Hi all!
I suppose this is a basic question but I am not able to get it.
The query I wud like to raise:
What is the difference between Voip & Internet Telephony?Are they different
jargons used to mean the same thing or both jargons mean different things?
Can someone explain these two terms?
Thanx
Congratulation Scott Chapin
HATO
>From: "Amir Azhar Jamaluddin"
>Reply-To: "Amir Azhar Jamaluddin"
>To: [EMAIL PROTECTED]
>Subject: RE: Passed CCIE Written! [7:45881]
>Date: Wed, 5 Jun 2002 22:58:25 -0400
>
>Congratulation on your success. May you do well in the lab too.
>
>Bravo
>
>-nict-
>
Hi Hosui,
I run a website with Study guides for most of the certs located at
http://www.gdd.net
Clayton Dukes
Cisco Info Center SE
CCNA, CCDA, CCDP, CCNP, NCC
- Original Message -
From: "Hosui Tse"
To:
Sent: Thursday, May 30, 2002 12:53 AM
Subject: Materials on Internet. [7:45426]
>
Also, these cards are brand new, 16meg jobbies.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=45913&t=45833
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosu
Instead of all crying, just go and sit the exam. Who cares if your
registered for 5x or 6x, you honestly thing they are different?
The CCNP exams are a joke they are that easy, and if havent changed for 6xx
then I'm really disappointed in Cisco.
Is BRI and PRI different in how they are composed?
I've got a Franken pix, compelte with 16meg card, PII 450, 128meg Ram, dual
Intel nics and it works fine.
I have a few PIX 16meg Cards available at $550USD. I'm located in Australia
and will ship internationally. Please contact me directly on
[EMAIL PROTECTED] if you are intrested. $550 + postage
If you notice the requirements you must meet as listed in the
tracking system it shows 4xx, 5xx, and 6xx.
""Tshepo Kowane"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> What about some us with 2 down and 2 go and not yet registered for the
> remaining exams . Do we have to s
nope
www.cisco.com/warp/public/110/19b.html
""Anil Kumar"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi All,
>
> Does the PIX FW support secondary ip address option for the
> interface, as in Cisco router ethernet interface?
>
>
>
> Thanks in Advance for the reply.
>
> Re
Thanks for the advertising. I'm sure you don't work for them. lol
""Dain Deutschman"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Check out www.hellocomputers.com or contact someone there 877-79 HELLO
They
> have a great LAB book and www.ciscopress.com Suggested reading ma
Using the master command reference seems to help find a lot of things. If
you order any new equipment they will give you a copy of the CD so go check
your old boxes. Just remember that the CD in the lab may not necessarily be
new. It's not unusual to have a CD that is a year old.
""Hunt Lee""
I don't think simply using static routes is sufficient. You would need to
use policy based routing and route maps to be able to route based on source
addresses.
Clayton
""Wayne Jang"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
> I think this will work:
> I have a cus
Well that is why I sent the e-mail just to you and not everyone on the
group.
Not everyone has the 100m connection but there are quite a few who do.
Your explanation is a bit more clear now. When I saw 608 and 128 I
thought it had to be K even though it was a bit slow for DSL. But hey!
You
Congratulation on your success. May you do well in the lab too.
Bravo
-nict-
-Original Message-
From: scott chapin [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 06, 2002 8:21 AM
To: [EMAIL PROTECTED]
Subject: Passed CCIE Written! [7:45881]
Hello All - I passed the routing and switch
I wrote the now very old document for this exam at www.cramsession.com, it's
free and you might find it useful as a place to start.
On my home site I've published a list of corrections for the cramsession,
and posted a few other documents covering RIFs, the boot sequence and a few
other commonly
That's Konnichi wa!
And yes, Foundations is still available in 640-500.
Theo
"Lee James"
Sent by: [EMAIL PROTECTED]
06/06/2002 11:25 AM
Please respond to "Lee James"
To: [EMAIL PROTECTED]
cc:
Subject:RE: It's Official - CCNP 6xx series [7:45867]
Let me just make one point.
""Neal Rauhauser 402-301-9555"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I recently asked who was doing CCIP and got a raft of responses - "Its
> just like the CCNP", "Just got get your CCIE", "It doesn't make sense".
>
> Rather than continui
Hai,
I just reregister my BSCN Exam to 14/06/02, so far the Prometric did not
advice me that the old exam is gone. If I look at Cisco web and did not
find any info regarding the new 6xx. I still have 3 paper to go. How can I
confirm this with Cisco.
Thanks
Message Posted at:
http://www.g
You can still take the 640-500 series for CCNP. You just have to take it in
Japanese. Kanichiwa!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=45900&t=45867
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/
Statics.
"itsme"
Sent by: [EMAIL PROTECTED]
06/06/2002 09:29 AM
Please respond to "itsme"
To: [EMAIL PROTECTED]
cc:
Subject:Re: Design question concerning Pix, DSL, and Frame
T1 [7:45857]
Yes, using statics.
""Wayne Jang"" wrote in message
[EMAIL
Yeah I agree with Michael. Personally I like Quake 2 and Age of Empires
II.
If not that then I nice book reading of Romans, Hebrews, Calvin or St.
Augustine does the trick sometimes.
A long bike ride? The gym? I am studying for the CISA and just had to go
to the gym and rode my cannondale f
Just register for the 600 series exams of the last 2 tests you need to
complete for your CCNP, and you will be set. The most recent old
versions of the exams have always counted toward the certification track
when Cisco has upgraded to a new version of exams.
Mark
-Original Message-
Fro
I recently asked who was doing CCIP and got a raft of responses - "Its
just like the CCNP", "Just got get your CCIE", "It doesn't make sense".
Rather than continuing that thread I thought I'd highlight the
differences and mention why the CCIP is more interesting than CCIE in
many cases.
Th
What about some us with 2 down and 2 go and not yet registered for the
remaining exams . Do we have to start all over again or register for the
2 new exams to complete the CCNP.
>>> "Marko Milivojevic" 06/06/02 01:06AM >>>
Official indeed:
http://www.cisco.com/warp/public/10/wwtraining/whats_
Yes, using statics.
""Wayne Jang"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
> I think this will work:
> I have a customer that would like to use two connections to the Internet
> (one sdsl and one frame)
> I want the two servers to use the DSL for Internet and the 20
I am. Should be interesting. If there's already a meeting place for those
of us attending, I'd like to know so I can be there, too.
Ken
>>> "Oleg Oz" 06/05/02 03:44PM >>>
I think I saw a thread on this a few weeks ago but can no longer find it..
Is anyone going to networkers in San Diego.. Ta
Hello All - I passed the routing and switching exam today. I wanted to pass
on a big thanks to the group. You all have been very helpful.
I used:
Cisco Certified Internetworking Expert by Sybex
Boson practice exams
Token Ring paper by Lou Rossi
www.cisco.com, www.cisco.com, and www.cisco.com
Looks like we have a "training" issue at Prometric. The woman
I talked to said "Congratulations, You Passed."
looking out for the mailman,
-R.Monroe
CCNP#4576243971.5
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=45889&t=45853
--
Just wondering what everyone is using to study for this exam. I took the
class and passed 3.0 but unfortunately this does not count for the ip
telephony specialization.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=45888&t=45888
Official indeed:
http://www.cisco.com/warp/public/10/wwtraining/whats_new/
Effective June 5, 2002 refreshed versions of exams for CCNP, CCDP, and CCIP
certifications with all-new questions are available. Routing, Switching,
Remote Access, Support, and BSCI exams have all been updated to better
Just to rule out the "smack yourself on the head if you realise you've
done this" reason - don't suppose the image has been ftp'd from one box to
another somewhere along the line? And transferred as ascii in the
process?
Speaking from experience (yes, I smacked myself on the head when I
reali
I think I saw a thread on this a few weeks ago but can no longer find it..
Is anyone going to networkers in San Diego.. Taking power sessions?
Oleg.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=45885&t=45885
--
FAQ, list a
Windows or Unix ?
On Windows, go to "Control Panel / Services" and stop
process "CMF syslog service".
Sasa
CCIE #8635
Jeffrey Reed wrote:
>
> Is there a way to turn off the syslog facility temporarily in
> Ciscoworks2000?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=458
I have to ask why go through the heartache of building something like this?
oh yes, it can be done.. but the 501 *new* is 425 delivered and is running
6.1 About the only thing that I have found it wont do is redundent
failover(no port) and a *real* DMZ again because of the 2 port limit. If you
ar
I logged into Prometric, and the new exams were not available to register
for. Might try registering online to get the old exams.
""Jeff Harris"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I hope that because I signed up for the old exams on Monday (Switching on
> Friday,
>
Talking about...
I was sent this link earlier today - cool site...
http://www.arcadepod.com/games/
(In case the link is removed, the site is www . arcadepod . com / games)
Take care,
Ole
~
Ole Drews Jensen
Systems Network Manager
CCNP, MCSE, MCP+I
I hope that because I signed up for the old exams on Monday (Switching on
Friday,
Support on the 28th), I'll still take the old exams. :)
--
Jeff Harris - Cisco/Unix Engineer
CCNA, CCNP Routing, Remote Access Passed
On Wed, Jun 05, 2002 at 05:22:23PM -0400, Kaminski, Shawn G wrote:
> Just cal
Funny you should mention that. I took the last exam on June 3, and my CCNA
expired on June 4. Today (June 5) I checked the online tracking system and
it shows me as CCNP through June 3,2005. It appears you CAN wait to the
last minute...
""Rick"" wrote in message
[EMAIL PROTECTED]">news:[EMAI
Just for clarification, are you saying your topology is this?? :
7960 IP Phone -- 3002 Concentrator -- DSL Modem -- Internet -- VPN term.
pt.
Is the DSL connection Synchronous?? Or is it like 768k up / 1.0mb down?
How many hops are there between you and the VPN Termination point?
Thanks,
Mark
That's fine, but could some of the beta takers tell us miserable
candidates about the difference between 500 and 600?
I have been patiently waiting for this since the last post on
subject by Ather :-)
Marko.
> -Original Message-
> From: Kaminski, Shawn G [mailto:[EMAIL PROTECTE
You have totally misunderstood what I was saying, and it was in my
original email I hope no one else took it this way and just think I am a
total idiot. My company where the vpn concentrators are located has 2
ds3's to the internet, that is 45mb on each ds3 with a total 90mb to the
net. What we us
hey, what is meant by "like to change their minds".
I am going to give CCNP-Support exam next tuesday(06/11)
Does it mean I can expect 6xx series exam.. I registered for 5xx series last
week.
- Original Message -
From: Mark Villanova
To:
Sent: Wednesday, June 05, 2002 2:39 PM
Subject:
Does anyone want to admit to taking the beta calling prometric and getting
an F???
My attitude is much like yours. I also took the exam just to get a sample. I
never expected to pass! (It would be nice but...)
Either way ... Break a leg or something.
Oleg.
Message Posted at:
http://www.gro
Hi all!!!
Not to break everyone's bubble but...
I spoke with someone at Prometric who checked with a manager and many times
they will arbitrarily fill in the pass/fail field with p's (or f's) before
they even get the results. No good reason for this other than they needed
to have a value in the
I like to drink Beer, Bier, Biere, Birra, Cerveja, Cerveza... :)
Dave
Morgan Hansen wrote:
>
> RGH!!!
>
> Im sorry, but is there anyone out there that might have some good
> thoughts on what to do when you feel like your loosing it, going
> slightly maaad and just cant take it any mo
Look at the bright side Morgan, if you knew everything there was to know,
and things wouldn't change in the future, your life would be pretty boring
in 5-10 years from now. That's what make life as a 'computer/network nerd'
exciting and challenging. But, you're right - it can be a little frustrat
Anyone already registered for an exam can still take the 5xx until the 14th.
But they like to change their minds. So expect the 6xx
-Original Message-
From: Kaminski, Shawn G [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 05, 2002 4:22 PM
To: [EMAIL PROTECTED]
Subject: It's Official - C
There are some online games where you can shoot stuff..
Get a copy of Quake 3 or any of those first person shooters. great way
to get it out =)
Mike W.
"Morgan Hansen" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> RGH!!!
>
> Im sorry, but is there anyone out t
I would compare your downloaded image against the checksum (MD5, BSD,
etc) posted on CCO. That would at least tell you if your image is
corrupt or not. Then you could try copying the file over another way.
HTH,
Nick
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On
Just called Prometric and VUE for information on when they're switching to
the new CCNP 6xx series exams. As of this afternoon, 6/5/02, the CCNP 5xx
series exams are no longer available.
Shawn K.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=45867&t=45867
-
Hamid,
I am also planning to take the exam before the end of this month and before
Cisco brings the new monster test on line. I have read all the books that
you mention here except, CCIE LAN Switching ,by Hamilton
I am also doing the Boson practice#3 and have the CCXX material. I am sure
you know
Is there a way to turn off the syslog facility temporarily in
Ciscoworks2000?
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=45866&t=45866
---
RGH!!!
Im sorry, but is there anyone out there that might have some good
thoughts on what to do when you feel like your loosing it, going
slightly maaad and just cant take it any more?! Studying studying
studying. No matter how much you read, its never ever enough :(
-Morgan
Messag
I talked to Prometric and they said that we need to wait for Cisco to
re-score these beta exams and that our final score would be mailed to us. I
also showed a pass for this exam and found it hard to believe since I was
more interested in what was on it than in actually passing it. I didn't even
s
I have seen this caused by a bad TFTP server of all things, as well as by a
bad download. Try to re-download and then try 3CDeamon, the best thing EVER
put out by 3Com! :)
ftp://ftp.3com.com/pub/utilbin/win32/3cdv2r10.zip
Hope that helps!
Tim
CCIE 9015
-Original Message-
From: [EMAIL
You could also try copying the file via FTP. Since FTP is a TCP protocol it
has some reliable built into it. I've copied images via TFTP where it told
me it was successful, but when I reloaded it came up in rommon and dir
flash: said bad checksum. Command is copy ftp flash:
Message Posted at
I bought a TLS-4 from ebay for the purpose of studying for DDR. It's great
and you have 4 ports on it (they make a 5 port version too I think) so
therefor, 4 cheapy USR modems off of ebay and make yourself a couple of
cables and you can multiple devices able to call each other without much
messin
The Lab Scenarios from CCBootcamp cost a lot more than $150 (and are
supposed to be very good-- I chose Ipexpert lab scenarios mainly because
they use a topology that more closely fits my home lab). I think you must
be looking at the price of their CCIE Written Exam preparation material. I
just
Had a similar problem with a 1720. Put in a new flash and still no
work. I have just received my new 1720 and it is up an running.
Dave
kevhed wrote:
>
> Looking for some help. I'm trying to download (tftp) a new ios image on my
> 2503 and after repeated attempts, I continually get a check
""Oleg Oz"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I took the CCIE beta exam at the begining on May (a day beofore the
> end) and could wait no more. I called prometric to see if they had a grade
> in thier system, they told me that thier system showed a "P" for pass (I
>
Hi,
I think this will work:
I have a customer that would like to use two connections to the Internet
(one sdsl and one frame)
I want the two servers to use the DSL for Internet and the 20 users could
use the Frame T1 (no BGP, not load balanced).
I want to use a Cisco 1720 with a serial wic for F
Try to download another version of the same image or a another image
alltogether. Your image may corrupted.
Oleg.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=45858&t=45856
--
FAQ, list archives, and subscription info: htt
Looking for some help. I'm trying to download (tftp) a new ios image on my
2503 and after repeated attempts, I continually get a checksum error after
each download. I've changed the config-register to 0x2101 so that the flash
will switch to Read/Write prior to downloading. I've tried 3 separate
Oh, if you are in Europe - good luck finding suitable frame.
Marko.
> -Original Message-
> From: Ole Drews Jensen [mailto:[EMAIL PROTECTED]]
> Sent: mipvikudagur, 5. jznm 2002. 18:15
> To: [EMAIL PROTECTED]
> Subject: RE: CCNP Welcome Aboard kit? [7:45454]
>
>
> I think it's about 4-6
Assuming I pass the 506 this week end will I need to sign up for the new
CCNP track right away.
-Original Message-
From: Ole Drews Jensen [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 05, 2002 2:15 PM
To: [EMAIL PROTECTED]
Subject: RE: CCNP Welcome Aboard kit? [7:45454]
I think it's
I took the CCIE beta exam at the begining on May (a day beofore the
end) and could wait no more. I called prometric to see if they had a grade
in thier system, they told me that thier system showed a "P" for pass (I
called twice to confirm.) Cisco's system does not show anything yet (I know
it can
I think it's about 4-6 weeks, so don't run out like a maniac to buy a frame
for it today :-)
Ole
~
Ole Drews Jensen
Systems Network Manager
CCNP, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~
http://www.RouterChief.com
about 2 - 3 weeks, but I hope your CCNA didn't expire? You said three years
and that is the time frame to get recertified in or obtain the CCNP.
""Steve Ringley"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> How long does it normally take for Cisco to send the paper cert out a
The DFW Cisco Users group doesn't seem to want to list this study group so I
thought I'd post it here. We have a group that is just finishing up the
BSCN/BSCI and will shortly be moving on to the BCMSN an will continue
through BCRAN and CIT. We need more people to get the most out of it since
we
Normally , It's right way, but sometime is depend on your experience and
target
- Original Message -
From: "Paulo Roque"
To:
Sent: Wednesday, June 05, 2002 11:52 Chia;u
Subject: CCNP exam path question [7:45839]
> Hi all,
>
> Must the exam path for CCNP be Routing, Switching, Remote A
How long does it normally take for Cisco to send the paper cert out after
passing the last exam? I passed the Support exam yesterday, which completed
my CCNP. I seem to recall a sevearl week wait three years ago for my CCNA
paper cert.
""Kris Keen"" wrote in message
[EMAIL PROTECTED]">news:[EM
What ever order you like.
Ole
~
Ole Drews Jensen
Systems Network Manager
CCNP, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~
http://www.RouterChief.com
~
Need a Job?
http://www.OleDrew
I am running iP telephony at home over a hardware vpn
3002, with a cisco 7960 ip phone. Using dsl to my provider
at 1.0 mb and the telephony works just fine.
Larry Letterman
Cisco Systems
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
You can take it any way you want, but most people take it the way you
mention (or at least I did)
Good luck
Reza
""Paulo Roque"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> Must the exam path for CCNP be Routing, Switching, Remote Access and
Support
> or the exam
The support seems to encompass a lot of all of the others so I took that
last. It worked for me, but who knows?
Bill Mckenzie
MCP+I,MCSE,CCNA,CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=45843&t=45839
--
FAQ, list archives
In article ,
[EMAIL PROTECTED] says...
> Hi all,
>
> Must the exam path for CCNP be Routing, Switching, Remote Access and
Support
> or the exams could be taken in any order?
>
> Thanks in advance!!
>
> --
> Eng. Paulo Roqu
Once is a project, I was using CAR on a 7200 with 5 Fast etherner
sub-interfaces. I was using various access-lists (all of them were
Extended). CAR was limiting bith Recieving and Transmitting (SEND) traffic.
With No NPEs or additional modelus installed, the CPU time went to 40-50% in
peek times.
Hi all,
Must the exam path for CCNP be Routing, Switching, Remote Access and Support
or the exams could be taken in any order?
Thanks in advance!!
--
Eng. Paulo Roque
Network Engineer
Cisco Certified Network Associate
[EMAI
Hi,
I have a VoIP gateway and a Radius server. The Radius server is used to log
the voice calls in its accounting log. Here is the gateways configuration:
!
aaa accounting connection default start-stop group radius
!
gw-accounting h323
gw-accounting voip
!
radius-server host 10.10.100.23 auth-po
But you can assign the Privilege level 2 to see the startup-config.
Hamid
""Jimmy"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all :
>
> I have set a username "test" with privilege 2 for
> "show running-config".
>
>However when I login using "test" and perform sho
Hi,
I am studying for the written exam and I am going to take the exam in 3 or 4
weeks.
I have used the following books:
- CCIE LAN Switching ,by Hamilton
- Routing TCP/IP Vol. 1, by Doyle
- Routers, Switches & Bridges for CCIEs, by Caslow
- Some other matterials such as Exam Cram ,
I was w
Try TTCP
Hamid
""Ashok C. Braganza"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Can anyone tell me, how to check bandwidth, here is my router conf (
> bandwidth 128) How to verify? Is there any cisco command?
>
> interface ATM0/0
> no ip address
> atm vc-per-vp 256
>
I'm interested in building a PIX out of a PC. The only
problem is finding an affordable 16MB Flash ISA Card.
Cisco's part number PIX-FLASH-16MB. The cheapest I can
find is $700. For that I could buy a used 506. Does
anyone know of a more affordable solution? Is their a
generic card that can be mod
I'm using a Cisco 3000 concentrator with a Cisco 3002 harware client for the
vpn. 1.5mb on each side...
Between NY and Malaysia. Nobody thought we would be able to put voice over
this VPN. We can get 2 voice calls at a time with great quality 13,000
miles :-)
We arent even using new top of the
Both sides send DDPs. The "more" bit is used in the exchange for each side
to inform the other if it has more information to send. See Doyle VOL. 1
for a good description of this process.
HTH,
Scott
CCIE #9340
""thinkworker"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> In
Whenever you are using the rif end to end.
""Nijhawan Akshay"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Does anyone know in what scenarios you need to configure 'multiring all'
on
> a token ring interface connected to the Cat 3900?
Message Posted at:
http://www.groupst
I found it. They probably can help you out
pad pad
pad
p
http://www.netoptics.com
--
RFC 1149 Compliant.
""Steven A. Ridder"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> In Network World (the magazine), if you can get your hands on one, is a
> company who sells "boxes"
That's the right CD, but a little out dated. You can use the most current
info. right of CCO by going to "technical documentation". The search
function is horrible so I would suggest learning exactly where things are.
HTH,
Scott
CCIE #9340
""Hunt Lee"" wrote in message
[EMAIL PROTECTED]">news
The slave sends his/hers after.
--
RFC 1149 Compliant.
""thinkworker"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> In the master/slave synchronize procedure, the master will send its DDP
> (database description packet) while slave only accept and reply with
> LDR(linkstat
Jimmy,
When you use the password with the privilege commands
you see parts of the running-config that privilege
level 2 commands are able to configure. Which probably
is nothing.
Refer to this link for assist
Debbie
http://www.cisco.com/warp/public/63/showrun.shtml
--- Jimmy wrote:
> Hi
In Network World (the magazine), if you can get your hands on one, is a
company who sells "boxes" to do the conversions. You have no QoS though.
It will just dump the gig into the box and stuff has to wait until the 100
MB side can send. If you need decent QoS, get a 2950 or 3550.
--
RFC 1149
It works, but you're at the mercy of the internet because of no SLA's.
mincir, etc. There's supposed to be a design guide for Voice over IP VPN's
comming out from Cisco in a few weeks. The same guy writing that is giving
the Networkers class in a few weeks, which will be on the web after that.
Yo
Hello,
I have a Cisco Router 805 and a multitech ISDN TA/NT1 MTA128-NT.
According to references Cisco 805 is a TE2 and MTA128-NT is TA/NT1. I am
using a RS-232 - V35 SSI cable between devices. But I couldn't find any
configuration guidelines for this setup.
Is it possible to dial over an ISDN l
Sorry,
http://www.cisco.com/go/cic
Clayton Dukes
CCNA, CCDA, CCDP, CCNP, NCC
- Original Message -
From: "Kevin Wigle"
To: "Clayton Dukes" ;
Sent: Wednesday, June 05, 2002 12:03 AM
Subject: Re: Identifying Hosts [7:45795]
> Unknown referrer
> you should notify the [EMAIL PROTECTED]
>
all,
this technically isn't a cisco question, but i've been a long-time reader and
this is a puzzle eluding solution thus far so i thought i would try. i also
find it somewhat intriguing.
we're connected to our upstream provider via a t-1 (we're a software house).
per mrtg we use around 400kbps
Hi group,
have anybody experience with VoIP over VPN???
Any suggestions would be appreciated
thanks in advance
Orest
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of Orest.Umudumov.vcf]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=45819&t=4
Hi all :
I have set a username "test" with privilege 2 for
"show running-config".
However when I login using "test" and perform show
running-config ; only 1st line and last line of the
configuration can be seen. Any idea ?
username cisco password 7 104D000A0618
username test privilege 2 p
Can some one point out the differences between the 640-60x and 640-50x
(CCNP) exams.
1- Are there any additions to objectives?
2- Do the new exams require understanding in any additional concepts? Will
we be able to use the old books to prepare for the new exams
Regards,
Ather
-Origina
All,
I want to start practising on how to search / use the Cisco's Documentation
CD for the CCIE Lab. I have 2 CDs called Cisco Product Documentation (Oct
2001). Are they the ones?? If not, how about can I order the Cisco's
Documentation CD from Cisco?
Thanks,
Hunt Lee
Message Posted at:
Morning,
have anybody experience with VoIP over VPN???
Any suggestions would be appreciated
Cheers
Orest
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of Orest.Umudumov.vcf]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=45814&t=44693
---
99 matches
Mail list logo