Jesse
Are you sure you are connecting to the same data source that the AOS is using?jesse <[EMAIL PROTECTED]> wrote:
Jim,Yes... it's the same company. Regards,Eng Han--- In Axapta-Knowledge-Village@yahoogroups.com, Jim Dickie <[EMAIL PROTECTED]> wrote:> Are you logging in to the same company?>
Hi Stefan
You will first need to have the license for the language. The labels will then be created automatically by Axapta. You will then have to choose the appropriate language from the language combo of the General tab on the clients configuration.
Varden Morris
J. Wray & Nephew
this problem.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2226Fax: (876) - 923 - 5372
Cell: (876) - 3833566Email: [EMAIL PROTECTED] [EMAIL PROTECTED]
Craig Fidler <[EMA
on the RPM host and verify the level of access permissions.
Change the account that the RPM service is running under to a user account. This should be a domain user, however, in the case of Windows 2000/NT, a local user may also be sufficient.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234
Hi Luis
Is there a reason for you not wanting to change the text for this label? If you change the text for the label the new text will appear everywhere the label is used.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone:
You are most welcome Raul.Raul Llorente Peña/OPENSOLUTIONS <[EMAIL PROTECTED]> wrote:
Thanks for confirming it, guy ;-) Thanks very much for your attention, Varden!! Raúl Llorente Peña Análisis, Desarrollo e Implementación en Microsoft Bussiness Solutions-AxaptaOPEN SOLUTIONS
Varden
, BLOCKED, LOGINAME FROM master..sysprocesses WHERE blocked <> 0
You may then kill the process that is causing the block in Query Analyzer as follows:
Kill 98
where 98 is the blocking spid.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Ja
ollo e Implementación en Microsoft Bussiness Solutions-AxaptaOPEN SOLUTIONS
Varden Morris <[EMAIL PROTECTED]>
14/04/2005 13:50
Por favor, responda aAxapta-Knowledge-Village@yahoogroups.com
Para
Axapta-Knowledge-Village@yahoogroups.com
cc
Asunto
RE: [Axapta-Knowledge-Village] How t
a to be printed to the report oryou may use a >programmable section to print the databy calling >element.execute(). >Varden Morris __ Do you Yahoo!? Yahoo! Mail - Helps protect you from nasty viruses. http://promotions.yahoo.com/new_mailSharing
GetTickCount() returns an integer that is the number of thousands of seconds that the system has been running and not the time which I think Raul is interested in.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 -
of the programmable section.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2226Fax: (876) - 923 - 5372
Cell: (876) - 3833566Email: [EMAIL PROTECTED]
[EMAIL PROTECTED]
setiaji kurni
I have noticed this too Raul and it is still a puzzle up to this point for me. Raul Llorente Peña/OPENSOLUTIONS <[EMAIL PROTECTED]> wrote:
In 2.5, sentences blocks try/catch aren't managed by Axapta when session is a COM one.
Let's see this example code (doesn't matter wherever you put it to
connecting simultaneously (remember that 3-tier is scalable unlike 2-tier)? Do you thing of the fact that here is a possibility that your problem may not be solved going 2-tier?
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) -
think that and what harry had to say about creating a Temp Table and load from there..
Thanks Friend
From: Varden Morris [mailto:[EMAIL PROTECTED] Sent: Wednesday, 6 April 2005 2:41 AMTo: Axapta-Knowledge-Village@yahoogroups.comSubject: RE: [Axapta-Knowledge-Village]
Rocco
You can look
Rocco
You can look at the CacheLookup property on the table. It is not recommended to cache tables that are frequently updated but since the inventory table should be fairly static you may consider do this by setting the property appropriately.
Varden Morris
J. Wray & Nephew
.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2226Fax: (876) - 923 - 5372
Cell: (876) - 3833566Email: [EMAIL PROTECTED] [EMAIL PROTECTED] "Gahr, Andreas" <[EMAIL
Hi Charmaine
If the report uses a query you just need to add the date as a range on the query.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2226Fax: (876) - 923 - 5372
Cell:
Hi Axnbie
You will have to run your report via a class. I did an example for you in a project that I attached.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2226Fax: (876) - 923 - 5372
on the programmable section.
Fetch
..
while (myResult.next())
{Var1 = myResult.getString(1);Var2 = myResult.getString(2);
Elment.execute(1); //execute the programmable section with //ControlNumer property = 1
}
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spa
Hi Ali
Look as the MSCOMM activeX control. If you look at it from Axapta the name is Microsoft Communication control. To read data on demand you can output the end of line character on the port then the onEvent_OnComm() event will be fired. You can then read the data from there.
Varden
point to the AOS. It is better to use one XPO configuration file for all the clients since is saves on maintenance.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2226Fax: (876) - 923 - 5372
Cell:
Hi Chea,
Just execute this command again:
select _tblSales;
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2226Fax: (876) - 923 - 5372
Cell: (876) - 3833566Email: [EMAIL PROTE
Hi
In addition to using forUpdate you must eclose the update in a transaction. For example:
ttsbegin;
while select forUpdate CustTable where CustTable.CustGroupID == '10'
{
CustTable.Balance = 1000;
CustTable.Update();
}
ttscommit;
Subrahmanyam Mamidi <[EMAIL PROTECTED]> wrote
Combo(1, 2):
info(strfmt('%1',UniqueEnumCombo(1, 2)));
break;
}
}
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2226Fax: (876) - 923 - 5372
Cell: (876)
Please remember to filter by DATAAREAID when using the Statemant class.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2226Fax: (876) - 923 - 5372
Cell: (876) - 3833566Email: [EMAIL PROTE
first thing he may ask you for is the batch number so that he may look back at the production of that batch to see if he can detect the problem. He may also withdraw the entire batch from the market.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica,
Try declaring table buffers with different names as follows:
CustTable CustTable1;
CustTable CustTable2;
Use CustTable1 and CustTable2 in the query.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141
Hi Padmaja
The correct syntax is as follows:
select LedgerTrans where LedgerTrans.Accountnum >= '1000' && LedgerTrans.AccountNUm <= '2000' && LedgerTrans.TransDate == 1\1\2004 && LedgerTrans.Voucher like 'F111*';
Varden
per table and a table that has a clustered index can have several non-clustered indexes.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2226Fax: (876) - 923 - 5372
Cell: (876) - 3833566Email: [E
SalesID EDT will have to be modified. It is best not to do this while other users are working in the system.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2226Fax: (876) - 923 - 5372
Cell:
I need to make a correction. Macro errors show up at compile time. If you create any macro (macros in macro libraries, stand-alone macros and (local) macros inside methods) and do not use it there is no possibility of getting an error. Macro is a string that may be used as a substitution in cod
ts.
From: Varden Morris [mailto:[EMAIL PROTECTED] Sent: Friday, 11 March 2005 9:14 a.m.To: Axapta-Knowledge-Village@yahoogroups.comSubject: Re: [Axapta-Knowledge-Village] What does 'ReIndex" function exactly do
Hi Padmaja
You are correct, index is use to search a table in a more effic
a personal experience with a table where my Axapta client hangs up each time I tried to update a record in the table. After re-indexing the table the problem went away.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 -
As far as I know Axapta does not allow you to use function calls in the WHERE clause of a select statement. You can get around that by using the select statement syntax of your back end database as follows. I am using Microsoft SQL.
static void SumByYearANDMonth(Args _args){ Connection con
the data from these tables so that you can use standard Axapta to import the data.
You then need to write code to create journal entries from these tables and then use standard Axapta to post the journals.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingsto
SalesTable.SalesID == 'GX1900' { TableForInsert.Field1 = SalesTable.ApprovedBy; recInserts.add(TableForInsert); TableForInsert.clear(); } recInserts.insertDatabase();
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica
rprise.
Before I get the boss to spend more cash on this SQL Upgrade, do you know of any way to get SQL to use 3GB of RAM on the Standard Edition.
ps. Also any Tips on Table Indexing.
Rocco
From: Varden Morris [mailto:[EMAIL PROTECTED] Sent: Monday, 7 March 2005 7:15 PMTo: Axapta-K
Hi Danny,
Macro errors only occur at runtime.Danny Gaethofs <[EMAIL PROTECTED]> wrote:
Sorry all for your time, I found the reason for it.It was in the definition of the macro itselve.I created a macro that contained the next line#define.Test-LookupNow it seems that the "-" does not work. Only
ve any problem ( network ..etc ) , the cluster will automatically move the SQL server to the second database server ( of course we should assign that second database into cluster administration ).
- Original Message -
From: Varden Morris
To: Axapta-Knowledge-Village@yahoogroups.com
iguration.
for memory , we already enabled AWE memory .
thx
sas
- Original Message -
From: Varden Morris
To: Axapta-Knowledge-Village@yahoogroups.com
Sent: Saturday, March 05, 2005 1:24 AM
Subject: Re: [Axapta-Knowledge-Village] how to minimize blocking on axapta ?
Hi Sas
The
Hi Padmaja
You are very close there. The classes are PurchFormLetter_PackingSlip and PurchFormLetter_Invoice. There inherit the PurchFormLetter class. The reports are PurchInvoice and PurchPackingSlip.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingsto
uspect it's bacuse our coding .
my experience tuning hardware , OS and SQL server only give 10% improvement, table indexing also improve the performance . and now we are investigating our coding.
thx
sas
- Original Message -----
From: Varden Morris
To: Axapta-Knowledge-Village@yahoogroup
Hi Sas
Could you please explain what you mean by "move from DB server1 into db Server 2."
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2226Fax: (876) - 923 - 5372
C
not needed.. Would you agree?
Rocco
From: Varden Morris [mailto:[EMAIL PROTECTED] Sent: Wednesday, 2 March 2005 7:59 PMTo: Axapta-Knowledge-Village@yahoogroups.comSubject: Re: [Axapta-Knowledge-Village] how to minimize blocking on axapta ?
The two main things I know can affect blocking are hardwa
Why is it that you must use a job?Giray Simsek <[EMAIL PROTECTED]> wrote:
Varden,Thank you for your suggestion. However, I have to usea job so I can't use your solution.Giray.--- Varden Morris <[EMAIL PROTECTED]> wrote:> Giray> > Create a class with a static method
sName", "MethodName", Parameter1)
The parameter is optional and you can have up to six of them. You will have to use a parameter list for more.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2
help to you.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2226Fax: (876) - 923 - 5372
Cell: (876) - 3833566Email: [EMAIL PROTECTED]
[EMAIL PROTECTED]SAS <[EMAIL PROTECTED]> w
I think you have to purchase additional ones from your VAR.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2226Fax: (876) - 923 - 5372
Cell: (876) - 3833566Email: [EMAIL PROTE
Sorry. Here is the attachment.
Ashi Singh <[EMAIL PROTECTED]> wrote:
A lot of thanks for showing a interest in my problem what i thought is a better idea is to just send you all the xpo's which are there in my project.
Again thanks a lot i am working on whatever links that you have pr
You are most welcome.Steeve Gilbert <[EMAIL PROTECTED]> wrote:
Thank Varden for the answer.
Ashi, what seems to be the problem here? It is working has expected. I've tried that :
static void Job1(Args _args){
TmpSum tmpSum, p1, p2;
;
tmpSum.Key = "1";
tmpSum.insert
Hi
After populating tmpSum you do the following:
p1.setTmpData(tmpSum);
p2.setTmpData(tmpSum);
That should do he trick.
Varden
Steeve Gilbert <[EMAIL PROTECTED]> wrote:
(See job below)
I though I would see in the infolog "1,2,3,1,2,3" but that is not he case, I see "1,2,3". It seems
Projinvoicetable.InvoiceAccount == custtable.AccountNum;
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2226Fax: (876) - 923 - 5372
Cell: (876) - 3833566Email: [EMAIL PROTECTED]
[E
Hi Anton
If you did not use my previous example you may use this:
select * from CustTable where CustTable.createddate == (select maxof(createddate) from Custtable).createddate;Varden Morris <[EMAIL PROTECTED]> wrote:
Hi Anton,
The way you may get around this prob
.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2226Fax: (876) - 923 - 5372
Cell: (876) - 3833566Email: [EMAIL PROTECTED]
[EMAIL PROTECTED] tj_jayson <[EMAIL PROTECTED]>
Hi Rocco,
As far as I know you will have to register both of them on separate computers if you want to use both at the same time. Only one COM connector can be registered and use on a compter at a time.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingsto
from custTable where LTRIM(Accountnum) = '%1' AND " + "Name like '%a%'", "11");SQLcustTrans = sqlStmt.executeQuery(sqlSTR);
while (SQLcustTrans.next()){ print SQLcustTrans.getString(1); pause;}
Varden Morris
J. Wray & Nephew Ltd. - Grou
I think this way is a smart way of doing it. In order for it to work you will have to override the canClose method instead of the close method. As steeve said, you only need the code for SC_MINIMIZE.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jam
Hi Morris,
The first thing I would do is check the application log in event viewer for the error. Based on that we will have a better idea of how to help you.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 -
This is possible using the Axapta Business Connector. You can use VBA in excel to upload the data via the Business Connector. When you use the Business Connector all the business logics in Axapta are available for posting and validation.
Varden Morris
J. Wray & Nephew Ltd. - Group
You are most welcome.kam tt <[EMAIL PROTECTED]> wrote:
Thank you Varden and Max,"_ds" is cool. You guys certainly make my day.Regards,kamtt--- Varden Morris <[EMAIL PROTECTED]>wrote:> It is normal for users to see what was in the table> before they open a form. Th
in the form. This makes a control the third and I think the last best place to write code.
It is best practice to place no code if possible on a form. This makes the form simple and easy to maintain and reduces the cost of upgrades.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spa
It is normal for users to see what was in the table before they open a form. The reread and refresh on the datasource allows users to see new updates/inserts.Max Belugin <[EMAIL PROTECTED]> wrote:
Hello Varden Morris,÷åòâåðã, 13 ÿíâàðÿ 2005 ã., you wrote:VM> After you have done an
Hi Kamtt
After you have done an update to PurchTable execute the following code:
PurchTable _ds.reread();PurchTable _ds.refresh();
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2400, 2412Fax:
doinf this.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2400, 2412Fax: (876) - 923 - 5372
Cell: (876) - 3833566Email: [EMAIL PROTECTED]
[EMAIL PROTECTED]
D
Hi Jesmond
The class name is SalesFormLetter.Jesmond Giordimaina <[EMAIL PROTECTED]> wrote:
Hi,
can anyone highlight which class shall I use for printing an invoice or picking list?
reg
Jesmond
Do you Yahoo!?The all-new My Yahoo! Get yours free! Sharing the knowledge on Axapta.
Do you
Try synchronizing the inventTable.Stefan Heidkamp <[EMAIL PROTECTED]> wrote:
Hi all,when we want to open the form InventTable or the menu item InventTable (under display) we get the following error:Cannot select a record in table Item table (InventTable).The SQL database has issued an error.SQ
Hi Anton,
I tried this in a job andI didn't get any error:
Query q = new Query(); QueryBuildDataSource dsSalesTable; QueryBuildDataSource dsSalesLine; QueryRun qr; SalesTable SalesTable;
dsSalesTable = q.addDataSource(tablenum(SalesTable)); dsSal
seeif the modified tables (new fields added) have thedata , If you do have the data then you need to exportthese data and then when importing this data you needto select to update the existing data.good luck.--- Varden Morris <[EMAIL PROTECTED]> wrote: > Login to the CUS layer and expo
.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2400, 2412Fax: (876) - 923 - 5372
Cell: (876) - 3833566Email: [EMAIL PROTECTED]
[EMAIL PROTECTED] Alessandro Ghidini <[EMAIL PROTECTED]
Login to the CUS layer and export the required objects from this layer. Best to do this in a project. After doing this you then delete the objects from the CUS layer. Logout of Axapta and login to the VAR layer. Import the project you have exported from the CUS layer.
Varden Morris
J
Hi Jason,
Could you please fwd that file to me. I dont have access to partner source :( .
Thanks and Regards
Varden Morris
jasondinham <[EMAIL PROTECTED]> wrote:
Everyone who uses inventory in Axapta should review the Inventory Closing Whitepaper posted on Partner Source. Let m
You can try this:
range1 = dsInventTable.addRange(fieldid2ext(fieldnum(InventTable,Dimension),1))
OR
range2 = dsInventTable.addRange(fieldid2ext(fieldnum(InventTable,Dimension),2))
OR
range3 = dsInventTable.addRange(fieldid2ext(fieldnum(InventTable,Dimension),3))
Varden Morris
J. Wray
I think you need to do something like this:
tmpTab = this.Process_InventSum(BranchId,ItemGroup);
You are just calling the method (this.Process_InventSum(BranchId,ItemGroup) but you are not capturing the return value.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town
Hi Arijit
If you have two AOS (say AOS1 and AOS2) running in a cluster and you logon to Axapta and hit AOS1 all the users who are on AOS1 will show up as "Thin Client" while all the users on AOS2 will show up as "Not AOS". The converse it also true.Arijit Basu <[EMAIL PROTECTED]> wrote:
Dear
Most of the following information is from the Developers Guide.
A macro is a code or text substitution that cannot run independently, but
can be used anywhere you can write code in the system, for example in
jobs, classes and forms.
MorphX has a built-in macro-preprocessor. The purpose of m
x27;t need to create this file before.'Check the content of this file after code executionBuffer.WriteFile "C:\MyWriteFile2.Txt"
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2400, 2412Fax: (
In the Microsoft Axapta Developer's Guide from the help menu do a search for Axapta Business Connector. After you read the first four pages there are several VB 6.0 examples that follow.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jam
Sorry.
A correction is needed for the third sentence below. It should say "Set the class property to class and the object property to the name of the class."Varden Morris <[EMAIL PROTECTED]> wrote:
It is Axaptas standard/best practice to create a class to load your report.
MenuItemType to output and the MenuItemName to the name of the MenuItem created. Set any other required properties of the MenuItemButton.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2400, 2412Fax: (876) -
7;, 'Text2');
or
MyObject myObject = new MyObject('Text1', 'Text2', 'Text3');
and so on.
Or you could declare the first parameter or first few parameters without initial values and the others with initial values. This means that you have to pass values f
;t print it. The curly brackets are not necessary in the case since only one statement follows but I use it for illustration.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2400, 2412Fax: (876) -
(); }
This means that if whatever function value you are checking for is not equal to zero print the section otherwise don't print it. The curly brackets are not necessary in the case since only one statement follows but I use it for illustration.
Varden Morris
J. Wray & Nephew Ltd. - Group
firewall it is open to the world. But the more tiers you add to your configuration the more performance will degrade as a result of the network hops. You could optimize the links between the firewalls and the web sever by using high speed network card/connections.
Varden Morris
J. Wray & Ne
You are most welcome.James Flavell <[EMAIL PROTECTED]> wrote:
Thank you very much Varden
-Original Message-From: Varden Morris [mailto:[EMAIL PROTECTED]Sent: 03 December 2004 20:37To: [EMAIL PROTECTED]Subject: Re: [Axapta-Knowledge-Village] AOS required for Enterprise Portal?
additional users as the number of users grow but with 2-Tier the performance will fall drastically when the number of users exceed a certain limit which depends on things like sever specs and type of communication links.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town
added to the table to this node and save the table. Go back to the inventTable form and look at the fields listed under the identification group and you will see you new field added automatically.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica,
You are most welcome.axaptagrp <[EMAIL PROTECTED]> wrote:
thanks Vardenthats exactly what I had to do!Best Regards,John Chircop.--- In [EMAIL PROTECTED], Varden Morris <[EMAIL PROTECTED]> wrote:> You can use Microsoft SQL statements directly in X++. Insert the following code in
tor in the Microsoft Axapta Developer's Guide for details.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2400, 2412Fax: (876) - 923 - 5372
Cell: (876) - 3833566Email: [EMAIL PROTECTED]
You can use Microsoft SQL statements directly in X++. Insert the following code in a job and test it:
Connection con = new Connection(); Statement sqlStmt = Con.createStatement(); ResultSet SQLcustTrans; Notes sqlStr ;
sqlStr =strFmt("select * from custTable wh
If the form 'KompForm' exists in the AOT do the following:
FormRun Komp;
Komp= new FormRun(new args('KompForm'));
Komp.init(); Komp.run(); Komp.wait();affekatz <[EMAIL PROTECTED]> wrote:
Can any one tell me how to load a form from a object this dosn't seem to work:
as follows:
My_komp1.text('It works');
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2400, 2412Fax: (876) - 923 - 5372
Cell: (876) - 3833566Email: [EMAIL PROTECTED]
[EMAIL PROTEC
the fileds in there correct positions. From there you may use Axapta to import the data from the template sheet.
Hope that will help.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2400, 2412Fax: (876) -
by using 3-tier it may still work out cheaper to go with the processor license.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2400, 2412Fax: (876) - 923 - 5372
Cell: (876) - 3833566Email: [E
sure about the number SQL uses in the pooling but I did a rough check and found 61 connections to SQL when 81 users login to Axapta. This means a 25% reduction in the number of required connections.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica,
you would executed the programmableSection outside the loop where you send the detail lines to the report.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2400, 2412Fax: (876) - 923 - 5372
Cell:
roduct configurator that's included in Axapta Varden Morris <[EMAIL PROTECTED]> wrote:
I do not know exactly what is product builder. Is it a third party software?
if you do the following:
[class]public class AB{int x;int y;}[New]void new(int c = 0, int d = 0){x = c;y = d;}
The above is
ct builder. I notice that your call from product builder does not hold a handle to the object for future use if you intend to return value(s) from the object with an accessor method. Provided that you get this to work I will help you with the rest.
Varden Morris
J. Wray & Nephew Ltd. -
to an instance of the object as follows:
A = new xx();
Or you could have done it all in one statement as follows:
xx A = new xx();
You may now use the handle to access the object by calling the object's methods.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish
Hi Bob
You can do this by overriding the executeSection method of the report section that prints the lines on the report. Enclose the super() call in an if statement that will not allow it to be executed when the required conditions are not met.
Varden Morris
J. Wray & Nephew Ltd. - G
the System Documenation node of the AOT then tables. The system tables are listed under this node and you will find the UserInfo table there.
Varden Morris
J. Wray & Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2400, 241
201 - 300 of 311 matches
Mail list logo