to do still.
I pushed your updated version to git.linuxcnc.org as a branch called
'seb/master/ftkalcevic-axis-estimate', for wider testing and in case you
want to refine the code.
--
Sebastian Kuzminsky
, and
send us an email with the links.
--
Sebastian Kuzminsky
--
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit
controller, disconnected from actual motion, and see how long the
motion actually takes. That's probably possible, but it's not a small
change to design implement.
--
Sebastian Kuzminsky
--
Meet PCI DSS 3.0
On 10/01/2014 04:38 AM, John Thornton wrote:
When is the fest?
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?LinuxCNC_Fest_2014
I hope you can make it!
--
Sebastian Kuzminsky
--
Meet PCI DSS 3.0 Compliance Requirements
bug reports from you, and if you want to
i'd be happy to show you how to make the changes yourself and send them
to us - this way you'd get the attribution for the improvements more
clearly. Either way you want to do it is fine by me.
--
Sebastian Kuzminsky
that and send any questions you have to the emc-developers list.
Also consider joining us on IRC for chatting in real time (details are
in the document above).
Welcome aboard!
--
Sebastian Kuzminsky
--
Meet PCI DSS 3.0
information. Should this read 20,000 like the
image, or should the image be fixed to reflect 200,000.
Can you see if this is fixed and less confusing in 2.6.3-24 (currently
on the linuxcnc.org/docs website)?
--
Sebastian Kuzminsky
without one so far.
Seems like it would be handy.
I thought we had a demux component, but the closest i could find is select8.
--
Sebastian Kuzminsky
--
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
it is OK to pass along corrections.
Thanks for the bug report! This mailing list is a fine place to report
bugs.
I will fix it.
--
Sebastian Kuzminsky
--
Slashdot TV. Video for Nerds. Stuff that Matters.
http
On September 19, 2014 9:07:32 AM MDT, Sebastian Kuzminsky s...@highlab.com
wrote:
On 9/17/14 1:58 PM, Joe Hildreth wrote:
Hello,
I was reading through the Getting Started V2.6.3-19-g06655d0,
2014-09-16 manual.
Section 4.6 Mechanical Information.
In the first example calculation, the text
the debian
archive at linuxcnc.org. On your linuxcnc machine it should be enough
to run sudo apt-get install truetype-tracer.
--
Sebastian Kuzminsky
--
Want excitement?
Manually upgrade your production database.
When you want
I booked my tickets to the hackfest. I fly into Houston on the morning
of Friday the 17th and fly out in the evening of Tuesday the 21st.
Hope to see you all there!
--
Sebastian Kuzminsky
--
Want excitement
in 2.6.3 were:
Chris Morley
Chris Radek
Dewey Garrett
Francis Tisserant
Jeff Epler
John Thornton
Norbert Schechner
Sebastian Kuzminsky
--
Sebastian Kuzminsky
--
Slashdot TV.
Video for Nerds. Stuff that matters.
http
files
for each CNC machine. But you can still only run one at a time.
--
Sebastian Kuzminsky
--
Slashdot TV.
Video for Nerds. Stuff that matters.
http://tv.slashdot.org
with the base
thread enabled as the abs component takes a float for input and output.
Any ideas?
Hard to tell without seeing your hal config.
Did you addf the abs function to the proper place in the proper thread?
--
Sebastian Kuzminsky
On 8/12/14 9:14 AM, Marius Liebenberg wrote:
On 2014-08-12 17:08, Sebastian Kuzminsky wrote:
Did you addf the abs function to the proper place in the proper thread?
I get an error if I do addf so I left it out. I can see the function in
the list of halshow though. Does that mean
: fix startup code example
* docs: misc minor fixes
* sample configs: fix sim/axis/gantry backplot display
Thanks as always to the people who worked on this release:
Chris Morley
Chris Radek
Dewey Garrett
Francis Tisserant
John Thornton
Sebastian Kuzminsky
--
Sebastian Kuzminsky
improvements.
Thanks to the people who contributed code to this release:
* Chris Radek
* Chris Morley
* Jeff Epler
* John Thornton
--
Sebastian Kuzminsky
--
Infragistics Professional
Build stunning WinForms apps today
On July 31, 2014 6:02:17 AM MDT, John Thornton bjt...@gmail.com wrote:
Hi Seb,
I think the link http://linuxcnc.org/docs/html/ should point to 2.6.0
docs now.
I just changed it.
Was it you that updated the www.linuxcnc.org front page? If so, thanks!
--
Sebastian Kuzminsky
updated, and is currently
the preferred way to make fresh installs of LinuxCNC 2.6.
--
Sebastian Kuzminsky
--
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications with our WinForms
on Linux
and the price is not unreasonable.
I'm pretty happy with FreeCAD. It works and the price is even less
unreasonable.
--
Sebastian Kuzminsky
--
Infragistics Professional
Build stunning WinForms apps today
/gmane.linux.distributions.emc.user/52401
Thanks to the many, many people who have contributed to this effort by
writing code, testing, reporting bugs, and helping each other on the
mailing lists, forums, and IRC.
Here's to many more years of progress together.
--
Sebastian Kuzminsky
On 07/23/2014 12:55 AM, Steve Blackmore wrote:
Just searched for it in Wiki --- Buildbot page errors with
Service Temporarily Unavailable
Good start.
I took it down this evening for an upgrade, to add more disk. It's back
now.
--
Sebastian Kuzminsky
and to the developers who contributed to this
pre-release:
Andy Pugh
Bas de Bruijn
Chris Morley
Chris Radek
Francis Tisserant
Jeff Epler
John Thornton
Norbert Schechner
--
Sebastian Kuzminsky
--
Want fast and easy access
image (see the email from Chris Radek
in this thread) to a USB stick:
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Hybrid_Iso
Hope this helps!
--
Sebastian Kuzminsky
--
Want fast and easy access to all the code in your
this one: http://zero-divide.net/index.php?page=fswizard
But i'd much prefer to have an open-source locally-runnable speed/feed
calculator like yours...
--
Sebastian Kuzminsky
--
Want fast and easy access to all the code
hasn't been loaded yet?
--
Sebastian Kuzminsky
--
Want fast and easy access to all the code in your enterprise? Index and
search up to 200,000 lines of code with a free copy of Black Duck#174;
Code Sight#153; - the same
this stuff. Maybe, just maybe, it might be more stable...
Which kernel are you running? Ie, what's the output of uname -a?
--
Sebastian Kuzminsky
--
Want fast and easy access to all the code in your enterprise? Index
Axis
behavior there.
--
Sebastian Kuzminsky
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
/Contributing-to-LinuxCNC.html
--
Sebastian Kuzminsky
--
Open source business process management suite built on Java and Eclipse
Turn processes into business applications with Bonita BPM Community Edition
Quickly connect
.
The alternative is to MDI the M03 then run-from-line
Or (in Axis) hit F9 to start the spindle, then run-from-line.
--
Sebastian Kuzminsky
--
Open source business process management suite built on Java and Eclipse
Turn
?
comp was recently renamed (in master, not in 2.5 or 2.6) to halcompile.
Is your customer on master?
--
Sebastian Kuzminsky
--
Open source business process management suite built on Java and Eclipse
Turn processes
, and Wheezy?
--
Sebastian Kuzminsky
--
HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
Find What Matters Most in Your Big Data with HPCC Systems
Open Source. Fast. Scalable. Simple. Ideal
!
On 6/12/2014 2:28 AM, Steve Blackmore wrote:
If so, why the delay to 2.7 and not put it in 2.6?
It's not in 2.6 because 2.6 is too close to release to introduce such
deep changes.
--
Sebastian Kuzminsky
--
HPCC
:
Bence Kovacs
Chris Morley
Chris Radek
Curtis Dutton
Dewey Garrett
Jeff Epler
John Thornton
Kim Kirwan
Norbert Schechner
Sebastian Kuzminsky
--
Sebastian Kuzminsky
--
HPCC Systems Open Source Big Data Platform from
!
--
Sebastian Kuzminsky
--
HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
Find What Matters Most in Your Big Data with HPCC Systems
Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
Leverages
the coding and debugging, and to
Sam Sokolik and others for relentless testing.
Brave users of the master branch! Please keep an eye on your machines
and let us know if they misbehave in any way. (And let us know if your
machines run better than before!)
--
Sebastian Kuzminsky
On 6/10/14 11:43 , a k wrote:
i did add this file also
have error
...
Debug file information:
...
hm2-servo.hal:205: Can't find module 'scale=1' in
/usr/realtime-2.6.32-122-rtai/modules/linuxcnc
That's your error ^^
You made a typo in your hal file.
--
Sebastian Kuzminsky
On 6/10/14 12:17 , a k wrote:
i need have
loadrt scale count=1
forgot count
and now i have
/
Ok, so read the error message.
Which line number is it telling you your bug is on?
What does that line say, and what should it say?
--
Sebastian Kuzminsky
=0c07d0618e4c9a4b2509f4e68cc14303a2097586;hb=03a1c19f22d71c2ea4d1b81137b7750350b69600
1: http://highlab.com/~seb/linuxcnc/scorbot-er-3/1024131507a.jpg
--
Sebastian Kuzminsky
--
HPCC Systems Open Source Big Data Platform
:
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?UpdatingTo2.6
--
Sebastian Kuzminsky
--
Learn Graph Databases - Download FREE O'Reilly Book
Graph Databases is the definitive new guide to graph databases and their
applications
Tucker desires.
I would be happy to review a patch against master that adds this pin.
--
Sebastian Kuzminsky
--
Learn Graph Databases - Download FREE O'Reilly Book
Graph Databases is the definitive new guide to graph
on a about a 9 month old version
of linuxcnc, so somethings will be out of date...
Thanks for testing.
--
Sebastian Kuzminsky
--
Learn Graph Databases - Download FREE O'Reilly Book
Graph Databases is the definitive new
On 06/04/2014 07:43 AM, andy pugh wrote:
On 4 June 2014 14:39, Sebastian Kuzminsky s...@highlab.com wrote:
And be warned that this branch is based on a about a 9 month old version
of linuxcnc, so somethings will be out of date...
Is there any significant danger in an immediate merge
will not drive the 7i90.
There's an experimental 7i90 driver that Kim Kirwan and I wrote last
summer in the branch called hm2-7i90 on git.linuxcnc.org. It's not in
its final form yet, but if you try it and report back we'll be closer to
merging it.
--
Sebastian Kuzminsky
), shared by hm2_7i43 and hm2_7i90, so there's some
code reuse...
--
Sebastian Kuzminsky
--
Learn Graph Databases - Download FREE O'Reilly Book
Graph Databases is the definitive new guide to graph databases
.
--
Sebastian Kuzminsky
--
Time is money. Stop wasting it! Get your web API in 5 minutes.
www.restlet.com/download
http://p.sf.net/sfu/restlet
___
Emc-users mailing list
Emc-users
That said... I don't understand the error you say you're getting.
Please pastebin the version of linuxcnc you're using, the module source
code, the commands you type to load your module, the output of halcmd,
and the output of dmesg.
--
Sebastian Kuzminsky
Schechner
* Sebastian Kuzminsky
The full changelog since 2.6.0~pre2:
* HAL: make halcmd arrow syntax ('=', '=', '=') more strict
(matches manpage now)
* HAL: fix halcmd 'pin = value' and 'param = value' (matches manpage
now)
* HAL: don't clobber pin value when connecting
HOME_OFFSET to 0 mm (so that the home switch is at
0mm in G53) and i'd set Z's HOME to 50 mm (so that the machine parks 50
mm to the right of the home switch after homing).
Make sense?
--
Sebastian Kuzminsky
; cd ..
dpkg-checkbuilddeps
debuild -us -uc
sudo dpkg -i ../linuxcnc-sim_*.deb
The 'dpkg -i' will complain about all the missing runtime dependencies,
install them with 'sudo apt-get -f install', then run dpkg again as
above to install linuxcnc and it should work fine.
--
Sebastian Kuzminsky
for
printing ladder diagrams should work.
This is new territory, please let us know how how it goes!
--
Sebastian Kuzminsky
--
Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium
, perhaps while motion.in-position
is false? I'm not really sure about this part.
See here for some possibly helpful details:
http://www.linuxcnc.org/docs/2.6/html/man/man1/io.1.html
http://www.linuxcnc.org/docs/2.6/html/man/man9/motion.9.html
--
Sebastian Kuzminsky
and master) both run on Ubuntu
Lucid 10.04.
2.6 did drop support for Ubuntu Hardy 8.04.
--
Sebastian Kuzminsky
--
Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests
speed pins in motion
* docs: add descriptions of the new feed- and spindle-inhibit pins
* daisy.ngc: Moves are way too short to make tones, if in mm mode
--
Sebastian Kuzminsky
--
Accelerate Dev Cycles with Automated
, so if you have an amd64 install of Debian Wheezy you'll need
to reinstall with the i386 flavor.
Get it from here: http://linuxcnc.org/dists/precise/base/binary-i386
--
Sebastian Kuzminsky
--
Accelerate Dev Cycles
upgrading to v2.6.0~pre1-15-g2111b4e (or newer), which includes the
bugfixes.
--
Sebastian Kuzminsky
--
Start Your Social Network Today - Download eXo Platform
Build your Enterprise Intranet with eXo Platform Software
Java
/html/hal/basic_hal.html
--
Sebastian Kuzminsky
--
Learn Graph Databases - Download FREE O'Reilly Book
Graph Databases is the definitive new guide to graph databases and their
applications. Written by three acclaimed
Thornton
Jon Elson
Kim Kirwan
k.t. chan
Les Newell
Matt Shaver
Michael Geszkiewicz
Michael Haberler
Norbert Schechner
Peter Blodow
Russell Brown
Sebastian Kuzminsky
Victor Rocco
Yishin Li
--
Sebastian Kuzminsky
continuous
jogging using the halui method.
--
Sebastian Kuzminsky
--
Learn Graph Databases - Download FREE O'Reilly Book
Graph Databases is the definitive new guide to graph databases and their
applications. Written by three
on your
tolerance needs (and since your units are mm) you might try something
like G64 P0.01 or G64 P0.1.
--
Sebastian Kuzminsky
--
Put Bad Developers to Shame
Dominate Development with Jenkins Continuous Integration
On 04/09/2014 05:21 AM, bruno wrote:
I got no answer or feedback from the developers, maybe the pncconf
author is looking at this list instead ?
Please open a bug on the bug tracker: https://sf.net/p/emc/bugs
--
Sebastian Kuzminsky
with our bug tracker to add this info to our
documentation.
--
Sebastian Kuzminsky
--
Put Bad Developers to Shame
Dominate Development with Jenkins Continuous Integration
Continuously Automate Build, Test Deployment
that demonstrates how
spindle orient works. Or at least it's supposed to be...
--
Sebastian Kuzminsky
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https
developer community will continue to
work on adding support for these realtime systems, and that when it's
ready we will make another release that includes this support.
--
Sebastian Kuzminsky
us know if you get it to work!
--
Sebastian Kuzminsky
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
)
Proof-reading the docs
--
Sebastian Kuzminsky
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
it with an empty carousel pocket.
I'm not sure how the new tool information (diameter, tlo, etc) is
inserted into the tool table in that situation, though i'd assume it's
by using the standard tool table editor (accessible from the File menu
in the Axis GUI).
--
Sebastian Kuzminsky
On 03/24/2014 10:37 AM, andy pugh wrote:
I wonder if I can modify the manual toolchange code to send me an SMS
when it needs a new tool?
Seems like that'd be easy to do by remapping M6.
--
Sebastian Kuzminsky
don't need to install if you don't want to.
--
Sebastian Kuzminsky
--
Learn Graph Databases - Download FREE O'Reilly Book
Graph Databases is the definitive new guide to graph databases and their
applications. Written
. The goal is to be able to install a
working LinuxCNC on the official BeagleBone Debian image and get away
from a full custom SD card image.
I'm currently working on this as well. I'm trying to teach John Morris'
excellent xenomai kernel builder system to build armhf-bbb kernels.
--
Sebastian
On 3/17/14 16:31 , Michael Haberler wrote:
Am 17.03.2014 um 21:44 schrieb Sebastian Kuzminsky s...@highlab.com:
I'm trying to teach John Morris'
excellent xenomai kernel builder system to build armhf-bbb kernels.
assuming this works out, that package (stream) might be worth announcing
the guis, so it'll pull
in X libraries and all that. You could try splitting the deb into
finer-grained packages if you want to keep the guis and their
dependencies off the Beagle Bone Black.
--
Sebastian Kuzminsky
done. If we dont succeed at
reading the IDROM i guess we would assume it's a 7i43 without a firmware
loaded.
Seem reasonable?
--
Sebastian Kuzminsky
--
Flow-based real-time traffic analytics software. Cisco certified
On 2/12/14 09:49 , Christopher Purcell wrote:
On 10 February, 2014 Sebastian Kuzminsky wrote:
As an alternate to your system design, try to make Mathematica write the
gcode out to a file, and then use 'axis-remote newfile.ngc'. That avoids
the multi-gui problem, while still maintaining
-pre0-5175.
--
Sebastian Kuzminsky
--
Android apps run on BlackBerry 10
Introducing the new BlackBerry 10.2.1 Runtime for Android apps.
Now with support for Jelly Bean, Bluetooth, Mapview and more.
Get your Android app
follow the already-vague .ini file format, and it does not
support this feature. http://en.wikipedia.org/wiki/INI_file
I think there's no reason (other than tradition, and manpower) we
couldn't invent a new syntax and add this feature to our ini file parser.
--
Sebastian Kuzminsky
on this list can help with that kind of mail problem, but if you
take it up with the SF admins, they may be able to help?
--
Sebastian Kuzminsky
--
Managing the Performance of Cloud-Based Applications
Take advantage of what
no config changes. (Or maybe some minimal changes?
Let us know!)
--
Sebastian Kuzminsky
--
Managing the Performance of Cloud-Based Applications
Take advantage of what the Cloud has to offer - Avoid Common Pitfalls.
Read
of these pendants to test with myself).
Frederic, Dewey, are you both happy with the state of that branch? Are
we ready to merge it into master? And then I guess it's time to update
that wiki page
--
Sebastian Kuzminsky
think it was more a
proof of concept than a serious implementation of a user interface, and
i'm not surprised to hear it behaves in unexpected ways.
The MDI tab in Axis is much more widely used, and should work much
better. Could you use it instead?
--
Sebastian Kuzminsky
interface will need a substantial rewrite or die out
It'd be great to have a C API to LinuxCNC, hiding the NML
ugliness/replacement, comparable to the Python API.
--
Sebastian Kuzminsky
--
WatchGuard Dimension instantly
to axis-remote to send a new message
to axis,
* add the matching handler for that message in axis' TclCommands.remote()
* the handler would call Notifications.clear(), just like Ctrl-Space does
Then you can add a custom M-code script to call axis-remote
--clear-messages.
--
Sebastian Kuzminsky
is.
--
Sebastian Kuzminsky
--
CenturyLink Cloud: The Leader in Enterprise Cloud Services.
Learn Why More Businesses Are Choosing CenturyLink Cloud For
Critical Workloads, Development Environments Everything In Between.
Get
latencyhistogram and latencyplot) and see
if turning off the screensaver helps.
--
Sebastian Kuzminsky
--
CenturyLink Cloud: The Leader in Enterprise Cloud Services.
Learn Why More Businesses Are Choosing CenturyLink Cloud
?
--
Sebastian Kuzminsky
--
CenturyLink Cloud: The Leader in Enterprise Cloud Services.
Learn Why More Businesses Are Choosing CenturyLink Cloud For
Critical Workloads, Development Environments Everything In Between.
Get
flavor of LinuxCNC, but I think the key
part of that error message is cannot determine if this user is a member
of group xenomai. Did you add yourself to the xenomai group, log out,
and log back in?
--
Sebastian Kuzminsky
On 01/12/2014 11:37 AM, Josiah Morgan wrote:
I don't even know what Xenomai is.
linuxcnc was working great for me on the beaglebone for a week till it
just to stop opening for me and giving me this message.
On Sun, Jan 12, 2014 at 12:28 PM, Sebastian Kuzminsky s...@highlab.com
mailto:s
/rtai/commit/e0d3d0aed2baaecc7e5fea1c2c3a1f08e9898154
It's basically:
* check out the Shabby/memleak RTAI repo
* check out the linux-stable repo
* apply the kernel patch from the rtai repo to the linux tree
* build the kernel install
* build rtai modules install
--
Sebastian Kuzminsky
to be quicker easier to support than others. I've heard good
things about Debian Weezy, and about Mint.
Do you want to run a Wheezy buildslave?
--
Sebastian Kuzminsky
--
Rapidly troubleshoot problems before they affect
install package
doesn't properly configure grub. Doesn't put itself on the menu
On Sun, Dec 15, 2013 at 3:21 PM, Sebastian Kuzminsky s...@highlab.com
wrote:
Hi folks, this is an announcement and request for wider testing.
Thanks to the efforts of our developers memleak and CaptainHindsight
that RTAI kernel
is based on. We'll have to do something like Zultron's external module
builder.
--
Sebastian Kuzminsky
--
Rapidly troubleshoot problems before they affect your business. Most IT
organizations don't have
On 12/19/13 10:16 , Sebastian Kuzminsky wrote:
On 12/19/13 09:49 , Peter C. Wallace wrote:
On Thu, 19 Dec 2013, Eric Keller wrote:
Date: Thu, 19 Dec 2013 10:28:48 -0500
From: Eric Keller keller...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
is welcome!
--
Sebastian Kuzminsky
--
Rapidly troubleshoot problems before they affect your business. Most IT
organizations don't have a clear picture of how application performance
affects their revenue. With AppDynamics
, at the joint level, the two wrist joints home
independently (though maybe simultaneously).
I just got the control box hooked up to LinuxCNC (non-realtime via
RS-232, boo), kinematics comes next... :-)
--
Sebastian Kuzminsky
. I think they should be removed from all our ini
files, and I will gladly accept a patch against master to do so.
--
Sebastian Kuzminsky
--
Sponsored by Intel(R) XDK
Develop, test and display web and hybrid apps
because i wanted the same thing when i was writing all the
hostmot2 sample configs, and I couldn't find it.
I think a #include-like directive would be both useful and easy to
implement, but i'm not volunteering to do it. ;-)
--
Sebastian Kuzminsky
and the unified-build branch.
If you're willing to go with 32-bit, then RTAI (for Linux 3.4.55, on
Ubuntu 12.04) becomes an option, and both the 2.5 and the master branch
will work.
--
Sebastian Kuzminsky
--
Shape
put all this in a nice PyVCP panel with radio buttons for
selecting programmed or manual temperatures, and sliders for manual
temperature settings.
--
Sebastian Kuzminsky
--
Shape the Mobile Experience: Free Subscription
to run on 64-bit.
--
Sebastian Kuzminsky
--
Shape the Mobile Experience: Free Subscription
Software experts and developers: Be at the forefront of tech innovation.
Intel(R) Software Adrenaline delivers strategic insight
401 - 500 of 1037 matches
Mail list logo