi/2014-December/003782.html

HTH,
Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09


> -Original Message-
> From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Kaskinen, Tanu
> Sent: Sunday, December 21, 2014 4:22 PM
> To: 15045696...@163.com
> Cc: ivi@lists.tizen.org
> Subject: Re: [IVI] About playbin route setting
> 
> On Sun, 2014-12-21 at 21:30 +0800, Zoe James wrote:
> >
> >
> > With the following line command ,the mp3 output in QT media player.
> > gst-launch-1.0 playbin uri=file:///test.mp3 audio-sink="alsasink
> > device=hw:0,0"
> >
> >
> > Is there Gstreamer API can realise "alsasink device=hw:0,0"(route
> > settings).
> > I want set the route with code not command.
> >
> > Thanks advance!
> 
> Have you tried reading the GStreamer documentation? I'm not familiar
> with the GStreamer API, so I can't give exact instructions, but setting
> up a playback pipeline is very basic GStreamer functionality, so I'm
> sure there's documentation for that at
> http://gstreamer.freedesktop.org/documentation/
> 
> --
> Tanu
> 
> ___
> IVI mailing list
> IVI@lists.tizen.org
> https://lists.tizen.org/listinfo/ivi
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: [IVI] build murphy project error

[VanCutsem, Geoffroy]

I guess the question is what are the modifications that have not been commited 
yet and that are causing the compile errors? What does 'git diff' return?

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of bray
Sent: Thursday, December 11, 2014 6:50 AM
To: Litkey, Krisztian
Cc: ivi@lists.tizen.org
Subject: Re: [IVI] build murphy project error

Hi,
Thank you for your reply.

I build the project success without --include-all.
using [ --include-all ] to gsb project,because I want to modifi it latter.

Yours
bray


At 2014-12-05 21:53:33, "Litkey, Krisztian" 
mailto:krisztian.lit...@intel.com>> wrote:

>On Fri, 2014-12-05 at 20:29 +0800, bray wrote:

>

>> Hi everyone:

>

>  Hi,

>

>>

>> I try to build the murphy project by using gbs. the murphy project

>> come from tizen-3.0.m14.3-ivi_20141028.3( profile\ivi\murphy ).

>> run command:

>> gbs -c mygbs.conf build -A armv7l --include-all

>>

>

>Interesting, I just tried to gbs-compile for ARM our latest release and

>the one you are trying to build here. Both compile without problems.

>

>> I did not make any changes to the project but it fails to build.

>

>Can I ask why do you pass --include-all to gbs if you have not modified

>anything ? I would try compiling without --include-all.

>

>If that does not help, could you try to compile it with non-silenced

>$(MAKE) and send us the logs. The easiest way to do this is to rerun

>your gbs command with --define "_with_debug 1" appended. So just run

>

>gbs -c mygbs.conf build -A armv7l --define "_with_debug 1"

>

>and send me the resulting output.

>

>>

>> Can anyone help on this errors ?

>> thanks

>>

>> Yours

>> bray

>>

>

>  Cheers,

>Krisztian

>

>>

>> ___

>> IVI mailing list

>> IVI@lists.tizen.org

>> https://lists.tizen.org/listinfo/ivi

>

>-

>Intel Finland Oy

>Registered Address: PL 281, 00181 Helsinki

>Business Identity Code: 0357606 - 4

>Domiciled in Helsinki

>

>This e-mail and any attachments may contain confidential material for

>the sole use of the intended recipient(s). Any review or distribution

>by others is strictly prohibited. If you are not the intended

>recipient, please contact the sender and delete all copies.

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: [IVI] [Dev] New 'Introduction to Tizen IVI' webinar available

[VanCutsem, Geoffroy]

Thanks Leon! Let me check if we can make this more visible directly on 
youtube.com too. I’ll keep you posted.

Cheers,
Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: Ashiq Nazir [mailto:a...@tizenexperts.com]
Sent: Tuesday, December 02, 2014 8:09 AM
To: Leon Anavi
Cc: VanCutsem, Geoffroy; ivi@lists.tizen.org
Subject: Re: [Dev] New 'Introduction to Tizen IVI' webinar available


Hi Leon / Geoffroy,

Great idea, I'll get a post up today.

Thanks

Ash,
Ashiq Nazir

Sent using 
CloudMagic<https://cloudmagic.com/k/d/mailapp?ct=pa&cv=5.1.11.3&pv=4.4.4>

On Mon, Dec 01, 2014 at 10:05 PM, Leon Anavi 
mailto:l...@anavi.org>> wrote:


Hi Geoffroy, Ash,

> A new webinar introducing Tizen IVI has just been posted here:
> https://developer.tizen.org/documentation/articles/introduction-tizen-ivi.
> Feel free to spread the word to those who would benefit from it.

Geoffroy, well done, the webinar is really nice. I shared it at twitter
even twice :)

The video is unlisted at YouTube, obviously because of the contact
information form on tizen.org. So may be it is a bit hard for someone
who doesn't know about the existence of the webinar to find it.

Ash, is it possible for you to post an article about the Tizen IVI
webinar on Tizen Experts?

Thanks,
Leon

--
http://anavi.org/
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

[IVI] New 'Introduction to Tizen IVI' webinar available

[VanCutsem, Geoffroy]

Hi folks,

A new webinar introducing Tizen IVI has just been posted here: 
https://developer.tizen.org/documentation/articles/introduction-tizen-ivi. Feel 
free to spread the word to those who would benefit from it.

Enjoy!
Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09


___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: [IVI] [Tizen Application-dev] how to back to previous page

[VanCutsem, Geoffroy]

Hi Bray,

There is no such mechanism in Tizen that I'm aware of. That's due to the fact 
there is no restrictions on what the UI should look like (as such it's up to 
the UI designer to decide whether having a back button, hard or soft, is even 
desirable).

Thanks,
Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: bray [mailto:bray_w...@163.com]
Sent: Thursday, November 27, 2014 12:31 PM
To: VanCutsem, Geoffroy
Cc: ivi@lists.tizen.org; application-...@lists.tizen.org
Subject: Re:RE: [Tizen Application-dev] how to back to previous page

Hi,

Thank you for your reply.

In andriod,the system back key pressed,the running app will back to previous 
page. (app does not do any operation for the back )
Does TIZEN IVI have the same mechanism?

Yours
bray




At 2014-11-27 18:30:47, "VanCutsem, Geoffroy" 
mailto:geoffroy.vancut...@intel.com>> wrote:

Hi Bray,

There is no official native API in Tizen 3.0. It's possible of course to use 
the core APIs of the various middleware components but I would advice to 
architect it carefully so as to work nicely within the Tizen architecture (esp. 
regarding multi-seat/multi-user and the security framework).

Having said that, if you can give some more details on what APIs you intend to 
use there may be folks on this mailing list that could help with your question 
regarding a 'back' button.

Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: Application-dev 
[mailto:application-dev-boun...@lists.tizen.org<mailto:application-dev-boun...@lists.tizen.org>]
 On Behalf Of bray
Sent: Thursday, November 27, 2014 10:09 AM
To: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>; 
application-...@lists.tizen.org<mailto:application-...@lists.tizen.org>
Subject: [Tizen Application-dev] how to back to previous page

Hi everyone:

I'm developing a native app on Tizen IVI 3.0.

When I press the back button,I want to back to previous page.
Is there any API I can use or I must memory the flow history?
any examples can be  send to me.

thanks!

BR
bray


___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: [IVI] [Tizen Application-dev] how to back to previous page

[VanCutsem, Geoffroy]

Hi Bray,

There is no official native API in Tizen 3.0. It's possible of course to use 
the core APIs of the various middleware components but I would advice to 
architect it carefully so as to work nicely within the Tizen architecture (esp. 
regarding multi-seat/multi-user and the security framework).

Having said that, if you can give some more details on what APIs you intend to 
use there may be folks on this mailing list that could help with your question 
regarding a 'back' button.

Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: Application-dev [mailto:application-dev-boun...@lists.tizen.org] On 
Behalf Of bray
Sent: Thursday, November 27, 2014 10:09 AM
To: ivi@lists.tizen.org; application-...@lists.tizen.org
Subject: [Tizen Application-dev] how to back to previous page

Hi everyone:

I'm developing a native app on Tizen IVI 3.0.

When I press the back button,I want to back to previous page.
Is there any API I can use or I must memory the flow history?
any examples can be  send to me.

thanks!

BR
bray

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Running EFI Tizen images under VMware (both 32-bit and 64-bit)

[VanCutsem, Geoffroy]

Hi folks,

For those interested, it is possible with minimal effort to also run EFI Tizen 
IVI (both 32-bit and 64-bit) images under VMware (instead of the MBR images). I 
have tested this so far only on VMware Player 6.0.4 running on Fedora 19 
(64-bit version) but other combinations may work too. This is particularly 
relevant if you want to take the 64-bit builds of Tizen IVI for a test drive as 
there is no MBR version of those published at this stage. So here is how you 
can do this:
- For 32-bit images (such as [1]): add the following line to your vmx file: 
firmware = "efi"
- For 64-bit images (such as [2]):
- Select 'Fedora 64-bit' as the OS when creating the new Virtual Machine
- add the following line to your vmx file: firmware = "efi"
Note: the reason you need to select 'Fedora 64-bit' for 64-bit images is 
because this what triggers the UEFI firmware from VMware to search for 
respectively a 32-bit or 64-bit bootloader.
Note2: I believe you *must* be running a 64-bit host OS in order to run 64-bit 
Guest OS on VMware.

I have updated the Tizen IVI 3.0 in VMware [3] wiki page with the relevant info.

Let me know if you run into any issue and feel free to report if other 
combinations work too!

Cheers,
Geoffroy

[1] 
http://download.tizen.org/releases/milestone/tizen/ivi-3.0.m14.3/tizen-3.0.m14.3-ivi_20141028.3/images/atom/ivi-efi-i586/
[2] 
http://download.tizen.org/releases/milestone/tizen/ivi-3.0.m14.3/tizen-3.0.m14.3-ivi_20141028.3/images/atom64/ivi-efi-x86_64/
[3] https://wiki.tizen.org/wiki/IVI/IVI_3.0_VMware


---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09


___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Widget does not install: signature verify error

[VanCutsem, Geoffroy]

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Jay D Bhatt
Sent: Tuesday, November 11, 2014 7:27 AM
To: ivi@lists.tizen.org
Subject: Widget does not install: signature verify error

Hi,

I am working on Tizen IVI 3.0-M2-March2014 Release.

I have created example.wgt on TIZEN SDK version 2.2.80, and a rpm which 
installs the example.wgt when systemd starts up.

So, when the desktop shell comes up, when I execute command: wrt-launcher -l , 
I get the list of installed widgets but the example.wgt is not in the list, 
while GhostCluster widget is installed successfully. Ideally example.wgt should 
also install successfully.

I try to look at the journalctl log and I find the signature verify error while 
installation of example.wgt. Similar error doesn't happen with pre-installed 
widgets like GhostCluster or MediaPlayer,etc.

Can anybody provide help on this issue? What is solution/workaround for this 
issue?
Can you try to modify the config.xml by changing the default required_version 
field to required_version="2.1"

Here is a wiki page that has more details on this: 
https://wiki.tizen.org/wiki/How_to_use_SDK_to_create_web_app_for_Tizen_IVI

Geoffroy

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Video playback - 'intel_do_flush_locked failed. No space left on the device'

[VanCutsem, Geoffroy]

Hi Sathish,

I don't have a good idea yet as to what's causing this issue. I've searched a 
bit more for such error and found a number of reports dating back to 2012 
affecting various distros (Ubuntu, Fedora, Debian). In most reports that I 
glanced through, all systems were based on the 945GM graphics chipset. You 
mentionned in your original mail that you boot Tizen on a laptop, could you 
give us the exact spec (+ 'lspci').

Could you do a couple of additional experiments too:

-  Try a different hardware, preferably a Bay Trail system (such as 
VTC-1010, NUC DE3815TYKHE, MinnowBoard MAX)?

-  Try the latest milestone [1] image to see if the same error occurs

Thanks,
Geoffroy

[1] https://wiki.tizen.org/wiki/IVI/Tizen-IVI_3.0-M3-Oct2014

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: Sathishkumar Sivagurunathan [mailto:sathishkumar.sivagurunat...@igate.com]
Sent: Wednesday, October 29, 2014 2:52 PM
To: VanCutsem, Geoffroy; 'ivi@lists.tizen.org'
Subject: RE: Video playback - 'intel_do_flush_locked failed. No space left on 
the device'

Thanks Geoffroy,

  Tried to take the lead with your help. I tried df and du.. But both at 
startup and when the crash happens, the values remain same..

I tried to take the log using free command.

The command I used is "free -m"

The intial value at startup is

 total   used   free sharedbuffers cached
Mem:  3928419   3508100  7220
-/+ buffers/cache:191   3736
Swap:0  0  0

When I system hangs, I get this

 total   used   free sharedbuffers cached
Mem:  3928   3679248   3466  0   3487
-/+ buffers/cache:191   3736
Swap:0  0  0

>From what I understand, free memory comes from 3508 MB to 248 MB in just 7 
>mins in my case..

Is my understanding correct ?? And Can you help me with this to find what is 
causing the memory consumption??

Thanks,
Sathish

From: VanCutsem, Geoffroy [mailto:geoffroy.vancut...@intel.com]
Sent: Friday, October 24, 2014 6:56 PM
To: Sathishkumar Sivagurunathan; 'ivi@lists.tizen.org'
Subject: RE: Video playback - 'intel_do_flush_locked failed. No space left on 
the device'

FYI, this may also be relevant to you: 
https://bugs.tizen.org/jira/browse/TC-1628

Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: VanCutsem, Geoffroy
Sent: Thursday, October 23, 2014 4:54 PM
To: Sathishkumar Sivagurunathan; ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: RE: Video playback - 'intel_do_flush_locked failed. No space left on 
the device'

A shot in the dark here: that seems like the typical message that arrives when 
the disk (USB in your case) is full. Can you check that and also try to figure 
out is a specific folder is being filled somehow ('df' and 'du' are your 
friends here)?

Cheers,
Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Sathishkumar 
Sivagurunathan
Sent: Thursday, October 16, 2014 1:18 PM
To: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: Video playback - 'intel_do_flush_locked failed. No space left on the 
device'

Hi,

I am running a gst based video player on tizen. The tizen image used is 
March 2014. The image is flashed into a USB and is booted on a laptop.
After sometime running the video, I am getting the following error 
"intel_do_flush_locked failed. No space left on the device".
Can anyone help me in this..

Thanks,
Sathish

~~Disclaimer~~~
Information contained and transmitted by this e-mail is confidential and 
proprietary to IGATE and its affiliates and is intended for use only by the 
recipient. If you are not the intended recipient, you are hereby notified that 
any dissemination, distribution, copying or use of this e-mail is strictly 
prohibited and you are requested to delete this e-mail immediately and notify 
the originator or mailad...@igate.com<mailto:mailad...@igate.com>. IGATE does 
not enter into any agreement with any party by e-mail. Any views expressed by 
an individual do not necessarily reflect the view of IGATE. IGATE is not 
responsible for the consequences of any actions taken on the basis 

RE: ssh connection time out when cloning sources

[VanCutsem, Geoffroy]

That snapshot should be fine and I believe Jf is wondering whether this always 
fails on the same git repo or if it tends to fail on different ones.

The most likely cause of this is network latency issues but if it *always* 
fails at the exact same point (i.e. the very same git repo every time) then it 
could also indicate a problem with that one specifically.

Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Grigory Ptashko
Sent: Friday, October 31, 2014 11:06 AM
To: Ding, Jian-feng
Cc: ivi
Subject: Re: ssh connection time out when cloning sources


Do you mean I should try another snapshot?
31.10.2014 12:52 пользователь "JF Ding" 
mailto:jian-feng.d...@intel.com>> написал:
Is the failed git tree always the same one?

thanks
- jf.ding


On Friday, October 31, 2014 at 4:48 PM, Grigory Ptashko wrote:
Hello.

I've got some issues with cloning the source code.

I've followed this manual:

https://source.tizen.org/ru/documentation/developer-guide/getting-started-guide/cloning-tizen-source?langredirect=1


I've set up the SSH access:

admin@node2:~/tizen_ivi_src$ ssh tizen

  Welcome to Gerrit Code Review

  Hi Grigory Ptashko, you have successfully connected over SSH.
...


Now I'm doing this:

admin@node2:~/tizen_ivi_src$ repo init -u tizen:scm/manifest -b tizen -m ivi.xml
remote: Counting objects: 234, done
remote: Finding sources: 100% (212/212)
remote: Total 365 (delta 126), reused 349 (delta 126)
Receiving objects: 100% (365/365), 157.84 KiB | 186.00 KiB/s, done.
Resolving deltas: 100% (200/200), done.
From tizen:scm/manifest
 * [new branch]  master -> origin/master
 * [new branch]  tizen  -> origin/tizen
 * [new branch]  tizen_2.1  -> origin/tizen_2.1
 * [new branch]  tizen_2.2  -> origin/tizen_2.2
 * [new tag] submit/tizen/20131009.013423 -> 
submit/tizen/20131009.013423
 * [new tag] submit/tizen/20131009.014050 -> 
submit/tizen/20131009.014050

Your identity is: Grigory Ptashko 
If you want to change this, please re-run 'repo init' with --config-name

repo has been initialized in /home/admin/tizen_ivi_src


Then this:

admin@node2:~/tizen_ivi_src$ wget 
http://download.tizen.org/releases/milestone/tizen/ivi-3.0.m14.3/tizen-3.0.m14.3-ivi_20141028.3/builddata/manifest/tizen-3.0.m14.3-ivi_20141028.3_arm.xml
 -O .repo/manifests/i
vi/projects.xml


And finally, while trying to clone sources, I get 'Connection timeout' BUT NOT
for all project:

admin@node2:~/tizen_ivi_src$ repo sync -j29
Fetching project platform/upstream/crda
Fetching project platform/core/api/bluetooth
Fetching project platform/upstream/iputils
Fetching project platform/core/api/poi
Fetching project platform/upstream/python
Fetching project platform/upstream/acl
Fetching project platform/upstream/nettle
Fetching project platform/core/system/oma-ds-agent
Fetching project platform/upstream/rpmlint-mini
Fetching project platform/upstream/dbus
Fetching project platform/upstream/gst-libav
Fetching project platform/upstream/pango
Fetching project platform/upstream/libthai
Fetching project platform/core/appfw/xdgmime
Fetching project platform/core/security/cynara
Fetching project platform/upstream/scons
Fetching project platform/upstream/gmp
Fetching project platform/upstream/ccache
Fetching project platform/upstream/vi
Fetching project platform/upstream/pciutils
Fetching project platform/upstream/libdaemon
Fetching project platform/upstream/flex
Fetching project platform/upstream/zip
Fetching project platform/core/appfw/libslp-db-util
Fetching project platform/upstream/hardlink
Fetching project profile/ivi/GhostCluster
Fetching project platform/upstream/zypper-plugin
Fetching project platform/upstream/libpng
Fetching project platform/upstream/libgcrypt
...
ssh: connect to host review.tizen.org port 22: 
Connection timed out
ssh: connect to host review.tizen.org port 22: 
Connection timed out
ssh: connect to host review.tizen.org port 22: 
Connection timed out
ssh: connect to host review.tizen.org port 22: 
Connection timed out
ssh: connect to host review.tizen.org port 22: 
Connection timed out
ssh: connect to host review.tizen.org port 22: 
Connection timed out
ssh: connect to host review.tizen.org port 22: 
Connection timed out
ssh: connect to host review.tizen.org port 22: 
Connection timed out
fatal: Could not read from remote repository.


I tried this several times, but the result is always the same.

What am I doing wrong?


Thank you,
Grigory.


--
Best regards,
Grigory Ptashko

+7 (916) 1489766
grigory.ptas...@gmail.com
skype grigory_ptashko
linkedi

RE: Video playback - 'intel_do_flush_locked failed. No space left on the device'

[VanCutsem, Geoffroy]

FYI, this may also be relevant to you: 
https://bugs.tizen.org/jira/browse/TC-1628

Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: VanCutsem, Geoffroy
Sent: Thursday, October 23, 2014 4:54 PM
To: Sathishkumar Sivagurunathan; ivi@lists.tizen.org
Subject: RE: Video playback - 'intel_do_flush_locked failed. No space left on 
the device'

A shot in the dark here: that seems like the typical message that arrives when 
the disk (USB in your case) is full. Can you check that and also try to figure 
out is a specific folder is being filled somehow ('df' and 'du' are your 
friends here)?

Cheers,
Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Sathishkumar 
Sivagurunathan
Sent: Thursday, October 16, 2014 1:18 PM
To: ivi@lists.tizen.org
Subject: Video playback - 'intel_do_flush_locked failed. No space left on the 
device'

Hi,

I am running a gst based video player on tizen. The tizen image used is 
March 2014. The image is flashed into a USB and is booted on a laptop.
After sometime running the video, I am getting the following error 
"intel_do_flush_locked failed. No space left on the device".
Can anyone help me in this..

Thanks,
Sathish

~~Disclaimer~~~
Information contained and transmitted by this e-mail is confidential and 
proprietary to IGATE and its affiliates and is intended for use only by the 
recipient. If you are not the intended recipient, you are hereby notified that 
any dissemination, distribution, copying or use of this e-mail is strictly 
prohibited and you are requested to delete this e-mail immediately and notify 
the originator or mailad...@igate.com<mailto:mailad...@igate.com>. IGATE does 
not enter into any agreement with any party by e-mail. Any views expressed by 
an individual do not necessarily reflect the view of IGATE. IGATE is not 
responsible for the consequences of any actions taken on the basis of 
information provided, through this email. The contents of an attachment to this 
e-mail may contain software viruses, which could damage your own computer 
system. While IGATE has taken every reasonable precaution to minimise this 
risk, we cannot accept liability for any damage which you sustain as a result 
of software viruses. You should carry out your own virus checks before opening 
an attachment. To know more about IGATE please visit 
www.igate.com<http://www.igate.com>.

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Question about multi-displays control on wayland protocol

[VanCutsem, Geoffroy]

Hi Andy,

There is some good info on multi-user/multi-seat architecture on these wiki 
pages:

-  https://wiki.tizen.org/wiki/Multi-user_Architecture

-  https://wiki.tizen.org/wiki/Multi-user_DisplayManagement

-  https://wiki.tizen.org/wiki/Multi-seat_Architecture

I hope this helps,
Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Yang Andy
Sent: Wednesday, October 08, 2014 9:38 AM
To: Wang, Ning W; ivi@lists.tizen.org; Clark, Joel
Subject: Question about multi-displays control on wayland protocol

Hello everyone

I have one question about multi-displays control on wayland protocol.

I want to control dual displays on wayland protocol.

For example,Display1 which is used to render map,while display2 which is used 
to render mp3-palyer.

Could anyone give me some advice about how to design the software archicecture 
based on wayland protocol?

[wayland/weston version]
1.5

[TizenIVI version]
TizenCommon

Thank you.

Andy

From: williamyan...@hotmail.com
To: ning.w.w...@intel.com; 
ivi@lists.tizen.org; 
joel.cl...@intel.com
Subject: RE: [TizenIVI 3.0]Question about multi-display on wayland protocol
Date: Mon, 31 Mar 2014 08:08:11 +
To：Joel,Ning

Thank you very much for your reply.

>Clone is not yet supported by Wayland/Weston, but I’ve been told it will be 
>available in the next Wayland
> release (1.5) due in April.  We plan to pull that into Tizen IVI as soon as 
> we can.

Clone mode is the same as extended mode?

I have seen some Demo products whick had implemted dual display on tizen IVI.

I want to control dual display on tizen IVI 3.0,could you give me some advice?

Thank you.

Andy.

From: williamyan...@hotmail.com
To: ning.w.w...@intel.com; 
ivi@lists.tizen.org
Subject: RE: [TizenIVI 3.0]Question about multi-display on wayland protocol
Date: Fri, 28 Mar 2014 10:22:40 +
To：Ning

Thank you very much for your reply.

>That is, if Display-1 is 1920x1080 and primary and Display-2 is 1920x1080 then 
>Display-1 output origin starts at x=0,y=0
>and Display-2 output origin starts at x=1920,y=0.
It means that if i draw a graphic start at x=1920,y=0.,its graphic will be 
drawed in display-2 ??

Andy.

From: ning.w.w...@intel.com
To: williamyan...@hotmail.com; 
ivi@lists.tizen.org
Subject: RE: [TizenIVI 3.0]Question about multi-display on wayland protocol
Date: Fri, 28 Mar 2014 06:29:49 +
Hi Andy,


AFAIK, weston desktop (desktop-shell) in IVI 3.0 supports dual display in 
extended mode out-of-box. That is, if Display-1 is 1920x1080 and primary and 
Display-2 is 1920x1080 then Display-1 output origin starts at x=0,y=0 and 
Display-2 output origin starts at x=1920,y=0.

Thanks,
Ning
From: ivi-boun...@lists.tizen.org 
[mailto:ivi-boun...@lists.tizen.org] On Behalf Of Yang Andy
Sent: Thursday, March 27, 2014 2:50 PM
To: ivi@lists.tizen.org
Subject: [TizenIVI 3.0]Question about multi-display on wayland protocol



Hello everyone

I have one question about multi-display on wayland protocol.

I want to control dual displays on wayland protocol.

I try to set wl_display_connect function,but it seen to be not useful.

Could anyone give me some advice about how to control dual displays on wayland 
protocol?

[TizenIVI version]
3.0

Thank you.

Andy
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Video playback - 'intel_do_flush_locked failed. No space left on the device'

[VanCutsem, Geoffroy]

A shot in the dark here: that seems like the typical message that arrives when 
the disk (USB in your case) is full. Can you check that and also try to figure 
out is a specific folder is being filled somehow ('df' and 'du' are your 
friends here)?

Cheers,
Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Sathishkumar 
Sivagurunathan
Sent: Thursday, October 16, 2014 1:18 PM
To: ivi@lists.tizen.org
Subject: Video playback - 'intel_do_flush_locked failed. No space left on the 
device'

Hi,

I am running a gst based video player on tizen. The tizen image used is 
March 2014. The image is flashed into a USB and is booted on a laptop.
After sometime running the video, I am getting the following error 
"intel_do_flush_locked failed. No space left on the device".
Can anyone help me in this..

Thanks,
Sathish

~~Disclaimer~~~
Information contained and transmitted by this e-mail is confidential and 
proprietary to IGATE and its affiliates and is intended for use only by the 
recipient. If you are not the intended recipient, you are hereby notified that 
any dissemination, distribution, copying or use of this e-mail is strictly 
prohibited and you are requested to delete this e-mail immediately and notify 
the originator or mailad...@igate.com. IGATE does 
not enter into any agreement with any party by e-mail. Any views expressed by 
an individual do not necessarily reflect the view of IGATE. IGATE is not 
responsible for the consequences of any actions taken on the basis of 
information provided, through this email. The contents of an attachment to this 
e-mail may contain software viruses, which could damage your own computer 
system. While IGATE has taken every reasonable precaution to minimise this 
risk, we cannot accept liability for any damage which you sustain as a result 
of software viruses. You should carry out your own virus checks before opening 
an attachment. To know more about IGATE please visit 
www.igate.com.

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: weston crashes when running IVI images in VMware player

[VanCutsem, Geoffroy]

> -Original Message-
> From: Kanavin, Alexander
> Sent: Tuesday, October 21, 2014 12:50 PM
> To: VanCutsem, Geoffroy; ivi@lists.tizen.org
> Subject: Re: weston crashes when running IVI images in VMware player
> 
> On 10/20/2014 07:58 PM, VanCutsem, Geoffroy wrote:
> 
> >> - VMware tells that "No 3D support available from the host. The 3D
> >> features of the virtual machine will be disabled."
> >
> > That's most likely the problem. The one thing that's missing with
> > VMWare Player under Linux is that 3D will work when there will be
> > TF2-S3TC Texture Support enabled in DRI. Problem is described here:
> > http://dri.freedesktop.org/wiki/S3TC/. Try to enable that and see if
> > that helps. This info used to be on the Tizen wiki page but I assume
> > it was removed because someone thought it was obsolete information, we
> > will add it back if you confirm this is the problem you are facing.
> 
> Yep, setting the environment variable force_s3tc_enable=true before
> launching vmplayer did the trick, thanks! You should update both the tizen
> wiki and the crosswalk documentation.

Thanks for confirming this solves your problem, I have updated the Tizen wiki 
(by adding back the old section) and created a pull request for the Crosswalk 
website.

Cheers,
Geoffroy

---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: weston crashes when running IVI images in VMware player

[VanCutsem, Geoffroy]

> -Original Message-
> From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Alexander
> Kanavin
> Sent: Monday, October 20, 2014 1:56 PM
> To: ivi@lists.tizen.org
> Subject: Re: weston crashes when running IVI images in VMware player
> 
> Hello Ulf,
> 
> I followed the instructions here:
> 
> https://crosswalk-
> project.org/#documentation/getting_started/tizen_target_setup
> 
> but they're essentially same. The instructions on crosswalk site also tell how
> to disable graphic driver blacklisting, which I did.
> 
> A couple more things:
> 
> - VMware tells that "No 3D support available from the host. The 3D features
> of the virtual machine will be disabled."

That's most likely the problem. The one thing that's missing with VMWare Player 
under Linux is that 3D will work when there will be TF2-S3TC Texture Support 
enabled in DRI. Problem is described here: 
http://dri.freedesktop.org/wiki/S3TC/. Try to enable that and see if that 
helps. This info used to be on the Tizen wiki page but I assume it was removed 
because someone thought it was obsolete information, we will add it back if you 
confirm this is the problem you are facing.

Thanks,
Geoffroy
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: The Modello packages name must not contains underscore "_"

[VanCutsem, Geoffroy]

> -Original Message-
> From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of ronan
> Sent: Thursday, October 02, 2014 12:07 PM
> Cc: ivi@lists.tizen.org
> Subject: Re: The Modello packages name must not contains underscore "_"
> 
> 
> > Currently, we don't use the wpa_supplicant package:
> I'm mean, we don't use the wpa_supplicant package from Tizen, but from
> yocto "wpa-supplicant"
Yep, I saw that in your list. Thanks!
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: The Modello packages name must not contains underscore "_"

[VanCutsem, Geoffroy]

> -Original Message-
> From: ronan [mailto:ronan.lemart...@open.eurogiciel.org]
> Sent: Thursday, October 02, 2014 9:11 AM
> To: VanCutsem, Geoffroy; Manuel Bachmann
> Cc: ivi@lists.tizen.org
> Subject: Re: The Modello packages name must not contains underscore "_"
> 
> 
> > I guess my question really was whether that meant that all these
> > exceptions listed on that page [1] are by default packages that could
> > never be included in any Yocto-based distribution?
> >
> If you take a pkg (eg:gstreamer-0_10)
> 
> yocto call the recipes file:
> gstreamer_0.10.36.bb
> 
> for ${PN}_${PV}.bb
> 
> PN: package name
> PV: package version
> 
> and when the rpm is generate, the file is named:
> ${PN}-${PV}-${PR}.${ARCH}.rpm
> 
> the underscore "_" is reserve by yocto for recipes name/version delimiter so :
>   - Modello_Installer_git.bb mean => PN=Modello PV=Installer_git
Thanks for this explanation, this helps me understand this better.

How do you handle the wpa_supplicant case for example?

> 
> 
> If you want a alignment between Tizen from OBS/yocto you need to have
> the same package name.
> 
> Modello_Installer should become Modello-Installer
> 
> Consider the problem in an other view point:
>   Does anyone have a justification to keep the actual Modello_* %name
> for the rpm files generate?
I don't, I have no issue with changing the name if it makes life easier for 
everyone.

Thanks,
Geoffroy

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: The Modello packages name must not contains underscore "_"

[VanCutsem, Geoffroy]

From: Manuel Bachmann [mailto:manuel.bachm...@open.eurogiciel.org]
Sent: Wednesday, October 01, 2014 6:16 PM
To: VanCutsem, Geoffroy
Cc: ronan; ivi@lists.tizen.org
Subject: Re: The Modello packages name must not contains underscore "_"

Hi Geoffroy,

Yes, that is the issue : It cannot build.

I guess my question really was whether that meant that all these exceptions 
listed on that page [1] are by default packages that could never be included in 
any Yocto-based distribution?

[1] http://fedoraproject.org/wiki/Packaging:NamingGuidelines#Separators
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: The Modello packages name must not contains underscore "_"

[VanCutsem, Geoffroy]

> -Original Message-
> Yocto do NOT support the underscore "_" in package name.
> And we want to build Tizen with Yocto .
Out of curiosity, does that mean that Yocto just *cannot* build any of these?

Cheers,
Geoffroy
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Booting Tizen image from VM on 32 bit windows host

[VanCutsem, Geoffroy]

Hi Prathamesh,

I used to run that version of VMware Player successfully but that was always on 
64-bit host systems.

That error message may just be an indication that the system is up and running 
but the graphical environment is not. We're not starting a login prompt on the 
default tty Can you check if you get a login prompt on other tty (Ctrl-Alt-F2 
or F3 or...)

The first cause for graphics to fail is that 3D acceleration is not enabled for 
your VM. Can you check in the VM properties that the 'Accelerate 3D graphics' 
option (under 'Display') is checked?

Thanks,
Geoffroy

From: Prathamesh P Ghanekar [mailto:prathamesh.ghane...@igate.com]
Sent: Wednesday, October 01, 2014 8:00 AM
To: VanCutsem, Geoffroy; ivi@lists.tizen.org
Subject: RE: Booting Tizen image from VM on 32 bit windows host

Hi Geoffroy,


Thanks for your reply.

1) I am getting the following error:
Drivers/rtc/hctosys.c :unable to open rtc device(rtc0)
And, system hangs at boot.

2) I am using VM Ware player version - 5.0.2 build-1031769

3) https://wiki.tizen.org/wiki/IVI/Tizen-IVI_3.0-M2-March2014
This is the tizen image I am using.

Regards,
Prathamesh
From: VanCutsem, Geoffroy [mailto:geoffroy.vancut...@intel.com]
Sent: 30 September 2014 18:04
To: Prathamesh P Ghanekar; ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: RE: Booting Tizen image from VM on 32 bit windows host

Hi Prathamesh,

I have never tried to run this on a Windows 32-bit system, it's known to work 
on 64-bit systems. Can you give us some more details on the failure:

-  What Tizen image are you trying to run

-  What version of VMware

-  How is it failing?

Thanks,
Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Prathamesh P 
Ghanekar
Sent: Tuesday, September 30, 2014 1:27 PM
To: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: Booting Tizen image from VM on 32 bit windows host

Hi,

I am trying to boot tizen vmdk image in VMWare environment. But, I am failing 
to do so on a 32 bit windows host system. Is this a known issue?

Regards,
Prathamesh

~~Disclaimer~~~
Information contained and transmitted by this e-mail is confidential and 
proprietary to IGATE and its affiliates and is intended for use only by the 
recipient. If you are not the intended recipient, you are hereby notified that 
any dissemination, distribution, copying or use of this e-mail is strictly 
prohibited and you are requested to delete this e-mail immediately and notify 
the originator or mailad...@igate.com<mailto:mailad...@igate.com>. IGATE does 
not enter into any agreement with any party by e-mail. Any views expressed by 
an individual do not necessarily reflect the view of IGATE. IGATE is not 
responsible for the consequences of any actions taken on the basis of 
information provided, through this email. The contents of an attachment to this 
e-mail may contain software viruses, which could damage your own computer 
system. While IGATE has taken every reasonable precaution to minimise this 
risk, we cannot accept liability for any damage which you sustain as a result 
of software viruses. You should carry out your own virus checks before opening 
an attachment. To know more about IGATE please visit 
www.igate.com<http://www.igate.com>.


Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.

~~Disclaimer~~~
Information contained and transmitted by this e-mail is confidential and 
proprietary to IGATE and its affiliates and is intended for use only by the 
recipient. If you are not the intended recipient, you are hereby notified that 
any dissemination, distribution, copying or use of this e-mail is strictly 
prohibited and you are requested to delete this e-mail immediately and notify 
the originator or mailad...@igate.com<mailto:mailad...@igate.com>. IGATE does 
not enter into any agreement with any party by e-mail. Any views expressed by 
an individual do not necessarily reflect the view of IGATE. IGATE is not 
responsible for the consequences of any actions taken on the basis of 
information provided, through this email. The contents of an attachment to this 
e-mail may contain software viruses, which could damage your own computer 
system. While IGATE has 

RE: Booting Tizen image from VM on 32 bit windows host

[VanCutsem, Geoffroy]

Hi Prathamesh,

I have never tried to run this on a Windows 32-bit system, it's known to work 
on 64-bit systems. Can you give us some more details on the failure:

-  What Tizen image are you trying to run

-  What version of VMware

-  How is it failing?

Thanks,
Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Prathamesh P 
Ghanekar
Sent: Tuesday, September 30, 2014 1:27 PM
To: ivi@lists.tizen.org
Subject: Booting Tizen image from VM on 32 bit windows host

Hi,

I am trying to boot tizen vmdk image in VMWare environment. But, I am failing 
to do so on a 32 bit windows host system. Is this a known issue?

Regards,
Prathamesh

~~Disclaimer~~~
Information contained and transmitted by this e-mail is confidential and 
proprietary to IGATE and its affiliates and is intended for use only by the 
recipient. If you are not the intended recipient, you are hereby notified that 
any dissemination, distribution, copying or use of this e-mail is strictly 
prohibited and you are requested to delete this e-mail immediately and notify 
the originator or mailad...@igate.com. IGATE does 
not enter into any agreement with any party by e-mail. Any views expressed by 
an individual do not necessarily reflect the view of IGATE. IGATE is not 
responsible for the consequences of any actions taken on the basis of 
information provided, through this email. The contents of an attachment to this 
e-mail may contain software viruses, which could damage your own computer 
system. While IGATE has taken every reasonable precaution to minimise this 
risk, we cannot accept liability for any damage which you sustain as a result 
of software viruses. You should carry out your own virus checks before opening 
an attachment. To know more about IGATE please visit 
www.igate.com.

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: mounting the USB as a normal user using udisksctl

[VanCutsem, Geoffroy]

Hi Prathamesh,

Can you review this Feature Request in JIRA and let me know if you see any gaps 
versus what you'd like to do (I believe it covers it): 
https://bugs.tizen.org/jira/browse/TC-614

The current status is that the solution put in place is blocked by 2 P1 bugs 
(respectively TC-50 and TC-105) and these are actively being worked on. Of 
course if you have patches to contribute to fix these, don't be shy! ;-)

Thanks,
Geoffroy

From: Prathamesh P Ghanekar [mailto:prathamesh.ghane...@igate.com]
Sent: Friday, September 19, 2014 11:45 AM
To: VanCutsem, Geoffroy; ivi@lists.tizen.org
Subject: RE: mounting the USB as a normal user using udisksctl

Hi Geoffroy

Thanks for your reply. Let me tell you my requirement in brief.

I want to access the contents of USB from my application as a normal user. At 
the same time, I need USB insertion and removal events/notifications.

I am able to achieve the first part through smackfsroot='*',smafsdef='*' 
options, to the mount command.
But, when I do such a mount, I can't get the USB insertion and removal events 
programmatically using udisks APIs or "Udisksctl monitor" utility.

Can you suggest a solution for the above mentioned requirement, with or without 
using udisks?

Thanks in advance,
Prathamesh

From: VanCutsem, Geoffroy [mailto:geoffroy.vancut...@intel.com]
Sent: 19 September 2014 14:02
To: Prathamesh P Ghanekar; ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: RE: mounting the USB as a normal user using udisksctl

Hi Prathamesh,

This is most likely the same problem as reported here: 
https://bugs.tizen.org/jira/i#browse/TC-50 (yet unresolved).

Thanks,
Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Prathamesh P 
Ghanekar
Sent: Friday, September 19, 2014 7:57 AM
To: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: mounting the USB as a normal user using udisksctl

Hi,

I am trying to mount the USB as a normal user using "udisksctl mount  -b 
/dev/" command.
But, it gives me the following error.
Error mounting /dev/sdc: 
GDBus.Error:org.freedesktop.UDisks2.Error.NotAuthorizedCanObtain: Not 
authorized to perform operation

As root, I am able to do it. How can I mount a device as a normal user using 
udiskctl?

Regards,
Prathamesh

~~Disclaimer~~~
Information contained and transmitted by this e-mail is confidential and 
proprietary to IGATE and its affiliates and is intended for use only by the 
recipient. If you are not the intended recipient, you are hereby notified that 
any dissemination, distribution, copying or use of this e-mail is strictly 
prohibited and you are requested to delete this e-mail immediately and notify 
the originator or mailad...@igate.com<mailto:mailad...@igate.com>. IGATE does 
not enter into any agreement with any party by e-mail. Any views expressed by 
an individual do not necessarily reflect the view of IGATE. IGATE is not 
responsible for the consequences of any actions taken on the basis of 
information provided, through this email. The contents of an attachment to this 
e-mail may contain software viruses, which could damage your own computer 
system. While IGATE has taken every reasonable precaution to minimise this 
risk, we cannot accept liability for any damage which you sustain as a result 
of software viruses. You should carry out your own virus checks before opening 
an attachment. To know more about IGATE please visit 
www.igate.com<http://www.igate.com>.


Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.

~~Disclaimer~~~
Information contained and transmitted by this e-mail is confidential and 
proprietary to IGATE and its affiliates and is intended for use only by the 
recipient. If you are not the intended recipient, you are hereby notified that 
any dissemination, distribution, copying or use of this e-mail is strictly 
prohibited and you are requested to delete this e-mail immediately and notify 
the originator or mailad...@igate.com<mailto:mailad...@igate.com>. IGATE does 
not enter into any agreement with any party by e-mail. Any views expressed by 
an individual do not necessarily reflect the view of IGATE. IGATE is not 
responsible for the consequences of any action

RE: mounting the USB as a normal user using udisksctl

[VanCutsem, Geoffroy]

Hi Prathamesh,

This is most likely the same problem as reported here: 
https://bugs.tizen.org/jira/i#browse/TC-50 (yet unresolved).

Thanks,
Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Prathamesh P 
Ghanekar
Sent: Friday, September 19, 2014 7:57 AM
To: ivi@lists.tizen.org
Subject: mounting the USB as a normal user using udisksctl

Hi,

I am trying to mount the USB as a normal user using "udisksctl mount  -b 
/dev/" command.
But, it gives me the following error.
Error mounting /dev/sdc: 
GDBus.Error:org.freedesktop.UDisks2.Error.NotAuthorizedCanObtain: Not 
authorized to perform operation

As root, I am able to do it. How can I mount a device as a normal user using 
udiskctl?

Regards,
Prathamesh

~~Disclaimer~~~
Information contained and transmitted by this e-mail is confidential and 
proprietary to IGATE and its affiliates and is intended for use only by the 
recipient. If you are not the intended recipient, you are hereby notified that 
any dissemination, distribution, copying or use of this e-mail is strictly 
prohibited and you are requested to delete this e-mail immediately and notify 
the originator or mailad...@igate.com. IGATE does 
not enter into any agreement with any party by e-mail. Any views expressed by 
an individual do not necessarily reflect the view of IGATE. IGATE is not 
responsible for the consequences of any actions taken on the basis of 
information provided, through this email. The contents of an attachment to this 
e-mail may contain software viruses, which could damage your own computer 
system. While IGATE has taken every reasonable precaution to minimise this 
risk, we cannot accept liability for any damage which you sustain as a result 
of software viruses. You should carry out your own virus checks before opening 
an attachment. To know more about IGATE please visit 
www.igate.com.

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: how to make Xwayland auto start on tizen-ivi-3.0 image

[VanCutsem, Geoffroy]

> -Original Message-
> From: Pekka Paalanen [mailto:ppaala...@gmail.com]
> Sent: Wednesday, September 03, 2014 9:04 AM
> To: Steve (YiLiang) Zhou
> Cc: VanCutsem, Geoffroy; ivi@lists.tizen.org; wayland-
> de...@lists.freedesktop.org
> Subject: Re: how to make Xwayland auto start on tizen-ivi-3.0 image
> 
> On Tue, 2 Sep 2014 10:14:44 +0800
> "Steve (YiLiang) Zhou"  wrote:
> 
> > Thanks Geoffroy,
> >
> > Your information is very important for me ,  I'm sure that xwayland
> > module is loaded ,  so is it possible that I startup Weston with root
> > and start a shell script automatically which execute xwayland in it?
> 
> FWIW, when xwayland.so is loaded into Weston, Weston itself will be
> listening on the X11 display socket for connections. When the first
> X11 client connects, it will spawn the Xwayland X server to handle that and 
> all
> following X11 clients.
> 
> I suppose all you need is the DISPLAY environment variable, and know when
> Weston is ready to receive X11 connections. I believe xwayland.so module
> sets the DISPLAY variable for all child processes of Weston.
One additional note on this is that we start Weston as a standard user (not 
root).

> 
> 
> Thanks,
> pq
> 
> > From: VanCutsem, Geoffroy [mailto:geoffroy.vancut...@intel.com]
> > Sent: Tuesday, September 02, 2014 12:28 AM
> > To: Steve (YiLiang) Zhou; ivi@lists.tizen.org
> > Cc: wayland-de...@lists.freedesktop.org
> > Subject: RE: how to make Xwayland auto start on tizen-ivi-3.0 image
> >
> >
> >
> > Hi Steve,
> >
> >
> >
> > We are using systemd in Tizen 3.0 (Tizen 2.x uses SysV init). I've
> > never tried to run xwayland but Weston should be starting
> > automatically and I _believe_ all you need is to make sure the
> > xwayland module is also loaded (by adding module=xwayland.so to your
> weston.ini).
> >
> >
> >
> > Hope this helps,
> >
> > Geoffroy
> >
> >
> >
> > From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Steve
> > (YiLiang) Zhou
> > Sent: Monday, September 01, 2014 10:09 AM
> > To: ivi@lists.tizen.org
> > Cc: wayland-de...@lists.freedesktop.org
> > Subject: how to make Xwayland auto start on tizen-ivi-3.0 image
> >
> >
> >
> > Dear all,
> >
> > I have a tizen device which run a wayland tizen-ivi-3.0 image ,we
> > built xwayland on it , but right now I have to start it manually, I
> > want to make it auto start like tizen-ivi-2.0 image.
> >
> > I can't find the files like inittab or rc.sysinit ,so I want to figure
> > out how it startup and how to startup xwayland automatically.
> >
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: how to make Xwayland auto start on tizen-ivi-3.0 image

[VanCutsem, Geoffroy]

Hi Steve,

We are using systemd in Tizen 3.0 (Tizen 2.x uses SysV init). I've never tried 
to run xwayland but Weston should be starting automatically and I _believe_ all 
you need is to make sure the xwayland module is also loaded (by adding 
module=xwayland.so to your weston.ini).

Hope this helps,
Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Steve (YiLiang) Zhou
Sent: Monday, September 01, 2014 10:09 AM
To: ivi@lists.tizen.org
Cc: wayland-de...@lists.freedesktop.org
Subject: how to make Xwayland auto start on tizen-ivi-3.0 image

Dear all,
I have a tizen device which run a wayland tizen-ivi-3.0 image ,we built 
xwayland on it , but right now I have to start it manually, I want to make it 
auto start like tizen-ivi-2.0 image.
I can't find the files like inittab or rc.sysinit ,so I want to figure out how 
it startup and how to startup xwayland automatically.
Any idear?

Thanks and Best Regards
Steve Zhou


CONFIDENTIALITY NOTICE: The information contained in this message may be 
privileged and/or confidential. If you are not the intended recipient, or 
responsible for delivering this message to the intended recipient, any review, 
forwarding, dissemination, distribution or copying of this communication or any 
attachment(s) is strictly prohibited. If you have received this message in 
error, please notify the sender immediately, and delete it and all attachments 
from your computer and network.
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: PTREL-792 Re: Video on QT-wayland error

[VanCutsem, Geoffroy]

It's been a little while since I looked at the details but one of the key issue 
here was that Tizen uses Gstreamer 1.x and Qt had not been ported to it (at 
least back when PTREL-792 was filed). It would need Gstreamer 0.10 to run 
properly.

Geoffroy

> -Original Message-
> From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Jay D Bhatt
> Sent: Monday, September 01, 2014 2:45 PM
> To: Philippe Coval
> Cc: ivi@lists.tizen.org
> Subject: RE: PTREL-792 Re: Video on QT-wayland error
> 
> Hi Philippe,
> 
> I still face the same issue. After removing libva libraries, the issue 
> persists.
> 
> I work on Tizen-3.0 march MBR image for Intel Arch.
> 
> If I use .ogg file, the I get error “ autoaudiosink element is missing” . If 
> I use
> .avi file, then I get error "No decoder available for type 'video/x-
> msvideo'.your gstreamer installation is missing a plug-in" .
> 
> Ideally I have installed all plugins through zypper install.
> 
> Thanks,
> Jay
> 
> -Original Message-
> From: Philippe Coval [mailto:philippe.co...@open.eurogiciel.org]
> Sent: 01 September 2014 17:43
> To: Jay D Bhatt
> Cc: ivi@lists.tizen.org
> Subject: PTREL-792 Re: Video on QT-wayland error
> 
> On 01/09/2014 13:58, Philippe Coval wrote:
> >
> > 2014-09-01 13:56 GMT+02:00 Jay D Bhatt :
> >> Hi,
> >>
> >>
> >>
> >> I am trying out video playing on qt-wayland on tizen-3.0.
> I just tested this lately and on X11 released images on Tizen:Common and I
> face the same issues as described at :
> 
> https://bugs.tizen.org/jira/browse/PTREL-792
> >>
> >>
> >> I installed all QT related packages and gstreamer related packages.
> >> Then I installed the rpm of qt-tizen present in platform/upstream. On
> >> playing file with command “qmlscene video.qml”.
> >>
> >>
> >>
> >> It does not play file, it says “ autoaudiosink element is missing” .
> >> A white window opens but no video in it.  I have tried giving paths
> >> of .ogg and .avi file in video.qml present in /home/app.
> 
> Can you try again after removing gstreamer-vaapi It does work fine on
> Tizen:Common I tested lately
> 
> This is a known issue between project, it does also affect EFL's emotion
> 
> >
> 
> >> Is the QT not rendering video? Or I need to install some more
> >> packages to play video file?
> >>
> just remove libva and you should see video again
> >>
> >>
> >> Thanks,
> keep us updated at
> 
> https://bugs.tizen.org/jira/browse/PTREL-792
> 
> I'll forward the bug
> 
> later
> 
> 
> 
> --
>   mailto:philippe.co...@eurogiciel.fr  --  gpg:0x467094BC
>   xmpp:philippe.coval@gmail.com
>   https://dockr.eurogiciel.fr/blogs/embedded/author/pcl/
> .
> 
> 
> ~~Discl
> aimer~
> ~~
> Information contained and transmitted by this e-mail is confidential and
> proprietary to IGATE and its affiliates and is intended for use only by the
> recipient. If you are not the intended recipient, you are hereby notified that
> any dissemination, distribution, copying or use of this e-mail is strictly
> prohibited and you are requested to delete this e-mail immediately and
> notify the originator or mailad...@igate.com
> . IGATE does not enter into any agreement
> with any party by e-mail. Any views expressed by an individual do not
> necessarily reflect the view of IGATE. IGATE is not responsible for the
> consequences of any actions taken on the basis of information provided,
> through this email. The contents of an attachment to this e-mail may contain
> software viruses, which could damage your own computer system. While
> IGATE has taken every reasonable precaution to minimise this risk, we
> cannot accept liability for any damage which you sustain as a result of
> software viruses. You should carry out your own virus checks before opening
> an attachment. To know more about IGATE please visit www.igate.com
> .
> ~~
> ~~
> 
> ___
> IVI mailing list
> IVI@lists.tizen.org
> https://lists.tizen.org/listinfo/ivi
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: 回复：RE: 回复：RE: Problem : Tizen downloadRequest

[VanCutsem, Geoffroy]

I believe the Download API of that version does work (the difference under the 
hood is that the tizen_20140422.1 aka 3.0-M2-March2014 image is based on 
Webkit).
Cheers,
Geoffroy

From: black [mailto:946171...@qq.com]
Sent: Friday, August 29, 2014 3:59 AM
To: VanCutsem, Geoffroy
Cc: ivi; application-dev
Subject: 回复：RE: 回复：RE: Problem : Tizen downloadRequest

Thank you for your reply.
I will merge the fixed code and test again.

By the way, is it possible that 'Download API' of following version  can be 
used?
‍
■http://download.tizen.org/releases/milestone/tizen/ivi/tizen_20140422.1/‍


-- 原始邮件 ------
发件人: "VanCutsem, 
Geoffroy";mailto:geoffroy.vancut...@intel.com>>;
发送时间: 2014年8月28日(星期四) 晚上6:43
收件人: "black"<946171...@qq.com<mailto:946171...@qq.com>>;
抄送: "ivi"mailto:ivi@lists.tizen.org>>; 
"application-dev"mailto:application-...@lists.tizen.org>>;
主题: RE: 回复：RE: Problem : Tizen downloadRequest

I’m assuming you are therefore now using a Tizen IVI image that uses Crosswalk. 
The ‘Download API’ is not quite ready yet for Crosswalk in IVI. You can check 
the status via the following bug reports:

- Feature request: https://crosswalk-project.org/jira/browse/XWALK-1070

- Bug report: https://crosswalk-project.org/jira/browse/XWALK-2400

After checking the comments in XWALK-1070 it looks like it’s just been 
implemented/fixed in Crosswalk and should therefore shortly find its way into 
Tizen IVI.

Geoffroy

From: black [mailto:946171...@qq.com]
Sent: Thursday, August 28, 2014 12:21 PM
To: VanCutsem, Geoffroy
Cc: ivi; application-dev
Subject: 回复：RE: Problem : Tizen downloadRequest


Thank you for your reply.
I just used the latest modified IVI , the error has been resolved.

But, when I used that example code, the listener returned "error name : 
InvalidAccessError " which is not explained in API References.

-- 原始邮件 --
发件人: "VanCutsem, 
Geoffroy";mailto:geoffroy.vancut...@intel.com>>;
发送时间: 2014年8月28日(星期四) 凌晨0:34
收件人: "black"<946171...@qq.com<mailto:946171...@qq.com>>; 
"ivi"mailto:ivi@lists.tizen.org>>;
主题: RE: Problem : Tizen downloadRequest

Can you confirm which version of Tizen IVI you are using?

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of black
Sent: Wednesday, August 27, 2014 4:25 AM
To: ivi
Subject: Problem : Tizen downloadRequest

When I use the Tizen API

 var downloadRequest = new 
tizen.DownloadRequest("http://download.tizen.org/tools/README.txt";, 
"documents");

 downloadId = tizen.download.start(downloadRequest, listener);
following Error occurred ：
ivi_box wrt_launchpad_daemon[227]: ERR<797>:evas_main evas_object_smart.c:749 
evas_object_smart_need_recalculate_set() Object 0x96b7710 is not stable during 
recalc loop

How to resolve this issue.  Please help.

Thanks a lot!‍

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: 回复：RE: Problem : Tizen downloadRequest

[VanCutsem, Geoffroy]

I’m assuming you are therefore now using a Tizen IVI image that uses Crosswalk. 
The ‘Download API’ is not quite ready yet for Crosswalk in IVI. You can check 
the status via the following bug reports:

-  Feature request: https://crosswalk-project.org/jira/browse/XWALK-1070

-  Bug report: https://crosswalk-project.org/jira/browse/XWALK-2400

After checking the comments in XWALK-1070 it looks like it’s just been 
implemented/fixed in Crosswalk and should therefore shortly find its way into 
Tizen IVI.

Geoffroy

From: black [mailto:946171...@qq.com]
Sent: Thursday, August 28, 2014 12:21 PM
To: VanCutsem, Geoffroy
Cc: ivi; application-dev
Subject: 回复：RE: Problem : Tizen downloadRequest


Thank you for your reply.
I just used the latest modified IVI , the error has been resolved.

But, when I used that example code, the listener returned "error name : 
InvalidAccessError " which is not explained in API References.

-- 原始邮件 ------
发件人: "VanCutsem, 
Geoffroy";mailto:geoffroy.vancut...@intel.com>>;
发送时间: 2014年8月28日(星期四) 凌晨0:34
收件人: "black"<946171...@qq.com<mailto:946171...@qq.com>>; 
"ivi"mailto:ivi@lists.tizen.org>>;
主题: RE: Problem : Tizen downloadRequest

Can you confirm which version of Tizen IVI you are using?

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of black
Sent: Wednesday, August 27, 2014 4:25 AM
To: ivi
Subject: Problem : Tizen downloadRequest

When I use the Tizen API

 var downloadRequest = new 
tizen.DownloadRequest("http://download.tizen.org/tools/README.txt";, 
"documents");

 downloadId = tizen.download.start(downloadRequest, listener);
following Error occurred ：
ivi_box wrt_launchpad_daemon[227]: ERR<797>:evas_main evas_object_smart.c:749 
evas_object_smart_need_recalculate_set() Object 0x96b7710 is not stable during 
recalc loop


How to resolve this issue.  Please help.

Thanks a lot!‍

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Problem : Tizen downloadRequest

[VanCutsem, Geoffroy]

Can you confirm which version of Tizen IVI you are using?

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of black
Sent: Wednesday, August 27, 2014 4:25 AM
To: ivi
Subject: Problem : Tizen downloadRequest

When I use the Tizen API

 var downloadRequest = new 
tizen.DownloadRequest("http://download.tizen.org/tools/README.txt";, 
"documents");

 downloadId = tizen.download.start(downloadRequest, listener);
following Error occurred ：
ivi_box wrt_launchpad_daemon[227]: ERR<797>:evas_main evas_object_smart.c:749 
evas_object_smart_need_recalculate_set() Object 0x96b7710 is not stable during 
recalc loop


How to resolve this issue.  Please help.

Thanks a lot!‍
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Ethernet and Sound Cards not detecting for EFI image

[VanCutsem, Geoffroy]

Sounds like there may not be drivers in your kernel for these devices. What 
platform are you using?

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Jay D Bhatt
Sent: Wednesday, August 27, 2014 1:26 PM
To: ivi@lists.tizen.org
Subject: Ethernet and Sound Cards not detecting for EFI image

Hi,

I am working on TIzen EFI image and I found that the Ethernet and sound cards 
are not getting detected for March Release. I also tried working on June EFI 
Tizen image but , still it has same problem.

If I do ifconfig, I don't get ipaddress ( my etherent cable is connected). 
Similarly, when I do "aplay -l" command I get "no sound cards found" as output. 
I face these issues on both releases.

Is there any workaround for these problems?

Thanks,
Jay

~~Disclaimer~~~
Information contained and transmitted by this e-mail is confidential and 
proprietary to IGATE and its affiliates and is intended for use only by the 
recipient. If you are not the intended recipient, you are hereby notified that 
any dissemination, distribution, copying or use of this e-mail is strictly 
prohibited and you are requested to delete this e-mail immediately and notify 
the originator or mailad...@igate.com. IGATE does 
not enter into any agreement with any party by e-mail. Any views expressed by 
an individual do not necessarily reflect the view of IGATE. IGATE is not 
responsible for the consequences of any actions taken on the basis of 
information provided, through this email. The contents of an attachment to this 
e-mail may contain software viruses, which could damage your own computer 
system. While IGATE has taken every reasonable precaution to minimise this 
risk, we cannot accept liability for any damage which you sustain as a result 
of software viruses. You should carry out your own virus checks before opening 
an attachment. To know more about IGATE please visit 
www.igate.com.

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Running HTML5 Modello applications under a recent IVI image

[VanCutsem, Geoffroy]

Hi Manuel,

We have renamed the packages when we gave that HTML5 UI its new name (Modello). 
The new git repos/packages are “profile/ivi/Modello_*”. This is what you should 
use in the latest images based on Crosswalk.

Thanks,
Geoffroy

From: Manuel Bachmann [mailto:manuel.bachm...@open.eurogiciel.org]
Sent: Wednesday, July 02, 2014 9:54 PM
To: ivi@lists.tizen.org
Cc: VanCutsem, Geoffroy
Subject: Running HTML5 Modello applications under a recent IVI image

Hi folks,
I am trying to install and run the "Modello" applications from the "html5_UI_*" 
repos (html5_UI_HomeScreen, html5_UI_Phone...) under the latest IVI snapshot.

As Tizen recently switched from WRT to Crosswalk, most of dependencies and 
directives of these repos (wrt-installer, wrt-plugins-ivi, ...) are now 
obsolete. Plus, they don't seem to work well out-of-the-box.

Is there any new branch or repo I should be using instead of the 
"profile/ivi/html5_UI_*" ones ?

--
Regards,

Manuel BACHMANN
Tizen Project
VANNES-FR
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: [Crosswalk-dev] Tizen IVI Build bot fails at installing packages

[VanCutsem, Geoffroy]

I don’t quite yet understand what is wrong but there are two git trees 
providing each a different version of sysman (system-server and libslp-sysman), 
this is true in both Tizen Common and Tizen IVI. One difference I noted is that 
libslp-sysman in Tizen:IVI was not submitted from GBS (it was a copypac of the 
version in Tizen Common), I don’t know if that’s the cause of your trouble but 
it’s something the REs should fix anyway. Copying the Tizen IVI mailing list as 
this is more a Tizen IVI problem than a Crosswalk one.

Geoffroy



From: Crosswalk-dev [mailto:crosswalk-dev-boun...@lists.crosswalk-project.org] 
On Behalf Of Romuald TEXIER-MARCADÉ
Sent: Monday, June 30, 2014 9:20 PM
To: crosswalk-dev
Subject: [Crosswalk-dev] Tizen IVI Build bot fails at installing packages


[   88s] installing system-server-2.0.0-4.1

[   88s]file /usr/bin/regpmon from install of system-server-2.0.0-4.1.i686 
conflicts with file from package sysman-2.0.0-3.3.i686

[   88s]file /usr/bin/set_pmon from install of system-server-2.0.0-4.1.i686 
conflicts with file from package sysman-2.0.0-3.3.i686

[   88s] exit ...





Is there something broken in the IVI repos?



Tizen Common Bot is working well.



Regards,



Romuald.
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: [TizenIVI 3.0]HTML5 WebAPP can not display camera video

[VanCutsem, Geoffroy]

Hi Andy,

I believe the right API for opening a camera device and accessing its stream is 
getUserMedia(). What parameters have you used so far with your  tag?

Thanks,
Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Yang Andy
Sent: Thursday, June 26, 2014 11:19 AM
To: ivi@lists.tizen.org
Subject: RE: [TizenIVI 3.0]HTML5 WebAPP can not display camera video

Hello everyone

How does webframework/webkit open camera device?

Andy

From: williamyan...@hotmail.com
To: ivi@lists.tizen.org
Subject: [TizenIVI 3.0]HTML5 WebAPP can not display camera video
Date: Thu, 26 Jun 2014 07:45:57 +





Hello everyone

I have developed a HTML5 WebApp with  tab for displaying camera video.

When i run this webapp on VTC1010 device,it can not display camera video.

I got some error message from the console.

[Error Message]
6月 26 00:23:25 ivi_box WebProcess[295]: gboolean 
WebCore::MediaPlayerPrivateGStreamer::handleMessage(GstMessage*)(1076) > ERROR: 
GST_MESSAGE_ERROR 5: Could not open resource for reading. (url=camera://1)
6月 26 00:23:25 ivi_box WebProcess[295]: void 
WebCore::MediaPlayerPrivateGStreamer::loadingFailed(WebCore::MediaPlayer::NetworkState)(1914)
 > ERROR: NetworkState : 4

But it can display camera video by the same webapp on the PC machine.

Could anyone give me some advice?

Thank you.

Andy
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Re: Can not Boot Tizen Common on Exynos4412

[VanCutsem, Geoffroy]

It looks like the kernel picked up the filesystem and could load drivers. Maybe 
this is just a problem with the graphical environment. Can you try to do a 
'Ctrl-Alt-F2' to see if you get a console (or try also Ctrl-Alt-F3 to F6).

Geoffroy

From: kongling [mailto:k870818...@outlook.com]
Sent: Friday, June 27, 2014 8:09 AM
To: VanCutsem, Geoffroy; philippe.co...@open.eurogiciel.org; 
dominig.arf...@fridu.net
Cc: ivi@lists.tizen.org
Subject: RE: Re: Can not Boot Tizen Common on Exynos4412

Thanks for your help!

1) Make sure you have the driver for the MMC controller built-in (given you 
don?t use an initrd)
2) Double-check the device/partition name of the MMC card
3) Insert a ?rootwait? in your kernel command-line
4) Have you replaced the /sbin/init file on the Tizen filesystem by any chance?

I checked these items again.
Smacks is already disabled.
Since it can boot with ubuntu file-system,i think 1) is no problem.
I never change the files on the Tizen filesystem but /lib/modules/3.5.0-rc6 .

the device/partition name of the MMC card:
Device Boot  Start End  Blocks   Id  System
/dev/mmcblk0p1   *2048  206847  102400c  W95 FAT32 (LBA)
/dev/mmcblk0p2  2068482117836710485760   83  Linux
/dev/mmcblk0p32117836825372671 2097152   83  Linux
/dev/mmcblk0p42537267230535679 2581504   83  Linux

Now,i change the bootargs and add some logs in the kernel source(in function 
kernel_execve),it's still not working.

root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait console=ttySAC2,115200 noinitrd 
init=/sbin/init

During the log, i wonder if the systemd is worked.Did it really get stuck in 
/sbin/init or systemd is worked but i just don't know?

log:
[5.60] ft5x0x_ts 3-0038: Firmware version 0xa6
[5.60] ft5x0x_ts 3-0038: FocalTech ft5x0x TouchScreen initialized
[5.61] s3c-rtc s3c64xx-rtc: setting system clock to 2013-01-01 12:00:02
UTC (1357041602)
[5.615000] hotplug_policy_init: intialised with policy : DVFS_NR_BASED_HOTPL
UG
[5.625000] ALSA device list:
[5.625000]   #0: iTOP-4412-Audio
[6.125000] EXT4-fs (mmcblk0p2): recovery complete
[6.13] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O
pts: (null)
[6.135000] VFS: Mounted root (ext4 filesystem) on device 179:2.
[6.145000] Freeing init memory: 232K
[6.145000] init_post
[6.16] kernel_execve ret = 0
[6.165000] kernel_execve filename = /sbin/init
[6.265000] kernel_execve ret = 0
[6.27] kernel_execve filename = /sbin/modprobe
[6.31] kernel_execve ret = 0
[6.31] kernel_execve filename = /sbin/modprobe
[6.93] CPU3: shutdown
[7.435000] CPU2: shutdown
[7.845000] CPU1: shutdown

Thanks for your help!

Best Regards,

kong ling

> From: ivi-requ...@lists.tizen.org<mailto:ivi-requ...@lists.tizen.org>
> Subject: IVI Digest, Vol 28, Issue 53
> To: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
> Date: Thu, 26 Jun 2014 15:26:22 +
>
> Send IVI mailing list submissions to
> ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.tizen.org/listinfo/ivi
> or, via email, send a message with subject or body 'help' to
> ivi-requ...@lists.tizen.org<mailto:ivi-requ...@lists.tizen.org>
>
> You can reach the person managing the list at
> ivi-ow...@lists.tizen.org<mailto:ivi-ow...@lists.tizen.org>
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of IVI digest..."
>
>
> Today's Topics:
>
> 1. Re: Can not Boot Tizen Common on Exynos4412 (Dominig ar Foll)
> 2. Re: Can not Boot Tizen Common on Exynos4412 (Philippe Coval)
> 3. RE: Can not Boot Tizen Common on Exynos4412 (VanCutsem, Geoffroy)
>
>
> --
>
> Message: 1
> Date: Thu, 26 Jun 2014 16:14:08 +0200
> From: Dominig ar Foll 
> mailto:dominig.arf...@fridu.net>>
> To: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
> Subject: Re: Can not Boot Tizen Common on Exynos4412
> Message-ID: <53ac2ab0.10...@fridu.net<mailto:53ac2ab0.10...@fridu.net>>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hello,
>
> I doubt that your kernel support Smacks security label.
> Upgrade your kernel first and check that you have enable Smacks.
>
> Dominig
>
> Le 25/06/2014 07:25, kongling a ?crit :
> > Hi,
> >
> > My platform is called "iTOP-4412" that is made in china.
> >
> > I have 3.5 kernel and it can boot with ubuntu file-system. But the
> > Tizen common still get stuck in "Freeing init memory:xxx K".
> >
> > My bootargs is "root=/dev/mmcblk2

RE: Can not Boot Tizen Common on Exynos4412

[VanCutsem, Geoffroy]

A shot in the dark from me but here are the next few things you should check:

-  Make sure you have the driver for the MMC controller built-in (given 
you don’t use an initrd)

-  Double-check the device/partition name of the MMC card

-  Insert a ‘rootwait’ in your kernel command-line

-  Have you replaced the /sbin/init file on the Tizen filesystem by any 
chance?

Thanks,
Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Philippe Coval
Sent: Thursday, June 26, 2014 5:22 PM
To: Dominig ar Foll
Cc: ivi@lists.tizen.org
Subject: Re: Can not Boot Tizen Common on Exynos4412

It should boot without smack since you're on linux-3.5 you wont have it
I had it also disabled on tizen-sunxi (linux-3.4)
Even tizen's linux-3.10 branch for odroid
has smack disabled (seems smack is not the top priority yet)
I would suggest you to try the same config file you have on ubuntu and try again
Later

2014-06-26 16:14 GMT+02:00 Dominig ar Foll 
mailto:dominig.arf...@fridu.net>>:
Hello,

I doubt that your kernel support Smacks security label.
Upgrade your kernel first and check that you have enable Smacks.

Dominig
Le 25/06/2014 07:25, kongling a écrit :
Hi,

My platform is called "iTOP-4412" that is made in china.

I have 3.5 kernel and it can boot with ubuntu file-system. But the Tizen common 
still get stuck in "Freeing init memory:xxx K".

My bootargs is "root=/dev/mmcblk2 rw rootfstype=ext4 console=ttySAC2,115200 
noinitrd init=/sbin/init".

Could you help me?

Best Regards,

kong ling

Date: Fri, 20 Jun 2014 10:05:07 +0200
Subject: Re: Can not Boot Tizen Common on Exynos4412
From: www.rzr.online...@gmail.com
To: k870818...@outlook.com
CC: ivi@lists.tizen.org
Hi


What is your exynos4412 platform ?
make sure it's exynos4412-trats2 (rdpd?)

common-arm-09.06.2014.tar.lzma (uses exynos4412-trats2.dtb KVERS=3.10.39+)


for odroid u3 you need to rebuild kernel and join device tree file to zImage on 
the 1st part

it will boot with default bootloader
but I dont have a working .config file to share yet


hope it helps


On Fri, Jun 20, 2014 at 9:48 AM, kongling 
mailto:k870818...@outlook.com>> wrote:
Hi,

I'm trying to run the file-system in [common-arm-09.06.2014.tar.lzma 
(https://wiki.tizen.org/wiki/ARM#SUNXI_.28AllWinner.29)] with Exynos4412.

The kernel version is 3.0.15 and i think it got stuck in [sbin/init].

[3.525490] Freeing init memory: 212K
[3.530498] Failed to execute /linuxrc.  Attempting defaults...
[   62.558748] failed to copy MFC F/W during init
[   65.542356] CPU1: shutdown

Is this kernel's version too low to run the file-system?

Best Regards,

kong ling

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi



--
Related Obsession : http://rzr.online.fr/q/harmattan


___

IVI mailing list

IVI@lists.tizen.org

https://lists.tizen.org/listinfo/ivi


--

Dominig ar Foll

Senior Software Architect

Intel Open Source Technology Centre

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Wifi with Intel Centrino 6235 with Tizen IVI on NDIS166

[VanCutsem, Geoffroy]

I’ll have to get back to that system to test this out, based on the kernel 
version it looks like you’re running 
https://wiki.tizen.org/wiki/IVI/IVI_January_15,_3.0-M2-EOY, I don’t recall any 
particular issue for that combination.

At the risk of making a fool of myself, make sure that the antennae you use are 
appropriate for the connectors at the back, I have spent a couple of days not 
so long ago trying to figure out why my wifi wouldn’t pick up the WiFi networks 
around me just to realize I had used a female antenna on a female connector… so 
there was no physical connection although I could just as easily screw it onto 
the platform ☺.

Geoffroy

From: Rudolf Streif [mailto:rstr...@linuxfoundation.org]
Sent: Monday, June 16, 2014 4:43 PM
To: VanCutsem, Geoffroy
Cc: ivi@lists.tizen.org
Subject: Re: Wifi with Intel Centrino 6235 with Tizen IVI on NDIS166

Thank, Geoffroy. I checked that. My NDIS-166 has two antennae and both main and 
aux are connected internally and I of course also attached the two antennas. It 
is rather weird.

On Mon, Jun 16, 2014 at 1:26 AM, VanCutsem, Geoffroy 
mailto:geoffroy.vancut...@intel.com>> wrote:
Hi Rudi,

The first thing I’d check is whether you have an antenna connected. Some 
earlier versions of the NDiS-166 only had one antenna connector at the back and 
you could therefore only have either BT or WiFi. It’s that’s the case, try to 
open up the box and change the antenna to the other connector on the 6235 AGN 
card for a quick verification that WiFi is functioning correctly.

Cheers,
Geoffroy

From: IVI 
[mailto:ivi-boun...@lists.tizen.org<mailto:ivi-boun...@lists.tizen.org>] On 
Behalf Of Rudolf Streif
Sent: Monday, June 16, 2014 7:10 AM
To: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: Wifi with Intel Centrino 6235 with Tizen IVI on NDIS166

I have Tizen IVI (don't exactly know what build but kernel 3.12.4-10.1) on 
NDIS166 that has an Intel Centrino 6235 AGN with BT card installed.

BT works fine but Wifi does not.

Diagnostics:

  *   iwlwifi and iwldvn modules are loaded.
  *   The firmware seems to be the correct version: iwlwifi-6000g2b-6.mode.
  *   ifconfig shows the device as wlan0.
  *   rfkill list shows
0: hci0: Bluetooth
Soft blocked:no
Hard blocked: no
3: phy2: Wireless LAN
Soft blocked:no
Hard blocked: no
  *   connmanctl technologies
/net/connman/technologies/wifi
   Name = WIFI
   Type = wifi
   Powered = True
   Connected = False
   Tethering = False
   Hidden = False

However, when I scan for wifi networks the scanning finishes almost immediately 
with "Scan completed for wifi" with no networks found (although there are a 
couple of them around).

Any hints would be appreciated.

Thanks,
Rudi

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.




Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Wifi with Intel Centrino 6235 with Tizen IVI on NDIS166

[VanCutsem, Geoffroy]

Hi Rudi,

The first thing I’d check is whether you have an antenna connected. Some 
earlier versions of the NDiS-166 only had one antenna connector at the back and 
you could therefore only have either BT or WiFi. It’s that’s the case, try to 
open up the box and change the antenna to the other connector on the 6235 AGN 
card for a quick verification that WiFi is functioning correctly.

Cheers,
Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Rudolf Streif
Sent: Monday, June 16, 2014 7:10 AM
To: ivi@lists.tizen.org
Subject: Wifi with Intel Centrino 6235 with Tizen IVI on NDIS166

I have Tizen IVI (don't exactly know what build but kernel 3.12.4-10.1) on 
NDIS166 that has an Intel Centrino 6235 AGN with BT card installed.

BT works fine but Wifi does not.

Diagnostics:

  *   iwlwifi and iwldvn modules are loaded.
  *   The firmware seems to be the correct version: iwlwifi-6000g2b-6.mode.
  *   ifconfig shows the device as wlan0.
  *   rfkill list shows
0: hci0: Bluetooth
Soft blocked:no
Hard blocked: no
3: phy2: Wireless LAN
Soft blocked:no
Hard blocked: no
  *   connmanctl technologies
/net/connman/technologies/wifi
   Name = WIFI
   Type = wifi
   Powered = True
   Connected = False
   Tethering = False
   Hidden = False

However, when I scan for wifi networks the scanning finishes almost immediately 
with "Scan completed for wifi" with no networks found (although there are a 
couple of them around).

Any hints would be appreciated.

Thanks,
Rudi
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: install wigit in for crosswalk.

[VanCutsem, Geoffroy]

Hi Art,

What version of Crosswalk have you installed? The error looks like this issue: 
https://crosswalk-project.org/jira/browse/XWALK-1112 (but was resolved some 
time ago). Make sure you follow Brian’s recommendation below too, i.e. run 
xwalkctl as ‘app’ and using the full path to the widget.

Cheers,
Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Jones, Brian J
Sent: Saturday, May 31, 2014 10:58 PM
To: McGee, Art; ivi@lists.tizen.org; d...@lists.tizen.org
Subject: RE: install wigit in for crosswalk.

If I recall correctly, you need to provide the full path to Browser.wgt.  Might 
not be the issue, but worth a shot.  Other things to keep in mind is that you 
must be calling xwalkctl as app, though I’m pretty sure it complains if you try 
as root.

From: McGee, Art [mailto:amcg...@jaguarlandrover.com]
Sent: Friday, May 30, 2014 3:40 PM
To: Jones, Brian J; ivi@lists.tizen.org; 
d...@lists.tizen.org
Subject: Re: install wigit in for crosswalk.

I've installed the package crosswalk on JAN 15 EOY with the zypper reference.  
I have been unable to install a wigit.

Command:  xwalkctl -i Browser.wgt

Response:  Service 'org.crosswalkproject.Runtime1' could not be reached:  Error 
colling StartServiceByName for org.crosswalkproject.Runtime1: Timeout was 
reached

I am running this from the console in the wayland gui.

Is there something I'm missing.


On 30 May 2014 14:26, Jones, Brian J 
mailto:brian.j.jo...@intel.com>> wrote:
>
> Art,
>
>
>
> Just a heads up that apps need to be launched using the full binary path.  
> xwalk-launcher won’t work with Modello apps, this is a known bug that 
> supposedly just got fixed.  So for now use xwalkctl to get a list of your 
> apps, then use 
> /home/app/.config/xwalk-service/applications//bin/xwalk-.
>
>
>
> Otherwise, some of the tizen web APIs will fail and all you’ll get is a black 
> screen.
>
>
>
> From: McGee, Art 
> [mailto:amcg...@jaguarlandrover.com]
> Sent: Friday, May 30, 2014 2:20 PM
> To: Jones, Brian J
> Cc: d...@lists.tizen.org; 
> ivi@lists.tizen.org
> Subject: Re: Installing crosswalk
>
>
>
> Thanks, Brian that worked.  Now I'll try launching some apps.
>
>
>
> On 30 May 2014 13:37, Jones, Brian J 
> mailto:brian.j.jo...@intel.com>> wrote:
>
> Oh and another option is to point your zypper repo to 
> http://download.tizen.org/snapshots/tizen/ivi/ivi/latest/repos/ivi/ia32/packages
>  .  You’ll then be able to zypper install crosswalk.
>
>
>
> From: IVI 
> [mailto:ivi-boun...@lists.tizen.org] On 
> Behalf Of Jones, Brian J
> Sent: Friday, May 30, 2014 1:28 PM
> To: McGee, Art; d...@lists.tizen.org; 
> ivi@lists.tizen.org
> Subject: RE: Installing crosswalk
>
>
>
> Hi Art,
>
>
>
> You can get it from https://crosswalk-project.org/#documentation/downloads in 
> rpm form, rather than building it yourself.  The current IVI images will have 
> it pre-installed.
>
>
>
>
>
> From: McGee, Art 
> [mailto:amcg...@jaguarlandrover.com]
> Sent: Friday, May 30, 2014 1:18 PM
> To: Jones, Brian J; d...@lists.tizen.org; 
> ivi@lists.tizen.org
> Subject: Installing crosswalk
>
>
>
> I've been working on installing crosswalk on an NDIS166.  I'm using gbs to 
> build the package on Ubuntu 12.04.  It is taking quite some time currently 
> running the script that came from the cloned repository.  It seems stuck
>
>
>
> [1:06:43] Still working on:
>
> [1:06:43]   src
>
>
>
> I'm currently letting it run.  I'm Running Jan15th EOY release of Tizen IVI.  
> Is there a binary rpm I can use to install on this platform.  I've tried 
> using zypper but I don't know what package that might be in zypper.
>
>
>
> Thanks in advance for all your assistance.  I really want to start moving our 
> projects to crosswalk.
>
>
>
> --
>
> Art McGee
>
> Infotainment Engineer
>
> Jaguar Land Rover
>
> One World Trade Center, 121 Southwest Salmon Street, 11th Floor, Portland, 
> Oregon, 97204
>
>
>
>
>
>
>
> --
>
> Art McGee
>
> Infotainment Engineer
>
> Jaguar Land Rover
>
> One World Trade Center, 121 Southwest Salmon Street, 11th Floor, Portland, 
> Oregon, 97204
>
>




--
Art McGee
Infotainment Engineer
Jaguar Land Rover
One World Trade Center, 121 Southwest Salmon Street, 11th Floor, Portland, 
Oregon, 97204
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.

RE: [TizenIVI 3.0]Audio Record

[VanCutsem, Geoffroy]

There is no GUI app that does that (that I'm aware of) but you can look at 
parecord (command-line) to play with this (works on PulseAudio, which I'd 
recommend over going straight to ALSA). You could also examine its source code.

Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Yang Andy
Sent: Friday, May 30, 2014 9:05 AM
To: ivi@lists.tizen.org
Subject: [TizenIVI 3.0]Audio Record






Hello everyone

I want to implement audio record based on ALSA architecture.

My question:is there a software component which have implemented  audio record 
in tizen ivi?

Thank you.

Andy
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: [Tizen IVI 3.0] Shared folder in VMWARE

[VanCutsem, Geoffroy]

Hi Orti,

I have never tried really hard but my understanding is that we’d need the 
VMware Tools to be installed in the guest OS (ie. Tizen IVI) and more 
specifically the vmhgfs module in order to mount that shared folder in any 
Linux guest OS. I have tried that once (quite some time ago) and it did not 
work straight away, I did not investigate any further.

I have been using ‘scp’ to transfer files between my VM and my host OS (or any 
other computer). I typically set-up the network in ‘bridge’ mode instead of the 
default ‘NAT’ mode.

Cheers,
Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Orti Senderos
Sent: Wednesday, May 28, 2014 5:58 PM
To: ivi@lists.tizen.org
Subject: [Tizen IVI 3.0] Shared folder in VMWARE

Hello,

I have install the last release of the Tizen IVI on the VMWARE running on 
Ubuntu, and I have share a folder. Where is that folder on Tizen?
Does anyone solve this problem?
Thanks in advance.
Orti
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: automotive-message-broker do not start

[VanCutsem, Geoffroy]

Hi Joachim,

I haven't tried myself but here are a couple of things you could check:

-  Check the path where the lib was installed, if it is /usr/local/lib 
(I _think_ it's the default), then you should export 
LD_LIBRARY_PATH="/usr/local/lib" before calling ambd

-  Maybe try to also run 'sudo ldconfig'

Hope this helps,
Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of joachim rodrigues
Sent: Monday, May 26, 2014 10:11 PM
To: ivi@lists.tizen.org
Subject: automotive-message-broker do not start

Hi, I've just successfully installed  automotive-message-broker.
At least i did not have errors.
I followed steps described :
https://github.com/otcshare/automotive-message-broker

ie :

cd automotive-message-broker

mkdir build

cd build

cmake ..

make



To install:



sudo make install


Then when i try to start  :
ambd

I'm getting :
ambd: error while loading shared libraries: libamb.so.0.10.902: cannot open 
shared object file: No such file or directory

I'm ruunig on xubuntu  12.10

Thanks in advance

Joachim

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Bluetooth power on error

[VanCutsem, Geoffroy]

Just to follow up on that, it turned out Mariem was working on the Tizen IVI 
emulator and that does not support Bluetooth (unless I've totally missed it 
myself too).

Geoffroy

From: Jones, Brian J
Sent: Thursday, May 22, 2014 7:34 PM
To: VanCutsem, Geoffroy; Mariem Mhiri; ivi@lists.tizen.org
Subject: RE: Bluetooth power on error

Check hciconfig first.  If it says 'down', which it probably does, use 
hciconfig hci0 up to get it going.  After that , power on should work for you.

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of VanCutsem, Geoffroy
Sent: Thursday, May 22, 2014 3:59 AM
To: Mariem Mhiri; ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: RE: Bluetooth power on error

What's your hardware platform? What does the 'list' command show?

The first thing I'd check is what BT adapter you have and whether it's started 
correctly ('journalctl -b' output would also be useful here).

Geofffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Mariem Mhiri
Sent: Thursday, May 22, 2014 12:42 PM
To: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: Bluetooth power on error

Hello,

I am developing an application in which will be a data exchange using 
bluetooth. So I installed bluez on Tizen IVI using this command "zypper install 
bluez-test" . To power on the bluetooth I do the flowing:
#bluetoothclt
#power on

but when I try to power on the bluetooth I get this error: no default 
controller available.
Does any one have any idea what should I do to correct this error?

Best regards,
Mariem


Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: RE: Problem with default ac domain package

[VanCutsem, Geoffroy]

It sounds like I may be the source of your problems then ;-)

Let me summarize what I think you’re trying to do: rebuild locally a package 
(ico-uxf-homescreen) using a local repo that you are creating yourself by 
downloading all dependencies for that package. Is this correct?

If so, you’d need to modify your gbs.conf to point at the local repo and make 
sure that that local repo contains *all* packages which are direct and indirect 
dependencies… that may be a tricky exercise.

Thanks,
Geoffroy

From: karthikkarthik...@yahoo.in [mailto:karthikkarthik...@yahoo.in]
Sent: Wednesday, May 21, 2014 7:40 PM
To: VanCutsem, Geoffroy; José Bollo
Cc: ivi@lists tizen. org
Subject: Re: RE: Problem with default ac domain package


Thanks Geoffroy,

I am trying to build the package locally by downloading the individual rpm 
required. The rpm folder seems to continue to older versions of the packages.

Indeed, the gbs.conf file I am using was passed on to me by you..

Thanks.



From: VanCutsem, Geoffroy 
mailto:geoffroy.vancut...@intel.com>>;
To: José Bollo 
mailto:jose.bo...@open.eurogiciel.org>>; 
karthik karthik mailto:karthikkarthik...@yahoo.in>>;
Cc: ivi@lists tizen. org mailto:ivi@lists.tizen.org>>;
Subject: RE: Problem with default ac domain package
Sent: Wed, May 21, 2014 12:36:55 PM

Based on the package versions being installed, it looks like you're trying to 
build this for an image that's older than the 3.0-M1 (from July 2013!)... I 
strongly suspect at this point that there is something not configured properly 
in your gbs.conf file. You may want to take a look here to see how to set your 
gbs.conf to build for various Tizen IVI 3.0-Mx milestones: 
https://wiki.tizen.org/wiki/IVI/GBS_configuration_files_Tizen_IVI


> -Original Message-
> From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf 
> Of VanCutsem,
> Geoffroy
> Sent: Wednesday, May 21, 2014 2:22 PM
> To: José Bollo; karthik karthik
> Cc: ivi@lists tizen. org
> Subject: RE: Problem with default ac domain package
>
> Can you share your gbs.conf file with us?
>
> Something that may help is to clean the buildroot, i.e. 'gbs lb -A i586 -C'
>
> > -Original Message-
> > From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf 
> > Of José Bollo
> > Sent: Wednesday, May 21, 2014 2:10 PM
> > To: karthik karthik
> > Cc: ivi@lists tizen. org
> > Subject: Re: Problem with default ac domain package
> >
> > My suse is using kernel 3.7 and it works well on it.
> >
> > The problem is more probably coming from the toolchain
> >
> > best regards
> > josé
> >
> > On mer, 2014-05-21 at 19:58 +0800, karthik karthik wrote:
> > > Hi,
> > >
> > > Is it the version of linux I am using is the problem you are
> > > referring to.
> > >
> > > I am using ubuntu 12.04 with kernel 3.8.0-29. (to do the build)
> > >
> > > Is the solution, upgrading of linux kernel like moving to higher
> > > version of ubuntu ??
> > >
> > > Thanks
> > >
> > >
> > >
> > >
> > >
> > >
> >
> __
> > 
> > > From: José Bollo >;
> > > To: karthikkarthik...@yahoo.in 
> > > >;
> > > Cc: ivi@lists tizen. org 
> > > >;
> > > Subject: Re: Problem with default ac domain package
> > > Sent: Wed, May 21, 2014 11:23:57 AM
> > >
> > >
> > > Looking in it deeper let see that your tools (kernel, rpm) are
> > > enough old too not have the l (locking) of Smack.
> > >
> > > best regards
> > > José
> > >
> > > On mer, 2014-05-21 at 18:12 +0800, 
> > > karthikkarthik...@yahoo.in wrote:
> > > > Hi,
> > > >
> > > > I am trying to build the package ico-uxf-homescreen (doing a local
> > > > build). While installing the package, I am facing the following
> > > > problem
> > > >
> > > > [ 6s] [1/380] installing boost-license-1.51.0-11.1 [ 6s] [2/380]
> > > > installing capi-base-common-0.1.0-2.1 [ 6s] [3/380] installing
> > > > default-ac-domains-0.1-1.
> > > >
> > > > [ 6s] error: Not allowed character in access type: l
> > > >
> > > > [ 6s] error: Failed to parse manifest for default-ac-domains
> > > >
> > > > [ 6s] error: default-ac-domains-0.1-1.3.noarch: install failed [
> > > > 6s] exit ...
> > > >
> > > > I checked the manifest file in default-ac-domains packages..
> > > >
>

RE: Bluetooth power on error

[VanCutsem, Geoffroy]

What's your hardware platform? What does the 'list' command show?

The first thing I'd check is what BT adapter you have and whether it's started 
correctly ('journalctl -b' output would also be useful here).

Geofffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Mariem Mhiri
Sent: Thursday, May 22, 2014 12:42 PM
To: ivi@lists.tizen.org
Subject: Bluetooth power on error

Hello,

I am developing an application in which will be a data exchange using 
bluetooth. So I installed bluez on Tizen IVI using this command "zypper install 
bluez-test" . To power on the bluetooth I do the flowing:
#bluetoothclt
#power on

but when I try to power on the bluetooth I get this error: no default 
controller available.
Does any one have any idea what should I do to correct this error?

Best regards,
Mariem

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: [Tizen IVI 3.0] Compile Opencv with Qt

[VanCutsem, Geoffroy]

Hi Mikko,

(sorry for top-posting)

Is there any interdependency between the two options (it does not look like it 
at first glance)?

Thanks,
Geoffroy

From: Ylinen, Mikko [mailto:mikko.yli...@intel.com]
Sent: Thursday, May 22, 2014 11:55 AM
To: VanCutsem, Geoffroy
Cc: Rees, Kevron M; Philippe Coval; ivi@lists.tizen.org
Subject: Re: [Tizen IVI 3.0] Compile Opencv with Qt



On Wed, May 21, 2014 at 4:32 PM, VanCutsem, Geoffroy 
mailto:geoffroy.vancut...@intel.com>> wrote:
+1 on enabling the Qt-OpenCV bits.


Just be aware of https://review.tizen.org/gerrit/#/c/20121/

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: [Tizen IVI 3.0] Compile Opencv with Qt

[VanCutsem, Geoffroy]

+1 on enabling the Qt-OpenCV bits.

> -Original Message-
> From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Rees, Kevron
> Sent: Thursday, May 15, 2014 6:40 PM
> To: Philippe Coval
> Cc: ivi@lists.tizen.org
> Subject: Re: [Tizen IVI 3.0] Compile Opencv with Qt
> 
> Any update on this?  I just pushed the new version of opencv 2.4.9 to
> IVI.  I wonder if I should enable the Qt-opencv bits.
> 
> -Kevron
> 
> On Mon, May 12, 2014 at 5:38 AM, Philippe Coval
>  wrote:
> > On 05/12/2014 01:01 PM, Tomasz Olszak wrote:
> >>
> >> 2014-05-12 10:53 GMT+02:00 Orti Senderos
> :
> >>>
> >>> Hello,
> >>>
> >>> Thanks for your help. Now I can show the window with the image using
> >>> opencv
> >>> with Qt. But it is not stable for me. I can show it twice out of 5
> >>> attempts.
> >>> The other 3 times the terminal gets block.  I get this two warnings every
> >>> time, even when the image is shown.
> >>>
> >>> This plugin does not support propagatesizehints()
> >
> > [...]
> >
> >>> Yes,
> >>> On latest IVI images Qt applications, especially widget based, are not
> >>> stable (weston crashes). I know that guys from Tizen:Common used
> >>> wayland without any issues. Is weston in IVI very different from the
> >>> one in Common?
> >>>
> > Hi,
> >
> > Well I've been playing with qtwayland lately on Tizen:Common
> >
> > and I can say qt is there but I am not that sure it's fully supported
> >
> > ie, try to install  qt5-qttools-qtdesigner
> > /usr/lib64/qt5/bin/designer
> > hit menu/ Quit
> > weston crashes ...
> >
> > At least this happened to me last week
> >
> > On the otherside qtquick/qml seems ok even with xdg support
> > as reported there :
> > https://www.youtube.com/watch?v=pY_XXvKc_0E
> >
> > For now I am focusing on how to get latest qt integrated
> > in Tizen:Common image
> >
> > and maybe will raise some bugs and produce some traces
> >
> > Regards and see you online #qt-tizen if needed
> >
> > --
> >  mailto:philippe.co...@eurogiciel.fr  --  gpg:0x467094BC
> >  xmpp:philippe.coval@gmail.com
> >  https://dockr.eurogiciel.fr/blogs/embedded/author/pcl/
> >
> >.
> >
> > ___
> > IVI mailing list
> > IVI@lists.tizen.org
> > https://lists.tizen.org/listinfo/ivi
> ___
> IVI mailing list
> IVI@lists.tizen.org
> https://lists.tizen.org/listinfo/ivi
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Problem with default ac domain package

[VanCutsem, Geoffroy]

Based on the package versions being installed, it looks like you're trying to 
build this for an image that's older than the 3.0-M1 (from July 2013!)... I 
strongly suspect at this point that there is something not configured properly 
in your gbs.conf file. You may want to take a look here to see how to set your 
gbs.conf to build for various Tizen IVI 3.0-Mx milestones: 
https://wiki.tizen.org/wiki/IVI/GBS_configuration_files_Tizen_IVI


> -Original Message-
> From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of VanCutsem,
> Geoffroy
> Sent: Wednesday, May 21, 2014 2:22 PM
> To: José Bollo; karthik karthik
> Cc: ivi@lists tizen. org
> Subject: RE: Problem with default ac domain package
> 
> Can you share your gbs.conf file with us?
> 
> Something that may help is to clean the buildroot, i.e. 'gbs lb -A i586 -C'
> 
> > -Original Message-
> > From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of José Bollo
> > Sent: Wednesday, May 21, 2014 2:10 PM
> > To: karthik karthik
> > Cc: ivi@lists tizen. org
> > Subject: Re: Problem with default ac domain package
> >
> > My suse is using kernel 3.7 and it works well on it.
> >
> > The problem is more probably coming from the toolchain
> >
> > best regards
> > josé
> >
> > On mer, 2014-05-21 at 19:58 +0800, karthik karthik wrote:
> > > Hi,
> > >
> > > Is it the version of linux I am using is the problem you are
> > > referring to.
> > >
> > > I am using ubuntu 12.04 with kernel 3.8.0-29. (to do the build)
> > >
> > > Is the solution, upgrading of linux kernel like moving to higher
> > > version of ubuntu ??
> > >
> > > Thanks
> > >
> > >
> > >
> > >
> > >
> > >
> >
> __
> > 
> > > From: José Bollo ;
> > > To: karthikkarthik...@yahoo.in ;
> > > Cc: ivi@lists tizen. org ;
> > > Subject: Re: Problem with default ac domain package
> > > Sent: Wed, May 21, 2014 11:23:57 AM
> > >
> > >
> > > Looking in it deeper let see that your tools (kernel, rpm) are
> > > enough old too not have the l (locking) of Smack.
> > >
> > > best regards
> > > José
> > >
> > > On mer, 2014-05-21 at 18:12 +0800, karthikkarthik...@yahoo.in wrote:
> > > > Hi,
> > > >
> > > > I am trying to build the package ico-uxf-homescreen (doing a local
> > > > build). While installing the package, I am facing the following
> > > > problem
> > > >
> > > > [ 6s] [1/380] installing boost-license-1.51.0-11.1 [ 6s] [2/380]
> > > > installing capi-base-common-0.1.0-2.1 [ 6s] [3/380] installing
> > > > default-ac-domains-0.1-1.
> > > >
> > > > [ 6s] error: Not allowed character in access type: l
> > > >
> > > > [ 6s] error: Failed to parse manifest for default-ac-domains
> > > >
> > > > [ 6s] error: default-ac-domains-0.1-1.3.noarch: install failed [
> > > > 6s] exit ...
> > > >
> > > > I checked the manifest file in default-ac-domains packages..
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > //Line with the type as “l”
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > There is a line with type as "l".
> > > >
> > > > How to solve this problem ??
> > > >
> > > > Thanks
> > >
> > > >
> > > >
> > > > ___
> > > > IVI mailing list
> > > > IVI@lists.tizen.org
> > > > https://lists.tizen.org/listinfo/ivi
> > >
> > >
> > >
> > >
> >
> >
> > ___
> > IVI mailing list
> > IVI@lists.tizen.org
> > https://lists.tizen.org/listinfo/ivi
> Intel Corporation NV/SA
> Kings Square, Veldkant 31
> 2550 Kontich
> RPM (Bruxelles) 0415.497.718.
> Citibank, Brussels, account 570/1031255/09
> 
> This e-mail and any attachments may contain confidential material for the
> sole use of the intended recipient(s). Any review or distribution by others is
> strictly prohibited. If you are not the intended recipient, please contact the
> sender and delete all copies.
> ___
> IVI mailing list
> IVI@lists.tizen.org
> https://lists.tizen.org/listinfo/ivi
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Problem with default ac domain package

[VanCutsem, Geoffroy]

Can you share your gbs.conf file with us?

Something that may help is to clean the buildroot, i.e. 'gbs lb -A i586 -C'

> -Original Message-
> From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of José Bollo
> Sent: Wednesday, May 21, 2014 2:10 PM
> To: karthik karthik
> Cc: ivi@lists tizen. org
> Subject: Re: Problem with default ac domain package
> 
> My suse is using kernel 3.7 and it works well on it.
> 
> The problem is more probably coming from the toolchain
> 
> best regards
> josé
> 
> On mer, 2014-05-21 at 19:58 +0800, karthik karthik wrote:
> > Hi,
> >
> > Is it the version of linux I am using is the problem you are referring
> > to.
> >
> > I am using ubuntu 12.04 with kernel 3.8.0-29. (to do the build)
> >
> > Is the solution, upgrading of linux kernel like moving to higher
> > version of ubuntu ??
> >
> > Thanks
> >
> >
> >
> >
> >
> >
> __
> 
> > From: José Bollo ;
> > To: karthikkarthik...@yahoo.in ;
> > Cc: ivi@lists tizen. org ;
> > Subject: Re: Problem with default ac domain package
> > Sent: Wed, May 21, 2014 11:23:57 AM
> >
> >
> > Looking in it deeper let see that your tools (kernel, rpm) are enough
> > old too not have the l (locking) of Smack.
> >
> > best regards
> > José
> >
> > On mer, 2014-05-21 at 18:12 +0800, karthikkarthik...@yahoo.in wrote:
> > > Hi,
> > >
> > > I am trying to build the package ico-uxf-homescreen (doing a local
> > > build). While installing the package, I am facing the following
> > > problem
> > >
> > > [ 6s] [1/380] installing boost-license-1.51.0-11.1 [ 6s] [2/380]
> > > installing capi-base-common-0.1.0-2.1 [ 6s] [3/380] installing
> > > default-ac-domains-0.1-1.
> > >
> > > [ 6s] error: Not allowed character in access type: l
> > >
> > > [ 6s] error: Failed to parse manifest for default-ac-domains
> > >
> > > [ 6s] error: default-ac-domains-0.1-1.3.noarch: install failed [ 6s]
> > > exit ...
> > >
> > > I checked the manifest file in default-ac-domains packages..
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > //Line with the type as “l”
> > >
> > >
> > >
> > >
> > >
> > > There is a line with type as "l".
> > >
> > > How to solve this problem ??
> > >
> > > Thanks
> >
> > >
> > >
> > > ___
> > > IVI mailing list
> > > IVI@lists.tizen.org
> > > https://lists.tizen.org/listinfo/ivi
> >
> >
> >
> >
> 
> 
> ___
> IVI mailing list
> IVI@lists.tizen.org
> https://lists.tizen.org/listinfo/ivi
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: [Tizen IVI 3.0] Text editor

[VanCutsem, Geoffroy]

Hi Orti,

I’m personally using ‘vim’, not the most intuitive one but at least it’s 
readily available. There is no Graphical text editor as far as I know and I 
don’t know how easily it would be to add it yourself (both geany and gedit 
would require the gnome libraries which are not available in Tizen IVI).

Thanks,
Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Orti Senderos
Sent: Tuesday, May 20, 2014 3:04 PM
To: ivi@lists.tizen.org
Subject: [Tizen IVI 3.0] Text editor

Hello,
Does someone know if there is a text editor similar to "geany" or "gedit" for 
Tizen IVI?

I am using the last new milestone preview: 
https://wiki.tizen.org/wiki/IVI/Tizen-IVI_3.0-M2-March2014.
Thanks in advance,
Orti Senderos
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: [TizenIVI 3.0]MP3 can not play

[VanCutsem, Geoffroy]

Hi Andy,

It sounds like you've added the MAD library to your system but what you need is 
the Gstreamer MAD plugin. That file would be called libgstmad.so (or something 
like that) and be located in /usr/lib/gstreamer-1.0/.

Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Yang Andy
Sent: Monday, May 19, 2014 10:12 AM
To: ivi@lists.tizen.org
Subject: RE: [TizenIVI 3.0]MP3 can not play

Hello everyone


> Easier would be to either use an earlier version of Tizen with gstreamer 
> v0.10 or acquire libmad MP3 library  and add it  yourself.

I have added libmad.so.0.2.1 to the tizen ivi system,but it does not work.

Is there anyting setup necessary? Or is there guideline wiki for this issue?

[Error Information]
18:36:10 ivi_box WebProcess[378]: gboolean 
WebCore::MediaPlayerPrivateGStreamer::handleMessage(GstMessage*)(1076) > ERROR: 
GST_MESSAGE_ERROR 12: Your GStreamer installation is missing a plug-in. 
(url=file:///opt/usr/media/Sounds/221mp3.mp3)

Thank you.

Andy

From: joel.cl...@intel.com
To: williamyan...@hotmail.com
CC: ivi@lists.tizen.org; 
ning.w.w...@intel.com; 
kevron.m.r...@intel.com
Subject: RE: [TizenIVI 3.0]MP3 can not play
Date: Wed, 14 May 2014 09:14:30 +
Rolling back the latest Tizen IVI to gstreamer v0.10 is probably hardest.  
Easier would be to either use an earlier version of Tizen with gstreamer v0.10 
or acquire libmad MP3 library  and add it  yourself.

Regards
Joel


From: Yang Andy [mailto:williamyan...@hotmail.com]
Sent: Wednesday, May 14, 2014 12:47 AM
To: Clark, Joel
Cc: ivi@lists.tizen.org; Wang, Ning W; Rees, Kevron 
M
Subject: RE: [TizenIVI 3.0]MP3 can not play

To:Joel

I want to play mp3 file on the lastest tizen ivi software.

As to gstreamer,is there possibility that fixed this problem if i rollback to 
gstreamer v0.10 on the lastest tizen ivi software?

Could you give some advice no how  solve the mp3 decode problem?

Thank you.

Andy
> From: joel.cl...@intel.com
> To: kevron.m.r...@intel.com; 
> ning.w.w...@intel.com
> CC: williamyan...@hotmail.com; 
> ivi@lists.tizen.org
> Subject: RE: [TizenIVI 3.0]MP3 can not play
> Date: Mon, 12 May 2014 16:20:02 +
>
> This reflects the move to a more recent upstream version of gstreamer. MP3 
> was working with gstreamer v0.10, but is not working with gstreamer 1.x. 
> Nobody has contributed a freely redistributable MP3 decoder for gstreamer 1.x.
>
> Regards
> Joel
>
>
> -Original Message-
> From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Rees, Kevron
> Sent: Monday, May 12, 2014 9:07 AM
> To: Wang, Ning W
> Cc: Yang Andy; ivi@lists.tizen.org
> Subject: Re: [TizenIVI 3.0]MP3 can not play
>
> I don't think we have any gstreamer plugins that support the MP3 codec. IIRC, 
> the MAD plugin is not enabled.
>
> On Mon, May 12, 2014 at 1:33 AM, Wang, Ning W 
> mailto:ning.w.w...@intel.com>> wrote:
> > Hi Andy,
> >
> > Andy,
> >
> >
> >
> > Do you by any chance run into the issue where the sound card is muted?
> > See
> > https://bugs.tizen.org/jira/browse/TIVI-2799 .
> >
> > You can work around it by running "pacmd set-sink-mute 0 false" in
> > weston terminal.
> >
> >
> >
> > Thanks,
> >
> > Ning
> >
> > From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Yang Andy
> > Sent: Monday, May 12, 2014 4:10 PM
> > To: ivi@lists.tizen.org
> > Subject: [TizenIVI 3.0]MP3 can not play
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Hello everyone
> >
> > When i use below IVI version,i found that MP3(Audio) can not
> > play.MP4(Vedio) is OK.
> >
> > Old version ivi did not have this problem.
> >
> > Do anyone know the reason?
> >
> > [IVI version]
> > tizen_20140422.1_ivi-release-mbr-i586-sdb.raw.bz2
> >
> > Thank you.
> >
> > Andy
> >
> >
> > ___
> > IVI mailing list
> > IVI@lists.tizen.org
> > https://lists.tizen.org/listinfo/ivi
> >
> ___
> IVI mailing list
> IVI@lists.tizen.org
> https://lists.tizen.org/listinfo/ivi
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Bluetooth device connection problem on ivi

[VanCutsem, Geoffroy]

Hi Kongling,

Could you give us more details on your environment, i.e. what Tizen IVI image 
are you using, what phone are you pairing it with?

You may also want to check if it’s not something that’s been reported in our 
bug tracking system, a quick search gave me this one for example (may or may 
not be the same): https://bugs.tizen.org/jira/browse/TIVI-2837

Thanks,
Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of kongling
Sent: Monday, May 19, 2014 11:00 AM
To: ivi@lists.tizen.org
Subject: Bluetooth device connection problem on ivi

Hi,
I'm trying to connect mobile with the [settings] app,but always get a 
[unknown exception].
the ivi could discover the mobile. After i clicked the [pair] button,i got 
a [unknown exception] notice.
Is this app's problem or platform's problem?
※It can be connected using [bluetoothctl command line].

thanks,
kongling
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Ico homescreen application problem

[VanCutsem, Geoffroy]

Can you tell us which image you’re using and how you’ve installed the ICO 
HomeScreen? There is a zypper pattern you can use as there is more than one 
package needed, see 
https://wiki.tizen.org/wiki/IVI/Tizen-IVI_3.0-M2-March2014#Install_ICO_Homescreen.

The file that’s missing below (ivi-controller.so) is provided by the 
genivi-shell package which should be installed if you’re using the pattern.

Thanks,
Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of 
karthikkarthik...@yahoo.in
Sent: Thursday, May 15, 2014 1:39 PM
To: ivi@lists tizen. org
Subject: Ico homescreen application problem


Hi,

I am trying to install ICO Homescreen application on TIZEN.. I was able to 
install it but why I try to start Weston to launch ICO homescreen, the 
following errors crop up. I tried analyzing these errors.. But still could find 
a way out.. Can some one help me with these..

The errors are listed below..

1) [02:32:51.988] INF>ico_plugin_loader: Enter(module_init) 
(ico_plugin_loader.c:159) [02:32:51.988] INF>ico_plugin_loader: 
Load(path=/usr/lib/weston/ivi-controller.so entry=module_init) 
(ico_plugin_loader.c:95) [02:32:51.988] TRC>ico_plugin_loader: 
/usr/lib/weston/ivi-controller.so loading (ico_plugin_loader.c:108) 
[02:32:51.988] ERR>ico_plugin_loader: Load 
Error(/usr/lib/weston/ivi-controller.so error) (ico_plugin_loader.c:114)

a)

shows “No such file or directory”

2) [02:32:51.988] INF>ico_plugin_loader: 
Load(path=/usr/lib/weston/ico_window_mgr.so entry=module_init) 
(ico_plugin_loader.c:95) [02:32:51.988] TRC>ico_plugin_loader: 
/usr/lib/weston/ico_window_mgr.so loading (ico_plugin_loader.c:108) 
[02:32:51.993] ERR>ico_plugin_loader: Load 
Error(/usr/lib/weston/ico_window_mgr.so error) (ico_plugin_loader.c:114)

[02:32:51.993] INF>ico_plugin_loader: 
Load(path=/usr/lib/weston/ico_window_animation.so entry=module_init) 
(ico_plugin_loader.c:95) [02:32:51.993] TRC>ico_plugin_loader: 
/usr/lib/weston/ico_window_animation.so loading (ico_plugin_loader.c:108) 
[02:32:51.993] ERR>ico_plugin_loader: Load 
Error(/usr/lib/weston/ico_window_animation.so error) (ico_plugin_loader.c:114)

b)

ico_window_animation.so are not linked to the Weston libraries. Checked with 
ldd command.

[02:32:51.993] INF>ico_plugin_loader: 
Load(path=/usr/lib/weston/ico_input_mgr.so entry=module_init) 
(ico_plugin_loader.c:95) [02:32:51.993] TRC>ico_plugin_loader: 
/usr/lib/weston/ico_input_mgr.so loading (ico_plugin_loader.c:108) 
[02:32:51.993] ERR>ico_plugin_loader: Load 
Error(/usr/lib/weston/ico_input_mgr.so error) (ico_plugin_loader.c:114)

Thanks,


Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: ofono/pulseaudio/bluez5

[VanCutsem, Geoffroy]

Hi Zoltan,

It's great that you have found a solution (even if it's hackish) to meet your 
immediate demo needs. I would also like that we follow-up on this issue given, 
as pointed out by Jaska, it *ought* to work. Would you mind filing a bug for 
this so we can properly track this?

Thanks,
Geoffroy

> -Original Message-
> From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Uimonen, Jaska
> Sent: Thursday, May 15, 2014 8:39 AM
> To: Podolyak, Zoltan; Jones, Brian J
> Cc: ivi@lists.tizen.org
> Subject: RE: ofono/pulseaudio/bluez5
> 
> Hi Zoltan,
> 
> Why I'm little bit worried here is that, the functionality that you are
> describing should be already in Tizen IVI images without any modifications.
> 
> If you make a bluetooth call and connect (or have connected before) a usb
> headset, you call should be routed automatically. We are testing this almost
> every day... This is what pulseaudio-module-murphy-ivi and Murphy are
> there for.
> 
> br,
> Jaska
> 
> 
> From: IVI [ivi-boun...@lists.tizen.org] on behalf of Podolyak, Zoltan
> [zpodo...@jaguarlandrover.com]
> Sent: Thursday, May 15, 2014 3:16 AM
> To: Jones, Brian J
> Cc: ivi@lists.tizen.org
> Subject: Re: ofono/pulseaudio/bluez5
> 
> Hi guys,
> 
> I think I figured out a way to get the Bluetooth sound routed through my USB
> headphones, though it is somewhat "hacky." I guess it will do for a demo.
> 
> There seems to be a ton of pulseaudio settings that either work differently
> on other distros or just don't work consistently at all.
> 
> You can apparently set the default sink/source from the
> default.pa configuration file, but it will seemingly have 
> no
> effect on Tizen.
> 
> The solution provided here also does not seem to work:
> https://bbs.archlinux.org/viewtopic.php?id=164868
> 
> The only way I was able to make it work was by forcing the unloading of the
> built-in module. udev discovery is usually assigned module index 0 and the
> built-in audio index 1. So we add the following line to our
> default.pa:
> 
> unload-module 1
> 
> This will unload the module containing the built-in audio and bluetooth audio
> will now be routed through the next available alsa card, our USB headset.
> 
> We can probably add a complicated udev rule or something or we can just
> run a pulseaudio test app to try and figure out exactly what's going. Thanks
> for all your help!
> 
> Zoltan
> 
> 
> On Wed, May 14, 2014 at 9:49 AM, Podolyak, Zoltan
> mailto:zpodo...@jaguarlandrover.com>>
> wrote:
> Yes, this is true. It's definitely not started by initiating an audio session
> through Bluetooth. I then tried searching in the source itself for how it's
> being started and the only place I found is the area around this:
> 
> /webkit-
> efl/Source/WebCore/platform/audio/gstreamer/AudioFileReaderGStreamer
> .cpp
> 
> This will initiate a new DBUS session somewhere down deep that will
> presumably launch pulse. As far as I can tell though, this code is not
> manipulated by any part of the Bluez/ofono pair. Nor should it be.
> 
> Zoltan
> 
> 
> On Wed, May 14, 2014 at 9:38 AM, Jones, Brian J
> mailto:brian.j.jo...@intel.com>> wrote:
> On a quick side note, to my knowledge pulseaudio is never up at boot.  This is
> intentional as it helps speed up the boot time.  PulseAudio should however
> be launched when requested, I think there is an issue with it not being
> started for phone related tasks ATM.
> 
> From: IVI [mailto:ivi-boun...@lists.tizen.org boun...@lists.tizen.org>] On Behalf Of Podolyak, Zoltan
> Sent: Wednesday, May 14, 2014 9:16 AM
> To: ivi@lists.tizen.org
> Subject: Fwd: ofono/pulseaudio/bluez5
> 
> 
> Hello Jaska,
> 
> Thanks for your reply. I will try to be a bit more specific about what my
> problem is.
> 
> I'm using the Plantronics_Plantronics_C420 USB headset with microphone.
> I'm aware that there's no pre-amp on the NDiS. It actually took me quite a
> while to just get the system to use the headset for our Music Player app.
> What I ended up doing is setting these settings in my /etc/pulse/client.conf
> file.
> 
> default-sink = alsa_output.usb-Plantronics_Plantronics_C420-00-
> C420.analog-stereo
> default-source = alsa_input.usb-Plantronics_Plantronics_C420-00-
> C420.analog-mono
> 
> With this setting, our Music Player uses the USB headset.
> 
> I also verified the microphone with alsa tools such as aplay/arecord. This
> works fine.
> 
> I'm definitely using default.pa when loading through the
> service file. Here's what it looks like:
> 
> [Unit]
> Description=pulseaudio sound server
> 
> [Service]
> ExecStart=/usr/bin/su app -c
> "DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/5000/dbus/user_bus
> _socket /usr/bin/pulseaudio --start --log-target=syslog"
> Restart=always
> 
> [Install]
> WantedBy=multi-user.target
> 
> So it's being loaded exactly how it would be loaded by webkit.
> 
> My probl

RE: [Dev] network boot on VTC 1010

[VanCutsem, Geoffroy]

Hi Nicolas,

Your observation is correct. This is not possible to boot the VTC1010 using PXE.

Thanks,
Geoffroy

> -Original Message-
> From: Dev [mailto:dev-boun...@lists.tizen.org] On Behalf Of Nicolas Zingilé
> Sent: Monday, May 12, 2014 6:12 PM
> To: ivi@lists.tizen.org; d...@lists.tizen.org
> Subject: [Dev] network boot on VTC 1010
> 
> Hi all,
> 
> I would like to know if there is a way to boot the VTC 1010 device on Pxe ? it
> seems that the bios doesn't propose a network boot option on this target.
> 
> Regards ,
> 
> Nicolas Z.
> 
> --
> ---
> Nicolas Zingilé
> Intel OTC - Vannes FR
> 
> ___
> Dev mailing list
> d...@lists.tizen.org
> https://lists.tizen.org/listinfo/dev
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: ozone-wayland installation

[VanCutsem, Geoffroy]

Hi Qiang,

Could you please add some more details on the usage of .gbs.conf vs. .gbp.conf 
on the Tizen wiki (some background info on GBP would be useful too). The only 
reference I found on GBP on the Tizen wiki is from this page: 
https://source.tizen.org/documentation/reference/git-build-system/upstream-package.
 It is mentioned that the upstream branch and tag format should be put in a 
.gbp.conf file (whereas I'm used to putting this in .gbs.conf).

Thanks,
Geoffroy

From: Zhang, Qiang Z
Sent: Tuesday, April 15, 2014 4:36 AM
To: VanCutsem, Geoffroy; maximouton .
Cc: ivi@lists.tizen.org
Subject: RE: ozone-wayland installation

GBS depend on git-buildpackage(gbp) to create final tarball, and 
git-buildpackage also have its config file named .gbp.conf:

https://honk.sigxcpu.org/piki/projects/git-buildpackage/

Thanks
Qiang


From: VanCutsem, Geoffroy
Sent: Monday, April 14, 2014 4:17 PM
To: Zhang, Qiang Z; maximouton .
Cc: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: RE: ozone-wayland installation

Thanks Qiang for clarifying this.

What is gbp and how are .gbs.conf and .gbp.conf different?

Thanks,
Geoffroy

From: Zhang, Qiang Z
Sent: Monday, April 14, 2014 4:46 AM
To: VanCutsem, Geoffroy; maximouton .
Cc: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: RE: ozone-wayland installation

Hi Maximilien and Geoffroy,

No need to rename .gbp.conf as .gbs.conf, and .gbp.conf is for gbp used.

I have tried in my local machine, I found it's a little hack in 
packaging/rpm/gbp-flat-tree.sh, which hard code and depend on a src directory 
on top of ozone-wayland.
So, the following command works:
$ git clone https://github.com/01org/ozone-wayland.git src/ozone-wayland
$ cd src/ozone-wayland/
$ gbs build --packaging-dir=packaging/rpm -A i586

Thanks
Qiang


From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of VanCutsem, Geoffroy
Sent: Monday, April 14, 2014 12:38 AM
To: maximouton .
Cc: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: RE: ozone-wayland installation

Hi Maximilien,

I'm assuming you're trying to build the git repo that's here: 
https://github.com/01org/ozone-wayland

I've never tried myself (yet) but I've quickly looked at the code in there and 
noticed that there is a file called .gbp.conf [1] which seems related to the 
issue you're facing below. If I understand that file correctly, the idea is 
that it should be picked up by GBS automatically... but for that to happen it 
should be called '.gbs.conf' (instead of '.gbp.conf'). Can you rename it and 
try again (you will need to use '--include-all' if you don't commit this name 
change in your local git).

Let us know if that helps!

Cheers,
Geoffroy

[1] https://github.com/01org/ozone-wayland/blob/master/.gbp.conf


From: maximouton . [mailto:maximou...@gmail.com]
Sent: Sunday, April 13, 2014 5:37 PM
To: VanCutsem, Geoffroy
Cc: Tiago Vignatti; ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: Re: ozone-wayland installation

Right. gbs was pointing to the wrong URL. I didn't know where to change it.

But still there is a problem may be due to a misconfiguration:

gbs -c ~/.gbs.conf build -A i586 --packaging-dir packaging/rpm/ --include-all
info: generate repositories ...
info: build conf has been downloaded at:
  /var/tmp/netlab-gbs/tizen.conf
info: start building packages from: /home/netlab/Desktop/ozone-wayland (git)
2014-04-13 17:28 +0200
info: prepare sources...
info: start export source from: /home/netlab/Desktop/ozone-wayland ...
info: Creating (native) source archive chromium.tar from 
'0b393ca1c4c4074e20a110413cd4b6e4f15267e7'
removed '/var/tmp/.gbs_export_5KWF0s/chromium.tar'
Creating a new /var/tmp/.gbs_export_5KWF0s/chromium.tar from /home/netlab/src
tar: src: Cannot stat: No such file or directory
tar: Exiting with failure status due to previous errors
error: Couldn't run './gbp-flat-tree.sh': ./gbp-flat-tree.sh returned 2
error: Failed to export packaging files from git tree
info: retrieving repo metadata...
info: parsing package data...
info: building repo metadata ...
info: package dependency resolving ...
warning: no available packages to build.
info: *** Build Status Summary ***
=== the following packages failed to build because export source files to build 
environment failed (1) ===
chromium-35.0.1906.0-0

=== Total succeeded built packages: (0) ===
info: generated html format report:
 /home/netlab/GBS-ROOT/local/repos/tizen/i586/index.html
info: generated RPM packages can be found from local repo:
 /home/netlab/GBS-ROOT/local/repos/tizen/i586/RPMS
info: generated source RPM packages can be found from local repo:
 /home/netlab/GBS-ROOT/local/repos/tizen/i586/SRPMS
info: build logs can be found in:
 /home/netlab/GBS-ROOT/local/repos/tizen/i586/logs
info: build roots located in:
 /home/netlab/GBS-ROOT/local/BUILD-ROOTS/scratch.i

RE: [TizenIVI 3.0]Question about WebApplication Install on the wayland

[VanCutsem, Geoffroy]

HI Andy,

We changed that in the latest release (i.e. Tizen IVI 3.0-M2-March2014) so that 
you can install your app if it is signed with Partner privileges (lower 
privilege level than Platform).

If you're interested in the details, such tweak is done via the 
/usr/etc/ace/TizenPolicy.xml file. Here is what this file contains (in the 
latest preview image) 
https://review.tizen.org/git/?p=platform/framework/web/wrt-security.git;a=blob;f=ace/configuration/TizenPolicy.xml;h=dd02e58d5b89b29f9bba81894bba8c7950088b2f;hb=00c4acd2a3607f8b2e6884dc1b85f111b18ddef5

Thanks,
Geoffroy

From: Yang Andy [mailto:williamyan...@hotmail.com]
Sent: Tuesday, April 29, 2014 12:05 PM
To: VanCutsem, Geoffroy
Cc: ivi@lists.tizen.org; Hanchett, Paul
Subject: RE: [TizenIVI 3.0]Question about WebApplication Install on the wayland

To:Geoffroy

>- tizen.package API: 
>https://developer.tizen.org/dev-guide/2.2.1/org.tizen.web.device.apireference/tizen/package.html

I use above API to develop a web application.

But when i install the web application,i failed to install web applicaion 
because the privilege level is not match.

This privilege requires platform level signing key

Privilege level: platform
Privilege: http://tizen.org/privilege/packagemanager.install

How can i get the platform level? Could you give me some advice?

Thank you.

Andy

From: geoffroy.vancut...@intel.com<mailto:geoffroy.vancut...@intel.com>
To: phanc...@jaguarlandrover.com<mailto:phanc...@jaguarlandrover.com>; 
williamyan...@hotmail.com<mailto:williamyan...@hotmail.com>
CC: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: RE: [TizenIVI 3.0]Question about WebApplication Install on the wayland
Date: Mon, 28 Apr 2014 16:33:55 +
Hi Andy,

I would agree with Paul, it's best to use wrt-installer if you can to 
install/remove applications. If your application is written in HTML5/JS, there 
is Tizen Device API for that too:
- tizen.package API: 
https://developer.tizen.org/dev-guide/2.2.1/org.tizen.web.device.apireference/tizen/package.html

If you want an example on how such Web API is used, take a look here: 
https://review.tizen.org/git/?p=profile/ivi/Modello_Appmanager.git;a=tree;h=refs/heads/tizen;hb=refs/heads/tizen<https://review.tizen.org/git/?p=profile/ivi/Modello_Appmanager.git%3ba=tree%3bh=refs/heads/tizen%3bhb=refs/heads/tizen>

Thanks,
Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Hanchett, Paul
Sent: Monday, April 28, 2014 5:47 PM
To: Yang Andy
Cc: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: Re: [TizenIVI 3.0]Question about WebApplication Install on the wayland

Why not just spawn a call to wrt-installer?

Duplicating something the system already does, could lead to a fragile design 
and there's significant risk-- You may not have access to all of the relevant 
data structures (both knowledge and execution privilege), there's always the 
possibility that a bug in your code could kill the system, and worst you 
potentially have to play catch-up if the install process changes.

Just some thoughts...  :-)

Paul



Paul Hanchett
---
Infotainment Engineer
MSX on behalf of Jaguar Land Rover
One World Trade Center, 121 Southwest Salmon Street, 11th Floor, Portland, 
Oregon, 97204

Email: phanc...@jaguarlandrover.com<mailto:phanc...@jaguarlandrover.com>
---

Business Details:
Jaguar Land Rover Limited
Registered Office: Abbey Road, Whitley, Coventry CV3 4LF
Registered in England No: 1672070

On Mon, Apr 28, 2014 at 1:27 AM, Yang Andy 
mailto:williamyan...@hotmail.com>> wrote:
Hi Ning

I want to design software architecture as below:

1.Put web application on the folder.

2.Develop a applcation which will display web application Icon or name from the 
folder.

3.When user click the selected application icon ,i will do some action similar 
[wrt-installer] to insatll web application.

The question is that  whether i can design function similar wrt-installer or 
not.

For example i can write some script to simulate wrt-installer.

Could you give me some advice?

Thank you.

Andy

From: ning.w.w...@intel.com<mailto:ning.w.w...@intel.com>
To: williamyan...@hotmail.com<mailto:williamyan...@hotmail.com>; 
ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: RE: [TizenIVI 3.0]Question about WebApplication Install on the wayland
Date: Mon, 28 Apr 2014 07:52:59 +

Hi Andy,

How could you browse files in a folder? A file explorer? To my knowledge, it's 
not available in IVI yet. So no way to install a web app by double click either.

Thanks,
Ning
From: IVI 
[mailto:ivi-boun...@lists.tizen.org<mailto:ivi-boun...@lists.tizen.org>] On 
Behalf Of Yang Andy
Sent: Monday, April 28, 2014 3:33 PM
To: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: [TizenIVI 3.0]Question about WebApplication Install on the waylan

RE: [TizenIVI 3.0]Question about WebApplication Install on the wayland

[VanCutsem, Geoffroy]

Hi Andy,

I would agree with Paul, it's best to use wrt-installer if you can to 
install/remove applications. If your application is written in HTML5/JS, there 
is Tizen Device API for that too:
- tizen.package API: 
https://developer.tizen.org/dev-guide/2.2.1/org.tizen.web.device.apireference/tizen/package.html

If you want an example on how such Web API is used, take a look here: 
https://review.tizen.org/git/?p=profile/ivi/Modello_Appmanager.git;a=tree;h=refs/heads/tizen;hb=refs/heads/tizen

Thanks,
Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Hanchett, Paul
Sent: Monday, April 28, 2014 5:47 PM
To: Yang Andy
Cc: ivi@lists.tizen.org
Subject: Re: [TizenIVI 3.0]Question about WebApplication Install on the wayland

Why not just spawn a call to wrt-installer?

Duplicating something the system already does, could lead to a fragile design 
and there's significant risk-- You may not have access to all of the relevant 
data structures (both knowledge and execution privilege), there's always the 
possibility that a bug in your code could kill the system, and worst you 
potentially have to play catch-up if the install process changes.

Just some thoughts...  :-)

Paul



Paul Hanchett
---
Infotainment Engineer
MSX on behalf of Jaguar Land Rover
One World Trade Center, 121 Southwest Salmon Street, 11th Floor, Portland, 
Oregon, 97204

Email: phanc...@jaguarlandrover.com
---

Business Details:
Jaguar Land Rover Limited
Registered Office: Abbey Road, Whitley, Coventry CV3 4LF
Registered in England No: 1672070

On Mon, Apr 28, 2014 at 1:27 AM, Yang Andy 
mailto:williamyan...@hotmail.com>> wrote:
Hi Ning

I want to design software architecture as below:

1.Put web application on the folder.

2.Develop a applcation which will display web application Icon or name from the 
folder.

3.When user click the selected application icon ,i will do some action similar 
[wrt-installer] to insatll web application.

The question is that  whether i can design function similar wrt-installer or 
not.

For example i can write some script to simulate wrt-installer.

Could you give me some advice?

Thank you.

Andy

From: ning.w.w...@intel.com
To: williamyan...@hotmail.com; 
ivi@lists.tizen.org
Subject: RE: [TizenIVI 3.0]Question about WebApplication Install on the wayland
Date: Mon, 28 Apr 2014 07:52:59 +


Hi Andy,



How could you browse files in a folder? A file explorer? To my knowledge, it's 
not available in IVI yet. So no way to install a web app by double click either.



Thanks,

Ning

From: IVI 
[mailto:ivi-boun...@lists.tizen.org] On 
Behalf Of Yang Andy
Sent: Monday, April 28, 2014 3:33 PM
To: ivi@lists.tizen.org
Subject: [TizenIVI 3.0]Question about WebApplication Install on the wayland









Hello everyone

I have one question about WebApplication Install on the wayland.

At present,we have to use command [wrt-installer] to install web application on 
the wayland terminal.

Is there method which can install web application by double click the 
application icon on the folder?

or is there a plan that will add this function by TizenIVI community?

[TizenIVI version]
3.0

Thank you.

Andy

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Web browser on tizen ivi

[VanCutsem, Geoffroy]

Can you explain a bit more where this error is occurring, I have not seen it 
myself. I typically launch MiniBrowser from the Weston-terminal window (as 
‘app’ user). Could it be that you were trying to do this from a virtual console 
or an SSH session? Can you let me know what image you are using?

Thanks,
Geoffroy

From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of ismail yildiz
Sent: Thursday, April 24, 2014 10:04 AM
To: Olivier Delbeke
Cc: ivi@lists.tizen.org
Subject: Re: Web browser on tizen ivi

Anybody have already resolved this problem ??

2014-04-23 15:27 GMT+02:00 Olivier Delbeke 
mailto:olivier.delb...@awtce.be>>:
Hi Ismail,

You can get rid of the "Could not connect to Wayland display" error by executing
export WAYLAND_DISPLAY=wayland-0

Then, executing "MiniBrowser" should work (it works for me, as user 'app').

Best regards,
Olivier


[Inactive hide details for ismail yildiz ---04/23/2014 02:59:08 PM---ismail 
yildiz ]ismail yildiz ---04/23/2014 02:59:08 
PM---ismail yildiz mailto:ismail.yildi...@gmail.com>>
ismail yildiz mailto:ismail.yildi...@gmail.com>>
Sent by: "IVI" mailto:ivi-boun...@lists.tizen.org>>

04/23/2014 02:59 PM


To


ivi@lists.tizen.org


cc




Subject


Web browser on tizen ivi








Hi all,

Someone have a web browser functional on tizen ?
Because when I launch chromium-browser I have the sandbox issue ( 
usr/lib/chromium/chrome --no-sandbox )
When I launch Minibrowser, I have a efl problem :
ecore_wl ecore_wl.c:173 ecore_wl_init() Could not connect to Wayland display
ewebkit2 
/home/abuild/rpmbuild/BUILD/webkit2-efl-123997_0.12.1/Source/WebKit2/UIProcess/API/efl/ewk_main.cpp:96
 ewk_init() could not init ecore_wl.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

This mail, and any attachments thereto, is intended only for use by the 
addressee(s) named herein and may contain legally privileged and/or 
confidential information. If you are not the intended recipient, please note 
that any review, dissemination, disclosure, alteration, printing, copying or 
transmission of this mail and/or any file transmitted with it, is strictly 
prohibited and may be unlawful. If you have received this mail by mistake, 
please immediately notify the sender as well as our mail administrator at 
postmas...@aweurope.be, and permanently destroy 
the original as well as any copy thereof.

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: ozone-wayland installation

[VanCutsem, Geoffroy]

Thanks Qiang for clarifying this.

What is gbp and how are .gbs.conf and .gbp.conf different?

Thanks,
Geoffroy

From: Zhang, Qiang Z
Sent: Monday, April 14, 2014 4:46 AM
To: VanCutsem, Geoffroy; maximouton .
Cc: ivi@lists.tizen.org
Subject: RE: ozone-wayland installation

Hi Maximilien and Geoffroy,

No need to rename .gbp.conf as .gbs.conf, and .gbp.conf is for gbp used.

I have tried in my local machine, I found it's a little hack in 
packaging/rpm/gbp-flat-tree.sh, which hard code and depend on a src directory 
on top of ozone-wayland.
So, the following command works:
$ git clone https://github.com/01org/ozone-wayland.git src/ozone-wayland
$ cd src/ozone-wayland/
$ gbs build --packaging-dir=packaging/rpm -A i586

Thanks
Qiang


From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of VanCutsem, Geoffroy
Sent: Monday, April 14, 2014 12:38 AM
To: maximouton .
Cc: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: RE: ozone-wayland installation

Hi Maximilien,

I'm assuming you're trying to build the git repo that's here: 
https://github.com/01org/ozone-wayland

I've never tried myself (yet) but I've quickly looked at the code in there and 
noticed that there is a file called .gbp.conf [1] which seems related to the 
issue you're facing below. If I understand that file correctly, the idea is 
that it should be picked up by GBS automatically... but for that to happen it 
should be called '.gbs.conf' (instead of '.gbp.conf'). Can you rename it and 
try again (you will need to use '--include-all' if you don't commit this name 
change in your local git).

Let us know if that helps!

Cheers,
Geoffroy

[1] https://github.com/01org/ozone-wayland/blob/master/.gbp.conf


From: maximouton . [mailto:maximou...@gmail.com]
Sent: Sunday, April 13, 2014 5:37 PM
To: VanCutsem, Geoffroy
Cc: Tiago Vignatti; ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: Re: ozone-wayland installation

Right. gbs was pointing to the wrong URL. I didn't know where to change it.

But still there is a problem may be due to a misconfiguration:

gbs -c ~/.gbs.conf build -A i586 --packaging-dir packaging/rpm/ --include-all
info: generate repositories ...
info: build conf has been downloaded at:
  /var/tmp/netlab-gbs/tizen.conf
info: start building packages from: /home/netlab/Desktop/ozone-wayland (git)
2014-04-13 17:28 +0200
info: prepare sources...
info: start export source from: /home/netlab/Desktop/ozone-wayland ...
info: Creating (native) source archive chromium.tar from 
'0b393ca1c4c4074e20a110413cd4b6e4f15267e7'
removed '/var/tmp/.gbs_export_5KWF0s/chromium.tar'
Creating a new /var/tmp/.gbs_export_5KWF0s/chromium.tar from /home/netlab/src
tar: src: Cannot stat: No such file or directory
tar: Exiting with failure status due to previous errors
error: Couldn't run './gbp-flat-tree.sh': ./gbp-flat-tree.sh returned 2
error: Failed to export packaging files from git tree
info: retrieving repo metadata...
info: parsing package data...
info: building repo metadata ...
info: package dependency resolving ...
warning: no available packages to build.
info: *** Build Status Summary ***
=== the following packages failed to build because export source files to build 
environment failed (1) ===
chromium-35.0.1906.0-0

=== Total succeeded built packages: (0) ===
info: generated html format report:
 /home/netlab/GBS-ROOT/local/repos/tizen/i586/index.html
info: generated RPM packages can be found from local repo:
 /home/netlab/GBS-ROOT/local/repos/tizen/i586/RPMS
info: generated source RPM packages can be found from local repo:
 /home/netlab/GBS-ROOT/local/repos/tizen/i586/SRPMS
info: build logs can be found in:
 /home/netlab/GBS-ROOT/local/repos/tizen/i586/logs
info: build roots located in:
 /home/netlab/GBS-ROOT/local/BUILD-ROOTS/scratch.i586.*
error: some packages failed to be built

Note that the folder /home/netlab/src nerver existed.

Maximilien
2014-04-11 18:23 GMT+02:00 VanCutsem, Geoffroy 
mailto:geoffroy.vancut...@intel.com>>:
The repo your gbs.conf points to does not exist. You should update it to point 
at a valid repo (which matches the Tizen image you want to build this for).

Geoffroy

-Original Message-
From: IVI 
[mailto:ivi-boun...@lists.tizen.org<mailto:ivi-boun...@lists.tizen.org>] On 
Behalf Of Tiago Vignatti
Sent: Friday, April 11, 2014 6:16 PM
To: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: Re: ozone-wayland installation

Hi,

I don't know exactly why you're having this problem; looks more like a network 
issue or something.

In any case, Ozone-Wayland can be seen as a part of Chromium project meaning 
that targets like Chromium Browser and Crosswalk are actually the ones supposed 
to be built.. you know, with Ozone-Wayland only you cannot do anything :) But 
as Joel said, come to #ozone-wayland and we try to track down t

RE: ozone-wayland installation

[VanCutsem, Geoffroy]

Hi Maximilien,

I'm assuming you're trying to build the git repo that's here: 
https://github.com/01org/ozone-wayland

I've never tried myself (yet) but I've quickly looked at the code in there and 
noticed that there is a file called .gbp.conf [1] which seems related to the 
issue you're facing below. If I understand that file correctly, the idea is 
that it should be picked up by GBS automatically... but for that to happen it 
should be called '.gbs.conf' (instead of '.gbp.conf'). Can you rename it and 
try again (you will need to use '--include-all' if you don't commit this name 
change in your local git).

Let us know if that helps!

Cheers,
Geoffroy

[1] https://github.com/01org/ozone-wayland/blob/master/.gbp.conf


From: maximouton . [mailto:maximou...@gmail.com]
Sent: Sunday, April 13, 2014 5:37 PM
To: VanCutsem, Geoffroy
Cc: Tiago Vignatti; ivi@lists.tizen.org
Subject: Re: ozone-wayland installation

Right. gbs was pointing to the wrong URL. I didn't know where to change it.

But still there is a problem may be due to a misconfiguration:

gbs -c ~/.gbs.conf build -A i586 --packaging-dir packaging/rpm/ --include-all
info: generate repositories ...
info: build conf has been downloaded at:
  /var/tmp/netlab-gbs/tizen.conf
info: start building packages from: /home/netlab/Desktop/ozone-wayland (git)
2014-04-13 17:28 +0200
info: prepare sources...
info: start export source from: /home/netlab/Desktop/ozone-wayland ...
info: Creating (native) source archive chromium.tar from 
'0b393ca1c4c4074e20a110413cd4b6e4f15267e7'
removed '/var/tmp/.gbs_export_5KWF0s/chromium.tar'
Creating a new /var/tmp/.gbs_export_5KWF0s/chromium.tar from /home/netlab/src
tar: src: Cannot stat: No such file or directory
tar: Exiting with failure status due to previous errors
error: Couldn't run './gbp-flat-tree.sh': ./gbp-flat-tree.sh returned 2
error: Failed to export packaging files from git tree
info: retrieving repo metadata...
info: parsing package data...
info: building repo metadata ...
info: package dependency resolving ...
warning: no available packages to build.
info: *** Build Status Summary ***
=== the following packages failed to build because export source files to build 
environment failed (1) ===
chromium-35.0.1906.0-0

=== Total succeeded built packages: (0) ===
info: generated html format report:
 /home/netlab/GBS-ROOT/local/repos/tizen/i586/index.html
info: generated RPM packages can be found from local repo:
 /home/netlab/GBS-ROOT/local/repos/tizen/i586/RPMS
info: generated source RPM packages can be found from local repo:
 /home/netlab/GBS-ROOT/local/repos/tizen/i586/SRPMS
info: build logs can be found in:
 /home/netlab/GBS-ROOT/local/repos/tizen/i586/logs
info: build roots located in:
 /home/netlab/GBS-ROOT/local/BUILD-ROOTS/scratch.i586.*
error: some packages failed to be built

Note that the folder /home/netlab/src nerver existed.

Maximilien
2014-04-11 18:23 GMT+02:00 VanCutsem, Geoffroy 
mailto:geoffroy.vancut...@intel.com>>:
The repo your gbs.conf points to does not exist. You should update it to point 
at a valid repo (which matches the Tizen image you want to build this for).

Geoffroy

-Original Message-
From: IVI 
[mailto:ivi-boun...@lists.tizen.org<mailto:ivi-boun...@lists.tizen.org>] On 
Behalf Of Tiago Vignatti
Sent: Friday, April 11, 2014 6:16 PM
To: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>
Subject: Re: ozone-wayland installation

Hi,

I don't know exactly why you're having this problem; looks more like a network 
issue or something.

In any case, Ozone-Wayland can be seen as a part of Chromium project meaning 
that targets like Chromium Browser and Crosswalk are actually the ones supposed 
to be built.. you know, with Ozone-Wayland only you cannot do anything :) But 
as Joel said, come to #ozone-wayland and we try to track down together what's 
going on...

Tiago


On 04/11/2014 10:43 AM, maximouton . wrote:
>
> Recently I discovered this interesting project ozone-wayland.
> I decided to test it on my platform but when trying to build the rpm
> on ubuntu 13.10 I get the folowing:
>
> gbs -v build -A i586 --packaging-dir packaging/rpm/
> info: generate repositories ...
> debug: fetching
> http://download.tizen.org/releases/daily/trunk/ivi/latest/repodata/rep
> omd.xml => /var/tmp/netlab-gbs/gbscachedgb1H6/repomd.xml
> debug: disable HTTP caching
> debug: fetching error:(22, 'The requested URL returned error: 404 Not
> Found')
> ...
>
> Did anybody tried to install ozone-wayland already?

___
IVI mailing list
IVI@lists.tizen.org<mailto:IVI@lists.tizen.org>
https://lists.tizen.org/listinfo/ivi
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1

RE: ozone-wayland installation

[VanCutsem, Geoffroy]

The repo your gbs.conf points to does not exist. You should update it to point 
at a valid repo (which matches the Tizen image you want to build this for).

Geoffroy

-Original Message-
From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Tiago Vignatti
Sent: Friday, April 11, 2014 6:16 PM
To: ivi@lists.tizen.org
Subject: Re: ozone-wayland installation

Hi,

I don't know exactly why you're having this problem; looks more like a network 
issue or something.

In any case, Ozone-Wayland can be seen as a part of Chromium project meaning 
that targets like Chromium Browser and Crosswalk are actually the ones supposed 
to be built.. you know, with Ozone-Wayland only you cannot do anything :) But 
as Joel said, come to #ozone-wayland and we try to track down together what's 
going on...

Tiago


On 04/11/2014 10:43 AM, maximouton . wrote:
>
> Recently I discovered this interesting project ozone-wayland.
> I decided to test it on my platform but when trying to build the rpm 
> on ubuntu 13.10 I get the folowing:
>
> gbs -v build -A i586 --packaging-dir packaging/rpm/
> info: generate repositories ...
> debug: fetching
> http://download.tizen.org/releases/daily/trunk/ivi/latest/repodata/rep
> omd.xml => /var/tmp/netlab-gbs/gbscachedgb1H6/repomd.xml
> debug: disable HTTP caching
> debug: fetching error:(22, 'The requested URL returned error: 404 Not
> Found')
> ...
>
> Did anybody tried to install ozone-wayland already?

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.

___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Issues in Image creation for i585 for Tizen 2.2.1

[VanCutsem, Geoffroy]

Hi Vivek,

You have reached us on the IVI (In-Vehicle Infotainment) mailing list so I'm 
really not sure how many of us have expertise running the mobile image on the 
emulator. I'd advise you to re-send this to the 
gene...@lists.tizen.org or 
d...@lists.tizen.org instead.

Cheers,
Geoffroy

From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On 
Behalf Of Vivek Chandra Amancha
Sent: Tuesday, April 08, 2014 9:05 AM
To: ivi@lists.tizen.org
Subject: Issues in Image creation for i585 for Tizen 2.2.1

Hello,
I've compiled Tizen 2.2.1 source code for Tizen Mobile, i586 architecture. The 
build was successful and I created an image using handset-blackbay.ks file for 
emulator.

After creation of the image I converted the raw platform.img file to QCOW file 
using following command
qemu-img convert -O qcow2 platform.img platform.x86.
The image is getting converted to qcow2 format successfully, but when I create 
an emulator with this qcow2 image the emulator stops at the boot screen, 
popping message "Booting the kernel" and doesn't proceed any further. I'm even 
unable to connect to the shell of the emulator using sdb.

I wanted to know where I'm making mistake, whether the procedure followed by me 
is correct or not for emulator image conversion to qcow2??


Thanks & Regards,
Vivek.

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

RE: Launch weston ivi shell - unresponsive homescreen..

[VanCutsem, Geoffroy]

Hi ,

My bad, this is provided by mesa-devel. There are a few other dependencies that 
you may need to pull in for mesa-devel (e.g. libgbm-devel, …). If you have a 
running system, you can find out about these as follows:

-  E.g.: zypper se --provides wayland-egl

-  $zypper info  --requires mesa-devel

If you’re going to build packages that have a substantial number of 
dependencies, you should consider just synchronizing the entire repo, you can 
use rsync for that, e.g.

-  $rsync -avzL --delete 
rsync://download.tizen.org/all/releases/daily/tizen/ivi/ivi-release/latest/ 
(<-- note the parts in bold in the URL)

Thanks,
Geoffroy

From: karthik karthik [mailto:karthikkarthik...@yahoo.in]
Sent: Tuesday, April 08, 2014 5:26 AM
To: VanCutsem, Geoffroy
Cc: ivi@lists.tizen.org
Subject: Launch weston ivi shell - unresponsive homescreen..


Hi,

I tried this package from the link you had sent.. still the same error 
persists..



From: VanCutsem, Geoffroy 
mailto:geoffroy.vancut...@intel.com>>;
To: karthikkarthik...@yahoo.in<mailto:karthikkarthik...@yahoo.in> 
mailto:karthikkarthik...@yahoo.in>>;
Cc: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org> 
mailto:ivi@lists.tizen.org>>; 
s.vorob...@samsung.com<mailto:s.vorob...@samsung.com> 
mailto:s.vorob...@samsung.com>>; Zhang, Qiang Z 
mailto:qiang.z.zh...@intel.com>>; Huang, JunX A 
mailto:junx.a.hu...@intel.com>>;
Subject: RE: Launch weston ivi shell - unresponsive homescreen..
Sent: Mon, Apr 7, 2014 11:29:47 AM

Can you try downloading this package too: 
http://download.tizen.org/releases/daily/tizen/ivi/ivi-release/tizen_20140404.14/repos/ivi/ia32/packages/i686/wayland-devel-1.4.0-1.3.i686.rpm

Geoffroy

From: karthikkarthik...@yahoo.in<mailto:karthikkarthik...@yahoo.in> 
[mailto:karthikkarthik...@yahoo.in]
Sent: Monday, April 07, 2014 1:19 PM
To: VanCutsem, Geoffroy
Cc: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org>; 
s.vorob...@samsung.com<mailto:s.vorob...@samsung.com>; Zhang, Qiang Z; Huang, 
JunX A
Subject: Re: Launch weston ivi shell - unresponsive homescreen..


Hi,

Tried to built against a local repo (downloaded rpm’s from the tizen).. I am 
able to solve the dependencies except one..

=== the following packages failed to build due to missing build dependencies 
(1) ===
weston:
nothing provides pkgconfig(wayland-egl)

I downloaded the libwayland-egl rpm package 
(libwayland-egl-9.2.1-19.39.i686.rpm ) from tizen

(path : 
http://download.tizen.org/releases/daily/tizen/ivi/ivi-release/tizen_20140404.14/repos/ivi/ia32/packages/i686/)..

still the dependency is not resolved..

Can you guys help me with this ??


____
From: karthik karthik >;
To: VanCutsem, Geoffroy >;
Cc: ivi@lists.tizen.org 
>; 
s.vorob...@samsung.com 
>; Zhang, Qiang Z 
>; Huang, JunX A 
>;
Subject: Re: Launch weston ivi shell - unresponsive homescreen..
Sent: Mon, Apr 7, 2014 4:42:11 AM


Thanks Geoffroy for the reply,

" It looks like gbs does not even reach the remote repo at all. Could it be 
blocked by a firewall or is there a proxy that you'd still need to configure?"

Yes, it can be a proxy issue. I will check it..

As you have explained below in quotes

"The method that you call offline is actually to build the entire stack from 
scratch (offline) using only a minimal set of tools (bootstrap) that is stored 
in the 'toolchain' project. What happens in this case is that you're only 
trying to build weston from the bootstrap repo but you have not yet build all 
its dependencies and so it fails.

If you want to build just one (or a few) packages in 'offline' mode then you 
should mirror an existing repository locally and use that from your gbs.conf 
file."

Is my understanding correct ?

1) Toolchain project will only have the basic set of rpm's required for 
building but not all the rpms. So since I am using it, the rpm's which Weston 
requires are not available for it.

2) So we need to point to the other rpm's that Weston needs to build.

3) This folder is something that I might not be giving properly now.

So is it possible to create a separate folder just containing the rpm's (just 
download the required rpm's) that are required by Weston (listed below..).. Is 
there a way to point to this folder and build Weston ??

weston: nothing provides expat-devel
nothing provides libjpeg-devel
nothing provides libvpx-devel
nothing provides pam-devel
nothing provides pkgconfig(cairo)
nothing provides pkgconfig(cairo-egl) >= 1.11.3
nothing provides pkgconfig(egl) >= 7.10 nothing provides pkgconfig(gbm)
nothing provides pkgconfig(gio-2.0)
nothing provides pkgconfig(glesv2)
nothing provides pkgconfig(glib-2.0)
nothing provides pkgconfig(gobject-2.0) nothing provides pkgconfig(libdrm) >= 
2.4.30 nothing provides pkgconfig(libffi)
no

RE: Launch weston ivi shell - unresponsive homescreen..

[VanCutsem, Geoffroy]

Can you try downloading this package too: 
http://download.tizen.org/releases/daily/tizen/ivi/ivi-release/tizen_20140404.14/repos/ivi/ia32/packages/i686/wayland-devel-1.4.0-1.3.i686.rpm

Geoffroy

From: karthikkarthik...@yahoo.in [mailto:karthikkarthik...@yahoo.in]
Sent: Monday, April 07, 2014 1:19 PM
To: VanCutsem, Geoffroy
Cc: ivi@lists.tizen.org; s.vorob...@samsung.com; Zhang, Qiang Z; Huang, JunX A
Subject: Re: Launch weston ivi shell - unresponsive homescreen..


Hi,

Tried to built against a local repo (downloaded rpm’s from the tizen).. I am 
able to solve the dependencies except one..

=== the following packages failed to build due to missing build dependencies 
(1) ===
weston:
nothing provides pkgconfig(wayland-egl)

I downloaded the libwayland-egl rpm package 
(libwayland-egl-9.2.1-19.39.i686.rpm ) from tizen

(path : 
http://download.tizen.org/releases/daily/tizen/ivi/ivi-release/tizen_20140404.14/repos/ivi/ia32/packages/i686/)..

still the dependency is not resolved..

Can you guys help me with this ??



From: karthik karthik 
mailto:karthikkarthik...@yahoo.in>>;
To: VanCutsem, Geoffroy 
mailto:geoffroy.vancut...@intel.com>>;
Cc: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org> 
mailto:ivi@lists.tizen.org>>; 
s.vorob...@samsung.com<mailto:s.vorob...@samsung.com> 
mailto:s.vorob...@samsung.com>>; Zhang, Qiang Z 
mailto:qiang.z.zh...@intel.com>>; Huang, JunX A 
mailto:junx.a.hu...@intel.com>>;
Subject: Re: Launch weston ivi shell - unresponsive homescreen..
Sent: Mon, Apr 7, 2014 4:42:11 AM


Thanks Geoffroy for the reply,

" It looks like gbs does not even reach the remote repo at all. Could it be 
blocked by a firewall or is there a proxy that you'd still need to configure?"

Yes, it can be a proxy issue. I will check it..

As you have explained below in quotes

"The method that you call offline is actually to build the entire stack from 
scratch (offline) using only a minimal set of tools (bootstrap) that is stored 
in the 'toolchain' project. What happens in this case is that you're only 
trying to build weston from the bootstrap repo but you have not yet build all 
its dependencies and so it fails.

If you want to build just one (or a few) packages in 'offline' mode then you 
should mirror an existing repository locally and use that from your gbs.conf 
file."

Is my understanding correct ?

1) Toolchain project will only have the basic set of rpm's required for 
building but not all the rpms. So since I am using it, the rpm's which Weston 
requires are not available for it.

2) So we need to point to the other rpm's that Weston needs to build.

3) This folder is something that I might not be giving properly now.

So is it possible to create a separate folder just containing the rpm's (just 
download the required rpm's) that are required by Weston (listed below..).. Is 
there a way to point to this folder and build Weston ??

weston: nothing provides expat-devel
nothing provides libjpeg-devel
nothing provides libvpx-devel
nothing provides pam-devel
nothing provides pkgconfig(cairo)
nothing provides pkgconfig(cairo-egl) >= 1.11.3
nothing provides pkgconfig(egl) >= 7.10 nothing provides pkgconfig(gbm)
nothing provides pkgconfig(gio-2.0)
nothing provides pkgconfig(glesv2)
nothing provides pkgconfig(glib-2.0)
nothing provides pkgconfig(gobject-2.0) nothing provides pkgconfig(libdrm) >= 
2.4.30 nothing provides pkgconfig(libffi)
nothing provides pkgconfig(libsystemd-login) nothing provides 
pkgconfig(libudev) >= 136 nothing provides pkgconfig(mtdev) >= 1.1.0 nothing 
provides pkgconfig(pangocairo) nothing provides pkgconfig(pixman-1)
nothing provides pkgconfig(poppler-glib) nothing provides 
pkgconfig(wayland-client) nothing provides pkgconfig(wayland-egl) nothing 
provides pkgconfig(wayland-server)

Thanks,



From: VanCutsem, Geoffroy 
mailto:geoffroy.vancut...@intel.com>>;
To: karthikkarthik...@yahoo.in<mailto:karthikkarthik...@yahoo.in> 
mailto:karthikkarthik...@yahoo.in>>;
Cc: ivi@lists.tizen.org<mailto:ivi@lists.tizen.org> 
mailto:ivi@lists.tizen.org>>; 
s.vorob...@samsung.com<mailto:s.vorob...@samsung.com> 
mailto:s.vorob...@samsung.com>>; Zhang, Qiang Z 
mailto:qiang.z.zh...@intel.com>>; Huang, JunX A 
mailto:junx.a.hu...@intel.com>>;
Subject: Re: Launch weston ivi shell - unresponsive homescreen..
Sent: Fri, Apr 4, 2014 10:26:42 AM

On Fri, 2014-04-04 at 16:47 +0800, karthik karthik wrote:
> Thanks to all for the replies,
>
> Stanislav,
>
> Big thanks for the rpm. You rpm worked.. I am able to interact with the 
> screen.. But I am not able to launch the native applications as such.
> Any reason why I am not able to launch ??
>
> Geoffroy/Qiang,
>
> I tried you .gbs.cong file. I have attached the debu

Re: how to disable PS/2 mouse in weston ?

[VanCutsem, Geoffroy]

Hi Stanislav,

On Fri, 2014-04-04 at 15:06 +0400, Stanislav Vorobiov wrote:
> Hi everyone,
> 
> I have a Tizen IVI system with a touchscreen only, but my kernel also has 
> support for PS/2 mouse, i.e. CONFIG_MOUSE_PS2 is "y" in kernel config.
> When weston starts it finds 2 devices - touchscreen and a mouse and it 
> displays mouse pointer on desktop, but it's not usable, since my system 
> doesn't actually
> have a mouse plugged in PS/2 port. Touchscreen works however, i.e. I can 
> click on things, open/drag windows around, but the mouse pointer just stands 
> there.
> If I disable PS/2 mouse support in kernel, i.e. CONFIG_MOUSE_PS2 set to "n", 
> then weston doesn't detect a mouse and there's no pointer on desktop. This is 
> exactly
> the kind of behaviour I want, but can I have it without disabling PS/2 mouse 
> in kernel config ?
This is configured as a module in our latest Tizen IVI kernel and we
have a mechanism in place so that it does not get loaded *unless* we're
running in a VMware Virtual machine which is so far the only platform
that needs it. We have a udev rule for that and IIRC the hwdata package
was modified to not auto-load this module as it was badly affecting the
overall boot time.

There may be a way of preventing the cursor from being displayed (a bit
like the -nocursor option for Xorg)... I'm not sure (it may be a useful
option actually) 

Geoffroy
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: ofono dbus service can not launch

[VanCutsem, Geoffroy]

On Fri, 2014-04-04 at 09:02 +, kongling wrote:
> there is a error message "No modems powered! Run connman or
> test/enable-modem" while i am using lemono.
Lemolo expects to have a phone that has been paired (bluetooth) with the
platform. Can you confirm that you have already established that
BT-pairing with your phone?

> 
> then i use "dbus-send" command to check the ofono service is running
> or not.
> 
> dbus-send --session --print-reply
> --dest=org.freedesktop.DBus /org/freedesktop/DBus
> org.freedesktop.DBus.ListActivatableNames
> method return sender=org.freedesktop.DBus -> dest=:1.2 reply_serial=2
>array [
>   string "org.freedesktop.DBus"
>   string "org.gnome.evolution.dataserver.Calendar4"
>   string "org.gnome.Rygel1"
>   string "org.gnome.GConf"
>   string "org.freedesktop.systemd1"
>   string "org.bluetooth.share"
>   string "org._01.pim.contacts"
>   string "org.syncevolution"
>   string "org.tizen.nfc_service"
>   string "org.tizen.dialer"
>   string "org.tizen.email_service"
>   string "org.tizen.srs"
>   string "com.intel.dleyna-renderer"
>   string "com.intel.dleyna-server"
>   string "org.bluez.obex"
>   string "org.gnome.evolution.dataserver.AddressBook5"
>   string "org.gnome.evolution.dataserver.Sources1"
>]
> 
> dbus-send --system --print-reply
> --dest=org.freedesktop.DBus /org/freedesktop/DBus
> org.freedesktop.DBus.ListActivatableNames
> method return sender=org.freedesktop.DBus -> dest=:1.50 reply_serial=2
>array [
>   string "org.freedesktop.DBus"
>   string "org.freedesktop.login1"
>   string "org.freedesktop.machine1"
>   string "org.freedesktop.systemd1"
>   string "org.freedesktop.PolicyKit1"
>   string "org.freedesktop.hostname1"
>   string "org.bluez"
>   string "org.projectx.bt_core"
>   string "org.projectx.bt"
>   string "org.pacrunner"
>   string "org.freedesktop.UDisks2"
>   string "org.download-provider"
>   string "org.tizen.slp.pkgmgr"
>   string "org.opensuse.Snapper"
>   string "fi.epitest.hostap.WPASupplicant"
>   string "net.netconfig"
>   string "fi.w1.wpa_supplicant1"
>   string "org.freedesktop.timedate1"
>   string "org.tizen.SecurityDaemon"
>   string "org.freedesktop.locale1"
>]
> 
> in this information ,there is no service named org.ofono .
> 
> so,i use command "dbus-send --session --print-reply
> --dest=org.freedesktop.DBus /org/freedesktop/DBus
> org.freedesktop.DBus.StartServiceByName string:'org.ofono' uint32:0"
> to launch service,but error message is found.
> 
> Error org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono
> was not provided by any .service files
> 
> what's the problem? is there any way to launch the ofono service?
> 
> thanks.
> 
> 
> ___
> IVI mailing list
> IVI@lists.tizen.org
> https://lists.tizen.org/listinfo/ivi

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: Launch weston ivi shell - unresponsive homescreen..

[VanCutsem, Geoffroy]

On Fri, 2014-04-04 at 16:47 +0800, karthik karthik wrote:
> Thanks to all for the replies,
> 
> Stanislav,
> 
> Big thanks for the rpm. You rpm worked.. I am able to interact with the 
> screen.. But I am not able to launch the native applications as such.
> Any reason why I am not able to launch ??
> 
> Geoffroy/Qiang,
> 
> I tried you .gbs.cong file. I have attached the debug logs. I still want to 
> know how to build the rpm using gbs build..
It looks like gbs does not even reach the remote repo at all. Could it
be blocked by a firewall or is there a proxy that you'd still need to
configure?

I noticed that the error message mentions 'hhtp' and not 'http'... not
sure if it's a typo in the gbs error message itself or whether there was
a typo introduced in your gbs.conf file... what version of gbs are you
using?

It looks like you have saved the file as '.gbs.conf', effectively
replacing the one that is part of the weston git sources. What I
typically do instead is keep my custom gbs.conf file outside of the
folder (i.e. directly in my home directory) and then use it as follows:
$ gbs -c ~/gbs.conf lb -A i586 --include
That way, I don't overwrite the existing .gbs.conf file in the source
code.

If your objective is to just recompile one or a few packages, then I
would actually advice to pick one of the gbs.conf file references here:
https://wiki.tizen.org/wiki/IVI/GBS_configuration_files_Tizen_IVI

I'm not even sure what build.conf it picked up in your testing. If
you're using a complete repo then gbs typically picks up the build.conf
from there.

I have just tested here that I can recompile weston (without the patch)
using the gbs.conf file I sent you earlier *but* in which I had
commented out the line about buildconf (in the [profile.tizen3.0]
section)

> 
> Huang,
> 
> I have tried to point to the local repo's. But I am not sure whether the 
> method is right or not..
> 
> Let me explain my understanding of the gbs build process..
> 
> 
> 1)  Gbs clone to get the source folders and directories.
> 
> 2)  Now comes the issue of solving the dependencies.
> 
> 3)  There are two ways
> 
> a.   Online method.
> 
> b.  Offline method.
> 
> 4)  In the offline method, I feel that I should be pointing the url to 
> the folder that contains the relevant rpms.
> 
> 5)  Here in the .gbs.conf file I used, I had pointed it to the toolchain 
> folder.
The method that you call offline is actually to build the entire stack
from scratch (offline) using only a minimal set of tools (bootstrap)
that is stored in the 'toolchain' project. What happens in this case is
that you're only trying to build weston from the bootstrap repo but you
have not yet build all its dependencies and so it fails.

If you want to build just one (or a few) packages in 'offline' mode then
you should mirror an existing repository locally and use that from your
gbs.conf file.

Does that make sense?

> 
> 6)  Toolchain folder doesn't have all the necessary rpm..
> 
> 
> So my question is when it is said point to the repos, what should I point to??

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: smack problems - unable to start weston

[VanCutsem, Geoffroy]

The other part of the description (no longer in the thread below) [1]
makes me believe you may be hitting something similar than the issue we
had in VMware: https://bugs.tizen.org/jira/browse/TIVI-2790 (a
workaround is provided, making the kernel driver built-in and a proper
fix is being tracked here: https://bugs.tizen.org/jira/browse/TIVI-2964)

Geoffroy

[1] here is what you also described:
3. Connected to emulator via ttyS0, logged in as "root"
4. weston started, UI is visible and operational

On Fri, 2014-04-04 at 10:18 +0400, Stanislav Vorobiov wrote:
> Hi,
> 
> Yes, I tried adding that too, it didn't help. I also tried it without other 
> changes, that also doesn't seem to help.
> 
> On 04/04/2014 10:01 AM, Ylinen, Mikko wrote:
> > 
> > 
> > 
> > On Thu, Apr 3, 2014 at 4:23 PM, Stanislav Vorobiov  > > wrote:
> > 
> > and IVI specific one:
> > 
> > https://bugs.tizen.org/jira/browse/TIVI-2973
> > 
> > However, workarounds in these tickets don't work for emulator. The 
> > closest is workaround #2
> > 
> > 
> > Do you have the pam_systemd.so module in  /etc/pam.d/systemd-user?
> > 
> > -- Mikko
> 
> ___
> IVI mailing list
> IVI@lists.tizen.org
> https://lists.tizen.org/listinfo/ivi

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: Launch weston ivi shell - unresponsive homescreen..

[VanCutsem, Geoffroy]

On Tue, 2014-04-01 at 19:07 +0800, karthik karthik wrote:
> Hi, 
> 
> Thanks for the reply..
> 
> is it not just possible to move the source code from repository from
> which the code was pulled in, make the changes to evdev.c as per the
> patch and build it in the tizen emulator using make..
> 
> Is there any problem in this approach ??
> 
> 
> 
That should work too. You'll have to install the build tools and build
dependencies on the image. I would also advise to look at the spec file
(%build section) to see what options are used when building that
package.
> 
> ______
> From: VanCutsem, Geoffroy ; 
> To: karthikkarthik...@yahoo.in ; Stanislav
> Vorobiov ; ivi@lists.tizen.org
> ; 
> Subject: RE: Launch weston ivi shell - unresponsive homescreen.. 
> Sent: Tue, Apr 1, 2014 8:56:36 AM 
> 
> 
> This file is not in your image, you should clone the Weston git repo,
> apply the patch there, build a new RPM with the patch in and install
> it in your image. The workflow looks like this on your development
> machine:
> 
> - gbs clone tizen:platform/upstream/Weston
> 
> - git
> apply /path/to/where/you/saved/0001-evdev-support-emulator.patch
> 
> - gbs build -i 586 --include-allu
> 
> (you may have to tweak your gbs.conf file too if not already done:
> https://wiki.tizen.org/wiki/IVI/GBS_configuration_files_Tizen_IVI)
> 
> - Transfer the new RPM to your image
> 
> - Install it there (zipper in --oldpackage
> 
> 
>  
> 
> Geoffroy
> 
>  
> 
> From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org]
> On Behalf Of karthikkarthik...@yahoo.in
> Sent: Tuesday, April 01, 2014 5:53 AM
> To: Stanislav Vorobiov; ivi@lists.tizen.org
> Subject: Re: Launch weston ivi shell - unresponsive homescreen..
> 
>  
> 
> Hi,
> 
> Can some one help me with the location of file "evdev.c" to run the
> patch.. I tried
> 
> Locate evdev.c
> 
> And 
> 
> Find / -name evdev.c
> 
> Both didn't give a result..
> 
> I checked in /usr/src.. I couldn't find it there too..
> 
> Thanks..
> 
> 
>  
> 
> 
>
> __
> From:Stanislav Vorobiov ; 
> To: karthik karthik ; ivi@lists.tizen.org
> ; 
> Subject: Re: Launch weston ivi shell - unresponsive homescreen.. 
> Sent: Mon, Mar 31, 2014 10:41:35 AM 
> 
> 
>  
> 
> Hi,
> 
> It's possibly because of this -
> https://bugs.tizen.org/jira/browse/TIVI-2248
> 
> Currently emulator's touchscreen has problems working with weston, so
> this was worked around
> by the patch which is attached to that ticket. Since you've built
> weston yourself (or used latest RPM)
> you didn't apply the patch and that's why homescreen is unresponsive.
> 
> On 03/31/2014 01:57 PM, karthik karthik wrote:
> > Hi,
> > 
> > I tried to install weston ivi shell in tizen emulator. I am able to
> get the ivi screen with the homescreen button.
> > 
> > But I am not able to launch/move to a new screen. It is as if the
> whole screen is inactive..
> > 
> > I installed the rpm packages for ivi shell from tizen..
> > 
> > Can someone help me in this ??
> > 
> > 
> >
> ---
> > *From: * Wang, Ning W ;
> > *To: * karthik karthik ;
> ivi@lists.tizen.org ;
> > *Subject: * RE: RE: RE: RE: Error installing wayland.. in tizen
> emulator.
> > *Sent: * Mon, Mar 31, 2014 6:51:10 AM
> > 
> > It should not cause any issue. You can run “rpm -qa | grep wayland”
> to double check the version.
> > 
> >  
> > 
> > Thanks,
> > 
> > Ning
> > 
> > *From:*karthik karthik [mailto:karthikkarthik...@yahoo.in]
> > *Sent:* Monday, March 31, 2014 2:44 PM
> > *To:* Wang, Ning W; ivi@lists.tizen.org
> > *Subject:* Re: RE: RE: RE: Error installing wayland.. in tizen
> emulator.
> > 
> >  
> > 
> > Thanks ,
> > 
> > But will the different architecture problem not cause any issues.
> > 
> > Like, how to be sure that the latest installed wayland is used ??
> > 
> > Thanks,
> > 
> >  
> > 
> >
> -

RE: Launch weston ivi shell - unresponsive homescreen..

[VanCutsem, Geoffroy]

This file is not in your image, you should clone the Weston git repo, apply the 
patch there, build a new RPM with the patch in and install it in your image. 
The workflow looks like this on your development machine:

-  gbs clone tizen:platform/upstream/Weston

-  git apply /path/to/where/you/saved/0001-evdev-support-emulator.patch

-  gbs build -i 586 --include-allu

(you may have to tweak your gbs.conf file too if not already done: 
https://wiki.tizen.org/wiki/IVI/GBS_configuration_files_Tizen_IVI)

-  Transfer the new RPM to your image

-  Install it there (zipper in --oldpackage 

Geoffroy

From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On 
Behalf Of karthikkarthik...@yahoo.in
Sent: Tuesday, April 01, 2014 5:53 AM
To: Stanislav Vorobiov; ivi@lists.tizen.org
Subject: Re: Launch weston ivi shell - unresponsive homescreen..


Hi,

Can some one help me with the location of file "evdev.c" to run the patch.. I 
tried

Locate evdev.c

And

Find / -name evdev.c

Both didn't give a result..

I checked in /usr/src.. I couldn't find it there too..

Thanks..



From: Stanislav Vorobiov 
mailto:s.vorob...@samsung.com>>;
To: karthik karthik 
mailto:karthikkarthik...@yahoo.in>>; 
ivi@lists.tizen.org 
mailto:ivi@lists.tizen.org>>;
Subject: Re: Launch weston ivi shell - unresponsive homescreen..
Sent: Mon, Mar 31, 2014 10:41:35 AM

Hi,

It's possibly because of this - https://bugs.tizen.org/jira/browse/TIVI-2248

Currently emulator's touchscreen has problems working with weston, so this was 
worked around
by the patch which is attached to that ticket. Since you've built weston 
yourself (or used latest RPM)
you didn't apply the patch and that's why homescreen is unresponsive.

On 03/31/2014 01:57 PM, karthik karthik wrote:
> Hi,
>
> I tried to install weston ivi shell in tizen emulator. I am able to get the 
> ivi screen with the homescreen button.
>
> But I am not able to launch/move to a new screen. It is as if the whole 
> screen is inactive..
>
> I installed the rpm packages for ivi shell from tizen..
>
> Can someone help me in this ??
>
>
> ---
> *From: * Wang, Ning W >;
> *To: * karthik karthik >; 
> ivi@lists.tizen.org 
> >;
> *Subject: * RE: RE: RE: RE: Error installing wayland.. in tizen emulator.
> *Sent: * Mon, Mar 31, 2014 6:51:10 AM
>
> It should not cause any issue. You can run “rpm -qa | grep wayland” to double 
> check the version.
>
>
>
> Thanks,
>
> Ning
>
> *From:*karthik karthik [mailto:karthikkarthik...@yahoo.in]
> *Sent:* Monday, March 31, 2014 2:44 PM
> *To:* Wang, Ning W; ivi@lists.tizen.org
> *Subject:* Re: RE: RE: RE: Error installing wayland.. in tizen emulator.
>
>
>
> Thanks ,
>
> But will the different architecture problem not cause any issues.
>
> Like, how to be sure that the latest installed wayland is used ??
>
> Thanks,
>
>
>
> ---
>
> *From: *Wang, Ning W  
> >;
> *To: *karthik karthik  
> >; ivi@lists.tizen.org 
>   
> >;
> *Subject: *RE: RE: RE: Error installing wayland.. in tizen emulator.
> *Sent: *Mon, Mar 31, 2014 6:31:08 AM
>
>
>
> Oops.. I only saw the arch error at the first glance. In case you are 
> upgrading a package, “-Uvh” should be used instead of “-ivh”.
>
>
>
> Thanks,
>
> Ning
>
> *From:*karthik karthik [mailto:karthikkarthik...@yahoo.in 
> ]
> *Sent:* Monday, March 31, 2014 2:16 PM
> *To:* Wang, Ning W; ivi@lists.tizen.org 
> *Subject:* Re: RE: RE: Error installing wayland.. in tizen emulator.
>
>
>
> Hi,
>
> I am getting this error when I use the "ignorearch" option..
>
> Smackfs isn't mounted at (null). Going to the image build mode. Preparing... 
>  file /usr/lib/libwayland-client.so.0 
> from install of libwayland-client-1.4.0-10.29.i686 conflicts with file from 
> package
> libwayland-client-1.3.0-10.1.i686
>
> Thanks.
>
>
>
> ---
>
> *From: *Wang, Ning W >;
> *To: *karthikkarthik...@yahoo.in 
> >; 
> ivi@lists.tizen.org 
> >;
> *Subject: *RE: RE: Error installing wayland.. in tizen emulator.
> *Sent: *Mon, Mar 31, 2014 5:58:17 AM
>
>
>
> Please try with --ignorearch option “rpm –ivh foo.rpm --ignorearch”.
>
>
>
> Thanks,
>
> Ning
>
> *From:*karthikkarthik

RE: error at booting

[VanCutsem, Geoffroy]

TIVI-2676 has been fixed in that image. You're most likely hitting 
https://bugs.tizen.org/jira/browse/TIVI-2790 instead, I'd suggest you try out 
tizen_20140331.8 (which includes a fix for TIVI-2790). If that does not help, 
please send us more details on your configuration (host OS, VMware version).

Thanks,
Geoffroy

From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On 
Behalf Of Wang, Ning W
Sent: Tuesday, April 01, 2014 3:21 AM
To: joachim rodrigues; ivi@lists.tizen.org
Subject: RE: error at booting

See https://bugs.tizen.org/jira/browse/TIVI-2676

Thanks,
Ning
From: ivi-boun...@lists.tizen.org 
[mailto:ivi-boun...@lists.tizen.org] On Behalf Of joachim rodrigues
Sent: Tuesday, April 01, 2014 4:00 AM
To: ivi@lists.tizen.org
Subject: error at booting

hi
I'm trying to install the tizen image on vmware
i folowed the tutorial https://wiki.tizen.org/wiki/IVI/IVI_3.0_VMware
with this image : tizen_20140325.15_ivi-release-mbr-i586-sdb.raw

Then when i try to run the vmware i'm getting this error : 
drivers/rtc/hctosys.c unable to open rtc device (rtc0)
can someone help me ?


Thanks in advance

Joachim
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: How to launch a native app ?

[VanCutsem, Geoffroy]

Hi Olivier,

(should have added more pointers ealier on)

On Wed, 2014-03-19 at 17:59 +0100, Olivier Delbeke wrote:
> Dear all,
> 
> I'm trying to make a "hello world" for Tizen IVI (yes, I have high
> hopes). Basically, I created a new project, I took the "dialler"'s
> code as base, stripped it down to a maximum, created a CMakeList.txt,
> a spec file, an xml-file, an icon, built the project with gbs and
> finally installed the resulting rpm on the target. 
> 
> The problem now is to know how to run it. Executing it directly
> returns "ecore_wl_init() Could not connect to Wayland display" and
> "launch_app xxx..hello" returns "... launch failed" (great!).
I mentionned that you should not be root for this but there may be other
things that cause this issue. I'm thinking specifically that if the
SMACK label is not correct then this could be a problem. A quick test
for this would be to add 'security=none' to your kernel command-line and
try again. Note that you really *don't* want to keep running with
security turned off and so we'd need to look at the exact problem for
your app.

>  I assume that the right way is to use launch_app (because other
> native apps seem to be launched this way), but is there any way to get
> any log out of it ?
We have some info about logging on Tizen IVI on this page:
https://wiki.tizen.org/wiki/IVI/Enable_Logging I don't know if this will
yield to any result for your app but please do let me know
(specifically, I'm not familiar as to whether you'd need to do anything
in your app to get additional info).

> Did it fail to find my application ? (I create a .desktop file
> in /usr/share/applications, but does it need anything else ?) Did my
> application crash ? Did I remove too much code from the dialer and did
> my application fail to register itself correctly ? ... I can't find
> anything useful in /var/log, in the output of journalctl or even in
> the output of strace. How can I debug this (if possible, other than
> putting tons of "printf" in launch_app) ?
> 
> More generally, is there any documentation about how to write a native
> app ? About what 'launch_app' does ? About getting logs ?
We have the wiki page above regarding getting logs, any suggestion for
enhancing it is more than welcome. We don't have a wiki page for writing
a native app and we typically point people at the 'lemolo' app as a
starting point (which is exactly what you did). Another good source of
information is the presentation that Dominig Ar Foll presented at FOSDEM
this year entitled: 'A multi-user App Framework' (there is a link to it
here: https://wiki.tizen.org/wiki/IVI#FOSDEM.2714)

Cheers,
Geoffroy
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: How to launch a native app ?

[VanCutsem, Geoffroy]

Hi Olivier,

On Wed, 2014-03-19 at 17:59 +0100, Olivier Delbeke wrote:
> Dear all,
> 
> I'm trying to make a "hello world" for Tizen IVI (yes, I have high
> hopes). Basically, I created a new project, I took the "dialler"'s
> code as base, stripped it down to a maximum, created a CMakeList.txt,
> a spec file, an xml-file, an icon, built the project with gbs and
> finally installed the resulting rpm on the target. 
> 
> The problem now is to know how to run it. Executing it directly
> returns "ecore_wl_init() Could not connect to Wayland display"
Were you trying to start the app as root by any chance? This is
typically the error you'd get when doing so. I'd recommend you try to
run it from the weston-terminal (as the normal 'app' user) at least
initially. Then we can look at how to add it to the ICO HomeScreen
(desktop file)

>  and "launch_app xxx..hello" returns "... launch failed" (great!).
> I assume that the right way is to use launch_app (because other native
> apps seem to be launched this way), but is there any way to get any
> log out of it ? Did it fail to find my application ? (I create
> a .desktop file in /usr/share/applications, but does it need anything
> else ?) Did my application crash ? Did I remove too much code from the
> dialer and did my application fail to register itself correctly ? ...
> I can't find anything useful in /var/log, in the output of journalctl
> or even in the output of strace. How can I debug this (if possible,
> other than putting tons of "printf" in launch_app) ?
> 
> More generally, is there any documentation about how to write a native
> app ? About what 'launch_app' does ? About getting logs ?
> 
> Thank you and best regards,
> 
> Olivier
> 
> 
> 
> ___
> IVI mailing list
> IVI@lists.tizen.org
> https://lists.tizen.org/listinfo/ivi

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: No apps on snapshot images

[VanCutsem, Geoffroy]

On Mon, 2014-03-17 at 17:03 +0100, Olivier Delbeke wrote:
> Hi Geoffroy,
> 
> Thank you again. 
> 
> Applying the recommended patch (=setting "[output] name=LVDS1
> mode=off" instead of commenting the whole output definition) results
> in a small improvement : now, the mouse cursor cannot escape the
> screen any more. But there are still no icons or apps.
> 
> In addition, I also disabled the 'ExampleSource' plugin in AMB
> (/etc/ambd/config), but it didn't get any better. 
> 
> Executing for example "launch_app org.tizen.dialer" results in "...
> successfully launched" but there is still nothing on the display. The
> binary itself is running. 

I'm starting to wonder if this is not something specific to using the
VGA port... let's see if the ICO experts can help us clarify if they
have tested it and if there was any specific configuration required.

> 
> Would my journalctl log be useful to you ?

I don't know but it can't hurt if you send it across so I can take a
look

> 
> Thank you and best regards,
> 
> Olivier
> 
> 
> 
> Inactive hide details for VanCutsem,"VanCutsem, Geoffroy"
> ---03/17/2014 04:33:33 PM---"VanCutsem, Geoffroy"
> 
> 
> "VanCutsem, Geoffroy"
>   
> 
> 03/17/2014 04:33 PM
> 
> 
>To
> 
> Olivier
> Delbeke
> 
> 
>cc
> 
> "'ivi@lists.tizen.org'" 
> 
>   Subject
> 
> Re: No
> apps on
> snapshot
> images
> 
> 
> 
> Hi Olivier,
> 
> On Mon, 2014-03-17 at 14:12 +0100, Olivier Delbeke wrote:
> > Hi Geoffroy,
> > 
> > Thanks a lot for your help (once again). 
> > 
> > I applied the patch you recommended but got the same result
> > (unfortunately). 
> > 
> > Using "ps", I can see the following applications are running :
> > HomeScreen, OnScreen, StatusBar, dialer and MediaPlayer. I don't see
> > the MediaPlayer or the dialler, and I'm not sure what "HomeScreen",
> > "OnScreen" and "StatusBar" are supposed to display (but I have a
> black
> > topbar with the time, a background image and a grey bottom bar with
> > two icons). 
> > 
> > Is there a possibility to know in which state the running
> applications
> > are ? (i.e. if they are hidden by AMB ? If they are drawing
> > something ?) 
> 
> I don't know but this is a very good question... I hope someone can
> fill
> us in on that.
> 
> > 
> > By the way, I also modified all *.desktop files I found and all
> > replaced "NoDisplay=true" by "NoDisplay=false" but it also didn't
> help
> > (I saw in the test results that only apps with this flag should be
> > displayed). 
> > 
> > Could my problem be related to some kind of dual-screen
> > configuration ? I see that I can put my mouse cursor out of the
> screen
> > on the right side. Maybe that's where all the icons and apps are. My
> > weston.ini only has one output enabled (VGA1), however. I played
> with
> > the setting "displayno" setting but got no improvement.
> 
> It could be related to dual-screen... I'm going to try and load the
> exact same image that you're using to have a look at this myself.
> 
> This second screen you're seeing is the LVDS output. This is something
> specific to the VTC7120. You can disable it as described here
> https://wiki.tizen.org/wiki/IVI/IVI_January_15,_3.0-M2-EOY#Disabling_the_LVDS_output_for_the_Nexcom_VTC7120_platforms
> 
> > 
> > Best regards,
> > 
> > Olivier
> > 
> > 
> > Inactive hide details for VanCutsem,"VanCutsem, Geoffroy"
> > ---03/17/2014 01:20:46 PM---"VanCutsem, Geoffroy"
> > 
> > 
> > "VanCutsem, Geoffroy"
> >   
> > 
> > 03/17/2014 01:20 PM
> > 
> > 
> >To
> > 
> > Olivier
> > Delbeke
> > 
> > 
> >cc
> > 
> > "'ivi@lists.tizen.org'" 
> > 
> >   Subject
> > 
> > Re: No
> > apps on
> > snapshot
> > images
> > 
> > 
> > 
> > Hi Olivier,
> > 
> > I haven't played that much with the ICO HomeScreen yet so bear with
> me
> > if my explanations are inaccurate or incomplete (and

Re: No apps on snapshot images

[VanCutsem, Geoffroy]

On Mon, 2014-03-17 at 15:32 +, VanCutsem, Geoffroy wrote:
> It could be related to dual-screen... I'm going to try and load the
> exact same image that you're using to have a look at this myself.

Hmmm... I've just tried tizen_20140312.12 and tizen_20140314.6 on my
VTC7120 and I'm getting the same problem than you. It actually works
fine on a different platform that I have which uses HDMI  (using
tizen_20140314.6)... maybe this is related to using the VGA screen... I
need to investigate this more.

> 
> This second screen you're seeing is the LVDS output. This is something
> specific to the VTC7120. You can disable it as described here
> https://wiki.tizen.org/wiki/IVI/IVI_January_15,_3.0-M2-EOY#Disabling_the_LVDS_output_for_the_Nexcom_VTC7120_platforms
That bit worked for me.

Geoffroy
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: No apps on snapshot images

[VanCutsem, Geoffroy]

Hi Olivier,

On Mon, 2014-03-17 at 14:12 +0100, Olivier Delbeke wrote:
> Hi Geoffroy,
> 
> Thanks a lot for your help (once again). 
> 
> I applied the patch you recommended but got the same result
> (unfortunately). 
> 
> Using "ps", I can see the following applications are running :
> HomeScreen, OnScreen, StatusBar, dialer and MediaPlayer. I don't see
> the MediaPlayer or the dialler, and I'm not sure what "HomeScreen",
> "OnScreen" and "StatusBar" are supposed to display (but I have a black
> topbar with the time, a background image and a grey bottom bar with
> two icons). 
> 
> Is there a possibility to know in which state the running applications
> are ? (i.e. if they are hidden by AMB ? If they are drawing
> something ?) 

I don't know but this is a very good question... I hope someone can fill
us in on that.

> 
> By the way, I also modified all *.desktop files I found and all
> replaced "NoDisplay=true" by "NoDisplay=false" but it also didn't help
> (I saw in the test results that only apps with this flag should be
> displayed). 
> 
> Could my problem be related to some kind of dual-screen
> configuration ? I see that I can put my mouse cursor out of the screen
> on the right side. Maybe that's where all the icons and apps are. My
> weston.ini only has one output enabled (VGA1), however. I played with
> the setting "displayno" setting but got no improvement.

It could be related to dual-screen... I'm going to try and load the
exact same image that you're using to have a look at this myself.

This second screen you're seeing is the LVDS output. This is something
specific to the VTC7120. You can disable it as described here
https://wiki.tizen.org/wiki/IVI/IVI_January_15,_3.0-M2-EOY#Disabling_the_LVDS_output_for_the_Nexcom_VTC7120_platforms

> 
> Best regards,
> 
> Olivier
> 
> 
> Inactive hide details for VanCutsem,"VanCutsem, Geoffroy"
> ---03/17/2014 01:20:46 PM---"VanCutsem, Geoffroy"
> 
> 
> "VanCutsem, Geoffroy"
>   
> 
> 03/17/2014 01:20 PM
> 
> 
>To
> 
> Olivier
> Delbeke
> 
> 
>cc
> 
> "'ivi@lists.tizen.org'" 
> 
>   Subject
> 
> Re: No
> apps on
> snapshot
> images
> 
> 
> 
> Hi Olivier,
> 
> I haven't played that much with the ICO HomeScreen yet so bear with me
> if my explanations are inaccurate or incomplete (and I hope others on
> the mailing will correct me if that's the case)
> 
> I believe this may be a side-effect of the fact we load the
> 'ExampleSource' plugin in AMB by default (see /etc/ambd/config). This
> plugin provides random data and tends to put the overall system in
> DrivingMode which means many applications cannot be launched.
> 
> Here is what I have quickly tried this morning on the latest daily
> preview:
> - mv /etc/ambd/config /etc/ambd/config.orig
> - cp /etc/ambd/config.tizen /etc/ambd/config
> - Edit /etc/ambd/config and comment out the section related to
> 'ExampleSource'
> - Reboot the system
> 
> Let me know if that helps,
> Geoffroy
> 
> On Mon, 2014-03-17 at 10:25 +0100, Olivier Delbeke wrote:
> > Hi all,
> > 
> > The result I get when I install the daily snapshot images is quite
> > disappointing.  
> > For example, with tizen_20140312.12_ivi-mbr-i586-sdb.raw, I get a
> > screen with : 
> > - a black top bar with the time (Japan time and changing)
> > - a middle section with a sea background (with no icons on it)
> > - a bottom grey bar with two icons : a "Play" symbol and a kind of
> > numpad symbol with a red 'forbidden' sign on top of it
> > - a working mouse pointer (but clicking anywhere does not have any
> > effect)
> > 
> > However, when I look at the detailed test reports, I see that there
> > should be a Settings app, a browser, a phone app, a Multimedia
> > app, ... 
> > Why can't I see any of these ? Why is the only thing that my image
> > does is displaying the Japanese time ?
> > 
> > What I did : 
> > - download the image and dump it on my HDD
> > - boot my target (VTC7110 with a VGA display) => I get a desktop
> > environment where I can run a shell (and other apps using
> > wrt-launcher)
> > - I set up my network configuration (connman settings) 
> > - I install the ico-uxf-homescreen as described in the "sanity test
> > report"
> > - I modify the weston.

Re: No apps on snapshot images

[VanCutsem, Geoffroy]

Hi Olivier,

I haven't played that much with the ICO HomeScreen yet so bear with me
if my explanations are inaccurate or incomplete (and I hope others on
the mailing will correct me if that's the case)

I believe this may be a side-effect of the fact we load the
'ExampleSource' plugin in AMB by default (see /etc/ambd/config). This
plugin provides random data and tends to put the overall system in
DrivingMode which means many applications cannot be launched.

Here is what I have quickly tried this morning on the latest daily
preview:
- mv /etc/ambd/config /etc/ambd/config.orig
- cp /etc/ambd/config.tizen /etc/ambd/config
- Edit /etc/ambd/config and comment out the section related to
'ExampleSource'
- Reboot the system

Let me know if that helps,
Geoffroy

On Mon, 2014-03-17 at 10:25 +0100, Olivier Delbeke wrote:
> Hi all,
> 
> The result I get when I install the daily snapshot images is quite
> disappointing.  
> For example, with tizen_20140312.12_ivi-mbr-i586-sdb.raw, I get a
> screen with : 
> - a black top bar with the time (Japan time and changing)
> - a middle section with a sea background (with no icons on it)
> - a bottom grey bar with two icons : a "Play" symbol and a kind of
> numpad symbol with a red 'forbidden' sign on top of it
> - a working mouse pointer (but clicking anywhere does not have any
> effect)
> 
> However, when I look at the detailed test reports, I see that there
> should be a Settings app, a browser, a phone app, a Multimedia
> app, ... 
> Why can't I see any of these ? Why is the only thing that my image
> does is displaying the Japanese time ?
> 
> What I did : 
> - download the image and dump it on my HDD
> - boot my target (VTC7110 with a VGA display) => I get a desktop
> environment where I can run a shell (and other apps using
> wrt-launcher)
> - I set up my network configuration (connman settings) 
> - I install the ico-uxf-homescreen as described in the "sanity test
> report"
> - I modify the weston.ini to enable the VGA1 output and to avoid
> having the display rotated by 90°
> - I reboot and get what I described above
> 
> What else should I do ?
> 
> Thanks,
> 
> Olivier,
> 
> 
> ___
> IVI mailing list
> IVI@lists.tizen.org
> https://lists.tizen.org/listinfo/ivi

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: Problem cloning Tizen source

[VanCutsem, Geoffroy]

On Thu, 2014-03-13 at 06:42 +, Lv, RuiX wrote:
> > I’m considering summarizing these issues and publishing an official 
> > tips and heads-up on source.tizen.org.
> 
> I think it would be very useful to have that documented on the
> official Tizen wiki. I'd recommend you add such info (esp. related to
> tsock and
> GIT_SSL_NO_VERIFY) to the main wiki page, i.e.:
> https://source.tizen.org/documentation/developer-guide/cloning-tizen-source
> [Rui] Good point. That makes the two of us! I'm considering publishing
> it in an independent page.

I'm not sure who can edit the original page but if you cannot (I
cannot), we should create a JIRA issue so that the right folks can do
it. I think it's preferable over publishing an independant page if
that's the only additional piece of information.

Cheers,
Geoffroy

Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for the sole 
use of the intended recipient(s). Any review or distribution by others is 
strictly prohibited. If you are not the intended recipient, please contact the 
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi

Re: Problem cloning Tizen source

[VanCutsem, Geoffroy]

I am facing the exact same issue as described below by Olivier. I have
tried twice and it failed twice at the exact same point (cloning using
SSH works correctly). I have raised
https://bugs.tizen.org/jira/browse/TINF-513 to track this.

Geoffroy

On Wed, 2014-03-12 at 10:03 +, VanCutsem, Geoffroy wrote:
> Hi Rui,
> 
> On Wed, 2014-03-12 at 09:19 +, Lv, RuiX wrote:
> > Hi Oliver, VanCutsem, all Tizen enthusiasts, 
> > 
> >  
> > 
> > Thanks a lot for your active feedback.
> > 
> > I’m here sharing some tips and heads-up regarding cloning Tizen
> > source:
> > 
> >  
> > 
> > Regarding SSH configuration file
> > 
> > ==
> > 
> >  
> > 
> > l When working at home, you don’t need any proxy, so the ssh
> > configuration files for all Linux distribution versions can be unified
> > as follows:
> > 
> > Host tizen review.tizen.org
> > 
> >Hostname review.tizen.org
> > 
> >IdentityFile ~/.ssh/id_rsa
> > 
> >User 
> > 
> >Port 29418
> > 
> > l When working in a corporate environment, for example, inside intel,
> > proxy line is must-have, and you need to make a choice based on your
> > Linux distribution versions.
> > 
> > For Ubuntu, openSUSE, and CentOS, append “ProxyCommand nc -X5 -x
> > : %h %p,
> > 
> > whereas for Fedora, append “ProxyCommand nc --proxy-type socks4
> > --proxy : %h %p”.
> > 
> >  
> > 
> > Regarding Cloning through ssh/http
> > 
> > ==
> > 
> >  
> > 
> > l PRC users may find it tricky to “communicate” with google server
> > when downloading the Repo tool, initializing the repo, and
> > synchronizing Tizen source.
> > 
> >  
> > 
> > Typical confusion is: No error message is displayed when downloading
> > the Repo tool by using curl, but when proceeding to **repo init**,
> > users may find the “hidden” issue come out of nowhere. In this case,
> > keep in mind that this is an “communication” issue between PRC users
> > and google, just clear your head and try running the commands with
> > tsocks, some examples are shown below:
> > 
> > $ tsocks curl
> > http://commondatastorage.googleapis.com/git-repo-downloads/repo >
> > ~/bin/repo
> > 
> > $ tsocks repo init -u
> > ssh://@review.tizen.org:29418/scm/manifest -b tizen -m
> > ivi.xml
> > 
> > $ tsocks repo init -u
> > https://:@review.tizen.org/gerrit/p/scm/manifest 
> > -b tizen -m ivi.xml
> > 
> >  
> > 
> > l When initializing and cloning through HTTP, users may be blocked by
> > the “server certificate verification” issue, run the following command
> > and try again:
> > 
> > $ export GIT_SSL_NO_VERIFY=1
> 
> That's exactly the problem I hit when trying to clone via HTTPS this
> morning... thanks for the note!
> 
> > 
> >  
> > 
> > If you guys have other confusions, please feel free to raise it.
> > 
> > I’m considering summarizing these issues and publishing an official
> > tips and heads-up on source.tizen.org.
> 
> I think it would be very useful to have that documented on the official
> Tizen wiki. I'd recommend you add such info (esp. related to tsock and
> GIT_SSL_NO_VERIFY) to the main wiki page, i.e.:
> https://source.tizen.org/documentation/developer-guide/cloning-tizen-source
> 
> > 
> > Your comments are always more than welcome.
> > 
> >  
> > 
> > Thanks
> > 
> > Rui
> > 
> >  
> > 
> > From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org]
> > On Behalf Of Olivier Delbeke
> > Sent: Wednesday, March 12, 2014 4:03 PM
> > To: VanCutsem, Geoffroy
> > Cc: ivi@lists.tizen.org
> > Subject: Re: Problem cloning Tizen source
> > 
> > 
> >  
> > 
> > Hi Geoffroy,
> > 
> > Thank you.
> > 
> > >> I have not personnally but I know others have tried (and I will try
> > this
> > >> this morning too). The webkit-efl package is particularly large and
> > it
> > >> looks suspicious that it's stopping at exactly 1GB. Did 'repo sync'
> > >> successfully clone all the other projects before that one?
> > 
> > Yes, I confirm that all (or nearly all : progress was 880/888) other
> > projects were cloned correctly by 'repo sync'.
> > 
> > Olivier
> > 
> 

Re: Problem cloning Tizen source

[VanCutsem, Geoffroy]

Hi Rui,

On Wed, 2014-03-12 at 09:19 +, Lv, RuiX wrote:
> Hi Oliver, VanCutsem, all Tizen enthusiasts, 
> 
>  
> 
> Thanks a lot for your active feedback.
> 
> I’m here sharing some tips and heads-up regarding cloning Tizen
> source:
> 
>  
> 
> Regarding SSH configuration file
> 
> ==
> 
>  
> 
> l When working at home, you don’t need any proxy, so the ssh
> configuration files for all Linux distribution versions can be unified
> as follows:
> 
> Host tizen review.tizen.org
> 
>Hostname review.tizen.org
> 
>IdentityFile ~/.ssh/id_rsa
> 
>User 
> 
>Port 29418
> 
> l When working in a corporate environment, for example, inside intel,
> proxy line is must-have, and you need to make a choice based on your
> Linux distribution versions.
> 
> For Ubuntu, openSUSE, and CentOS, append “ProxyCommand nc -X5 -x
> : %h %p,
> 
> whereas for Fedora, append “ProxyCommand nc --proxy-type socks4
> --proxy : %h %p”.
> 
>  
> 
> Regarding Cloning through ssh/http
> 
> ==
> 
>  
> 
> l PRC users may find it tricky to “communicate” with google server
> when downloading the Repo tool, initializing the repo, and
> synchronizing Tizen source.
> 
>  
> 
> Typical confusion is: No error message is displayed when downloading
> the Repo tool by using curl, but when proceeding to **repo init**,
> users may find the “hidden” issue come out of nowhere. In this case,
> keep in mind that this is an “communication” issue between PRC users
> and google, just clear your head and try running the commands with
> tsocks, some examples are shown below:
> 
> $ tsocks curl
> http://commondatastorage.googleapis.com/git-repo-downloads/repo >
> ~/bin/repo
> 
> $ tsocks repo init -u
> ssh://@review.tizen.org:29418/scm/manifest -b tizen -m
> ivi.xml
> 
> $ tsocks repo init -u
> https://:@review.tizen.org/gerrit/p/scm/manifest -b 
> tizen -m ivi.xml
> 
>  
> 
> l When initializing and cloning through HTTP, users may be blocked by
> the “server certificate verification” issue, run the following command
> and try again:
> 
> $ export GIT_SSL_NO_VERIFY=1

That's exactly the problem I hit when trying to clone via HTTPS this
morning... thanks for the note!

> 
>  
> 
> If you guys have other confusions, please feel free to raise it.
> 
> I’m considering summarizing these issues and publishing an official
> tips and heads-up on source.tizen.org.

I think it would be very useful to have that documented on the official
Tizen wiki. I'd recommend you add such info (esp. related to tsock and
GIT_SSL_NO_VERIFY) to the main wiki page, i.e.:
https://source.tizen.org/documentation/developer-guide/cloning-tizen-source

> 
> Your comments are always more than welcome.
> 
>  
> 
> Thanks
> 
> Rui
> 
>  
> 
> From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org]
> On Behalf Of Olivier Delbeke
> Sent: Wednesday, March 12, 2014 4:03 PM
> To: VanCutsem, Geoffroy
> Cc: ivi@lists.tizen.org
> Subject: Re: Problem cloning Tizen source
> 
> 
>  
> 
> Hi Geoffroy,
> 
> Thank you.
> 
> >> I have not personnally but I know others have tried (and I will try
> this
> >> this morning too). The webkit-efl package is particularly large and
> it
> >> looks suspicious that it's stopping at exactly 1GB. Did 'repo sync'
> >> successfully clone all the other projects before that one?
> 
> Yes, I confirm that all (or nearly all : progress was 880/888) other
> projects were cloned correctly by 'repo sync'.
> 
> Olivier
> 
> 
> Inactive hide details for VanCutsem,"VanCutsem, Geoffroy"
> ---03/12/2014 08:55:18 AM---"VanCutsem, Geoffroy"
> 
> 
> "VanCutsem, Geoffroy"
>  
> 
> 03/12/2014 08:55 AM
> 
> 
> 
> 
>To
> 
> 
> 
> 
> Olivier Delbeke
> 
> 
> 
> 
> 
>cc
> 
> 
> 
> 
> "ivi@lists.tizen.org" 
> 
> 
> 
> 
>   Subject
> 
> 
> 
> 
> Re: Problem
> cloning Tizen
> source
> 
> 
> 
>  
> 
> 
> 
> 
> 
> 
> 
> 
> 
> Hi Olivier,
> 
> On Wed, 2014-03-12 at 08:20 +0100, Olivier Delbeke wrote:
> > Hi Geoffroy,
> > 
> > Thanks a lot for your help. 
> > 
> > I took my PC at home and there, the SSH connection went just fine
> > (same result as you) and I could finalize the cloning. So the port
> > 29418 must be blocked here by our ICT.