I have prepared my exam with the Sybex book and it is OK (I passed), but
it is not the best in the series.
I also have Remote Access (passed with 853) and Routing (haven't read it
yet) by Syngress. Remote Access is a very good book, but it has a lot
of typos and mistakes (the classic one is
Hi all
I am also looking for same. There was one free copy
ditributed by Microsoft on technet CDs. If some one
knows in which month they have distributed the same.
Regards.
__
Get personalized email addresses from Yahoo! Mail - only $35
a
Your right, not all that special- 72 pin/ parity/ 70ns or better/ 16 Megs
Phil
- Original Message -
From: "Cisco" [EMAIL PROTECTED]
To: "Cisco groupstudy.com" [EMAIL PROTECTED]
Sent: Tuesday, January 30, 2001 2:02 AM
Subject: 2500 DRAM
Anyone know if there is anything special about
Does anyone how where I can find out what the SAP used is - I need to modify
my SAP filters to allow this one through. We are trying to block all
unnecessary traffic
Regards
Andrew Larkins
BCom, CCNA, CCDA
Bytes Technology Group
Tel: +2711 800-9300
Fax: +2711 800-9496
Cell: +2783-656-7214
Scott,
This is a typo as far as I can tell.
Rich
On Jan 30, 4:34am, Scott Froese wrote:
Subject: RIP Config Question - Doyle's Book
Hi all-
I'm having a lot of trouble figuring out a configuration exercise and am
hoping someone here can help. Can someone please explain to me why the RIP
Does anyone have any reference material i.e pdf manuals for the exams.
I've just passed my CCNA exam last week with a score of 967.
Can anyone give any advice on the structure to the CCNP and if there is
exams that should be completed before others etc.
Again any pdf or websites that may be
I Took this exam 5 days after returning from the course in Brussels. It's
tough and matches the course well. I wouldn't call it 'Advanced Pix', but it
does test how solid your knowledge of the fundamentals is.
You need to know all the regular PIX commands and concepts from 4.x and 5.x
along
Dear all,
I have a funny question that would like to see if it is possible, and most
importantly, how to do it..
I have four 25xx routers... but I don't have a terminal server I want to
access the console of all routers remotely, so I am thinking if I can
connect the console port of a
Hi,
Is it a must the primary and secondary RSP should have the same RAM
capacity? Is it ok if I install more RAM on primary RSP temporarily?
Thanks
Regards,
Raymond
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
But 100% needed but it is recommended. If you want the slave to come up after a
primary fails and then run the same setup it seems sensible to have the same
amount in both.
Rich
On Jan 30, 12:46pm, mak wrote:
Subject: 7507 RSP RAM
Hi,
Is it a must the primary and secondary RSP should have
I have four 25xx routers... but I don't have a terminal server =
snip
Using your example, you will need to connect the AUX port on R1 to the =
CON port on R2, etc, etc. =20
Standard Cisco Roll-Over cable is needed.
Config on the R1 should work with:
line aux 0
access-class 1 in
no
Mmmm , BUS contention in a token ring environment ?
I pass on this one ;-)
flem
--- "Thangavel .V.M" [EMAIL PROTECTED] wrote:
I have a question extending to this discussion,
whether this early token
release will create a bus contention ?
Thanks / Thangavel
- Original Message -
This should be asked on the associate mailing list.
andy
On Tue, 30 Jan 2001, Vishweshwaran wrote:
WHERE CAN I GET THE SAMPLE QUESTION PAPERS FOR CCNA?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
HEI
I hope someone could help me with a big problem Ive got.
My client needs to use securemot ipsec program through a pix firewall to a
firewall1 at the remote sight.
theres no problem to get key exchange process, and I am beeing prompted for
password and username.
after this the program says
Hello Everybody.
I am watching this news group from last 3/4 weeks.
Most of the people here are talking about CCNA PDF Files.
It seems that CCNA Guys are trying to help each other and they are sharing
their PDF files (E-Books).
Now I want to ask from everybody that if anybody have CCNP PDF
Thats right
Can you send PDF books to me also !!
Cheers
Bob
-Original Message-
From: Tariq [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 30, 2001 1:00 PM
To: [EMAIL PROTECTED]
Subject: CCNP Books
Hello Everybody.
I am watching this news group from last 3/4 weeks.
Most of the
CiscoPress one is the best, followed by Syngress n the no choice but Sybex
Wibowo Nur Susetio [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Dear All,
Any body have experience with sybex/syngress for CCNP Support (640-506)?
Which one is good?
Tks
What's wrong with a book?
Brian
From: "Tariq" [EMAIL PROTECTED]
Reply-To: "Tariq" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: CCNP Books
Date: Tue, 30 Jan 2001 07:59:33 -0500
Hello Everybody.
I am watching this news group from last 3/4 weeks.
Most of the people here are talking about
Nothing wrong with a book.
But PDF Files are portable. You can save PDF files in your laptop and you
can read your books in your office / home / traveling and even in coffee
shops.
Thanks
-Original Message-
From: Brian Lodwick [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 30, 2001
I propose the word [pdf/PDF] are banned from this list.
andy
On Tue, 30 Jan 2001, Robert Nickson wrote:
Thats right
Can you send PDF books to me also !!
Cheers
Bob
-Original Message-
From: Tariq [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 30, 2001 1:00 PM
To:
And why should they be banned.I thought the whole purpose of this list is to
help people pass there Cisco exams not preach about copyright laws etc.If
you personally don't wish to read mails about PDF requests then ignore
them,don't let it bother you mate.Lifes to short,get abit more of a life.
Because your contribution of 'send me free stuff too' is not something
that enriches the group nor helps one reach their goal of completing their
cisco certifications. There are plenty of repositories of Cisco
information across the net for you to peruse. Once the list degenerates
into 'send me
Hi,
I'm having a hard time at the moment sourcing a used Catalyst 5000 chasis in
my little country called Australia. Are they all hiding from me, or am I
just not looking in the right places? =)
I see them all the time on Ebay, but the heavy thing costs a fortune to ship
back to my little
I found certification zone's practice test to be extremely helpful.
At 08:43 PM 1/29/01 -0800, you wrote:
Where can I get some good study question for the R/S written exam?
Derrick Shumake, CCNP+/Voice+ATM
Network Consultant,
9110 E. Nichols Ave, Suite 105
Englewood, CO 80111
* 720.873.0254
Does anyone know if Cisco Secure supports integration into NDS???
Thanks
Andrew
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
You could try asking the list~ What is the SAP number of this service type
___ ?
Here are some maybe the one you are looking for is in this list?
DESCRIPTION SERVICE TYPE
---
User Group 2
Print Queue 3
File Server 4
I've just posted an Internet Draft that pertains to some of the
exterior routing performance discussions on the list.
Howard
---
A New Internet-Draft is available from the on-line Internet-Drafts directories.
Title : Benchmarking Methodology for Exterior Routing
Hi,
I have MCNS and I think that is enough with the Cisco's oficial
traininig. If you want to deepen you can find a lot of information from
many webs.
Ricardo Ciganda
CCNA, CCDA, Security
Systems Engineer and Network Consultant
BYTEMASTER, S.A.
C/ Gran Capitan 2-4 4ยช Planta
Barcelona,
Is anyone going to cancell his/her lab test schedule around March in RTP ?
please let me know.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi!
We are using a bridging device which is managable via a V.24 Interface .
up-to-now we are using terminalservers
to access this device -
BUT
is it possible to manage this device with a router - using a channelized
interface - each 64k timeslot is used
for one device -
my problem in here is:
And why should they be banned.I thought the whole purpose of this list is to
help people pass there Cisco exams not preach about copyright laws etc.If
you personally don't wish to read mails about PDF requests then ignore
them,don't let it bother you mate.Lifes to short,get abit more of a life.
Teri,
Maybe you should buy the book , so you can get PDF files with it ( I think
all CISCO certification guides got the book in pdf format ). :)
"Tariq" [EMAIL PROTECTED] wrote in message
01c08abc$7fc18e90$[EMAIL PROTECTED]">news:01c08abc$7fc18e90$[EMAIL PROTECTED]...
Hello
On Tue, 30 Jan 2001, Adam Hickey wrote:
Actually, I have to correct only one point made in the response below. There
are a lot of people who are too lazy to search things out on the internet
here. That is why we keep getting numerous questions that are answered
either on cisco.com or the
Actually, I have to correct only one point made in the response below. There
are a lot of people who are too lazy to search things out on the internet
here. That is why we keep getting numerous questions that are answered
either on cisco.com or the archives of the site. So this "send me free
After searching the CCO without any luck I have been unable to find the
command for PIX (ver 4.4) that changes the amount of lines displayed without
prompting for you to pause. This comes in handy when grabbing a copy of the
config.
Thanks,
Joey Fowler
...Build a man a fire and you keep
The Radius server for NT is on the free option pack CD for nt4.0 the Radius
server is called Internet Authentication Service (IAS) or some such name.
It can only be loaded on NT 4 Server not workstation.
I have been using it for remote dial up along with a Shiva Netmodem, for
about 3 years and
pager lines x
""Fowler, Joey"" [EMAIL PROTECTED] wrote in message
E37739B46CE9D311A76700508B6CAF293CAB12@CORN">news:E37739B46CE9D311A76700508B6CAF293CAB12@CORN...
After searching the CCO without any luck I have been unable to find
the
command for PIX (ver 4.4) that changes the amount of
I think it comes down to a very simple rule:
The purpose of this list is to help each other with Cisco studies the LEGAL
way - not the ILLEGAL way.
If you really want to cheat and you can't find the cracked codes or illegal
copies of whatever you're looking for on the Internet - you're probably
Hey guys, Juniper announced a new certification that is geared for
professionals that work at ISPs.
http://biz.yahoo.com/bw/010130/ca_juniper.html
http://www.juniper.net/training/certification/
Please let me know what you think? Do you think this certification will be
worth getting and well
Hi.
I have a question regarding this. Are these links posted anywhere, perhaps
on the groupstudy.com site in the form of FAQ's or something? I am always
interested in links to study materials as well. Obviously, I don't want to
use anything copyrighted or illegal. I am fairly new here, so I
For now on try to send these requests and topics to the CCNA study list where they
belong. Thanks...
Mark Z.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
On Tue, 30 Jan 2001, Buri, Heather H wrote:
Hi.
I have a question regarding this. Are these links posted anywhere, perhaps
on the groupstudy.com site in the form of FAQ's or something? I am always
interested in links to study materials as well. Obviously, I don't want to
use anything
pager lines # of lines
- Original Message -
From: "Fowler, Joey" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, January 30, 2001 9:24 AM
Subject: Terminal length command for PIX
After searching the CCO without any luck I have been unable to find
the
command for PIX (ver
Interestingly, a certain "artistic style" web site that was mentioned in the
past week as a source of *free* downloads of copyrighted material is no
longer up. I wonder who squealed?
More things that make you go "Hm..."
_
FAQ, list archives, and
Folks,
I have a question related to setting up routing between bridge groups as
well as to routed interfaces. Please take a look at the following setup and
let me know if I'm doing anything incorrectly. Thanks for your help.
current setup:
VLAN1: FE ports 1-20, network 10.3.1.0/24, BVI1
Anybody got one for sale cheap (and I do mean cheap...)?
Thanks in advance!
Z
_
Get your FREE download of MSN Explorer at http://explorer.msn.com
_
FAQ, list archives, and subscription info:
Hi,
I'm trying to disable ping (ibound) on the outside (internet address) side
of my PIX 520 version 4.4.7 . How can this be done whilst still retaining
the outbound only icmp access I have for internal machines ?
cheers
Chris
No IS-IS, but you must know OSPF configs, EIGRP and BGPv4 like its cool
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
AndyD
Sent: Monday, January 29, 2001 10:49 PM
To: [EMAIL PROTECTED]
Subject: BSCN??
Has anybody out there taken the BSCN test?? How
Hi All
I'm trying to send the ISDN numbering types and translate numbers from the
ingress to the egress gateway. I have a gateway which accepts an incoming
call from the PSTN then routes it across the IP network to the egress
gateway and to an IVR system, this part works fine. However when I get
Hey all,
I know this subject has been touched on previously and there were some
postings in the archive. However, the threads I looked at were not very
definitive. So, can someone relate tips, experiences, or, if possible,
config scripts on how to use my 1605 to route into a hub for
If you want illegal software and cracks for pirated software ~~ go to crack
sites.
If you want book reviews ~~ go to Amazon.com (their reveiws are awesome)
If you want to learn about real world scenarios, can't figure something out,
want to expand upon certification topics, need help
I was wondering if anyone knows how to set the terminal length on a Cat6509
switch? I could not find anything on CCO.
--
Edward J. Gomez, MCSE, CNE, CCNA
Information Systems Manager
ProxyMed, Inc
2555 Davie Road,
Suite 110
Fort Lauderdale, Florida 33317
(954) 473-1001 x315
Hi,
Took and passed 640-647 yesterday. I used the CVOICE course to prepare. I
also have the "Integrating Voice and Data Networks" book which provided an
excellent foundation on the subject.
-dennis
""umerkhan"" [EMAIL PROTECTED] wrote in message
For this exam, would you recommend that the explanation of BGP provided in
the BSCN books is sufficient or would you recommend Basaam Halabi's book,
Internet Routing Architectures, to pass the exam? Also, what book(s) do
people recommend for this exam?
I currently have the BSCN book by Thomas
Edward,
Here is the link (watch the word wrap). Set length x
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2900/cgcr29k/comref.h
tm#xtocid366342
Joey
-Original Message-
From: Edward Gomez [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 30, 2001 11:31 AM
To: '[EMAIL
I am looking to buy about 10 2513's. Does anyone have any they would like
to get rid of? E-mail me offline to discuss.
Thanks.
Kelly D Griffin, CCNA, CCDA
Network Engineer
Kg2 Network Design
http://www.kg2.com
http://1cis.com
Free E-mail Servers
What's a terminal server and where can I find more info on the subject?
Adam Burgess wrote:
I have four 25xx routers... but I don't have a terminal server =
snip
Using your example, you will need to connect the AUX port on R1 to the =
CON port on R2, etc, etc. =20
Standard Cisco
Hi;
Hi;
I got the following message from my CISCO 2509, my questions is how to
upgrade the boot rom.
System Bootstrap, Version 4.14(9.1), SOFTWARE
Copyright (c) 1986-1994 by cisco Systems
2500 processor with 14336 Kbytes of main memory
Unknown or ambiguous service arg - udp-small-servers
Brian,
I have to admit, I actually find the real world scenarios the most
interesting. When I first joined, I thought this was a list strictly
devoted to the various exams and studying but I was (pleasantly) surprised
to find that there are many actual cases posted here as well.
Thanks,
buy a new ROM chip.
Brian
From: "Vincent" [EMAIL PROTECTED]
Reply-To: "Vincent" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Boot Message
Date: Wed, 31 Jan 2001 01:23:12 +0800
Hi;
Hi;
I got the following message from my CISCO 2509, my questions is how to
upgrade the boot rom.
System
I am trying to setup two routers with DLSW+ , when I do with routing ,I can'=
t=20
ping each other loopback interfaces for some reason.=20
Hostname DCE_Router
dlsw local-peer peer-id 10.1.1.1
dlsw remote-peer 0 tcp 10.1.1.2
dlsw bridge-group 1
Loopback0
=A0 ip address 10.1.1.1 255.255.255.0
I would say that you are better off buying Sam Halabis book for a formidable
comparison. I cannot really comment on Thomas's book due to the fact that I
never read it. I can say however that the amount of BGPv4 info studied
should come from varied sources.
-Original Message-
From:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_v42/pix42cfg/p
ix42cmd.htm#26486
Check out the above link. This should help you. Basiclly you want to
permit echo's going out, and allow echo replys coming in. The rest is in
the doc.
-- Kevin
- Original Message -
From:
I just took the BSCN today and all I used was the Cisco Press book. I read
the book and then read it again while creating my own study guide. So far,
the Cisco press books have not let me down one bit. If you know them, you
will have zero problems on the test.
As far as the test itself, in my
Terminal server, it doesn't sound like such a good thing, huh.
It is a router with async lines. You take the lines and plug them into all
of your other routers in the rack throw a few commands on the lines maybe
make a little host file and you can plug the console into the terminal
server and
Look up Access Servers on CCO. Examples are the 2509 and 2511. You connect
to them either via the console or via Telnet. Each of the async ports then
connects to another routers console port. You can then switch which router
you wish to configure without touching any cables. Used in labs. Also
Hi all
I am trying to set up a DDR config but I am not sure I am on the right way.
Could you send me a sample config lines for that (serial interface and line
1) ?
My config for that:
line 1
modem InOut
transport input all
stopbits 1
flowcontrol hardware
I tried a reverse telenet:
Set length 0
Thanks
Stan Rossetti
Russia Services Group
Voice: (256) 544-5031
Email: [EMAIL PROTECTED]
Beeper: 544-1183 pin 0112
CCDA, CCNA, CCSE
-Original Message-
From: Edward Gomez [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 30, 2001 10:31 AM
To: '[EMAIL
Hi
I am not sure if it shows in the config or not, but did use set briding IRB?
HTH
--
John Hardman CCNP MCSE+I
""Ansari, Faisal (US/ATLANTA)"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Folks,
I have a question related to setting up routing between
Hi
Here is an excellent link that has the comparison of TACACS+ and RADIUS,
which would be a good thing to know.
http://www.cisco.com/univercd/cc/td/doc/cisintwk/intsolns/aaaisg/c262c1.htm
HTH
--
John Hardman CCNP MCSE+I
""Greg"" [EMAIL PROTECTED] wrote in message
955t43$hhf$[EMAIL
Well done Tim,
I am going for this test .. hopefully in March
Timothy Metz [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I just took the BSCN today and all I used was the Cisco Press book. I read
the book and then read it again while creating my own study
was there any IPX EIGRP questions?
"Timothy Metz" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I just took the BSCN today and all I used was the Cisco Press book. I read
the book and then read it again while creating my own study guide. So far,
the Cisco
Did you try Config Maker:
(In config maker, under router, you see the 805)
==
http://sj-webadv.cisco.com/cgi-bin/webisapi.dll?Session=367049,U=21553,ST=70,N=5,K=5963,P=Z,Case=483
==
--- Piatnitchi Cristian
[EMAIL PROTECTED] wrote:
I'm trying to get a clearer picture on the subject
Don't have a 2509 or 2511 and never saw one.
But on 3600 you can add NM-16A which is 16 port Async module or
you can add NM-16AM which is 16 port Analog modem module.
I know 3600 + NM-16AM is called an access server
Will 3600 + NM-16A be called
How can you forget your CCNP study ?
Do you have a 'Brain Leak' ?
I've been with CertificationZone for about a year now.
The white papers do not contain all the material you
will need to pass, which they happily admit to, but
they are very well written and tend to keep to a
certain formula
Well reverse telnetting is what you are doing when you go from line to line.
It is the protocol used and specified by using the port number 2000 + line
number. There are other protocols you can use by specifying other ports like
tcp raw, but who really cares your definition IS a better
Usually I try and stay out of the clutter related to books, but relating to
the Original posting for this thread(which I couldn't find) My personal
comments on the CiscoPress book are to read chapter 9 first. While studying,
be prepared to turn to it to clarify concepts. Sometimes you are so busy
Just want to put in a couple words on a topic I feel passionate about. If
people are converting copyrighted books to PDF and giving them away or
selling them, that's illegal, unethical, and stupid.
Obviously the publishing industry needs to come up with ways to get books
to people in formats
Hi,
Did anyone take the writen test CCIE-ISP recently?
If yes, what are the pricipals topics taked int the test?
TIA
Miguel lopez
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations
I cannot say that there were or were not, that would violate the NDA,
however I can say that I did not spend nearly as much time studying IPX
EIGRP scenarios as I did studying IP EIGRP scenarios.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Gopinath
Terminal Servers weren't born just to be terminal servers, they have other
uses. You could plug those async lines into modems instead of into other
router's console ports.
Brian
From: Ruben Arias [EMAIL PROTECTED]
Reply-To: Ruben Arias [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: AUX
At 11:03 AM 1/30/01, Thangavel .V.M wrote:
I have a question extending to this discussion, whether this early token
release will create a bus contention ?
It won't create bus contention since Token Ring is not a bus. But it can
reduce the amount of time a station has to wait for a free token,
Actually I'm one of the people that would much -prefer- to read a PDF over a
book. If I purchase a technical book that has the entire text in PDF
format, the only time I actually open the book itself is to get at the CD.
There are obvious piracy problems when the contents of a $50 book are
What does the following error message mean:
BOOTROM Version 2.1, Dated Jun 4 1996 12:02:33
BOOT date: 12/01/00
BOOT time: 21:38:29
SIMM RAM address test
SIMM Ram r/w 55aa
SIMM Ram r/w aa55
Uncompressing image. This will take a minute...
Module 1 failure due to CBL0, CBL1, or CBL2 Error
I was
You are currently on the ethernet interface, try adding the following command
on both routers:
bridge irb
brigde 1 route ip
Rich
On Jan 30, 6:48pm, [EMAIL PROTECTED] chatted about:
Subject:DLSW+ question
I am trying to setup two routers with DLSW+ , when I do with routing ,I can'=
t=20
According to Cisco's site:
Was this switch actively switching traffic at the time you reset
the switch?
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/c5krn/sw_rns/78_3829.htm#xtocid2465133
On 30 Jan 2001 15:50:05 -0500, [EMAIL PROTECTED] ("Mask Of
Zorro") wrote:
What does
I believe that the supervisor engine is faulty and would need replacing. If
you don't have a contract that can get expensive. CBL is the color blocking
logic. I think every line card has that. On the CCO site do a search on
"cbl error" and you get some info. Its all pretty sketchy though.
Syngress is definitely better...although I might be a bit biased (Im one of
the authors for that book!) :)
-Brad
"Wibowo Nur Susetio" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Dear All,
Any body have experience with sybex/syngress for CCNP Support
Good afternoon all,
just wishing this forum would really dump the topic about the
pdf's/books. There are tons of other places to go to find these
materials. I hope this place doesn't get saturated with "me toos".
Anyways.
I just recently bought a cisco 4000 router with the np-2t (2 serial
Please remove [EMAIL PROTECTED] from the mailing list.
Thanks.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Why not use an etherchannel connection for the isl link between the
switches. this would eliminate the single point of failure
Brant I. Stevens
Internetwork Solutions Engineer
Thrupoint, Inc.
545 Fifth Avenue, 14th Floor
New York, NY. 10017
646-562-6540
-Original Message-
From:
Has anyone taken it? If so I would like to speak to you so please email
me @ [EMAIL PROTECTED] if you have taken it.
Thank You.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations
Could you be a little more presice about what you want to know???
Rich
On Jan 30, 9:43pm, [EMAIL PROTECTED] chatted about:
Subject:CCIE Written
Has anyone taken it? If so I would like to speak to you so please email
me @ [EMAIL PROTECTED] if you have taken it.
Thank You.
What about physical port failure? Or cable failure (i.e. gets yanked
out by an idiot)?
That's the kind of failure I was thinking of when I mentioned the single
point.
Brant Stevens wrote:
Why not use an etherchannel connection for the isl link between the
switches. this would eliminate
For those that have used HSRP in your networks for redundant external
connections, how have you dealt with the "single point of failure" issue
when you have two routers, two switches and using ISL to run HSRP
between them?
I have two 7206VXR routers, two Cat 6509 switches. My current drawing
Anyone willing to part with the official CIPT course book? Email if
interested
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi Guys,
Could anyone please advice on how to set up a mac with ISDN30 to =
directly ftp into a far end router. What ppp authentication will be =
advisable to use, if at all this can be done..
_
FAQ, list archives, and subscription info:
Thank you for the information. I am stuggling with the use/purpose of VLANs
and you've answered some questions for me.
In article [EMAIL PROTECTED],
[EMAIL PROTECTED] (John Neiberger) wrote:
A VLAN is, by definition, a separate subnet. If you decided to separate a
single LAN into two VLANs,
You'll have to find a document covering Sup I architecture. Look for
Pinnacle. The document below covers error messages. It will shed a little
more light on what is being reported. It seems like a good idea not to buy
that card unless you learn that the message is benign.
From:
A trunked EtherChannel link would cover those problems...
Brant I. Stevens
Internetwork Solutions Engineer
Thrupoint, Inc.
545 Fifth Avenue, 14th Floor
New York, NY. 10017
646-562-6540
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Jim Healis
Sent:
1 - 100 of 160 matches
Mail list logo
